Texas Instruments

THS6053IDR - 175mA Dual ADSL Line Driver | Texas Instruments (Tape & Reel)

MPN: THS6053IDR ✗ जीवन की समाप्ति
5 V to 15 V Vdss 175 mA per channel Id Full-rate ADSL and G.Lite Rds(on) 14-SOIC, 3.90 mm width Package
न्यूनतम ऑर्डर मात्रा: 1 |

THS6053IDR अवलोकन

The Texas Instruments THS6053IDR is a dual high-speed DSL line driver designed for ADSL customer-premises-equipment and power-line communications. It provides two output channels, each capable of sourcing 175 mA, and operates from a 5 V to 15 V supply in a 14-pin SOIC package. The device is intended for dual ±12 V operation, with 5.2 mA of supply current per channel and a shutdown function for reducing power consumption when the line driver is not needed.

A DSL line driver is an interface integrated circuit that converts a low-voltage logic signal into a high-current, low-voltage differential signal suitable for transmission over a twisted pair. Within the signal-chain hierarchy, the THS6053IDR is a line driver within the broader category of interface ICs, bridging digital logic and telephone-line or power-line networks. Its 175 mA output capability provides the current needed to drive a 1:1 ratio isolation transformer and a line termination network.

The THS6053IDR supports both full-rate ADSL and G.Lite applications. A documented current-noise density of 2.7 pA/√Hz is particularly useful in this environment because it limits the broadband noise coupled into the hybrid and the downstream channel. Wide supply-voltage tolerance permits operation from single-ended rails or from split ±12 V supplies, while the shutdown input supports power-management strategies in multichannel CPE equipment.

The device provides two line drivers and no receivers. Its key design consideration is that the line-driver outputs must remain compatible with the external transformer, termination, protection, and filtering network. Output-current headroom and thermal dissipation should be checked against the selected transformer and cable length rather than inferred only from the nominal 175 mA rating.

Typical uses include ADSL CPE line interfaces, PLC modems, splitter and filter assemblies, and other high-speed DSL or line-driver subsystems. This page also consolidates verified pricing, same-package alternatives, pin and application guidance, and comparison information that is not presented together in a single manufacturer document.

के लिए ड्रॉप-इन विकल्प THS6053IDR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं THS6053IDR (समान फॉर्म फैक्टर और फुटप्रिंट).

THS6053IDG4

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 14-SOIC
Same THS6053 electrical device and 14-SOIC footprint; ordering suffix identifies the lead-free finish, with output current and supply range unchanged

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

THS6053IDRG4

✅ ड्रॉप-इन
📦 14-SOIC
Same THS6053IDR electrical configuration and 14-SOIC footprint; suffix changes reel packaging and lead-free finish, with rated current unchanged at 175 mA

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

THS6053ID

✅ ड्रॉप-इन
Texas Instruments
📦 14-SOIC
Dual high-speed DSL line driver · 2 · 175 mA per channel · 5 V to 15 V · ±12 V · 5.2 mA per channel · 2.7 pA/√Hz · Yes

कीमत के लिए संपर्क करें

डेटाशीट देखें →

THS6053IDR विशेषताएं

Product Type Dual high-speed DSL line driver
Number of Drivers 2
Output Current 175 mA per channel
Supply Voltage Range 5 V to 15 V
Dual Supply Operation ±12 V
सप्लाई करंट 5.2 mA per channel
Current Noise Density 2.7 pA/√Hz
Shutdown Function Yes
Compatible Standards or Protocols Full-rate ADSL and G.Lite
Transformer Compatibility 1:1 transformer ratio
ऑपरेटिंग तापमान रेंज -40 °C to +85 °C
पैकेज 14-SOIC, 3.90 mm width
माउंटिंग प्रकार Surface mount
RoHS स्थिति unknown
REACH Status unknown
AEC-Q100 Qualification Not applicable; this is not an automotive-qualified device in the verified data

THS6053IDR 14-soic, 3.90 mm width पिन कॉन्फ़िगरेशन गाइड

THS6053IDR (14-soic, 3.90 mm width पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

THS6053IDR के लिए 14-soic, 3.90 mm width पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: THS6053IDR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

THS6053IDR के लिए उपयुक्त है 6 अनुप्रयोगs: ADSL Customer Premises Equipment, G.Lite DSL Interface Cards, Power-Line Communication Modems, DSL Splitters and Filter Assemblies, Central-Office Line Interface Equipment, High-Speed Digital Line Driver Modules.

🌐

ADSL Customer Premises Equipment

The THS6053IDR is designed for the high-current line-driving stage in ADSL CPE equipment. Its two 175 mA output channels support separate full-rate ADSL or G.Lite paths, while operation from a 5 V to 15 V supply permits ±12 V rail use. The device interfaces with a 1:1 isolation transformer and provides shutdown control for reducing consumption when a line is inactive. Its 2.7 pA/√Hz current-noise density helps limit broadband noise coupled through the hybrid into the downstream channel.

🌐

G.Lite DSL Interface Cards

The THS6053IDR can drive G.Lite interfaces because the device is explicitly identified as compatible with both full-rate ADSL and G.Lite service. Its two outputs reduce the component count in a dual-line card, and each channel can source 175 mA for the external transformer and termination network. Shutdown is useful when line activity must be controlled during idle periods. Board-level validation should still confirm peak current, transformer DC bias, and signal integrity against the actual line and protection network.

🔧

Power-Line Communication Modems

The THS6053IDR is suitable for power-line communication modems because the verified device description identifies it as an ADSL CPE and PLC line driver. The 175 mA per-channel output supports high-current line excitation, while the 2.7 pA/√Hz current-noise density helps contain broadband noise that could otherwise enter the line through the hybrid. The 5 V to 15 V operating range supports conventional line-driver power architecture, and shutdown permits lower-power states when the modem does not require active transmission.

📡

DSL Splitters and Filter Assemblies

In a DSL splitter or passive-filter assembly, the THS6053IDR provides the high-current differential excitation stage required to couple the modulated signal into the transformer and telephone line. Two driver channels allow one package to serve two directions or line assignments when appropriate. Its documented shutdown function can reduce power use in inactive paths. Designers should preserve the required return path, transformer ratio, and protection layout because the IC alone does not determine achievable data rate or line attenuation.

🏭

Central-Office Line Interface Equipment

The THS6053IDR can serve as the line-driver element in central-office line-interface equipment where a 175 mA output and split-rail operation are required. The device operates from ±12 V while drawing a documented 5.2 mA of supply current per channel, helping separate drive capability from quiescent consumption. Its low current-noise density helps reduce broadband noise coupled back through line hybrids. The shutdown input supports controlled operating states, although system-level isolation and protection requirements must be verified independently.

⚡

High-Speed Digital Line Driver Modules

The THS6053IDR is appropriate for modular high-speed digital line-driver designs requiring two independent 175 mA outputs. It accommodates full-rate ADSL and G.Lite waveforms, supports a 5 V to 15 V supply, and works with a 1:1 transformer ratio. The low current-noise density of 2.7 pA/√Hz is advantageous when the line interface has limited noise margins. In a custom module, the output-current capability, package thermal performance, and external network must be evaluated as one complete signal path.

अनुशंसित उत्पादों का सारांश

THS6053 Base TI THS6053 line-driver family device उपयोग में: ADSL Customer Premises Equipment, Power-Line Communication Modems, Central-Office Line Interface Equipment THS6053IDR Texas Instruments उपयोग में: ADSL Customer Premises Equipment, DSL Splitters and Filter Assemblies, High-Speed Digital Line Driver Modules THS6053IDG4 Lead-finish ordering option for the THS6053ID device उपयोग में: G.Lite DSL Interface Cards, High-Speed Digital Line Driver Modules THS6053IDRG4 Lead-free tape-and-reel ordering option उपयोग में: G.Lite DSL Interface Cards, DSL Splitters and Filter Assemblies, High-Speed Digital Line Driver Modules
What is the THS6053IDR and what is it used for?
The THS6053IDR is a Texas Instruments dual high-speed DSL line driver intended for ADSL customer-premises equipment and power-line communication equipment. It contains two line-driver outputs and no receivers, and each output can source 175 mA. According to the verified TI product information, it supports full-rate ADSL and G.Lite service while operating from a 5 V to 15 V supply, including ±12 V dual-rail operation.
What are the key specifications of THS6053IDR that engineers should know?
The key THS6053IDR specifications are two driver outputs, 175 mA of output current per channel, a 5 V to 15 V supply range, 5.2 mA of supply current per channel, and a documented current-noise density of 2.7 pA/√Hz. The device operates from -40 °C to +85 °C and is housed in a 14-pin SOIC. It also includes shutdown control and is compatible with a 1:1 transformer ratio.
What is the output current of the THS6053IDR?
The THS6053IDR can source 175 mA per line-driver channel. This current level allows the device to operate with a compatible 1:1 isolation transformer and its associated termination network. The verified TI product description identifies the THS6053 as a 175 mA line driver, while the DigiKey listing confirms that THS6053IDR is a two-driver, zero-receiver device in a 14-SOIC package.
What supply voltage does THS6053IDR require?
The THS6053IDR operates from 5 V to 15 V. It is specifically intended for ±12 V operation, allowing it to be used with split positive and negative rails in ADSL line-interface circuits. The distributor specification also identifies the operating temperature range as -40 °C to +85 °C and identifies the device as a surface-mount 14-SOIC line driver.
Where can I download the THS6053IDR datasheet PDF?
The official THS6053 datasheet and ordering information are available from the Texas Instruments product page at https://www.ti.com/product/THS6053. A mirrored manufacturer PDF is also indexed at https://www.abc-semi.com/datasheets/THS6053IDR.pdf. Engineers should verify document revisions and limits against the original TI copy before releasing a production design, particularly because the verified distributor data identifies THS6053IDR as obsolete.
Where can I find the THS6053IDR pinout?
The THS6053IDR pinout is published in the manufacturer datasheet for the 14-SOIC package. The device has two line-driver outputs plus shutdown and supply-related connections, but the verified web data used for this page does not expose a pin-by-pin mapping. The pin table is therefore marked unavailable rather than reconstructed from memory. Use the TI THS6053 datasheet and its 14-pin package drawing for authoritative numbering.
What is the difference between THS6053IDR and THS6053IDRR?
THS6053IDRR and THS6053IDR use the same 14-SOIC electrical device, while the R suffix identifies the tape-and-reel shipping format used for volume production. Because the package outline and pin assignment remain the same, THS6053IDRR can be used where the reeled form is required. The suffix is a packaging and ordering code rather than a change in output current, supply range, or shutdown behavior.
What is the difference between THS6053IDR and THS6053IDRRG4?
THS6053IDRRG4 identifies the tape-and-reel, lead-free finish version of the THS6053 device, whereas THS6053IDR is the base orderable designation. The verified comparison information indicates that both correspond to the same THS6053IDR product overview, including operation from ±12 V and 5.2 mA of supply current per channel. The G4 suffix denotes the lead-free termination finish used for green-environment compliance.
What can replace THS6053IDR?
The closest documented drop-in replacements are THS6053IDRR and THS6053IDRRG4, which retain the THS6053IDR electrical configuration and 14-SOIC footprint while changing the ordering or tape-and-reel format. The THS6053IDRG4 version is another same-footprint ordering option. When the THS6053IDR is marked obsolete, engineers should confirm availability and compare the manufacturer datasheet before substituting any alternate line-driver family.
What is the best Texas Instruments equivalent for THS6053IDR?
For a Texas Instruments replacement that preserves the 14-SOIC footprint and the THS6053 electrical configuration, THS6053IDRG4, THS6053IDRR, and THS6053IDRRG4 are the closest same-brand options identified in the verified data. Their main differences are order code, lead-free finish, and reel packaging. The available cross-reference results do not identify a separate pin-compatible cross-brand device, so a cross-brand claim should not be made without additional engineering verification.
Is THS6053IDR suitable for ADSL CPE line interfaces?
The THS6053IDR is specifically suitable for ADSL CPE line interfaces because it was designed for full-rate ADSL and G.Lite service. Its 175 mA per-channel output current supports a compatible 1:1 isolation transformer, while the 2.7 pA/√Hz current-noise density helps reduce broadband noise returned through the hybrid into the downstream channel. A shutdown function is also available for inactive line states.
When should I choose THS6053IDR over another DSL line driver?
Choose the THS6053IDR when a design specifically requires a dual 175 mA line-driver stage with shutdown, ±12 V capability, and compatibility with a 1:1 isolation transformer. Its 2.7 pA/√Hz current-noise density is useful in noise-sensitive line paths. If the design instead requires a different output-current rating, slew rate, transformer ratio, or supply architecture, the existing footprint alone is not sufficient justification for substitution.
Is THS6053IDR the same as THS6053IDRRG4?
Yes, THS6053IDRRG4 is a same-device ordering option associated with THS6053IDR rather than a different line-driver architecture. Both use the 14-SOIC package and correspond to the THS6053IDR electrical product overview. The practical differences are the lead-free finish and tape-and-reel shipping format, so procurement should confirm the exact suffix required by the assembly process.
How much does THS6053IDR cost as of 2026-10-29?
The verified market listing for THS6053IDR reported a price range of US $3.82 to US $5.41 as of 2026-10-29. Because no verified quantity-break schedule was supplied, this page uses the upper end of that published range as a conservative reference price at every displayed quantity tier rather than inventing unverified volume discounts. Actual cost and availability can vary with the obsolete lifecycle status and supplier inventory.
Where can I buy THS6053IDR online and what is the lead time?
The THS6053IDR can be found through the listed DigiKey product page and multiple electronics marketplaces, with a verified listing price range of US $3.82 to US $5.41 as of 2026-10-29. The available data identifies the part as obsolete and does not provide a verified current stock quantity or lead time, so buyers should request a written quotation and inventory confirmation before scheduling production. Obsolete status can make supply intermittent rather than guaranteed.
Is THS6053IDR in stock?
Stock for THS6053IDR is not established by the verified data. The DigiKey search result states that the part can be purchased and shipped, while another distributor listing identifies the device as obsolete. Those statements do not provide a verified quantity on hand. Treat availability as order-on-request, request the supplier's current stock and manufacturing-lead-time quotation, and do not rely on the listing alone for a production schedule.
Why is a 175 mA output rating important in a DSL line driver?
A 175 mA output rating provides the current headroom needed to charge the external line-transformer and termination network, rather than only driving a logic load. The THS6053IDR is rated at 175 mA per channel and is compatible with a 1:1 transformer ratio. Actual transformer topology, DC bias, cable length, protection components, and waveform shape still determine the peak current and dissipation experienced in a specific design.

के लिए इंजीनियरिंग संदर्भ डेटा THS6053IDR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the THS6053IDR when rebuilding or maintaining a dual ADSL CPE, G.Lite, or PLC line interface that specifically uses the TI THS6053 function, a 14-SOIC footprint, a 1:1 transformer arrangement, and 175 mA-class output drive. The THS6053IDRG4 and THS6053IDRRG4 ordering options are preferable when the bill of materials requires a lead-free finish, while THS6053IDRR is useful for reel-fed assembly. These are procurement and order-code variants rather than performance upgrades, so the selection should be driven primarily by supply availability rather than an assumed electrical difference. Do not select the part solely because another line driver has a similar package: confirm output-current rating, supply arrangement, shutdown polarity, noise behavior, and external transformer requirements against the manufacturer datasheet. Because THS6053IDR is reported as obsolete, obtain supplier confirmation of genuine stock and a manufacturing lead time before committing to a production release.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद THS6053IDRG4 THS6053IDRRG4 THS6053IDRR THS6053
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 14-SOIC, 3.90 mm width 14-SOIC - same 14-SOIC - same 14-SOIC - same 14-SOIC - same
Product Type Dual high-speed DSL line driver Dual high-speed DSL line driver Dual high-speed DSL line driver Dual high-speed DSL line driver 175 mA ADSL CPE and PLC line driver
Number of Drivers 2 2 2 2 2
Number of Receivers 0 0 0 0 0
Output Current 175 mA per channel 175 mA per channel 175 mA per channel 175 mA per channel 175 mA
Supply Voltage Range 5 V to 15 V 5 V to 15 V 5 V to 15 V 5 V to 15 V Wide supply range; ±12 V operation
Supply Current 5.2 mA per channel 5.2 mA per channel 5.2 mA per channel 5.2 mA per channel 5.2 mA per channel
Current Noise Density 2.7 pA/√Hz 2.7 pA/√Hz 2.7 pA/√Hz 2.7 pA/√Hz 2.7 pA/√Hz
Operating Temperature Range -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C -40 °C to +85 °C

मुख्य विशेषताएँ

  • Dual high-current line-driver output in one package (बनामTHS6053IDRR)
  • Direct support for full-rate ADSL and G.Lite interfaces (बनामTHS6053IDRG4)
  • Low current-noise density for hybrid noise control (बनामTHS6053IDRRG4)
  • Shutdown support for controlled operating states (बनामTHS6053)

डिज़ाइन नोट्स

The 175 mA figure is an output-current capability, not a recommended continuous-load setting. Evaluate the peak and average current drawn by the transformer primary, termination network, protection components, and cable under worst-case modulation. The documented 5.2 mA supply current per channel describes quiescent consumption and does not include output drive current.

Keep the driver outputs and their transformer connections compact because high-current edges can create radiated and conducted emissions. Use the shortest practical return path for the driver supply and transformer center tap, and preserve the datasheet-recommended external component placements. Do not add long copper stubs to the high-current outputs, since excessive inductance can produce overshoot and ringing.

The 2.7 pA/√Hz current-noise density is relevant to the hybrid return path and downstream channel, but system noise also comes from the power supply, transformer, termination, and protection network. Validate the complete line interface with the intended cable and transformer. Keep unused shutdown states defined and ensure that every supply rail remains within the verified 5 V to 15 V range.

Do not treat the R, RG4, G4, or base-family ordering suffixes as different electrical designs. The verified data shows that they correspond to the same THS6053 line-driver product overview, with differences in reel packaging or lead-free finish. Before substituting, verify that the exact suffix has a 14-SOIC footprint and confirm the current lead time because THS6053IDR is identified as obsolete.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

Compliance fields are unknown because the verified web results do not explicitly state RoHS, REACH, halogen-free, or conflict-minerals status for THS6053IDR. The G4 ordering suffix is associated with a lead-free option, but the verification source provided for this page does not expressly confirm a RoHS declaration. AEC-Q100 is not applicable because this integrated circuit is not identified as automotive-qualified.

संबंधित खोजें

THS6053IDR THS6053IDR datasheet Texas Instruments THS6053IDR THS6053IDR price THS6053IDR 175mA 14-SOIC 14-SOIC ADSL CPE line driver THS6053IDR ADSL CPE application THS6053IDR vs THS6053IDRR THS6053IDR drop-in replacement buy THS6053IDR online THS6053IDR pinout 14-SOIC what can replace THS6053IDR THS6053IDR lead time obsolete 175mA dual DSL line driver SOIC-14 THS6053IDR PLC line driver

संबंधित कंपोनेंट्स और शब्द

Texas Instruments THS6053IDR THS6053IDRG4 THS6053IDRRG4 THS6053IDRR THS6053 DSL line driver high-speed operational amplifier line driver interface IC ADSL G.Lite power-line communication ADSL customer premises equipment 175 mA output current 5 V to 15 V supply ±12 V operation 2.7 pA/√Hz current-noise density 5.2 mA supply current per channel 1:1 transformer ratio shutdown function 14-SOIC surface-mount package line termination network
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें