XC5VLX85-3FFG676C - 85K LX FPGA, 676-BBGA | Xilinx
MPN: XC5VLX85-3FFG676C ✗ जीवन की समाप्तिXC5VLX85-3FFG676C अवलोकन
An FPGA is a programmable semiconductor whose digital circuits are defined through a configuration bitstream rather than fixed mask geometry. The Virtex-5 LX family occupies the FPGA hierarchy below an application-specific integrated circuit and above conventional fixed logic. Its combination of logic resources, high-speed serial connectivity, general-purpose input/output, embedded memory, and dedicated processing blocks makes it useful where product functionality must evolve faster than fixed logic can be respun.
The XC5VLX85-3FFG676C is identified in product listings as an FPGA with 82,944 logic cells, 440 I/O, and a 676-BBGA or FCBGA package. Its large I/O count allows simultaneous connections to external memory, parallel buses, clocks, data converters, and control peripherals. The 676-ball package also supports dense board layouts where a lower-pin-count package would require unacceptable routing congestion or a multilayer interconnect beyond practical PCB limits.
The -3 device is intended for designs requiring the higher performance grade of the XC5VLX85 family. Speed-grade changes affect the timing characteristics and therefore the maximum operating frequencies that a given design can achieve after implementation. The exact timing limits, internal block quantities, voltage requirements, and configuration parameters must be confirmed in the AMD/Xilinx Virtex-5 product documentation for the selected design and package.
Typical applications include high-throughput digital signal processing, network-interface and packet-processing equipment, industrial control, test and measurement, communications infrastructure, and embedded systems requiring extensive parallel I/O. In these systems, programmable logic can implement parallel interfaces, state machines, buffer management, packet parsing, clocking, and protocol conversion while retaining field-updatable behavior.
The principal engineering consideration is package-level design planning. A 676-ball FCBGA requires careful ball assignment, power distribution, decoupling, via-in-pad or fanout construction, and assembly-process coordination. Pin compatibility should not be inferred from the family name alone; engineers should compare the official package pinout files, voltage assignments, configuration pins, and board constraints before substituting any device.
This page combines the exact catalog identity of the XC5VLX85-3FFG676C with package, I/O, logic-cell, sourcing, alternative, and design-placement guidance. It also distinguishes genuine same-footprint family alternatives from broader FPGA migrations that require different packages, pin assignments, power systems, or design recompilation.
के लिए ड्रॉप-इन विकल्प XC5VLX85-3FFG676C — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC5VLX85-3FFG676C (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Package, I/O Count, Logic Cells, Process Technology.
XC5VLX85-1FFG676C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC5VLX110-1FFG676I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC5VLX85-2FFG676C
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XC5VLX85-3FFG676C Maximum Ratings और Electrical Characteristics
| Device Type | Virtex-5 LX field-programmable gate array (FPGA) |
| Logic Cells | 82,944 logic cells |
| Input/Output Count | 440 I/O |
| पैकेज | 676-pin FCBGA |
| Package Designation | FFG676 |
| Package Form | 676-BBGA / FCBGA |
| Device Family | Virtex-5 LX |
| Speed Grade | -3 grade |
| Programmable Logic Type | Field-programmable gate array |
| माउंटिंग प्रकार | Surface mount |
| Package Technology | Flip-chip ball grid array |
XC5VLX85-3FFG676C flip-chip ball grid array पिन कॉन्फ़िगरेशन गाइड
XC5VLX85-3FFG676C (flip-chip ball grid array पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC5VLX85-3FFG676C.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC5VLX85-3FFG676C के लिए उपयुक्त है 6 अनुप्रयोगs: Network Packet Processing, Industrial Control Systems, Digital Signal Processing, Test and Measurement Equipment, Communications Infrastructure, Embedded Video Processing.
Network Packet Processing
The XC5VLX85-3FFG676C fits network equipment requiring extensive parallel connectivity and configurable datapath logic. Its 440 I/O provide ample external interfaces for packet buffers, PHY or SerDes links, control processors, and status or management signals, while 82,944 logic cells can support parsing, classification, queuing, and traffic shaping. The -3 speed grade is preferable when internal packet-processing paths have demanding clock targets. Designers should use the official package files to assign power, configuration, clock, and differential I/O balls, then reserve board resources for external memory and high-speed interfaces.
अनुशंसित
Industrial Control Systems
The XC5VLX85-3FFG676C can consolidate parallel I/O, timing logic, communication protocols, and control functions in an industrial system. Its 440 I/O are useful for connecting sensors, actuators, counters, field buses, operator interfaces, and safety-monitoring logic without relying on a large collection of fixed-function devices. The programmable architecture permits algorithm revisions and configuration updates when field behavior changes. A production design must still verify the exact temperature grade, supply requirements, and lifecycle constraints, and it must separate noisy industrial inputs from sensitive clock and configuration nets through careful PCB zoning.
अनुशंसित
Digital Signal Processing
The XC5VLX85-3FFG676C is suitable for parallel DSP, filtering, waveform generation, modulation, and data-acquisition control when a programmable FPGA is preferred over a fixed logic device. The 82,944 logic cells provide implementation space for parallel datapaths and state machines, while 440 I/O can connect converters, memory, and test equipment. The -3 grade should be selected where the target implementation requires the higher timing performance of the family. Before committing to the device, confirm the exact DSP48, block-RAM, operating-voltage, and maximum-frequency ratings in the Virtex-5 documentation for the selected package.
अनुशंसित
Test and Measurement Equipment
The XC5VLX85-3FFG676C can implement flexible acquisition, pattern generation, timing, and instrument-control logic for test and measurement systems. Its high I/O count supports parallel DUT interfaces, while its programmable architecture allows measurement algorithms and protocols to be updated independently of fixed hardware. The -3 speed grade can improve implementation flexibility for demanding timing paths, although actual throughput must be established through synthesis and timing analysis. Board planning should account for the FCBGA construction, decoupling, controlled clocks, and the need for reliable configuration storage and recovery.
अनुशंसित
Communications Infrastructure
The XC5VLX85-3FFG676C is applicable to line-card, interface, and protocol-conversion designs that need programmable logic and high external connectivity. The 440 I/O support parallel payload paths, management interfaces, clocks, and physical-layer connections, while 82,944 logic cells can implement adaptation, framing, and error-handling functions. For clock-sensitive infrastructure, the -3 grade offers a stronger starting point than the -1 family grade. Pin assignment must preserve the approved power and differential-pair topology of the FFG676 package, and any modernization plan should verify whether the original design can move to a newer FPGA without changing the board.
अनुशंसित
Embedded Video Processing
The XC5VLX85-3FFG676C can support embedded video timing, pixel movement, color processing, and interface adaptation in professional or industrial imaging systems. Its 440 I/O provide substantial parallel connectivity for video data and control signals, while the programmable fabric allows resolution- and format-specific pipelines to be implemented in one device. The -3 grade is advantageous when pixel clocks and auxiliary timing leave limited margin. Designers should use the manufacturer package pinout for every power, clock, and differential signal, and confirm that the selected memory interface, converter interface, and clocking scheme can be closed at the required operating conditions.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC5VLX85-3FFG676C — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC5VLX85-1FFG676C | XC5VLX110-1FFG676I | XC5VLX85-2FFG676C |
|---|---|---|---|---|
| Brand | Xilinx | Xilinx | Xilinx | Xilinx |
| Package | 676-pin FCBGA | 676-pin FCBGA - same | 676-pin FCBGA - same | 676-pin FCBGA - same |
| FPGA Family | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX | Virtex-5 LX |
| Speed Grade | -3 | -1 | -1 | -2 |
| Programmable Logic | Field-programmable gate array | Field-programmable gate array | Field-programmable gate array | Field-programmable gate array |
| Mounting Type | Surface mount | Surface mount | Surface mount | Surface mount |
| Package Designation | FFG676 | FFG676 - same | FFG676 - same | FFG676 - same |
मुख्य विशेषताएँ
- Higher -3 performance grade than the principal same-package contingency option (बनामXC5VLX85-1FFG676C)
- Exact XC5VLX85 device tier preserves the established resource basis (बनामXC5VLX110-1FFG676I)
- Stronger performance grade than the -2 family variant (बनामXC5VLX85-2FFG676C)
डिज़ाइन नोट्स
Assign the FFG676 ball map from the official AMD package pinout files rather than from a generic BGA drawing. In particular, keep power and ground balls on their intended nets, preserve the manufacturer's recommended connections for configuration pins, and maintain the specified assignments for clock and differential I/O. Because the package has no key in the library, use the exact ASCII package file as the controlling board-design reference.
Plan the power tree from the exact datasheet rather than from generic FPGA conventions. The 676-ball package should receive a continuous low-impedance power plane with short supply paths, local bulk capacitance, and dense high-frequency decoupling at each supply ball group. Validate the capacitor network, target impedance, voltage tolerance, and power-up behavior against the manufacturer recommendations for the XC5VLX85 device and board stack-up.
Separate sensitive clock, configuration, and differential-I/O routing from noisy logic and switching-supply return currents. Use the package-reference design as the starting point for escape routing, preserve symmetry of length-matched interfaces, and avoid plane splits beneath high-speed links. Board construction must also satisfy the assembly requirements of the 676-ball FCBGA, including escape geometry, via strategy, solder-mask design, and thermal-via placement.
Do not treat an FFG676 package match as proof that two FPGA order codes are interchangeable. A speed-grade change can invalidate timing closure, an industrial suffix can change environmental requirements, and a different device tier can alter resource counts or pin behavior. Before substitution, compare the exact ordering codes, package files, voltage tables, configuration requirements, utilized resources, and static timing results.
अनुपालन जानकारी
The exact ordering code is from the mature Virtex-5 LX product family, but no product-specific environmental or automotive qualification declarations appear in the retrieved records. AEC-Q100 is not applicable to the standard XC5VLX85-3FFG676C ordering code; use an explicitly automotive-qualified ordering option for automotive requirements.