PIC24HJ32GP204-E/ML - 16-bit 40 MIPS MCU | Microchip
MPN: PIC24HJ32GP204-E/ML ✓ सक्रियPIC24HJ32GP204-E/ML अवलोकन
A PIC24H microcontroller is a high-performance 16-bit embedded controller built around a Harvard architecture and a wide peripheral set. Relative to the broader hierarchy of embedded processing, the PIC24H family sits between general-purpose 8-bit microcontrollers and more complex 32-bit application processors. The PIC24HJ32GP204 is especially suited to applications involving high-speed, repetitive computations, real-time control, communications, and mixed-signal peripheral integration.
Key features of the PIC24HJ32GP204 include 32 KB of Flash organized as 11K x 24 words, 2 KB of SRAM, and execution capability up to 40 MIPS. Three 16-bit timer/counter modules can be paired to provide 32-bit timing functions, while two output-capture channels support event measurement. The family is designed around a powerful 16-bit core and retains pin compatibility with devices in the dsPIC33F family, which can simplify the reuse of application software and board-level concepts.
Technical operation centers on the PIC24H 16-bit core and its integrated analog and timing resources. The 40 MHz operating point provides a substantial instruction-throughput ceiling for motor-control loops, data acquisition, protocol handling, and supervisory tasks. Flash memory supports in-system programming, while SRAM provides working memory for control algorithms, buffers, and stacks. As a member of the PIC24HJ32GP202/204 and dsPIC24HJ16GP304 device group, the controller is documented under Microchip data sheet 70289J.
Typical applications include industrial motor and position control, industrial automation modules, digital power conversion, communications equipment, and mixed-signal embedded instruments. The 44-QFN 8 x 8 mm package supports space-constrained boards where component density is important, while its 40 MIPS performance allows more control-loop work to remain local to the microcontroller.
The primary design consideration is the exposed thermal pad and the short high-frequency decoupling path required by a 40 MHz embedded controller. Place the supply bypass capacitors close to their associated power pins, connect the exposed pad to the intended ground plane using the manufacturer land pattern, and keep analog and digital return paths controlled to limit switching noise.
This product record combines the verified manufacturer specifications, package information, source links, engineering-use guidance, and a pin-compatible same-family alternative. It is intended to support component selection, PCB planning, firmware scoping, and lifecycle review before Microchip data sheet 70289J and the PIC24H reference documentation are consulted in detail.
के लिए ड्रॉप-इन विकल्प PIC24HJ32GP204-E/ML — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PIC24HJ32GP204-E/ML (समान फॉर्म फैक्टर और फुटप्रिंट).
PIC24HJ32GP204-I/ML
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →PIC24HJ32GP204-E/ML Maximum Ratings और Electrical Characteristics
| Microcontroller Type | 16-bit PIC24H microcontroller |
| Maximum Clock Speed | 40 MHz |
| Maximum Instruction Throughput | 40 MIPS |
| Program Memory | 32 KB Flash (11K x 24) |
| Data Memory | 2 KB SRAM |
| Supply Voltage Range | 3.0 V to 3.6 V |
| Timer/Counter Modules | 3 x 16-bit timer/counter |
| Paired Timer Resolution | 32-bit when two timers are paired |
| Output Capture Channels | 2 |
| I/O Count | 21 I/O ports |
| Package Type | 44-lead QFN |
| Package Dimensions | 8 x 8 mm |
| माउंटिंग प्रकार | Surface mount |
| लाइफसाइकिल स्थिति | Active |
PIC24HJ32GP204-E/ML 8 x 8 mm पिन कॉन्फ़िगरेशन गाइड
PIC24HJ32GP204-E/ML (8 x 8 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PIC24HJ32GP204-E/ML.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
PIC24HJ32GP204-E/ML के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Motor Control, Digital Power Conversion, Industrial Automation and Data Acquisition, Communications Equipment, Test and Measurement Instruments, Embedded Control and Monitoring Modules.
Industrial Motor Control
The PIC24HJ32GP204-E/ML fits compact motor-control systems because its 40 MIPS throughput leaves computational headroom for position, speed, and current-control loops. Three 16-bit timer/counter modules provide timing resources, and two can be paired for a 32-bit timing function; two output-capture channels can capture external events for position feedback. Its 44-QFN, 8 x 8 mm package also allows the controller to be placed close to power-conversion circuitry, reducing control-loop wiring length. The key design constraint is clean partitioning of analog power-current feedback from the 40 MHz digital circuitry, supported by short supply bypass paths and careful grounding of the exposed pad.
अनुशंसित
Digital Power Conversion
The PIC24HJ32GP204-E/ML is appropriate for digital power-conversion controllers that require deterministic timing and more computation than an 8-bit MCU typically provides. Up to 40 MIPS supports compensation calculations, fault-state management, and supervisory logic, while the timer/counter resources can support switching timing and fault detection. The 3.0 V to 3.6 V operating range aligns with many digitally controlled converter architectures, although the complete regulator operating point must remain inside the device ratings. Layout should keep the controller away from high-dV/dt switching nodes and use the manufacturer QFN land pattern to provide a low-impedance thermal and return path.
अनुशंसित
Industrial Automation and Data Acquisition
The PIC24HJ32GP204-E/ML can serve as the supervisory controller in industrial automation equipment where acquisition, protocol handling, and control logic must coexist on a compact board. Its 40 MIPS performance supports fast interrupt servicing and repetitive computation, while 32 KB of Flash holds application code and 2 KB of SRAM accommodates working buffers and protocol state. The 44-QFN package reduces board area compared with larger leaded packages, making it useful in distributed controller modules. Designers should budget SRAM carefully for acquisition buffers and use the two output-capture channels only when their event timing requirements align with the target application.
अनुशंसित
Communications Equipment
The PIC24HJ32GP204-E/ML is suitable for embedded communications equipment that needs a compact 16-bit controller for framing, buffer management, and real-time supervisory functions. At up to 40 MIPS, the device can service multiple interrupts and perform protocol processing concurrently with background tasks. Its 32 KB Flash capacity accommodates moderate application firmware, and 2 KB of SRAM is appropriate for short packet buffers, state machines, and stacks rather than large continuous-data storage. For robust implementation, assign peripheral functions and interrupt priorities early, keep high-current transceiver supplies separated from sensitive routing, and validate signal-integrity margins against the actual communication standard.
अनुशंसित
Test and Measurement Instruments
The PIC24HJ32GP204-E/ML can support compact measurement instruments that combine timing-sensitive acquisition with a user interface or data-processing function. Its three timer/counter modules allow multiple independent timing or counting operations, and pairing two modules provides a 32-bit timing function for longer measurement intervals. The 40 MIPS ceiling supports filtering and calculation without relying entirely on an external processor. The 8 x 8 mm QFN package helps reduce instrument size, but analog isolation remains essential: separate sensitive input routing from digital clocks, use a quiet reference strategy, and keep exposed-pad current flow consistent with the manufacturer's thermal design guidance.
अनुशंसित
Embedded Control and Monitoring Modules
The PIC24HJ32GP204-E/ML is well matched to compact embedded modules that monitor sensors and execute local control decisions. The 16-bit architecture and 40 MIPS throughput provide efficient arithmetic for filtering, thresholds, and state machines, while the timer and output-capture peripherals support periodic measurement and event capture. Its 32 KB Flash and 2 KB SRAM balance firmware capacity against a small package footprint, making it practical for space-constrained modules. Designers should use the 21 available I/O ports according to the exact package pin table and avoid assigning functions solely from the base family name, because package-specific multiplexing and exposed-pad requirements determine the final PCB implementation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा PIC24HJ32GP204-E/ML — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | PIC24HJ32GP204-I/ML |
|---|---|---|
| Package | 44-QFN (8 x 8 mm) | 44-QFN (8 x 8 mm) |
| Brand | Microchip Technology | Microchip Technology |
| Architecture | 16-bit PIC24H | 16-bit PIC24H |
| Maximum Clock Speed | 40 MHz | 40 MHz |
| Maximum Throughput | 40 MIPS | 40 MIPS |
| Program Memory | 32 KB Flash (11K x 24) | 32 KB Flash (11K x 24) |
| Data Memory | 2 KB SRAM | 2 KB SRAM |
| Supply Voltage Range | 3.0 V to 3.6 V | 3.0 V to 3.6 V |
| Timer/Counter Modules | 3 x 16-bit | 3 x 16-bit |
| Output Capture Channels | 2 | 2 |
| Temperature Grade | -E grade | -I grade |
मुख्य विशेषताएँ
- Higher clock throughput within the same 44-QFN footprint (बनामPIC24HJ32GP204-I/ML)
- Target ordering configuration for standard industrial-temperature operation (बनामPIC24HJ32GP204-I/ML)
- Integration of three timing resources and two output-capture channels (बनामPIC24HJ32GP204-I/ML)
डिज़ाइन नोट्स
Use the exact 44-QFN 8 x 8 mm land pattern from Microchip data sheet 70289J, including the exposed-pad geometry and paste mask. Place the 3.0 V to 3.6 V supply bypass components immediately beside the associated power pins, with the shortest possible loop between each capacitor and the package. The controller's 40 MHz operating speed makes supply-impedance and return-path discontinuities more significant than they would be in a low-frequency controller. Confirm pad, mask, and stencil dimensions against the current package drawing before releasing artwork.
The exposed pad is an essential thermal and electrical-land feature rather than an optional area. Connect it according to the manufacturer package guidance and provide a continuous low-impedance copper path into the ground or thermal plane, while observing any separation requirements for analog and power-return routing. Do not estimate junction temperature from ambient temperature alone; evaluate total device dissipation, package thermal resistance, copper area, airflow, and the maximum ambient condition of the final system.
Separate clock, high-speed control, and analog-sensing routes where possible, and keep the 40 MHz system away from sensitive measurement inputs and switching-power nodes. Use continuous reference planes where the topology permits it, avoid crossing noisy return currents beneath signal paths, and place bulk and high-frequency bypass capacitance according to the regulator and device recommendations. Because the device includes only 2 KB of SRAM, buffer sizing also belongs in the early timing and memory-budget review rather than being deferred until firmware integration.
अनुपालन जानकारी
The verified product information confirms an active lifecycle status but does not state RoHS, REACH, lead-free, halogen-free, or conflict-minerals compliance. AEC-Q100 is not applicable because the verified information does not identify this device as an automotive-qualified variant.