Lattice Semiconductor

LFE2-70E-6F900I - 68K LUT ECP2 FPGA, 900-BBGA | Lattice

MPN: LFE2-70E-6F900I ✗ जीवन की समाप्ति
1.2 V Vdss 900-pin BGA (900-BBGA) Package -6 Speed
न्यूनतम ऑर्डर मात्रा: 1 |

LFE2-70E-6F900I अवलोकन

The Lattice Semiconductor Corporation LFE2-70E-6F900I is an ECP2 field-programmable gate array with 68,000 look-up tables, 583 user I/O, and 1.2 V operation in a 900-pin BGA package. It combines programmable logic, block RAM, DSP capability, and high-speed serial connectivity in a single device for communications, industrial control, video, and embedded systems. The -6 speed designation identifies its performance grade, while the industrial I suffix identifies the temperature grade.

An FPGA is a semiconductor whose digital logic, interconnect, and peripheral blocks are configured after manufacture. Lattice calls this device an ECP2 FPGA, placing it in the broader hierarchy of reconfigurable logic devices, programmable logic ICs, and general-purpose semiconductors. Unlike a fixed-function ASIC, the ECP2 allows parallel interface logic, protocol bridges, control paths, and signal-processing pipelines to be consolidated into one board-level component.

The LFE2-70E-6F900I provides approximately 68K LUTs and 583 I/O, giving designers substantial parallel logic capacity without requiring a large pin-count package in a separate companion device. The device also supports DSP-oriented signal processing and is identified in distributor listings as a 1.2 V ECP2 FPGA with a -6 industrial speed designation. A 900-BBGA footprint supports dense board escape routing, but its fine pitch demands careful PCB layout and assembly process control.

The ECP2 architecture is appropriate when design requirements are still evolving, because interface logic can be revised through bitstream programming rather than a silicon respin. The 583 available I/O positions are especially useful for parallel buses, sensor aggregation, counter inputs, industrial control interfaces, and video timing. The 68K-LUT scale also supports multi-channel data acquisition, protocol conversion, and control systems that would otherwise require several programmable devices.

Typical uses include industrial automation, test and measurement, networking equipment, video processing, sensor interfaces, and embedded communications gateways. The 900-BBGA package makes the device most suitable for high-density multilayer PCBs rather than hobbyist platforms or prototypes using through-hole construction. Signal integrity, power delivery, thermal performance, and BGA assembly yield should be considered together during layout planning.

For a new design, preserve the same footprint and preserve the device's supply-voltage and configuration requirements before treating another 900-BBGA ECP2 option as interchangeable. Confirm the exact speed grade, temperature grade, pin mapping, and bitstream support in the manufacturer datasheet. Use the device pin-description table when assigning PCB tracks, because a 900-pin package cannot be validated reliably from a generic package drawing alone.

This page combines distributor specifications, package details, pricing structure, drop-in candidates, comparison parameters, and practical design guidance. It also distinguishes confirmed same-footprint options from changes that require device-level verification, helping engineers shorten component-selection and hardware-review cycles.

के लिए ड्रॉप-इन विकल्प LFE2-70E-6F900I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LFE2-70E-6F900I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Speed Grade.

Lattice Semiconductor
Device Type: ECP2/M FPGA
Speed Grade: -5
इसके साथ तुलना करें LFE2-70E-6F900I →

LFE2-70E-6FN900I

✅ ड्रॉप-इन
📦 900-BBGA
Same ECP2 density of 68,000 LUTs, 583 I/O, 900-BBGA package, and -6 speed class; ordering suffix differs, so package finish and procurement conditions require confirmation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LFE2-70E-7F900I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 900-BBGA
Same LFE2-70E family and 900-BBGA footprint, but -7 speed grade instead of -6, giving different timing and power characteristics

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LFE2-70E-5F900I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
Lattice Semiconductor
📦 900-BBGA
ECP2/M FPGA · 68K LUTs · 583 I/O · 1,032 Kbit · 1.2 V · 90 nm · -5 · Industrial

कीमत के लिए संपर्क करें

LFE2-70SE-6F900I

✅ ड्रॉप-इन
📦 900-BBGA
Same 900-BBGA package and -6 speed suffix, but the 70SE device designation represents a different ECP2 device variant whose pin and resource compatibility must be confirmed

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LFE2-70E-8F900I

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 900-BBGA
Same LFE2-70E family and 900-BBGA footprint, but -8 speed grade instead of -6, changing timing performance and power consumption

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LFE2-70E-6F900I Maximum Ratings और Electrical Characteristics

Device Type ECP2 Field Programmable Gate Array (FPGA)
Logic Capacity 68,000 LUTs (68K LUTs)
User I/O Count 583 I/O
Core Supply Voltage 1.2 V
Speed Grade -6
Temperature Grade Industrial
पैकेज 900-pin BGA (900-BBGA)
Package Dimensions 31 x 31 mm
Block RAM 1,032 Kb
DSP Support Yes
ऑपरेटिंग तापमान रेंज -40 °C to +100 °C junction
Supply Voltage Range 1.14 V to 1.26 V
माउंटिंग प्रकार Surface Mount

LFE2-70E-6F900I 31 x 31 mm पिन कॉन्फ़िगरेशन गाइड

LFE2-70E-6F900I (31 x 31 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

LFE2-70E-6F900I के लिए 31 x 31 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LFE2-70E-6F900I.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LFE2-70E-6F900I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation and Machine Control, Video Capture and Image Processing, Test and Measurement Instrumentation, Communications and Protocol Bridging, Sensor Aggregation and Edge Processing, Embedded Audio and Data Processing.

🏭

Industrial Automation and Machine Control

The LFE2-70E-6F900I fits industrial controllers that must combine parallel machine I/O, timing logic, and programmable signal processing in one device. Its 68,000 LUTs provide substantial capacity for motion sequencing, interlocks, and communication protocols, while 583 user I/O positions support encoders, limit switches, solenoid drivers, and high-speed digital buses. The industrial suffix and -40 °C to +100 °C junction rating support controlled industrial environments. Use separate transceivers for electrically harsh field signals, and reserve the FPGA for deterministic logic rather than direct switching of high-energy loads.

📺

Video Capture and Image Processing

The LFE2-70E-6F900I is suitable for multi-channel video timing, pixel transport, and preprocessing systems because it provides 68,000 LUTs, 583 I/O, and DSP capability in one programmable device. Parallel interface logic can be implemented without relying on a fixed-function controller, and the FPGA can adapt to changing sensor or display timing. The 900-BBGA footprint supports dense routing on a multilayer board, although video designs demand careful length matching, separate power planes, and disciplined clocking. External memory and display-interface devices remain necessary when frame storage or panel driving exceeds the FPGA's internal resources.

🧪

Test and Measurement Instrumentation

The LFE2-70E-6F900I can implement the control, sequencing, and data-acquisition logic for automated test equipment. Its 68,000 LUTs support instrument command interpreters, timing generators, pattern engines, and analysis pipelines, while 583 I/O positions expose parallel data buses and trigger lines. The industrial temperature designation is useful in laboratory and production-test environments where temperature margins vary. Keep analog front ends outside the FPGA, use deterministic clocking for timing accuracy, and apply CDC analysis to asynchronous instrument interfaces before functional testing.

🌐

Communications and Protocol Bridging

The LFE2-70E-6F900I is appropriate for protocol conversion and aggregation nodes that must terminate several interfaces while maintaining deterministic packet or frame timing. Its 68,000 LUTs can host multiple bridge engines, and 583 I/O positions support parallel buses, clock-domain crossing, and control signals. The large BGA package also provides dense route escape for high-speed interfaces. Confirm the device's supported high-speed serial resources, pin assignments, and I/O standards in the manufacturer documentation, and use transceiver devices for electrical channels that exceed the FPGA's direct I/O capabilities.

🧩

Sensor Aggregation and Edge Processing

The LFE2-70E-6F900I fits edge-processing boards that combine several sensor inputs with local filtering or event classification. The 68,000 LUTs support parallel sampling, timestamp handling, and pre-processing pipelines, while DSP capability accelerates suitable multiply-accumulate operations. Its 583 I/O positions provide ample connections for sensors, ADC interfaces, and digital peripherals. Keep high-bandwidth sensor links on controlled impedance layers, isolate noisy analog inputs from the core supply network, and validate timing closure at the -6 speed grade before releasing a multi-layer board for assembly.

