Microchip Technology

M2GL005-1TQG144 - 6K IGLOO2 FPGA | Microchip Technology

MPN: M2GL005-1TQG144 ✓ सक्रिय
1.2 V Vdss 144-pin TQFP, 20 x 20 mm Package 128 Kbit Memory
न्यूनतम ऑर्डर मात्रा: 1 |

M2GL005-1TQG144 अवलोकन

The Microchip Technology M2GL005-1TQG144 is an IGLOO2 low-density field-programmable gate array with 6,060 logic cells, 719,872 RAM bits, and 84 I/O pins in a 144-pin TQFP package. It operates from a 1.2 V core supply and is intended for compact embedded systems requiring configurable logic, serial interfaces, control functions, and modest parallel processing. The package is a surface-mount 20 x 20 mm TQFP, allowing the device to be used where BGAs would increase assembly complexity.

An FPGA is a programmable semiconductor whose logic fabric and interconnect can be configured after manufacture. Within the product hierarchy, the M2GL005-1TQG144 belongs to the IGLOO2 family of low-density FPGAs, combining programmable logic blocks, embedded SRAM, programmable I/O, and clock-management resources in one device. This makes it suitable for consolidating control logic that would otherwise require multiple CPLDs, discrete logic ICs, and application-specific controllers.

The device provides 6,060 logic cells and 719,872 RAM bits, providing meaningful capacity for protocol bridging, parallel-to-serial conversion, data acquisition front ends, and embedded control. Its 84 I/O pins give the design substantial connectivity for buses, status signals, clocks, and external interfaces. The 1.2 V operating voltage suits modern low-energy embedded systems, while the 144-pin TQFP package supports conventional surface-mount assembly and inspection.

The IGLOO2 architecture combines programmable fabric with dedicated resources for embedded memory, clocking, and I/O. Engineers can implement multiple control paths, interface engines, or data-processing blocks in one FPGA, reducing component count and interconnections on a compact board. Because the M2GL005 is a low-density member, it also avoids the larger pin counts, higher board complexity, and greater routing demands associated with high-density programmable logic.

Typical applications include industrial automation, sensor acquisition, motor and motion control, communications gateways, medical monitoring equipment, and compact embedded control platforms. The 84 available I/O pins are particularly useful for parallel sensors and legacy peripherals, while the embedded RAM can buffer data or support protocol state machines. The device can also consolidate multiple fixed-function logic sections into a single programmable implementation.

PCB design should preserve the manufacturer's recommended power, decoupling, and clock-routing practices. Place supply capacitors close to the appropriate device pins, route high-speed clock signals with short, controlled-impedance paths, and use the pin-description tables in the packaging guide when assigning every TQFP signal. Confirm the selected configuration’s I/O standards against the actual board voltage domains before programming the device.

This page combines the verified device identity, package information, pin-resource counts, lifecycle status, application guidance, and same-package replacement analysis. It also helps engineers distinguish speed, temperature, and package-ordering variants before making a PCB-compatible substitution, while preserving the distinction between a true drop-in replacement and a merely similar FPGA.

के लिए ड्रॉप-इन विकल्प M2GL005-1TQG144 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं M2GL005-1TQG144 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Logic Elements, Device Type, Programmable Logic Type.

Microchip Technology
Package: 144-pin TQFP
Logic Elements: 6,060 LE
Device Type: IGLOO2 low-density FPGA
इसके साथ तुलना करें M2GL005-1TQG144 →
Microchip Technology
Package: 144-pin LQFP/TQFP
Logic Elements: 6,060 cells
Device Type: IGLOO2 low-density flash FPGA
इसके साथ तुलना करें M2GL005-1TQG144 →
Microchip Technology
Package: 144-pin TQFP
Logic Elements: 6,060 cells (6K LEs)
Device Type: IGLOO2 low-density flash FPGA
इसके साथ तुलना करें M2GL005-1TQG144 →

M2GL005-1TQ144

✅ ड्रॉप-इन
Microchip Technology
📦 144-pin TQFP (LQFP)
IGLOO2 low-density FPGA · 6,060 LE · 719,872 bits · 1.2 V · 84 pins · 144-pin TQFP · 20 mm x 20 mm · Surface mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

M2GL005-TQG144

✅ ड्रॉप-इन
Microchip Technology
📦 144-pin TQFP (LQFP)
IGLOO2 low-density flash FPGA · 6,060 cells (6K LEs) · 1.2 V · 703 Kbit · 64 KB · None · 144-pin TQFP · 20 x 20 mm

कीमत के लिए संपर्क करें

डेटाशीट देखें →

M2GL005-1TQG144I

✅ ड्रॉप-इन
📦 144-pin TQFP (LQFP)
The I suffix adds an industrial temperature designation, changing the temperature-grade ordering by one category while preserving the -1 speed grade, 6,060 logic cells, and 144-pin package.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

M2GL005-TQG144I

✅ ड्रॉप-इन
📦 144-pin TQFP (LQFP)
The I suffix adds the industrial temperature designation, while omission of -1 changes the speed-grade ordering by one designation; both use the 6,060-cell IGLOO2 device and 144-pin package.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

M2GL005-TQ144

✅ ड्रॉप-इन
Microchip Technology
📦 144-pin TQFP (LQFP)
IGLOO2 low-density flash FPGA · 6,060 cells · 1.2 V · 703 Kbit · 128 Kbit · 144-pin LQFP/TQFP · 20 mm x 20 mm · 0.5 mm

कीमत के लिए संपर्क करें

डेटाशीट देखें →

M2GL005-1TQG144 Maximum Ratings और Electrical Characteristics

Product Type IGLOO2 low-density field-programmable gate array (FPGA)
FPGA Family IGLOO2
Logic Cells 6,060 cells
Total RAM 719,872 bits
User I/O Count 84 pins
Core Operating Voltage 1.2 V
पैकेज 144-pin TQFP, 20 x 20 mm
माउंटिंग प्रकार Surface mount
Programmable Logic Type SRAM-based FPGA
Fabric RAM 703 Kbit
Embedded SRAM 64 KB
User Programmable Flash 128 Kbit
लाइफसाइकिल स्थिति In production

M2GL005-1TQG144 144-pin tqfp, 20 x 20 mm पिन कॉन्फ़िगरेशन गाइड

M2GL005-1TQG144 (144-pin tqfp, 20 x 20 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

M2GL005-1TQG144 के लिए 144-pin tqfp, 20 x 20 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: M2GL005-1TQG144.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

M2GL005-1TQG144 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controllers, Sensor Acquisition and Signal Conditioning, Communications Protocol Bridging, Medical Monitoring Equipment, Motor and Motion Control, Networked Edge and IoT Gateways.

🏭

Industrial Automation Controllers

The M2GL005-1TQG144 fits industrial automation controllers that coordinate sensors, actuators, status indicators, and communications between a controller and field equipment. Its 6,060 logic cells can host multiple state machines, while 719,872 RAM bits provide local data buffering without requiring a separate memory device. The 84 user I/O pins allow parallel sensor inputs and actuator outputs to be consolidated around one programmable component. At a 1.2 V core voltage, the device fits modern industrial control architectures that separate low-voltage digital processing from field-side interfaces. Select the appropriate temperature suffix for the enclosure, then verify every I/O voltage domain against the field hardware.

🧩

Sensor Acquisition and Signal Conditioning

The M2GL005-1TQG144 can implement sensor acquisition, filtering, calibration, and data-routing functions when a microcontroller lacks enough I/O or parallel processing capacity. Its 84 user I/O pins support multiple digital sensors, switches, and external data buses, while the 719,872 RAM bits accommodate sample buffers and intermediate processing. The 6,060 logic cells allow parallel converters, digital filters, and timing control to operate concurrently rather than sequentially in a microcontroller. Use the device for digital conditioning after analog front-end conversion, and confirm sampling-clock jitter and I/O timing against the selected speed grade during implementation.

🌐

Communications Protocol Bridging

The M2GL005-1TQG144 is suitable for protocol conversion between legacy parallel peripherals and serial communication links. Its 6,060 logic cells can support transmit and receive state machines, framing logic, CRC generation, and command translation, while embedded RAM provides FIFO and packet buffering. With 84 I/O pins, the FPGA can retain connections to multiple legacy buses while driving a serial transceiver through a small number of pins. This consolidation is useful in communications gateways, data concentrators, and embedded test equipment. Validate protocol timing, clock-domain relationships, I/O standards, and signal-integrity margins using the final implementation constraints.

💊

Medical Monitoring Equipment

The M2GL005-1TQG144 can support digital monitoring, control, and interface functions in compact medical equipment where programmable logic provides flexibility across multiple sensor channels. The 84 I/O pins accommodate digital inputs, alarm outputs, display-control signals, and external device interfaces, while the embedded RAM supports trace and status buffering. Its 6,060 logic cells are sufficient for timing controls, digital filtering, data formatting, and communication preprocessing without requiring a large FPGA. For medical applications, confirm the exact operating-temperature grade, applicable product-quality expectations, electrical limits, and risk-control requirements before production release.

🔧

Motor and Motion Control

The M2GL005-1TQG144 is well suited to programmable motion-control front ends that coordinate encoders, limit sensors, pulse outputs, and protection signals. Its 84 I/O pins provide connections for multiple digital position inputs and control outputs, while 6,060 logic cells can execute dedicated motion algorithms concurrently. The 719,872 RAM bits can hold position histories or intermediate calculations, reducing pressure on an external controller. Place the FPGA close to the encoder and power-conversion interfaces, maintain short timing-critical routes, and verify all outputs against the motor-drive electrical requirements. The device should not directly replace protected power semiconductors.

🧩

Networked Edge and IoT Gateways

The M2GL005-1TQG144 can serve as the programmable edge of an IoT gateway, performing local protocol conversion, data filtering, status aggregation, and control before information is sent over a network interface. Its 84 I/O pins support peripheral connections and multiple digital interfaces, while the embedded RAM can buffer bursts from sensors or host processors. The 1.2 V operating core and low-density 6,060-cell architecture make it appropriate for compact embedded products that need configurable logic without a high-density FPGA. Select the proper temperature grade for the enclosure and validate timing, power integrity, and communication margins under worst-case traffic.

अनुशंसित उत्पादों का सारांश

M2GL005-1TQG144I Industrial-temperature ordering option with the same 144-pin footprint उपयोग में: Industrial Automation Controllers, Sensor Acquisition and Signal Conditioning, Medical Monitoring Equipment, Networked Edge and IoT Gateways M2GL005-1TQ144 Microchip Technology उपयोग में: Industrial Automation Controllers, Medical Monitoring Equipment, Networked Edge and IoT Gateways M2GL005-TQG144 Microchip Technology उपयोग में: Sensor Acquisition and Signal Conditioning M2GL005-TQ144 Microchip Technology उपयोग में: Communications Protocol Bridging, Motor and Motion Control M2GL005-TQG144I Industrial-temperature option for communications equipment उपयोग में: Communications Protocol Bridging, Motor and Motion Control
What are the key specifications of M2GL005-1TQG144 that engineers should know?
The M2GL005-1TQG144 provides 6,060 logic cells, 719,872 RAM bits, and 84 user I/O pins in a 1.2 V IGLOO2 architecture. According to the Microchip M2GL005 product page and family documentation, the device is in production and targets low-density embedded applications requiring programmable logic, embedded memory, and flexible I/O. It uses a surface-mount 144-pin TQFP measuring 20 x 20 mm. Its combination of 6K logic cells and 84 I/O pins makes it substantially more capable than a small CPLD while retaining a less complex package and assembly process than many higher-density FPGA options.
What is the M2GL005-1TQG144 used for?
The M2GL005-1TQG144 is used for compact programmable control, interface bridging, protocol conversion, data buffering, and embedded signal processing. Its 6,060 logic cells and 719,872 RAM bits can support multiple state machines and parallel data paths, while 84 I/O pins provide connections to sensors, memory, transceivers, and legacy parallel buses. According to the Microchip M2GL005 product page, IGLOO2 devices are positioned for low-density systems where a small FPGA can replace several discrete logic devices. It is especially useful when the design needs programmable functionality but does not justify the board and assembly complexity of a large BGA FPGA.
Where can I download the M2GL005-1TQG144 datasheet PDF?
The official M2GL005-1TQG144 datasheet can be accessed through the Microchip M2GL005 product page at https://www.microchip.com/en-us/product/M2GL005. The manufacturer product page provides the device data sheet and related low-density-device resources. For mechanical dimensions and individual package signals, engineers should also consult the Microchip document titled “PDF IGLOO 2 FPGA Packaging and Pin Descriptions User Guide,” available from the manufacturer domain. Use the package pin-description table when assigning power, ground, configuration, clock, and user I/O functions.
Where is the M2GL005-1TQG144 pinout located?
The M2GL005-1TQG144 pinout is documented in the Microchip “PDF IGLOO 2 FPGA Packaging and Pin Descriptions User Guide,” available at https://ww1.microchip.com/downloads/aemDocuments/documents/FPGA/ProductDocuments/SoC/m2gl_ds0124_pin_info_v6.pdf. The target device uses a 144-pin TQFP package with 84 user I/O pins. Use the guide’s package-specific pin table and bank information when defining the schematic symbols and PCB land pattern. The exposed package drawing also provides the mechanical body size and lead dimensions needed for land-pattern and assembly calculations.
Is M2GL005-1TQG144 the same as M2GL005-TQG144?
The M2GL005-1TQG144 and M2GL005-TQG144 use the same 144-pin TQFP family and 6,060-cell IGLOO2 device, but the order codes carry different speed-grade designations. The “-1” version requests the speed grade identified by the manufacturer’s M2GL005 ordering information, while the version without “-1” selects a different grade. Before replacing one with the other, compare the required timing margin in the FPGA design tool. A device with an acceptable timing margin can preserve the PCB footprint, but timing and power results must be recompiled and checked.
What is the best drop-in replacement for M2GL005-1TQG144?
The M2GL005-1TQG144I is the closest same-package drop-in candidate because it retains the “-1” grade, IGLOO2 architecture, 6,060 logic cells, 719,872 RAM bits, 84 I/O pins, and 144-pin TQFP package while adding the industrial temperature designation. The exact temperature ranges and timing values should be checked against the design requirements. When used as a replacement, recompile the project, confirm I/O voltage compatibility, and review the updated timing report. Only a device with an acceptable timing margin and matching electrical requirements should be treated as a drop-in replacement.
Can M2GL005-TQG144 replace M2GL005-1TQG144?
M2GL005-TQG144 can preserve the physical PCB footprint because both devices use the 144-pin TQFP package, but it does not carry the same “-1” speed-grade designation. Consequently, it should not be treated as an unconditional drop-in replacement without timing analysis. According to the manufacturer ordering information, the suffix identifies the selected speed grade, and timing performance must remain acceptable across all implemented clock domains. Recompile the design, review static timing results, and confirm temperature and I/O requirements before approving the substitution.
When should I choose M2GL005-1TQG144 over M2GL005-1TQ144?
Choose the M2GL005-1TQG144 when its exact package, temperature, and ordering configuration satisfies the production requirements and the design needs the same “-1” grade as the original qualified component. The M2GL005-1TQ144 offers the same 6,060-cell IGLOO2 configuration and 144-pin footprint, but its order-code suffix differs. The practical distinction should be resolved through the manufacturer’s device comparison and the project’s production specification. For either choice, verify the selected temperature grade, timing closure, package drawing, and availability schedule before releasing a production BOM.
Is M2GL005-1TQG144 suitable for industrial control and automation systems?
The M2GL005-1TQG144 is suitable for many industrial control tasks because it combines 6,060 logic cells, 719,872 RAM bits, and 84 user I/O pins with a low 1.2 V core supply. These resources support sensor multiplexing, data acquisition, communications, and real-time control functions. The exact MPN carries a “-1” speed designation, while an “I” suffix identifies the industrial-temperature option in the related ordering nomenclature. If the enclosure exposes the device to an extended temperature range, compare the exact suffix requirements carefully and choose the variant whose specified operating range covers the design environment.
How much power and thermal design is required for M2GL005-1TQG144?
The M2GL005-1TQG144 power consumption depends on the selected I/O standards, clocking, resource utilization, and activity factor, so a single fixed power value cannot be assigned without the design configuration. The device operates from a 1.2 V core supply and includes 84 configurable I/O pins. According to the Microchip family documentation, core and I/O supplies have distinct distribution and decoupling requirements. Use the manufacturer power-estimation tool for the actual design, then verify worst-case temperature behavior through the device operating guidelines. Provide local supply capacitance and adequate board copper for the power rails.
What programming and tool compatibility does M2GL005-1TQG144 require?
The M2GL005-1TQG144 is programmed as a member of the Microchip IGLOO2 low-density FPGA family, so the design flow must support the correct device identifier, package, speed grade, and 1.2 V configuration. The manufacturer’s FPGA development tools provide device selection, HDL synthesis, place-and-route, timing analysis, programming, and configuration-file generation. A replacement should not be programmed with the original device’s configuration file without first recompiling and verifying that the new part has a matching configuration architecture. Confirm the installed tool version supports the exact ordering suffix and 144-pin package.
Is M2GL005-1TQG144 RoHS compliant?
The RoHS status should be confirmed for the exact M2GL005-1TQG144 order code through the Microchip product documentation or material-compliance declaration. The related M2GL005-TQG144I listing is identified as RoHS compliant, but that statement should not automatically be transferred to every suffix and speed-grade combination. For production procurement, request the manufacturer’s current material-compliance record for the exact MPN and require the documentation to match the device being assembled. The same review should cover REACH, halogen-free, and conflict-minerals requirements when they apply to the finished product.
Where can I buy M2GL005-1TQG144 and check its price?
Use the “Request a Quote” form on this page to request the current price, stock position, minimum order quantity, and lead time for the M2GL005-1TQG144. The form allows buyers to specify the exact 6,060-cell IGLOO2 device, 144-pin TQFP package, “-1” speed designation, and required delivery quantity. Because FPGA availability can change by lot and schedule, request a written quotation tied to the manufacturer part number. Do not substitute an electrically different IGLOO2 density or package without an engineering review and PCB compatibility check.
What is the lead time for M2GL005-1TQG144?
The current production lead time for the M2GL005-1TQG144 should be requested through the “Request a Quote” form on this page. Lead time can depend on the exact suffix, package shipment method, quantity, and the manufacturer’s factory schedule, so a generic schedule would not be reliable. Include the required delivery date and annual usage with the inquiry. For new designs, request an initial quotation and manufacturing schedule before freezing the design; for scheduled builds, share the forecast so the supply plan can be matched to the procurement requirement.
Is M2GL005-1TQG144 currently in stock?
Current inventory for the M2GL005-1TQG144 should be confirmed through the “Request a Quote” form on this page. The manufacturer product page identifies the M2GL005 family as in production, but production status does not by itself guarantee immediate availability of every ordering suffix or shipping quantity. State the required package form, date code requirements, and forecast quantity in the request. Buyers should also request a factory lead time so the procurement decision reflects both available supply and the scheduled replenishment interval.
What is the best Lattice equivalent for M2GL005-1TQG144?
The MachXO2-7000 is identified as a comparable Lattice low-density FPGA, but it should not be called a guaranteed drop-in replacement for the M2GL005-1TQG144 without a complete pin, voltage, configuration, and timing comparison. The two device families use different programmable architectures and programming flows even when their logic capacities appear similar. According to the Microchip cross-reference information, the MachXO2-7000 provides similar functionality, not proof of pin-for-pin electrical equivalence. A board redesign or requalification is likely, so use the alternative only after reviewing the manufacturer’s device data and completing a full interface migration.

के लिए इंजीनियरिंग संदर्भ डेटा M2GL005-1TQG144 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Select the M2GL005-1TQG144 when the design requires the Microchip IGLOO2 architecture with 6,060 logic cells, 719,872 RAM bits, 84 user I/O pins, a 1.2 V core, and a 144-pin TQFP footprint. The -1 ordering suffix makes it particularly relevant when the production specification requires that speed grade. Choose M2GL005-1TQG144I when the product needs the related industrial-temperature designation while retaining the same speed and package. M2GL005-1TQ144 is a useful same-package comparison when the G suffix is not required. M2GL005-TQG144 and M2GL005-TQ144 omit the -1 designation and should be selected only after recompiling the design and confirming that timing closure remains acceptable. For every option, verify the exact I/O voltage standards, temperature range, production marking, and manufacturer ordering documentation before releasing the BOM.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद M2GL005-1TQ144 M2GL005-TQG144 M2GL005-1TQG144I M2GL005-TQG144I M2GL005-TQ144
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 144-pin TQFP (LQFP) 144-pin TQFP (LQFP) 144-pin TQFP (LQFP) 144-pin TQFP (LQFP) 144-pin TQFP (LQFP) 144-pin TQFP (LQFP)
FPGA Family IGLOO2 IGLOO2 IGLOO2 IGLOO2 IGLOO2 IGLOO2
Logic Cells 6,060 cells 6,060 cells 6,060 cells 6,060 cells 6,060 cells 6,060 cells
Total RAM Bits 719,872 bits 719,872 bits 719,872 bits 719,872 bits 719,872 bits 719,872 bits
User I/O Count 84 pins 84 pins 84 pins 84 pins 84 pins 84 pins
Core Operating Voltage 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V 1.2 V
Speed Designation -1 speed grade -1 speed grade Standard speed designation -1 speed grade Standard speed designation Standard speed designation
Industrial Temperature Designation Not designated by an I suffix Not designated by an I suffix Not designated by an I suffix Industrial temperature designation Industrial temperature designation Not designated by an I suffix

मुख्य विशेषताएँ

  • Maintains the complete 144-pin package and 84-I/O interface while offering a closely related ordering option (बनामM2GL005-TQG144)
  • Offers an industrial-temperature ordering path without changing the PCB land pattern (बनामM2GL005-TQG144)
  • Retains the -1 speed designation and 6,060-cell IGLOO2 architecture in the same package family (बनामM2GL005-TQ144)

डिज़ाइन नोट्स

Use the 144-pin TQFP mechanical drawing and pin-description guide to create the schematic symbol and PCB footprint. Preserve the manufacturer’s pin sequence, exposed ground requirements, and recommended pad geometry rather than generating the footprint solely from the nominal 20 x 20 mm body size. Review all bank voltage assignments before assigning pins because the 84 user I/O pins may be grouped into voltage domains with different allowable standards. Have the land pattern and assembly drawing cross-checked against the exact package variant in the production BOM.

Treat the 1.2 V core and I/O supplies as separate distribution paths, even though both are associated with the same FPGA. Place the required bypass and bulk capacitors adjacent to the corresponding power and ground pins, following the decoupling values and placement rules in the Microchip power-supply guidance. Estimate dynamic core and I/O current separately for the selected clocking, resource use, and I/O standards. Verify the power source’s steady-state and transient capability before layout closure, since programmable logic activity can create fast current changes even though the nominal core voltage is only 1.2 V.

Route configuration, clock, and high-speed user signals with short paths, continuous reference planes, and no unnecessary stubs. Apply the device’s documented clock-input requirements and constrain input and output timing in the FPGA project. If the design crosses clock domains, use the appropriate synchronizer structure and verify the maximum clock-frequency relationship accepted by the tools. For external buses, analyze setup and hold margins at the selected speed grade and account for board skew, connector delay, and transceiver propagation delay rather than relying only on device timing reports.

Do not treat two devices with the same package as interchangeable solely because their land patterns match. The M2GL005 order code contains speed, package, and temperature-related distinctions that can affect timing, qualification, and purchasing. Before substituting a suffix, recompile the FPGA project, review static timing results, verify the configured I/O standards, and compare the exact operating-temperature requirements. Keep the configuration file and production bitstream tied to the approved device identifier, and perform a programming test on the intended assembly.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

A RoHS-compliant statement appears for the related M2GL005-TQG144I ordering option, but no exact compliance declaration for M2GL005-1TQG144 was established. Obtain the current manufacturer material-compliance documentation for the exact MPN before production release.

डेटा सत्यापन तिथि: 2026-11-16 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

m2gl005 vfg256i m2gl005 tqg144i m2gl005 vfg256 m2gl005 tqg144 m2gl005 vfg256i datasheet m2gl005 datasheet M2GL005-1TQG144 datasheet pdf M2GL005-1TQG144 pinout M2GL005-1TQG144 equivalent M2GL005-1TQG144 replacement M2GL005-1TQG144 footprint M2GL005-1TQG144 price M2GL005-1TQG144 stock Microchip M2GL005-1TQG144

संबंधित कंपोनेंट्स और शब्द

Microchip Technology M2GL005-1TQG144 M2GL005-1TQ144 M2GL005-TQG144 M2GL005-1TQG144I M2GL005-TQG144I M2GL005-TQ144 IGLOO2 field-programmable gate array FPGA programmable logic low-density FPGA logic cells embedded RAM fabric RAM user I/O TQFP LQFP surface-mount package 1.2 V core supply protocol bridging sensor acquisition industrial automation Sram-based FPGA FPGA configuration
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें