XC3S200-4TQ144C - 200K Gate Spartan-3 FPGA | Xilinx
MPN: XC3S200-4TQ144C ✗ जीवन की समाप्तिXC3S200-4TQ144C अवलोकन
An FPGA is a user-programmable semiconductor in the broader integrated-circuit hierarchy. Unlike a fixed-function microcontroller or application-specific integrated circuit, an FPGA combines configurable logic blocks, programmable interconnect, memory resources, and I/O blocks into a device whose digital behavior can be defined after manufacture. The Spartan-3 architecture is part of the FPGA and programmable-logic-device family, offering a practical balance between logic capacity, I/O availability, device cost, and design flexibility.
The XC3S200-4TQ144C provides 192 adaptive logic modules, which are organized into 4,320 logic cells. Its 97 available I/Os allow connections to external memory, sensors, communications transceivers, display controllers, and general-purpose digital peripherals. The verified family data identifies a maximum frequency of 725 MHz for the -4 device, while the exact AC timing limits for each I/O standard must be selected from the manufacturer datasheet. A 1.2 V core supply is typical for this 90 nm Spartan-3 generation, with auxiliary supply requirements depending on the selected I/O standards.
The TQFP-144 package is a surface-mount plastic quad flat package that offers substantially more I/O than a compact QFP, while remaining easier to assemble and inspect than a large BGA. Its 144 leads include power, ground, configuration, clock, and user I/O functions. Exact lead assignments, configuration pins, and dedicated behavior depend on the package pinout and device datasheet, so board designers should use the official pin table rather than infer assignments from another package variant.
Typical uses include industrial automation controllers, motor and motion-control logic, low-cost instrumentation, data acquisition, protocol bridging, educational FPGA platforms, and compact embedded systems that benefit from parallel hardware acceleration. The Spartan-3 device can implement finite-state machines, DSP-oriented datapaths, parallel-to-serial conversion, and interface control concurrently, reducing reliance on multiple fixed-function components.
The primary design consideration is timing closure. Engineers should establish the target clock, external memory interface, I/O standards, and pin assignments early, then use the Xilinx synthesis, implementation, and timing-analysis flow. Decoupling, ground-plane continuity, clock routing, and I/O standard compatibility should be reviewed against the manufacturer guidance before schematic release.
This page combines verified device specifications, commercial availability data, same-package replacement candidates, and practical selection guidance. It also distinguishes confirmed values from parameters that still require review in the complete manufacturer datasheet, helping engineers avoid treating incomplete distributor metadata as a complete design specification.
के लिए ड्रॉप-इन विकल्प XC3S200-4TQ144C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC3S200-4TQ144C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Adaptive Logic Modules, Core Supply Voltage, Lead-Free Status, Operating Temperature, User I/O.
XC3S200-4TQG144C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200-4TQ144I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC3S200-5TQG144C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200-4TQG144I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200-5TQ144C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC3S200-4TQ144C Maximum Ratings और Electrical Characteristics
| Device Type | Spartan-3 field-programmable gate array (FPGA) |
| System Gates | 200,000 gates |
| Logic Cells | 4,320 logic cells |
| Adaptive Logic Modules | 192 ALMs |
| User I/O | 97 I/Os |
| Core Supply Voltage | 1.2 V |
| Maximum Frequency | 725 MHz |
| Process Technology | 90 nm |
| पैकेज | 144-pin TQFP |
| ऑपरेटिंग तापमान | 0°C to 85°C |
| Speed Grade | -4 |
| Programmable Logic Type | Field-programmable gate array |
| माउंटिंग प्रकार | Surface mount |
| Lead-Free Status | Lead-free package marking reported in verified listing |
XC3S200-4TQ144C 144-pin tqfp पिन कॉन्फ़िगरेशन गाइड
XC3S200-4TQ144C (144-pin tqfp पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC3S200-4TQ144C.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC3S200-4TQ144C के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Automation Controller, Parallel Data Acquisition, Communication Protocol Bridging, Motor Control and Motion Logic, Low-Cost Instrumentation, FPGA Education and Rapid Prototyping.
Industrial Automation Controller
The XC3S200-4TQ144C fits industrial automation control because its 4,320 logic cells and 192 adaptive logic modules can implement multiple control tasks while 97 I/Os connect sensors, actuators, and field-bus transceivers. A practical design could divide the FPGA fabric among sequencing logic, interlocks, counter inputs, and communication framing without combining multiple small programmable controllers. The 1.2 V core supply and -4 speed grade provide a defined timing class, while the 144-pin TQFP exposes substantially more I/O than compact packages. The commercial 0°C to 85°C range must remain inside the enclosure’s specified temperature envelope. Industrial deployment also requires grounding, surge protection, EMC validation, and a controlled configuration-update procedure.
अनुशंसित
Parallel Data Acquisition
The XC3S200-4TQ144C is suitable for parallel data-acquisition front ends that require deterministic sampling, channel multiplexing, and digital preprocessing. Its 97 available I/Os can support multiple data buses, clocks, and control signals, while the 4,320 logic cells provide capacity for pipelines, counters, trigger logic, and calibration functions. The -4 grade is identified at 725 MHz in the verified family information, providing ample architectural headroom for common parallel ADC buses when timing constraints are met. Actual interface rates depend on the selected I/O standard, clock skew, trace topology, and FPGA timing closure. Analog front-end design remains separate and should account for input bandwidth, common-mode range, anti-alias filtering, and synchronization.
अनुशंसित
Communication Protocol Bridging
The XC3S200-4TQ144C can implement protocol conversion between serial links and a parallel processor or FPGA bus. Its programmable logic resources allow concurrent transmitter and receiver state machines, while 97 I/Os support data buses, control signals, clocks, and interrupt routing. A bridge design can translate framing, buffering data, checking CRC, and managing flow control without relying on a dedicated serial controller. The Spartan-3 family’s 97 I/O count and 1.2 V core supply are appropriate for a compact multi-interface module, but protocol timing must be checked against the selected I/O standard and transceiver characteristics. Signal-integrity work includes controlled-impedance routing, return paths, isolation from switching regulators, and verified termination.
अनुशंसित
Motor Control and Motion Logic
The XC3S200-4TQ144C is appropriate for deterministic motion-control assistance because parallel configurable logic can execute commutation sequencing, encoder decoding, position counting, and protection logic concurrently. Its 97 I/Os allow direct connection to position sensors, pulse-width-modulated command signals, fault inputs, and gate-driver control signals, while the -4 speed grade supports useful timing margin for these tasks. The device does not replace an analog motor driver or current-control loop, so designers should separate low-level power conversion from FPGA logic and include hardware overcurrent and shutdown paths. Timing analysis, fault-response latency, grounding, and safe-state behavior must be verified before connecting the controller to a machine.
अनुशंसित
Low-Cost Instrumentation
The XC3S200-4TQ144C fits compact laboratory and field instrumentation when flexible logic, multiple digital channels, and reconfigurable measurement logic are more valuable than maximum analog integration. The 4,320 logic cells can implement trigger logic, counters, calibration tables, waveform selection, and serial reporting, while 97 I/Os support sensors, displays, and communication transceivers. Its commercial 0°C to 85°C rating is suitable for controlled indoor equipment but not automatically sufficient for outdoor or extended industrial temperatures. The design must account for analog front-end accuracy separately, use low-noise references and supplies where required, and isolate high-impedance sensor inputs from digital switching activity.
अनुशंसित
FPGA Education and Rapid Prototyping
The XC3S200-4TQ144C is well suited to FPGA education, logic laboratory work, and rapid digital prototyping because it combines 4,320 logic cells, 192 adaptive logic modules, and 97 I/Os in a standard TQFP-144 package. Students can implement counters, finite-state machines, soft processors, basic processors, serial links, and parallel interfaces while retaining access to the same programmable-logic architecture used in production Spartan-3 designs. The 144-lead package is visually accessible for inspection and compatible with conventional prototyping techniques, although fine-pitch soldering still requires suitable equipment. Before power-up, students should study the complete supply, configuration, clock, and I/O pin assignments from the manufacturer documentation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC3S200-4TQ144C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC3S200-4TQG144C | XC3S200-4TQ144I | XC3S200-5TQG144C | XC3S200-4TQG144I | XC3S200-5TQ144C |
|---|---|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 | TQFP-144 |
| System Gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates | 200,000 gates |
| Logic Cells | 4,320 logic cells | 4,320 logic cells | 4,320 logic cells | 4,320 logic cells | 4,320 logic cells | 4,320 logic cells |
| User I/O | 97 I/Os | 97 I/Os | 97 I/Os | 97 I/Os | 97 I/Os | 97 I/Os |
| Core Supply Voltage | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V | 1.2 V |
| Speed Grade | -4 | -4 | -4 | -5 | -4 | -5 |
| Process Technology | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm | 90 nm |
मुख्य विशेषताएँ
- Matches the exact 200K Spartan-3 footprint and resource class (बनामXC3S200-4TQG144C)
- Allows a one-grade speed upgrade without changing the package (बनामXC3S200-5TQG144C)
- Supports a same-package industrial-grade ordering path (बनामXC3S200-4TQ144I)
- Provides 97 I/Os in a surface-mount 144-lead package (बनामXC3S200A-4VQG100I)
डिज़ाइन नोट्स
The verified device information confirms a 1.2 V core supply but does not provide the complete recommended power network. Before layout, obtain the manufacturer datasheet and confirm every core and I/O supply requirement, tolerance, sequencing condition, and current budget. Place required bypass capacitors adjacent to their assigned package pins, preserve short supply and ground return paths, and avoid sharing narrow return routes between switching and logic loads. Validate the power tree under worst-case I/O activity because a design that satisfies static core-current estimates can still fail when many outputs switch simultaneously.
Use the complete 144-pin manufacturer pin table to assign supplies, grounds, configuration pins, clock inputs, and user I/O. TQFP-144 has a 0.5 mm lead pitch, so solder-mask and paste design require careful package-specific clearance verification. Route clocks on short, continuous paths, avoid routing them over split power or ground planes, and provide a nearby low-impedance return path. Place decoupling and configuration circuitry where it can be reached by short traces without crossing high-speed signal routes. After assembly, inspect pin-1 orientation and solder bridging before applying power.
Do not substitute a related XC3S200 device solely because its gate count and package match. The verified candidates include -4 and -5 speed grades, different ordering suffixes, and different temperature-grade coding. A -5 part may alter timing and power characteristics, while a suffix change can affect qualification or procurement. Conversely, devices in 100-pin VQFP or 256-pin FBGA packages are not layout-compatible. Validate the exact ordering code, temperature range, configuration mode, exposed-power requirements, and full pin map before releasing a replacement to production.
Determine the target clock frequency and external interface standard before assigning I/O. Although the verified family data lists 725 MHz for the -4 device, practical timing margin depends on routing, loading, clock skew, and selected I/O type. Use the manufacturer timing report and post-route static timing analysis, and keep external clocks away from high-speed data and switching-regulator nodes. For source-synchronous interfaces, match output and input timing constraints, maintain continuous reference planes, and verify edge rates at the receiver rather than relying only on target-clock frequency.
अनुपालन जानकारी
The verified DigChip listing reports a lead-free marking for the device, but the provided results do not contain authoritative RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declarations. Compliance must be confirmed from the manufacturer documentation or the authorized distributor’s documentation for the exact orderable MPN.
