TJA1028T/3V3/20/1J - 3.3V LIN Transceiver | NXP
MPN: TJA1028T/3V3/20/1J ✓ सक्रियTJA1028T/3V3/20/1J अवलोकन
A LIN transceiver is a bus-interface semiconductor that converts logic-level transmit and receive signals into the physical signals used by a Local Interconnect Network. The TJA1028 combines that interface function with a local voltage-regulator function, reducing the component count in nodes that need both LIN communications and a low-current 3.3 V supply. Its compliance with LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 supports use in standardized 12 V vehicle-network architectures.
The principal feature of the TJA1028T/3V3/20/1J is its integrated low-dropout regulator, which delivers up to 70 mA and is configured for 3.3 V output. The ordering code identifies the 3.3 V regulator variant in the 8-pin SOIC package. The LIN interface is designed for compact local nodes, while the integrated regulator supplies nearby low-current circuitry without requiring a separate discrete regulator package.
The architecture places the LIN physical interface and regulated supply in one 8-pin SOIC device. This consolidation can shorten PCB routing between the bus transceiver and local power circuit while reducing the number of external components. The LIN-side implementation supports robust 12 V vehicle-network operation, including strong electrostatic-discharge performance and tolerance of high voltages on the LIN bus as described by NXP.
Typical applications include LIN master or slave nodes in vehicle body and comfort systems, seat and door modules, climate-control interfaces, switch and sensor nodes, and compact automotive subsystems. It is also suitable for LIN-based actuator controllers and low-current ECU peripherals that can use the integrated 3.3 V rail. The 70 mA regulator capability should be checked against the total load, including local logic and transceiver requirements.
For PCB design, use the manufacturer pin-description table when assigning all eight SOIC pins and follow the recommended input, output and bus-decoupling arrangement. Keep the LIN connection away from sensitive analog or high-speed digital traces, provide the required protection and common-mode components specified in the datasheet, and account for voltage drop and regulator headroom across the complete 12 V automotive supply range.
This product page combines the NXP device description, standard-compliance information, package details, commercial sourcing guidance, and application-focused design guidance. It also distinguishes exact functional alternatives from variants that change the regulated output voltage, helping engineers avoid substitutions that are not electrically interchangeable.
के लिए ड्रॉप-इन विकल्प TJA1028T/3V3/20/1J — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
TJA1028T/3V3/20
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TJA1028T/3V3/20/1J विशेषताएं
| Product Type | LIN transceiver with integrated low-drop voltage regulator |
| LIN Protocol Compliance | LIN 2.0, LIN 2.1, SAE J2602 |
| International Standard | ISO 17987-4:2016 for 12 V systems |
| Regulated Output Voltage | 3.3 V |
| Integrated Regulator Output Current | Up to 70 mA |
| Supply Variant | 3.3 V and 5.0 V family variants |
| Bus Type | Local Interconnect Network (LIN) |
| Automotive Supply Class | 12 V |
| पैकेज | 8-pin SOIC |
| माउंटिंग प्रकार | Surface mount |
| Automotive Qualification | AEC-Q100 qualified |
| RoHS स्थिति | Compliant |
| Electrostatic Discharge Protection | Strong ESD performance |
| LIN Bus Voltage Tolerance | High-voltage LIN bus tolerance |
TJA1028T/3V3/20/1J 8-pin soic पिन कॉन्फ़िगरेशन गाइड
TJA1028T/3V3/20/1J (8-pin soic पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TJA1028T/3V3/20/1J.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TJA1028T/3V3/20/1J के लिए उपयुक्त है 6 अनुप्रयोगs: Automotive LIN Master Node, Vehicle Door and Seat Module, Climate-Control LIN Interface, LIN Sensor Node, Body Switch and Actuator Controller, Compact Automotive ECU Peripheral.
Automotive LIN Master Node
The TJA1028T/3V3/20/1J fits a compact automotive LIN master because it combines a standards-compliant LIN physical interface with a local 3.3 V supply. According to the NXP datasheet, the interface supports LIN 2.0, LIN 2.1, SAE J2602 and ISO 17987-4:2016 for 12 V systems. Place the device between the host MCU's TXD and RXD signals and the LIN bus, then use the integrated regulator for compatible low-current local circuitry. Its 70 mA regulator capability can simplify node partitioning, although the complete load must remain below that limit. Bus protection and common-mode components should follow the manufacturer application guidance.
अनुशंसित
Vehicle Door and Seat Module
A door or seat module can use the TJA1028T/3V3/20/1J to consolidate its LIN connection and local regulated supply. The 3.3 V regulator can provide up to 70 mA for a compatible MCU, position sensor interface or driver-control logic, while the integrated LIN transceiver handles the physical bus layer. This consolidation is especially useful when the enclosure limits board area. Confirm that the total regulator load includes every connected peripheral and that the selected ordering code retains the 3.3 V output rather than the 5.0 V family option.
अनुशंसित
Climate-Control LIN Interface
The TJA1028T/3V3/20/1J is suitable for a climate-control submodule that communicates over LIN and includes 3.3 V control electronics. Its integrated regulator can supply up to 70 mA, allowing a compact controller to use the same SOIC-8 device for bus communication and local power conditioning. The standardized 12 V LIN interface helps the module interoperate with other vehicle-network nodes. Validate the regulator headroom across the automotive supply range and keep the LIN routing separated from sensitive sensor paths to reduce coupled noise.
अनुशंसित
LIN Sensor Node
A remote LIN sensor node can use the TJA1028T/3V3/20/1J when the sensor interface needs a regulated 3.3 V rail and standardized bus connectivity. The LIN transceiver provides the physical-layer interface, while the low-dropout regulator supplies up to 70 mA for compatible sensor electronics. This can reduce the node's component count and PCB area compared with separate interface and regulator devices. Check the sensor's average and peak current, ensure the regulator has sufficient operating headroom, and follow the NXP recommendations for bus protection and layout.
अनुशंसित
Body Switch and Actuator Controller
The TJA1028T/3V3/20/1J can serve as the communications and local-supply block in a body switch or small actuator controller. A 3.3 V MCU or logic device can connect to the TXD and RXD pins, while the integrated regulator supplies up to 70 mA to suitable control circuitry. The LIN 2.0/2.1, SAE J2602 and ISO 17987-4:2016 compliance supports standardized 12 V vehicle-network behavior. The actuator itself may require more than 70 mA, so use a separate driver and preserve a defined power path for the load.
अनुशंसित
Compact Automotive ECU Peripheral
The TJA1028T/3V3/20/1J is appropriate for a peripheral ECU that needs LIN communications but has only a limited number of low-current loads. Integrating the regulator and transceiver in one 8-pin SOIC package can simplify routing and conserve board space. Its regulated output can reach 70 mA, making it useful for status logic, communication electronics and suitable sensor interfaces. Confirm the complete power budget, validate transient behavior over the 12 V automotive supply range, and use the manufacturer's pin table and application circuit to implement decoupling and bus protection correctly.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TJA1028T/3V3/20/1J — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TJA1028T/3V3/20 |
|---|---|---|
| Package | 8-pin SOIC | 8-pin SOIC |
| Brand | NXP Semiconductors | NXP Semiconductors |
| Regulated Output Voltage | 3.3 V | 3.3 V |
| Integrated Regulator Output Current | Up to 70 mA | Up to 70 mA |
| LIN Protocol Support | LIN 2.0, LIN 2.1, SAE J2602 | LIN 2.0, LIN 2.1, SAE J2602 |
| 12 V Standard Compliance | ISO 17987-4:2016 | ISO 17987-4:2016 |
| Bus Function | LIN transceiver with integrated voltage regulator | LIN transceiver with integrated voltage regulator |
मुख्य विशेषताएँ
- Combines LIN communications and a 3.3 V local supply (बनामTJA1028T/5V0/20/1)
- Uses the same 8-pin SOIC family package as the closest functional alternative (बनामTJA1028T/3V3/20)
- Supports standardized 12 V LIN physical-layer operation (बनामTJA1028T/3V3/20)
डिज़ाइन नोट्स
Budget the integrated regulator's full 70 mA rating against the combined 3.3 V load, including communication logic and any connected sensor interface. Do not power a high-current actuator from this regulator. Maintain the supply and return-current paths specified in the NXP datasheet, and verify dropout behavior at the minimum supply voltage before treating the output as a regulated 3.3 V rail.
Place the input and output capacitors associated with the integrated regulator as close as practical to their corresponding pins, using the capacitance and voltage ratings specified by NXP. Keep the LIN trace short and route it away from sensitive analog and high-speed digital paths. Confirm the exact eight-pin SOIC assignments from the manufacturer pin-description table before finalizing the footprint.
Do not treat the 3.3 V and 5.0 V TJA1028 ordering options as interchangeable. A 5.0 V version can place excessive voltage on a 3.3 V peripheral even if its SOIC-8 footprint is similar. Confirm the /3V3 ordering code, verify the complete regulator budget and compare every electrical limit and external-circuit requirement before substituting an alternative.
The LIN bus is a relatively slow automotive network, but its long harness can couple switching and transient energy into nearby circuitry. Follow the NXP recommendations for the LIN bus protection network, common-mode component and ground arrangement. Keep the protected bus connection compact and connect transient-current paths to the board's robust return structure rather than routing surge currents through sensitive logic traces.
अनुपालन जानकारी
RoHS-compliant status and AEC-Q100 qualification are identified in distributor product information. Other environmental declarations are not stated in the available product information.