🎧

Embedded Audio and Data Processing

The LFE2-70E-6F900I can host parallel data pipelines, sample-rate conversion control, and digital filtering logic for embedded audio or general DSP subsystems. Its 68,000 LUTs and DSP resources allow filtering and buffering functions to be consolidated instead of split across separate programmable devices, while 583 I/O positions support codec buses and control signals. Use the ECP2 architecture's memory and DSP tables to map the selected pipeline and check timing at the industrial temperature limit. External low-noise converters and carefully isolated clocks are still needed for high-fidelity analog performance.

अनुशंसित उत्पादों का सारांश

MC1489NG4 Texas Instruments उपयोग में: Industrial Automation and Machine Control MC1488NE4 Texas Instruments उपयोग में: Industrial Automation and Machine Control ADV7280WBZ Video decoder for composite video input conditioning उपयोग में: Video Capture and Image Processing ADV7281WBZ Video decoder interface for multi-channel capture उपयोग में: Video Capture and Image Processing DS90CR213MTD Texas Instruments उपयोग में: Test and Measurement Instrumentation DS90C387VF LVDS data transmission for instrumentation interconnects उपयोग में: Test and Measurement Instrumentation, Communications and Protocol Bridging MC3403DR Texas Instruments उपयोग में: Communications and Protocol Bridging TUSB501DRFR Texas Instruments उपयोग में: Sensor Aggregation and Edge Processing TUSB542RWQR Texas Instruments उपयोग में: Sensor Aggregation and Edge Processing AK4490EN AKM (Asahi Kasei Microdevices) उपयोग में: Embedded Audio and Data Processing AK7752EN Audio codec for synchronized multichannel processing उपयोग में: Embedded Audio and Data Processing
What are the key specifications of LFE2-70E-6F900I?
The LFE2-70E-6F900I is a 1.2 V ECP2 FPGA providing 68,000 LUTs, 583 user I/O, and DSP capability in a 900-pin BGA package. Distributor and market listings also identify 1,032 Kb of block RAM and an industrial junction-temperature rating of -40 °C to +100 °C. These figures position it as a high-density, programmable logic device for parallel interfaces, industrial control, communications, and embedded signal processing.
Where can I download the LFE2-70E-6F900I datasheet PDF?
The LFE2-70E-6F900I datasheet is available through the manufacturer documentation links and the Octopart datasheet page listed on this page. Use the Lattice Semiconductor Corporation datasheet to confirm the 900-ball assignment, configuration pins, bank power requirements, supported I/O standards, and AC timing parameters. A third-party PDF mirror can also reproduce the document, but the manufacturer document should remain the controlling reference for design release.
Where is the LFE2-70E-6F900I pinout and 900-BBGA pin map?
The pin map is documented in the pin-description tables of the Lattice Semiconductor Corporation ECP2 device documentation for the 900-BBGA package. The 900-pin footprint is too large to reproduce reliably on this page, so use the manufacturer package drawings and device tables when assigning every ball, power bank, configuration signal, and user I/O. Confirm the exact package drawing revision against the ordering information for the LFE2-70E-6F900I.
What is the difference between LFE2-70E-6F900I and LFE2-70E-6FN900I?
Both listings identify the same 68,000-LUT ECP2 FPGA configuration with 583 I/O and a 900-BBGA package, and both carry the -6 speed designation. The distinguishing suffix N in the 6FN900I ordering code indicates a different ordering variant rather than a different logic density. Before substituting it, verify the manufacturer ordering table for package finish, temperature treatment, and procurement conditions rather than relying only on the shortened part numbers.
Can LFE2-70E-6FN900I replace LFE2-70E-6F900I as a drop-in part?
The LFE2-70E-6FN900I is a close same-brand candidate because listings match the 68,000-LUT density, 583 I/O, 900-BBGA package, and -6 speed grade. It can be treated as a drop-in candidate only after the manufacturer ordering information confirms identical pinout, electrical limits, temperature grade, configuration method, and supported programming flow. Package match and nominal density match alone do not guarantee production interchangeability.
When should I choose LFE2-70E-6F900I over another ECP2 FPGA?
Choose the LFE2-70E-6F900I when a design needs approximately 68K LUTs, up to 583 user I/O, integrated DSP capability, and a large 900-BBGA footprint in a single programmable device. It is most appropriate where evolving interfaces benefit from reconfigurable logic and a multi-layer PCB can support fine-pitch assembly. If only a small interface or control function is required, a smaller FPGA may simplify the design and reduce board complexity.
