Analog Devices

MAX312EUE+ - Quad 10Ω SPST Analog Switch | Analog Devices

MPN: MAX312EUE+ ✓ सक्रिय
10Ω maximum Rds(on) 16-pin TSSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MAX312EUE+ अवलोकन

Analog Devices MAX312EUE+ is a four-circuit CMOS analog switch with a 1:1 SPST topology, 10Ω maximum on-resistance, and a 16-pin TSSOP package. The device provides four independently controlled switches that conduct equally well in either signal direction, making it suitable for routing analog, digital, and low-voltage instrumentation signals.

An analog switch is an integrated semiconductor device that connects or disconnects a signal path under digital control. The MAX312EUE+ belongs to the analog switch and multiplexer hierarchy within interface ICs, providing a defined on-state resistance, off-state leakage, and logic-controlled switching behavior. Its four-channel structure consolidates multiple point-to-point routing functions into one package.

Key features include a maximum on-resistance of 10Ω and on-resistance matching of 1.5Ω between channels. Matching is important when several switched paths influence one measurement or signal chain because it helps minimize channel-dependent gain errors. The MAX312 also offers low leakage of 2.5nA at +85°C and equal conduction in both directions, allowing flexible signal-routing topology.

The four SPST switches use CMOS control inputs, enabling each channel to be placed in a defined connection state independently. Four independent switches can support signal isolation, test-point selection, instrumentation routing, or the connection of external circuit sections to a shared analog node. The 16-pin TSSOP package supports surface-mount PCB assembly while keeping the circuit compact.

Typical uses include data-acquisition systems, sensor signal conditioning, automated test equipment, sample-and-hold interfaces, battery-powered instrumentation, and general-purpose analog signal routing. Because the switches support bidirectional conduction, the same device can route either a source signal toward a load or connect a measurement chain back toward its source.

PCB design should place the device near the signals it switches and route high-impedance sensor nodes to minimize parasitic capacitance and leakage. Control traces should remain away from sensitive analog inputs, and unused control inputs should be held at defined logic levels. Verify signal amplitude, bandwidth, temperature, and switch current against the manufacturer datasheet before finalizing the routing design.

This product page combines the manufacturer’s switch specifications with practical PCB guidance, package details, selection criteria, and same-family drop-in alternatives. The comparison and design notes explain how on-resistance matching, leakage, logic control, and package reuse affect engineering decisions when replacing an existing four-channel analog switch.

के लिए ड्रॉप-इन विकल्प MAX312EUE+ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

MAX312CUE+T

✅ ड्रॉप-इन
📦 16-pin TSSOP
Same 10Ω maximum on-resistance and four-SPST architecture; ordering-code temperature and lead-free attributes differ

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX313LEUE+T

✅ ड्रॉप-इन
📦 16-pin TSSOP
Same four-SPST TSSOP footprint and bidirectional switching, but the MAX313 family emphasizes lower power consumption

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX313EUE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 16-pin TSSOP
Same four-SPST package and switch count; power-consumption and dynamic switching specifications differ from MAX312

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX314EUE+

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 16-pin TSSOP
Same four-SPST TSSOP footprint; on-resistance and leakage ratings differ from the MAX312 family specification

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX314CUE+T

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 16-pin TSSOP
Same MAX314 four-SPST TSSOP footprint and pin arrangement, with ordering-code temperature and electrical-rating differences

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MAX312EUE+ Maximum Ratings और Electrical Characteristics

Number of Switches 4 circuits
Switch Configuration 1:1 SPST
On-Resistance 10Ω maximum
On-Resistance Matching Between Channels 1.5Ω
Off-State Leakage 2.5nA at +85°C
Conduction Direction Equal in either direction
Technology CMOS analog switch
पैकेज 16-pin TSSOP
माउंटिंग प्रकार Surface mount
Product Lifecycle Production

MAX312EUE+ 16-pin tssop पिन कॉन्फ़िगरेशन गाइड

MAX312EUE+ (16-pin tssop पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

MAX312EUE+ के लिए 16-pin tssop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MAX312EUE+.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MAX312EUE+ के लिए उपयुक्त है 6 अनुप्रयोगs: Data Acquisition Signal Routing, Sensor Signal Multiplexing, Automated Test Equipment, Battery-Powered Instrumentation, Industrial Control Signal Isolation, Communication Interface Isolation.

🖥️

Data Acquisition Signal Routing

The MAX312EUE+ is suitable for routing multiple sensor or test signals within a data-acquisition system because it combines four independent SPST paths with a maximum on-resistance of 10Ω. Each switch can connect a selected input to a measurement chain or isolate it when not required. The 1.5Ω on-resistance matching limit helps reduce channel-dependent errors, while 2.5nA leakage at +85°C is important when the source impedance is high. Designers should still include the switch resistance and leakage in the measurement uncertainty calculation.

🧩

Sensor Signal Multiplexing

The MAX312EUE+ can route high-impedance sensor outputs into a shared analog front end when only one channel needs to be active at a time. Its four SPST switches provide isolation between channels, equal bidirectional conduction, and low 2.5nA leakage at +85°C. The 10Ω maximum path resistance must be checked against the sensor impedance and settling-time requirements. Place the IC close to the sensor inputs and provide a defined state for every control input during reset and startup.

🔧

Automated Test Equipment

In automated test equipment, the MAX312EUE+ can connect DUT pins, external instruments, or termination networks under digital control. Its four independently addressed SPST channels help reduce the number of discrete relays needed for a compact test interface. Bidirectional conduction supports both excitation and return-path routing, while the 1.5Ω matching specification improves consistency across similar test channels. Engineers should verify switch bandwidth, current rating, and isolation resistance against the exact DUT operating conditions.

⚡

Battery-Powered Instrumentation

The MAX312EUE+ fits battery-powered instruments where four compact SPST paths are needed without a large relay footprint. The CMOS switch conducts in either direction and provides 10Ω maximum on-resistance, allowing the part to route sensor, control, or diagnostic signals. Its low leakage of 2.5nA at +85°C is valuable in high-impedance measurement branches, although system-level leakage from protection devices must also be included. Check the family’s supply range and power-consumption limits in the manufacturer datasheet before finalizing the power budget.

🏭

Industrial Control Signal Isolation

The MAX312EUE+ can isolate or connect signal branches in industrial control and monitoring equipment while remaining compatible with a compact surface-mount layout. Four SPST channels allow a controller to select equipment, isolate a faulted branch, or connect a test point. Equal bidirectional conduction supports feedback and control routing, and 1.5Ω channel matching helps maintain consistent behavior between similar paths. The design must also account for the allowable signal amplitude, logic thresholds, switching transients, and industrial environmental requirements.

🌐

Communication Interface Isolation

The MAX312EUE+ may be used around communication interfaces to route lines into or out of a protected transceiver, test fixture, or secondary circuit domain. Its four SPST switches provide selective connectivity, equal conduction in both directions, and a compact 16-pin TSSOP footprint. The 10Ω maximum on-resistance can affect termination and signal-integrity budgets, particularly on low-voltage lines. Keep routing short, provide a continuous reference plane, and validate control-pin levels during transmitter startup to prevent unwanted state transitions.

What is the MAX312EUE+?
The MAX312EUE+ is a four-circuit CMOS analog switch with a 1:1 SPST configuration and a maximum on-resistance of 10Ω. The Analog Devices product page identifies it as a production device in a 16-pin TSSOP package. Its four independently controlled switches conduct equally well in either direction, making the part suitable for analog and low-voltage signal-routing applications that require multiple switching functions in one package.
What are the key specifications of MAX312EUE+?
The MAX312EUE+ provides four SPST switches, 10Ω maximum on-resistance, 1.5Ω on-resistance matching between channels, and 2.5nA leakage at +85°C. The Analog Devices MAX312 family description also confirms bidirectional conduction. These characteristics make the device relevant to precision signal-routing, test, measurement, and analog interface designs in which channel resistance consistency and low off-state leakage influence measurement accuracy.
Where can I download the MAX312EUE+ datasheet PDF?
The official MAX312 product page on Analog Devices provides access to the manufacturer datasheet and supporting documentation for the MAX312, MAX313, and MAX314 family. Open the Analog Devices MAX312 product page, select the Data Sheet resource, and confirm that the document covers the MAX312EUE+ ordering suffix. The product page is the appropriate source for the latest revision and any manufacturer notices.
Where can I find the MAX312EUE+ pinout?
Use the pin-description table and package drawing in the Analog Devices MAX312 datasheet to assign the MAX312EUE+ pins. The device is supplied in a 16-pin TSSOP package, but the individual pin numbers and signal names are not published in the accessible product summary. The datasheet should also be checked for the exposed pad, exposed lead, or other package-specific connection requirements before PCB routing is released.
What is the best drop-in replacement for MAX312EUE+?
The MAX312CUE+T is the closest same-brand, same-family candidate identified for the MAX312EUE+ because it uses the same 16-pin TSSOP format and shares the MAX312 four-SPST switch architecture. MAX313LEUE+T and MAX314-series devices may share the footprint but have different power or resistance characteristics. Confirm logic thresholds, supply range, on-resistance, leakage, and every signal pin against the manufacturer datasheet before approving a substitution.
Can MAX313LEUE+T replace MAX312EUE+?
The MAX313LEUE+T can be considered as a footprint-compatible replacement only after its electrical behavior is checked against the MAX312EUE+. A comparison source places both parts in the same 16-pin TSSOP family, but the MAX313 is positioned as a lower-power family member. Verify supply voltage, control thresholds, on-resistance, leakage, switching behavior, and application-specific timing before using it as a drop-in substitute.
MAX312EUE+ vs MAX312CUE+T - which is better for a new design?
The MAX312EUE+ is the appropriate selection when the design requires the exact MAX312EUE+ ordering configuration; the MAX312CUE+T is the closest identified same-family alternative with a matching 16-pin TSSOP footprint. The decisive checks are the ordering-code temperature range, supply limits, logic thresholds, and production configuration. Both devices belong to the MAX312 family with 10Ω maximum on-resistance and 1.5Ω channel matching.
When should I choose MAX312EUE+ over MAX314-series alternatives?
Choose the MAX312EUE+ when the design requires the MAX312 family’s specified 10Ω maximum on-resistance and 1.5Ω matching behavior in a four-channel SPST 16-pin TSSOP device. A MAX314-family alternative may be considered when its on-resistance, leakage, supply range, and logic behavior provide a better overall fit. Selection should prioritize the complete electrical specification rather than package similarity alone.
Is MAX312EUE+ suitable for bidirectional analog signal routing?
Yes, the MAX312EUE+ supports equal conduction in either direction and provides four independent 1:1 SPST switching paths. This makes it suitable for routing an analog signal toward a load or connecting a measurement chain back toward its source. The on-resistance of 10Ω maximum and channel matching of 1.5Ω should be included in the signal-path error budget, particularly for high-impedance sources.
How much off-state leakage does MAX312EUE+ have?
The MAX312EUE+ has an off-state leakage of 2.5nA at +85°C, according to the Analog Devices MAX312 family information. Low leakage is especially important when routing high-impedance sensor nodes because the switch contributes directly to the input’s error current. Account for temperature, source impedance, and any leakage through external protection components when calculating the measurement uncertainty.
What PCB layout practices matter for MAX312EUE+?
Place the MAX312EUE+ close to the switched signal nodes and keep control traces away from high-impedance analog inputs. Route sensitive signals over a continuous ground plane, and keep switching-node capacitance and leakage paths away from sensitive sources. According to the Analog Devices MAX312 documentation, the device is a 16-pin TSSOP part; use the manufacturer package drawing and pin table to implement the exact footprint.
Where can I buy MAX312EUE+ and what is its current lead time?
Use the Request a Quote form on this page to request MAX312EUE+ availability, current lead time, minimum order quantity, and a quotation from XAIPART. The device is identified by Analog Devices as a production part, but current stock and delivery schedules can vary by package, quantity, and market conditions. A direct quote request provides the most appropriate commercial response for the exact MPN.
Is MAX312EUE+ in stock?
Current stock for MAX312EUE+ should be confirmed through the Request a Quote form on this page using the exact MPN MAX312EUE+. The Analog Devices product page lists the MAX312 family as production, but that status does not guarantee inventory, allocation, or a fixed delivery date. Include required quantity, target price, and delivery location with the request for a current supply response.
What is the price of MAX312EUE+?
Submit the MAX312EUE+ requirement through the Request a Quote form on this page for the current unit price and volume breaks. Market pricing depends on quantity, package suffix, lead time, and supply conditions, so a static price can become stale. The quote request allows the exact MAX312EUE+ ordering code and required quantity to be evaluated together.
Is the MAX312EUE+ RoHS and REACH compliant?
The RoHS and REACH status must be confirmed from the manufacturer’s current product documentation or declaration for the MAX312EUE+ ordering configuration. Compliance is not automatically inherited from the MAX312 family name because declarations can vary by package and ordering suffix. The Analog Devices MAX312 product page is the appropriate starting point for current environmental and material-compliance documentation.
Can I use MAX314EUE+ as a MAX312EUE+ replacement?
The MAX314EUE+ may be a footprint-compatible option, but it should not be treated as an automatic drop-in replacement for the MAX312EUE+. Although the devices belong to the same manufacturer family, the MAX314 can differ in on-resistance and related electrical ratings. Compare pin assignments, supply range, control thresholds, leakage, switching speed, and rated signal conditions before substituting it in an existing design.

के लिए इंजीनियरिंग संदर्भ डेटा MAX312EUE+ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the MAX312EUE+ when a design requires four independent SPST analog switches, bidirectional conduction, and the MAX312 family’s specified maximum on-resistance of 10Ω and channel matching of 1.5Ω. It is particularly suitable for high-impedance signal routing because the family specifies 2.5nA leakage at +85°C. The MAX312CUE+T is the closest same-family option when that ordering configuration fits the required temperature and production conditions. Consider the MAX313LEUE+T when lower power consumption is more important than the specifically stated MAX312 resistance-matching and leakage limits. MAX313EUE+ and MAX314EUE+ may suit designs with different family-level electrical priorities, but each replacement requires pin, supply, logic-threshold, leakage, resistance, bandwidth, and signal-rating verification. Package reuse alone is not sufficient for a safe drop-in decision.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MAX312CUE+T MAX313LEUE+T MAX313EUE+ MAX314EUE+
Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP
Brand Analog Devices Analog Devices Analog Devices Analog Devices Analog Devices
Number of Switches 4 circuits 4 circuits 4 circuits 4 circuits 4 circuits
Switch Configuration 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST 1:1 SPST
Bidirectional Conduction Yes Yes Yes Yes Yes
Technology CMOS analog switch CMOS analog switch CMOS analog switch CMOS analog switch CMOS analog switch
Power-Consumption Positioning MAX312 family performance profile MAX312 family performance profile Lower-power MAX313 family positioning MAX313 family positioning MAX314 family positioning

मुख्य विशेषताएँ

  • Defined channel matching for consistent multi-path routing (बनामMAX313LEUE+T)
  • Low leakage for high-impedance signal paths (बनामMAX314EUE+)
  • Bidirectional routing with a compact four-channel package (बनामMAX313EUE+)

डिज़ाइन नोट्स

Place the MAX312EUE+ near the switched analog nodes and route each channel as a short, continuous path. High-impedance sensor lines should be kept away from digital control traces, switching-node capacitance, and external connector fields. Use a continuous ground plane beneath the TSSOP footprint and follow the manufacturer package drawing for pad geometry. Short sensitive traces reduce parasitic capacitance and help preserve the accuracy expected from the specified 2.5nA leakage at +85°C.

Include the maximum 10Ω on-resistance in the signal-path gain and settling-time budget. The 1.5Ω matching limit is relevant when several channels are compared or used for calibration, so do not assume identical insertion loss across all paths. For high-frequency or precision applications, verify bandwidth, charge injection, off-state isolation, and switching time in the current manufacturer datasheet before fixing the layout and impedance values.

Do not leave control inputs floating. Define the state of every control pin during reset, power-up, and power-down so that sensitive nodes are not connected accidentally. Check the family’s supply voltage and logic thresholds before sharing a control net with a processor. Also verify that the applied signal amplitude remains within the switch ratings; package compatibility alone does not guarantee identical electrical limits across MAX312, MAX313, and MAX314 alternatives.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance declarations for the exact MAX312EUE+ ordering configuration were not identified in the accessible manufacturer product summary. Confirm current declarations with Analog Devices before releasing the component into a regulated production design.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MAX312EUE+ datasheet MAX312EUE+ pinout MAX312EUE+ datasheet pdf MAX312EUE+ equivalent MAX312EUE+ replacement MAX312EUE+ cross reference MAX312EUE+ price MAX312EUE+ stock Analog Devices MAX312EUE+ MAX312 TSSOP-16 pinout MAX312EUE+ analog switch MAX312EUE+ vs MAX313LEUE+T

संबंधित कंपोनेंट्स और शब्द

Analog Devices MAX312EUE+ MAX312CUE+T MAX313LEUE+T MAX313EUE+ MAX314EUE+ MAX314CUE+T analog switch SPST switch multiplexer interface IC CMOS analog switch TSSOP-16 TSSOP package family surface-mount package on-resistance on-resistance matching off-state leakage bidirectional conduction signal routing data acquisition test equipment high-impedance sensor interface
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें