Texas Instruments

PCA9546ADT - 4-Channel I2C/SMBus Switch | Texas Instruments

MPN: PCA9546ADT ✓ सक्रिय
16-pin SOIC Package
न्यूनतम ऑर्डर मात्रा: 1 |

PCA9546ADT अवलोकन

The Texas Instruments PCA9546ADT is a 4-channel bidirectional I2C and SMBus translating switch with an active-low reset input, supplied in a 16-pin SOIC package. It fans one upstream SCL/SDA pair into four downstream channel pairs, provides three address pins for supporting up to eight devices on the I2C bus, and allows individual channels or channel combinations to be selected through programmable control registers.

An I2C switch is a bus-management interface integrated circuit used to route a shared serial bus to multiple peripherals while translating logic levels. The PCA9546ADT belongs to the I2C switch family, where bidirectional translating switches sit between a controller and downstream bus nodes. Its channel-selection architecture helps designers share bus wiring without requiring every target device to have a unique fixed address.

The principal features are four selectable downstream channels, I2C-bus and SMBus compatibility, three address pins, and an active-low reset input. Each downstream SCL and SD pair can be connected to the upstream bus under register control. All channels are deselected after power-up, giving the host controller a defined starting state before it configures the required downstream connection.

The device is controlled through the I2C bus itself. Its control-register interface determines which downstream channels are enabled, and the three address pins give the PCA9546A family flexibility when several switches share the same upstream bus. The bidirectional translating-switch architecture permits bus-side logic-level adaptation while preserving the clock-and-data organization used by I2C and SMBus systems.

Typical uses include sensor aggregation, industrial instrument interfaces, embedded control boards, test systems, and compact peripheral buses where four target devices need conditional access to one controller bus. The reset function can help a system return the switch to a known condition during initialization or fault recovery, while channel selection prevents unnecessary bus loading from unused downstream devices.

PCB design should keep the upstream and downstream SCL and SD routing compact and controlled. Confirm address-pin strapping, reset polarity, logic-level compatibility, and all downstream channel states in software before enabling production traffic. Review the manufacturer pin description and electrical tables to reproduce the exact footprint and termination strategy.

This page combines the PCA9546ADT interface description, verified distributor listings, packaging details, application guidance, and constrained replacement analysis. It focuses on engineering-relevant bus behavior, pin usage, reset handling, and PCB implementation rather than repeating only catalog-level identification data.

के लिए ड्रॉप-इन विकल्प PCA9546ADT — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PCA9546ADT (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Address Pins, Number of Channels, Package, RoHS Status, Reset Input.

NXP Semiconductors
Address Pins: A0, A1, A2 (8 selectable I2C addresses)
Number of Channels: 4 (SC0/SD0 to SC3/SD3)
Package: SOIC-16 (SO16, D suffix)
इसके साथ तुलना करें PCA9546ADT →
Texas Instruments
Address Pins: 3 (A0, A1, A2) - up to 8 devices on one I2C bus
Number of Channels: 4 (1-of-4 bidirectional translating switches)
Package: SOIC-16 (D suffix, 16-SOP)
इसके साथ तुलना करें PCA9546ADT →

PCA9546ADR

✅ ड्रॉप-इन
Texas Instruments
📦 16-pin SOIC
4-channel bidirectional I2C/SMBus switch · 4 (1-of-4 bidirectional translating switches) · I2C bus, SMBus compatible · 2.3 V to 5.5 V · 16 ohm (typical pass-gate, per distributor parametric data) · 3 (A0, A1, A2) - up to 8 devices on one I2C bus · Active-low RESET · All switch channels deselected

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCA9546AD

✅ ड्रॉप-इन
NXP Semiconductors
📦 16-pin SOIC
4-channel bidirectional I2C/SMBus translating switch · 4 (SC0/SD0 to SC3/SD3) · 2.3 V to 5.5 V · I2C-bus, SMBus · 400 kHz · Active-LOW RESET pin · Programmable control register (writable via I2C) · A0, A1, A2 (8 selectable I2C addresses)

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PCA9546ADT Maximum Ratings और Electrical Characteristics

Product Type 4-channel bidirectional I2C and SMBus translating switch
Number of Channels 4 channels
Upstream Bus Pairs 1 SCL/SDA pair
Downstream Bus Pairs 4 SC/SD pairs
Address Pins 3 address pins
Maximum Devices on I2C Bus 8 devices
Reset Input Active-low reset
Power-Up Channel State All switch channels deselected
Bus Compatibility I2C bus and SMBus compatible
Channel Selection Individual channel or channel combination via I2C control
Signal Direction Bidirectional
पैकेज 16-pin SOIC
Package Width 3.90 mm
माउंटिंग प्रकार Surface mount
RoHS स्थिति unknown
REACH Status unknown

PCA9546ADT 3.90 mm पिन कॉन्फ़िगरेशन गाइड

PCA9546ADT (3.90 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

PCA9546ADT के लिए 3.90 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCA9546ADT.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PCA9546ADT के लिए उपयुक्त है 6 अनुप्रयोगs: Multi-Sensor I2C Aggregation, Embedded Instrumentation Control, Industrial Peripheral Expansion, Test and Measurement Systems, Communications Equipment, Portable Consumer Device Expansion.

🧩

Multi-Sensor I2C Aggregation

The PCA9546ADT fits board designs that place several sensors behind a shared I2C bus. Its four downstream SC/SD channel pairs let the controller enable only the sensor group required for a measurement, while the three address pins support up to eight devices on the upstream bus. This arrangement helps avoid accidental contention between devices and reduces unnecessary loading from inactive channels. Firmware should start with all channels deselected, configure the required channel mask, and confirm each sensor's address before beginning acquisition.

🏭

Embedded Instrumentation Control

The PCA9546ADT is useful in embedded instrumentation systems where a processor must communicate with several converters, memory devices, or measurement peripherals over one I2C bus. Four independently selectable downstream pairs provide structured bus partitioning, and the active-low reset input lets the host restore a known switching state during initialization. Because the part powers up with all channels deselected, a deterministic startup sequence can be implemented before any peripheral is enabled. Confirm timing and logic-level requirements in the manufacturer electrical tables.

⚡

Industrial Peripheral Expansion

The PCA9546ADT supports industrial peripheral expansion by routing one upstream SCL/SDA connection to up to four downstream bus branches. Channel selection is controlled through I2C registers, allowing firmware to isolate traffic during updates, diagnostics, or fault recovery. The three hardware address pins help distinguish the switch from other bus-management devices, while the active-low reset provides a straightforward recovery control. In a control cabinet or test fixture, keep branch routing short and verify each branch for pull-ups, capacitance, and unintended bus connections.

🖥️

Test and Measurement Systems

The PCA9546ADT can organize test and measurement boards that connect several instruments, programmable components, or DUT interfaces to one controller. A selected channel can be activated only for its associated measurement, reducing bus complexity and helping maintain predictable communication. The reset function supports repeatable test initialization when a peripheral or downstream bus becomes stuck. For high-speed laboratory layouts, check the maximum supported clock rate, capacitance, and propagation-delay limits in the datasheet before finalizing trace lengths and pull-up networks.

🌐

Communications Equipment

The PCA9546ADT is appropriate for communications equipment that needs to share an I2C control bus among several low-speed peripheral sections. The upstream SCL/SDA pair fans out to four downstream SC/SD pairs, and programmable selection allows a baseband or network controller to access one section at a time. The 16-pin SOIC package supports conventional surface-mount assembly, and the three address pins permit multiple switch instances when more controlled bus segments are needed. Validate signal-integrity limits and logic thresholds for each attached device.

📱

Portable Consumer Device Expansion

The PCA9546ADT can extend a compact portable device's internal I2C bus to selected sensors, memory, or power-management peripherals. By enabling only the relevant downstream channel, the controller can reduce bus activity and isolate peripherals during a particular operating mode. The device's reset input supports controlled recovery after a power-management sequence, while its default deselected state helps prevent unintended startup communication. Board-level validation should include pull-up placement, battery-related rail transitions, and the complete downstream capacitance budget.

What is the PCA9546ADT datasheet PDF?
The PCA9546ADT datasheet is the manufacturer document describing its four-channel translating-switch operation, control registers, reset behavior, electrical characteristics, and package pin assignments. A directly linked PDF is available through the verified document URL on this page, while the product listing also identifies the device as a 16-pin SOIC translating-switch interface. Use the manufacturer PDF for final pin, voltage, timing, and footprint decisions before committing a PCB layout.
What is the operating voltage range of PCA9546ADT?
The PCA9546ADT operating voltage range requires confirmation from the manufacturer datasheet. The available part documentation identifies it as a four-channel I2C and SMBus translating switch with three address pins and an active-low reset, but the numerical supply limits are not stated in the verified product records. Consult the Electrical Characteristics and Recommended Operating Conditions tables before connecting upstream or downstream bus nodes, especially when level-shifting signals between systems with different logic voltages.
How many I2C channels does the PCA9546ADT have?
The PCA9546ADT provides four downstream I2C channels, with each channel represented by an SC/SD signal pair. The upstream SCL/SDA pair can therefore be routed to one selected downstream pair or a programmable combination of several pairs. This four-channel structure is useful when a controller must reach multiple sensors, memory devices, or interface adapters while avoiding a fixed address conflict between every connected peripheral.
What is the PCA9546ADT used for?
The PCA9546ADT is used to fan one upstream I2C or SMBus connection across four downstream channel pairs. Its programmable channel selection lets a controller connect only the intended downstream bus during a transaction, while three address pins permit up to eight devices on the I2C bus. Common uses include sensor aggregation, embedded instrumentation, industrial control boards, and peripheral expansion where fixed addressing would otherwise limit bus capacity.
How many devices can share the I2C bus with PCA9546ADT?
Up to eight devices can be supported on the I2C bus using the three address pins of the PCA9546A family. The channel-selection registers determine which of the four downstream SC/SD pairs are enabled, and the address pins identify the switch itself on the upstream bus. In a larger system, multiple switches can still be used, provided their address assignments and downstream channel usage remain unambiguous.
What happens when PCA9546ADT powers up?
The PCA9546ADT powers up with all switch channels deselected. This gives the controlling system a defined bus state before configuration begins and prevents unintended communication with downstream devices. Firmware should complete address recognition, reset handling, and channel-selection programming before attempting transactions on any downstream SC/SD pair, especially in systems where bus leakage or partial initialization could affect another peripheral.
Is the PCA9546ADT reset input active high or active low?
The PCA9546ADT reset input is active low. Asserting RESET places the switch into its reset condition, allowing a controller to return the device to a known state during initialization or recovery. The host must also preserve the required reset pulse width and input timing, which should be checked in the manufacturer timing tables before the signal is connected to a system reset controller.
What is the difference between PCA9546ADT and PCA9546ADR?
The PCA9546ADT and PCA9546ADR belong to the same PCA9546A four-channel I2C and SMBus switch family, and the verified comparison identifies their terminals and packages as consistent. Their core channel count of four and three-address-pin arrangement are unchanged, so the electrical interface proximity is 100%. Ordering and packing details should be confirmed for the specific assembly and production configuration before substitution.
Can PCA9546AD replace PCA9546ADT?
The PCA9546AD can be treated as a candidate replacement for the PCA9546ADT because the verified comparison states that the terminals and packages are consistent and that replacement does not require modification of the existing circuit. Both retain the four-channel I2C/SMBus switch architecture and three address pins. Production approval should still confirm temperature grade, marking, reel configuration, and ordering-code requirements for the intended BOM.
What can replace PCA9546ADT?
The closest documented replacement is the PCA9546ADR, followed by the PCA9546AD ordering variant, because both are identified as package- and terminal-consistent with the PCA9546ADT. Their four-channel topology, address-pin arrangement, reset function, and bus compatibility provide the closest drop-in path. Parts such as the PCA9543ADR or PCA9515ADR have different channel organizations and should not be treated as pin-compatible substitutes without a redesign.
Where can I buy PCA9546ADT online?
Use the Request a Quote form on this page to request PCA9546ADT availability, current pricing, and order quantities. The verified marketplace records confirm active listings for the exact Texas Instruments MPN, but they do not expose an explicit quantity-price table that can be reproduced as structured pricing. The quote request allows the exact suffix, package, and required quantity to be checked together.
What is the price of PCA9546ADT?
Use the Request a Quote form on this page for the current PCA9546ADT price and quantity breaks. The exact MPN is listed by multiple market channels, but the verified records do not contain qualifying explicit quantity-break prices, so no static price figure is stated here. Include the required order quantity and packaging preference with the request to receive a current quotation for the intended 16-SOIC configuration.
What is the lead time for PCA9546ADT?
Request the current PCA9546ADT lead time through the Request a Quote form on this page. The verified product records identify the part as an active Texas Instruments 16-SOIC device, but they do not state a reliable manufacturer lead-time commitment for the exact suffix. A quotation request can confirm available inventory, factory lead time, and any order multiples associated with the requested quantity.
Is PCA9546ADT in stock?
The Request a Quote form on this page is the appropriate way to check current PCA9546ADT stock and allocation for the exact ordering code. The verified listings indicate an active market for the device, but they do not provide a timestamped stock guarantee that would remain valid on the product page. Submit the required quantity and packaging details so stock can be confirmed against the current supply position.
What are the key specifications of PCA9546ADT that engineers should know?
The key PCA9546ADT specifications are four downstream I2C/SMBus channels, three address pins, support for up to eight devices on the bus, an active-low reset input, and a 16-pin SOIC package. The upstream SCL/SDA pair fans out to four SC/SD pairs, and any selected channel or combination can be controlled through the I2C control interface. All channels are deselected at power-up.
Where is the PCA9546ADT pinout?
The PCA9546ADT pinout is located in the manufacturer datasheet under the Pin Configuration and Pin Functions tables. The device is identified as a 16-pin SOIC, and the pin table should be used to assign upstream SCL/SDA, downstream SC0/SD0 through SC3/SD3, address pins, reset, ground, and supply connections. Use that table together with the package drawing before assigning PCB nets.

के लिए इंजीनियरिंग संदर्भ डेटा PCA9546ADT — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the PCA9546ADT when a controller must route one I2C or SMBus upstream pair among four downstream SC/SD channels and the design benefits from an active-low reset. Its three address pins support up to eight devices on the upstream bus, and the default deselected power-up state supports orderly initialization. The PCA9546ADR and PCA9546AD are the closest ordering-compatible alternatives because the documented package and terminal arrangements remain consistent; confirm the exact suffix and production packing before substitution. Do not select the PCA9543ADR or PCA9515ADR as drop-in replacements because their channel counts, buffer architectures, and pin assignments differ. For designs requiring another multiplex topology, more channels, different logic thresholds, or a package other than 16-pin SOIC, conduct a full pin and electrical review rather than treating the alternatives as direct replacements.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PCA9546ADR PCA9546AD
Package 16-pin SOIC 16-pin SOIC 16-pin SOIC
Brand Texas Instruments Texas Instruments Texas Instruments
Channel Count 4 channels 4 channels 4 channels
Address Pins 3 address pins 3 address pins 3 address pins
Maximum Bus Devices 8 devices 8 devices 8 devices
Reset Input Active-low reset Active-low reset Active-low reset
Power-Up State All channels deselected All channels deselected All channels deselected
Bus Compatibility I2C and SMBus compatible I2C and SMBus compatible I2C and SMBus compatible
Signal Direction Bidirectional Bidirectional Bidirectional

मुख्य विशेषताएँ

  • Complete four-channel control in one 16-pin SOIC (बनामPCA9543ADR)
  • Built-in active-low reset for deterministic recovery (बनामPCA9515ADR)
  • Three address pins support expandable bus topology (बनामPCA9546AD)

डिज़ाइन नोट्स

Place the upstream SCL/SDA pair and each downstream SC/SD pair according to the manufacturer's pinout and routing guidance. Keep traces short, avoid routing switching-power nodes beneath the bus, and place pull-up resistors where they can discharge the relevant bus capacitance without creating excessive parallel paths. Validate every downstream branch independently because enabling a channel connects the associated pair to the upstream bus.

Do not assume that two downstream channels can use the same fixed I2C address while both are enabled. Configure the address pins and channel-selection registers for a conflict-free map, and begin each power-up sequence with all channels deselected. Also verify reset polarity: RESET is active low, so using a high-asserted reset signal would prevent the intended recovery behavior.

Calculate the effective bus capacitance for the upstream path and every selected downstream branch before selecting pull-up strength. Account for the switch's on-resistance, connector capacitance, trace length, and pull-up resistor placement. The maximum supported clock frequency and timing limits must be taken from the manufacturer datasheet because they depend on the complete board configuration rather than the IC alone.

Keep the RESET and three address-pin strapping traces away from high-speed or high-current switching paths. Use a stable local ground reference and avoid long stubs on unused downstream pairs. Firmware should verify the programmed channel mask after reset, and the design should include a method for isolating a failed downstream branch if field diagnostics require fault containment.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The verified part descriptions do not provide explicit compliance statements for the exact PCA9546ADT ordering code. Confirm RoHS, REACH, halogen-free, and automotive qualification status in the manufacturer product documentation before qualification.

डेटा सत्यापन तिथि: 2026-11-10 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

pca9546a datasheet PCA9546ADT datasheet pdf PCA9546ADT pinout PCA9546ADT 16-SOIC footprint PCA9546ADT I2C multiplexer PCA9546ADT reset input PCA9546ADT channel selection PCA9546ADT application circuit PCA9546ADT equivalent PCA9546ADT replacement PCA9546ADT vs PCA9546ADR PCA9546ADT price Texas Instruments PCA9546ADT where to buy PCA9546ADT

संबंधित कंपोनेंट्स और शब्द

Texas Instruments PCA9546ADT PCA9546ADR PCA9546AD PCA9546A I2C switch SMBus switch bidirectional translating switch bus multiplexer interface IC semiconductor SCL SDA active-low reset channel selection address pins 16-pin SOIC SOIC family surface-mount package I2C bus SMBus sensor aggregation embedded instrumentation industrial control RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें