NXP Semiconductors

LPC11U14FHI33/201 - 50MHz 32-Bit USB MCU | NXP

MPN: LPC11U14FHI33/201 ✓ सक्रिय
1.8 V to 3.6 V Vdss 32-pin HVQFN (7 x 7 mm) Package 50 MHz Speed 32 KB (32K x 8) Memory
न्यूनतम ऑर्डर मात्रा: 1 |

LPC11U14FHI33/201 अवलोकन

NXP Semiconductors LPC11U14FHI33/201 is a 32-bit Arm Cortex-M0 microcontroller operating up to 50 MHz, with 32 KB of flash memory, 6 KB of SRAM, and USB device capability. The device is offered in a 32-pin HVQFN package measuring 7 x 7 mm, making it suitable for compact embedded systems where low cost, low power, and USB connectivity are important. Its operating voltage range is 1.8 V to 3.6 V.

A microcontroller is a programmable semiconductor integrating a processor core, memory, and peripherals on one integrated circuit. The LPC11Uxx family is positioned between simple 8-bit controllers and more complex 32-bit application processors. It provides 32-bit processing, efficient code density, and low-power operation in packages designed for cost-sensitive consumer, industrial, metering, and connected peripheral products.

The LPC11U14FHI33/201 includes 32 KB of flash for firmware and 6 KB of SRAM for working memory. Its Cortex-M0 core operates at frequencies up to 50 MHz and supports a compact instruction set that helps reduce code size. USB device functionality adds a standardized interface for configuration, data transfer, and control without requiring a separate USB interface controller. The 1.8 V to 3.6 V operating range supports low-voltage embedded systems and connected accessories.

The LPC11Uxx architecture targets applications formerly handled by 8-bit and 16-bit microcontrollers while preserving a straightforward development model. Its integrated memory and USB support reduce external component count, and the 7 x 7 mm HVQFN package supports space-constrained board layouts. Firmware development uses the LPC1100 series device support, with Arm Keil device information and CMSIS support identified for the LPC11U family.

Typical applications include USB-connected metering equipment, compact data-acquisition modules, configuration and programming tools, industrial interface controllers, consumer accessories, and low-power embedded nodes. The USB interface can simplify firmware update or data exchange, while the Cortex-M0 core provides enough performance for protocol handling, local control, and supervisory logic without requiring a higher-complexity processor.

PCB design requires careful treatment of the HVQFN exposed pad, decoupling, USB routing, and ground-return paths. Place bulk and high-frequency decoupling capacitors close to their associated supply pins, connect the exposed thermal pad to a low-impedance ground plane, and follow the manufacturer land-pattern and USB-layout guidance in the datasheet. Validate signal integrity, power sequencing, and thermal performance before production release.

This page combines the LPC11U14FHI33/201 specification summary, sourcing workflow, verified lifecycle status, drop-in replacement assessment, package considerations, and application-oriented design guidance for engineers evaluating this NXP USB microcontroller.

के लिए ड्रॉप-इन विकल्प LPC11U14FHI33/201 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

LPC11U14FHI33

✅ ड्रॉप-इन
📦 32-HVQFN (7x7)
Same 50 MHz Cortex-M0 core, 32 KB flash, 6 KB SRAM, and USB configuration; the base ordering designation omits the /201 order suffix, with 0% difference in the listed core specifications

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

LPC11U14FHI33/201 Maximum Ratings और Electrical Characteristics

Product Type 32-bit ARM Cortex-M0 microcontroller IC
CPU Core Arm Cortex-M0
Maximum CPU Frequency 50 MHz
Flash Memory 32 KB (32K x 8)
SRAM 6 KB
Operating Voltage Range 1.8 V to 3.6 V
Architecture 32-bit
इंटरफ़ेस USB device
पैकेज 32-pin HVQFN (7 x 7 mm)
Package Pin Count 32 pins
Exposed Pad Present
माउंटिंग प्रकार Surface mount
Series LPC11Uxx
RoHS स्थिति Compliant
Order Code /201
लाइफसाइकिल स्थिति Active

LPC11U14FHI33/201 32 pins पिन कॉन्फ़िगरेशन गाइड

LPC11U14FHI33/201 (32 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

LPC11U14FHI33/201 के लिए 32 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LPC11U14FHI33/201.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LPC11U14FHI33/201 के लिए उपयुक्त है 6 अनुप्रयोगs: USB Metering Equipment, USB Configuration and Programming Tool, Industrial Interface Controller, Compact Data-Acquisition Module, USB-Accessible Consumer Accessory, Low-Power Sensor Node.

⚡

USB Metering Equipment

The LPC11U14FHI33/201 fits USB-connected metering equipment that needs protocol handling, local measurement supervision, and configuration storage in a compact controller. Its Arm Cortex-M0 core operates up to 50 MHz, providing capacity for communication tasks and control logic, while 32 KB of flash stores firmware and 6 KB of SRAM supports working buffers. The USB device interface simplifies host connectivity, and the 7 x 7 mm HVQFN package preserves board space in compact utility or portable instruments. Designers should budget SRAM for protocol stacks and USB buffers, place decoupling close to the supply pins, and validate bus-routing and power behavior during prototype testing.

🔧

USB Configuration and Programming Tool

The LPC11U14FHI33/201 is well suited to a compact configuration or programming tool because it combines USB device connectivity with an Arm Cortex-M0 processor operating up to 50 MHz. The controller can implement enumeration, command processing, device control, and firmware update logic while using 32 KB of flash for application code and 6 KB of SRAM for active data. Its 32-pin HVQFN package allows a small enclosure, and the 1.8 V to 3.6 V operating range supports low-voltage portable designs. Firmware engineers should reserve memory for USB descriptors and buffers, follow the recommended USB trace geometry, and test enumeration across the intended host-device combinations.

🏭

Industrial Interface Controller

The LPC11U14FHI33/201 can serve as the local controller in a compact industrial interface module that bridges USB to embedded sensors, actuators, or field-bus circuitry. Its 50 MHz Cortex-M0 core provides deterministic instruction throughput for protocol handling, while 32 KB of flash and 6 KB of SRAM support moderate control logic and communication buffering. The 1.8 V to 3.6 V operating range integrates well with low-voltage industrial subsystems, and the 7 x 7 mm HVQFN footprint allows the controller to fit beside signal-conditioning components. Use the pin-description table for exact peripheral assignments and validate isolation, grounding, transient protection, and USB signal integrity at system level.

📟

Compact Data-Acquisition Module

The LPC11U14FHI33/201 supports compact USB data-acquisition modules where a 32-bit controller must coordinate sampling control, buffering, configuration, and host communication. Its Arm Cortex-M0 core runs up to 50 MHz, providing useful headroom for interrupt-driven acquisition and protocol tasks, while 32 KB of flash accommodates embedded firmware and 6 KB of SRAM handles short working windows. The MCU's USB device interface removes the need for a separate host interface in many designs, and its 7 x 7 mm HVQFN package limits board footprint. Engineers should size FIFO and processing memory carefully, avoid exceeding SRAM limits, and account for analog front-end timing when scheduling acquisition tasks.

📱

USB-Accessible Consumer Accessory

The LPC11U14FHI33/201 fits compact consumer accessories that require device control, status reporting, configuration storage, and firmware maintenance over USB. The 50 MHz Cortex-M0 core can manage user-interface state and low-speed control protocols, while 32 KB of flash stores application code and 6 KB of SRAM supports working data. Its 32-pin HVQFN package enables a small controller footprint, and the 1.8 V to 3.6 V supply range can align with low-voltage accessory electronics. Product developers should include ESD protection for exposed USB connectors, verify current limits on the selected host configuration, and use the exposed-pad land pattern for reliable thermal and electrical performance.

🧩

Low-Power Sensor Node

The LPC11U14FHI33/201 can act as the processing hub in a USB-connected sensor node that gathers local information and forwards it to a host system. The Cortex-M0 core operating up to 50 MHz provides enough performance for sensor scheduling, data conditioning, and communication, while 32 KB of flash and 6 KB of SRAM suit compact embedded workloads. The low-voltage 1.8 V to 3.6 V operating range allows integration with low-energy sensor circuitry, and the HVQFN package reduces board area in miniature assemblies. Designers should use the manufacturer power-management guidance, keep sensitive analog and USB routing separated, and verify wake, suspend, and bus-powered current behavior in the final enclosure and accessory configuration.

What is the LPC11U14FHI33/201?
The LPC11U14FHI33/201 is an active NXP Semiconductors 32-bit Arm Cortex-M0 microcontroller rated up to 50 MHz, with 32 KB of flash, 6 KB of SRAM, and USB device connectivity. According to the NXP LPC11U14FHI33 product page, it belongs to the LPC11Uxx family and uses a 32-pin HVQFN package measuring 7 x 7 mm. It is intended for compact, low-power embedded systems that benefit from 32-bit processing and USB without requiring a larger application processor.
What is the operating voltage of LPC11U14FHI33/201?
The LPC11U14FHI33/201 operates from 1.8 V to 3.6 V. This range allows the microcontroller to fit low-voltage USB and embedded-control designs where a 3.3 V rail is common but rail-to-rail tolerance is required. The operating voltage is listed on the NXP product page and in the component listing summary. Confirm device-specific absolute maximum ratings, USB operating conditions, and power-sequencing requirements against the manufacturer datasheet before final circuit design.
How much flash and SRAM does LPC11U14FHI33/201 have?
The LPC11U14FHI33/201 provides 32 KB of flash memory and 6 KB of SRAM. NXP describes the flash as 32K x 8, while the family documentation identifies 6 KB of SRAM. These resources are suitable for protocol handling, local control, configuration storage, and compact USB-facing firmware. Firmware size, stack depth, USB buffers, and application data must be evaluated during development to ensure the available SRAM remains sufficient.
Where can I download the LPC11U14FHI33/201 datasheet?
The official LPC11U14FHI33/201 datasheet and product resources are available through the NXP LPC11U14FHI33 product page at https://www.nxp.com/part/LPC11U14FHI33. The manufacturer page is the preferred source for the electrical characteristics, memory map, USB interface information, package drawing, pin description, and recommended application circuit. Use the LPC11Uxx family documentation for shared peripheral behavior and the device-specific ordering information for the /201 suffix.
Where can I find the LPC11U14FHI33/201 pinout?
The LPC11U14FHI33/201 pin assignment is identified in the manufacturer LPC11Uxx datasheet and HVQFN package drawing. The device uses a 32-pin HVQFN package with an exposed pad, so the exposed thermal pad must be included when planning the footprint and ground connection. Do not infer pin functions from another HVQFN device. Cross-check every supply, ground, reset, programming, and USB signal against the pin-description table before routing the PCB.
Is LPC11U14FHI33/201 suitable for USB embedded devices?
The LPC11U14FHI33/201 is suitable for USB embedded devices because it combines an Arm Cortex-M0 core running up to 50 MHz with an integrated USB device interface. It can handle peripheral control, data acquisition, protocol management, and configuration tasks while maintaining a compact 7 x 7 mm HVQFN footprint. The 1.8 V to 3.6 V supply range supports low-voltage designs. USB bus-routing, decoupling, impedance, and firmware-class requirements should be validated during prototype development.
What is the difference between LPC11U14FHI33 and LPC11U14FHI33/201?
The LPC11U14FHI33 is the base NXP ordering designation, while LPC11U14FHI33/201 identifies the specific orderable configuration. The manufacturer product page associates LPC11U14FHI33 with 32 KB flash, 6 KB SRAM, the HVQFN32 package, and active status. The /201 code further identifies the ordering variant rather than introducing a different processor architecture. Check the manufacturer ordering table for its exact packing, temperature, and qualification interpretation before treating the base designation as a procurement substitute.
When should I choose LPC11U14FHI33/201 over another Cortex-M0 MCU?
Choose the LPC11U14FHI33/201 when the design specifically benefits from 32 KB of flash, 6 KB of SRAM, USB device connectivity, a maximum 50 MHz operating frequency, and a compact 32-pin HVQFN footprint. It is especially relevant to low-cost metering, configuration, programming, and industrial-interface products. A different MCU should be selected when the design needs more RAM, a larger pin count, advanced analog functions, or a different low-power architecture that better matches the product requirements.
What is the best drop-in replacement for LPC11U14FHI33/201?
The LPC11U14FHI33 is the closest manufacturer-documented drop-in candidate for the LPC11U14FHI33/201 because it is the base ordering designation for the same 32-pin HVQFN device family and retains the 50 MHz Cortex-M0, 32 KB flash, and 6 KB SRAM configuration. Its exact order code, temperature grade, and packing must be checked against the manufacturer ordering table. The LPC1114FHI33 is not treated as a drop-in alternative because its USB feature set and device configuration differ.
Can another manufacturer replace LPC11U14FHI33/201 without PCB changes?
A cross-brand MCU should not be treated as a confirmed drop-in replacement without a manufacturer pin-by-pin comparison. The LPC11U14FHI33/201 combines a 32-pin HVQFN footprint with USB, 32 KB flash, 6 KB SRAM, and Arm Cortex-M0 software requirements, and no verified cross-brand part was established with matching pinout and peripheral behavior. Use the Request a Quote form on this page for sourcing support, and require schematic, firmware, USB, timing, and lifecycle review before approving a cross-brand substitution.
What can replace LPC11U14FHI33/201 in an existing design?
The LPC11U14FHI33 base part is the only manufacturer-related replacement candidate established for the LPC11U14FHI33/201. It uses the same 32-pin HVQFN package and retains the listed 50 MHz Cortex-M0 core, 32 KB flash, 6 KB SRAM, and USB device function. Before substitution, compare the complete ordering code, temperature range, USB implementation, peripheral mapping, startup behavior, and package drawing. Firmware should also be regression-tested against the exact replacement configuration.
Is LPC11U14FHI33/201 the same as LPC11U14FHI33?
The LPC11U14FHI33/201 is an orderable designation within the LPC11U14FHI33 family listing, but the two strings should not be assumed to be identical procurement codes. NXP associates the base part with the 32-pin HVQFN device and its documented configuration, while /201 further specifies an ordering option. Use the manufacturer ordering information to determine packing and grade details. The LPC11U14FHI33 is therefore the closest documented alternative, subject to complete order-code verification.
Where can I buy LPC11U14FHI33/201 online?
Use the Request a Quote form on this page to request LPC11U14FHI33/201 pricing, stock confirmation, and lead time for the exact /201 ordering designation. The manufacturer lists the device as active, but quantity, packaging, and regional availability can change independently of lifecycle status. When requesting a quotation, specify the required quantity, acceptable packing method, target delivery date, and whether a manufacturer-authorized channel is required for traceability.
What is the price of LPC11U14FHI33/201?
Current commercial pricing for LPC11U14FHI33/201 is presented through the Request a Quote form on this page rather than as a static price statement. The quote request should use the exact LPC11U14FHI33/201 ordering code to avoid confusion with the base LPC11U14FHI33 designation. Include quantity breaks, target packaging, and delivery requirements in the request so the returned commercial offer reflects the intended production quantity and procurement terms.
What is the lead time and stock status of LPC11U14FHI33/201?
NXP lists the LPC11U14FHI33 device family as active, but the stock position and production lead time for the exact /201 order code are not represented as a guaranteed quantity on this page. Use the Request a Quote form to request current availability, minimum order quantity, scheduled delivery, and any pack-size constraints. For new production programs, obtain a lifecycle and supply commitment before schematic release, especially when the product depends on a specific orderable configuration.
What are the key specifications of LPC11U14FHI33/201 that engineers should know?
The key LPC11U14FHI33/201 specifications are a 50 MHz Arm Cortex-M0 core, 32-bit processing, 32 KB flash, 6 KB SRAM, USB device connectivity, a 1.8 V to 3.6 V operating range, and a 32-pin 7 x 7 mm HVQFN package. The device also has an exposed pad that must be connected according to the recommended land pattern. These values define the MCU's performance, memory, interface, and board-area envelope while supporting cost-sensitive embedded designs.

के लिए इंजीनियरिंग संदर्भ डेटा LPC11U14FHI33/201 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose LPC11U14FHI33/201 for compact embedded products that require USB device connectivity, an Arm Cortex-M0 core operating up to 50 MHz, 32 KB of flash, and 6 KB of SRAM in a 7 x 7 mm HVQFN package. It is particularly suitable for metering accessories, configuration tools, data-acquisition modules, industrial interfaces, and connected sensor nodes. The LPC11U14FHI33 base designation is the closest drop-in candidate because its listed core specifications and package match, but verify the ordering code, packing, and temperature requirements before substitution. The LPC1114FHI33 should not be selected as a drop-in without a detailed USB and pin-level comparison. If a design requires more SRAM, different USB speeds, more I/O, or a different power-management architecture, select another MCU rather than forcing a software or board redesign around this device.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद LPC11U14FHI33
Brand NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (7x7) 32-HVQFN (7x7)
CPU Core Arm Cortex-M0 Arm Cortex-M0
Maximum CPU Frequency 50 MHz 50 MHz
Flash Memory 32 KB (32K x 8) 32 KB
SRAM 6 KB 6 KB
USB Interface USB device USB device
Order Designation LPC11U14FHI33/201 Base ordering designation without /201
Lifecycle Status Active Active

मुख्य विशेषताएँ

  • USB connectivity in a compact 32-bit MCU (बनामLPC1114FHI33)
  • 50 MHz Cortex-M0 performance with 6 KB SRAM (बनामLPC11U14FHI33)
  • Space-efficient 7 x 7 mm HVQFN implementation (बनामLPC11U14FHI33)

डिज़ाइन नोट्स

Use the manufacturer HVQFN32 land pattern and make the exposed pad an electrical and thermal connection to the ground plane. Place the input and internal decoupling capacitors close to their corresponding supply pins, with each return path connected directly into the ground reference. Avoid routing USB, clock, and sensitive analog signals beneath or across noisy power paths. Confirm pad, solder-mask, paste, and copper dimensions against the latest NXP package drawing before releasing artwork.

Treat USB D+ and D- as a controlled-impedance differential pair. Use symmetric routing, a continuous reference plane, minimal stubs, and the geometry recommended by the manufacturer and applicable USB implementation guidance. Keep the connector-to-controller path free of test pads that create unnecessary discontinuities when not required. Provide appropriate ESD protection close to an externally accessible connector and verify rise time, impedance, enumeration, and radiated-emissions performance on physical prototypes rather than relying only on schematic review.

Do not substitute the LPC11U14FHI33 base designation for LPC11U14FHI33/201 until the complete ordering code, temperature grade, packing method, and qualification status have been matched. Likewise, do not treat the similarly named LPC1114FHI33 as a drop-in part because USB capability and device configuration may differ even if the package is also 32-HVQFN. Review the datasheet pin table, errata list, USB clock requirements, startup behavior, and exposed-pad connection before authorizing a board change or firmware transfer.

Design the 1.8 V to 3.6 V power rails so they remain inside the limits for every operating mode, including USB attachment, bus-powered operation, and brownout transitions. Use the manufacturer's recommended capacitor values and ESR or stability considerations for the internal regulators and USB interface. Check startup current and source impedance, provide local bulk energy where the load changes abruptly, and validate both steady-state and transient voltage with an oscilloscope. Adjust protection only after confirming that the device's absolute maximum and functional limits remain satisfied.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The component is identified as RoHS compliant. No explicit REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declarations were identified for the exact order code.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

LPC11U14FHI33/201 datasheet LPC11U14FHI33 datasheet LPC11U14FHI33/201 pinout LPC11U14FHI33 HVQFN32 LPC11U14FHI33/201 USB microcontroller LPC11U14FHI33/201 50MHz Cortex-M0 LPC11U14FHI33 32KB flash 6KB SRAM NXP LPC11U14FHI33 LPC11U14FHI33/201 replacement LPC11U14FHI33 vs LPC11U14FHI33/201 LPC11U14FHI33/201 price LPC11U14FHI33/201 stock

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors LPC11U14FHI33/201 LPC11U14FHI33 LPC11Uxx Arm Cortex-M0 microcontroller 32-bit microcontroller USB device controller embedded processor semiconductor flash memory SRAM firmware CMSIS Arm Keil HVQFN32 QFN package family surface-mount package USB metering equipment industrial interface controller data-acquisition module low-power sensor node programmable embedded system 50 MHz
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें