Texas Instruments

TMS320C6455BGTZ - 1GHz Fixed-Point DSP | Texas Instruments

MPN: TMS320C6455BGTZ ✓ सक्रिय
697-FCBGA, 24 x 24 mm Package 1 GHz Speed 64-bit EMIFA Memory
न्यूनतम ऑर्डर मात्रा: 1 |

TMS320C6455BGTZ अवलोकन

Texas Instruments TMS320C6455BGTZ is a C64x+ fixed-point digital signal processor rated at 1 GHz and packaged in a 697-ball FCBGA measuring 24 x 24 mm. It delivers high-throughput parallel signal processing with a 64-bit EMIFA, 32-bit and 16-bit DDR2 memory interfaces, and 1 Gbps Ethernet connectivity. The processor combines controller-class programmability with the numerical throughput expected from an array processor.

A digital signal processor is a semiconductor optimized to execute mathematical operations in real time. Within the device hierarchy, the TMS320C6455 belongs to the DSP class, uses the C64x+ architecture, and integrates communication peripherals and external-memory interfaces with a programmable execution engine. This combination makes it suitable for systems that must acquire, transform, and transmit data at deterministic rates rather than perform general-purpose control work.

The 1 GHz operating point provides the basis for the processor's parallel arithmetic throughput. Texas Instruments describes the C6455 family as reaching 9600 million instructions per second, or 9600 16-bit multiply-accumulate operations per cycle, at 1.2 GHz. The exact performance conditions of the 1 GHz TMS320C6455BGTZ should be evaluated against the manufacturer datasheet, while the 90 nm fabrication process supports the device's combination of logic density, memory bandwidth, and high-speed peripherals.

Integrated connectivity reduces the need for external interface controllers. The 64-bit EMIFA provides a wide external-memory and peripheral interface, while support for 32-bit and 16-bit DDR2 memories allows systems to balance access width, capacity, and cost. The integrated 1 Gbps Ethernet interface supports networked audio, communications, industrial signal processing, and data-acquisition equipment without requiring a separate Ethernet PHY for every design.

Typical applications include professional audio and broadcast signal processing, industrial inspection, communications infrastructure, radar and sonar processing, medical signal analysis, and high-throughput network equipment. The combination of fixed-point arithmetic, DDR2 access, EMIFA expansion, and Ethernet is particularly useful when sample-rate conversion, filtering, spectral analysis, packet processing, and real-time control must coexist on one device.

PCB implementation requires careful treatment of the 697-ball FCBGA footprint, DDR2 routing, Ethernet signal integrity, reference voltages, and power delivery. The manufacturer datasheet and design guide should govern ball assignments, stack-up requirements, high-speed routing, decoupling, exposed-pad connections, and thermal design. DDR2 clocks and data lines require length-aware routing, while the Ethernet interface needs a controlled reference plane and compliant magnetics or PHY arrangement.

This product page combines the manufacturer architecture and ordering information, distributor availability details, interface characteristics, package information, and practical implementation guidance. It also distinguishes true package- and pin-compatible alternatives from broader functional choices, helping engineers assess replacement risk before committing a 697-FCBGA design to production.

के लिए ड्रॉप-इन विकल्प TMS320C6455BGTZ — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TMS320C6455BGTZ (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package.

Texas Instruments
Package: 697-pin FCBGA (CTZ), 24 x 24 mm
इसके साथ तुलना करें TMS320C6455BGTZ →

TMS320C6455BGTZA

✅ ड्रॉप-इन
📦 697-FCBGA (24 x 24 mm)
Same C6455 family and 697-FCBGA footprint; the explicit 1 GHz operating difference is 0%, while orderable suffix characteristics require review.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TMS320C6455BZTZ

✅ ड्रॉप-इन
📦 697-FCBGA (24 x 24 mm)
Same C6455 family, 1 GHz clock rating, and 697-FCBGA footprint; the stated clock difference is 0%, with the temperature-grade suffix remaining a qualification check.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TMS320C6455BCTZA

