STM32L073V8T6 - 32MHz Ultra-Low-Power MCU | STMicroelectronics
MPN: STM32L073V8T6 ✓ सक्रियSTM32L073V8T6 अवलोकन
A microcontroller, or MCU, integrates a processor core, memory, peripherals, and interface logic into one semiconductor package. The STM32L0 Series belongs to the broader embedded-controller hierarchy: MCU -> 32-bit microcontroller -> Arm Cortex-M0+ microcontroller -> ultra-low-power embedded MCU. This integration lets a product combine application processing, sensor measurement, communications, and power management without requiring several separate devices.
Key features include 64 KB of Flash, a 12-bit ADC with hardware oversampling, two DAC channels, two ultra-low-power comparators, USB 2.0 crystal-less connectivity, an LCD interface, and a real-time clock. The timing resources include four general-purpose 16-bit timers, two basic timers, one low-power timer, and SysTick. Two watchdogs support reliable system supervision, while the RTC provides timekeeping for low-power data-logging and sensor applications.
The Cortex-M0+ core uses a compact instruction set designed for cost- and power-conscious embedded control. Its 32 MHz operating limit is suitable for control loops, communication management, human-interface input processing, and low-to-moderate data-rate sensor systems. The analog peripherals reduce the need for external components when the design uses internal ADC or DAC functions, while crystal-less USB can simplify USB clock implementation in suitable device designs.
Typical applications include USB-connected data loggers, compact industrial sensors, battery-powered environmental monitors, medical measurement modules, wearable accessories, and LCD-equipped control panels. The STM32L073V8T6 is particularly relevant when low standby consumption, mixed analog and digital sensing, and USB connectivity must coexist in a single 100-lead package.
PCB design should preserve the LQFP-100 footprint and route USB, analog, clock, and power pins according to the manufacturer pinout and layout guidance. Confirm the selected crystal, decoupling network, USB transceiver, and programming interface against the current manufacturer datasheet before layout release, especially when low-power performance is a primary design target.
This page consolidates the confirmed core specifications, package information, application guidance, engineering considerations, and verified same-family drop-in options. It also distinguishes confirmed connectivity and analog features from parameters that require direct verification in the manufacturer datasheet.
के लिए ड्रॉप-इन विकल्प STM32L073V8T6 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
STM32L073VBT6
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L071V8T6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L081V8T6
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
STM32L073V8T6 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit ultra-low-power microcontroller (MCU) |
| Processor Core | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz |
| Architecture | 32-bit RISC |
| Flash Memory | 64 KB (64K x 8) |
| USB Interface | USB 2.0 crystal-less |
| ADC Resolution | 12-bit |
| ADC Hardware Oversampling | Supported |
| DAC Channels | 2 |
| Ultra-Low-Power Comparators | 2 |
| General-Purpose Timers | 4 x 16-bit |
| Basic Timers | 2 |
| Low-Power Timer | 1 LPTIM |
| Real-Time Clock | 1 RTC |
| Watchdogs | 2 |
| पैकेज | 100-lead LQFP, 14 x 14 mm |
| माउंटिंग प्रकार | Surface mount |
STM32L073V8T6 100-lead lqfp, 14 x 14 mm पिन कॉन्फ़िगरेशन गाइड
STM32L073V8T6 (100-lead lqfp, 14 x 14 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: STM32L073V8T6.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
STM32L073V8T6 के लिए उपयुक्त है 6 अनुप्रयोगs: USB-C Connected Environmental Sensor, Industrial Data Logger, Battery-Powered Wearable Monitor, Medical Measurement Module, LCD-Equipped Control Panel, USB Service and Configuration Interface.
USB-C Connected Environmental Sensor
The STM32L073V8T6 fits a compact environmental sensor because it combines a 32 MHz Cortex-M0+ core with a 12-bit ADC, hardware oversampling, crystal-less USB 2.0, and low-power peripherals in one device. A sensor front end can feed analog measurements into the ADC while firmware applies calibration and filtering. The crystal-less USB feature can reduce clock-related implementation complexity in suitable designs. Two DAC channels can also generate an excitation or calibration signal when the measurement circuit requires it. The 64 KB of Flash is appropriate for compact control firmware, a USB stack, calibration tables, and data buffering. Battery-operated operation benefits from the STM32L0 low-power architecture, LPTIM, RTC, and watchdogs, although final run time depends on sampling frequency, sensor duty cycle, USB activity, and the selected sleep mode.
अनुशंसित
Industrial Data Logger
The STM32L073V8T6 suits an industrial data logger that must capture periodic sensor readings, maintain timestamps, and transfer results through USB. Its RTC supports timekeeping during low-power operation, while the four general-purpose 16-bit timers and the LPTIM provide flexible timing bases for sampling and communication intervals. The 12-bit ADC with hardware oversampling can support connected pressure, temperature, or level sensors whose outputs fall within the device's specified input limits. Two comparators can perform threshold detection for alarms or direct sensor-limit functions. The 64 KB Flash footprint constrains complex buffering or large protocol stacks, so firmware should use compact buffering and appropriate storage partitioning. USB 2.0 crystal-less connectivity provides a practical path for configuration and data transfer while preserving the same MCU package as the analog and timing resources.
अनुशंसित
Battery-Powered Wearable Monitor
The STM32L073V8T6 can serve as the control MCU in a wearable monitor where low standby consumption and compact integration are important. The Arm Cortex-M0+ core provides 32-bit processing for sensor fusion, event filtering, and a compact user interface, while the two ultra-low-power comparators can monitor thresholds without requiring frequent CPU intervention. The LPTIM and RTC provide low-power timing functions useful for periodic sampling and time-stamping. Its 12-bit ADC with hardware oversampling is valuable for battery-powered measurements where reducing quantization noise can improve signal quality. The 100-lead LQFP package offers many peripheral and communication assignments, but it is larger than subcompact packages used in miniaturized wearables. Board partitioning, antenna placement, and the choice between always-on and periodic sensing therefore have a direct effect on both size and battery life.
अनुशंसित
Medical Measurement Module
The STM32L073V8T6 is applicable to a compact medical measurement module that digitizes low-bandwidth analog signals and manages sensor data near the acquisition point. The 12-bit ADC with hardware oversampling can improve effective measurement resolution, while two DAC channels provide controllable analog outputs for stimulus generation, biasing, or test functions. Two comparators support independent limit detection, and the RTC can provide event timestamps. The ultra-low-power STM32L0 architecture is useful in portable instruments that spend substantial time between measurements. Medical-system designers must still define the analog front end, input protection, isolation requirements, calibration method, and applicable safety and regulatory requirements; the MCU itself does not establish medical certification. The 64 KB of Flash is well suited to compact acquisition firmware but requires careful allocation for communications, algorithms, and logging buffers.
अनुशंसित
LCD-Equipped Control Panel
The STM32L073V8T6 fits an LCD-equipped control panel because it integrates an LCD interface, a 32 MHz Cortex-M0+ core, timers, ADC, DAC channels, and USB connectivity. The general-purpose timers can drive display-related timing or control outputs, while the ADC can read operator-interface or process-status analog signals. Two DAC channels can support analog setpoints or test functions, and the comparators can implement configurable limit alarms. The 64 KB Flash capacity favors a focused control interface with compact graphics and local logic rather than a graphics-intensive panel. USB crystal-less connectivity can support configuration transfer, diagnostics, or data export without dedicating additional serial-interface logic to the host. Firmware must confirm the selected LCD panel's interface and timing requirements against the manufacturer documentation, while PCB layout should isolate sensitive analog routing from display and switching circuitry.
अनुशंसित
USB Service and Configuration Interface
The STM32L073V8T6 can be used as the central MCU in a USB-connected service interface for an embedded product. Its crystal-less USB 2.0 capability, 32 MHz Cortex-M0+ core, and 64 KB of Flash are suitable for command processing, configuration storage, diagnostics, and firmware update workflows where the exact USB implementation is supported by the selected board design. Timers and the RTC can support periodic maintenance tasks or time-stamped diagnostic records, while the ADC and comparators can monitor internal or external health signals. The MCU should be selected only after the required USB class, host or device role, bus-power limits, and firmware stack have been verified in the manufacturer documentation. This architecture reduces component count compared with a separate USB interface controller, but software development, enumeration behavior, and ESD protection remain important engineering considerations.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा STM32L073V8T6 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | STM32L073VBT6 | STM32L071V8T6 | STM32L081V8T6 |
|---|---|---|---|---|
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Package | 100-lead LQFP (14 x 14 mm) | 100-lead LQFP (14 x 14 mm) | 100-lead LQFP (14 x 14 mm) | 100-lead LQFP (14 x 14 mm) |
| Processor Core | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ | Arm Cortex-M0+ |
| Maximum CPU Frequency | 32 MHz | 32 MHz | 32 MHz | 32 MHz |
| Flash Memory | 64 KB | 64 KB | 64 KB | 64 KB |
| USB 2.0 Crystal-Less Connectivity | Supported | Supported | Not supported | Supported |
| ADC | One 12-bit ADC with hardware oversampling | One 12-bit ADC with hardware oversampling | One 12-bit ADC with hardware oversampling | One 12-bit ADC with hardware oversampling |
| DAC Channels | 2 | 2 | 2 | 2 |
| Ultra-Low-Power Comparators | 2 | 2 | 2 | 2 |
| General-Purpose Timers | 4 x 16-bit | 4 x 16-bit | 4 x 16-bit | 4 x 16-bit |
| RTC and Watchdogs | 1 RTC and 2 watchdogs | 1 RTC and 2 watchdogs | 1 RTC and 2 watchdogs | 1 RTC and 2 watchdogs |
मुख्य विशेषताएँ
- Integrated crystal-less USB connectivity (बनामSTM32L071V8T6)
- Directly matched STM32L073 family option (बनामSTM32L081V8T6)
- Comprehensive low-power timing and supervision (बनामSTM32L073VBT6)
- Mixed-signal integration (बनामSTM32L071V8T6)
डिज़ाइन नोट्स
Use the STMicroelectronics LQFP-100 land pattern and pin-1 orientation marking, and place all decoupling capacitors as close as practical to their associated power and ground pins. Separate sensitive analog inputs from digital and USB routing where the board area permits. Do not infer pin functions from the package drawing alone; assign every net from the manufacturer pin-description table because alternate-function multiplexing can affect otherwise familiar pins.
Plan the power tree around the exact supply limits, analog operating modes, USB bus-power requirements, and peripheral current stated in the manufacturer datasheet. For a battery-powered design, calculate the average current from active acquisition time, USB-connected time, RTC retention, watchdog operation, and sleep-mode current rather than using the CPU frequency alone. Confirm that the regulator can source peak peripheral current without causing supply droop that corrupts ADC readings or disrupts USB communication.
Treat the 12-bit ADC, DAC outputs, comparators, and USB interface as separate layout domains. Use short analog traces, quiet reference routing, and a single-point analog ground connection strategy consistent with the manufacturer's guidance. USB differential routing should be length-matched, continuous, and routed away from antenna or switching-regulator paths. Confirm the input impedance, sampling time, source impedance, and oversampling configuration to prevent charge-sharing errors during successive ADC conversions.
Do not assume that every 100-lead STM32L0 part is interchangeable merely because the package is identical. The STM32L071V8T6, for example, does not provide the same crystal-less USB connectivity as the STM32L073V8T6. Before replacing a part, compare the ordering code, alternate-function mapping, bootloader support, USB implementation, peripheral availability, and software initialization sequence. A successful flash operation does not prove that every peripheral pin behaves identically.
अनुपालन जानकारी
No target-specific RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration is confirmed in the accessible product information. Check the current manufacturer product page and applicable compliance documentation before production release.