NXP Semiconductors

LPC2148FBD64 - 60MHz ARM7 MCU with USB | NXP

MPN: LPC2148FBD64 ✗ जीवन की समाप्ति
64-LQFP, 10 mm x 10 mm Package 60 MHz Speed 512 kB Memory
न्यूनतम ऑर्डर मात्रा: 1 |

LPC2148FBD64 अवलोकन

The NXP Semiconductors LPC2148FBD64 is a 16-bit/32-bit ARM7TDMI-S microcontroller with a 60 MHz maximum clock, 512 kB of embedded flash, USB 2.0 full-speed device support, and 10-bit ADC and DAC peripherals in a 64-LQFP package measuring 10 mm by 10 mm. The part combines an ARM processor core, high-speed embedded memory, and mixed-signal connectivity in one device.

An ARM7TDMI-S microcontroller is a single-chip embedded processing device designed to execute 16-bit or 32-bit instructions while integrating memory and peripherals. Within the product hierarchy, the LPC2148 belongs to the LPC2100 family of ARM7-based microcontrollers, combining real-time emulation, embedded trace support, and a 128-bit memory interface. It is intended for industrial control, communications, data acquisition, and USB-connected embedded systems.

Key features include 512 kB of embedded flash, up to 40 kB of SRAM, a 60 MHz operating frequency, USB 2.0 full-speed device operation, and 10-bit ADC and DAC channels. The integrated converter resources reduce the need for external signal-conditioning and data-conversion components when the system must acquire analog inputs and generate analog outputs. The 64-LQFP package also provides enough perimeter pins for external memories, communications interfaces, and general-purpose I/O.

The ARM7TDMI-S architecture supports efficient 32-bit execution while maintaining compatibility with 16-bit ARM code. Its 128-bit-wide memory interface is designed to support code execution at the maximum clock rate, and the embedded flash permits firmware, boot code, and application logic to reside directly on the microcontroller. For new hardware, software should be developed against the current NXP LPC2148 device support and peripheral libraries rather than assuming compatibility with unrelated ARM7 microcontrollers.

Typical applications include industrial control panels, USB data loggers, instrumentation front ends, serial gateways, and embedded measurement systems. The USB interface is particularly useful for a compact peripheral that must exchange configuration or logged data with a host computer, while the ADC and DAC support direct analog monitoring and low-speed signal generation. Firmware and external circuitry still need appropriate protection for industrial noise and ground-potential differences.

PCB layout should preserve short, continuous return paths for USB, analog grounds, and power connections. Place decoupling capacitors close to the supply pins, keep analog and digital return currents separated where possible, and follow the package and application guidance in the manufacturer datasheet. The LCD, Ethernet, and USB interfaces also require careful signal-integrity treatment if those optional functions are used.

This product page combines the manufacturer specifications, package information, sourcing context, interface considerations, and honest replacement guidance for LPC2148FBD64. It also distinguishes verified pin-compatible options from related devices that require different firmware, package changes, or board redesign.

के लिए ड्रॉप-इन विकल्प LPC2148FBD64 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं LPC2148FBD64 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Maximum CPU Clock, Product Type, SRAM.

Microchip Technology
Package: 64-LQFP (10x10 mm)
Maximum CPU Clock: 55 MHz
SRAM: 32 KB
इसके साथ तुलना करें LPC2148FBD64 →
NXP Semiconductors
Product Type: 16/32-bit ARM7 microcontroller
इसके साथ तुलना करें LPC2148FBD64 →

इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।

विकल्प अनुरोध करें

LPC2148FBD64 Maximum Ratings और Electrical Characteristics

Product Type 16-bit/32-bit ARM7TDMI-S microcontroller
Maximum CPU Clock 60 MHz
Embedded Flash 512 kB
Flash Organization 512K x 8 bit
SRAM 40 kB
ADC Resolution 10 bit
DAC Resolution 10 bit
USB Interface USB 2.0 full-speed device
Programming and Boot Support ISP and IAP
CPU Architecture ARM7TDMI-S with real-time emulation and embedded trace support
Memory Interface 128-bit wide
पैकेज 64-LQFP, 10 mm x 10 mm
पिन काउंट 64 pins
माउंटिंग प्रकार Surface mount

LPC2148FBD64 64-lqfp, 10 mm x 10 mm पिन कॉन्फ़िगरेशन गाइड

LPC2148FBD64 (64-lqfp, 10 mm x 10 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

LPC2148FBD64 के लिए 64-lqfp, 10 mm x 10 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: LPC2148FBD64.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

LPC2148FBD64 के लिए उपयुक्त है 6 अनुप्रयोगs: USB Connected Data Logger, Industrial Measurement Controller, USB Communication Gateway, Precision Test and Measurement Front End, Serial Protocol Controller, Embedded Control Panel.

🖥️

USB Connected Data Logger

The LPC2148FBD64 fits a USB-connected logger that must acquire measurements, retain them locally, and transfer them to a host computer. Its 512 kB flash provides room for firmware, configuration structures, event markers, and logging code, while up to 40 kB SRAM supports buffers and working variables. The USB 2.0 full-speed device interface simplifies host communication without requiring an external protocol converter. A practical design uses the 10-bit ADC for suitable sensor signals, the DAC for low-speed test or control outputs, and ISP or IAP for field firmware maintenance. USB routing and grounding require careful layout to avoid data-integrity problems.

🏭

Industrial Measurement Controller

The LPC2148FBD64 can serve as the central controller in an industrial measurement system that combines analog monitoring, local logic, and serial communications. Its 60 MHz ARM7TDMI-S core supports deterministic control tasks, while 512 kB of flash can hold application code, calibration data, and communication protocols. The 10-bit ADC is suitable for sensors with appropriate signal conditioning, and the 10-bit DAC provides an analog output for setpoints or test stimuli. Galvanic isolation, surge protection, filtering, and grounding must be added where the equipment operates near industrial motors or long external cables.

🌐

USB Communication Gateway

The LPC2148FBD64 is appropriate for a compact gateway that translates between USB and embedded serial or control interfaces. The 60 MHz processor can manage protocol processing and application logic, and the 512 kB flash is useful for firmware, protocol tables, configuration storage, and diagnostic data. USB 2.0 full-speed operation provides a standardized host connection, while the remaining digital interfaces can connect local sensors, actuators, or legacy equipment. Designers should budget memory for protocol stacks, avoid long unprotected cable runs, and verify timing against the required host and peripheral data rates.

🔧

Precision Test and Measurement Front End

The LPC2148FBD64 can form the digital front end of a compact test instrument when the required conversion resolution and bandwidth are within the capabilities of the integrated converters. The 60 MHz ARM7 core handles acquisition sequencing, scaling, calibration, and result transfer, while 512 kB flash accommodates firmware and test definitions. The 10-bit ADC and 10-bit DAC reduce the component count for low-speed or moderate-bandwidth signal generation and measurement. For precision systems, specify suitable references, low-noise analog paths, input protection, and calibration procedures rather than relying on converter resolution alone.

⚡

Serial Protocol Controller

The LPC2148FBD64 can control equipment built around multiple serial interfaces because its 60 MHz ARM7TDMI-S core provides more processing capacity than typical small-format controllers. Its 512 kB flash and up to 40 kB SRAM allow protocol stacks, packet buffers, diagnostics, and application logic to coexist. The MCU can translate between local serial devices and a USB host while maintaining timing and managing configuration data. The final design should verify baud-rate tolerance, interrupt latency, DMA requirements, and peripheral availability against the exact protocol set, since not every peripheral arrangement is identical across related LPC devices.

📺

Embedded Control Panel

The LPC2148FBD64 can implement a local operator panel that reads controls, displays status, records events, and communicates with supervisory equipment. Its 512 kB flash supports interface code, menu logic, diagnostics, and update handling, while the 10-bit ADC can monitor simple analog controls after conditioning. The USB device capability allows a laptop or service tool to configure the panel or retrieve logs. A robust implementation needs ESD protection for user-accessible inputs, careful separation of display and communication returns, and firmware recovery procedures that make use of ISP or IAP.

What is the operating frequency of the LPC2148FBD64?
The LPC2148FBD64 operates at up to 60 MHz using an ARM7TDMI-S processor core. According to the NXP LPC2141/42/44/46/48 datasheet, its 128-bit memory interface and accelerator architecture support 32-bit code execution at the maximum clock rate. This makes the device suitable for control loops, communication protocols, and USB data-processing tasks that require substantially more performance than an 8-bit microcontroller.
How much flash and SRAM does the LPC2148FBD64 contain?
The LPC2148FBD64 contains 512 kB of embedded flash and up to 40 kB of SRAM. The manufacturer datasheet identifies the flash organization as 512K x 8 bit and describes a 128-bit-wide memory interface. The on-chip flash supports firmware, application code, boot routines, ISP, and IAP operations, while the SRAM accommodates stack, variables, buffers, and real-time working data.
Does the LPC2148FBD64 include USB and analog converters?
Yes, the LPC2148FBD64 includes a USB 2.0 full-speed device interface, a 10-bit ADC, and a 10-bit DAC. According to the NXP manufacturer datasheet, these resources support direct USB connectivity and integrated analog measurement or generation. Analog input conditioning, output buffering, reference design, and electrical protection must still be designed around the actual application.
What package does the LPC2148FBD64 use?
The LPC2148FBD64 uses a 64-pin LQFP package measuring 10 mm by 10 mm. Distributor product information identifies it as a 64-LQFP surface-mount microcontroller, and the NXP datasheet provides the complete package drawing and pin description. Use the manufacturer pin table and land pattern when assigning tracks and checking unused pins.
Where can I download the LPC2148FBD64 datasheet PDF?
The official LPC2148FBD64 datasheet PDF is available from NXP at https://www.nxp.com/docs/en/data-sheet/LPC2141_42_44_46_48.pdf. The document covers the LPC2141, LPC2142, LPC2144, LPC2146, and LPC2148 family, so select the LPC2148-specific columns, tables, and pin descriptions. The NXP product page also links to supporting device documentation and programming resources.
Where is the LPC2148FBD64 pinout located?
The LPC2148FBD64 pinout is located in the pin configuration and package-information section of the NXP LPC2141/42/44/46/48 datasheet. Use that table to verify every signal, supply pin, ground pin, and no-connect position before laying out the PCB. The package is 64-LQFP, so its physical pin numbering must not be confused with the numbered sections in the functional description.
Can an LPC2148FBD64 replace another LPC2148FBD64 ordering suffix?
An ordering suffix can change the delivery package, temperature grade, or another commercial attribute even when the base LPC2148FBD64 device is unchanged. Confirm the full suffix, reel or tray format, temperature range, and marking before treating another listing as interchangeable. The Request a Quote form on this page can be used to confirm whether the exact ordering code is available for the intended assembly process.
What is the best drop-in replacement for the LPC2148FBD64?
No alternative has been confirmed as a universal drop-in replacement for the LPC2148FBD64 without changing its firmware or board design. A true replacement must match the 64-LQFP footprint, pin functions, power requirements, memory organization, peripherals, and ARM7 software environment. Many modern microcontrollers use different Cortex-M architectures and peripheral registers, so they are migration choices rather than direct drop-in parts.
Is there a cross-brand equivalent for the LPC2148FBD64?
No cross-brand drop-in equivalent has been established for the LPC2148FBD64. The device combines an ARM7TDMI-S core, 512 kB flash, 40 kB SRAM, USB device support, analog converters, and a 64-LQFP footprint, making software and peripheral compatibility central to replacement decisions. Submit the required functions through the Request a Quote form if an engineered migration assessment is needed.
LPC2148FBD64 vs LPC2146FBD64: which one should I choose?
Choose the LPC2148FBD64 when the design requires its 512 kB flash, while the LPC2146FBD64 provides less program memory in the related LPC2100 family. The larger LPC2148 memory budget is useful for protocol stacks, USB firmware, logging, and complex control logic. The LPC2146 should be selected only after checking its memory, peripheral, and package requirements against the specific design.
When should I retain the LPC2148FBD64 instead of migrating to a newer MCU?
Retain the LPC2148FBD64 when an existing design depends on its ARM7 firmware, peripheral configuration, USB behavior, 512 kB flash, or established PCB layout and a redesign would add unnecessary risk. Migrate to a newer MCU when long-term sourcing, toolchain modernization, security updates, or expanded processing requirements outweigh the cost of porting software and qualifying a new board.
Is the LPC2148FBD64 suitable for industrial control systems?
The LPC2148FBD64 is suitable for many embedded control and measurement systems because it combines a 60 MHz ARM7TDMI-S core, 512 kB flash, 40 kB SRAM, USB device support, and 10-bit ADC and DAC functions. Industrial suitability also depends on the exact temperature grade, operating voltage, EMC requirements, isolation, protection, and qualification needs of the finished equipment.
What are the key specifications of the LPC2148FBD64 that engineers should know?
The key LPC2148FBD64 specifications are a 60 MHz ARM7TDMI-S core, 512 kB embedded flash, up to 40 kB SRAM, USB 2.0 full-speed device operation, 10-bit ADC and DAC resolution, ISP and IAP support, and a 64-LQFP package measuring 10 mm by 10 mm. The NXP datasheet also describes real-time emulation, embedded trace support, and a 128-bit-wide memory interface.
Is the LPC2148FBD64 currently recommended for new designs?
The LPC2148FBD64 is not recommended for new designs according to NXP community guidance, although the manufacturer continues to provide product and family documentation. Existing production equipment can often continue using the device after supply and change-control review. New products should compare current NXP families or other supported MCU platforms against required software, peripheral, and lifecycle needs.
Where can I buy the LPC2148FBD64 and check its lead time?
Use the Request a Quote form on this page to request LPC2148FBD64 availability, current lead time, minimum order quantity, and the required ordering suffix. Stock status and lead time can vary with package configuration, quantity, and manufacturing demand, so they should be confirmed for the exact part rather than assumed. The same form can clarify production quantities and traceable delivery conditions.

के लिए इंजीनियरिंग संदर्भ डेटा LPC2148FBD64 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the LPC2148FBD64 when maintaining an established ARM7-based design that depends on 512 kB flash, up to 40 kB SRAM, USB device operation, and integrated 10-bit analog converters. Its 60 MHz ARM7TDMI-S core also provides more headroom than basic 8-bit controllers for protocol processing and real-time control. For new products, first confirm that a supported MCU platform is more appropriate, because NXP does not recommend the LPC2148 for new designs. A related LPC2146, LPC2144, or LPC2142 should be considered only when its memory capacity and peripherals satisfy the application and its software characteristics have been checked. Modern Cortex-M microcontrollers may offer better long-term toolchain support, but they generally require firmware porting and often a PCB redesign, so they should be treated as migrations rather than drop-in replacements.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद
Brand NXP Semiconductors
Package 64-LQFP, 10 mm x 10 mm
CPU Core ARM7TDMI-S
Maximum Clock 60 MHz
Embedded Flash 512 kB
SRAM 40 kB
USB Interface USB 2.0 full-speed device
ADC and DAC 10-bit ADC and 10-bit DAC
Programming Support ISP and IAP
Product Lifecycle Not recommended for new designs

मुख्य विशेषताएँ

  • Substantial embedded memory for a single-chip controller (बनामLPC2148FBD64)
  • Integrated USB and mixed-signal resources (बनामLPC2148FBD64)
  • Established ARM7TDMI-S software target (बनामLPC2148FBD64)

डिज़ाइन नोट्स

Use the NXP package drawing and pin table to create the 64-LQFP land pattern. Place all required decoupling capacitors beside their associated supply pins with short ground returns, and route high-current outputs away from sensitive analog inputs. Keep the USB D+ and D- trace geometry controlled and provide the external components specified for the selected USB operating mode.

Separate analog and digital return paths as far as practical, particularly around the ADC and DAC. Use a quiet analog ground region beneath analog components, connect analog and digital grounds according to the complete board strategy, and add filtering close to the pins. The integrated converters have 10-bit resolution, but layout noise, reference variation, and unsuitable signal conditioning can still dominate measurement accuracy.

Do not treat a related LPC214x device or a modern Cortex-M MCU as a direct replacement merely because it has a similar package. Migration can change startup behavior, clock controls, interrupt vectors, peripheral registers, memory sizes, and USB implementation. Validate firmware, boot code, ISP or IAP procedures, and mixed-signal performance on the target hardware before production release.

Confirm the device-specific supply limits and external decoupling requirements from the NXP datasheet before choosing capacitors or designing power sequencing. Use a supply capable of meeting the controller's peak input requirement and account for USB connection-state current where applicable. Do not infer operating voltage from the CPU frequency or package rating.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals status was established for this exact ordering code. Confirm environmental and product qualification requirements with the manufacturer before production release.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

lpc2148fbd64 datasheet nxp lpc2148fbd64 LPC2148FBD64 datasheet pdf LPC2148FBD64 pinout LPC2148FBD64 64-LQFP pinout LPC2148FBD64 60MHz specifications LPC2148FBD64 512KB flash LPC2148FBD64 USB microcontroller LPC2148FBD64 equivalent LPC2148FBD64 replacement LPC2148FBD64 cross reference LPC2148FBD64 application circuit LPC2148FBD64 price LPC2148FBD64 stock NXP LPC2148FBD64 microcontroller

संबंधित कंपोनेंट्स और शब्द

NXP Semiconductors LPC2148FBD64 LPC2100 ARM7TDMI-S ARM7 16-bit/32-bit microcontroller embedded microcontroller semiconductor 512 kB flash 40 kB SRAM 60 MHz USB 2.0 full-speed device 10-bit ADC 10-bit DAC ISP IAP 64-LQFP LQFP package family surface mount SMD industrial control data acquisition USB data logging real-time emulation embedded trace
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें