MC9S12B64CPVE - 16-Bit 25MHz 64KB MCU | NXP | Automotive
MPN: MC9S12B64CPVE ✓ सक्रियMC9S12B64CPVE अवलोकन
A microcontroller is a programmable semiconductor containing a processor core, memory, and peripheral interfaces on one integrated circuit. The HCS12 family belongs to the embedded-microcontroller hierarchy and uses a 16-bit CISC architecture. Compared with simpler 8-bit controllers, the MC9S12B64CPVE provides a 25 MHz processing clock and substantially more embedded Flash storage, making it suitable for automotive electronic control units that combine several real-time I/O, communications, and control tasks.
The principal device characteristics include a 16-bit CPU, 25 MHz maximum clock, 64 KB Flash organized as 64K x 8, and a 112-LQFP package measuring 20 x 20 mm. The part is identified as an automotive-grade HCS12 member and is manufactured using CMOS technology. Reflow-handling data identifies MSL 3, a 260 °C peak reflow temperature, and a 40-second maximum peak-temperature dwell for the specified package.
The 64 KB Flash configuration provides embedded program storage for startup routines, interrupt handlers, diagnostic logic, communication protocols, and application control code. A 25 MHz clock allows the CPU to service multiple peripheral activities within a defined control interval. Because the device is based on the HCS12 CISC architecture, existing automotive control-unit software and peripheral-driver patterns can remain useful when qualifying a design around this family.
Typical uses include body and comfort control modules, sensor interface controllers, gateway and communications equipment, motor or actuator controllers, and other embedded automotive subsystems. The combination of automotive positioning, Flash memory, and a large LQFP footprint supports designs requiring numerous external connections and a substantial number of mixed-signal or digital I/O functions.
Layout planning should preserve the manufacturer's recommended power, ground, decoupling, and programming-test connections. The large LQFP package has a 0.5 mm pitch, so assembly should use a PCB designed for fine-pitch quad flat-pack handling and should account for thermal performance, soldering profiles, and signal-integrity requirements. Use the manufacturer pin-description and connection tables when assigning every external signal.
This page consolidates the verified device identity, package and process characteristics, practical automotive use cases, and constraints involved in drop-in sourcing. It also distinguishes exact-footprint alternatives from functional substitutes, helping engineers assess PCB compatibility before committing to a replacement.
के लिए ड्रॉप-इन विकल्प MC9S12B64CPVE — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं MC9S12B64CPVE (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Supply Voltage, Package, Program Memory Size.
MC9S12A64CPVE
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MC9S12D64CPVE
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MC9S12B64CPVE Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit HCS12 microcontroller |
| Maximum CPU Clock | 25 MHz |
| Flash Memory | 64 KB |
| Flash Organization | 64K x 8 |
| CPU Architecture | 16-bit CISC |
| MCU Series | HCS12 |
| सप्लाई वोल्टेज | 5 V |
| पैकेज | 112-LQFP |
| Package Dimensions | 20 x 20 mm |
| Package Type | Tray |
| माउंटिंग प्रकार | Surface mount |
| Technology | CMOS |
| Moisture Sensitivity Level | MSL 3 |
| Maximum Peak Reflow Temperature | 260 °C |
| Maximum Time at Peak Reflow Temperature | 40 s |
| Terminal Finish | Tin (Sn) |
| JESD-609 Code | e3 |
| Automotive Positioning | Automotive |
MC9S12B64CPVE tray पिन कॉन्फ़िगरेशन गाइड
MC9S12B64CPVE (tray पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MC9S12B64CPVE.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MC9S12B64CPVE के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive Body Control Module, Vehicle Sensor Interface Controller, Automotive Communications Gateway, Motor and Actuator Control, Body Comfort and Lighting, Diagnostic and Test Controller.
Automotive Body Control Module
The MC9S12B64CPVE fits an automotive body-control module that coordinates switches, lamps, locks, sensors, and diagnostic functions. Its 25 MHz 16-bit HCS12 processor provides real-time control capability, while 64 KB of Flash stores application code, diagnostic routines, and interrupt handlers. The 112-LQFP footprint offers 112 physical positions for power, ground, I/O, and communication connections. Designers should verify that every required timer, serial interface, port, and wake-up signal in the body-control design is present in the B64 peripheral configuration before releasing firmware, and should apply the automotive qualification requirements appropriate to the finished module.
अनुशंसित
Vehicle Sensor Interface Controller
The MC9S12B64CPVE can serve as the central controller for an automotive sensor interface module that combines digital inputs, analog monitoring functions, and diagnostic reporting. A 25 MHz clock gives the 16-bit CISC core sufficient scheduling capacity for periodic sampling, filtering, fault detection, and communication servicing. Its 64 KB Flash budget can hold configuration tables, calibration values, and application firmware without requiring external program memory in many designs. The 112-LQFP package provides a generous pin count for sensor connections, ground returns, supply distribution, and interface signals. Validation must include signal levels, input thresholds, timing margins, and the exact peripheral assignments documented for this device.
अनुशंसित
Automotive Communications Gateway
The MC9S12B64CPVE is suitable for a communications gateway that must route or monitor messages between vehicle networks while maintaining deterministic control behavior. Its 25 MHz HCS12 processor can manage protocol tasks and service multiple interrupt-driven events, and the 64 KB Flash capacity accommodates gateway logic, message tables, diagnostics, and communication firmware. The 112-LQFP package provides sufficient physical pins for network interfaces, wake lines, supervision signals, and separated supply connections. The main engineering consideration is exact peripheral matching: confirm that the required CAN, serial, timer, and interrupt resources are configured as expected. Firmware drivers should be qualified for the selected family and device revision before production deployment.
