XC7K410T-3FBG900E - Kintex-7 FPGA with 500 I/O | AMD
MPN: XC7K410T-3FBG900E ✓ सक्रियXC7K410T-3FBG900E अवलोकन
A Kintex-7 FPGA is a programmable semiconductor in the FPGA and CPLD hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA combines configurable logic, block RAM, programmable I/O, digital signal processing resources, and dedicated serial transceivers. This makes the Kintex-7 family suitable for designs requiring parallel processing, high-speed interfaces, adaptable hardware, and product differentiation without committing the entire implementation to custom silicon.
The XC7K410T-3FBG900E combines high logic density with a large 900-ball package and 500 user I/O. Its 406,720 logic cells provide substantial capacity for protocol engines, image and signal processing, control logic, networking, and heterogeneous accelerator architectures. The 28,620 Kb block-RAM resource supports buffering, packet storage, firmware, and data-plane functions. The -3 grade prioritizes maximum performance within the Kintex-7 family, making this device appropriate when timing performance is more important than minimum energy per operation.
The FBG900 package supports high-density, high-speed interconnect layouts and provides the substantial pin count needed by wide buses, memory interfaces, clocks, and transceiver-based links. AMD describes the Kintex-7 family as a 28 nm price/performance and power platform supporting PCIe Gen3 and 10 Gigabit Ethernet. These interfaces make the device relevant to industrial networking, test equipment, signal processing, aerospace and defense systems, communications infrastructure, and embedded high-performance control platforms.
Design work should begin with the AMD Kintex-7 package pinout files and the device datasheet. Because the FBG900 package has 900 balls, exact routing, power planning, bank planning, and differential-pair layout require the package-specific files rather than a generic block diagram. Designers should also preserve the intended -3 timing and temperature constraints during device migration, since speed-grade and temperature changes can alter timing closure even when the device retains the same package.
This page combines the confirmed XC7K410T-3FBG900E specifications with same-package Kintex-7 alternatives, practical migration considerations, and an engineering-focused comparison. Use the manufacturer datasheet and package pinout files as the authority for final connectivity, timing, power, and PCB implementation decisions.
के लिए ड्रॉप-इन विकल्प XC7K410T-3FBG900E — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC7K410T-3FBG900E (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Package, RoHS Status.
XC7K410T-2FBG900E
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC7K410T-1FBG900E
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC7K410T-2FBG900I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7K410T-L2FBG900E
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC7K410T-1FBG900I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7K410T-3FBG900E Maximum Ratings और Electrical Characteristics
| Device Type | Field-Programmable Gate Array (FPGA) |
| FPGA Family | Kintex-7 |
| Logic Cells | 406,720 cells |
| Block RAM | 28,620 Kb |
| User I/O Count | 500 I/O |
| Process Technology | 28 nm |
| Speed Grade | -3, highest-performance Kintex-7 grade |
| पैकेज | FBG900 FCBGA |
| Package Ball Count | 900 balls |
| माउंटिंग प्रकार | Surface Mount |
| Supported High-Speed Interface | PCIe Gen3 |
| Supported Networking Class | 10 Gigabit Ethernet |
| लाइफसाइकिल स्थिति | Active |
| RoHS स्थिति | ROHS3 compliant |
| Minimum Order Quantity | 1 unit |
| Lead Time | 52 weeks |
| Shipping Packaging | Tray |
| Manufacturer Part Number | XC7K410T-3FBG900E |
XC7K410T-3FBG900E 900 balls पिन कॉन्फ़िगरेशन गाइड
XC7K410T-3FBG900E (900 balls पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC7K410T-3FBG900E.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC7K410T-3FBG900E के लिए उपयुक्त है 6 अनुप्रयोगs: 10 Gigabit Ethernet Packet Processing, PCIe Gen3 Endpoint Expansion, Industrial Signal Acquisition, High-Speed Test and Measurement, Aerospace and Defense Control, Embedded Vision Processing.
10 Gigabit Ethernet Packet Processing
The XC7K410T-3FBG900E fits high-throughput Ethernet equipment because its 406,720 logic cells can implement parallel packet classification, queue management, protocol handling, and traffic control, while 28,620 Kb of block RAM supports packet buffering and descriptor storage. The 500 I/O provide substantial parallel connectivity for control logic, status signals, and board-level interfaces. AMD identifies 10 Gigabit Ethernet as a mainstream Kintex-7 capability, making this device appropriate for gateway, switching, and network-access functions. The -3 grade should be selected when the critical datapath benefits from the family’s highest performance rather than minimum power. Final transceiver selection, channel margin, reference-clock planning, and timing closure must follow the AMD datasheet and the selected network interface implementation.
अनुशंसित
PCIe Gen3 Endpoint Expansion
The XC7K410T-3FBG900E can implement a PCIe Gen3 endpoint or accelerator interface where a system needs programmable protocol logic, wide internal parallelism, and substantial data buffering. Its 406,720 logic cells can divide work among the PCIe interface, data-processing pipelines, and system-control functions, while the 28,620 Kb block RAM can support buffering between high-speed serial traffic and parallel fabric resources. The -3 performance grade is useful when the link and fabric paths require maximum Kintex-7 timing performance. Board implementation must account for the transceiver pins, reference clocks, power rails, channel-loss expectations, and package-specific ball assignments. The AMD transceiver and power documentation should govern connector, channel, and bypass-capacitor decisions.
अनुशंसित
Industrial Signal Acquisition
The XC7K410T-3FBG900E suits industrial signal-acquisition systems that combine multiple parallel sensors with real-time filtering or waveform analysis. The 500 I/O can accommodate substantial digital sensor connectivity, while the configurable logic fabric can implement digital filters, counters, interfaces, and control logic. Its 406,720 logic cells and 28,620 Kb of block RAM provide enough parallel capacity for multi-channel data paths and local sample buffering. The -3 grade benefits timing-sensitive acquisition pipelines that require maximum Kintex-7 speed. Designers should still verify the actual I/O standards, input thresholds, clocking architecture, and channel-count budget against the manufacturer electrical tables. External analog-front-end components remain necessary when the measured signals require conversion, amplification, or isolation.
अनुशंसित
High-Speed Test and Measurement
The XC7K410T-3FBG900E is suitable for programmable test and measurement instruments that combine pattern generation, timing control, analysis, and communication functions. Its large logic fabric can run multiple concurrent channels, while 28,620 Kb of block RAM can hold captured data, reference patterns, and intermediate results. The 500-I/O FBG900 device also offers substantial connectivity for fixture controls, synchronization, and high-speed data interfaces. The highest-performance -3 grade can benefit instrumentation timing paths that have limited headroom. Practical implementation requires disciplined clock planning, deterministic I/O timing, and separate consideration of external memory or acquisition hardware. Use the package pinout files and device timing constraints to prevent assumptions about general-purpose I/O behavior or high-speed transceiver availability.
अनुशंसित
Aerospace and Defense Control
The XC7K410T-3FBG900E can support high-complexity control, monitoring, and communication logic in aerospace and defense systems where programmable parallelism and long product customization are valuable. The 406,720 logic cells allow multiple independent control domains to coexist, and the 28,620 Kb of block RAM can support state retention, buffering, and fault-management functions. The -3 grade is appropriate for timing-sensitive logic, although deployment requires checking the exact ordering code against the program’s temperature, reliability, and qualification requirements. Board-level implementation must include controlled power sequencing, clock monitoring, independent configuration verification, and package-specific decoupling. Since military qualification is not established by the device family name alone, engineers should consult the exact AMD product documentation and applicable program requirements before releasing a design.
अनुशंसित
Embedded Vision Processing
The XC7K410T-3FBG900E can implement embedded image and video pipelines because 406,720 logic cells support parallel feature extraction, filtering, and control functions, while 28,620 Kb of block RAM provides local line, frame, or feature buffering. The -3 performance grade helps timing-sensitive pixel pipelines where maximum Kintex-7 performance is useful. Its 500 I/O can connect image sensors, capture devices, memory interfaces, and display-control logic, subject to the electrical limitations of the selected I/O standards. A practical design should partition low-latency pixel processing on the FPGA while using external DDR memory for frame capacity. Timing closure, memory-interface planning, and power delivery across the FBG900 package are critical. Verify actual video and sensor interface capabilities in the manufacturer documentation rather than inferring them solely from the logic-cell count.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC7K410T-3FBG900E — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC7K410T-2FBG900E | XC7K410T-1FBG900E | XC7K410T-2FBG900I | XC7K410T-L2FBG900E | XC7K410T-1FBG900I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | FBG900 FCBGA | FBG900 FCBGA | FBG900 FCBGA | FBG900 FCBGA | FBG900 FCBGA | FBG900 FCBGA |
| Speed Grade | -3 | -2 | -1 | -2 | -2L | -1 |
| Process Technology | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm | 28 nm |
| Package Ball Count | 900 balls | 900 balls | 900 balls | 900 balls | 900 balls | 900 balls |
| PCIe Gen3 Support | Supported by Kintex-7 family | Supported by Kintex-7 family | Supported by Kintex-7 family | Supported by Kintex-7 family | Supported by Kintex-7 family | Supported by Kintex-7 family |
मुख्य विशेषताएँ
- Highest Kintex-7 performance grade (बनामXC7K410T-2FBG900E)
- Lower-power speed option available for power-sensitive migration (बनामXC7K410T-L2FBG900E)
- Large same-package logic and memory capacity (बनामXC7K410T-2FBG900I)
- 500-I/O connectivity in the same FBG900 footprint (बनामXC7K410T-1FBG900I)
डिज़ाइन नोट्स
Use the AMD Kintex-7 package device pinout files as the PCB connectivity authority for FBG900. The package contains 900 balls, so every selected supply, ground, clock, transceiver, and general-purpose signal must be mapped to the exact ordering code. Do not substitute an FFG900 or FBV900 library because those package codes have different physical requirements and ball assignments.
Plan the FBG900 power distribution around the exact rail and current requirements in the manufacturer datasheet rather than generic FPGA guidance. Separate high-current and sensitive rails, use the recommended voltage-regulator topology, and place bypass capacitors adjacent to their assigned package balls. Account for startup current, configuration behavior, and the worst-case -3 operating profile when sizing the supply and copper.
Preserve the package-specific reference-plane and escape-routing geometry for high-speed transceiver and memory interfaces. Keep clock and data paths controlled, account for ball-grid escape constraints, and follow the AMD implementation guidance for length matching and layer transitions. A conventional FPGA schematic symbol is not sufficient for pin assignment or high-speed routing verification.
Do not treat another Kintex-7 speed or temperature suffix as a transparent substitution. The -3, -2, -1, and -2L grades have different timing behavior, and the I suffix also changes the temperature designation. After selecting an alternative, rerun synthesis and implementation with the exact device model, replace timing constraints, regenerate the bitstream, and repeat hardware validation.
Estimate junction temperature using the exact package thermal data, board copper, airflow, and the design’s activity factor; do not assume that the 900-ball package eliminates thermal concerns. High-speed switching designs can consume substantial dynamic power even when logic utilization is moderate. Compare the calculated junction margin with the manufacturer limit and revise the power plane, vias, heat-spreading area, or airflow when necessary.
अनुपालन जानकारी
The manufacturer-part record identifies the device as ROHS3 compliant. No separate REACH, lead-free, halogen-free, or conflict-minerals declaration was confirmed.