R5F10FLEANA#U0 - 32MHz 16-bit RL78 MCU | Renesas
MPN: R5F10FLEANA#U0 ✓ सक्रियR5F10FLEANA#U0 अवलोकन
A microcontroller is a programmable semiconductor that integrates a CPU core, memory, peripheral interfaces, and control logic on one package. Within the embedded-control hierarchy, the RL78/G1E MCU belongs to the Renesas RL78 family and is designed for compact embedded systems that require deterministic operation, low-voltage operation, and integrated program and data memory.
Principal features of the R5F10FLEANA#U0 include a 32 MHz maximum operating frequency, a 16-bit CPU architecture, 64 KB of flash program memory, and 4 KB of RAM. Its 1.6 V minimum operating voltage supports low-voltage embedded designs. A 64-lead HWQFN package provides a 9 mm by 9 mm footprint, while the -40 °C to +85 °C rating supports industrial temperature environments.
The RL78 architecture is designed for embedded applications in which compact code, efficient execution, and integrated memory are important. With 64 KB of flash, the MCU provides space for application firmware, configuration data, and supporting routines. The operating-frequency and memory combination should be evaluated against the selected peripheral set, interrupt requirements, and real-time control workload before finalizing a system design.
Typical application areas include industrial control modules, compact sensor interfaces, building equipment, appliance controllers, low-voltage embedded systems, and communication equipment. For each design, confirm that the required timers, serial interfaces, analog functions, pin multiplexing, and operating limits are supported by the exact device variant before schematic capture.
PCB implementation requires attention to the exposed-pad and thermal-layout requirements of the 64-lead HWQFN package. Place input and output decoupling capacitors close to their assigned pins, preserve the manufacturer-recommended land pattern, and route high-current or sensitive signals away from switching nodes. Review the pin-description table in the manufacturer datasheet when assigning every signal and power pin.
This product record combines the exact R5F10FLEANA#U0 identity, core electrical specifications, package information, sourcing guidance, cross-reference results, and practical design considerations. It also distinguishes documented drop-in alternatives from family members or alternate packaging codes that have not been proven equivalent for PCB replacement.
के लिए ड्रॉप-इन विकल्प R5F10FLEANA#U0 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस उत्पाद के लिए कोई drop-in alternatives उपलब्ध नहीं।
विकल्प अनुरोध करेंR5F10FLEANA#U0 Maximum Ratings और Electrical Characteristics
| Product Type | 16-bit microcontroller (MCU) |
| Manufacturer | Renesas Electronics Corporation |
| Series | RL78/G1E |
| CPU Architecture | 16-bit RL78 |
| Maximum Operating Frequency | 32 MHz |
| Program Memory | 64 KB flash |
| Data Memory | 4 KB RAM |
| ऑपरेटिंग सप्लाई वोल्टेज | 1.6 V to 5.5 V |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +85 °C |
| पैकेज | 64-lead HWQFN, 9 mm × 9 mm |
| Package Family | HWQFN surface-mount package |
| पिन काउंट | 64 pins |
| माउंटिंग प्रकार | Surface mount |
| RoHS स्थिति | Compliant |
R5F10FLEANA#U0 hwqfn surface-mount package पिन कॉन्फ़िगरेशन गाइड
R5F10FLEANA#U0 (hwqfn surface-mount package पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: R5F10FLEANA#U0.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
R5F10FLEANA#U0 के लिए उपयुक्त है 6 अनुप्रयोगs: Compact Industrial Controller, Low-Voltage Sensor Interface, Appliance Control Module, Building Equipment Interface, Communication Equipment Controller, Low-Voltage Embedded System.
Compact Industrial Controller
The R5F10FLEANA#U0 fits compact industrial controller designs that need a 32 MHz 16-bit MCU, 64 KB of flash, and 4 KB of RAM on a single 9 mm × 9 mm device. Place the MCU at the center of the controller and connect the selected timer channels to actuators while using the documented serial interface for sensors or a supervisory controller. Its -40 °C to +85 °C operating range supports industrial-temperature equipment. Before schematic release, verify that the required timers, communication channels, analog inputs, and pin multiplexing exist in the datasheet, and provide local decoupling and a stable 1.6 V to 5.5 V supply.
अनुशंसित
Low-Voltage Sensor Interface
The R5F10FLEANA#U0 can serve as the acquisition and processing MCU in a low-voltage sensor interface when 64 KB of flash and 4 KB of RAM are sufficient. Its 16-bit RL78/G1E architecture operates at up to 32 MHz, allowing sensor readings to be filtered, conditioned, and prepared for a serial uplink. The 1.6 V minimum operating voltage supports compact battery-powered designs. Check the exact ADC or comparator resources, measurement accuracy, timer channels, and serial interface before selecting it. Keep sensitive analog traces short, place the reference and bypass components according to the datasheet, and isolate switching circuitry from the sensing section.
अनुशंसित
Appliance Control Module
The R5F10FLEANA#U0 is appropriate for appliance and equipment controllers that require deterministic embedded control within a compact package. Its 32 MHz maximum operating frequency, 64 KB flash, and 4 KB RAM provide a defined resource envelope for motor sequencing, user-interface coordination, and supervisory logic. The 64-lead HWQFN body measures only 9 mm × 9 mm, allowing placement near the controlled power stage, while the -40 °C to +85 °C range supports demanding ambient conditions. Confirm required motor-control outputs, encoder inputs, communications, and protection functions in the datasheet. Keep high-current switching paths separate from MCU traces and follow the exposed-pad thermal layout.
अनुशंसित
Building Equipment Interface
The R5F10FLEANA#U0 can serve as a protocol and I/O management MCU in building-equipment controllers, provided its documented peripherals satisfy the interface requirements. Its 32 MHz 16-bit RL78 core can execute communications and control tasks within the 64 KB flash and 4 KB RAM budget, while its 1.6 V to 5.5 V range supports multiple embedded supply architectures. The 64-lead 9 mm × 9 mm HWQFN package simplifies compact board integration. Validate the needed UART, SPI, I2C, timer, and pin-multiplexing functions before schematic release. Use isolated or protected communication circuitry where the equipment interface leaves the controller board.
अनुशंसित
Communication Equipment Controller
The R5F10FLEANA#U0 is suitable as an embedded supervisory controller in communication equipment when the system fits its 64 KB flash, 4 KB RAM, and 32 MHz operating envelope. The MCU can coordinate configuration, status monitoring, and data framing around the communication interface specified by the design. Its 1.6 V to 5.5 V operating range provides flexibility across compact supply rails, and the 64-lead HWQFN package supports dense, multifunction boards. Confirm the exact serial interface, data rates, timer resources, and interrupt requirements in the datasheet. Apply controlled-impedance routing where signals are sensitive and separate transceiver supplies from digital return paths.
अनुशंसित
Low-Voltage Embedded System
The R5F10FLEANA#U0 fits low-voltage embedded systems requiring a compact 16-bit controller rather than a larger general-purpose processor. Its 1.6 V to 5.5 V operating range, 32 MHz maximum clock, and 64 KB flash allocation make it practical for embedded monitors, configurable controllers, and compact peripheral nodes with bounded workloads. The 4 KB RAM requirement must be checked carefully against buffers, stack depth, and communication buffers. Confirm pin multiplexing and peripheral availability for the chosen functions, maintain local decoupling at the supply pins, and follow the manufacturer footprint for the 64-lead HWQFN. Firmware changes should remain within the documented memory and clock limits.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा R5F10FLEANA#U0 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद |
|---|---|
| Manufacturer | Renesas Electronics |
| Package | 64-lead HWQFN, 9 mm × 9 mm |
| CPU Architecture | 16-bit RL78/G1E |
| Maximum Frequency | 32 MHz |
| Program Memory | 64 KB flash |
| Data Memory | 4 KB RAM |
| Operating Voltage | 1.6 V to 5.5 V |
| Operating Temperature | -40 °C to +85 °C |
| RoHS Status | Compliant |
डिज़ाइन नोट्स
Use the exact 64-lead HWQFN land pattern and exposed-pad geometry shown in the manufacturer package drawing. The MCU body is 9 mm × 9 mm, but body size alone does not define a valid footprint. Place all decoupling capacitors close to their intended power pins, provide a short return path for high-frequency current, and inspect the assembly courtyard before placing surrounding components.
Design the supply for the documented 1.6 V to 5.5 V operating range, including startup and transient conditions. The MCU may be used in low-voltage systems, but external I/O levels, pull-ups, and attached peripherals must also match the selected rail. Check each power pin's connection and bypass requirement in the datasheet rather than assuming that a single capacitor serves every supply domain.
Treat the exposed pad as both a package connection and a thermal path. Follow the datasheet's exposed-pad connection instructions, retain maximum copper where the layout rules permit, and minimize thermal discontinuities beneath the device. Validate junction temperature using the actual board construction and enclosure because airflow, copper area, and neighboring heat sources determine the final operating temperature.
Do not substitute an RL78 device merely because it has the same core family or a 64-pin count. Confirm every physical pin, alternate function, supply domain, timer channel, serial interface, and exposed-pad connection against the R5F10FLEANA datasheet. Firmware, startup configuration, clock settings, and peripheral mapping must also be reviewed before a candidate is approved as a replacement.
अनुपालन जानकारी
The product listing identifies the R5F10FLEANA#U0 as RoHS compliant. No additional compliance claims are made for REACH, AEC-Q100, lead-free status, halogen-free status, or conflict-minerals requirements.