✅ ड्रॉप-इन
📦 697-FCBGA (24 x 24 mm)
Texas Instruments confirms the same package and pin numbering; the documented package and pin-layout difference is 0%, although the peak-solder-temperature suffix differs.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TMS320C6455DZTZA8

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 697-FCBGA (24 x 24 mm)
Same C6455 family and 697-FCBGA construction; the suffix and device-speed coding differ, but no verified package or pin-layout difference was identified.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

TMS320C6455BGTZ विशेषताएं

Product Type Fixed-point digital signal processor (DSP)
Processor Architecture C64x+
Target MPN Clock Rating 1 GHz
Family Maximum Clock Rating 1.2 GHz
Family Peak Throughput 9600 MIPS at 1.2 GHz
Process Technology 90 nm
External Memory Interface 64-bit EMIFA
DDR2 Memory Support 32-bit and 16-bit DDR2
Ethernet Speed 1 Gbps
Arithmetic Type Fixed-point
पैकेज 697-FCBGA, 24 x 24 mm
Ball Count 697 balls
माउंटिंग प्रकार Surface mount
RoHS स्थिति unknown
REACH Status unknown

TMS320C6455BGTZ 697-fcbga, 24 x 24 mm पिन कॉन्फ़िगरेशन गाइड

TMS320C6455BGTZ (697-fcbga, 24 x 24 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। पिन नंबरिंग, फ़ंक्शन और कनेक्शन आरेख निर्माता डेटाशीट में परिभाषित हैं। सटीक फुटप्रिंट और सोल्डरिंग दिशानिर्देशों के लिए इसे देखें।

TMS320C6455BGTZ के लिए 697-fcbga, 24 x 24 mm पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TMS320C6455BGTZ.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

TMS320C6455BGTZ के लिए उपयुक्त है 6 अनुप्रयोगs: Professional Audio Processing, Industrial Vibration Analysis, Communications Infrastructure, Radar and Sonar Processing, Medical Signal Analysis, Networked Test and Measurement.

🎧

Professional Audio Processing

The TMS320C6455BGTZ fits professional audio systems that combine high-rate fixed-point filtering with large sample buffers and networked control. Its 1 GHz C64x+ execution point supports parallel sample-processing work, while the 64-bit EMIFA and 32-bit or 16-bit DDR2 interfaces provide access to external working memory. The 1 Gbps Ethernet connection can carry synchronized control or monitoring traffic. In a professional converter, the processor might perform filtering, sample-rate conversion, mixing, and clock-domain coordination. The primary design trade-off is the substantial PCB complexity of a 697-ball FCBGA, high-speed DDR2 routing, and careful power delivery.

🏭

Industrial Vibration Analysis

The TMS320C6455BGTZ is well suited to industrial vibration and condition-monitoring equipment that must perform time-frequency analysis in real time. Its 1 GHz fixed-point architecture can accelerate filtering, windowing, FFT-oriented calculations, and feature extraction, while DDR2 supplies the bandwidth required for high-rate acquisition buffers. The 64-bit EMIFA permits connection to additional converters, capture logic, or FPGA-assisted acquisition stages. Ethernet can provide long-duration trend data and remote diagnostics. For deployment near motors or machinery, the exact temperature grade, isolation method, grounding strategy, and EMC design must be confirmed before production release.

🌐

Communications Infrastructure

The TMS320C6455BGTZ fits communications equipment requiring deterministic packet processing, signal transformation, and high-speed local memory access in a single processor. The C64x+ architecture can execute fixed-point filtering and protocol-adaptation tasks, while the 64-bit EMIFA and DDR2 interfaces support packet buffers and work areas. The integrated 1 Gbps Ethernet interface provides a direct path for network traffic and allows the design to consolidate multiple external functions. Implementation should isolate Ethernet differential routing, provide continuous reference planes, and synchronize DDR2 topology with the chosen memory device. For carrier-grade systems, lifecycle, temperature, and long-term sourcing requirements must also be evaluated.

✈️

Radar and Sonar Processing

The TMS320C6455BGTZ is appropriate for embedded radar, sonar, and beamforming systems where real-time fixed-point computation must occur close to high-rate data acquisition. The 1 GHz C64x+ execution point supports filtering, correlation, spectral analysis, and adaptive processing, while the wide EMIFA and DDR2 interfaces provide high-throughput data movement. The 64-bit external bus also permits connection to converters or FPGA front ends when the acquisition stage requires parallel conversion. For a sonar cabinet, Ethernet can carry time-stamped results for shore-side analysis. A ruggedized implementation must confirm temperature limits, clock accuracy, memory qualification, grounding, and protection against vibration or temperature-induced timing changes.

💊

Medical Signal Analysis

The TMS320C6455BGTZ can support medical monitoring and diagnostic signal-analysis systems that process multichannel waveform data with deterministic latency. Its 1 GHz fixed-point core is suitable for filtering, feature extraction, spectral analysis, and control algorithms, and the 64-bit EMIFA can connect to high-resolution converters or digital front ends. DDR2 provides capacity for dense acquisition buffers, while the 1 Gbps Ethernet interface supports encrypted transfer of results to centralized workstations. Medical designs require careful isolation, leakage-current review, EMC control, and segregation of analog and digital grounding. The device's exact electrical limits and the complete signal-chain requirements should be reviewed by the medical-device engineering team before clinical deployment.

🔧

Networked Test and Measurement

The TMS320C6455BGTZ fits networked test equipment that performs real-time analysis close to the instrument front end. Its 1 GHz fixed-point processing supports waveform conditioning, filtering, demodulation, and high-volume numerical operations, while the 64-bit EMIFA enables connection to converters, acquisition logic, and memory resources. The 1 Gbps Ethernet interface allows results, configuration data, and status information to be transferred over a standard network. This can reduce the amount of raw data sent to a remote workstation by moving analysis into the instrument. The implementation must preserve measurement accuracy through controlled clocking, short return paths, separate analog and digital power distribution, and careful DDR2 and Ethernet signal-integrity design.

What is the TMS320C6455BGTZ?
The TMS320C6455BGTZ is a Texas Instruments C64x+ fixed-point digital signal processor operating at 1 GHz in a 697-FCBGA package measuring 24 x 24 mm. According to the manufacturer product page, the C6455 family combines high-performance parallel signal processing with a 64-bit EMIFA, 32-bit and 16-bit DDR2 memory support, and 1 Gbps Ethernet. Its 90 nm process implementation targets high-throughput communications, industrial, audio, and data-acquisition systems.
What are the key specifications of TMS320C6455BGTZ?
The key specifications include a 1 GHz target clock, C64x+ fixed-point architecture, 64-bit EMIFA, 32-bit and 16-bit DDR2 support, 1 Gbps Ethernet, and a 697-FCBGA package measuring 24 x 24 mm. The manufacturer describes the wider C6455 family as reaching 9600 MIPS at 1.2 GHz and being implemented on a 90 nm process. These interfaces support parallel filtering, spectral analysis, communications, and real-time data movement.
What clock speed does TMS320C6455BGTZ use?
The TMS320C6455BGTZ is rated for 1 GHz operation. The wider TMS320C6455 family can operate up to 1.2 GHz, where Texas Instruments states a peak throughput of 9600 million instructions per second. Because the 1 GHz and 1.2 GHz points have different throughput, timing constraints and power behavior should be recalculated when moving between device speed grades rather than treating them as identical.
Where can I download the TMS320C6455BGTZ datasheet PDF?
The official TMS320C6455BGTZ technical documentation is available through Texas Instruments at https://www.ti.com/lit/gpn/TMS320C6455. The manufacturer datasheet contains the device architecture, ordering information, electrical characteristics, memory interfaces, Ethernet interface, pin assignments, and package details. Use the ball-assignment and pin-description sections when defining a new 697-FCBGA layout or reviewing an existing design.
Where can I find the TMS320C6455BGTZ pinout?
The TMS320C6455BGTZ pinout is published in the Texas Instruments TMS320C6455 datasheet and package documentation for the 697-FCBGA, 24 x 24 mm device. The BGA includes 697 balls and therefore requires a complete land pattern, including power, ground, signal, configuration, and reserved locations. Use the datasheet ball-assignment table and package outline rather than relying on a generic FCBGA drawing.
What memory interfaces are available on TMS320C6455BGTZ?
The TMS320C6455BGTZ provides a 64-bit EMIFA plus dedicated support for 32-bit and 16-bit DDR2 memory. The EMIFA is intended for external memory and peripheral connectivity, while DDR2 addresses higher-bandwidth working-memory requirements. The appropriate width and organization must match the memory system, and DDR2 routing must follow the manufacturer design guide for timing, topology, trace length, and reference-voltage implementation.
Does TMS320C6455BGTZ include Ethernet connectivity?
Yes, the TMS320C6455BGTZ includes Ethernet connectivity rated at 1 Gbps. This integrated interface can support networked signal-processing equipment in which real-time processing and packet transport are both required. Board implementation still requires careful control of the Ethernet differential pairs, reference plane, magnetics or PHY interface, and isolation requirements so that high-speed digital activity does not degrade signal integrity.
Where can I buy TMS320C6455BGTZ online?
The TMS320C6455BGTZ can be requested through the Request a Quote form on this page, which is the appropriate channel for current commercial availability, lot traceability, and volume requirements. The manufacturer lists the C6455 family on its official product page, while distributor records confirm an orderable 1 GHz, 697-FCBGA configuration. Submit the exact suffix when requesting supply so that temperature grade and packaging requirements remain unambiguous.
What is the price of TMS320C6455BGTZ?
Current commercial pricing for the TMS320C6455BGTZ is handled through the Request a Quote form on this page. The structured listing record tracks a previously observed unit-price reference, but it is not a quote and may not reflect available quantity, date-code traceability, or shipment terms. Use the form to request a current quotation for the exact 1 GHz, 697-FCBGA configuration and the required order quantity.
What is the lead time and stock status for TMS320C6455BGTZ?
Use the Request a Quote form on this page to confirm current stock, minimum order quantity, and lead time for the exact TMS320C6455BGTZ suffix. The device is a high-pin-count, 697-FCBGA processor, so procurement planning should account for the assembly capacity and component availability of the package rather than assuming generic catalog inventory. Include the required delivery schedule when requesting the quotation.
TMS320C6455BGTZ vs TMS320C6455BGTZA - which is better?
The TMS320C6455BGTZ and TMS320C6455BGTZA belong to the same C6455 family and use the 697-FCBGA package, but their orderable suffix characteristics must be checked before interchange. The BGTZA listing identifies the same fixed-point DSP and 1 Gbps Ethernet family, while the BGTZ ordering record identifies a 1 GHz device. Use the manufacturer ordering table to confirm temperature, lead-free, and moisture-sensitivity attributes for the exact production build.
When should I choose TMS320C6455BGTZ over a different C6455 speed grade?
Choose the TMS320C6455BGTZ when a design specifically requires its 1 GHz device rating and 697-FCBGA implementation. A 1.2 GHz family member may provide more throughput, but it also changes execution timing and power behavior, so existing timing constraints and thermal calculations must be revisited. The BGTZ is appropriate when its manufacturer-defined electrical limits, temperature grade, interface configuration, and lifecycle terms satisfy the system requirement.
What can replace TMS320C6455BGTZ?
The closest documented replacements are same-family Texas Instruments orderable parts using the 697-FCBGA footprint, including TMS320C6455BGTZA, TMS320C6455BZTZ, and TMS320C6455BCTZA. A replacement should not be selected solely by matching the package: verify clock rating, temperature range, supply voltages, EMIFA and DDR2 compatibility, Ethernet configuration, boot behavior, pin states, and device documentation. No verified cross-manufacturer drop-in equivalent was identified.
Is TMS320C6455BGTZ suitable for industrial signal processing?
The TMS320C6455BGTZ is suitable for industrial signal-processing systems that need deterministic fixed-point performance, external-memory bandwidth, and network connectivity. Its 1 GHz clock, 64-bit EMIFA, 32-bit and 16-bit DDR2 support, and 1 Gbps Ethernet support suit filtering, feature extraction, vibration analysis, machine vision preprocessing, and test systems. Confirm the exact temperature grade, EMC requirements, isolation strategy, and long-term availability for the deployed environment.
What design guidance applies to a TMS320C6455BGTZ DDR2 interface?
The TMS320C6455 design guidance requires a controlled DDR2 implementation because data and clock routing can directly limit memory reliability and performance. Follow the manufacturer topology, trace-length, reference-voltage, and topology requirements rather than treating the interface as ordinary digital routing. Keep DDR2 clocks away from switching nodes and sensitive analog references, provide local decoupling at the processor, and verify the complete stack-up with the PCB fabricator.
How should a 697-FCBGA TMS320C6455BGTZ PCB be designed?
A 697-FCBGA TMS320C6455BGTZ PCB requires exact land-pattern compliance, layer-stack planning, power-plane distribution, thermal management, and high-speed signal routing. The DDR2 and Ethernet interfaces impose the most sensitive routing constraints, while the large BGA also complicates thermal vias and solder-paste control. Use the manufacturer package outline, recommended PCB stack-up, power-decoupling plan, and reference schematic, then validate signal integrity and assembly capability before release.

के लिए इंजीनियरिंग संदर्भ डेटा TMS320C6455BGTZ — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose TMS320C6455BGTZ when the design requires a Texas Instruments C64x+ fixed-point processor with a documented 1 GHz operating point, 64-bit EMIFA, 32-bit and 16-bit DDR2 support, and integrated 1 Gbps Ethernet in a 697-FCBGA package. TMS320C6455BGTZA is the closest listed same-family option when its orderable temperature and environmental attributes meet the production requirement. TMS320C6455BZTZ provides another 1 GHz, 697-FCBGA configuration and is appropriate when its temperature grade and suffix characteristics satisfy the system specification. TMS320C6455BCTZA is useful when the same package and pin numbering are confirmed, although the peak-solder-temperature difference must be considered. TMS320C6455DZTZA8 should be selected only after its exact speed, electrical, and orderable attributes are verified. No cross-manufacturer drop-in replacement was confirmed, so an FPGA-based or software-driven redesign should not be treated as a pin-compatible substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद TMS320C6455BGTZA TMS320C6455BZTZ TMS320C6455BCTZA TMS320C6455DZTZA8
Package 697-FCBGA (24 x 24 mm) 697-FCBGA (24 x 24 mm) 697-FCBGA (24 x 24 mm) 697-FCBGA (24 x 24 mm) 697-FCBGA (24 x 24 mm)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Product Type Fixed-point DSP Fixed-point DSP Fixed-point DSP Fixed-point DSP Fixed-point DSP
Processor Architecture C64x+ C64x+ C64x+ C64x+ C64x+
Process Technology 90 nm 90 nm 90 nm 90 nm 90 nm
Pin Compatibility 697-FCBGA, 24 x 24 mm Same package and pin numbering Same family package and pin numbering Same package and pin numbering confirmed by Texas Instruments Same family package; verify against ordering table
Orderable Suffix Characteristics BGTZ BGTZA BZTZ BCTZA DZTZA8

मुख्य विशेषताएँ

  • Documented 1 GHz operating rating (बनामTMS320C6455DZTZA8)
  • Established same-package and same-pin-number path (बनामTMS320C6455BCTZA)
  • Direct 1 Gbps Ethernet integration (बनामTMS320C6455DZTZA8)
  • Wide external and working-memory connectivity (बनामTMS320C6455BZTZ)

डिज़ाइन नोट्स

Treat the 697-FCBGA footprint as a complete controlled layout rather than a generic BGA escape pattern. Follow the manufacturer's package outline and recommended PCB stack-up, preserve the specified solder-mask and paste geometry, and route escape traces according to the selected layer stack. Verify differential pair geometry, DDR2 topology, and power-plane connections with the PCB fabricator before artwork release, because small deviations can affect both assembly yield and high-speed signal integrity.

Follow the TMS320C6455 design guide for DDR2 and EMIFA implementation. Keep DDR2 clocks and data routing away from switching nodes and sensitive reference-voltage paths, maintain the prescribed topology, and use a continuous reference plane beneath high-speed routes. The design guide specifically calls for direct VREF routing with a minimum 20 mil trace and twice that clearance from switching signals; apply those constraints in the final stack-up and impedance calculations.

Estimate junction temperature from actual processor dissipation, ambient temperature, and the PCB's effective thermal resistance rather than relying only on the package's maximum rating. The large FCBGA requires a deliberate via-array and copper-plane strategy for heat removal from the central die area. Validate the thermal model in the assembled enclosure, including airflow, neighboring heat sources, and the effect of limited copper beneath the package, before selecting the production operating-temperature grade.

Validate the complete DDR2 and Ethernet interfaces with the final stack-up, connector or magnetics choices, and intended data rates. Check impedance, insertion loss, return loss, crosstalk, clock skew, and reference-plane continuity using engineering models or simulation before hardware testing. Place Ethernet magnetics or the external PHY interface according to the manufacturer reference design and keep high-speed switching currents away from analog reference and clock-generation circuitry.

Do not assume that every C6455 suffix is a production drop-in. The BGTZ, BGTZA, BZTZ, BCTZA, and DZTZA8 order codes can encode differences in temperature treatment, peak solder temperature, speed coding, or other procurement attributes. Before substitution, compare the complete ordering table, electrical limits, clock rating, boot and configuration behavior, supply voltages, memory compatibility, Ethernet implementation, and package drawing. A matching 697-ball footprint alone does not establish production equivalence.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product page and distributor records do not establish a specific environmental or automotive qualification for this exact orderable suffix. AEC-Q100 is not applicable unless the manufacturer identifies a qualified automotive variant.

डेटा सत्यापन तिथि: 2026-11-15 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

TMS320C6455BGTZ TMS320C6455BGTZ datasheet TMS320C6455BGTZ datasheet pdf TMS320C6455BGTZ pinout TMS320C6455BGTZ equivalent TMS320C6455BGTZ replacement TMS320C6455BGTZ cross reference TMS320C6455BGTZ footprint TMS320C6455BGTZ schematic TMS320C6455BGTZ price TMS320C6455BGTZ stock Texas Instruments TMS320C6455BGTZ TMS320C6455BGTZ vs TMS320C6455BGTZA 1 GHz 697-FCBGA DSP

संबंधित कंपोनेंट्स और शब्द

Texas Instruments TMS320C6455BGTZ TMS320C6455BGTZA TMS320C6455BZTZ TMS320C6455BCTZA TMS320C6455DZTZA8 TMS320C6455 C64x+ digital signal processor DSP fixed-point processor semiconductor 697-FCBGA FCBGA package 24 x 24 mm package surface-mount package 64-bit EMIFA DDR2 SDRAM 1 Gbps Ethernet 90 nm process technology 9600 MIPS industrial signal processing professional audio communications infrastructure medical signal analysis RoHS REACH AEC-Q100
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें