PIC24FV32KA301-I/SS - 32MHz XLP 16-Bit MCU | Microchip
MPN: PIC24FV32KA301-I/SS ✓ सक्रियPIC24FV32KA301-I/SS अवलोकन
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals into one component. A 16-bit MCU such as the PIC24FV32KA301 handles control logic, sensor measurement, communication, and timing in a compact embedded system. Its hierarchy extends from 16-bit PIC RISC core to 16-bit microcontroller, embedded controller, and semiconductor.
Key features include the 32 MHz operating speed, 32 KB Flash memory, 2 KB RAM, 512-byte EEPROM, 12-bit ADC, CTMU, and 17 I/O ports. The XLP feature set is designed for applications where average power consumption matters as much as processing capability. The industrial-temperature ordering code identifies the -I/SS configuration, while the manufacturer lists the device as active.
The PIC24 architecture combines a 16-bit instruction set with dedicated peripherals for timing, data capture, analog measurement, and low-power control. Flash memory retains the programmed application without a separate nonvolatile memory device, while RAM supports working variables and EEPROM preserves small amounts of configuration or calibration data. The 12-bit ADC and CTMU are useful when a design must acquire analog measurements without relying entirely on discrete analog components.
Typical applications include battery-powered sensor nodes, compact industrial controllers, low-power data loggers, building-automation endpoints, and portable measurement instruments. The 20-pin SSOP keeps the footprint manageable for products where board area is constrained, while the 17 I/O pins provide connections for sensors, switches, indicators, and serial interfaces.
When designing around this MCU, verify the operating voltage and temperature requirements for the complete system, and use the pin-description table in the manufacturer datasheet when assigning PCB tracks. Decoupling and clock-layout guidance in the datasheet should be followed early in layout because a 32 MHz design margin is usually more efficient than correcting signal-integrity problems after assembly.
This page combines the manufacturer product description, distributor specifications, lifecycle information, package details, drop-in family alternatives, and practical design guidance to support component selection and PCB planning.
के लिए ड्रॉप-इन विकल्प PIC24FV32KA301-I/SS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PIC24FV32KA301-I/SS (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Core Architecture, Operating Temperature, CTMU, RoHS Status.
PIC24FV32KA102-I/SS
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PIC24FV32KA201-I/SS
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PIC24FV32KA202-I/SS
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PIC24FV32KA203-I/SS
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PIC24FV32KA204-I/SS
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
PIC24FV32KA301-I/SS Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit RISC flash microcontroller |
| Maximum Clock Speed | 32 MHz |
| Flash Program Memory | 32 KB (11K x 24 words) |
| RAM Memory | 2 KB |
| EEPROM Data Memory | 512 bytes |
| ADC Resolution | 12 bits |
| CTMU | Present |
| General-Purpose I/O | 17 ports |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Nominal Supply Ratings | 2.5 V / 3.3 V / 5 V device listings |
| Program Memory Type | Flash |
| Core Architecture | 16-bit PIC RISC |
| Low-Power Technology | XLP eXtreme Low Power |
| Deep-Sleep Peripherals | DSBOR, DSWDT, and RTCC |
| पैकेज | 20-pin SSOP, 0.300 inch lead pitch |
| Package Material | Lead-free plastic |
| Packaging Format | Tube |
| Lifecycle Stage | Active |
| RoHS स्थिति | RoHS compliant |
PIC24FV32KA301-I/SS lead-free plastic पिन कॉन्फ़िगरेशन गाइड
PIC24FV32KA301-I/SS (lead-free plastic पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PIC24FV32KA301-I/SS.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
PIC24FV32KA301-I/SS के लिए उपयुक्त है 6 अनुप्रयोगs: Battery-Powered Sensor Node, Compact Industrial Control Module, Low-Power Data Logger, Building Automation Endpoint, Portable Measurement Instrument, Capacitive Touch and Analog Interface.
Battery-Powered Sensor Node
The PIC24FV32KA301-I/SS fits a battery-powered sensor node because its XLP architecture and Deep Sleep-capable DSBOR, DSWDT, and RTCC peripherals support duty-cycled operation. A 32 MHz core can handle sensor conditioning, local filtering, and packet preparation between long inactive periods. The 12-bit ADC supports analog sensing, while CTMU can simplify capacitance-based touch or level measurements. With 32 KB of Flash, 2 KB of RAM, and 512 bytes of EEPROM, the device has room for application firmware, working buffers, and persistent configuration. Place the MCU in the center of the low-power design so that the analog front end and radio interface can be switched off independently.
अनुशंसित
Compact Industrial Control Module
The PIC24FV32KA301-I/SS is appropriate for a compact industrial control module that coordinates digital inputs, analog measurements, indicators, and actuator commands. Its 17 I/O ports leave sufficient connections for switches, relays, status LEDs, and a host interface, while the 12-bit ADC supports sensor inputs. The 32 MHz maximum clock rate provides headroom for control-loop execution and communication routines. Its 20-pin SSOP package limits board footprint, making it useful in distributed control boxes where every saved millimeter matters. Design the decoupling and clock routing according to the manufacturer guidance, and separate noisy switching stages from the analog input region to preserve measurement quality.
अनुशंसित
Low-Power Data Logger
A wearable or handheld data logger can use the PIC24FV32KA301-I/SS to acquire periodic measurements, store operational state, and manage a low-duty-cycle operating profile. The 12-bit ADC handles sensor conversion, the CTMU supports capacitance-based input measurements, and 512 bytes of EEPROM can retain counters or calibration data between sessions. The 32 KB Flash capacity accommodates firmware and logging control logic, while the XLP peripherals allow the controller to remain inactive between samples. Firmware should use the DSWDT and RTCC capabilities to establish deterministic wake periods. Choose the exact operating voltage and temperature limits from the manufacturer datasheet before defining the battery-life target for the finished product.
अनुशंसित
Building Automation Endpoint
The PIC24FV32KA301-I/SS works in a building-automation endpoint that monitors environmental conditions and controls lighting, HVAC inputs, or occupancy-related functions. Its 17 I/O ports support digital sensors and output stages, and its 12-bit ADC can read analog temperature, humidity, or air-quality transducers. The MCU can remain in a low-power state between updates and use the RTCC and Deep Sleep peripherals to schedule activity. The 32 MHz clock capability allows local logic and protocol handling to share one device. Keep analog traces short, place input filtering near the connector, and follow the manufacturer pin-description table to maintain a serviceable and reworkable board.
अनुशंसित
Portable Measurement Instrument
A portable measurement instrument can use the PIC24FV32KA301-I/SS to combine analog acquisition, touch or control inputs, data processing, and status indication in a single 20-pin SSOP. The 12-bit ADC provides a practical resolution for many sensor signals, while CTMU supports capacitive controls that reduce the need for discrete switch hardware. Thirty-two kilobytes of Flash holds control and calibration routines, 2 KB of RAM supports measurement buffers, and EEPROM can retain setup values. Because the MCU also offers XLP low-power features, an instrument can reduce consumption between operator interactions. Validate the ADC input range, reference arrangement, and analog ground strategy against the manufacturer electrical-characteristics tables.
अनुशंसित
Capacitive Touch and Analog Interface
The PIC24FV32KA301-I/SS suits a compact analog-and-touch interface because it combines a 12-bit ADC with CTMU and provides 17 I/O ports for shared control signals. CTMU can support capacitive sensing functions, allowing a product to replace separate mechanical switches with a sealed front panel while keeping the controller and measurement circuitry together. The 32 MHz processor can service periodic scans and convert results into control or communication data. The 20-pin SSOP footprint helps limit board area in wearables, appliance controls, and compact user interfaces. Use the manufacturer CTMU application guidance for electrode layout, acquisition timing, and noise avoidance, and validate touch performance in the assembled enclosure.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा PIC24FV32KA301-I/SS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | PIC24FV32KA102-I/SS | PIC24FV32KA201-I/SS | PIC24FV32KA202-I/SS | PIC24FV32KA203-I/SS | PIC24FV32KA204-I/SS |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
| Maximum Clock Speed | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
मुख्य विशेषताएँ
- The specified KA301 resource combination combines 32 MHz performance, 32 KB Flash, 2 KB RAM, and 512-byte EEPROM (बनामPIC24FV32KA102-I/SS)
- The 20-pin SSOP implementation supports a compact board while retaining 17 general-purpose I/O ports (बनामPIC24FV32KA202-I/SS)
- Analog and capacitive measurement resources are specified directly for this ordering code (बनामPIC24FV32KA203-I/SS)
- The XLP configuration explicitly identifies Deep Sleep-capable DSBOR, DSWDT, and RTCC operation (बनामPIC24FV32KA204-I/SS)
डिज़ाइन नोट्स
Design the firmware around the XLP low-power modes rather than treating Deep Sleep as an optional firmware feature. Use the DSWDT and RTCC capabilities to define periodic wake events, and confirm the wake-state timing and required peripheral clocks in the manufacturer datasheet. Place the device so that unused I/O can remain configured without preventing the board from entering its intended low-current state.
Follow the manufacturer placement and decoupling guidance for the 20-pin SSOP. Position the supply bypass capacitors close to the device power pins, keep the clock path compact, and route high-current switching outputs away from the 12-bit ADC input area. The 0.300-inch lead pitch requires adequate assembly clearances, and the final land pattern should be checked against the official package drawing rather than a generic SSOP footprint.
Use the 32 MHz clock rating as a board-level design constraint, even when the application runs at a lower frequency. Avoid routing the oscillator signal beside analog inputs, and evaluate clock-source configuration and startup behavior against the electrical-characteristics tables. For CTMU measurements, provide clean sensor electrodes and follow the recommended acquisition approach, since surrounding switching circuitry can influence capacitance readings.
Do not treat the 5 V device listing as permission to operate the supply pin at 5 V. The stated supply-voltage range is 1.8 V to 3.6 V, and certain I/O structures may also have different maximum levels. Verify each pin's electrical limits, the ADC reference, and the brown-out configuration in the datasheet before connecting external signals or designing level-shifting circuits.
अनुपालन जानकारी
The product listing identifies the package as lead-free plastic and RoHS compliant. No additional REACH, halogen-free, conflict-minerals, or automotive-qualification statement was identified for this ordering code.
