XCKU9P-L2FFVE900E - 304 I/O Kintex UltraScale+ FPGA | AMD
MPN: XCKU9P-L2FFVE900E ✓ सक्रियXCKU9P-L2FFVE900E अवलोकन
A field-programmable gate array, or FPGA, is a semiconductor device whose digital logic, interconnects, and I/O behavior can be configured after manufacture. Within the product hierarchy, an FPGA is a programmable logic device and a general-purpose semiconductor. Compared with fixed-function logic, an FPGA allows designers to implement parallel processing, control, connectivity, and signal-processing functions in one integrated circuit while retaining hardware-level timing determinism and reconfigurability.
The key specification confirmed for the XCKU9P-L2FFVE900E is its 304-I/O interface count, with the device presented in the Kintex UltraScale+ family. That combination is useful when a design needs substantial parallel connectivity but does not require the very largest package or logic capacity in the product line. The 900-BBGA FCBGA package also supports high-density PCB routing, although its fine pitch, thermal requirements, and assembly complexity demand careful board design and manufacturing controls.
AMD documentation organizes the Kintex UltraScale+ family around device-specific DC and AC switching characteristics, package pinout data, and product-selection tables. The XCKU9P-L2FFVE900E should therefore be evaluated against the complete family documentation rather than inferred only from the distributor headline. Designers should confirm speed-grade limits, supported I/O standards, power behavior, configuration requirements, and absolute maximum ratings for the exact ordering code in the manufacturer datasheet and package files.
Typical uses include high-speed data acquisition, industrial control, test and measurement, communications infrastructure, embedded signal processing, and accelerator logic. Its 304 available I/O positions can accommodate substantial parallel connectivity, control signals, memory interfaces, and high-speed I/O when the selected lanes, voltage standards, banking rules, and package constraints permit them. The programmable nature of the device lets the same hardware platform support multiple bitstreams and product revisions.
A 900-ball FCBGA design requires deliberate thermal and routing planning. Place the device on a multilayer PCB with a continuous ground plane, route high-speed interfaces according to the AMD package guidelines, provide suitable decoupling, and validate power sequencing and thermal rise in the assembled system. Avoid changing the footprint to a different package or ordering suffix without rechecking mechanical drawings, pin functions, configuration pins, and power requirements.
This page combines the confirmed 304-I/O and 900-BBGA characteristics with package-level guidance, application fit, engineering checks, and clearly qualified replacement options. It is intended to help engineers narrow the Kintex UltraScale+ decision while keeping footprint, speed-grade, lifecycle, and qualification checks tied to the relevant AMD documentation.
के लिए ड्रॉप-इन विकल्प XCKU9P-L2FFVE900E — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XCKU9P-L2FFVE900E (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package Pin Count.
XCKU9P-2FFVE900E
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XCKU9P-2FFVE900I
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XCKU9P-L2FFVE900I
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XCKU9P-L1FFVE900E
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XCKU9P-1FFVE900E
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XCKU9P-L2FFVE900E Maximum Ratings और Electrical Characteristics
| Device Type | Kintex UltraScale+ FPGA |
| Device Family | Kintex UltraScale+ |
| FPGA Type | Field Programmable Gate Array |
| I/O Count | 304 I/O |
| Package Type | 900-BBGA, FCBGA |
| Package Pin Count | 900 balls |
| माउंटिंग प्रकार | Surface mount |
| RoHS स्थिति | ROHS3 compliant |
| HTSUS Code | 8542.39.0001 |
XCKU9P-L2FFVE900E 900 balls पिन कॉन्फ़िगरेशन गाइड
XCKU9P-L2FFVE900E (900 balls पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XCKU9P-L2FFVE900E.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XCKU9P-L2FFVE900E के लिए उपयुक्त है 6 अनुप्रयोगs: High-Speed Data Acquisition, Industrial Control and Automation, Communications Infrastructure, Test and Measurement, Embedded Signal Processing, Aerospace and Defense Systems.
High-Speed Data Acquisition
The XCKU9P-L2FFVE900E can serve as the central acquisition and processing FPGA in systems that combine parallel converters, sensors, memory, and a host processor. Its 304 I/O provide substantial connectivity for sampling control, trigger signals, reference channels, and high-speed interfaces. The programmable fabric allows developers to implement filtering, decimation, channel alignment, and packetization without relying on fixed application-specific logic. Before schematic release, confirm every selected I/O standard against the L2 device speed and temperature limits in the AMD documentation. PCB planning must also account for the 900-BBGA FCBGA footprint, power-integrity requirements, and high-speed escape routing.
अनुशंसित
Industrial Control and Automation
The AMD XCKU9P-L2FFVE900E is appropriate for industrial controllers that combine deterministic logic, communications, motion sequencing, and machine safety monitoring. The 304-I/O interface can distribute discrete controls and accept feedback signals from sensors, drives, and operator panels, while the Kintex UltraScale+ programmable fabric supports concurrent control logic and protocol handling. Engineers should use AMD timing tools to close each clock domain and verify that the selected L2 grade meets the deployed temperature range. The 900-BBGA FCBGA package requires a multilayer PCB with careful decoupling, thermal design, and assembly planning to achieve reliable operation in industrial equipment.
अनुशंसित
Communications Infrastructure
The XCKU9P-L2FFVE900E can implement high-throughput communications aggregation, packet processing, bridge functions, or protocol conversion within network infrastructure. Its programmable architecture allows designers to combine fixed high-speed interfaces with adaptable logic and test instrumentation, while 304 I/O support substantial board-level connectivity. Exact lane standards, data rates, clocking schemes, and power constraints must be selected from the AMD Kintex UltraScale+ family documentation. Because the device uses a 900-BBGA FCBGA package, signal-integrity work should include controlled impedance, continuous return paths, rigorous power-plane segmentation, and via-aware escape routing before high-volume manufacturing.
अनुशंसित
Test and Measurement
The XCKU9P-L2FFVE900E is suitable for modular test and measurement instruments that combine pattern generation, acquisition, timing control, and digital signal processing. Its programmable architecture permits one hardware platform to support multiple test protocols and customer configurations, while 304 I/O enable dense connection to fixture boards, instruments, and trigger systems. Design teams should evaluate channel count, expected data rates, and timing closure for the selected L2 grade before committing to the device. The 900-BBGA FCBGA land pattern also requires board-level validation for power delivery, thermal performance, high-speed routing, and BGA assembly yield.
अनुशंसित
Embedded Signal Processing
The AMD XCKU9P-L2FFVE900E can execute parallel filtering, correlation, waveform transformation, and digital front-end functions because programmable logic fabric allows multiple data paths to operate concurrently. Its 304 I/O provide interfaces to ADC and DAC channels, digital sensors, memory, and co-processors, while the high-pin-count package reduces the need for external interface multiplexing. Actual throughput depends on the selected I/O standards, clock rates, memory architecture, and the L2 timing grade. Designers should partition the design into timing domains, apply pipelining where required, and validate package parasitics and power integrity with realistic PCB constraints.
अनुशंसित
Aerospace and Defense Systems
The XCKU9P-L2FFVE900E can be evaluated for programmable avionics, mission-processing, telemetry, and electronic-support functions where parallel logic and flexible I/O are valuable. The Kintex UltraScale+ family provides the programmable-logic platform, while the 304-I/O count supports interconnected acquisition, control, and communication channels. Before using the exact L2 ordering code in a flight or defense program, engineers must verify the device's temperature rating, screening, qualification, export classification, reliability documentation, and lifecycle commitments directly from AMD. The 900-BBGA FCBGA implementation also demands controlled assembly processes, inspection plans, and long-term thermal and solder-joint reliability validation.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XCKU9P-L2FFVE900E — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XCKU9P-2FFVE900E | XCKU9P-2FFVE900I | XCKU9P-L2FFVE900I | XCKU9P-L1FFVE900E | XCKU9P-1FFVE900E |
|---|---|---|---|---|---|---|
| Package | 900-BBGA, FCBGA | 900-BBGA, FCBGA | 900-BBGA, FCBGA | 900-BBGA, FCBGA | 900-BBGA, FCBGA | 900-BBGA, FCBGA |
| Brand | AMD | AMD | AMD | AMD | AMD | AMD |
| Device Family | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ | Kintex UltraScale+ |
| Base Device | XCKU9P | XCKU9P | XCKU9P | XCKU9P | XCKU9P | XCKU9P |
| Speed or Grade Code | L2 | -2 | -2 | L2 | L1 | -1 |
| Temperature Grade Code | E | E | I | I | E | E |
मुख्य विशेषताएँ
- Exact L2 ordering configuration (बनामXCKU9P-2FFVE900E)
- Exact E-grade ordering configuration (बनामXCKU9P-2FFVE900I)
- Same-package family interchange path (बनामXCKU9P-L2FFVE900I)
- Mechanically reusable 900-ball land pattern (बनामXCKU9P-L1FFVE900E)
डिज़ाइन नोट्स
Design the 900-BBGA escape routing directly from AMD's package pinout files and the selected PCB stack-up. Preserve uninterrupted return paths beneath high-speed interfaces, use short connections from power vias to the relevant supply balls, and place local decoupling where the package rules require it. Review the escape pattern with the assembler because ball-pitch, via-in-pad, solder-mask, and pad-definition differences can prevent assembly even when the nominal package designation is unchanged.
Estimate junction temperature from the selected bitstream's power consumption and the package-to-board thermal path. The 900-BBGA FCBGA package can move substantial heat into the multilayer PCB, so include copper planes, thermal vias, and enclosure airflow in the model. Validate worst-case ambient temperature, utilization, adjacent heat sources, and airflow using a physical thermal measurement; a copper area that is adequate in simulation can still underperform after assembly materials and enclosure restrictions are included.
Treat every high-speed interface as a controlled-impedance channel rather than a simple point-to-point connection. Use AMD's recommended I/O standards and architecture guidance, account for package and PCB loss, maintain suitable return-path continuity, and validate timing with post-route extraction. Changes in layer transitions, via geometry, or reference-plane splits can materially alter performance even when the XCKU9P-L2FFVE900E device selection remains unchanged.
Do not substitute an ordering suffix solely because the land pattern matches. Verify speed, temperature, qualification, lifecycle, supported I/O standards, and bitstream compatibility in AMD's ordering information and device documentation. Also avoid inferring pin functions from a generic 900-ball outline: power, ground, configuration, clock, and user I/O assignments must come from the package pinout file for the exact FFVE900 device.
अनुपालन जानकारी
ROHS3 compliance and HTSUS code 8542.39.0001 are stated in the GlobalSpec product pages. Other compliance and qualification attributes were not established from the cited records.