AMD

XC4VSX35-10FF668C - 34,560-Cell Virtex-4 SX FPGA | AMD

MPN: XC4VSX35-10FF668C ✗ जीवन की समाप्ति
1.2 V Vdss 668-pin FCBGA, 27 mm × 27 mm Package 1028 MHz Speed
न्यूनतम ऑर्डर मात्रा: 1 |

XC4VSX35-10FF668C अवलोकन

The AMD XC4VSX35-10FF668C is a Virtex-4 SX field-programmable gate array with 34,560 logic elements, 15,360 adaptive logic modules, and 3,538,944 RAM bits. The device uses 90 nm CMOS technology, operates from a nominal 1.2 V core supply, and is packaged in a 668-pin FCBGA. Its -10 speed grade supports designs requiring deterministic high-performance programmable logic in a complex integrated package.

A field-programmable gate array is a semiconductor whose digital functions are configured after fabrication. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks, programmable interconnect, block RAM, dedicated arithmetic resources, and input/output resources on one device. The Virtex-4 SX family targets demanding communications, signal-processing, industrial, networking, and embedded systems where substantial parallel processing must be consolidated into a single device.

Key resources include 34,560 logic elements, 15,360 adaptive logic modules, and 3,538,944 RAM bits. The 668-pin FCBGA also exposes a large I/O perimeter, making it suitable for high-speed interfaces and systems requiring multiple external memory devices. The listed operating voltage range is 1.14 V to 1.26 V, while the -10 suffix identifies the device speed grade and the C suffix identifies the commercial temperature designation.

The XC4VSX35-10FF668C belongs to the 90 nm CMOS Virtex-4 SX generation. Its architecture combines programmable logic with DSP-oriented resources, enabling parallel filtering, protocol handling, control logic, and data movement within one FPGA. At 668 pins, the package is substantially larger than modern FPGAs, but that pin count provides extensive interface capacity for demanding board-level designs.

Typical applications include telecommunications line cards, industrial control equipment, network interface controllers, high-throughput data acquisition, embedded video processing, and test-and-measurement systems. Its combination of logic capacity, on-chip RAM, DSP resources, and a large I/O interface supports designs that must process several data streams concurrently without relying on multiple programmable devices.

Engineering around this legacy package requires careful attention to BGA layout, via-in-pad or through-via fanout, multilayer board constraints, power-plane continuity, and thermal paths. A 668-pin FCBGA also demands assembly inspection methods suited to fine-pitch arrays. The device should be matched to the exact speed-grade, package, and temperature ordering codes required by the original design rather than substituted solely by logic-cell count.

This product page combines device specifications, ordering-code distinctions, package guidance, and verified drop-in alternatives. It also identifies which electrical, pinout, environmental, and assembly attributes require confirmation with the manufacturer before an engineering change is approved.

के लिए ड्रॉप-इन विकल्प XC4VSX35-10FF668C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC4VSX35-10FF668C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package Type, Speed Grade, Process Technology, Device Type, Logic Cells.

AMD
Package Type: 668-pin FCBGA
Device Type: Virtex-4 SX field-programmable gate array
Logic Cells: 23,040 cells
इसके साथ तुलना करें XC4VSX35-10FF668C →
AMD
Package Type: 668-ball FCBGA
Speed Grade: -10 grade
Device Type: Virtex-4 SX field-programmable gate array
इसके साथ तुलना करें XC4VSX35-10FF668C →
AMD
Process Technology: CMOS
Device Type: Virtex-4 SX field-programmable gate array
Logic Cells: 34,560 cells
इसके साथ तुलना करें XC4VSX35-10FF668C →
AMD
Package Type: 668-pin FCBGA
Speed Grade: -11
Logic Cells: 34,560 cells
इसके साथ तुलना करें XC4VSX35-10FF668C →
AMD
Package Type: FCBGA-668
Speed Grade: -11
Device Type: Virtex-4 SX field-programmable gate array
इसके साथ तुलना करें XC4VSX35-10FF668C →

XC4VSX35-10FFG668C

✅ ड्रॉप-इन
📦 668-pin FCBGA
Same Virtex-4 SX device, -10 speed grade, and 668-pin package; G designation changes the lead-free ordering code.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC4VSX35-10FF668I

✅ ड्रॉप-इन
AMD
📦 668-pin FCBGA
Virtex-4 SX field-programmable gate array · 34,560 cells · 3,840 CLBs · 3,538,944 bits · 1,028 MHz · 1.14 V to 1.26 V · -40 °C to +100 °C · -10

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC4VSX35-11FFG668C

✅ ड्रॉप-इन
📦 668-pin FCBGA
Same Virtex-4 SX device and 668-pin package; -11 replaces the -10 speed grade and G adds the lead-free ordering code.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC4VSX35-11FFG668I

✅ ड्रॉप-इन
📦 668-pin FCBGA
Same Virtex-4 SX device and 668-pin package; -11 changes speed grade, G changes lead-free construction, and I changes temperature class.

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

XC4VSX35-11FF668C

✅ ड्रॉप-इन
AMD
📦 668-pin FCBGA
Virtex-4 SX field-programmable gate array (FPGA) · 34,560 cells · 3,840 · 448 I/O · 1205 MHz · 90 nm CMOS · 1.2 V · -11

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC4VSX35-11FF668I

✅ ड्रॉप-इन
AMD
📦 668-pin FCBGA
Virtex-4 SX field-programmable gate array · 34,560 cells · 3,840 CLBs · 448 I/O · 668 pins · FCBGA-668 · 90 nm CMOS · 1.2 V nominal

कीमत के लिए संपर्क करें

डेटाशीट देखें →

XC4VSX35-10FF668C Maximum Ratings और Electrical Characteristics

Device Type Virtex-4 SX field-programmable gate array (FPGA)
Logic Elements 34,560 cells
Adaptive Logic Modules 15,360 ALMs
Total RAM Bits 3,538,944 bits
Process Technology 90 nm CMOS
Nominal Core Supply Voltage 1.2 V
Operating Supply Voltage Range 1.14 V to 1.26 V
Internal Frequency 1028 MHz
Speed Grade -10
Temperature Designation Commercial, 0°C to 85°C
Package Type 668-pin FCBGA, 27 mm × 27 mm
Package Pin Count 668 pins
माउंटिंग प्रकार Surface-mount ball grid array
Programming Field-programmable digital logic

XC4VSX35-10FF668C 668 pins पिन कॉन्फ़िगरेशन गाइड

XC4VSX35-10FF668C (668 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

XC4VSX35-10FF668C के लिए 668 pins पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC4VSX35-10FF668C.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

XC4VSX35-10FF668C के लिए उपयुक्त है 6 अनुप्रयोगs: Telecommunications Line-Card Control, Industrial Automation and Motion Control, High-Throughput Data Acquisition, Network Interface and Packet Processing, Embedded Video Processing, Test and Measurement Instrumentation.

🌐

Telecommunications Line-Card Control

The XC4VSX35-10FF668C fits telecommunications line-card designs that combine protocol handling, traffic steering, monitoring, and control logic. Its 34,560 logic elements and 3,538,944 RAM bits provide substantial parallel capacity, while the 668-pin FCBGA exposes enough package connections for external memories and high-speed interfaces. A typical implementation can place packet classification, framing, buffering, and supervisory logic in one programmable device. The principal engineering consideration is power delivery: the listed core operating range of 1.14 V to 1.26 V must remain stable across the 27 mm by 27 mm BGA, especially when high-speed memory and serial interfaces are active.

🏭

Industrial Automation and Motion Control

The XC4VSX35-10FF668C is suitable for industrial automation systems that coordinate motion, sequencing, interlocks, diagnostics, and real-time I/O. Its 15,360 adaptive logic modules and large RAM capacity allow parallel control pipelines to be implemented without splitting the design across several devices. The 668-pin FCBGA supports broad external connectivity to sensors, actuators, communications transceivers, and memory. For commercial-temperature equipment, the device's 0°C to 85°C designation matches many indoor industrial envelopes. If the controller must operate in a wider temperature range, the corresponding industrial-grade ordering code should be selected and the power, clock, and I/O margins reviewed as a complete system.

🖥️

High-Throughput Data Acquisition

The XC4VSX35-10FF668C can serve as the central digital engine in a high-throughput data-acquisition system. Parallel ADC interfaces, buffering, filtering, trigger logic, and data packing can be placed within its 34,560 logic elements, while 3,538,944 RAM bits support local data storage and pipelining. The large 668-pin package provides the necessary pin count for parallel converters, memory devices, clocks, and control signals. Design work should focus on source-synchronous routing, clock jitter budgets, input threshold selection, and termination rather than treating resource count alone as a performance guarantee. The nominal 1.2 V core rail also requires careful plane segmentation and decoupling around the BGA.

🌐

Network Interface and Packet Processing

The XC4VSX35-10FF668C is well suited to network-interface controllers that perform packet classification, queue control, header processing, and traffic shaping. Its substantial programmable logic permits multiple parallel lanes, while the on-chip RAM supports buffering and descriptor management. The 668-pin FCBGA is appropriate for designs requiring external packet memory and several high-speed board interfaces. Implementation decisions should account for source-synchronous I/O timing, clock-domain crossing, and receive-buffer depth. Although the -10 grade is adequate for many designs, systems with tighter timing margins should compare the -11 family option and verify the complete design with the appropriate timing constraints.

📺

Embedded Video Processing

The XC4VSX35-10FF668C can implement embedded video pipelines containing pixel transport, color processing, thresholding, motion detection, and display-interface control. Parallel datapaths benefit from the device's 34,560 logic elements, while the 3,538,944 RAM bits can support line buffers and frame-level processing. Its 668-pin FCBGA provides the external connectivity needed for video memories, sensors, displays, and control interfaces. Because video designs can move data at high lane rates, PCB trace matching, reference-clock routing, power distribution, and I/O-standard settings are central to reliable operation. The large package also demands careful assembly planning, including BGA void control and inspection appropriate to fine-pitch devices.

🔧

Test and Measurement Instrumentation

The XC4VSX35-10FF668C is applicable to test-and-measurement instruments that combine pattern generation, acquisition, digital signal processing, calibration, and front-panel control. Its programmable logic and RAM capacity allow multiple measurement channels to share one FPGA while retaining flexible timing and triggering behavior. The extensive 668-pin package supports external data converters, memory, clock sources, and communication links. A robust implementation should separate high-speed and sensitive routing, use disciplined clocking, and verify channel-to-channel skew at the system level. For instrumentation with an extended environmental envelope, the industrial-temperature same-package ordering option may be preferable to the commercial-grade target.

अनुशंसित उत्पादों का सारांश

XC4VSX35-10FFG668C Same-package lead-free ordering alternative उपयोग में: Telecommunications Line-Card Control, High-Throughput Data Acquisition, Embedded Video Processing XC4VSX35-10FF668I AMD उपयोग में: Telecommunications Line-Card Control, Industrial Automation and Motion Control, Test and Measurement Instrumentation XC4VSX35-11FFG668C Higher-speed-grade same-package option उपयोग में: Industrial Automation and Motion Control, Network Interface and Packet Processing XC4VSX35-11FF668C AMD उपयोग में: High-Throughput Data Acquisition, Embedded Video Processing XC4VSX35-11FFG668I Same-package higher-speed industrial alternative उपयोग में: Network Interface and Packet Processing, Test and Measurement Instrumentation
What is the XC4VSX35-10FF668C?
The XC4VSX35-10FF668C is an AMD Virtex-4 SX FPGA with 34,560 logic elements, 3,538,944 RAM bits, and a 668-pin FCBGA package. According to the manufacturer device information, it uses 90 nm CMOS technology and a nominal 1.2 V core supply. It is intended for programmable digital systems requiring substantial logic, memory, signal-processing, and external interface resources.
Where can I download the XC4VSX35-10FF668C datasheet and pinout information?
Download the Virtex-4 package pinout files and device documentation from AMD's official package-resource page linked on this product page. The device uses a 668-pin FCBGA, so a complete board design should use the official Virtex-4 package drawing, pinout table, and escape-routing guidance rather than a generic BGA footprint. The manufacturer resource also provides the appropriate basis for PCB stack-up and assembly planning.
XC4VSX35-10FF668C vs XC4VSX35-10FFG668C - which one should I use?
Both devices use the same 668-pin FCBGA and the same -10 speed grade, with the G designation identifying the lead-free package version. The XC4VSX35-10FFG668C is listed as Pb-Free, while the XC4VSX35-10FF668C is the non-G ordering code. For a new lead-free assembly, the G version may be preferable, but the exact ordering requirements should govern the final selection.
XC4VSX35-10FF668C vs XC4VSX35-11FFG668C - which is better for a timing-critical design?
The XC4VSX35-10FF668C is the -10 speed-grade device, while the XC4VSX35-11FFG668C is identified as the -11 speed grade in the same Virtex-4 family. The -10 and -11 suffixes identify different performance grades rather than incompatible functional devices. A timing-critical system should use the manufacturer's speed-grade comparison and verify whether its constraints require a faster grade or can be met by the original -10 device.
When should I choose XC4VSX35-10FF668C over XC4VSX35-10FF668I?
Choose the XC4VSX35-10FF668C for a commercial-temperature design whose operating range is 0°C to 85°C. The XC4VSX35-10FF668I is the industrial-temperature ordering option in the same 668-pin package family. Select the I variant when the product must operate across the industrial junction-temperature range and the original system documentation specifies that qualification and temperature grade.
Is XC4VSX35-10FF668C suitable for industrial control systems?
The XC4VSX35-10FF668C is suitable when its commercial 0°C to 85°C range matches the enclosure and component-temperature requirements. For industrial systems exposed to wider ambient temperatures, the XC4VSX35-10FF668I or another explicitly industrial-temperature ordering option is generally more appropriate. Temperature grade, power integrity, and system availability should be reviewed together rather than treating the FPGA as an unlimited-temperature device.
What can replace the XC4VSX35-10FF668C?
The closest order-code alternatives include the XC4VSX35-10FFG668C, XC4VSX35-10FF668I, XC4VSX35-11FFG668C, XC4VSX35-11FFG668I, and XC4VSX35-11FF668C. Each uses the 668-pin FCBGA family and the same Virtex-4 SX device basis, but speed-grade, temperature-grade, and lead-free distinctions may change qualification. Confirm the bitstream constraints, timing grade, PCB mapping, and temperature requirements before substitution.
Can XC4VSX35-10FFG668C replace XC4VSX35-10FF668C without PCB changes?
The XC4VSX35-10FFG668C is a pin-compatible package-order alternative for many 668-pin FCBGA layouts because it retains the same device family, speed grade, and package. The meaningful distinction is that the G version is identified as Pb-Free, while the target MPN is the non-G code. Approval still requires checking the manufacturer ordering guide, assembly requirements, and whether the original drawing explicitly prohibited the G variant.
Where can I buy XC4VSX35-10FF668C and what is its current price?
Use the Request a Quote form on this page to ask about XC4VSX35-10FF668C availability, price, quantity, and delivery. The form lets the buyer submit the exact MPN and package requirements for a current quotation. Because this is a mature legacy FPGA, confirm lifecycle, date-code, inspection, and traceability requirements along with the commercial terms.
What is the lead time for XC4VSX35-10FF668C?
The current lead time for XC4VSX35-10FF668C should be confirmed through the Request a Quote form on this page. Lead time can depend on stock, package condition, date-code requirements, traceability, and inspection level for a mature 668-pin FCBGA device. Supply the required quantity and inspection terms with the inquiry so the quotation reflects the actual procurement requirement.
Is XC4VSX35-10FF668C in stock?
Request current XC4VSX35-10FF668C stock confirmation using the Request a Quote form on this page. The target is a mature Virtex-4 SX device in a large FCBGA package, so physical availability may vary by lot and condition. Include acceptable date codes, traceability documents, X-ray inspection, and other quality requirements in the request.
What are the key specifications of XC4VSX35-10FF668C that engineers should know?
The XC4VSX35-10FF668C combines 34,560 logic elements, 15,360 adaptive logic modules, and 3,538,944 RAM bits in a 668-pin FCBGA. It is manufactured using 90 nm CMOS technology, operates from 1.14 V to 1.26 V, and is identified by the -10 speed grade and commercial-temperature designation. These figures define its capacity, power architecture, and board-level implementation requirements.
How many I/O pins does the XC4VSX35-10FF668C package have?
The XC4VSX35-10FF668C uses a 668-pin FCBGA package. The complete pin count includes power, ground, configuration, clock, and user I/O balls, so it should not be interpreted as 668 user I/O signals. Use AMD's Virtex-4 package pinout files to distinguish fixed-function balls from programmable user I/O and to generate the board-level ball map.
What is the best AMD equivalent for the XC4VSX35-10FF668C?
The best AMD alternative depends on which qualification dimension must change while preserving the PCB. The XC4VSX35-10FFG668C preserves the -10 speed grade and 668-pin package while using the lead-free G designation. The XC4VSX35-10FF668I preserves the speed grade and package but changes to the industrial temperature class. The appropriate choice is determined by assembly and environmental requirements, not logic capacity alone.
Does XC4VSX35-10FF668C require special PCB layout for its 668-pin FCBGA?
Yes, the XC4VSX35-10FF668C requires a layout designed for the manufacturer's 668-pin FCBGA package. Use the official package dimensions, ball map, via recommendations, and reference escape-routing data when defining the PCB stack-up. Pay particular attention to power and ground distribution, decoupling connections, thermal relief, and assembly-process compatibility for the fine-pitch ball array.

के लिए इंजीनियरिंग संदर्भ डेटा XC4VSX35-10FF668C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the XC4VSX35-10FF668C when an existing design specifically requires the commercial-temperature, -10-speed, non-G Virtex-4 SX ordering code in a 668-pin FCBGA. Select XC4VSX35-10FFG668C when a lead-free assembly is required and the original ordering restriction permits that package ordering code. Select XC4VSX35-10FF668I when the same -10 performance is required in an industrial-temperature product. Use an -11 option only when the design needs a different timing grade and the bitstream, timing analysis, and qualification have been reviewed. These alternatives preserve the 668-pin package family, but temperature grade, speed grade, and lead-free construction are meaningful ordering differences. For any substitution, compare the complete AMD ordering guide against the original bill of materials, PCB documentation, and qualification records before approving production use.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद XC4VSX35-10FFG668C XC4VSX35-10FF668I XC4VSX35-11FFG668C XC4VSX35-11FFG668I XC4VSX35-11FF668C XC4VSX35-11FF668I
Package 668-pin FCBGA, 27 mm × 27 mm 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA 668-pin FCBGA
Brand AMD AMD AMD AMD AMD AMD AMD
Device Family Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX Virtex-4 SX
Speed Grade -10 -10 -10 -11 -11 -11 -11
Temperature Designation Commercial, 0°C to 85°C Commercial Industrial Commercial Industrial Commercial Industrial
Lead-Free Ordering Code No G suffix G suffix, listed as Pb-Free No G suffix G suffix G suffix No G suffix No G suffix

मुख्य विशेषताएँ

  • Commercial-temperature -10 ordering code with full 34,560-cell capacity (बनामXC4VSX35-10FFG668C)
  • Matches the original commercial 0°C to 85°C temperature class (बनामXC4VSX35-10FF668I)
  • Uses the established -10 speed grade rather than the -11 grade (बनामXC4VSX35-11FFG668C)
  • Combines 34,560 logic elements with 3,538,944 RAM bits (बनामXC4VSX35-11FF668C)

डिज़ाइन नोट्स

Use AMD's Virtex-4 package and pinout resources for the 668-pin FCBGA rather than deriving the land pattern from a generic 668-ball library. The package dimensions, ball coordinates, power-ball assignments, and escape-routing requirements must be treated as a single controlled set. Confirm the PCB stack-up, finished hole and pad geometry, solder-mask definition, and assembly process against the official package drawing before releasing fabrication data.

The listed core operating range is 1.14 V to 1.26 V, with a nominal 1.2 V supply. Plan the core and auxiliary rails as separate distribution networks where the design permits, and place high-frequency decoupling close to the associated BGA balls. Use the manufacturer power-guidance and configuration requirements to determine whether each ball requires a via, via-in-pad, or fanout structure. Validate voltage at the device under worst-case clock, I/O, and temperature conditions.

Do not route memory or high-speed serial interfaces through arbitrary BGA escape paths. Match external clock and data lines according to the interface's rise-time and skew requirements, keep reference clocks away from noisy switching nodes, and use symmetrical via structures for length matching. The dense 1.00 mm-class FCBGA also benefits from uninterrupted reference planes and a stack-up that minimizes layer-transition loss.

A 668-ball FCBGA can create a concentrated thermal path even though it exposes many external connections. Use the manufacturer's thermal model and board assumptions to size exposed copper and thermal vias. Mechanical, power, and signal-routing decisions must be balanced so that added vias do not compromise plane continuity or assembly yield. Evaluate junction temperature at the highest expected ambient temperature and sustained maximum device activity.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The XC4VSX35-10FFG668C is identified as Pb-Free, but that statement was not applied to the non-G target ordering code. No target-specific RoHS, REACH, AEC-Q100, halogen-free, or conflict-minerals declaration was established.

डेटा सत्यापन तिथि: 2026-11-14 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

xc4vsx35 datasheet XC4VSX35-10FF668C datasheet XC4VSX35-10FF668C pinout XC4VSX35-10FF668C datasheet pdf AMD XC4VSX35-10FF668C XC4VSX35-10FF668C equivalent XC4VSX35-10FF668C replacement XC4VSX35-10FF668C cross reference XC4VSX35-10FF668C vs XC4VSX35-10FFG668C XC4VSX35-10FF668C FCBGA footprint XC4VSX35-10FF668C application circuit XC4VSX35-10FF668C price XC4VSX35-10FF668C stock XC4VSX35 34560 logic elements

संबंधित कंपोनेंट्स और शब्द

AMD XC4VSX35-10FF668C XC4VSX35-10FFG668C XC4VSX35-10FF668I XC4VSX35-11FFG668C XC4VSX35-11FFG668I XC4VSX35-11FF668C XC4VSX35-11FF668I Virtex-4 SX FPGA field-programmable gate array programmable logic adaptive logic module logic element block RAM FCBGA-668 surface-mount ball grid array 90 nm CMOS core supply voltage speed grade temperature grade lead-free package RoHS REACH AEC-Q100
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें