STM32F779IIT6 - 216MHz Cortex-M7 MCU | STMicroelectronics
MPN: STM32F779IIT6 ✓ सक्रियSTM32F779IIT6 अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals into one device. The Arm Cortex-M7 core belongs to the 32-bit RISC processor hierarchy and combines high-performance floating-point-oriented control with a broad embedded peripheral set. Within the STM32 family, the STM32F7 series targets high-performance applications requiring more processing capacity and memory than entry-level embedded MCUs.
The STM32F779IIT6 includes 2 MB of internal flash for program storage and 512 KB of SRAM for working memory. Its stated operating frequency is 216 MHz, while its 12-bit ADC capability supports industrial measurement and control functions. The 176-pin LQFP-176 package provides 132 GPIO, making the device suitable for systems that need extensive parallel connectivity for sensors, actuators, human-interface interfaces, communications, and external memory.
Technical differentiation comes from the combination of Cortex-M7 performance, substantial embedded memory, and a large pin count in a 24 mm by 24 mm surface-mount package. Because the MCU combines extensive peripherals and external-interface options, designers should plan power, clock, decoupling, and signal-integrity implementation around the manufacturer pin-description table and application guidance. The operating range of 1.7 V to 3.6 V supports standard embedded supply arrangements, while the -40°C to +85°C rating covers industrial temperature environments.
Typical applications include industrial automation controllers, data-acquisition systems, networked machine controls, motion-control platforms, audio and digital signal processing equipment, and connected test instruments. The 512 KB SRAM can accommodate data buffers and real-time workloads, while 2 MB of flash provides room for application firmware, libraries, boot code, and configuration data. The 132 GPIO count is particularly valuable when a design must retain numerous discrete digital interfaces.
A key design consideration is that a 176-pin device requires careful PCB routing and a deliberate escape strategy from high-pin-count fine-pitch LQFP geometry. Place decoupling capacitors at the appropriate power pins, keep switching and sensitive analog paths separated, and validate clock, memory, and communications interfaces against the manufacturer reference design. Firmware and peripheral configurations should also be checked for every pin assigned in the board schematic.
This product page combines manufacturer specifications, package information, sourcing guidance, drop-in family alternatives, and practical design notes to help engineers evaluate the STM32F779IIT6 for high-performance embedded control designs.
के लिए ड्रॉप-इन विकल्प STM32F779IIT6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं STM32F779IIT6 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type.
STM32F777IIT6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →STM32F778IIT6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32F779IIT6 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit Microcontroller |
| Processor Core | Arm Cortex-M7 |
| Maximum Operating Frequency | 216 MHz |
| Flash Memory | 2 MB (2M x 8) |
| SRAM | 512 KB |
| Architecture | 32-bit RISC |
| Operating Voltage Range | 1.7 V to 3.6 V |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| GPIO Count | 132 |
| पैकेज | LQFP-176 (24 mm x 24 mm) |
| माउंटिंग प्रकार | Surface Mount |
| ऑपरेटिंग तापमान रेंज | -40°C to +85°C |
| Digital Signal Processing Support | High-performance and DSP FPU |
| External Memory Interface | Dual mode Quad-SPI |
| RoHS स्थिति | Compliant |
| Maximum Total GPIO | 132 |
| Core Variant | Arm Cortex-M7F |
STM32F779IIT6 lqfp-176 (24 mm x 24 mm) पिन कॉन्फ़िगरेशन गाइड
STM32F779IIT6 (lqfp-176 (24 mm x 24 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32F779IIT6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32F779IIT6 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Industrial Data Acquisition, Motion Control Platform, Digital Signal Processing Equipment, Connected Test and Measurement, Networked Embedded Control Node.
Industrial Automation Controller
The STM32F779IIT6 fits an industrial automation controller because its 216 MHz Arm Cortex-M7 core provides real-time processing headroom, while 512 KB of SRAM supports control buffers and communication state. Its 132 GPIO can connect limit switches, encoders, discrete outputs, and operator-interface signals without requiring multiple expansion devices. The 1.7 V to 3.6 V operating range and -40°C to +85°C rating suit conventional industrial equipment. For motor, machine, or safety functions, verify timer features, I/O current limits, isolation requirements, and fault-handling behavior in the exact device documentation.
अनुशंसित
Industrial Data Acquisition
The STM32F779IIT6 is well suited to a multi-channel industrial data-acquisition unit because it combines a 216 MHz processor with a 12-bit ADC and 132 GPIO. Firmware can sample, filter, timestamp, and transfer data while external sensors and converters occupy the abundant GPIO. Its 512 KB SRAM provides useful working space for sample buffers and protocol state, and 2 MB of flash supports acquisition software and calibration tables. The analog design must still account for input range, source impedance, sampling time, reference stability, and analog-to-digital interference around the high-pin-count package.
अनुशंसित
Motion Control Platform
The STM32F779IIT6 can serve as the central controller in a precision motion-control platform because its 216 MHz Cortex-M7 core supports responsive control-loop computation and its 512 KB SRAM accommodates motion state and buffered commands. The 132 GPIO leaves ample capacity for encoder interfaces, pulse-width modulation outputs, limit inputs, communications, and digital feedback. Firmware should use the device's relevant timer and DMA resources, while the hardware layout should preserve clean return paths and separation between switching outputs and sensitive encoder signals.
अनुशंसित
Digital Signal Processing Equipment
The STM32F779IIT6 is applicable to embedded digital signal processing equipment requiring a 216 MHz Cortex-M7 core, 2 MB of flash, and 512 KB of SRAM. Those resources allow filter routines, sampling buffers, communication stacks, and control functions to coexist within one device. The high-performance DSP and FPU positioning supports computationally intensive workloads, but actual throughput depends on the selected instructions, memory architecture, cache behavior, and peripheral configuration. Benchmark the real signal chain and retain the required memory margin for operating-system and safety functions.
अनुशंसित
Connected Test and Measurement
The STM32F779IIT6 fits connected test and measurement equipment that needs substantial firmware storage, deterministic control, and many external connections. Its 2 MB flash can hold application code, instrument drivers, calibration data, and communication components, while 512 KB SRAM supports acquisition buffers and protocol state. The 132 GPIO can connect displays, buttons, relay drivers, trigger lines, and external converters. For high-accuracy analog measurements, the ADC and reference characteristics must be evaluated independently of the digital processing capability.
अनुशंसित
Networked Embedded Control Node
The STM32F779IIT6 is appropriate for a networked embedded-control node that combines local real-time processing with external communications. The Cortex-M7 operating at up to 216 MHz can handle protocol processing and application tasks, 512 KB of SRAM accommodates active connections and protocol buffers, and 132 GPIO supports local sensors and actuators. The choice of communications interface, isolation, and connector strategy depends on the product environment. Firmware and security requirements should also be validated against the exact STM32F779 device configuration before production release.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32F779IIT6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | STM32F777IIT6 | STM32F778IIT6 |
|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | LQFP-176 (24 mm x 24 mm) | LQFP-176 (24 mm x 24 mm) | LQFP-176 (24 mm x 24 mm) |
| Processor Core | Arm Cortex-M7F | Arm Cortex-M7F | Arm Cortex-M7F |
| Maximum Operating Frequency | 216 MHz | 216 MHz | 216 MHz |
मुख्य विशेषताएँ
- High-performance processing with extensive onboard memory (बनामSTM32F777IIT6)
- Large 132-GPIO interface in a standardized 176-pin package (बनामSTM32F778IIT6)
- Industrial temperature operation with a 1.7 V to 3.6 V supply range (बनामSTM32F777IIT6)
डिज़ाइन नोट्स
The LQFP-176 package has a 24 mm by 24 mm body and requires a deliberate fanout strategy between the fine-pitch device and the system board. Assign every physical pin in the CAD library, including all power, ground, reset, boot, clock, and debug functions. Place the required decoupling capacitors close to their associated supply pins and follow the manufacturer reference layout for high-current paths, exposed return connections, and test-point access.
Design the 1.7 V to 3.6 V power tree around the manufacturer's core and peripheral supply requirements rather than applying one generic regulator output to every rail. Separate noisy digital activity from sensitive analog paths, provide local bulk energy near the MCU, and verify startup sequencing against the device's documented power-up constraints. Review absolute maximum ratings and I/O behavior during reset before selecting downstream interface components.
The 216 MHz operating capability makes clock and high-speed interface routing sensitive to return-path continuity. Use a continuous ground plane, minimize stub branches, control impedance according to the selected interface standard, and keep switching nodes away from analog inputs. Validate timing margins with the actual clock configuration, trace topology, connector loading, and peripheral settings instead of relying only on nominal clock frequency.
Do not substitute an STM32F7 device solely because it uses the same LQFP-176 footprint. Confirm the exact memory configuration, GPIO mapping, peripheral set, electrical limits, package drawing, temperature grade, and firmware target in the manufacturer documentation. Create and validate a device-level comparison for each production substitution, including startup behavior, bootloader support, clock tree, pin multiplexing, and any code that depends on an STM32F779-specific peripheral.
अनुपालन जानकारी
RoHS status is identified by the technical listing for the exact device. Separate REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals declarations were not established from the available product information.