XMC4400F100F512ABXUMA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4400F100F512ABXUMA1 ✓ सक्रियXMC4400F100F512ABXUMA1 अवलोकन
A microcontroller is a programmable semiconductor that integrates a processor core, memory, peripherals, and communication interfaces on one package. Within the embedded-control hierarchy, this device is an Arm Cortex-M4 MCU, a 32-bit real-time microcontroller, and an industrial communications controller. Its combination of deterministic peripheral integration and Ethernet connectivity allows a single controller to supervise sensors, actuators, communications, and safety-oriented control functions without requiring a separate network interface.
The XMC4400F100F512ABXUMA1 provides 512 KB of flash, a 120 MHz clock, and a 32-bit Arm Cortex-M4 processing core. Its 10/100 Ethernet MAC supports industrial Ethernet designs, while the PG-LQFP-100 package exposes a broad set of digital and analog I/O through 100 pins. The exposed die pad must be connected to the common ground potential, as specified for packages containing this thermal and electrical ground feature.
The XMC4400 series architecture combines a high-performance Cortex-M4 core with dedicated real-time control and communication resources. At 120 MHz, the processor provides substantially more computational headroom than typical low-rate control MCUs, while the Ethernet MAC allows network-connected equipment to exchange operational data and support higher-level industrial protocols implemented in firmware. Detailed peripheral assignments, electrical limits, clock options, and package dimensions should be taken from the manufacturer datasheet and reference manual before schematic or PCB sign-off.
Typical applications include industrial Ethernet controllers, programmable automation equipment, motor and motion-control systems, networked sensor gateways, industrial communications equipment, and compact embedded control modules. The 512 KB flash capacity provides room for application code, communication stacks, configuration data, and update logic, while the 100-pin package supports the pin count required by multi-interface industrial designs.
PCB implementation requires careful attention to the common-ground architecture and exposed-pad connection. Connect VSS, VSSA, and VSSO to the same ground potential, and connect the exposed pad to common ground as directed by the manufacturer layout guidance. Confirm all decoupling, power-supply sequencing, analog-ground, and high-speed Ethernet layout requirements against the XMC4400 hardware documentation before production release.
This product page consolidates the verified ordering identity, core frequency, memory capacity, package, and Ethernet configuration with engineering guidance for comparison and design review. It also distinguishes exact-order alternatives from broader XMC4400 family references so procurement teams can assess substitution risk without treating electrically similar but undocumented parts as drop-in replacements.
के लिए ड्रॉप-इन विकल्प XMC4400F100F512ABXUMA1 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XMC4400F100F512ABXUMA1 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type, Flash Memory, Flash Organization, Application Class.
XMC4400F100F512BAXUMA1
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XMC4400F100F512BAXQMA1
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XMC4400F100K512BAXUMA1
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XMC4400F100K512BAXQMA1
✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापितकीमत के लिए संपर्क करें
डेटाशीट देखें →XMC4400F100K512ABXUMA1
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XMC4400F100F512ABXUMA1 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit industrial microcontroller |
| Processor Core | Arm Cortex-M4 |
| CPU Architecture | 32-bit |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 512 KB |
| Flash Organization | 512K x 8 |
| Ethernet MAC | 10/100 Ethernet MAC |
| Series | XMC4000 |
| पैकेज | PG-LQFP-100 |
| Package Pin Count | 100 pins |
| Thermal Pad | Exposed die pad |
| Ground Architecture | Common ground for VSS, VSSA, and VSSO |
| माउंटिंग प्रकार | Surface mount |
| Ordering Designation | XMC4400F100F512ABXUMA1 |
XMC4400F100F512ABXUMA1 100 pins पिन कॉन्फ़िगरेशन गाइड
XMC4400F100F512ABXUMA1 (100 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XMC4400F100F512ABXUMA1.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XMC4400F100F512ABXUMA1 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Controllers, Programmable Automation Equipment, Motor and Motion Control, Connected Sensor Gateways, Industrial Communications Equipment, Embedded Control Modules.
Industrial Ethernet Controllers
The XMC4400F100F512ABXUMA1 fits industrial Ethernet controllers because it combines a 10/100 Ethernet MAC with a 120 MHz 32-bit Arm Cortex-M4 core. The controller can manage network frames, local control loops, diagnostics, and configuration data in one device rather than splitting those tasks across separate processors. Its 512 KB flash provides space for the Ethernet stack, application firmware, and field-update functions. In a controller design, place the MCU and PHY according to the reference layout, provide clean power to the Ethernet circuitry, and validate signal integrity, isolation, and grounding requirements for the target installation.
अनुशंसित
Programmable Automation Equipment
For programmable automation equipment, the XMC4400F100F512ABXUMA1 provides 120 MHz processing performance, 512 KB of flash, and a broad 100-pin package for connecting sensors, actuators, and field-bus circuitry. The Cortex-M4 architecture supports responsive supervisory logic while the Ethernet MAC provides a path to supervisory stations or line-control systems. The 512 KB flash budget should be divided among the bootloader, communications, motion or sequencing logic, and diagnostics. Before layout release, confirm the exact peripheral assignments and pin-multiplex requirements in the device pin table, because package alternatives are meaningful only when those assignments remain unchanged.
अनुशंसित
Motor and Motion Control
The XMC4400F100F512ABXUMA1 is appropriate for compact motor and motion-control modules that need both deterministic control processing and network communication. Its 120 MHz Arm Cortex-M4 core can execute control algorithms, while the 10/100 Ethernet MAC can carry configuration, status, and diagnostic data. The PG-LQFP-100 package provides more I/O than a compact leadless package, which is useful when connecting position feedback, control signals, and communications. Verify timer channels, analog inputs, and pin-mux options against the exact derivative before assigning them, and keep switching-node and high-current motor paths separate from sensitive control and Ethernet routing.
अनुशंसित
Connected Sensor Gateways
A connected sensor gateway can use the XMC4400F100F512ABXUMA1 to aggregate measurements, run local filtering and control, and forward information over 10/100 Ethernet. The 120 MHz core provides useful throughput for protocol processing and gateway logic, while 512 KB of flash supports a substantial embedded application. A practical design should allocate memory for an update image, protect configuration data, and implement watchdogs for network or sensor faults. Validate the PHY interface, isolation requirements, magnetics, and connector layout as a complete Ethernet subsystem rather than treating the MCU package alone as sufficient for compliance or field reliability.
अनुशंसित
Industrial Communications Equipment
The XMC4400F100F512ABXUMA1 can serve as the central controller in industrial communications equipment that bridges local I/O to an Ethernet infrastructure. Its Cortex-M4 processing capability handles protocol tasks and application logic, while its integrated 10/100 Ethernet MAC reduces the need for a separate network controller. The 100-pin package offers a practical route to status indicators, configuration interfaces, and multiple external interfaces. A production design should define boot behavior, watchdog recovery, network timing, and firmware-update security. Confirm the clock configuration and supported communication peripherals in the reference manual because the complete ordering suffix determines the available derivative configuration.
अनुशंसित
Embedded Control Modules
For compact embedded control modules, the XMC4400F100F512ABXUMA1 combines 512 KB of flash, a 120 MHz Cortex-M4 core, Ethernet connectivity, and 100-pin package integration. This combination allows one module to perform local control and network communication without relying on multiple discrete controllers. Designers should reserve storage for diagnostics and firmware updates, include independent reset and watchdog paths, and follow the common-ground architecture for VSS, VSSA, VSSO, and the exposed pad. The exposed die pad contributes to thermal performance and electrical grounding, so its connection and solder-process controls should follow the manufacturer's package guidance.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XMC4400F100F512ABXUMA1 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XMC4400F100F512BAXUMA1 | XMC4400F100F512BAXQMA1 | XMC4400F100K512BAXUMA1 | XMC4400F100K512BAXQMA1 | XMC4400F100K512ABXUMA1 |
|---|---|---|---|---|---|---|
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| Package | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 | PG-LQFP-100 |
| Processor Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit | 32-bit |
| Product Series | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 | XMC4000 |
मुख्य विशेषताएँ
- Integrated Ethernet connectivity for industrial control (बनामXMC4400F100K512ABXUMA1)
- High processing rate with substantial embedded memory (बनामXMC4400F100F512BAXQMA1)
- Industrial-focused connectivity and control combination (बनामXMC4400F100K512BAXQMA1)
डिज़ाइन नोट्स
Use the manufacturer XMC4400 layout guidance as the basis for the LQFP-100 footprint and exposed-pad implementation. The exposed die pad is connected to common ground, which must share the same potential as VSS, VSSA, and VSSO. Keep high-current switching returns, Ethernet-interface returns, and sensitive analog returns under deliberate control, and verify thermal-via placement and solder-joint inspection criteria during assembly qualification.
Follow the XMC4400 datasheet when planning voltage rails, decoupling, and startup behavior. Place the required bypass capacitors at their designated supply pins with short, low-inductance connections, and separate analog and digital supply routing where the device architecture calls for it. Do not infer permissible voltage or sequencing limits from the 120 MHz headline specification; confirm those limits in the electrical-characteristics tables for the exact ordering derivative.
For Ethernet-connected products, treat the controller, PHY, magnetics, and connector as one controlled subsystem. Apply the PHY vendor's reference layout, maintain consistent return paths, and minimize discontinuities in the differential pair. The MCU's integrated 10/100 Ethernet MAC does not by itself guarantee interface compliance, so validate rise time, impedance, isolation, magnetics selection, and radiated-emissions behavior on the assembled board.
Do not substitute an ordering-code variant solely because its headline text shows the same CPU speed, flash size, and package. Decode the complete Infineon ordering designation and compare temperature grade, qualification, flash revision, pin options, and delivery configuration. During firmware bring-up, confirm the correct clock tree, debugger interface, boot configuration, and peripheral pin mux; an incorrect derivative interpretation can produce apparently random startup or peripheral failures.
अनुपालन जानकारी
The manufacturer product page identifies the device as an industrial microcontroller, but no explicit compliance declarations were included in the product records. Compliance must be confirmed for the exact ordering code and shipment configuration.