Microchip Technology

SY88073LMG - 12.5G Limiting Postamplifier | Microchip

MPN: SY88073LMG ✓ सक्रिय
3 V Vdss 16-VFQFN exposed pad, 3 mm x 3 mm Package
न्यूनतम ऑर्डर मात्रा: 1 |

SY88073LMG अवलोकन

The Microchip SY88073LMG is a 1 Gbps to 12.5 Gbps limiting postamplifier IC designed for fiber-optic receiver signal conditioning, with a programmable decision threshold and a 16-VFQFN exposed-pad package measuring 3 mm by 3 mm. It accepts a supply voltage from 3 V to 3.6 V and is specified for an ambient operating range of -40 °C to +85 °C. The device combines high-bandwidth signal amplification with amplitude limiting, making it appropriate for recovering and conditioning high-speed data before downstream digital circuitry.

A limiting postamplifier is a special-purpose high-speed analog IC placed in the receive path of optical communications equipment. It increases the amplitude of small input signals and applies a controlled threshold to reject noise, interference, and other unwanted excursions. In the broader component hierarchy, it belongs to the amplifier family, specifically special-purpose limiting amplifiers used in fiber-optic transceivers and other high-speed serial links.

Key characteristics include an operating data rate of 1 Gbps to 12.5 Gbps, a 3 V to 3.6 V supply range, and support for Ethernet receiver applications. The exposed thermal pad in the 16-VFQFN package provides a direct heat-dissipation path beneath the device. RoHS compliance is identified for the comparable 16-VFQFN product family. The exact gain, input sensitivity, threshold-control range, jitter, bandwidth, and current-consumption figures should be confirmed from the manufacturer datasheet before a production design is released.

The architecture is tailored to continuous-mode, multi-rate optical receiver designs. Signal conditioning before clock recovery or decision circuitry can improve usable signal amplitude while limiting the effects of noise. The programmable decision threshold allows receiver tuning across different optical links, although board-level performance also depends on input coupling, reference voltage generation, source impedance, trace geometry, and the bandwidth requirements of the following circuitry.

Typical applications include 1G and 10G Ethernet optical transceivers, limiting amplifiers for PON equipment, high-speed optical receiver modules, and other serial links operating through 12.5 Gbps. The compact 3 mm by 3 mm footprint supports dense optical-module layouts, although its exposed pad requires deliberate PCB thermal design. Differential routing, short return paths, controlled impedance, and careful power-supply decoupling are particularly important at these data rates.

When laying out the PCB, use the manufacturer pin-description table and recommended land pattern rather than relying on package dimensions alone. Connect the exposed pad to the intended ground plane according to the datasheet, minimize supply-loop inductance, and place bypass capacitance close to the supply pins. Preserve symmetry between complementary signal paths and avoid adding unnecessary stubs or test-point discontinuities that could degrade high-frequency behavior.

This page combines the device identity, package information, operating limits, verified listing references, same-package alternatives, and application-focused design guidance for engineers evaluating the SY88073LMG. Before schematic release, verify the exact threshold-control method, signal polarity, decoupling values, layout stack-up, and absolute maximum ratings against the current Microchip manufacturer documentation.

के लिए ड्रॉप-इन विकल्प SY88073LMG — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

SY88149HLMG

✅ ड्रॉप-इन
📦 16-VFQFN exposed pad, 3 mm x 3 mm
Supply-voltage range and operating-temperature range differ by 0%; verify gain, threshold-control method, signal polarity, and pin assignments

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SY88343BLMG-TR

✅ ड्रॉप-इन
📦 16-VFQFN exposed pad, 3 mm x 3 mm
Supply-voltage range and operating-temperature range differ by 0%; verify gain, threshold-control method, signal polarity, and pin assignments

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

SY88073LMG Maximum Ratings और Electrical Characteristics

Product Type Limiting postamplifier IC
Minimum Data Rate 1 Gbps
Maximum Data Rate 12.5 Gbps
Supply Voltage Minimum 3 V
Supply Voltage Maximum 3.6 V
Minimum Operating Temperature -40 °C
Maximum Operating Temperature +85 °C
पैकेज 16-VFQFN exposed pad, 3 mm x 3 mm
माउंटिंग प्रकार Surface mount
Signal Application Ethernet fiber-optic receiver
Decision Threshold Programmable
Operating Mode Continuous mode
RoHS स्थिति Compliant
Amplifier Category Special-purpose limiting amplifier
Exposed Pad Present

SY88073LMG 16-vfqfn exposed pad, 3 mm x 3 mm पिन कॉन्फ़िगरेशन गाइड

SY88073LMG (16-vfqfn exposed pad, 3 mm x 3 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस एनालॉग कंपोनेंट में इनपुट, आउटपुट और पावर सप्लाई पिन हैं। ऑफ़सेट नल, कम्पनसेशन और एनेबल पिन कॉन्फ़िगरेशन के लिए निर्माता डेटाशीट देखें। सिग्नल कंडीशनिंग और एम्प्लीफ़ायर सर्किट के लिए आदर्श।

SY88073LMG के लिए 16-vfqfn exposed pad, 3 mm x 3 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: SY88073LMG.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

SY88073LMG के लिए उपयुक्त है 6 अनुप्रयोगs: 10G Ethernet Optical Receivers, 1G Ethernet Optical Transceivers, PON Optical Receiver Modules, High-Speed Serial Link Conditioning, Optical Receiver Test and Measurement, High-Speed Photonic Interface Modules.

🌐

10G Ethernet Optical Receivers

The SY88073LMG fits a 10G-class optical receiver because it supports continuous-mode operation from 1 Gbps to 12.5 Gbps and combines high-bandwidth amplification with a programmable decision threshold. Position it after the photodiode or receiver front end to increase the amplitude of the recovered signal before clock-and-data-recovery or limiting circuitry evaluates the data. Its 3 V to 3.6 V supply aligns with the 3.3 V-class electronics commonly used in optical modules. The main design consideration is to preserve controlled impedance and symmetry on the high-speed path while tuning the threshold against the receiver’s noise and jitter budget.

🌐

1G Ethernet Optical Transceivers

The SY88073LMG can serve as the limiting postamplifier in a 1G Ethernet optical receiver because its specified operating range begins at 1 Gbps and extends to 12.5 Gbps. A programmable decision threshold allows the receiver designer to optimize the transition point between valid signal excursions and noise-induced false decisions. This is useful in compact SFP or integrated transceiver designs where amplifier gain, threshold adjustment, and power-supply filtering must coexist in a small area. The design should use short high-frequency traces, local bypass capacitance, and the manufacturer’s exposed-pad layout to limit coupling and thermal degradation.

🌐

PON Optical Receiver Modules

For passive optical network receiver modules, the SY88073LMG provides a high-speed limiting stage covering the 1 Gbps to 12.5 Gbps range identified for the device family. The stage can amplify a weak recovered optical signal and apply a programmable threshold before passing the result to digital processing. This is particularly relevant to burst-sensitive and cost-constrained optical equipment, where stable decision behavior is needed across changing optical power. Designers should verify burst-mode compatibility, settling behavior, threshold-control noise, and the required receive sensitivity against the complete transceiver specification rather than relying on data-rate compatibility alone.

📡

High-Speed Serial Link Conditioning

The SY88073LMG is suitable for high-speed serial-link conditioning when the receiver requires amplitude restoration and noise rejection before a downstream decision circuit. Its 12.5 Gbps maximum specified rate provides margin for links operating below that limit, while the programmable threshold allows adjustment for source amplitude, channel loss, and receiver noise. A practical implementation must preserve controlled differential impedance and keep the amplifier input path short because parasitic inductance and capacitance can alter edge response at multi-gigabit data rates. The threshold should be established from noise and jitter measurements on the intended production board.

