Texas Instruments

PCM5310PAP - 24-Bit 4/4 Audio Codec | Texas Instruments

MPN: PCM5310PAP ✓ सक्रिय
64-pin HTQFP (PAP), 10 x 10 mm Package
न्यूनतम ऑर्डर मात्रा: 1 |

PCM5310PAP अवलोकन

Texas Instruments PCM5310PAP is a 24-bit, 4-channel input and 4-channel output audio codec with a 2 Vrms driver, integrated headphone driver, and six audio interface ports in a 64-pin HTQFP package. The device supports sampling rates up to 96 kHz and 192 kHz, making it suitable for multichannel consumer, industrial, and communications audio systems.

An audio codec is an integrated circuit that converts digital audio data into analog signals and converts analog audio inputs back into digital data. The PCM5310 belongs to the broader signal-conversion hierarchy of audio interface ICs, mixed-signal semiconductors, and data-converter devices. Its four ADC channels, four DAC channels, headphone output circuitry, and digital audio interfaces consolidate multiple audio functions into one package.

Principal features include four analog input channels, four analog output channels, 24-bit audio resolution, operation through 96 kHz and 192 kHz sampling, a 2 Vrms driver, an integrated headphone driver, and six audio interface ports. The product listing identifies PCM5310PAP as a 64-pin HTQFP (PAP) package. These capabilities make the codec useful where an embedded system requires bidirectional audio conversion rather than a dedicated input-only or output-only converter.

The PCM5310 supports both serial and I2C-oriented control or interface arrangements as reflected in its product classification. Its multichannel architecture can reduce the number of separate converters required in audio equipment, while the integrated headphone driver can simplify designs that need local headphone output. The exposed thermal pad in the PAP package supports heat transfer through the PCB when the device operates at elevated ambient temperature or with sustained analog output activity.

Typical uses include multichannel audio equipment, headphone-equipped consumer products, industrial audio terminals, communication consoles, soundbar platforms, and other systems requiring synchronized recording and playback. It can also sit between an application processor and analog microphones, line-level sources, amplifiers, and headphones. System partitioning should account for the codec's four input and four output channels, required analog support components, digital interface wiring, and exposed-pad thermal design.

For implementation, follow the manufacturer datasheet for the exact pin assignments, exposed-pad connection, recommended decoupling, analog layout, and digital interface configuration. Keep analog input and output traces short, separate from high-current digital paths, and use a continuous ground reference plane where practical. Treat exposed-pad soldering and thermal verification as part of PCB qualification rather than optional manufacturing details.

This product page combines the official device description, package information, technical-source links, structured specifications, engineering guidance, and verified cross-reference information. It is intended to accelerate codec selection and PCB planning while directing engineers to the manufacturer datasheet for authoritative implementation details.

के लिए ड्रॉप-इन विकल्प PCM5310PAP — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

PCM5310PAPR

✅ ड्रॉप-इन
📦 64-pin HTQFP (PAP), 10 x 10 mm
Same 64-pin HTQFP footprint and principal codec parameters; PAP uses tray packaging while PAPR uses tape-and-reel packaging.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PCM5310PAP Maximum Ratings और Electrical Characteristics

Device Type 4-channel input / 4-channel output audio codec
Audio Resolution 24 bit
सैंपलिंग रेट 96 kHz and 192 kHz
ADC Channels 4 channels
DAC Channels 4 channels
Driver Output 2 Vrms
Headphone Driver Integrated
Audio Interface Ports 6 ports
Digital Interface I2C and serial
Signal Processing Asynchronous audio conversion
पैकेज 64-pin HTQFP (PAP), 10 x 10 mm
Terminal Count 64 terminals
Package Shape Square
Terminal Form Gull wing
Exposed Thermal Pad Present
माउंटिंग प्रकार Surface mount

PCM5310PAP square पिन कॉन्फ़िगरेशन गाइड

PCM5310PAP (square पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

PCM5310PAP के लिए square पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PCM5310PAP.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PCM5310PAP के लिए उपयुक्त है 6 अनुप्रयोगs: Multichannel Audio Console, Headphone-Equipped Consumer Device, Industrial Audio Terminal, Communication and Voice System, Soundbar and Home Audio, Professional Audio Interface.

🎧

Multichannel Audio Console

PCM5310PAP fits a multichannel console that records and plays back four analog audio channels through a common codec. Its four ADC inputs and four DAC outputs provide symmetrical channel counts, while 24-bit conversion supports high-resolution capture and playback. The six audio interface ports give the system designer several ways to connect digital audio paths within the device architecture. In implementation, route analog inputs through the recommended anti-aliasing network, keep converter clocks clean, and verify channel mapping through the TI register configuration procedure. The exposed pad should be tied to the manufacturer-specified ground and thermal-via structure.

