LAN9360A-I/CQBT-100 - AVB Ethernet Controller | Microchip
MPN: LAN9360A-I/CQBT-100 ✗ जीवन की समाप्तिLAN9360A-I/CQBT-100 अवलोकन
An Intelligent Ethernet Controller is an interface IC that combines Ethernet media access control, AVB endpoint functions, audio streaming, and host connectivity. In the product hierarchy, it belongs to Ethernet controllers, then network controllers and processors, and finally interface integrated circuits. This integration allows one device to bridge an RMII Ethernet port, digital audio, configuration registers, and external storage or host connectivity on a compact PCB.
The controller supports AVB endpoints implementing gPTP, AVTP, RTP, and CRF-related functions identified by Microchip for the LAN9360 family. Its seven-stream, 40-channel AVB capability supports professional audio, automotive infotainment, industrial audio, and distributed sound systems where multiple synchronized channels must travel over Ethernet. The available I2S interface connects to digital audio codecs and DSPs, while I2C and SPI provide configuration paths to application processors.
The RMII interface provides the conventional Ethernet media connection, and the USB interface adds another pathway for configuration, control, or peripheral integration. Combining these interfaces in one controller reduces the number of discrete bridge devices required in an AVB endpoint and can simplify firmware architecture. The compact 9 x 9 mm TFBGA also places the Ethernet, audio, and control functions within a single high-density land pattern.
Typical uses include professional audio consoles, automotive audio domains, networked amplifiers, AVB speakers, industrial monitoring stations, and test equipment requiring synchronized audio transport. In a networked amplifier, the LAN9360A-I/CQBT-100 could receive synchronized streams over Ethernet, expose audio to a codec or DSP through I2S, and provide configuration through I2C or SPI. In a head unit, the RMII and USB interfaces support network services and local control while the AVB functions maintain timing alignment across distributed audio endpoints.
Designers should follow the complete pin-description table, reference clock requirements, and recommended decoupling network in the manufacturer data sheet before layout. The high-density BGA footprint requires careful escape routing, a solid ground plane, and adequate via access beneath the device. Differential Ethernet routing, I2S clock integrity, and MPCI/AVB timing verification are equally important because these interfaces each have distinct routing and signal-integrity constraints.
के लिए ड्रॉप-इन विकल्प LAN9360A-I/CQBT-100 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
LAN9360C-I/CQBT-101
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LAN9360C-I/CQB-101
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LAN9360A-I/CQB-100
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →LAN9360A-I/CQBT-100 विशेषताएं
| Device Type | Intelligent Ethernet Controller with integrated AVB endpoint support |
| Manufacturer | Microchip Technology |
| Maximum AVB Streams | 7 streams |
| Maximum AVB Channels | 40 channels |
| Host and Control Interfaces | I2C, I2S, RMII, SPI, and USB |
| Ethernet Interface | RMII |
| Digital Audio Interface | I2S |
| Serial Configuration Interfaces | I2C and SPI |
| USB Interface | USB host interface |
| AVB Protocol Functions | gPTP, AVTP, RTP, and CRF |
| Standards Validation | IEEE, Avnu Alliance, and IETF standards |
| Package Type | 100-TFBGA |
| Package Dimensions | 9 mm x 9 mm |
| माउंटिंग प्रकार | Surface Mount |
| लाइफसाइकिल स्थिति | End of Life |
| Recommended Successor | LAN9360C series |
| RoHS स्थिति | Specialized RoHS |
LAN9360A-I/CQBT-100 9 mm x 9 mm पिन कॉन्फ़िगरेशन गाइड
LAN9360A-I/CQBT-100 (9 mm x 9 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LAN9360A-I/CQBT-100.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LAN9360A-I/CQBT-100 के लिए उपयुक्त है 6 अनुप्रयोगs: Professional Networked Audio Console, Automotive Infotainment Audio Endpoint, Networked Amplifier and Speaker Endpoint, Industrial Audio Monitoring Station, AVB Network Test and Measurement Equipment, Distributed Sound System.
Professional Networked Audio Console
The LAN9360A-I/CQBT-100 fits a professional console that transports multiple synchronized audio streams over Ethernet. Its 7-stream, 40-channel AVB capacity provides headroom for channel groups, while RMII connects to the Ethernet media interface and I2S links the controller to audio codecs or DSPs. I2C or SPI can handle configuration registers and peripheral control, and USB supports a local service or host connection. The practical benefit is consolidating AVB timing, audio transport, Ethernet access, and control into one controller. System validation should still cover sample-rate compatibility, clock-source configuration, stream format, and network bandwidth for the largest expected session.
अनुशंसित
Automotive Infotainment Audio Endpoint
The controller is suitable for an infotainment endpoint that combines vehicle networking with digital audio processing. RMII provides a direct Ethernet controller interface, I2S connects to a class-D amplifier chain or audio DSP, and I2C or SPI can support configuration and diagnostics. AVB timing capabilities can maintain synchronization across vehicle audio zones where the selected ordering code satisfies the required environmental and qualification conditions. Because the verified ordering information does not establish a specific automotive qualification class, engineers should confirm the temperature grade and qualification report with Microchip before releasing a vehicle-production design.
अनुशंसित
Networked Amplifier and Speaker Endpoint
A networked amplifier can use the LAN9360A-I/CQBT-100 to receive synchronized AVB audio over Ethernet and forward it to a DSP or power amplifier through I2S. The controller's 7-stream and 40-channel capacity allows a single endpoint to manage several logical streams without requiring a separate protocol engine for each channel. RMII keeps the media interface familiar, while I2C and SPI provide configuration paths for gain, routing, and diagnostics. Design verification should include worst-case latency, gPTP clock behavior, stream reservation assumptions, and recovery behavior when the upstream switch or network link changes.
अनुशंसित
Industrial Audio Monitoring Station
The LAN9360A-I/CQBT-100 can serve as the communications hub in an industrial monitoring station that distributes synchronized alarm and diagnostic audio. Its Ethernet RMII path supports networked operation, I2S carries channel audio into a monitoring codec, and USB may provide local configuration, logging, or service connectivity. The integrated AVB endpoint functions allow timing-aware transport rather than relying only on best-effort packet delivery. For dependable operation, qualify the Ethernet physical layer, isolate noisy analog inputs, verify the clock-recovery strategy under packet loss, and test restart behavior after power or link interruptions.
अनुशंसित
AVB Network Test and Measurement Equipment
The controller is appropriate for test equipment that must act as a standards-oriented AVB endpoint while also providing local audio and control functions. RMII supports connection to a network test port, I2S exposes synchronized channels to a scope or signal chain, and USB can simplify workstation control. The 7-stream, 40-channel endpoint capability allows the instrument to exercise multiple simultaneous transport conditions. Firmware should expose explicit stream status, gPTP state, and error counters so engineers can distinguish source timing problems from endpoint or PHY failures. Use the same AVB compliance procedures expected for an interoperable endpoint.
अनुशंसित
Distributed Sound System
The LAN9360A-I/CQBT-100 suits distributed speaker and zone-controller designs in which audio originates on a network rather than a local analog bus. Up to 7 AVB streams and 40 channels allow synchronized content to be distributed to endpoints, while RMII connects each endpoint to the network and I2S feeds the local amplifier or DSP. I2C and SPI provide a control path for zone configuration, and USB can assist with installation or diagnostics. The engineering focus is clock-domain planning: confirm the synchronization reference, network topology, packet-loss margin, and output latency before defining the user experience for lip-sync and echo control.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LAN9360A-I/CQBT-100 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LAN9360C-I/CQBT-101 | LAN9360C-I/CQB-101 | LAN9360A-I/CQB-100 |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 100-TFBGA (9x9) | 100-TFBGA (9x9) - same footprint | 100-TFBGA (9x9) - same footprint | 100-TFBGA (9x9) - same footprint |
| Device Type | Intelligent Ethernet Controller with AVB endpoint support | Intelligent Ethernet Controller with AVB endpoint support | Intelligent Ethernet Controller with AVB endpoint support | Intelligent Ethernet Controller with AVB endpoint support |
| Maximum AVB Streams | 7 streams | 7 streams | 7 streams | 7 streams |
| Maximum AVB Channels | 40 channels | 40 channels | 40 channels | 40 channels |
| Host and Control Interfaces | I2C, I2S, RMII, SPI, and USB | I2C, I2S, RMII, SPI, and USB | I2C, I2S, RMII, SPI, and USB | I2C, I2S, RMII, SPI, and USB |
| AVB Protocol Functions | gPTP, AVTP, RTP, and CRF | gPTP, AVTP, RTP, and CRF | gPTP, AVTP, RTP, and CRF | gPTP, AVTP, RTP, and CRF |
| AC and DC Characteristics | LAN9360A reference characteristics | Same as LAN9360A | Same as LAN9360A | Same as LAN9360A |
| Pin Compatibility | 100-TFBGA reference pinout | Pin-to-pin compatible with LAN9360A | Pin-to-pin compatible with LAN9360A | Pin-to-pin compatible LAN9360A configuration |
| Lifecycle Status | End of Life | LAN9360C successor family | LAN9360C successor family | End of Life |
मुख्य विशेषताएँ
- Manufacturer-endorsed pin-to-pin migration path (बनामLAN9360C-I/CQBT-101)
- Integrated multi-interface AVB endpoint architecture (बनामLAN9360A-I/CQB-100)
- Single-device consolidation for networked audio (बनामKSZ8041TLI-TR)
डिज़ाइन नोट्स
The 100-TFBGA land pattern requires a via-in-pad or escape-routing strategy for each required signal. Place the Ethernet PHY or magnetics, audio codec, and reference-clock circuitry close enough to minimize trace length while preserving continuous return paths under the BGA. Maintain a low-impedance ground plane and use the manufacturer footprint, solder-mask, and paste recommendations rather than generating a generic TFBGA pad array.
Treat RMII, I2S, and the reference clock as separate high-speed design problems. Keep I2S data and clock traces short, match length where the codec and controller require it, and avoid routing them parallel to Ethernet or USB activity. Follow the Ethernet interface layout guidance for the PHY or magnetics, including return vias and isolation from audio clocks, to reduce timing violations and audible noise coupling.
Do not treat the LAN9360C migration as an unrestricted ordering-code substitution. Microchip states that LAN9360A and LAN9360C are pin-to-pin compatible with matching AC and DC characteristics, but the exact suffix still determines grade and orderable configuration. Check the clocking method, temperature range, package, firmware support, and qualification documentation before replacing the EOL LAN9360A-I/CQBT-100 in production.
अनुपालन जानकारी
The verified JLCPCB product record identifies the LAN9360A-I/CQBT-100 as Specialized RoHS. REACH, halogen-free, conflict-minerals, and automotive qualification statements were not identified for this exact ordering code.