KSZ8841-16MVLI - 10/100 Ethernet Controller | Microchip
MPN: KSZ8841-16MVLI ✓ सक्रियKSZ8841-16MVLI अवलोकन
An Ethernet MAC controller is a network interface integrated circuit that manages frame transmission, reception, addressing, and the connection between a host processor and an Ethernet physical layer. The KSZ8841 belongs to the Ethernet controller hierarchy, which combines a MAC controller, 10/100 Base-T/TX PHY, and a generic host-bus interface in a single mixed-signal device. This integration reduces external components and simplifies the relationship between the processor bus and an RJ45 network connection.
The KSZ8841 supports 8-bit, 16-bit, and 32-bit generic host-processor interfaces. The -16MVLI configuration uses a 16-bit interface, while its dynamic memory pointer maintains a 4-byte buffer boundary for host-memory transfers. A dedicated integrated PHY provides 10/100 Base-T/TX operation, while Wake-on-LAN support addresses power-conscious embedded systems that must respond to remote network activity.
The controller combines digital frame-processing logic with analog Ethernet transceiver circuitry. Its host interface provides a direct path between the Ethernet MAC and processor-managed memory, reducing the need for a separate Ethernet interface component. In systems requiring wider bus bandwidth, the related 32-bit controller option can move data in wider transactions, although the exact memory-transfer rate still depends on processor timing, wait states, and the physical interface implementation.
Typical uses include industrial embedded controllers, factory automation equipment, print servers, set-top boxes, embedded servers, and network-enabled data-acquisition systems. In an industrial controller, the device can connect an embedded processor to a 10/100 network while supporting remote wake-up for maintenance systems. In compact embedded products, integrating the PHY and MAC into one package reduces board area compared with a discrete MAC and external transceiver arrangement.
PCB design should preserve the Ethernet magnetics and high-speed signal path, provide the decoupling and grounding specified by the manufacturer datasheet, and keep the processor-bus traces short. The 128-LQFP footprint requires careful escape routing because the generic host interface uses many pins. Confirm the complete pin assignment, voltage requirements, clocking, and reset behavior against the manufacturer pin-description table before routing the board.
This product page combines the manufacturer interface description, verified ordering information, package details, and practical selection guidance. It also organizes pin, replacement, application, and sourcing questions around the distinctions that matter when integrating this Ethernet controller into a new embedded design.
के लिए ड्रॉप-इन विकल्प KSZ8841-16MVLI — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं KSZ8841-16MVLI (समान फॉर्म फैक्टर और फुटप्रिंट).
KSZ8841-16MBL
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8841-32MVLI
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →KSZ8841-16MVL
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8841-16MBLI
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8842-16MVLI
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
KSZ8841-16MVLI विशेषताएं
| Device Type | Single-port Ethernet MAC controller with integrated PHY |
| Ethernet Speed | 10/100 Mb/s |
| Physical Layer Standard | 10/100 Base-T/TX |
| Host Interface Width | 16 bit |
| Family-Supported Host Interface Widths | 8/16/32 bit |
| Ethernet Port Count | 1 port |
| Wake-on-LAN Support | Yes |
| Dynamic Memory Pointer Boundary | 4 byte |
| पैकेज | 128-LQFP |
| Package Dimensions | 14 x 14 mm |
| Lead Count | 128 leads |
| माउंटिंग प्रकार | Surface mount |
| CPU Interface Type | Generic host processor interface |
| Device Architecture | Mixed-signal single-chip MAC controller and PHY |
| RoHS स्थिति | Unknown |
KSZ8841-16MVLI 14 x 14 mm पिन कॉन्फ़िगरेशन गाइड
KSZ8841-16MVLI (14 x 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: KSZ8841-16MVLI.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
KSZ8841-16MVLI के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Embedded Network Data Acquisition, Networked Print Server, Set-Top and Media Terminal, Remote Monitoring Sensor Node, Network-Enabled Embedded Appliance.
Industrial Automation Controller
The KSZ8841-16MVLI is well suited to an embedded industrial controller that must exchange real-time commands, status data, and diagnostic records over 10/100 Ethernet. Its integrated 10/100 Base-T/TX PHY eliminates a separate Ethernet transceiver, while the 16-bit generic host interface provides a practical path to an embedded processor and DMA-managed memory. The dynamic memory pointer maintains a 4-byte buffer boundary, simplifying alignment for 32-bit processor systems. Wake-on-LAN can support maintenance access when the controller retains network power. The principal layout concern is keeping the host-bus escape routes short while isolating the Ethernet line-side and magnetics connection from sensitive digital circuitry.
अनुशंसित
Embedded Network Data Acquisition
A data-acquisition terminal can use the KSZ8841-16MVLI to place measurements, configuration records, and alarm events onto a 10/100 Mb/s network. The integrated MAC and PHY consolidate the protocol and physical-layer functions, while the 16-bit host bus supports efficient access to sample buffers in processor memory. The 4-byte memory-pointer boundary helps maintain consistent buffer alignment during transfers. Wake-on-LAN is useful for remote test systems that can retain a low-power Ethernet island while the main processor is suspended. Designers should account for burst traffic, avoid packet-buffer overload in firmware, and verify that the host timing scheme satisfies the manufacturer interface requirements.
अनुशंसित
Networked Print Server
The KSZ8841-16MVLI can provide the wired network connection in an embedded print server, scanner, or document-processing peripheral. A 16-bit processor interface allows the MAC to share the processor bus without requiring a high-speed graphics-class bus, and the integrated 10/100 PHY supports a compact board layout. Wake-on-LAN enables remote deployment and maintenance in printer rooms or offices where the device may otherwise enter a low-power state. Firmware should support link changes, frame filtering, and resume from the Wake-on-LAN pattern. The Ethernet magnetics and line-side components should be placed according to the manufacturer reference layout to maintain signal integrity.
अनुशंसित
Set-Top and Media Terminal
The KSZ8841-16MVLI is suitable for media terminals and set-top products requiring a wired 10/100 connection for control, firmware update, or protected content delivery. Its single-port MAC/PHY integration limits the external Ethernet component count, and the generic 16-bit interface gives embedded processors flexible bus access. Wake-on-LAN can reduce the need for physical interaction during installation or recovery. The design should prioritize deterministic host-bus timing, clean supply rails, and controlled reset behavior. Firmware must also protect management functions because the same network path used for media traffic may provide remote update access.
अनुशंसित
Remote Monitoring Sensor Node
The KSZ8841-16MVLI can connect a monitoring node that aggregates environmental, process, or equipment measurements and forwards them to a supervisory network. The 10/100 Base-T/TX capability provides adequate bandwidth for typical telemetry, while the integrated PHY supports a compact implementation. Wake-on-LAN allows a supervisory system to contact a node that retains Ethernet power but has suspended its main processor. Firmware should distinguish valid management packets from routine traffic and control the Ethernet interface during low-power transitions. Power-supply and clock design must prevent link instability, since network availability is critical to remote diagnostics.
अनुशंसित
Network-Enabled Embedded Appliance
The KSZ8841-16MVLI can add wired Ethernet to an embedded appliance without requiring a separate MAC and PHY combination. The 16-bit host interface is appropriate for processor buses that can sustain 10/100 Mb/s traffic with suitable protocol efficiency, and the single-port topology matches appliances with one cable connection. Wake-on-LAN supports installation and recovery without physical access. Integration requires careful partitioning of the host bus from the Ethernet line interface, correct filtering of the magnetics network, and firmware handling of link-up, link-down, and reset events. The design should also provide adequate copper area and thermal performance for the 128-LQFP package.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा KSZ8841-16MVLI — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | KSZ8841-16MBL | KSZ8841-32MVLI | KSZ8841-16MVL | KSZ8841-16MBLI | KSZ8842-16MVLI |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 128-LQFP (14 x 14 mm) | 128-LQFP | 128-LQFP | 128-LQFP | 128-LQFP | 128-LQFP |
| Host Interface Width | 16 bit | 16 bit | 32 bit | 16 bit | 16 bit | 16 bit |
| CPU Interface | Generic non-PCI host processor interface | Generic non-PCI host processor interface | Generic non-PCI host processor interface | Generic non-PCI host processor interface | Generic non-PCI host processor interface | Generic host processor interface |
मुख्य विशेषताएँ
- Integrated single-port MAC and 10/100 PHY (बनामKSZ8841-16MBL)
- Nominal 16-bit host-interface balance (बनामKSZ8841-32MVLI)
- Single-port 10/100 integration with Wake-on-LAN (बनामKSZ8041TLI-TR)
डिज़ाइन नोट्स
Route the Ethernet line-side connection according to the manufacturer reference layout, keeping the controller, magnetics, and network-side components in the defined relative positions. Avoid placing high-current switching traces beneath the Ethernet interface area. The 128-LQFP footprint also requires deliberate pin-escape planning so host-bus routing does not compromise the placement of the magnics and its associated bypass components.
Keep the 16-bit host-processor bus traces short and route them away from the transformer and line-side Ethernet nodes. Use a continuous ground reference beneath the device and follow the manufacturer pin-description table for every supply, clock, reset, and interface connection. Host timing must satisfy the controller's access-cycle requirements without excessive wait states that reduce effective packet throughput.
Provide the supply rails and bypass capacitors specified by the manufacturer datasheet directly at the corresponding package pins. Separate noisy digital return currents from the Ethernet and magnetics return path where the reference layout specifies a partition. Validate startup, reset release, and low-power transitions at the system level because incorrect sequencing can leave the PHY, host bus, or Wake-on-LAN receiver in an indeterminate state.
Do not substitute a controller solely because both devices use a 16-bit host interface. Confirm the package drawing, complete pin names, electrical limits, clocking, reset polarity, PHY behavior, and software-visible registers for every replacement. The -16MVLI ordering code also encodes device-specific characteristics, so an ordering-code change must be reviewed rather than treated as a guaranteed drop-in substitution.
अनुपालन जानकारी
The product listings identify RoHS as a catalog attribute but do not provide a definitive compliance declaration. No specific AEC-Q100 qualification, REACH declaration, halogen-free statement, or conflict-minerals statement was established.