अनुशंसित
Motor and Actuator Control
The MC9S12B64CPVE can support a motor or actuator controller when the design requires deterministic embedded logic, multiple digital control signals, and embedded program storage. Its 16-bit CISC processor operates at 25 MHz, allowing timing-sensitive routines to coexist with monitoring and communication tasks. The 64 KB Flash region is suitable for control algorithms, state tables, fault handling, and calibration code, while the 112-LQFP package can accommodate pulse inputs, outputs, position feedback, and protection signals. The MCU does not replace the power stage, motor driver, current sensing, or protective hardware. Those external circuits must be designed for the load, while firmware provides fast control and fault-management functions using the exact documented timer and I/O resources.
अनुशंसित
Body Comfort and Lighting
The MC9S12B64CPVE fits lighting and body-comfort electronics that coordinate switches, indicators, and timed functions in an automotive environment. The 25 MHz processor supports responsive state-machine and debounce logic, while 64 KB of Flash can store operating modes, timers, diagnostics, and event logic. Its 112-LQFP package offers enough I/O density for multiple output banks, input sensing, and communication links without relying on a small microcontroller package. Load drivers, protection networks, and dimming stages remain external because the MCU primarily handles control and sequencing. Qualification should focus on output switching states, standby behavior, wake sources, supply variation, transient immunity, and whether the selected B64 peripheral set matches every planned assignment.
अनुशंसित
Diagnostic and Test Controller
The MC9S12B64CPVE is appropriate for a diagnostic or test controller embedded in an automotive electronic module. Its 25 MHz 16-bit processor can execute self-test routines, monitor internal and external signals, and service communication interrupts, while the 64 KB Flash capacity provides space for diagnostic tables and background firmware. The 112-LQFP package simplifies access to test points, programming signals, sensor inputs, and actuator outputs in a multilayer PCB. During implementation, confirm the programming and debug connectivity, reset behavior, watchdog availability, and required timer channels in the manufacturer documentation. The controller should be designed so diagnostics can run without disturbing critical real-time tasks, using bounded interrupt latency and a clear scheduling strategy.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MC9S12B64CPVE — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MC9S12A64CPVE | MC9S12D64CPVE |
|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) | 112-LQFP (20x20 mm) |
| Product Type | 16-bit HCS12 microcontroller | HCS12 microcontroller | HCS12 microcontroller |
| CPU Architecture | 16-bit CISC | 16-bit CISC | 16-bit CISC |
| Flash Memory | 64 KB | 64 KB | 64 KB |
| Peripheral and Software Resources | MC9S12B64 family resource set | MC9S12A64 family resource set | MC9S12D64 family resource set |
मुख्य विशेषताएँ
- Matches the core capacity of the closest same-package family alternatives (बनामMC9S12A64CPVE)
- Preserves package and memory layout across the D64 alternative (बनामMC9S12D64CPVE)
- Directly specified 25 MHz 16-bit HCS12 configuration (बनामMC9S12A64CPVE)
डिज़ाइन नोट्स
Design the PCB for the exact 112-LQFP 20 x 20 mm footprint and its 0.5 mm lead pitch. Place all decoupling capacitors directly between the appropriate power and ground pins, use short and wide supply paths, and provide a continuous ground plane wherever the package permits. Confirm pad dimensions, courtyard, solder-mask clearance, and assembly restrictions against the manufacturer package drawing rather than scaling a generic LQFP footprint.
Use the manufacturer's recommended power network and bypass arrangement for the 5 V automotive operating condition. Separate or carefully control return paths for noisy actuators and communication interfaces so switching current does not flow through sensitive signal ground references. Validate startup, brownout behavior, load transients, and supply ripple against the final module configuration; the MCU itself cannot correct unstable or noisy input voltage.
The 112-LQFP package provides a large thermal and electrical interface, but thermal performance depends on the PCB copper area and internal plane construction. Estimate junction temperature from actual processor dissipation, ambient temperature, and the completed-board thermal path. Provide thermal vias and adequate copper where the footprint permits, while avoiding voids that impair heat transfer. Validate the hottest operating mode in the assembled enclosure rather than relying only on package dimensions.
Do not treat a shared CPVE package as proof that firmware or pin multiplexing is interchangeable. Before substituting MC9S12A64CPVE or MC9S12D64CPVE, build a pin-by-pin and peripheral-by-peripheral comparison, check interrupt vectors and timer assignments, and review the programming and debug interfaces. Preserve the physical footprint, then perform firmware, timing, and system-level regression testing on the exact production device.
Separate clock, communication, and sensitive input routes from switching-node and actuator-drive paths. Use a sensible ground partition only where it does not interrupt high-frequency return paths, and terminate externally driven signals according to their actual edge rates. Because this is a fine-pitch LQFP assembly, inspect solder joints for bridging, incomplete wetting, and tombstoning, and control board moisture exposure to satisfy the MSL 3 handling requirement.
अनुपालन जानकारी
The device is identified as an automotive HCS12 microcontroller. The JESD-609 e3 code and tin terminal finish are documented, but RoHS, REACH, halogen-free, and conflict-minerals status are not explicitly stated.