Microchip Technology

MCP3301T-CI/MS - 13-Bit SPI ADC | Microchip Technology

MPN: MCP3301T-CI/MS ✓ सक्रिय
2.7 V to 5.5 V Vdss 8-pin MSOP Package
न्यूनतम ऑर्डर मात्रा: 1 |

MCP3301T-CI/MS अवलोकन

The Microchip Technology MCP3301T-CI/MS is a 13-bit, single-channel successive-approximation analog-to-digital converter with a fully differential input, operating from a 2.7 V to 5.5 V supply and communicating through an SPI-compatible serial interface. It is packaged in an 8-pin MSOP with a nominal operating temperature range of -40 °C to +85 °C. The MCP3301 family combines low power consumption with a compact package for battery-powered systems and remote data-acquisition equipment.

An ADC is a mixed-signal semiconductor that converts an analog voltage into a digital code for processing, measurement, storage, or control. The MCP3301 belongs to the SAR ADC hierarchy, where a successive-approximation conversion produces one output bit during each comparison cycle. Its differential input accepts a voltage difference between two analog nodes rather than measuring a single input relative to ground. This architecture is useful when the signal source is balanced, when noise common to both input nodes should be rejected, or when a current-sense or bridge circuit must be measured around a midpoint.

Key features include 13-bit resolution, one differential analog-input channel, SPI-compatible communication, low-power operation, and an 8-MSOP package. The converter supports both single-ended and differential measurements, allowing the same device to serve compact sensing systems, temperature probes, pressure transducers, potentiometers, and other analog front ends. Its small package and low power consumption are especially valuable in remote sensors and portable instruments where board area and energy budget are tightly constrained.

The MCP3301 uses a sample-and-hold architecture and an internal reference arrangement selected through the serial interface. During conversion, the SAR logic compares the sampled input against an internally generated DAC value. The resulting code is shifted out through the serial data output, while chip select and clock signals coordinate the transaction with the host controller. The SPI interface simplifies connection to microcontrollers while allowing the ADC to share a controlled bus with other compatible peripherals.

Typical applications include battery-powered environmental monitors, industrial remote sensing nodes, laboratory measurement instruments, process-control equipment, and low-energy data loggers. The differential input can be connected to bridge sensors or differential signal sources, while a grounded input arrangement can be used where a single-ended source is more convenient. Designers should preserve a quiet analog ground and place input and reference components close to the device to minimize pickup and conversion error.

For a new design, first confirm the analog input range, reference arrangement, conversion timing, and SPI mode against the manufacturer datasheet. Pay particular attention to source impedance and acquisition time: the sampling network must charge the internal sample-and-hold capacitor sufficiently before conversion. This page also organizes package information, practical design guidance, sourcing questions, and qualified drop-in alternatives for faster component evaluation.

के लिए ड्रॉप-इन विकल्प MCP3301T-CI/MS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

MCP3301-CI/MS

✅ ड्रॉप-इन
📦 8-MSOP
Same MCP3301 electrical function and 8-MSOP pinout; ordering format differs by 0% in the published function and 1% overall because T identifies tape-and-reel presentation

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

MCP3301T-CI/MS Maximum Ratings और Electrical Characteristics

ADC Type Successive-approximation-register (SAR) ADC
रेज़ोल्यूशन 13 bits
Number of Input Channels 1 channel
Input Architecture Fully differential
इंटरफ़ेस SPI-compatible serial interface
Supply Voltage Range 2.7 V to 5.5 V
Low-Power Consumption Low-power operation for battery-powered systems
पैकेज 8-pin MSOP
माउंटिंग प्रकार Surface mount
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C
Analog Input Modes Differential or single-ended
Conversion Architecture Sample-and-hold input with SAR conversion
Primary Applications Battery-powered systems and remote data acquisition
Manufacturer Microchip Technology
Device Type Analog-to-digital converter

MCP3301T-CI/MS 8-pin msop पिन कॉन्फ़िगरेशन गाइड

MCP3301T-CI/MS (8-pin msop पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

MCP3301T-CI/MS के लिए 8-pin msop पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MCP3301T-CI/MS.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

MCP3301T-CI/MS के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Environmental Sensors, Bridge-Based Pressure Measurement, Remote Data Acquisition, Battery-Powered Portable Instruments, Industrial Process Monitoring, Current and Voltage Sensing.

🧩

Battery-Powered Environmental Sensors

The MCP3301T-CI/MS fits compact environmental monitors because it combines a 13-bit SAR converter, a fully differential input, and low-power operation in an 8-pin MSOP package. A temperature, humidity, or gas sensor can feed the differential input while the host microcontroller controls the SPI-compatible interface. The 2.7 V to 5.5 V supply range supports low-energy designs. Keep sensor excitation and ADC traces away from switching nodes, place input and reference capacitors close to the converter, and verify acquisition time against the sensor’s output impedance.

🏭

Bridge-Based Pressure Measurement

The MCP3301T-CI/MS is appropriate for differential bridge sensing because its single analog channel measures the difference between two sensor nodes. This can reduce sensitivity to common-mode voltage in pressure, load, and position transducers while retaining 13-bit resolution. The bridge excitation and ADC supply should share a carefully managed reference strategy. Confirm that the bridge output remains inside the converter’s differential and common-mode limits, and use the manufacturer’s reference and input-bias guidance when selecting resistors.

🌐

Remote Data Acquisition

MCP3301T-CI/MS supports remote data-acquisition modules that periodically measure an analog sensor and transfer the result through a serial link. The 13-bit resolution captures many process and instrumentation signals, while the 8-MSOP footprint preserves board area. The device’s SPI-compatible interface simplifies connection to a microcontroller, but the host must handle chip select, clocking, and conversion sequencing correctly. For low-duty-cycle systems, use power-saving modes between measurements and confirm the active current from the manufacturer datasheet.

🔧

Battery-Powered Portable Instruments

The MCP3301T-CI/MS is useful in portable measurement instruments where a compact, low-power ADC is needed for analog inputs. Its 13-bit resolution, differential-input capability, and SPI-compatible communication suit handheld probes, service tools, and compact test equipment. Differential sensing can improve measurement integrity when both probe nodes are balanced, while a grounded single-ended arrangement remains possible for simpler sensors. Check the input common-mode range at every operating point and reserve copper around the analog pins for filtering and decoupling.

🏭

Industrial Process Monitoring

MCP3301T-CI/MS can digitize low-level process signals in compact industrial monitoring equipment. The fully differential input is advantageous for transducer signals and current-sense voltages, while the SPI interface allows connection to a dedicated controller or microcontroller. Industrial systems should isolate the converter from noisy motors and relays, maintain a continuous ground reference, and validate the reference network against temperature and supply variation. The 8-pin MSOP package reduces board space but requires careful fanout and decoupling.

⚡

Current and Voltage Sensing

The MCP3301T-CI/MS is suitable for measuring differential voltages produced by shunt resistors, instrument amplifiers, or other current-sense circuits. Differential operation reduces sensitivity to voltage common to both inputs, and the 13-bit result provides useful resolution for control and reporting. The signal must stay within the ADC’s input range, and the shunt and amplifier must settle before the sample-and-hold capacitor acquires the signal. Confirm acquisition-time requirements for the selected source impedance before fixing the conversion rate.

Where can I download the MCP3301T-CI/MS datasheet PDF?
The MCP3301T-CI/MS datasheet is available through the manufacturer’s MCP3301 product page, with the full technical information distributed as the MCP3301 datasheet PDF. The product page identifies the device as a 13-bit ADC with a fully differential input, SPI-compatible serial interface, low power consumption, and an 8-pin MSOP package. Use the manufacturer document for the authoritative pin-description table, electrical characteristics, timing diagrams, reference configurations, and recommended application circuit.
What are the key specifications of MCP3301T-CI/MS that engineers should know?
The MCP3301T-CI/MS is a 13-bit, one-channel SAR ADC with a fully differential input, a 2.7 V to 5.5 V operating supply range, and an SPI-compatible interface. It is offered in an 8-pin MSOP package and is identified by Microchip as a low-power device intended for battery-powered systems and remote data acquisition. These core characteristics make it suitable for compact sensor nodes, portable instruments, and industrial measurement systems.
Is MCP3301T-CI/MS suitable for battery-powered sensor applications?
Yes, MCP3301T-CI/MS is suitable for battery-powered sensor applications because the MCP3301 family is specifically designed for low-power operation and compact remote data acquisition. Its 13-bit conversion resolution supports many precision-oriented measurements, while the single differential channel and 8-pin MSOP package simplify space-constrained circuit layouts. Confirm the complete operating current and shutdown behavior against the manufacturer datasheet for the required duty cycle.
What can replace MCP3301T-CI/MS?
MCP3301-CI/MS is the closest same-brand drop-in candidate because it belongs to the same MCP3301 family and uses the same 8-MSOP configuration, with the T ordering code distinguishing the provided tape-and-reel format. Other exact replacements should be selected only after confirming the manufacturer pin description, electrical limits, temperature grade, and reference configuration. Request a Quote on this page for availability and lead-time confirmation for the exact suffix.
Is MCP3301-CI/MS the same as MCP3301T-CI/MS?
MCP3301-CI/MS and MCP3301T-CI/MS are members of the same MCP3301 ADC family, but the ordering suffixes specify different packing formats. The MCP3301T-CI/MS is supplied in tape-and-reel form, while MCP3301-CI/MS is associated with tube or tray ordering. Their electrical functionality and 8-MSOP device construction can be the same, so the distinction matters primarily to manufacturing and fulfillment rather than to circuit design.
Where can I find the MCP3301T-CI/MS pinout?
The MCP3301T-CI/MS pinout is found in the pin-description table and package drawings in the MCP3301 manufacturer datasheet. The device uses an 8-pin MSOP package, so the pin list contains eight numbered positions and includes the analog inputs, supply, ground, reference connections, clock, data, and chip-select functions. Use that table for PCB routing and confirm exposed-pad and thermal-layout requirements from the package drawing.
What is the difference between MCP3301 and MCP3302?
The MCP3301 and MCP3302 are both Microchip 13-bit SPI ADCs, but they are not pin-for-pin drop-in replacements for this design. The MCP3301 is identified as a one-channel differential-input converter, while the MCP3302 family provides a different channel and input configuration. The MCP3301T-CI/MS should therefore be replaced with a part that preserves the 8-MSOP footprint, pin functions, input range, interface timing, and electrical limits.
What is the best Microchip equivalent for MCP3301T-CI/MS?
MCP3301-CI/MS is the closest Microchip equivalent because it is the same MCP3301 family member in the 8-MSOP package with matching device functionality. The primary ordering difference is the reel or tape presentation. Before treating it as a drop-in replacement, verify the ordering code, pinout, temperature grade, reference arrangement, and packing quantity in the MCP3301 datasheet and the current Microchip product documentation.
When should I choose MCP3301T-CI/MS over MCP3301-CI/MS?
Choose MCP3301T-CI/MS when the assembly process uses reel-fed pick-and-place equipment and the exact tape-and-reel ordering suffix is required. Choose MCP3301-CI/MS when tube or tray presentation is preferable for the manufacturing flow. The electrical choice is largely the same because both identify the MCP3301 13-bit differential SAR ADC family, but procurement, reel handling, and assembly logistics should determine the final ordering code.
Is MCP3301T-CI/MS suitable for measuring a bridge sensor?
Yes, the fully differential input of MCP3301T-CI/MS is well suited to bridge-sensor measurements because the converter can measure the voltage difference between two sensor nodes. This arrangement helps reject common-mode voltage and is appropriate for resistive bridges, current-sense elements, and other balanced analog sources. The input common-mode range, differential input range, source impedance, and reference voltage must be checked against the manufacturer specifications.
How should I connect a single-ended sensor to MCP3301T-CI/MS?
A single-ended sensor can be connected by arranging the unused differential input as the proper return reference and configuring the device for single-ended measurement. The signal source must remain within the converter’s input and common-mode limits, and its output impedance must allow the sample-and-hold capacitor to acquire the required voltage. Review the manufacturer’s single-ended and differential application circuits before finalizing resistor values and grounding.
What is the lead time for MCP3301T-CI/MS?
The current lead time for MCP3301T-CI/MS depends on inventory, order quantity, and the requested manufacturing package. Use the Request a Quote form on this page and provide the quantity, target date, and reel requirements to obtain a current sourcing response. For new production builds, include the date code and lot-traceability requirement in the request rather than relying on an unconfirmed historical interval.
Where can I buy MCP3301T-CI/MS at a current price?
Use the Request a Quote form on this page to request the current unit price, stock position, and lead time for MCP3301T-CI/MS. Include the required quantity and specify whether you need the tape-and-reel presentation represented by the T ordering code. The platform can then confirm the appropriate fulfillment channel and provide a current quotation without relying on an outdated catalog price.
Is MCP3301T-CI/MS currently in stock?
MCP3301T-CI/MS availability must be confirmed for the exact order quantity through the Request a Quote form on this page. Inventory can change between production allocations and individual reel orders, while the T suffix specifically identifies the tape-and-reel ordering configuration. Submit the required reel count, approved manufacturer or non-approved sourcing preference, target date, and any traceability requirements with the request.
What are the power and thermal considerations for MCP3301T-CI/MS?
MCP3301T-CI/MS is a low-power 8-pin MSOP converter intended for portable and remote systems, but the PCB still requires sound supply decoupling and thermal attention. Place the input and reference capacitors close to their associated pins, maintain continuous ground-plane return paths, and avoid routing high-current digital signals beneath the analog inputs. Use the manufacturer’s recommended layout and electrical limits to evaluate dissipation under the selected supply and conversion rate.

के लिए इंजीनियरिंग संदर्भ डेटा MCP3301T-CI/MS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose MCP3301T-CI/MS for a new reel-fed assembly requiring the exact T ordering format. It provides a 13-bit SAR conversion, one fully differential channel, a 2.7 V to 5.5 V supply range, and an SPI-compatible interface in an 8-MSOP package. Choose MCP3301-CI/MS when the same electrical device is acceptable but tube or tray presentation better matches the manufacturing flow. Confirm that the alternative has the same pinout, reference arrangement, temperature grade, and electrical limits before release. No additional same-package alternatives can be recommended without stronger pin-level evidence. Parts such as MCP3302-family devices are not substitutes because their channel and input arrangements differ. For low-energy sensing, bridge measurement, process monitoring, or portable instrumentation, the key checks are input common-mode range, reference configuration, acquisition time, source impedance, and SPI timing.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद MCP3301-CI/MS
Package 8-MSOP 8-MSOP
Brand Microchip Technology Microchip Technology
ADC Type SAR ADC SAR ADC
Resolution 13 bits 13 bits
Input Channels 1 channel 1 channel
Input Architecture Fully differential Fully differential
Interface SPI-compatible SPI-compatible
Supply Voltage Range 2.7 V to 5.5 V 2.7 V to 5.5 V
Ordering Format T tape-and-reel ordering code Non-T ordering format

मुख्य विशेषताएँ

  • Reel-oriented ordering option (बनामMCP3301-CI/MS)
  • Differential measurement in a compact package (बनामMCP3301-CI/MS)
  • Low-power acquisition in an 8-MSOP (बनामMCP3301-CI/MS)

डिज़ाइन नोट्स

Place the input bypass and reference components directly beside their associated MCP3301 pins, and route the analog inputs away from clock, chip-select, and switching-node traces. Maintain a continuous ground plane beneath the 8-MSOP and use a quiet analog return path for the input reference. Differential pairs should be routed with consistent geometry and minimal length difference. These layout practices reduce conversion error and make the SPI return paths less susceptible to coupled noise.

Check the source impedance and conversion sequence before selecting the maximum sampling rate. The sample-and-hold capacitor must acquire the input voltage before the SAR comparison begins; a high-impedance sensor may require a buffer or a longer acquisition interval. Similarly, do not assume every pin is interchangeable between similar ADC families. Verify the 8-MSOP pin names, common-mode limits, reference voltage, and timing directly in the manufacturer pin-description table and application circuits.

Use a low-impedance supply and reference arrangement with local high-frequency decoupling, then keep analog filtering current out of the digital return path. The MCP3301 is designed for low-power systems, so shutdown behavior and active duty cycle should be selected deliberately rather than inferred from converter performance alone. Verify startup, reference settling, and supply-current behavior at the system’s slowest clock and highest intended conversion rate before releasing the design for production.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product material describes the MCP3301 family as suitable for battery-powered and remote data-acquisition systems but does not state the requested compliance classifications.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

MCP3301T-CI/MS datasheet MCP3301T-CI/MS pinout MCP3301T-CI/MS datasheet pdf MCP3301T-CI/MS equivalent MCP3301T-CI/MS replacement MCP3301T-CI/MS cross reference MCP3301T-CI/MS price MCP3301T-CI/MS stock MCP3301T-CI/MS 8-MSOP MCP3301T-CI/MS vs MCP3301-CI/MS MCP3301 13-bit differential ADC Microchip MCP3301T-CI/MS

संबंधित कंपोनेंट्स और शब्द

Microchip Technology MCP3301T-CI/MS MCP3301 MCP3301-CI/MS MCP3301 family ADC analog-to-digital converter SAR ADC successive-approximation-register mixed-signal IC fully differential input single-ended measurement SPI SPI-compatible serial interface sample-and-hold 8-MSOP MSOP package surface-mount package semiconductor battery-powered systems remote data acquisition bridge sensor process monitoring 2.7 V to 5.5 V supply
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें