MSP430F4784IPZ - 16MHz 48KB Flash Metering MCU | Texas Instruments
MPN: MSP430F4784IPZ ✓ सक्रियMSP430F4784IPZ अवलोकन
An MCU is a programmable semiconductor containing a processor core, memory, and peripherals on one integrated circuit. The MSP430 family belongs to the embedded-controller and power-management hierarchy, using a 16-bit RISC architecture optimized for low-power measurement. Its five low-power modes help reduce energy consumption when a meter is mostly idle, while the mixed-signal peripherals acquire analog quantities and drive segmented displays without requiring a separate interface processor.
The MSP430F4784IPZ provides four sigma-delta ADCs for metering-oriented signal acquisition and supports a 160-segment LCD. Its 48 KB Flash capacity supports firmware, calibration data, and metering algorithms, while 2 KB of RAM provides working memory for acquisition and display processing. The 16 MHz CPU clock supports timely execution of measurement routines and communication tasks, and the industrial-temperature ordering option is identified by the IPZ suffix.
The device belongs to the MSP430x47x4 mixed-signal controller family. Its architecture combines a 16-bit RISC CPU with dedicated analog measurement and LCD resources, reducing the component count required in a meter design. The four sigma-delta channels are suited to slowly varying or high-resolution measurements where averaging and digital filtering are important. Because firmware determines calibration, gain, filtering, and conversion scheduling, the same silicon can support different meter configurations without changing the PCB.
Typical uses include single-phase electricity meters, utility data-acquisition equipment, portable industrial measurement instruments, energy-monitoring gateways, and low-power display products. In these systems, the MCU can sample analog channels, apply calibration and filtering, maintain metering state, update an LCD, and supervise a communications interface. A dedicated metering MCU is preferable when predictable low-power behavior and local display control are more important than the broader ecosystem of a general-purpose MCU.
Design the PCB around the 100-lead LQFP footprint and place the LCD, analog inputs, crystal circuitry, and decoupling according to the manufacturer datasheet. Keep sigma-delta analog traces away from fast-switching nodes, provide stable references, and verify startup, calibration, and low-power wake behavior across the complete temperature range. Allow sufficient board area around exposed thermal and power paths where the package design requires them.
This product page combines the exact orderable MPN, manufacturer device characteristics, package and memory information, sourcing guidance, and practical selection considerations. It also distinguishes verified drop-in candidates from functionally similar controllers, helping engineers assess replacement risk before committing a 100-lead mixed-signal design to production.
के लिए ड्रॉप-इन विकल्प MSP430F4784IPZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
MSP430F4783IPZ
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
MSP430F4793IPZ
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →MSP430F4784IPZ Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit single-phase metering microcontroller |
| CPU Architecture | 16-bit RISC |
| CPU Clock | 16 MHz |
| Register Width | 16 bit |
| Flash Memory | 48 KB |
| RAM | 2 KB |
| Sigma-Delta ADC Count | 4 channels |
| LCD Segment Support | 160 segments |
| Low-Power Modes | 5 modes |
| Maximum Operating Frequency | 16 MHz |
| पैकेज | 100-lead LQFP (PZ), 14 mm × 14 mm |
| पिन काउंट | 100 pins |
| माउंटिंग प्रकार | Surface mount |
| Temperature Grade | Industrial |
MSP430F4784IPZ 100-lead lqfp (pz), 14 mm × 14 mm पिन कॉन्फ़िगरेशन गाइड
MSP430F4784IPZ (100-lead lqfp (pz), 14 mm × 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: MSP430F4784IPZ.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
MSP430F4784IPZ के लिए उपयुक्त है 6 अनुप्रयोगs: Single-Phase Electricity Meters, Utility Data Acquisition, Portable Industrial Measurement, Energy Monitoring Gateways, Low-Power Sensor Terminals, Segment-Display Measurement Products.
Single-Phase Electricity Meters
The MSP430F4784IPZ fits single-phase metering designs because it combines four sigma-delta ADCs with a 16 MHz 16-bit RISC core in one 100-LQFP device. The MCU can acquire metering channels, perform digital filtering and calibration, store operating parameters in 48 KB of Flash, and use 2 KB of RAM for measurement state. Its 160-segment LCD capability simplifies local display integration while reducing the need for a separate display controller. For a production meter, confirm the ADC input ranges, gain structure, reference requirements, LCD segment mapping, and timing budget in the manufacturer datasheet.
अनुशंसित
Utility Data Acquisition
The MSP430F4784IPZ is suitable for utility data-acquisition equipment that must collect analog measurements while maintaining predictable low-power behavior. Four sigma-delta ADC channels provide dedicated acquisition resources, while the 16 MHz core can execute filtering, calibration, event logging, and communications tasks. The 48 KB Flash supports resident firmware and configuration data, and the 2 KB RAM supports active measurement buffers. Five low-power modes are especially useful in equipment that spends substantial time idle. Firmware should schedule conversions and peripheral activity carefully so battery and energy budgets are not undermined by continuous polling.
अनुशंसित
Portable Industrial Measurement
The MSP430F4784IPZ fits portable industrial instruments that combine analog measurement, local readout, and constrained power consumption. Its four sigma-delta channels support accurate acquisition of suitable sensor signals, and the 16-bit RISC CPU provides enough throughput for compensation, filtering, and instrument-state management. The integrated 160-segment LCD interface can drive a segment display directly, reducing board area and software complexity. The 100-LQFP package is relatively large for very compact products, so designers should confirm that the analog channels, display, and required I/O justify the pin count and footprint.
अनुशंसित
Energy Monitoring Gateways
The MSP430F4784IPZ can serve as the measurement and display controller in an energy-monitoring gateway when local metering precision is more important than adopting a general-purpose MCU. Four dedicated sigma-delta ADC channels allow multiple analog quantities to be acquired, while the 16 MHz processor handles compensation, threshold evaluation, data preparation, and interface supervision. Its 48 KB Flash and 2 KB RAM provide a compact firmware footprint for a dedicated embedded controller. Designers should confirm that the required network interface, data buffering, security requirements, and expansion I/O are provided externally without compromising the metering signal paths.
अनुशंसित
Low-Power Sensor Terminals
The MSP430F4784IPZ is appropriate for low-power sensor terminals that need flexible signal acquisition and a display in the same embedded controller. The four sigma-delta ADC channels can serve compatible sensor inputs, and the 16 MHz RISC core can perform scaling, filtering, threshold logic, and periodic reporting. Five low-power modes help the design reduce activity between measurement intervals. Because the LCD controller supports 160 segments, the same device can present local measurements without a separate display MCU. The final power budget should include analog settling, display refresh behavior, communications activity, and the leakage of every peripheral enabled during each duty cycle.
अनुशंसित
Segment-Display Measurement Products
The MSP430F4784IPZ fits segment-display products that combine live measurement with a local numeric or status display. Its 160-segment LCD support avoids a separate display driver in suitable designs, while four sigma-delta ADC channels support the measurement front end. The 16 MHz core can update the display, apply calibration, detect thresholds, and manage a communications or data-storage task from the same device. Layout engineers must follow the datasheet's LCD pin and segment constraints, and firmware should avoid unnecessary display activity where power consumption is important. The 100-LQFP package provides extensive I/O but requires sufficient PCB area for a 14 mm square footprint.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा MSP430F4784IPZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | MSP430F4783IPZ | MSP430F4793IPZ |
|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 100-LQFP (PZ), 14 mm × 14 mm | 100-LQFP | 100-LQFP |
मुख्य विशेषताएँ
- Integrated metering-oriented measurement resources (बनामMSP430F4783IPZ)
- Defined memory and processing configuration (बनामMSP430F4793IPZ)
- Purpose-built single-phase metering integration (बनामMSP430F4793IPZ)
डिज़ाइन नोट्स
Route the four sigma-delta measurement inputs as short, quiet analog traces and keep them away from switching regulator outputs, high-current load paths, and LCD drive transitions. Place input filtering and protection components close to their associated pins, while following the manufacturer pin-description table for the exact channel assignments. The 100-LQFP footprint provides many pins, but it does not remove the need to separate sensitive measurement paths from digital and power-return currents.
Define each operating mode explicitly in firmware and disable unused analog, LCD, communications, and timer resources before entering a low-power state. The device has five low-power modes, but the achieved energy savings depend on peripheral activity and the time spent awake. Measure the complete product rather than only the MCU supply because sensor circuits, display bias, and external interfaces may dominate the energy budget during sleep transitions.
Use the 100-lead LQFP PZ land pattern and follow the manufacturer's package drawing for solder mask, paste, and courtyard dimensions. Place decoupling capacitors adjacent to the intended supply pins, preserve the required via and return-current geometry, and check assembly clearances around all four package edges. Verify that the 14 mm square footprint fits the enclosure and that the LCD and analog connector placement supports short, controlled routing.
Do not infer pin compatibility from the shared 100-LQFP package alone. Before substituting MSP430F4783IPZ or MSP430F4793IPZ, compare every populated pin, alternate-function mapping, ADC channel assignment, LCD segment, supply limit, clock requirement, and firmware register difference. A PCB that physically accepts the replacement can still fail if a peripheral is remapped or a protection feature is absent.
अनुपालन जानकारी
The manufacturer information identifies the device as an industrial-grade 100-LQFP metering MCU but does not state the requested compliance classifications. Lead-free, halogen-free, conflict-minerals, RoHS, REACH, and AEC-Q100 status must be confirmed for the exact orderable MPN before qualification.