XMC4500E144X1024ACXQSA1 - 120MHz Cortex-M4 MCU | Infineon
MPN: XMC4500E144X1024ACXQSA1 ✓ सक्रियXMC4500E144X1024ACXQSA1 अवलोकन
An Arm Cortex-M4 microcontroller is a 32-bit reduced-instruction-set processor designed for embedded control. Positioned within the hierarchy of microcontroller, embedded processor, and semiconductor, it combines deterministic real-time execution with integrated memory, communications peripherals, and general-purpose I/O. The XMC4000 architecture is intended to provide a configurable peripheral set so equipment designers can tailor the device to application-specific industrial requirements.
The principal features of the XMC4500E144X1024ACXQSA1 include a 120 MHz Cortex-M4 core, 1024 kByte of flash, an integrated Ethernet MAC, and a 144-pin LFBGA package. Its 1 MByte flash capacity provides substantial room for application code, configuration data, and protocol stacks. The Ethernet MAC supports designs requiring wired network connectivity without relying on an external network controller.
The XMC4500 combines an industry-standard 32-bit Arm Cortex-M4 core with Infineon industrial peripherals. Its 120 MHz operating frequency supports responsive control loops and communication-intensive firmware. The family-level documentation describes a superset architecture, while the device-specific ordering information identifies the exact flash density, package, and qualification options. All grounds share a common ground potential, and the exposed die pad in applicable packages must connect to that common ground.
Typical applications include industrial Ethernet equipment, factory automation controllers, programmable logic controllers, motor and motion-control systems, industrial communications gateways, and embedded data-acquisition equipment. The combination of 120 MHz processing performance, 1 MByte flash, and Ethernet MAC is particularly suitable for controllers that must execute control software and network protocols concurrently.
For PCB implementation, follow the Infineon PG-LFBGA-144-10 package documentation for land patterns, ball assignments, routing, and exposed-pad connection. Pay particular attention to the common-ground requirement, high-speed Ethernet signal integrity, decoupling placement, and thermal management around the 144-ball land grid. Confirm the complete pin and ball assignments against the manufacturer package drawing before fabrication.
This product overview combines the manufacturer ordering information, package identification, core and memory characteristics, and industrial application context into a design-oriented reference. It also identifies close same-family ordering options for engineers evaluating flash density and grade changes without overlooking the need to verify package-level compatibility.
के लिए ड्रॉप-इन विकल्प XMC4500E144X1024ACXQSA1 — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।
इस सीरीज़ के वेरिएंट
समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं XMC4500E144X1024ACXQSA1 (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Product Type, Flash Memory, Supply Voltage, Architecture.
XMC4500F144F768ACXQMA1
✅ ड्रॉप-इन📋 संदर्भ विकल्प (कैटलॉग में नहीं)
XMC4500F144K1024ACXQMA1
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XMC4500F1024ACXQMA1
✅ ड्रॉप-इनकीमत के लिए संपर्क करें
डेटाशीट देखें →XMC4500E144X1024ACXQSA1 Maximum Ratings और Electrical Characteristics
| Product Type | 32-bit industrial microcontroller |
| Device Family | XMC4000 |
| CPU Core | Arm Cortex-M4 |
| CPU Architecture | 32-bit RISC |
| Maximum CPU Frequency | 120 MHz |
| Flash Memory | 1024 kByte (1M x 8) |
| सप्लाई वोल्टेज | 3.3 V |
| Ethernet Interface | Integrated Ethernet MAC |
| Package Type | PG-LFBGA-144-10 |
| Package Pin Count | 144 pins |
| माउंटिंग प्रकार | Surface Mount |
| Application Classification | Industrial |
| Core Count | Single core |
XMC4500E144X1024ACXQSA1 144 pins पिन कॉन्फ़िगरेशन गाइड
XMC4500E144X1024ACXQSA1 (144 pins पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।
इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: XMC4500E144X1024ACXQSA1.
देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।
सामान्य अनुप्रयोग
XMC4500E144X1024ACXQSA1 के लिए उपयुक्त है 6 अनुप्रयोगs: Industrial Ethernet Controller, Factory Automation Controller, Programmable Logic Controller, Motor and Motion Control, Industrial Communications Gateway, Embedded Data Acquisition System.
Industrial Ethernet Controller
The XMC4500E144X1024ACXQSA1 fits industrial Ethernet controllers that require a 120 MHz Cortex-M4 core, 1024 kByte of flash, and an integrated Ethernet MAC. It can execute control tasks and network firmware within one microcontroller while the 144-pin LFBGA package provides access to a high pin count for digital interfaces and supporting circuitry. A separate network PHY and isolation or coupling network will normally be needed. Designers should preserve the Ethernet differential-pair geometry, provide local decoupling at each supply ball, and confirm the exact package ball assignments before routing the high-density land-grid array.
अनुशंसित
Factory Automation Controller
The XMC4500E144X1024ACXQSA1 is appropriate for factory automation equipment combining deterministic control with Ethernet connectivity. Its 120 MHz Arm Cortex-M4 core provides processing capacity for motion routines, diagnostics, and communication tasks, while 1024 kByte of flash accommodates application code, configuration, and protocol layers. The 144-pin PG-LFBGA-144-10 package supports the numerous digital and analog-adjacent connections commonly found in automation controllers. Layout planning should minimize digital return paths under switching nodes, isolate sensitive analog grounding, and validate thermal performance under the enclosure’s worst-case ambient temperature.
अनुशंसित
Programmable Logic Controller
For a programmable logic controller, the XMC4500E144X1024ACXQSA1 combines a 120 MHz 32-bit Cortex-M4 processor with 1024 kByte of flash and a broad package pin count. This provides a compact platform for sequential control, I/O scanning, diagnostics, and Ethernet-based programming or supervisory functions. The Ethernet MAC allows network-oriented control architectures, although the physical network interface remains a separate design consideration. Firmware should include watchdog handling, safe output states, and brownout recovery, while the PCB should provide uninterrupted decoupling and robust grounding across the LFBGA array.
अनुशंसित
Motor and Motion Control
The XMC4500E144X1024ACXQSA1 can serve as the supervisory controller in motor and motion-control equipment where a 120 MHz Cortex-M4 core and 1024 kByte of flash provide room for control algorithms and diagnostics. It is particularly relevant to systems that also exchange data over Ethernet because the microcontroller includes an Ethernet MAC. External gate drivers, power stages, current sensing, and protection remain required. Place high-current switching paths away from the fine-pitch MCU land pattern, route sensor returns cleanly, and verify timing behavior at the system clock and power-management boundaries.
अनुशंसित
Industrial Communications Gateway
An industrial communications gateway can use the XMC4500E144X1024ACXQSA1 to combine protocol conversion, local control, and Ethernet connectivity. The 120 MHz core supports multiple communication tasks, and the 1024 kByte flash capacity is suitable for protocol stacks and device configuration. The integrated Ethernet MAC reduces the need for a separate host processor, although a PHY, transformer or coupling network, and isolation design remain necessary. Firmware and board validation should include packet-loss recovery, link timing, brownout behavior, and EMI testing with realistic cable and enclosure environments.
अनुशंसित
Embedded Data Acquisition System
The XMC4500E144X1024ACXQSA1 fits embedded data-acquisition systems that must process local measurements and communicate results over an industrial network. Its 120 MHz Cortex-M4 core supports sampling coordination, filtering, diagnostics, and protocol handling, while 1024 kByte of flash provides space for code and calibration data. The 144-pin LFBGA package is useful when several sensor inputs, communication interfaces, and control outputs must coexist. Keep analog front-end routing separate from digital activity, use short ground-return paths, and validate reference accuracy and channel timing before production release.
अनुशंसित
अनुशंसित उत्पादों का सारांश
के लिए इंजीनियरिंग संदर्भ डेटा XMC4500E144X1024ACXQSA1 — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।
चयन गाइड
विकल्पों के साथ तुलना
| पैरामीटर | यह उत्पाद | XMC4500F144F768ACXQMA1 | XMC4500F144K1024ACXQMA1 | XMC4500F144F1024ACXQMA1 |
|---|---|---|---|---|
| Package | PG-LFBGA-144-10 | PG-LFBGA-144-10 | PG-LFBGA-144-10 | PG-LFBGA-144-10 |
| Brand | Infineon Technologies | Infineon Technologies | Infineon Technologies | Infineon Technologies |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| CPU Frequency | 120 MHz | 120 MHz | 120 MHz | 120 MHz |
| Flash Memory | 1024 kByte | 768 kByte | 1024 kByte | 1024 kByte |
| Architecture | 32-bit | 32-bit | 32-bit | 32-bit |
| Supply Voltage | 3.3 V | Not stated | Not stated | Not stated |
| Ethernet MAC | Integrated | Not stated | Not stated | Not stated |
| Ordering Family Code | E | F | F | F |
मुख्य विशेषताएँ
- Exact E-series ordering configuration (बनामXMC4500F144F1024ACXQMA1)
- One megabyte of embedded flash (बनामXMC4500F144F768ACXQMA1)
- Complete 120 MHz Cortex-M4 performance (बनामXMC4500F144K1024ACXQMA1)
डिज़ाइन नोट्स
Use the Infineon PG-LFBGA-144-10 package drawing as the controlling PCB layout document. A 144-ball land-grid array requires short escape routes, controlled via fanout, and careful simultaneous-routing planning. Place decoupling capacitors close to the associated supply balls with minimal loop area, and verify that the exposed die pad is connected to the common ground as required by the package documentation.
Keep Ethernet routing away from switching nodes and high-current return paths. Preserve the geometry and reference-plane continuity required by the selected PHY and coupling network, and avoid adding test pads or split planes beneath the differential pairs unless the signal-integrity design explicitly supports them. Because the XMC4500 contains an Ethernet MAC, validate the complete interface from MCU balls through PHY, isolation, magnetics, and connector.
Plan thermal performance from the device’s actual dissipation and the final PCB construction. The dense LFBGA package benefits from a properly connected exposed pad, adequate ground-plane area, and low thermal resistance through the board. Validate junction temperature under maximum ambient temperature, sustained Ethernet and I/O activity, and the enclosure’s worst-case airflow rather than relying on a nominal laboratory condition.
Do not substitute XMC4500 ordering codes solely because their names contain the same 144 and 1024 characters. The E and F family codes and the SA1 or MA1 grade suffixes can encode differences in qualification, temperature, or device configuration. Compare the complete ordering tables, package drawings, and ball descriptions, then confirm flash capacity, Ethernet functions, clocking, and pin-level connectivity before approving a replacement.
अनुपालन जानकारी
The component is classified as an industrial microcontroller. No specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration was established for this exact ordering code.