📱

Headphone-Equipped Consumer Device

PCM5310PAP is suitable for consumer products that combine microphone or line-level capture with headphone playback. The integrated headphone driver reduces the number of external amplification stages required for a local headphone output, while the 2 Vrms driver supports the output architecture described by TI. Four capture and playback channels can serve mixed-source products that need more than a basic mono codec. The design must still account for output impedance, headphone loading, analog gain settings, and safe connect or disconnect behavior according to the manufacturer application guidance.

🏭

Industrial Audio Terminal

PCM5310PAP can consolidate analog input and output handling in an industrial audio terminal where several audio channels must cross between sensors, communication equipment, and local monitoring. Its four ADC channels support multiple analog sources, while four DAC channels provide playback or line-level drive paths. The 96 kHz and 192 kHz sampling options accommodate higher-rate audio designs, although clocking and interface bandwidth must be verified. Robust implementation should provide clean analog grounding, controlled power sequencing, and an exposed-pad copper pattern that supports sustained operation in elevated ambient temperatures.

🌐

Communication and Voice System

PCM5310PAP is appropriate for communication equipment that requires local audio capture, monitoring, and playback rather than only a narrow digital interface. Four analog inputs can accommodate microphone or line sources, and the integrated headphone driver can support monitoring or headset output. The codec's multichannel capability allows designers to share one conversion device across voice, alert, and auxiliary audio paths. Designers should maintain separate analog and digital return paths, use low-noise supplies, and confirm the serial interface timing against the host processor to prevent framing errors during simultaneous recording and playback.

🔊

Soundbar and Home Audio

PCM5310PAP can serve as the central audio codec in a soundbar or home-audio product requiring multiple local inputs and playback channels. Its four-channel ADC section handles source capture, while the four-channel DAC section supports multichannel output stages; the integrated headphone driver can also provide a local headphone connection where needed. With 24-bit resolution and sampling through 192 kHz, the codec addresses high-resolution audio pathways. A successful design depends on precise clock generation, balanced grounding around analog pins, channel-map verification, and careful isolation between microphone inputs and power-amplifier outputs.

🎚️

Professional Audio Interface

PCM5310PAP is suitable for compact professional or semiprofessional audio interfaces that require multiple analog channels, digital connectivity, and local headphone monitoring. The four ADC and four DAC channels allow one conversion component to handle multiple synchronized sources and outputs, while the six interface ports support flexible system interconnection. The 2 Vrms output driver and integrated headphone driver can simplify analog output planning. Production validation should cover full-scale headroom, distortion at the intended load, digital clock jitter, startup sequencing, and thermal performance across the expected ambient-temperature range.

अनुशंसित उत्पादों का सारांश

PCM5310PAPR Same codec in tape-and-reel ordering format उपयोग में: Multichannel Audio Console, Headphone-Equipped Consumer Device, Industrial Audio Terminal, Communication and Voice System, Soundbar and Home Audio, Professional Audio Interface PCM5142PWR Texas Instruments उपयोग में: Multichannel Audio Console, Headphone-Equipped Consumer Device, Industrial Audio Terminal, Communication and Voice System, Soundbar and Home Audio, Professional Audio Interface
What is PCM5310PAP?
PCM5310PAP is a Texas Instruments 24-bit audio codec with four input channels, four output channels, a 2 Vrms driver, an integrated headphone driver, and six audio interface ports. According to the TI product page, the device supports 96 kHz and 192 kHz sampling and is packaged as a 64-pin HTQFP in the PAP ordering configuration. It is intended for systems that combine analog audio capture and playback in one mixed-signal device.
What are the key specifications of PCM5310PAP that engineers should know?
PCM5310PAP provides four ADC channels, four DAC channels, 24-bit conversion, 96 kHz and 192 kHz sampling, and six audio interface ports. TI describes it as a 4-channel input and 4-channel output codec with a 2 Vrms driver and integrated headphone driver. The device uses a 64-pin HTQFP (PAP) package measuring 10 x 10 mm and supports I2C and serial digital interfaces, making it a consolidated audio conversion solution for multichannel equipment.
Where can I download the PCM5310PAP datasheet PDF?
The official PCM5310PAP datasheet can be located through the Texas Instruments PCM5310 product page at https://www.ti.com/product/PCM5310. The manufacturer page provides the technical documentation, ordering information, product parameters, and package details for PCM5310PAP. Use the PCM5310PAP orderable entry at https://www.ti.com/product/PCM5310/part-details/PCM5310PAP when confirming the exact 64-pin HTQFP ordering configuration.
Where is the PCM5310PAP pinout and package information?
The PCM5310PAP pinout is documented on the Texas Instruments PCM5310 product page and in the linked manufacturer datasheet. The verified ordering information identifies a 64-pin HTQFP (PAP) package with 64 terminals, gull-wing leads, a square 10 x 10 mm body, and an exposed pad. Assign every net from the datasheet pin-description table rather than inferring connections from the package drawing alone, especially for power, ground, and exposed-pad pins.
Is PCM5310PAP suitable for multichannel audio recording and playback?
Yes, PCM5310PAP is designed for simultaneous multichannel audio recording and playback. Its four analog input channels, four analog output channels, and 24-bit operation provide the channel count needed by console, soundbar, communication-terminal, and embedded-audio designs. The 96 kHz and 192 kHz sampling capability also supports higher-rate audio workflows, subject to the clocking, interface, and analog design requirements in the manufacturer datasheet.
What can replace PCM5310PAP?
PCM5310PAPR is the verified same-footprint ordering option for PCM5310PAP, with consistent terminals, package, and principal performance characteristics according to the available cross-reference record. The distinguishing ordering difference is the packaging format: PCM5310PAP is listed as a tray package, while PCM5310PAPR is listed as tape-and-reel. Confirm reel orientation, moisture handling, and production-line feeding requirements before treating the alternate ordering code as a procurement substitution.
Is PCM5310PAP the same as PCM5310PAPR?
PCM5310PAP and PCM5310PAPR use the same 64-pin HTQFP audio-codec package and are described as having consistent terminals and principal performance characteristics. Their ordering codes indicate different delivery formats: PCM5310PAP is associated with a tray, while PCM5310PAPR is associated with tape-and-reel. The electrical and pin-level substitution is supported, but the assembly packaging must match the PCB assembly process.
PCM5310PAP vs PCM5310PAPR: which is better for production?
PCM5310PAP is the better choice for a production line equipped for tray-fed components, while PCM5310PAPR is the better choice for automated tape-and-reel assembly. The cross-reference information identifies compatible terminals and consistent package characteristics, so the decision is primarily operational rather than functional. Review the manufacturer's ordering table for exact reel or tray dimensions, moisture-sensitivity requirements, and packing quantities before finalizing the production BOM.
When should I choose PCM5310PAP over PCM5310PAPR?
Choose PCM5310PAP when the assembly process accepts components supplied in trays and the product is sourced in the PAP ordering configuration. Choose PCM5310PAPR when continuous reel-fed assembly, automated pick-and-place feeding, or standard reel inventory management is required. Because the parts share the same pin-level package and core codec function, the choice should follow component-handling requirements rather than an assumed change in audio performance.
Where can I buy PCM5310PAP online and check its lead time?
Use the Request a Quote form on this page to request PCM5310PAP availability, current lead time, minimum order quantity, and the applicable delivery format. The manufacturer identifies PCM5310PAP as a 4-channel input and 4-channel output audio codec in a 64-pin HTQFP (PAP) package. A firm production commitment should reflect the selected package, quantity, and assembly-feeding method.
How much does PCM5310PAP cost?
Current PCM5310PAP pricing is not displayed as a fixed figure on this page. Use the Request a Quote form to request the unit price and quantity schedule for the exact PCM5310PAP ordering code, including its tray packaging. This keeps the commercial response aligned with the requested quantity and delivery format rather than presenting a potentially stale catalog amount as a current offer.
Is PCM5310PAP in stock and what is the lead time?
PCM5310PAP availability and lead time should be confirmed through the Request a Quote form on this page. Submit the required quantity, tray or reel handling preference, and target production date so the supplier can respond with a meaningful schedule. The part is identified by TI as PCM5310PAP in the 64-pin HTQFP (PAP) package, and the quote request should preserve that exact ordering code.
How does PCM5310PAP differ from a discrete ADC and DAC design?
PCM5310PAP integrates four ADC channels, four DAC channels, a 2 Vrms driver, an integrated headphone driver, and six audio interface ports into one 64-pin HTQFP device. A discrete ADC-and-DAC implementation would generally require separate converters, additional routing, and more board-level interconnection. The integrated codec reduces component count, but its multiplexed audio, clocking, and analog-support requirements still demand careful PCB planning.
What design constraints matter for the PCM5310PAP exposed pad?
The PCM5310PAP package includes an exposed thermal pad, so the PCB must implement the pad connection and thermal-via pattern specified by the manufacturer. Provide uninterrupted copper beneath the device where the footprint permits, add thermal vias according to the recommended land pattern, and maintain a low-impedance ground return. Validate junction-temperature and soldering-process requirements during hardware qualification rather than treating the pad as an optional mechanical feature.
Is PCM5310PAP compliant with RoHS and REACH?
The RoHS and REACH status of PCM5310PAP should be confirmed from the current manufacturer product documentation or declaration associated with the ordered device. A compliance declaration published for PCM5310PAPR should not automatically be transferred to PCM5310PAP without checking the exact orderable part number. Request the compliance record through the quote form and retain it with the production documentation.

के लिए इंजीनियरिंग संदर्भ डेटा PCM5310PAP — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose PCM5310PAP when the product uses the Texas Instruments PCM5310 codec and its assembly process accepts tray-fed components. Its four ADC channels, four DAC channels, 24-bit conversion, 96 kHz and 192 kHz sampling, 2 Vrms driver, integrated headphone driver, and six audio interface ports support multichannel recording and playback systems. Choose PCM5310PAPR when the same electrical design is required in a tape-and-reel production format; its cross-reference record indicates consistent terminals, package, and principal performance characteristics. The decisive difference is therefore component handling rather than audio functionality. Before substitution, confirm exact reel dimensions, moisture requirements, orientation, feeder compatibility, and the current manufacturer ordering table. For any alternative family beyond PCM5310PAPR, require documented pin-by-pin compatibility, equivalent channel counts, matching clock and interface capabilities, acceptable analog performance, and a qualified exposed-pad layout before considering it a drop-in replacement.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PCM5310PAPR
Brand Texas Instruments Texas Instruments
Package 64-pin HTQFP (PAP), 10 x 10 mm 64-pin HTQFP (PAP), 10 x 10 mm
Device Type 4-channel input / 4-channel output audio codec 4-channel input / 4-channel output audio codec
Audio Resolution 24 bit 24 bit
Sampling Rate 96 kHz and 192 kHz 96 kHz and 192 kHz
Driver Output 2 Vrms 2 Vrms
Headphone Driver Integrated Integrated
Audio Interface Ports 6 ports 6 ports
Digital Interface I2C and serial I2C and serial
Delivery Format Tray Tape and reel

मुख्य विशेषताएँ

  • Consolidates multichannel conversion and headphone drive (बनामPCM5310PAPR)
  • Supports six audio interface ports in one codec (बनामPCM5310PAPR)
  • Provides a 2 Vrms driver with four DAC channels (बनामPCM5310PAPR)

डिज़ाइन नोट्स

Treat the exposed pad as both an electrical connection and a thermal path. Follow the manufacturer land pattern for the ground connection and thermal vias, preserve uninterrupted PCB copper beneath the package, and avoid placing a keepout that isolates the pad from the main ground plane. Validate the final assembly under maximum expected channel activity and ambient temperature because output loading and supply-to-output voltage headroom influence heat dissipation.

Separate analog input, analog output, digital interface, and clock routing into distinct functional regions while maintaining a continuous low-impedance ground reference. Keep input and output analog traces short, avoid routing them beneath digital clock lines, and place their support components close to the associated pins. Use the datasheet reference layout to determine component order and placement because the physical sequence of support components can materially affect analog performance.

Do not treat PCM5310PAP and PCM5310PAPR as interchangeable without checking the physical delivery format. The electrical footprint is compatible, but PAP is identified with tray packaging and PAPR with tape-and-reel packaging. Confirm tape dimensions, reel capacity, component orientation, moisture handling, and feeder compatibility with the assembler before releasing the BOM. Also avoid assigning analog pins from a generic 64-pin drawing; use the exact manufacturer pin-description table.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

No compliance declaration for the exact PCM5310PAP ordering code was identified in the cited product and cross-reference records. Confirm current compliance documents with Texas Instruments before production release.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

PCM5310PAP datasheet PCM5310PAP pinout PCM5310PAP datasheet pdf PCM5310PAP specifications Texas Instruments PCM5310PAP PCM5310PAP 64 pin HTQFP PCM5310PAP 24 bit audio codec PCM5310PAP 2 Vrms driver PCM5310PAP equivalent PCM5310PAP replacement PCM5310PAP vs PCM5310PAPR PCM5310PAP price PCM5310PAP buy online PCM5310PAP lead time PCM5310PAP headphone driver application

संबंधित कंपोनेंट्स और शब्द

Texas Instruments PCM5310PAP PCM5310PAPR PCM5142PWR audio codec audio interface IC mixed-signal semiconductor ADC DAC 24-bit audio conversion 96 kHz sampling 192 kHz sampling 2 Vrms driver integrated headphone driver I2C serial audio interface 64-pin HTQFP PAP package exposed thermal pad surface mount multichannel audio industrial audio RoHS REACH
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें