TMS320F241FNS - 16-Bit 20MHz DSP with 16KB Flash | Texas Instruments
MPN: TMS320F241FNS ✓ सक्रियTMS320F241FNS अवलोकन
A digital signal processor is a specialized microprocessor architecture optimized for repetitive mathematical operations such as filtering, Fourier analysis, control-loop calculations, and waveform processing. Unlike a general-purpose microcontroller, the TMS320F241FNS places multiply-accumulate operations, dedicated memory interfaces, and interrupt-driven peripherals around a highly parallel fixed-point CPU core. The 50 ns instruction cycle time listed for the TMS320F241 family supports predictable control-loop execution at a 20 MHz system clock.
Key device characteristics include 16 KB of flash memory, a 5 V supply, a 16-bit arithmetic datapath, and compatibility with the TMS320C2xx instruction set and development environment. The flash-based configuration consolidates program storage on the device, while the PLCC package provides a leaded, socket-compatible mechanical option for industrial control equipment and legacy upgrades. The package measures 24.23 mm by 24.23 mm according to the distributor listing.
TMS320F241FNS is suitable for motor-control loops, digital power conversion, industrial data acquisition, communications front ends, and embedded audio or measurement systems. Its fixed-point architecture allows designers to implement deterministic filters and control algorithms without floating-point hardware. The C2xx-compatible instruction set also supports source-level migration paths from earlier TMS320C25-family designs, while the flash-memory version simplifies standalone system deployment.
When designing a new board, verify the complete pin configuration, peripheral multiplexing, and clocking requirements in the manufacturer datasheet before layout release. The 68-pin PLCC footprint is not interchangeable with leaded PQFP packages, so socketed legacy systems and new SMT designs require different PCB land patterns. This page consolidates the device specifications, drop-in replacement candidates, and design guidance engineers need when planning a controlled substitution or repair.
के लिए ड्रॉप-इन विकल्प TMS320F241FNS — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं TMS320F241FNS (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Architecture, Mounting Type, On-Chip Flash Memory.
TMS320F241PZP
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TMS320F241PZ
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TMS320F241PG
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →TMS320F241FNSR
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TMS320F241FNSG4
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
TMS320F241FNS Maximum Ratings और Electrical Characteristics
| Device Type | 16-bit fixed-point digital signal processor |
| CPU Core | TMS320C2xx core |
| Architecture | C2xx DSP C2000 C24x |
| अधिकतम क्लॉक फ़्रीक्वेंसी | 20 MHz |
| Instruction Cycle Time | 50 ns |
| Arithmetic Word Length | 16 bit |
| सप्लाई वोल्टेज | 5 V |
| On-Chip Flash Memory | 16 KB |
| Flash Organization | 8K x 16 |
| Program Memory Type | Flash |
| Package Type | 68-PLCC |
| Package Dimensions | 24.23 mm x 24.23 mm |
| माउंटिंग प्रकार | Through-hole |
| ऑपरेटिंग तापमान रेंज | -40 °C to +125 °C |
| Instruction Set Compatibility | TMS320C2xx, source-compatible with TMS320C25 |
| Technology | High-performance static CMOS |
TMS320F241FNS 24.23 mm x 24.23 mm पिन कॉन्फ़िगरेशन गाइड
TMS320F241FNS (24.23 mm x 24.23 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: TMS320F241FNS.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
TMS320F241FNS के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Motor Control, Digital Power Conversion, Industrial Data Acquisition, Communications Signal Processing, Measurement and Instrumentation, Embedded Audio Processing.
Industrial Motor Control
The TMS320F241FNS fits deterministic digital motor-control loops because its TMS320C2xx core executes 16-bit fixed-point instructions with a 50 ns cycle time at a 20 MHz clock. The 16 KB flash configuration stores control code and tables on the device, while the 68-pin PLCC footprint matches legacy industrial controller hardware. A PWM-based motor drive can use the timer and interrupt resources for current sampling and duty-cycle updates. Before layout release, confirm PWM, capture, ADC, and digital I/O multiplexing in the datasheet because the 68 PLCC leads are heavily multiplexed. Verify that the selected temperature grade and legacy PLCC socket support the operating environment.
अनुशंसित
Digital Power Conversion
The TMS320F241FNS is appropriate for digital power-conversion controllers that calculate compensation terms and drive a switching stage through deterministic PWM outputs. Its 50 ns instruction cycle provides a 20 MHz execution basis for control-law updates, while 16-bit fixed-point arithmetic supports filter and compensator implementations without floating-point hardware. The 5 V supply and 68-pin PLCC package suit established industrial power-control boards. Confirm timer resolution, PWM dead-band support, analog-interface requirements, and pin multiplexing for the chosen topology. Use the datasheet electrical characteristics to set switching-node isolation and define the control-loop update rate.
अनुशंसित
Industrial Data Acquisition
The TMS320F241FNS can serve as the fixed-point processing core in an industrial acquisition system that performs filtering, scaling, and real-time spectral analysis. Its 16-bit datapath processes sampled data at a 20 MHz maximum clock, and the on-chip 16 KB flash consolidates program storage for standalone operation. A practical design can pair serial or parallel converters with digital filters, then pass results to a host processor. Pin assignment must be reviewed carefully because communication ports and general-purpose I/O share package leads. Confirm converter interface timing, interrupt latency, and memory-use requirements in the manufacturer datasheet before fixing the board layout.
अनुशंसित
Communications Signal Processing
The TMS320F241FNS is suitable for embedded modulation, filtering, and packet-processing functions where fixed arithmetic and predictable timing are central requirements. The TMS320C2xx core operates with a 50 ns instruction cycle at 20 MHz, enabling repeated multiply-accumulate-heavy filtering operations without a floating-point unit. Its 16 KB flash supports a self-contained communications controller, and the 68-pin PLCC package is common on established telecom and industrial control boards. Verify the availability and multiplexing of serial ports, timer pins, and interrupt sources for the selected protocol. Keep clock routing and switching supplies away from sensitive analog and communication interfaces.
अनुशंसित
Measurement and Instrumentation
The TMS320F241FNS can implement real-time measurement functions such as digital filtering, peak detection, calibration tables, and fast Fourier transform processing. Its 16-bit fixed-point architecture and 20 MHz clock are well matched to instruments that must return processed data within a fixed sampling interval. The flash-based TMS320F241FNS also simplifies firmware updates and standalone operation in laboratory or field equipment. For a new design, verify whether the application requires external RAM, and allocate the on-chip flash strictly for code and constants if no external memory interface is available. Use the datasheet pin table to assign display, communication, and measurement-control interfaces.
अनुशंसित
Embedded Audio Processing
The TMS320F241FNS can perform fixed-point filtering, mixing, and effects processing in an embedded audio system that prioritizes deterministic timing over general-purpose software flexibility. Its 50 ns instruction cycle supports tightly bounded sample-processing routines, while 16 KB of flash holds firmware and small coefficient tables. The device is especially relevant for upgrading legacy audio-control hardware built around the 68-pin PLCC footprint. Confirm serial audio-interface availability, sample-rate requirements, and external memory needs before assigning the design. If the system also handles network control, add a dedicated communications interface rather than stretching the DSP's multiplexed peripheral pins.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा TMS320F241FNS — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | TMS320F241PZP | TMS320F241PZ | TMS320F241PG | TMS320F241FNSR | TMS320F241FNSG4 |
|---|---|---|---|---|---|---|
| Package | 68-PLCC (24.23 x 24.23 mm) | 68-PLCC - same footprint | 68-PLCC - same footprint | 68-PLCC - same footprint | 68-PLCC - same footprint | 68-PLCC - same footprint |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Processor Architecture | 16-bit fixed-point TMS320C2xx | TMS320C2xx fixed-point | TMS320C2xx fixed-point | TMS320C2xx fixed-point | TMS320C2xx fixed-point | TMS320C2xx fixed-point |
| On-Chip Flash Memory | 16 KB (8K x 16) | 16 KB | 16 KB | 16 KB | 16 KB (8K x 16) | 16 KB (8K x 16) |
| Instruction Cycle Time | 50 ns | 50 ns | 50 ns | 50 ns | 50 ns | 50 ns |
| Supply Voltage | 5 V | 5 V | 5 V | 5 V | 5 V | 5 V |
| Programming Compatibility | TMS320C2xx / TMS320C25 source compatibility | TMS320C2xx family | TMS320C2xx family | TMS320C2xx family | TMS320C2xx family | TMS320C2xx family |
मुख्य विशेषताएँ
- Maintains the legacy 68-PLCC mechanical platform while providing flash-based program storage (बनामTMS320F240PQS)
- Deterministic 20 MHz fixed-point execution for legacy control upgrades (बनामTMS320F206PZA)
- Family-level source compatibility reduces legacy migration effort (बनामTMS320F241FNSR)
डिज़ाइन नोट्स
Design the board around the 68-lead PLCC footprint and preserve the manufacturer's lead pitch and solder-joint geometry. The device is not land-pattern compatible with PQFP or QFP packages, so an SMT conversion requires a new footprint, pin mapping, and thermal review. For repair-oriented designs, verify socket availability and pin-1 orientation before release because a mechanically similar footprint does not eliminate pin-function risk.
Route the device clock from a low-noise source and keep the clock trace short, continuous, and isolated from switching nodes and high-current power paths. Provide the required bypass capacitors at the supply pins with short ground returns, and follow the datasheet placement recommendations. Because several PLCC leads serve multiplexed peripheral functions, assign pins only after finalizing clocking and system-level operating modes.
Do not treat every C24x-family order code as an automatic substitute. Verify the exact MPN suffix, temperature range, silicon revision, qualification status, flash contents, and peripheral pin multiplexing before replacing a TMS320F241FNS in a deployed controller. Also confirm that the original firmware does not depend on device-specific peripherals or reserved locations outside the shared TMS320C2xx execution environment.
अनुपालन जानकारी
The available manufacturer and distributor listings do not state RoHS, REACH, halogen-free, or conflict-minerals status. The automotive qualification field is not applicable to the listed commercial industrial device, but no AEC-Q100 qualification is claimed.