🖥️

Optical Receiver Test and Measurement

The SY88073LMG can be used in laboratory receiver fixtures and optical-loopback test equipment that need programmable signal limiting over the 1 Gbps to 12.5 Gbps range. By varying the decision threshold, an engineer can characterize signal amplitude, noise margin, and transition behavior under repeatable stimulus conditions. The device’s compact 16-VFQFN exposed-pad package simplifies integration into dense test fixtures, but thermal and RF layout remain important. Use controlled impedance fixtures, short connections, calibrated power filtering, and repeatable threshold sweeps so measurements reflect the receiver path rather than fixture variation.

💡

High-Speed Photonic Interface Modules

The SY88073LMG is appropriate for compact photonic interface modules that require a dedicated high-speed limiting stage close to the detector or front-end circuitry. Its 1 Gbps to 12.5 Gbps operating range and 3 mm by 3 mm 16-VFQFN footprint support dense layouts without relaxing interface performance. Placing the limiting stage near the signal source can reduce sensitivity to board loss and keep the high-speed return path compact. The module designer must allocate an uninterrupted ground path, connect the exposed pad according to the manufacturer layout, decouple the 3 V to 3.6 V supply locally, and validate the threshold across temperature and optical-power extremes.

What is the Microchip SY88073LMG?
The Microchip SY88073LMG is a high-speed limiting postamplifier IC for fiber-optic receivers, covering continuous-mode data rates from 1 Gbps to 12.5 Gbps. According to the Microchip SY88073L family information, the device uses a high-bandwidth input stage and a programmable decision threshold. It is supplied in a compact 16-VFQFN exposed-pad package for high-speed Ethernet and optical-module designs.
What are the key specifications of SY88073LMG that engineers should know?
The SY88073LMG supports data rates from 1 Gbps to 12.5 Gbps, a 3 V to 3.6 V supply range, and an operating temperature range of -40 °C to +85 °C. Microchip identifies it as a limiting postamplifier with a programmable decision threshold for Ethernet fiber-optic receiver applications. The package is a 16-VFQFN with exposed pad, measuring 3 mm by 3 mm and intended for surface-mount assembly.
What is the supply voltage of the SY88073LMG?
The SY88073LMG operates from a 3 V minimum supply to a 3.6 V maximum supply. The same 3 V to 3.6 V range appears in the manufacturer-family information and in the verified comparison data for the comparable 16-VFQFN limiting amplifiers. This range is typical of 3.3 V-class fiber-optic receiver electronics, but transient and absolute-maximum limits must be checked in the manufacturer datasheet.
Which applications use the SY88073LMG?
The SY88073LMG is suitable for 1G and 10G Ethernet optical receivers, PON receiver hardware, and other high-speed serial links operating up to 12.5 Gbps. Its limiting function amplifies the received signal and applies a programmable threshold before downstream decision circuitry. The exposed-pad 16-VFQFN package also makes the device appropriate for compact optical transceiver modules where board area is limited.
Where can I download the SY88073LMG datasheet PDF?
The SY88073LMG datasheet can be reached through the Microchip product family page for SY88073L or through the datasheet listing linked on this page. The manufacturer page describes the device as a limiting postamplifier for 1 Gbps to 12.5 Gbps continuous-mode fiber-optic receivers. Use the current Microchip documentation for the authoritative pinout, electrical characteristics, recommended PCB layout, and absolute maximum ratings.
Where can I find the SY88073LMG pinout?
The SY88073LMG pinout is found in the pin-description table of the current Microchip SY88073L family datasheet. The component uses a 16-VFQFN exposed-pad package with a 3 mm by 3 mm body, but the exact numbered signal assignments are not reproduced in the product listing. Confirm pin numbers, exposed-pad connection, and the recommended land pattern before assigning PCB tracks or creating the schematic footprint.
How does the SY88073LMG differ from the SY88149HLMG?
The verified comparison data shows that both parts are Microchip limiting amplifiers in 16-VFQFN exposed-pad packages, with the same 3 V to 3.6 V supply range and -40 °C to +85 °C operating-temperature limits. The listed family description distinguishes the SY88073L by its programmable wide-range decision threshold. Signal-path and threshold-control details should be compared in the manufacturer datasheets before treating the devices as interchangeable.
What is the best drop-in replacement for the SY88073LMG?
The closest verified same-package candidates are the Microchip SY88149HLMG and SY88343BLMG-TR, both compared against the SY88073LMG as 16-VFQFN limiting amplifiers. Their 3 V to 3.6 V supply and -40 °C to +85 °C temperature ranges match the target. Because signal polarity, threshold programming, gain, bandwidth, and exposed-pad requirements must be identical for a true drop-in, validate those details against both manufacturer datasheets before substitution.
Can SY88149HLMG replace SY88073LMG?
The SY88149HLMG is a same-manufacturer, same-package candidate, but a PCB swap should not be approved solely from the package match. Both devices are listed as 16-VFQFN limiting amplifiers with a 3 V to 3.6 V supply and -40 °C to +85 °C temperature range. Confirm pin-to-pin signal assignments, decision-threshold implementation, gain, bandwidth, and exposed-pad grounding in the current Microchip datasheets.
What can replace the SY88073LMG in a high-speed optical receiver?
A replacement should use the same 16-VFQFN footprint, 3 V to 3.6 V supply range, and compatible high-speed limiting-amplifier architecture. The verified shortlist consists of SY88149HLMG and SY88343BLMG-TR. These are not guaranteed drop-ins until their signal polarity, threshold-control voltage, gain, bandwidth, and pin assignments match the SY88073LMG. Use the manufacturer comparison documents before changing an approved PCB.
When should I choose the SY88073LMG over the SY88149HLMG?
Choose the SY88073LMG when the receiver design specifically calls for the SY88073L family's wide-range programmable decision threshold and continuous-mode operation from 1 Gbps to 12.5 Gbps. The SY88149HLMG is relevant when its separate gain, threshold, and signal-path characteristics better match the receiver architecture. The target and alternative share the 16-VFQFN package and verified supply and temperature limits, so the decision should be based on circuit behavior rather than footprint alone.
Is the SY88073LMG suitable for a 10G Ethernet optical receiver?
Yes, the SY88073LMG is specifically identified for 1 Gbps to 12.5 Gbps fiber-optic receiver applications, which includes the nominal rate class used by 10G Ethernet optical links. Its limiting postamplifier architecture can condition a small received signal before downstream digital decision circuitry. System-level suitability still depends on the optical detector output, coupling network, required input sensitivity, threshold tuning, jitter budget, and channel loss.
How should the SY88073LMG be laid out on a high-speed PCB?
Place power bypass capacitance close to the supply pins, provide a short and low-inductance ground return, and follow the manufacturer land pattern for the 16-VFQFN exposed pad. Preserve differential signal symmetry and controlled impedance on high-speed routes. Avoid long stubs and unnecessary discontinuities, and evaluate the exposed pad as a thermal path rather than assuming that the small 3 mm by 3 mm package removes all heat-management requirements.
Where can I buy SY88073LMG online?
Use the Request a Quote form on this page to request current SY88073LMG availability, unit pricing, minimum order quantity, and lead time. The form is the appropriate channel because component pricing and stock change with market conditions and order volume. Provide the exact 16-VFQFN package requirement and the intended reel or delivery format with the request to reduce fulfillment ambiguity.
What is the lead time for SY88073LMG?
The current lead time should be requested through the Request a Quote form on this page rather than inferred from general catalog information. Lead time can vary with order quantity, package format, manufacturing continuity, and current inventory. State the required quantity, tape-and-reel orientation, target date, and shipping destination in the request so procurement can provide a relevant schedule.

के लिए इंजीनियरिंग संदर्भ डेटा SY88073LMG — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the SY88073LMG when the optical receiver needs a limiting postamplifier specified for continuous-mode operation from 1 Gbps to 12.5 Gbps with a programmable decision threshold. It is a strong fit for 1G and 10G-class Ethernet receivers, PON equipment, and compact photonic modules where threshold tuning and a small exposed-pad footprint are important. Consider the SY88149HLMG when its specific gain and threshold characteristics provide a closer match to an existing receiver architecture; the verified package, supply-voltage, and temperature specifications match the target. Consider the SY88343BLMG-TR for robust limiting applications after confirming threshold-control and signal-path compatibility. For every alternative, compare the complete manufacturer datasheet before approving a drop-in substitution. A shared 16-VFQFN footprint alone does not guarantee compatible gain, polarity, threshold voltage, bandwidth, or pin functions.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद SY88149HLMG SY88343BLMG-TR
Package 16-VFQFN exposed pad, 3 mm x 3 mm 16-VFQFN exposed pad, 3 mm x 3 mm 16-VFQFN exposed pad, 3 mm x 3 mm
Brand Microchip Technology Microchip Technology Microchip Technology
Product Category Limiting amplifiers Limiting amplifiers Limiting amplifiers
Supply Voltage Range 3 V to 3.6 V 3 V to 3.6 V 3 V to 3.6 V
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C
Description 1 Gbps to 12.5 Gbps limiting postamplifier with decision threshold Limiting amplifier Robust limiting postamplifier solution
RoHS Status Compliant Compliant Compliant
Mounting Style Surface mount Surface mount Surface mount

मुख्य विशेषताएँ

  • Wide operating-rate coverage (बनामSY88149HLMG)
  • Programmable decision-threshold architecture (बनामSY88343BLMG-TR)
  • Matched compact package and supply range (बनामSY88149HLMG)

डिज़ाइन नोट्स

Use the manufacturer land pattern and pin-description table for the 16-VFQFN exposed-pad package. Keep the high-speed signal paths short, preserve differential symmetry, and avoid long stubs. Connect the exposed pad to the specified ground reference and provide a low-inductance return beneath the device so switching currents do not share the sensitive input path.

Place the supply bypass network immediately beside the relevant power and ground pins, following the values and topology in the Microchip datasheet. The supported supply range is 3 V to 3.6 V. Check droop during threshold adjustment and fast digital transitions, because inadequate local decoupling can convert current pulses into signal noise even when the average supply voltage remains within range.

Do not approve a replacement based only on the shared 16-VFQFN footprint. Verify signal polarity, pin numbering, threshold-control range and polarity, gain, bandwidth, termination requirements, and exposed-pad connections for the SY88149HLMG or SY88343BLMG-TR. A mechanically identical package can still require schematic or layout changes if any of these functions differ.

Treat the exposed pad as the primary heat-transfer path in the 3 mm by 3 mm package. Use adequate ground-plane area and copper beneath the pad, minimize thermal bottlenecks, and estimate the temperature rise from actual power dissipation before operating at the +85 °C limit. Use the manufacturer thermal characterization for final qualification.

अनुपालन जानकारी

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

RoHS compliance is identified in the verified comparison information for the 16-VFQFN product family. No specific REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was established for this exact MPN.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

SY88073LMG datasheet SY88073LMG pinout SY88073LMG datasheet pdf SY88073LMG price SY88073LMG stock SY88073LMG equivalent SY88073LMG replacement SY88073LMG footprint SY88073LMG schematic SY88073LMG vs SY88149HLMG SY88073LMG vs SY88343BLMG-TR Microchip SY88073LMG

संबंधित कंपोनेंट्स और शब्द

Microchip Technology SY88073LMG SY88073L SY88149HLMG SY88343BLMG-TR limiting postamplifier limiting amplifier special-purpose amplifier amplifier IC fiber-optic receiver Ethernet 1 Gbps 12.5 Gbps programmable decision threshold 16-VFQFN QFN family exposed pad surface mount SMD 3 V to 3.6 V supply RoHS high-speed signal conditioning 10G Ethernet PON
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें