LC4256C-3T176C - SuperFAST In-System Programmable CPLD | Lattice
MPN: LC4256C-3T176C ✓ सक्रियLC4256C-3T176C अवलोकन
A CPLD is a programmable-logic device that stores its digital design in nonvolatile configuration memory and implements the design as combinational and registered logic. Within the semiconductor hierarchy, a CPLD occupies the position between simple fixed-function gates and larger FPGAs. It offers a practical balance of large logic capacity, predictable routing and relatively straightforward device programming for control logic, interface bridging and industrial system support.
The ispMACH 4000 architecture blends elements of the ispLSI 2000 and ispMACH 4A families, as described by Lattice Semiconductor. Multi-voltage operation gives designers flexibility when connecting the device to 3.3 V, 2.5 V or 1.8 V system domains. In-system programming supports configuration updates through the JTAG interface and can simplify production programming, prototype modification and maintenance operations.
The LC4256C-3T176C is identified as a commercial-temperature, -3 speed-grade member of the LC4256 device family. Its 176-terminal LFQFP package provides 128 outputs according to the device listing data. The square surface-mount format supports dense designs, although its 176 leads require a careful escape-routing strategy between the device and smaller companion components.
Typical applications include industrial control and automation modules, peripheral-interface bridges, multi-voltage system consolidation, legacy equipment modernization and embedded control platforms that benefit from deterministic programmable logic. The in-system programming feature is especially useful in systems where firmware-style logic updates are preferred over physically replacing the device.
When laying out the LC4256C-3T176C, route programming signals away from sensitive analog and high-speed nets, provide clean ground distribution beneath the package, and check every external interface against the device's supported voltage domains. Because the -3 suffix identifies the speed grade, timing-sensitive paths should be evaluated with the same speed-grade data used for the production design. Use the manufacturer datasheet pin table when assigning PCB nets and when verifying package compatibility for any substitute.
This page combines package and architecture details with drop-in family alternatives, parameter comparisons, sourcing guidance and practical layout notes that help engineers evaluate the LC4256C-3T176C before committing to a PCB footprint.
के लिए ड्रॉप-इन विकल्प LC4256C-3T176C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
LC4256C-3TN176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256B-3T176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256C-5TN176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256C-75T176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256ZC-45T176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256V-75T176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256V-75TN176C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256C-3T176C Maximum Ratings और Electrical Characteristics
| Device Type | Complex Programmable Logic Device (CPLD) |
| Product Family | ispMACH 4000 |
| Architecture | SuperFAST high-density PLD |
| Programming Method | In-System Programmable (ISP) |
| Supported Supply Voltages | 3.3 V / 2.5 V / 1.8 V |
| Number of Terminals | 176 |
| आउटपुट की संख्या | 128 |
| Package Code | LFQFP |
| Package Shape | Square |
| Terminal Form | Gull wing |
| माउंटिंग प्रकार | Surface mount |
| Speed Grade | -3 |
| Temperature Grade | Commercial (C suffix) |
| RoHS स्थिति | unknown |
LC4256C-3T176C square पिन कॉन्फ़िगरेशन गाइड
LC4256C-3T176C (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LC4256C-3T176C.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LC4256C-3T176C के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control and Automation, Multi-Voltage System Interface Bridging, Peripheral Interface Consolidation, Embedded Communication Control, Legacy Equipment Modernization, Data Acquisition and Test Control.
Industrial Control and Automation
The LC4256C-3T176C fits industrial control modules that require programmable state-machine logic, interface decoding and deterministic signal handling. Its ispMACH 4000 architecture, 176-terminal package and in-system programming support allow control behavior to be revised during commissioning or maintenance without replacing the assembly. The -3 speed grade provides a useful timing margin for externally generated control signals, while 3.3 V, 2.5 V and 1.8 V support simplifies connections across mixed-voltage subsystems. Use the manufacturer timing tables to verify every external path and keep programming traces isolated from sensitive analog networks.
अनुशंसित
Multi-Voltage System Interface Bridging
The LC4256C-3T176C can consolidate logic between 3.3 V, 2.5 V and 1.8 V system domains in equipment that evolved through mixed-voltage upgrades. Its 176 terminals and 128 listed outputs provide substantial I/O capacity for translating control levels, qualifying asynchronous inputs and implementing bus protocol front ends. The in-system programming architecture also allows interface logic to be revised when equipment is deployed in different field configurations. Verify the supply and signal-level rules for each bank, because package compatibility alone does not establish that every voltage configuration is interchangeable.
अनुशंसित
Peripheral Interface Consolidation
In a peripheral controller, the LC4256C-3T176C can implement address decoding, command sequencing, interrupt control and data-format conversion in one programmable device. The CPLD architecture offers a practical alternative to a collection of discrete glue-logic ICs and supports in-system updates when firmware revisions require a revised interface state machine. Its 176-lead square LFQFP footprint places a premium on PCB escape routing, so designers should plan the routing channels early. Validate setup and hold timing against external peripherals rather than relying only on internal block timing.
अनुशंसित
Embedded Communication Control
The LC4256C-3T176C is suitable for front-end logic in communication equipment that needs deterministic channel control, packet filtering or clock-domain crossing. Programmable logic can supervise resets, qualify incoming requests and coordinate configuration registers independently of a main processor. In-system programmability is valuable in network appliances where field diagnostics may need to change the control path without factory rework. The -3 speed grade helps preserve margin on synchronous interfaces, but all asynchronous crossings must be analyzed with the device timing library and system clock-uncertainty budget.
अनुशंसित
Legacy Equipment Modernization
LC4256C-3T176C can replace a collection of discrete programmable and fixed-function logic blocks in aging industrial equipment while preserving a controlled migration path. Its in-system programming capability supports production programming, diagnostics and controlled configuration updates, while the SuperFAST architecture targets short predictable routing paths. Because it is a mature LC4256C-family device with many terminals, careful attention is needed to fanout, power delivery and signal integrity. A transition plan should include a full pin-by-pin comparison, timing revalidation and confirmation that programming-tool support remains adequate for the production lifetime.
अनुशंसित
Data Acquisition and Test Control
The LC4256C-3T176C can implement trigger sequencing, channel multiplexing control and test-status decoding in data-acquisition systems. Its programmable logic can coordinate external converters and programmable sources while in-system programming permits bench diagnostics and revised test sequences. The device is appropriate where deterministic control is needed more than maximum general-purpose parallelism, and the 176-terminal footprint provides many dedicated routing options. Keep sensitive analog and reference nets away from programming and high-switching-rate signals, and use the datasheet timing specifications to establish acquisition timing margins.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LC4256C-3T176C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LC4256C-3TN176C | LC4256B-3T176C | LC4256C-5TN176C | LC4256C-75T176C | LC4256ZC-45T176C |
|---|---|---|---|---|---|---|
| Package | TQFP-176 (LFQFP), square, gull wing | TQFP-176 (LFQFP), square, gull wing | TQFP-176 (LFQFP), square, gull wing | TQFP-176 (LFQFP), square, gull wing | TQFP-176 (LFQFP), square, gull wing | TQFP-176 (LFQFP), square, gull wing |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Device Type | SuperFAST high-density CPLD | SuperFAST high-density CPLD | SuperFAST high-density PLD | SuperFAST high-density PLD | SuperFAST high-density PLD | SuperFAST high-density PLD |
| Product Family | ispMACH 4000 / LC4256C | ispMACH 4000 / LC4256C | ispMACH 4000 / LC4256B | ispMACH 4000 / LC4256C | ispMACH 4000 / LC4256C | ispMACH 4000 / LC4256Z |
| Speed Grade | -3 | -3 | -3 | -5 | -75 | -45 |
| Number of Terminals | 176 | 176 | 176 | 176 | 176 | 176 |
| In-System Programming | Yes | Yes | Yes | Yes | Yes | Yes |
मुख्य विशेषताएँ
- Faster -3 speed grade within the same family (बनामLC4256C-75T176C)
- Current-generation option with unchanged speed designation (बनामLC4256B-3T176C)
- High terminal count consolidates extensive glue logic (बनामLC4256C-75T176C)
डिज़ाइन नोट्स
The 176-lead square LFQFP requires fine-pitch escape routing between the device and smaller companion components. Follow the manufacturer package drawing for land pattern, pad dimensions and exposed thermal considerations. Route programming signals away from precision analog inputs and high-edge-rate nets, and avoid splitting ground-plane regions under the device. Because no exposed-pad thermal design is indicated for this package, do not add thermal-via assumptions without checking the actual drawing.
Plan the 3.3 V, 2.5 V and 1.8 V supply connections according to the device's bank and configuration requirements rather than treating the supported voltages as interchangeable. Use short, wide supply paths with local decoupling placed close to the relevant device pins. Keep configuration and programming supply requirements separate from signal-interface decisions. Verify absolute maximum voltages, power-up sequencing and which supply rails must coexist during configuration in the manufacturer datasheet.
Do not treat every 176-terminal member of the ispMACH 4000 family as electrically identical. The speed grade changes timing performance, while generation and ordering suffixes can change temperature grade, qualification or lifecycle status. Before substituting a device, compare the complete ordering codes, timing tables, pin-description table and programming configuration. In particular, a slower -5 or -75 grade is not automatically acceptable for a path whose margin was calculated with the -3 grade.
अनुपालन जानकारी
Compliance declarations are not stated for the exact ordering code. Request current material and compliance documentation through the Request a Quote form when the product requirement includes RoHS, REACH or conflict-minerals screening.