XC4VLX25-11SF363I - 24,192-Cell FPGA | AMD Xilinx
MPN: XC4VLX25-11SF363I ✗ जीवन की समाप्तिXC4VLX25-11SF363I अवलोकन
A field-programmable gate array, or FPGA, is a programmable logic device in which digital circuits are configured through a programmable logic array. Unlike a fixed-function application-specific integrated circuit, an FPGA can be reprogrammed during design, prototype, and production phases. Within the device hierarchy, the XC4VLX25-11SF363I belongs to the FPGA and CPLD class of programmable-logic semiconductors, specifically the Virtex-4 LX product family.
The XC4VLX25 device contains 10,752 adaptive logic modules organized into 2,688 configurable logic blocks. Its 1,296 Kbit of block RAM supports buffering, packet storage, lookup tables, and moderate-width data paths without relying on external memories. Forty-eight DSP slices accelerate multiply, accumulate, filtering, and signal-processing operations. The listed maximum operating frequency is 1,205 MHz, although practical system performance depends on logic depth, routing, memory interfaces, speed grade, and board constraints.
The SF363 package provides 240 user I/O in a 363-terminal FCBGA configuration measuring 17 mm by 17 mm. This high pin count supports wide parallel buses and multiple high-speed interfaces, while demanding careful ball-grid assignment, multilayer PCB construction, dense escape routing, and adequate thermal design. The device uses CMOS technology fabricated on a 90 nm process, combining substantial logic density with a mature programmable-logic architecture.
Typical uses include industrial control, telecommunications aggregation, instrumentation, signal processing, communications infrastructure, and embedded systems requiring programmable parallelism. The Virtex-4 LX fabric is especially useful where a design must balance logic density, block RAM, DSP resources, high I/O count, and field programmability without committing to a custom ASIC mask set.
A practical design constraint is power and signal integrity. The 1.2 V core and numerous high-speed I/O require multilayer power planes, local decoupling, controlled-impedance routing, and careful separation between clocks, data buses, and sensitive analog interfaces. Configuration storage, startup behavior, bank supply requirements, and the complete 363-ball pin map should be checked against the manufacturer datasheet before schematic capture or PCB release.
This product record combines the device identity, package characteristics, verified resource counts, same-package alternatives, pricing status, and engineering guidance into one implementation-oriented reference. It is intended to support footprint planning, replacement assessment, resource budgeting, and FPGA architecture selection before the design moves to detailed schematic and layout work.
के लिए ड्रॉप-इन विकल्प XC4VLX25-11SF363I — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC4VLX25-11SF363I (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Logic Cells, Device Type, Package, Speed Grade, User I/O.
XC4VLX25-11SFG363I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC4VLX25-11SF363IS2
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC4VLX25-12SFG363C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC4VLX25-10SFG363I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC4VLX25-10SFG363C
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC4VLX25-11SF363I Maximum Ratings और Electrical Characteristics
| Device Type | Virtex-4 LX Field-Programmable Gate Array (FPGA) |
| Logic Cells | 24,192 logic cells |
| Adaptive Logic Modules | 10,752 ALMs |
| Configurable Logic Blocks | 2,688 CLBs |
| Embedded Block RAM | 1,296 Kbit |
| DSP Slices | 48 slices |
| User I/O | 240 I/O |
| Maximum Operating Frequency | 1,205 MHz |
| Core Supply Voltage | 1.2 V |
| Process Technology | 90 nm CMOS |
| Speed Grade | -11 |
| पैकेज | 363-FBGA (FCBGA), SF363 package |
| Package Dimensions | 17 mm x 17 mm |
| माउंटिंग प्रकार | Surface Mount |
| Minimum Operating Temperature | -40 °C |
| Maximum Operating Temperature | +100 °C junction |
XC4VLX25-11SF363I 17 mm x 17 mm पिन कॉन्फ़िगरेशन गाइड
XC4VLX25-11SF363I (17 mm x 17 mm पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC4VLX25-11SF363I.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC4VLX25-11SF363I के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control and Automation, Telecommunications Aggregation, Digital Signal Processing, Test and Measurement Instrumentation, Embedded Instrumentation and Control, Communications Interface Consolidation.
Industrial Control and Automation
The XC4VLX25-11SF363I fits industrial controllers that coordinate sensors, motion systems, safety interlocks, and communications. Its 24,192 logic cells can support parallel control logic, while 1,296 Kbit of block RAM provides local storage for state machines, diagnostics, and buffered commands. The 240 available I/O simplify connections to digital field buses, encoder interfaces, and discrete I/O. The -11 speed grade and industrial operating range are relevant for equipment where deterministic control timing and extended-temperature operation are required. Final timing analysis must include the external transceiver delays, bus loading, isolation components, and worst-case I/O activity rather than relying only on the listed maximum frequency.
अनुशंसित
Telecommunications Aggregation
The XC4VLX25-11SF363I can serve as a programmable aggregation or protocol-processing element in telecommunications equipment. The available 240 I/O support parallel interfaces, and the FPGA fabric can implement packet classification, buffering, traffic shaping, and interface conversion without a custom ASIC. Its 1,296 Kbit of embedded block RAM is useful for line-rate buffering and small lookup structures, while 24,192 logic cells provide the parallelism needed for concurrent data paths. Deployment decisions must consider clock quality, transceiver characteristics, impedance control, thermal rise, and whether the selected board architecture requires greater memory bandwidth than the device's embedded resources can supply.
अनुशंसित
Digital Signal Processing
The XC4VLX25-11SF363I is suitable for fixed-point filtering, modulation, demodulation, spectrum analysis, and real-time data conditioning. Its 48 DSP slices provide dedicated multiply-accumulate resources, reducing the amount of general fabric consumed by arithmetic pipelines. Block RAM can hold sample buffers, filter coefficients, and lookup tables, allowing repeatable dataflow architectures with predictable throughput. The design should map each DSP block carefully because pin count alone does not determine processing rate. Designers should calculate samples per clock, cascade requirements, operand widths, and data-conversion latency, then compare the mapped result against the -11 timing target using post-layout timing analysis.
अनुशंसित
Test and Measurement Instrumentation
The XC4VLX25-11SF363I can implement the acquisition, sequencing, and analysis functions of programmable test equipment. The FPGA fabric can execute concurrent control and datapath logic, the 48 DSP slices can accelerate filtering or transform operations, and 240 I/O can connect test channels, trigger logic, status indicators, and external converters. Block RAM provides capture buffers and calibration tables without requiring a separate external FIFO for every channel. The main engineering concerns are deterministic triggering, clock jitter, converter interface timing, analog isolation, and thermal management. Pin assignment and I/O-standard selection should be completed against the exact package map before schematic release.
अनुशंसित
Embedded Instrumentation and Control
The XC4VLX25-11SF363I is appropriate for embedded systems requiring programmable hardware logic alongside fixed control functions. Its logic capacity supports state machines, protocol engines, timing generators, and supervisory logic, while the DSP slices accelerate measurement calculations and the block RAM stores calibration or configuration data. A high I/O count can reduce the number of external interface devices when board space is constrained. Because the FCBGA package is compact at 17 mm by 17 mm but contains 363 terminals, PCB density becomes significant. The design should account for via stacks, thermal vias, decoupling placement, configuration access, and programming or field-update requirements during hardware bring-up.
अनुशंसित
Communications Interface Consolidation
The XC4VLX25-11SF363I can consolidate multiple serial and parallel communication paths in network, storage, or data-acquisition equipment. Its 24,192 logic cells support protocol engines, CRC generation, packet assembly, and arbitration, while 1,296 Kbit of block RAM can buffer bursts between mismatched interface rates. The 240 I/O provide additional connectivity for byte-wide buses, status signals, and reference clocks. Practical deployment depends on whether the selected transceivers and internal interfaces operate within the FPGA's supported I/O standards and speed limits. Clocking topology, impedance-controlled routing, expansion-board reach, and return-path continuity should be modeled before committing to the fine-pitch FCBGA footprint.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC4VLX25-11SF363I — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC4VLX25-11SFG363I | XC4VLX25-11SF363IS2 | XC4VLX25-12SFG363C | XC4VLX25-10SFG363I |
|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD |
| Package | 363-FBGA (SF363) | 363-FBGA | 363-terminal package | 363-FBGA | 363-FBGA |
| Logic Cells | 24,192 | 24,192 | 24,192 | 24,192 | 24,192 |
| Speed Grade | -11 | -11 | -11 | -12 | -10 |
| Temperature Designator | I (industrial, -40 °C to +100 °C junction) | I (industrial) | I (industrial) | C (commercial) | I (industrial) |
मुख्य विशेषताएँ
- Higher speed grade than the -10 replacement candidates (बनामXC4VLX25-10SFG363I)
- Industrial temperature formulation rather than commercial (बनामXC4VLX25-12SFG363C)
- Closest documented Pb-Free same-speed candidate (बनामXC4VLX25-11SFG363I)
- Large programmable resource set for mixed control and datapath work (बनामXC4VLX25-11SF363IS2)
डिज़ाइन नोट्स
Treat the 363-pin FCBGA as a demanding fine-pitch layout. Follow the manufacturer's exact ball map, pad geometry, via recommendations, and layer-transition rules. Use a multilayer board with continuous ground and power planes, place local decoupling at the required supply balls, and provide thermal-via structures beneath the device where recommended. Do not release the layout from a generic BGA template because ball assignments, supply pins, configuration pins, and I/O banks are specific to the XC4VLX25 device and package marking.
Estimate the complete power budget rather than the core rail alone. Include core activity, I/O standards, I/O direction, expected data patterns, clock rates, configuration startup behavior, and the board environment. The 1.2 V core rail requires low-impedance distribution with effective high-frequency decoupling, while I/O supplies may require their own filtering. Check every voltage against the manufacturer power table and verify startup sequencing, current limits, and supply ramp requirements before testing the assembled board.
The XC4VLX25-11SFG363I, XC4VLX25-11SF363IS2, and -10 or -12 variants look similar in search results but are not automatically interchangeable. A package-compatible substitution can still change speed grade, temperature class, Pb-free status, ordering code, or package marking. Compare the full ordering information, verify the device identifier inside the FPGA implementation tool, regenerate the bitstream for the selected device, and rerun timing and pinout checks. Do not reuse a target bitstream without confirming that it is accepted by the substitute device.
Use the manufacturer pin assignments to select clock-capable pins and supported I/O standards. Keep clocks short and isolated from high-speed data, provide continuous return paths, and follow the PCB stack-up and impedance rules for every external interface. The 240 I/O can shorten board routing but also create simultaneous-switching noise on the power network. Validate interface eye masks, bus timing, skew, jitter, and power-plane noise in both simulation and hardware, using realistic clock and I/O activity patterns.
अनुपालन जानकारी
The related XC4VLX25-11SFG363I is listed as Pb-Free, but exact RoHS, REACH, halogen-free, conflict-minerals, and AEC-Q100 status for XC4VLX25-11SF363I could not be established from the available records.