CY8C29866-24AXI - 24MHz 32KB PSoC 1 MCU | Infineon
MPN: CY8C29866-24AXI ✓ सक्रियCY8C29866-24AXI अवलोकन
A PSoC mixed-signal array is a programmable system-on-chip that integrates a microcontroller core with configurable digital blocks and analog peripherals. In the broader semiconductor hierarchy, it belongs to the embedded-microcontroller family rather than a discrete analog or digital component. The architecture allows designers to assign peripheral functions and signal routing in software, making it useful where fixed-function pin arrangements are less practical.
Three principal characteristics define the CY8C29866-24AXI: its 24 MHz M8C processing core, 32 KB of embedded flash, and 16 configurable universal digital blocks. The device also provides 64 GPIO according to the manufacturer documentation and includes I2C, SPI, and UART interfaces. This combination supports control loops, serial communications, and mixed-signal peripheral functions without requiring a separate microcontroller for every function.
The 32 KB flash capacity stores application firmware, while the 2 KB SRAM supports working data, stack operations, and peripheral buffering. Its 8-bit M8C architecture is intended for compact embedded systems rather than high-throughput computing. The 100-pin TQFP package provides access to a comparatively broad set of GPIO and mixed-signal resources, but it also requires careful planning for routing, decoupling, exposed-pad handling, and assembly.
Typical uses include industrial control panels, sensor-conditioning systems, communication equipment, data-acquisition modules, and compact embedded control products. In each case, the programmable peripheral architecture can simplify hardware customization while the M8C CPU handles sequencing, communications, and supervisory control.
The principal design consideration is power and signal integrity. Place the device bypass capacitors close to the supply pins, route sensitive analog signals away from fast digital nets, and validate the chosen external component values against the manufacturer’s PSoC 1 configuration guidance before production release.
This page combines the manufacturer’s PSoC 29x66 specifications with application guidance, interface-focused design notes, and a structured comparison framework. It is intended to help engineers evaluate memory resources, GPIO capacity, serial interfaces, package implementation, and verified replacement options before schematic capture.
के लिए ड्रॉप-इन विकल्प CY8C29866-24AXI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंCY8C29866-24AXI Maximum Ratings और Electrical Characteristics
| Product Type | PSoC 1 mixed-signal microcontroller |
| CPU Core | 8-bit M8C |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| Universal Digital Blocks | 16 blocks |
| GPIO Count | 64 GPIO |
| Minimum Operating Voltage | 3 V |
| Maximum Operating Voltage | 5.25 V |
| ऑपरेटिंग तापमान रेंज | -40°C to +85°C |
| पैकेज | 100-pin TQFP, 14 mm x 14 mm |
| माउंटिंग प्रकार | Surface mount |
| Digital Interfaces | I2C, SPI, and UART |
CY8C29866-24AXI 100-pin tqfp, 14 mm x 14 mm पिन कॉन्फ़िगरेशन गाइड
CY8C29866-24AXI (100-pin tqfp, 14 mm x 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: CY8C29866-24AXI.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
CY8C29866-24AXI के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Panels, Sensor Conditioning Systems, Communication Equipment, Data Acquisition Modules, Programmable Logic Controllers, Embedded Measurement Instruments.
Industrial Control Panels
The CY8C29866-24AXI fits compact industrial panels that combine supervisory logic, indicator control, communications, and configurable digital functions. Its 24 MHz M8C processor can coordinate I2C, SPI, or UART-connected modules, while 16 universal digital blocks reduce reliance on fixed-function peripheral arrangements. The 64 GPIO capability supports keys, status signals, relays, and sensor inputs. Designers should reserve the 2 KB SRAM for realistic buffer sizes and use the -40°C to +85°C operating range for ordinary industrial enclosure conditions.
Sensor Conditioning Systems
The PSoC 1 architecture makes the CY8C29866-24AXI appropriate for sensor modules that need programmable signal routing and both analog and digital control functions. Sixteen universal digital blocks can support timing, capture, or communications-related functions, while 64 GPIO allows multiple sensors and actuators to share the controller. The 24 MHz core provides deterministic sequencing, but the 2 KB SRAM requires careful batching rather than large real-time sample buffers. Final analog routing and external component values must follow the manufacturer configuration guidance.
Communication Equipment
The CY8C29866-24AXI can serve as the supervisory controller in compact communication equipment built around I2C, SPI, and UART peripherals. The 8-bit M8C core handles protocol coordination, configuration, status reporting, and low-level control, while 32 KB flash holds application firmware. Its 100-pin TQFP package exposes substantial GPIO for status LEDs, reset control, and external interfaces. Firmware designers should budget SRAM for protocol buffers and verify that the selected transceiver and connector electrical requirements are met outside the MCU.
Data Acquisition Modules
The CY8C29866-24AXI is suitable for small data-acquisition modules where flexible routing and configurable peripherals are more valuable than a large general-purpose processor. Sixteen universal digital blocks can implement timing and control tasks, and I2C or SPI can connect external converters or sensors. The 24 MHz M8C core supports sampling orchestration and data formatting, while the 2 KB SRAM constrains simultaneous buffering. Designers should calculate worst-case memory use at the target sample rate and avoid relying on an analog block count until confirmed in the manufacturer resource map.
Programmable Logic Controllers
The CY8C29866-24AXI can serve as the core of a small programmable logic controller for machine controls, lighting sequences, alarm panels, or building equipment. Its 16 universal digital blocks and 64 GPIO provide substantial configurable I/O, while I2C, SPI, and UART simplify connections to sensors, expanders, and communication modules. Firmware can implement deterministic state machines and safety monitoring. Before production, verify startup behavior, brownout requirements, output drive limits, and expansion methods against the manufacturer datasheet.
Embedded Measurement Instruments
The CY8C29866-24AXI supports embedded measurement instruments that combine control, communications, and signal conditioning in one controller. The 24 MHz M8C core can supervise measurements, the programmable digital architecture can replace several fixed-function blocks, and 32 KB flash accommodates a focused application program. I2C and SPI simplify attachment to external converters, while UART supports a host or service interface. Because only 2 KB SRAM is available, use streaming or buffered-transfer techniques and validate memory headroom under worst-case operating conditions.
के लिए इंजीनियरिंग संदर्भ डेटा CY8C29866-24AXI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Package | 100-pin TQFP, 14 mm x 14 mm |
| Brand | Infineon Technologies |
| CPU Core | 8-bit M8C |
| Maximum CPU Frequency | 24 MHz |
| Flash Memory | 32 KB |
| SRAM | 2 KB |
| Universal Digital Blocks | 16 blocks |
| GPIO Count | 64 GPIO |
| Operating Voltage Range | 3 V to 5.25 V |
| Operating Temperature Range | -40°C to +85°C |
डिज़ाइन नोट्स
Assign all 100 package connections from the manufacturer pin-description table rather than from a generic TQFP drawing. Route each supply pin to the appropriate plane, provide the recommended local bypass capacitance, and connect the exposed pad according to the datasheet land pattern. The 14 mm by 14 mm footprint has dense pitch, so verify the assembler’s minimum trace, via, and solder-mask capabilities before releasing artwork.
The device operates from 3 V to 5.25 V, so confirm that every supply rail remains within its allowable range during startup, reset, and peripheral activity. Decouple the MCU supply close to the pins and treat analog supply requirements as a separate routing and decoupling task when enabled. If external circuitry shares the supply, calculate its startup current and voltage droop against the minimum operating voltage rather than checking only the nominal rail.
Use the PSoC routing rules in the manufacturer configuration guidance to assign external signals to compatible pins. Keep sensitive analog inputs away from switching-node and high-current return paths, and provide a quiet ground reference for measurement circuitry. Validate each programmable digital block and peripheral allocation in the device configuration because the available clocking, interrupt, and routing relationships may constrain the final pin map.
Budget the 2 KB SRAM for stack, variables, interrupt context, protocol buffers, and peripheral state; the nominal capacity is not entirely available for application data. Confirm that 32 KB flash is sufficient for the bootloader, operating system or library code, and application firmware. A functional replacement must also reproduce the PSoC peripheral configuration, so a generic 8-bit MCU with the same clock frequency is not necessarily a functional or pin-compatible substitute.
अनुपालन जानकारी
The listed product information does not state the device-specific compliance status. Confirm current declarations and qualification information with Infineon before procurement or production release.