XC7Z035-2FBG676E - 275K Zynq SoC, 800MHz | AMD
MPN: XC7Z035-2FBG676E ✓ सक्रियXC7Z035-2FBG676E अवलोकन
A Zynq-7000 SoC is a heterogeneous programmable system-on-chip that combines a hard processor subsystem with FPGA fabric in one device. The ARM Cortex-A9 subsystem executes operating-system-level software, while the Kintex-7 programmable logic implements parallel data paths, custom accelerators, interfaces, and signal processing. This integration can reduce component count and avoid data transfers between a separate processor and FPGA.
The XC7Z035 offers 275K logic cells and 800 MHz performance in the listed configuration. Integrated features include AES encryption support, a watchdog timeout detector, and an integrated temperature sensor. The processor subsystem includes on-chip memory, external memory interfaces, and a broad collection of peripheral connectivity interfaces, while CoreSight provides integrated debug and trace visibility for embedded development.
Its 676-FCBGA package supports high-density interconnect through 250 I/O, making the device appropriate for industrial control, networking, communications, image processing, and embedded edge systems. The integration of ARM software execution with FPGA fabric allows designers to place time-critical functions in programmable logic while retaining operating-system support for networking, control, storage, and user-facing functions. The processor, fabric, memory interfaces, and peripherals share a single programmable platform.
A typical design would run board-support software on the dual Cortex-A9 processors and implement time-critical interfaces or accelerators in the Kintex-7 fabric. DDR memory, flash storage, transceivers, clocking, and power rails remain external system dependencies. The 27 x 27 mm BGA package also requires careful PCB escape routing, power delivery, thermal planning, and assembly-process control.
Engineers should verify all signal assignments against the AMD DS190 device documentation before layout because the complete 676-ball pin map is too large to reproduce safely without the manufacturer package diagrams. Differential pairs, supply rails, high-speed memory connections, and configuration pins require exact pin, voltage, and impedance assignments. Power sequencing and thermal performance should be validated for the final board and enclosure.
This product page consolidates the verified device identity, package information, search-driven alternatives, parameter comparisons, and engineering guidance into a design-focused reference. It supports early part selection while directing readers to the manufacturer documentation for authoritative pin-level implementation details.
के लिए ड्रॉप-इन विकल्प XC7Z035-2FBG676E — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XC7Z035-2FBG676E (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Device Type, Architecture, FPGA Logic Cells, Package Type.
XC7Z035-3FBG676E
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7Z035-L2FBG676I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XC7Z035-2FBG676I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7Z035-1FBG676C
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7Z035-1FBG676I
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XC7Z035-2FBG676E Maximum Ratings और Electrical Characteristics
| Device Type | Zynq-7000 Kintex-7 system-on-chip |
| Processor Core | Dual-core ARM Cortex-A9 MPCore |
| Rated Processor Frequency | 800 MHz |
| Programmable Logic Cells | 275K |
| FPGA Fabric | Kintex-7 |
| Debug Support | CoreSight |
| ऑपरेटिंग तापमान रेंज | 0°C to +100°C |
| Package Type | 676-FCBGA |
| Package Dimensions | 27 x 27 mm |
| Package Pin Count | 676 balls |
| Input and Output Count | 250 I/O |
| Security Feature | AES encryption support |
| Watchdog Support | Watchdog timeout detection |
| Temperature Monitoring | Integrated temperature sensor |
| On-Chip Memory | Integrated on-chip memory |
| External Memory Interfaces | External memory interfaces |
| Peripheral Connectivity | On-chip peripheral connectivity interfaces |
| माउंटिंग प्रकार | Surface mount |
XC7Z035-2FBG676E 676 balls पिन कॉन्फ़िगरेशन गाइड
XC7Z035-2FBG676E (676 balls पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XC7Z035-2FBG676E.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XC7Z035-2FBG676E के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Control and Automation, Industrial Networking Gateway, Machine Vision and Image Processing, Communications Equipment, Secure Embedded Processing, Data Acquisition and Test Equipment.
Industrial Control and Automation
The XC7Z035-2FBG676E fits industrial controllers that need deterministic parallel logic alongside a conventional operating-system environment. Its dual ARM Cortex-A9 cores can run communications, supervisory software, and control tasks, while the 275K Kintex-7 logic cells can implement motion-control datapaths, encoder interfaces, timing functions, or custom I/O. The listed 0°C to +100°C operating range is appropriate for many industrial enclosures. In a typical implementation, the processor subsystem manages Ethernet, storage, diagnostics, and safety sequencing, while programmable logic handles high-rate sampling or actuator timing. Designers should use AMD DS190 for final pin assignment, power planning, and timing closure, and should validate thermal performance with the actual board, enclosure, and worst-case logic utilization.
अनुशंसित
Industrial Networking Gateway
The XC7Z035-2FBG676E is appropriate for a network gateway that must combine Linux-based protocol processing with hardware-assisted packet handling. The dual Cortex-A9 MPCore configuration can support control-plane applications, management services, and secure connectivity, while the Kintex-7 fabric can accelerate parsing, filtering, compression, or interface conversion. Its 250 I/O provide substantial board-level connectivity for multiple Ethernet or serial interfaces, although external PHYs and magnetics remain required. A practical architecture may place the processor subsystem on DDR memory and offload fixed-format traffic functions to programmable logic. Board designers should plan memory topology, reference-clock distribution, high-speed escape routing, and power sequencing before committing to the 676-ball package, while validating protocol timing under realistic traffic loads.
अनुशंसित
Machine Vision and Image Processing
The XC7Z035-2FBG676E can support machine-vision systems that benefit from partitioning image processing between programmable logic and embedded software. Parallel stages such as pixel classification, filtering, thresholding, and frame pre-processing are well suited to the 275K Kintex-7 logic cells, while the dual Cortex-A9 cores can manage control, logging, networking, and higher-level decision logic. The 676-FCBGA package offers 250 I/O for connecting image sensors, memory, and external accelerators, but sensor interface timing, external memory bandwidth, and power consumption require careful budgeting. A typical design routes image data through FPGA fabric before transferring selected results to the processor subsystem. Engineers should use AMD DS190 for memory-interface constraints and timing analysis, then validate end-to-end frame latency and thermal behavior in the final imaging enclosure.
अनुशंसित
Communications Equipment
The XC7Z035-2FBG676E fits communications equipment requiring a processor subsystem and FPGA fabric within one package. ARM cores can handle protocol stacks, configuration, and supervisory functions, while programmable logic can implement signal conditioning, framing, channelization, or custom interfaces. Its 800 MHz listed processor rating supports general-purpose embedded processing, and the 275K logic-cell count permits parallel datapaths to be consolidated. In a communications design, DDR memory and clocking components remain external, and high-speed interfaces require exact routing based on the AMD package data. The integrated AES support and temperature sensor can contribute to secure, monitored implementations, while the watchdog timeout detection supports system-health management. Final qualification should cover operating temperature, clock accuracy, interface margins, recovery behavior, and sustained thermal performance.
अनुशंसित
Secure Embedded Processing
The XC7Z035-2FBG676E is suitable for secure embedded systems that combine operating-system software with programmable hardware. The dual Cortex-A9 MPCore subsystem supports general-purpose processing, while the Kintex-7 fabric can implement cryptographic pipelines, protocol accelerators, or access-control logic. AES encryption support and the integrated temperature sensor provide relevant security and monitoring functions, and the watchdog timeout detector can help manage system-health events. Designers can partition security-critical operations between fixed hardware logic and software according to the threat model. Board implementation still requires protected boot configuration, secure key storage, controlled debug access, and careful power-sequence analysis. The 27 x 27 mm BGA also demands fine-pitch assembly capability, continuous power planes, and a thermal strategy that accommodates processor and fabric activity during long-duration encryption workloads.
अनुशंसित
Data Acquisition and Test Equipment
The XC7Z035-2FBG676E can serve as the central programmable element in data-acquisition and test systems. The Kintex-7 fabric can capture multiple channels, perform triggering, digital filtering, timing correlation, and data reduction, while the dual ARM Cortex-A9 subsystem manages the user interface, instrument control, calibration, and data transfer. The device's 250 I/O enables substantial parallel connectivity, subject to the allocation and timing constraints of the selected configuration. A practical instrument design can use DDR memory for capture buffers and deterministic serial links for transferring processed results. Engineers should reserve configuration pins correctly, verify all ball assignments against the manufacturer documentation, and assess whether the 800 MHz processor grade and 275K logic resources meet acquisition bandwidth and latency requirements. Power and heat should be evaluated at realistic duty cycles rather than idle operating conditions.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XC7Z035-2FBG676E — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XC7Z035-3FBG676E | XC7Z035-L2FBG676I | XC7Z035-2FBG676I | XC7Z035-1FBG676C | XC7Z035-1FBG676I |
|---|---|---|---|---|---|---|
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Package | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) | 676-FCBGA (27x27) |
| Speed Grade | -2 | -3 | -2 | -2 | -1 | -1 |
| Ordering Suffix | -E | -E | -LI | -I | -C | -I |
मुख्य विशेषताएँ
- Balanced speed grade for general-purpose embedded processing (बनामXC7Z035-3FBG676E)
- Identified industrial-temperature ordering option (बनामXC7Z035-L2FBG676I)
- Extends the 800 MHz option to an -I ordering code (बनामXC7Z035-2FBG676I)
- Higher speed grade remains available in the same package format (बनामXC7Z035-3FBG676E)
डिज़ाइन नोट्स
Treat the 676-FCBGA layout as a constrained-routing design. Use the AMD package drawing to escape power, ground, configuration, clock, memory, and high-speed I/O signals, and preserve continuous power-plane geometry beneath the device. Layer transitions, via arrays, and BGA escape tracks should be selected from the manufacturer reference stack-up rather than developed independently. Confirm differential-pair geometry and escape lengths in the post-layout simulation.
Design the rails for worst-case simultaneous processor and Kintex-7 fabric activity, including startup current, memory initialization, configuration, and transient response. Use the AMD power-estimation method with the selected clock frequencies, I/O state, fabric utilization, and ambient temperature. Decoupling, load-switch sequencing, and power-good behavior must be validated so no rail violates its device limits during startup or operating-mode changes.
The processor subsystem and programmable logic can produce substantially different activity profiles, so thermal analysis must include realistic workload duty cycles rather than a single nominal power estimate. Check the exposed-package heat-flow path, PCB copper distribution, via connectivity, and enclosure heat transfer. Recalculate junction temperature at the highest expected ambient condition and ensure every power source has adequate transient and steady-state margin.
Do not infer drop-in compatibility from the 676-ball count alone. Confirm the exact FBG package revision, every ball assignment, voltage requirements, configuration interface, and maximum operating conditions before using an alternate speed or temperature suffix. The suffix changes procurement qualification even when the package and principal architecture appear identical, so update the schematic, bill of materials, firmware configuration, and validation records together.
Memory and high-speed interfaces should be constrained from the supported I/O standards, board stack-up, and external memory-device requirements. Check write timing, read timing, board delay, clock skew, return paths, and reference-plane continuity at both processor and fabric endpoints. Use AMD timing analysis with realistic routing and package models, and include the effects of adjacent high-current switching or clock-distribution circuitry.
अनुपालन जानकारी
Compliance attributes were not established from the available product information and require confirmation from the current manufacturer product documentation or declaration.