LC4256V-5T144I SuperFAST CPLD 144-LQFP | Lattice
MPN: LC4256V-5T144I ✓ सक्रियLC4256V-5T144I अवलोकन
A CPLD, or complex programmable logic device, is a programmable-logic semiconductor used to implement glue logic, control functions, decoding, state machines, interface logic, and other fixed-function digital logic. In the broader hierarchy, the LC4256V-5T144I is a programmable logic device, a complex programmable logic device, and an in-system-programmable SuperFAST PLD. It is intended for applications where designers want reconfigurable logic with a relatively compact package and established Lattice programming workflows.
The device supports 3.3 V, 2.5 V, and 1.8 V operating supply options, as identified in the manufacturer-family documentation. The -5 designation identifies the speed grade, while the T144I ordering code identifies the 144-pin package and industrial-oriented ordering variant. The part is supplied in a 144-LQFP package, and its architecture is intended for designs requiring substantially more logic capability than small programmable-logic packages while retaining the advantages of a single-chip, non-volatile programmable implementation.
The ispMACH 4000 architecture provides a platform for high-density logic implementation with in-system programmability. This allows configuration or reprogramming in the target system rather than requiring the device to be removed for every logic change. That characteristic is useful during prototyping, production configuration, field updates, and designs in which the same board must support multiple logic revisions.
Typical application areas include industrial control equipment, communications equipment, test and measurement systems, instrumentation, embedded control, peripheral interface logic, and general-purpose digital system support. The 144-pin package provides a large number of package pins for power, grounds, configuration, programming, and user I/O, allowing complex interconnect requirements to be handled on a single device.
For PCB implementation, follow the pin assignment, power-supply, decoupling, programming-interface, and unused-pin guidance in the Lattice ispMACH 4000 family datasheet. Keep configuration and programming access routable, place bypass capacitors close to the supply pins, and verify signal-integrity requirements for all external clocks and high-speed interfaces before release.
This product page combines the LC4256V-5T144I family identity, package information, programming-focused application guidance, and engineering selection notes. It is intended to help engineers determine whether the 144-LQFP CPLD fits a specific logic-density, supply-voltage, package, and lifecycle requirement.
के लिए ड्रॉप-इन विकल्प LC4256V-5T144I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
LC4256V-5TN144I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256V-5TN144C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
LC4256V-5T144I Maximum Ratings और Electrical Characteristics
| Product Type | In-System Programmable SuperFAST High-Density PLD |
| Device Family | ispMACH 4000 |
| Programmable Logic Class | Complex Programmable Logic Device (CPLD) |
| Supported Supply Options | 3.3 V, 2.5 V, and 1.8 V |
| Speed Grade | -5 |
| पैकेज | 144-pin LQFP |
| पिन काउंट | 144 pins |
| Architecture | ispMACH 4000, blending ispLSI 2000 and ispMACH 4A features |
| Programmability | In-System Programmable |
| Operating Temperature Grade | Industrial grade indicated by I suffix |
| माउंटिंग प्रकार | Surface Mount |
LC4256V-5T144I 144-pin lqfp पिन कॉन्फ़िगरेशन गाइड
LC4256V-5T144I (144-pin lqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LC4256V-5T144I.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
LC4256V-5T144I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control Logic, Communications Interface Consolidation, Test and Measurement Instrumentation, Embedded System Glue Logic, Peripheral Interface and Bus Bridging, Programmable Fanout and System Control.
Industrial Control Logic
The LC4256V-5T144I is appropriate for industrial control boards that combine sequencing, state-machine, decoding, and peripheral-interface functions in one programmable device. Its 144-pin LQFP package provides a large pin count for user I/O, control signals, and supply connections, while in-system programmability supports configuration revision during prototype and production stages. The documented 3.3 V, 2.5 V, and 1.8 V supply options also allow the device to fit platforms using different logic levels. Engineers should verify temperature limits, I/O electrical characteristics, and timing against the Lattice ispMACH 4000 family documentation before approving a specific board configuration.
अनुशंसित
Communications Interface Consolidation
The LC4256V-5T144I can consolidate programmable protocol, framing, status, and data-path logic around a communications controller or processor. The large 144-pin package provides enough physical connections for multiple interfaces, control outputs, and dedicated programming signals, while the programmable architecture allows board logic to change without changing the PCB. Its -5 speed designation identifies the relevant speed grade for timing closure. Use the manufacturer timing and pin-assignment tables to establish external clock, clock-domain, and I/O timing margins, and confirm that the selected supply level matches every connected interface.
अनुशंसित
Test and Measurement Instrumentation
For test and measurement instruments, the LC4256V-5T144I is suited to programmable control, timing, trigger, status, and data-format logic surrounding an embedded processor or FPGA. In-system programmability allows one board design to support multiple instrument configurations or firmware-linked operating modes, while the 144-LQFP package exposes numerous user I/O signals. The 1.8 V, 2.5 V, and 3.3 V supply options support integration across multiple logic families. Designers should budget pin resources carefully and verify the device's I/O standards, clock-input requirements, and timing performance against the specific measurement architecture.
अनुशंसित
Embedded System Glue Logic
The LC4256V-5T144I is useful as a companion logic device beside a microcontroller when the design needs extensive decoding, bus arbitration, latch logic, or platform-specific sequencing. Its 144-pin package offers more I/O capacity than a small CPLD and can consolidate functions that would otherwise occupy multiple standard logic packages. Because the device is in-system programmable, the logic image can be adapted during board bring-up without a board respin in many cases. The Lattice ispMACH 4000 documentation should govern programming-pin routing, decoupling, and unused-pin treatment, while the system architect should confirm timing margins at the selected speed grade.
अनुशंसित
Peripheral Interface and Bus Bridging
The LC4256V-5T144I can implement programmable interface logic for legacy buses, status registers, address decoding, and protocol translation between embedded controllers and external hardware. The 144-pin LQFP format offers ample user I/O and dedicated configuration connectivity for designs requiring more routing options than a small programmable-logic package. Support for 3.3 V, 2.5 V, and 1.8 V supplies helps align the CPLD with mixed-voltage system sections. Before schematic release, verify every I/O's voltage tolerance, drive strength, slew behavior, and timing against the family datasheet and preserve the required configuration access for programming and diagnostics.
अनुशंसित
Programmable Fanout and System Control
The LC4256V-5T144I can serve as a centralized control CPLD for boards containing multiple external devices, power-sequencing signals, resets, interrupt routing, and programmable delay logic. Its in-system programmability makes it particularly useful when firmware and hardware revisions must be coordinated or when manufacturing variants share a common PCB. The 144-pin package gives the design additional routing flexibility for control and I/O assignments, and the documented supply options allow direct integration with common logic rails. Validate reset behavior, power-up states, I/O direction defaults, and timing for every controlled signal in the final design.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा LC4256V-5T144I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | LC4256V-5TN144I | LC4256V-5TN144C |
|---|---|---|---|
| Package | 144-LQFP | 144-LQFP | 144-LQFP |
| Brand | Lattice Semiconductor | Lattice Semiconductor | Lattice Semiconductor |
| Product Family | ispMACH 4000 | ispMACH 4000 | ispMACH 4000 |
| Device Type | In-System Programmable SuperFAST High-Density PLD | In-System Programmable SuperFAST High-Density PLD | In-System Programmable SuperFAST High-Density PLD |
| Speed Grade | -5 | -5 | -5 |
| Supply Options | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V | 3.3 V, 2.5 V, and 1.8 V |
| Temperature Grade | Industrial grade indicated by I suffix | Industrial grade indicated by I suffix | Commercial grade indicated by C suffix |
| Programmability | In-System Programmable | In-System Programmable | In-System Programmable |
मुख्य विशेषताएँ
- Industrial-ordering option in a high-pin-count package (बनामLC4256V-5TN144C)
- Directly related same-family ordering candidate (बनामLC4256V-5TN144I)
- Large package supports extensive board-level connections (बनामLC4256V-5TN144C)
डिज़ाइन नोट्स
Route the ispMACH 4000 programming interface so every required configuration pin remains accessible during schematic revision and production test. Place the device-side bypass capacitors close to the appropriate 3.3 V, 2.5 V, or 1.8 V supply pins using the exact connection and pin assignments from the Lattice family datasheet. Separate sensitive clock and configuration paths from high-current outputs, and use the package drawing to confirm pin-1 orientation before fabrication.
Use the family timing tables for setup, hold, clock, and I/O constraints rather than inferring timing from the -5 speed suffix alone. Apply the same edge-rate and loading assumptions to external clocks and high-speed user I/O, and add source-series termination where the selected interface requires it. Check worst-case hold timing with board skew and component tolerances, particularly when the CPLD interfaces directly with an FPGA or processor.
Do not approve a replacement based only on the 144-LQFP package. Confirm pinout, supply voltage, I/O standards, speed grade, temperature grade, configuration method, and lifecycle status for the complete ordering code. This is especially important when comparing LC4256V-5T144I with LC4256V-5TN144I or LC4256V-5TN144C, because the suffix changes the approved ordering conditions even when the mechanical footprint is identical.
अनुपालन जानकारी
The available product records identify the device and its ispMACH 4000 family attributes but do not state specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status. Confirm these attributes using the current Lattice product documentation and the exact ordering code.