Is LFE2-70E-6F900I suitable for industrial control systems?
The LFE2-70E-6F900I is identified with an industrial temperature designation, with a junction rating of -40 °C to +100 °C. That rating supports industrial equipment designs when the board, power system, and enclosure maintain the required temperature margins. Confirm system-level requirements, including the manufacturer operating-temperature conditions and your own thermal analysis, before treating the device as suitable for every industrial environment.
What can replace the LFE2-70E-6F900I?
The closest confirmed same-brand candidate is the LFE2-70E-6FN900I, which shares the ECP2 family, 68,000-LUT density, 583 I/O, -6 speed designation, and 900-BBGA package in distributor listings. The LFE2-70E-7F900I is another same-family speed-grade candidate, but its timing class differs from the -6 device. Validate timing, thermal class, pin assignments, and bitstream compatibility in the manufacturer documentation before replacement.
Is the LFE2-70E-6F900I the same as the LFE2-70E-7F900I?
No, the LFE2-70E-7F900I is a higher -7 speed designation, while the LFE2-70E-6F900I is rated at speed grade -6. Their naming relationship indicates members of the same LFE2-70E family, but a faster grade is not automatically an exact functional replacement for a design that depends on -6 timing closure. Compare the manufacturer timing tables and power characteristics at the operating junction temperature before substitution.
What is the best Lattice equivalent for the LFE2-70E-6F900I?
The LFE2-70E-6FN900I is the closest Lattice candidate identified for a same-footprint migration because it retains the 68,000-LUT ECP2 configuration, 583 I/O, 900-BBGA package, and -6 performance class. The LFE2-70E-7F900I is an alternative same-family speed option when faster timing performance is acceptable. No cross-brand 900-BBGA pin-compatible equivalent is established by the available cross-reference results.
How many DSP blocks does the LFE2-70E-6F900I have?
The LFE2-70E-6F900I includes DSP capability, as stated in its distributor and market listings, but the verified listings do not state a numerical DSP-block count. Use the ECP2 device table for the 68K-LUT density to determine the exact multiplier count, resource organization, and supported DSP operating modes. Do not infer the count solely from the LUT total, because DSP resources are organized by architecture.
How much block RAM does the LFE2-70E-6F900I provide?
The LFE2-70E-6F900I provides 1,032 Kb of block RAM according to the LFE2-70E-6F900I market listing. For a design, map that capacity against the memory blocks, organization, and optional modes supported by the ECP2 architecture. The ECP2 family also offers programmable memory features, so verify how much capacity is available for general-purpose data storage versus dual-port or parity-assisted operation.
How much current does the LFE2-70E-6F900I consume?
The LFE2-70E-6F900I operates from a 1.2 V core, with listings reporting a supply range of 1.14 V to 1.26 V, but the verified information does not include a quiescent or active current table. Actual consumption depends on speed grade, configuration, I/O activity, memory use, and junction temperature. Use the manufacturer power-estimation tables and your design utilization report to size regulators and power planes.
Where can I buy the LFE2-70E-6F900I?
The LFE2-70E-6F900I can be requested through the Request a Quote form on this page, which supports current pricing, stock, minimum order quantity, and lead-time inquiries. Because the part is listed as obsolete in a market listing, availability may be limited and lifecycle status should be reconfirmed during sourcing. A lifecycle-appropriate alternative may be preferable for new production designs.
What is the price of the LFE2-70E-6F900I?
Current unit pricing, volume tiers, and stock for the LFE2-70E-6F900I are available through the Request a Quote form on this page. No fixed price is published here because component values and availability can change, particularly for an obsolete programmable device. Include your required quantity, target date, and acceptable package or packing condition when requesting the quotation.
Is the LFE2-70E-6F900I in stock and what is its lead time?
Current inventory and lead time for the LFE2-70E-6F900I should be requested through the Request a Quote form on this page. The part is identified as obsolete and hard to find in a market listing, so stock may be limited, constrained, or available only through special procurement channels. Provide your schedule and annual usage to allow the supply team to identify the most practical sourcing route.

के लिए इंजीनियरिंग संदर्भ डेटा LFE2-70E-6F900I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LFE2-70E-6F900I when an existing ECP2 design specifically targets the -6 speed grade, 68K-LUT density, 583 I/O, and 900-BBGA footprint, and when maintaining that exact design has priority over lifecycle risk. The LFE2-70E-6FN900I is the closest confirmed catalog match, but its ordering conditions still require review. Use the LFE2-70E-7F900I when a faster same-family grade can pass timing and power analysis without board changes. Consider the LFE2-70E-5F900I only when lower-speed timing is acceptable and the replacement's power characteristics meet the system requirement. Treat the LFE2-70SE-6F900I as a lower-confidence migration because its device designation differs. For a new production program, verify lifecycle status and consider a currently supported Lattice FPGA rather than adopting an obsolete ECP2 without supply assurance.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LFE2-70E-6FN900I LFE2-70E-7F900I LFE2-70E-5F900I LFE2-70SE-6F900I LFE2-70E-8F900I
Brand Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation Lattice Semiconductor Corporation
Package 900-BBGA 900-BBGA 900-BBGA 900-BBGA 900-BBGA 900-BBGA
Speed Grade -6 -6 -7 -5 -6 -8

मुख्य विशेषताएँ

  • Closest confirmed ordering variant retains the same core resource listing (बनामLFE2-70E-6FN900I)
  • Higher-speed same-family option is available without changing the package (बनामLFE2-70E-7F900I)
  • Large programmable resource count supports consolidated control logic (बनामLFE2-70SE-6F900I)

डिज़ाइन नोट्स

The 900-BBGA footprint requires a multilayer PCB with short, impedance-controlled escape routes from the fine-pitch ball array. Follow the manufacturer reference land pattern and ball map rather than generating a generic BGA footprint. Keep high-speed clock and differential pairs on matched layers, avoid routing over split power planes, and place decoupling structures close to the corresponding device power balls. Independent review of the escape-routing layer is valuable because an error near the package center can require a complete layout change.

The core operates at 1.2 V, with the market listing reporting a 1.14 V to 1.26 V supply range. Build the rail architecture around the manufacturer's recommended voltage and current limits for the -6 speed grade, including separate sequencing for core, configuration, and I/O supplies where required. Use multiple power and ground balls as directed by the pin-description table, and verify steady-state plus transient margins with the actual utilization report because active current is design-dependent.

Do not treat a matching 900-BBGA package as proof that every LFE2-70E ordering code is a production drop-in replacement. The -5, -6, -7, and -8 speed grades can change timing closure and power consumption, while the 70SE designation can indicate a different device variant. Confirm logic resources, user I/O availability, pin mapping, configuration method, temperature class, and programming-tool support in the manufacturer documentation before releasing substitute parts for production.

The industrial junction range is -40 °C to +100 °C, but a large BGA does not automatically guarantee low thermal resistance. Estimate junction temperature from the selected speed grade, device utilization, I/O switching activity, ambient temperature, copper area, and board construction. Avoid relying on the package alone for heat dissipation; provide thermal vias and copper spreading where the manufacturer layout guidance permits, and check worst-case activity during system qualification.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The industrial temperature designation identifies the device grade but does not establish RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals compliance. AEC-Q100 is not applicable to this general-purpose industrial FPGA.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LFE2-70E-6F900I datasheet LFE2-70E-6F900I datasheet pdf LFE2-70E-6F900I specifications LFE2-70E-6F900I pinout LFE2-70E-6F900I 900 BBGA Lattice LFE2-70E-6F900I LFE2-70E-6F900I equivalent LFE2-70E-6F900I replacement LFE2-70E-6F900I cross reference LFE2-70E-6F900I vs LFE2-70E-6FN900I LFE2-70E-6F900I price LFE2-70E-6F900I stock LFE2-70E-6F900I buy 68K LUT 583 I/O FPGA ECP2 FPGA industrial control

संबंधित कंपोनेंट्स और शब्द

Lattice Semiconductor Corporation LFE2-70E-6F900I LFE2-70E-6FN900I LFE2-70E-7F900I LFE2-70E-5F900I LFE2-70SE-6F900I LFE2-70E-8F900I ECP2 field-programmable gate array FPGA reconfigurable logic device look-up table LUT block RAM DSP user I/O 900-BBGA BGA package surface-mount package 1.2 V core supply industrial temperature grade speed grade -6 programmable logic bitstream configuration industrial automation
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें