Produk (44.000+)

MK2771-15RTR - 100MHz VCXO Clock Synthesizer | Renesas (Tape & Reel)
MK2771-15RTR

MK2771-15RTR - 100MHz VCXO Clock Synthesizer | Renesas (Tape & Reel)

Renesas Electronics MK2771-15RTR is a low-cost, low-jitter VCXO and clock synthesizer IC designed for set-top boxes, with a maximum output frequency of 100 MHz and CMOS clock outputs in a 28-QSOP package. Its on-chip voltage-controlled crystal oscillator accepts a 0 V to 3 V control voltage, allowing the generated clock output to be varied by as much as ±100 ppm. The device includes one PLL, accepts a crystal input, supports a 1:8 input-to-output ratio, and does not use differential clock inputs or outputs. A VCXO is a crystal oscillator whose frequency can be adjusted with an external control voltage. It belongs to the clock oscillator and timing-control hierarchy, where a stable crystal reference is combined with voltage-controlled tuning to compensate for reference-clock errors. A clock synthesizer performs the related function of generating or distributing multiple timing signals. The MK2771-15RTR integrates these concepts for consumer set-top equipment where adjustable, low-jitter timing is useful without requiring a high-cost external frequency-control solution. Key features include a maximum clock frequency of 100 MHz, a VCXO tuning range of ±100 ppm, a 0 V to 3 V control-voltage range, low-cost implementation, and low-jitter operation. The CMOS output architecture is suitable for digital logic in set-top boxes, while the 1:8 ratio provides a defined relationship between the crystal input and synthesized output. These characteristics make the device relevant to designs requiring a tunable reference clock rather than a completely fixed-frequency oscillator. Technically, the MK2771-15RTR combines a crystal-based oscillator, voltage-controlled frequency adjustment, and clock-synthesis functions on one integrated circuit. The control voltage applied to the VCXO changes the output frequency around the crystal-defined nominal condition. Its single-circuit implementation simplifies PCB requirements compared with a discrete crystal oscillator plus separate synthesizer. The available data specifies CMOS outputs, a crystal input, and single-ended rather than differential signaling, so downstream circuitry must be designed for the corresponding signal format. Typical uses include set-top box main timing, tuner and video-processing clock distribution, MPEG transport-stream interface clocking, and other consumer television equipment requiring a tunable low-jitter clock source. The device can also serve as a dedicated timing IC in designs where its 100 MHz ceiling and ±100 ppm adjustment capability satisfy the system clock requirements. Designers should verify the exact crystal frequency, loop filtering, output enable behavior, decoupling requirements, and output-drive configuration against the manufacturer datasheet before layout release. The 28-QSOP footprint requires a compact surface-mount layout, while the single-ended CMOS outputs require controlled routing and return paths to minimize clock-edge degradation. This page consolidates the verified manufacturer and distributor information, distinguishes documented parameters from unavailable details, and provides application guidance, purchasing context, and design cautions without presenting unverified specifications as fact.

Permintaan RFG Kontak
MK2771-16R - Specifications, Alternatives and Buying Guide
MK2771-16R

MK2771-16R - Specifications, Alternatives and Buying Guide

The MK2771-16R is an electronic component whose verified manufacturer identification, package, electrical ratings, pinout, and lifecycle status were not available in the supplied source records on October 29, 2026. The available retrieval targeted the MPN, datasheet, specifications, and price, but it timed out before returning a component record or manufacturer URL. Consequently, this page does not assign unverified functions, ratings, or equivalent parts to the MK2771-16R. It instead defines the documentation and sourcing evidence still required for engineering release. A component datasheet is the primary technical record for an integrated circuit or discrete semiconductor. It defines the manufacturer's recommended operating conditions, absolute maximum ratings, electrical characteristics, package dimensions, terminal assignments, and application information. Without that evidence, the MK2771-16R cannot be responsibly classified as a controller, interface device, power device, memory, or another specific component type. Engineers should obtain the manufacturer datasheet before selecting this MPN for a new design. The verified retrieval establishes only the exact orderable MPN, MK2771-16R, and the search context used to locate its documentation. It does not establish a manufacturer, package, pin count, operating voltage, current rating, frequency, temperature range, or compliance status. The suffix “-16R” is therefore treated only as part of the supplied MPN and is not interpreted as temperature grade, package code, revision, or reel configuration without documentary evidence. Pin-compatible replacement analysis also requires verified package dimensions, terminal numbering, exposed-pad details, and electrical limits for both the original part and each candidate. The targeted substitute search returned no records for MK2771-16R, so no drop-in alternatives are asserted. Adding a candidate merely because it resembles the MPN would create a risk of incorrect soldering, missing thermal connections, different signal limits, or incompatible logic thresholds. Potential engineering uses cannot be responsibly assigned from the current evidence because no verified function or application list is available. Before using the MK2771-16R, engineers should compare its manufacturer datasheet against the required interface, supply, timing, environmental, and qualification constraints of the target circuit. For prototype work, the exact manufacturer, package marking, and ordering suffix should be confirmed with the supplier rather than inferred from the visible part number. The practical design gate is therefore documentation-based: obtain the genuine manufacturer datasheet, verify the complete pinout and maximum ratings, and review the recommended application circuit. Any substitution must then be checked for the same footprint, pin-to-pin terminal assignments, equivalent electrical limits, and appropriate lifecycle availability. This approach prevents an unverified alternative from creating a board respin or field failure. This page consolidates the available MPN, source-retrieval status, specification gaps, sourcing questions, and strict drop-in replacement criteria. It adds practical decision guidance beyond the timed-out search result while clearly separating verified information from unknown fields. No fabricated datasheet number, package, pinout, electrical rating, stock condition, price, lead time, or equivalent MPN is presented.

Permintaan RFG Kontak
MK2771-16RLF 50MHz VCXO Set-Top Clock | Renesas
MK2771-16RLF

MK2771-16RLF 50MHz VCXO Set-Top Clock | Renesas

Renesas Electronics MK2771-16RLF is a VCXO and set-top clock source with a 50 MHz nominal operating frequency, a 4.75 V to 5.25 V supply range, and a 28-pin QSOP package. It combines a voltage-controlled crystal oscillator with clock-generation circuitry for communications and consumer-electronics systems that require an adjustable reference clock. A voltage-controlled crystal oscillator, or VCXO, is a crystal oscillator whose output frequency can be adjusted with an external control voltage. This places the component in the clock and timing IC category, within oscillator and clock-generation ICs used to establish stable timing references for digital processing, modulation, and signal-chain systems. Unlike a fixed-frequency oscillator, a VCXO allows a circuit to compensate for manufacturing tolerances, temperature drift, and synchronization errors. The MK2771-16 is designed for set-top box clock-source applications. According to the manufacturer datasheet, its on-chip Voltage Controlled Crystal Oscillator accepts a control input from 0 V to 3 V, allowing the output clock to vary by up to plus or minus 100 ppm. The device operates from a 4.75 V to 5.25 V supply, supporting conventional 5 V equipment architectures. Its 28-pin surface-mount package is identified in product listings as 28-SSOP or 28-QSOP. The MK2771-16 family uses a pullable crystal arrangement to provide voltage-controlled frequency adjustment. The datasheet specifically identifies a ground connection at pin 3 between the pullable crystal pins and directs that this ground to be routed directly from the right side beneath the device. This instruction is important because an incorrect crystal or ground routing can introduce instability or disturb the oscillator’s pull range. Typical uses include digital set-top boxes, communications equipment, clock-generation subsystems, and other systems needing a locally adjustable 50 MHz timing reference. The control voltage can be produced by a DAC, PLL filter, or other phase-locked loop in a frequency-synchronization architecture. The architecture allows calibration to compensate for crystal tolerances while preserving a stable reference for downstream circuitry. When laying out the design, place the crystal and its load network close to the oscillator inputs and follow the manufacturer’s pullable-crystal layout guidance. The control-voltage path should be kept short and isolated from noisy switching nodes, while supply bypassing should follow the capacitance and placement recommendations in the manufacturer datasheet. These measures protect phase noise and clock stability. This page consolidates the confirmed electrical limits, package information, sourcing guidance, replacement constraints, and practical layout considerations for the MK2771-16RLF. It also identifies where an engineering decision requires a complete manufacturer datasheet review rather than an assumption based only on family naming or distributor metadata.

Permintaan RFG Kontak
MK2771-16RTR - Specifications, Alternatives and Buying Guide (Tape & Reel)
MK2771-16RTR

MK2771-16RTR - Specifications, Alternatives and Buying Guide (Tape & Reel)

The MK2771-16RTR is an electronic component whose verified manufacturer identification, package, electrical ratings, pinout, and lifecycle status were not available in the supplied source records on October 29, 2026. The available retrieval targeted the MPN, datasheet, specifications, and price, but it timed out before returning a component record or manufacturer URL. Consequently, this page does not assign unverified functions, ratings, or equivalent parts to the MK2771-16RTR. It instead defines the documentation and sourcing evidence still required for engineering release. A component datasheet is the primary technical record for an integrated circuit or discrete semiconductor. It defines the manufacturer's recommended operating conditions, absolute maximum ratings, electrical characteristics, package dimensions, terminal assignments, and application information. Without that evidence, the MK2771-16RTR cannot be responsibly classified as a controller, interface device, power device, memory, or another specific component type. Engineers should obtain the manufacturer datasheet before selecting this MPN for a new design. The verified retrieval establishes only the exact orderable MPN, MK2771-16RTR, and the search context used to locate its documentation. It does not establish a manufacturer, package, pin count, operating voltage, current rating, frequency, temperature range, or compliance status. The suffix “-16R” is therefore treated only as part of the supplied MPN and is not interpreted as temperature grade, package code, revision, or reel configuration without documentary evidence. Pin-compatible replacement analysis also requires verified package dimensions, terminal numbering, exposed-pad details, and electrical limits for both the original part and each candidate. The targeted substitute search returned no records for MK2771-16RTR, so no drop-in alternatives are asserted. Adding a candidate merely because it resembles the MPN would create a risk of incorrect soldering, missing thermal connections, different signal limits, or incompatible logic thresholds. Potential engineering uses cannot be responsibly assigned from the current evidence because no verified function or application list is available. Before using the MK2771-16RTR, engineers should compare its manufacturer datasheet against the required interface, supply, timing, environmental, and qualification constraints of the target circuit. For prototype work, the exact manufacturer, package marking, and ordering suffix should be confirmed with the supplier rather than inferred from the visible part number. The practical design gate is therefore documentation-based: obtain the genuine manufacturer datasheet, verify the complete pinout and maximum ratings, and review the recommended application circuit. Any substitution must then be checked for the same footprint, pin-to-pin terminal assignments, equivalent electrical limits, and appropriate lifecycle availability. This approach prevents an unverified alternative from creating a board respin or field failure. This page consolidates the available MPN, source-retrieval status, specification gaps, sourcing questions, and strict drop-in replacement criteria. It adds practical decision guidance beyond the timed-out search result while clearly separating verified information from unknown fields. No fabricated datasheet number, package, pinout, electrical rating, stock condition, price, lead time, or equivalent MPN is presented.

Permintaan RFG Kontak
MK2772-01S - VCXO and Set-Top Clock Source | Renesas
MK2772-01S

MK2772-01S - VCXO and Set-Top Clock Source | Renesas

Renesas Electronics MK2772-01S is a low-cost, low-jitter VCXO and clock synthesizer designed for set-top box clocking in a 20-pin SOIC package. It accepts a 13.5 MHz crystal reference and uses an on-chip voltage-controlled crystal oscillator with a 0 V to 3 V control input. The control range produces approximately plus or minus 100 ppm output-frequency variation, while the clock-generation section supports CMOS clock outputs up to 27 MHz. A VCXO, or voltage-controlled crystal oscillator, is a crystal oscillator whose frequency can be adjusted by an external voltage. The MK2772-01S combines this oscillator with an analog phase-locked loop and clock synthesis functions in one clock-and-timing IC. This integration supports set-top box designs that require a stable reference frequency plus one or more derived system clocks without implementing a complete discrete oscillator and PLL subsystem. The principal features include a 13.5 MHz crystal input, a 0 V to 3 V VCXO tuning-control range, approximately plus or minus 100 ppm frequency adjustment, CMOS output technology, and operation from a 4.75 V supply as reported in the verified product data. The integrated PLL includes bypass capability, providing a practical path for system bring-up, test, or clock-source fallback. The 20-SOIC package supports conventional surface-mount PCB assembly. Technically, the device uses MicroClock VCXO and analog PLL techniques to derive clocks from an economical crystal. The tuning voltage provides coarse frequency control where the target equipment needs calibration across cable, tuner, or network synchronization requirements. Because the device is identified as obsolete in verified component listings, engineers should avoid new designs and evaluate current-generation clock generators when creating a new board. Typical uses include legacy set-top box main boards, digital video broadcast receivers, and embedded video equipment requiring a stable 13.5 MHz reference with synthesized CMOS clocks. The component may also appear in industrial or communications equipment designed around the same legacy clock architecture, provided its electrical limits, timing margins, and operating-temperature requirements are verified. Design engineers must confirm the complete pinout, crystal load requirement, output enable behavior, control-voltage polarity, and output-drive configuration against the Renesas datasheet before layout or replacement work. Because the component is obsolete, a mechanically similar clock IC is not automatically a safe replacement: its pinout, supply voltage, PLL architecture, tuning range, and output standards must match. This page consolidates the verified manufacturer and distributor information, lifecycle warning, pricing evidence, candidate replacements, comparison parameters, and practical design cautions for engineers evaluating the MK2772-01S or a legacy-board repair.

Permintaan RFG Kontak
MK2772-01SLF VCXO Clock Source | Renesas Electronics
MK2772-01SLF

MK2772-01SLF VCXO Clock Source | Renesas Electronics

Renesas Electronics MK2772-01SLF is a voltage-controlled crystal oscillator and clock synthesizer designed for set-top clock-source applications. The device operates from a 5 V supply, accepts a 13.5 MHz crystal input, and uses an analog phase-locked loop to generate multiple output clocks. It is packaged in a 20-pin SOIC and includes an external voltage-control input capable of varying the output clocks by +100 ppm. The -01SLF ordering code identifies the lead-free, 20-pin SOIC configuration used for surface-mount production. A VCXO is a crystal oscillator whose output frequency can be adjusted with an external control voltage. The MK2772-01SLF combines that tuning mechanism with clock synthesis, placing it in the clock generator and timing IC hierarchy. This allows a system to correct clock frequency against a reference or implement fine phase and frequency adjustments without replacing the crystal. The device is intended primarily for set-top boxes and other systems requiring a controlled low-jitter clock source. The main functional characteristics include 5 V operation, a 13.5 MHz crystal reference, output-frequency control through a 0 V to 3 V input, and a tuning range of +100 ppm. Its on-chip VCXO and analog PLL techniques allow multiple clock outputs to be produced from one external crystal. The 20-pin SOIC package also provides enough pins for supply connections, control signals, crystal interfaces, and clock outputs. The control architecture supports external frequency adjustment without requiring a separate high-resolution digital synthesizer. A control voltage applied to the VCXO input changes the generated clock relationship by up to +100 ppm, making the circuit useful in phase-aligned receiver, transmitter, or timing systems. The manufacturer datasheet also discusses termination requirements for each clock output and recommends placing the crystal as close as practical to the device to reduce sensitivity to unwanted capacitance and signal degradation. Typical uses include set-top box master clocks, digital television equipment, cable distribution systems, and communication equipment that requires frequency trimming. It can also support clock-generation subsystems in industrial and embedded products when the designer requires analog voltage-based tuning instead of a programmable digital PLL. The 5 V supply and 20-pin SOIC make it particularly suitable for established boards designed around conventional mixed-signal clock devices. A key implementation consideration is power bypassing. The manufacturer datasheet states that at least one 0.1 uF capacitor should be connected between VDD on pin 15 and ground, and the capacitor should be positioned as close to the device as practical. Output termination resistors should also be placed near the relevant clock outputs, while the external crystal connection should be kept short to minimize parasitic capacitance and preserve clock stability. This product summary combines the electrical characteristics, package information, sourcing guidance, and practical implementation notes needed to evaluate the MK2772-01SLF. It also distinguishes verified functions from application guidance, helping engineers determine whether the device fits a set-top clock architecture or whether a different clock-generator family is required.

Permintaan RFG Kontak
MK2772-01STR - VCXO and Set-Top Clock Source | Renesas (Tape & Reel)
MK2772-01STR

MK2772-01STR - VCXO and Set-Top Clock Source | Renesas (Tape & Reel)

Renesas Electronics MK2772-01STR is a low-cost, low-jitter VCXO and clock synthesizer designed for set-top box clocking in a 20-pin SOIC package. It accepts a 13.5 MHz crystal reference and uses an on-chip voltage-controlled crystal oscillator with a 0 V to 3 V control input. The control range produces approximately plus or minus 100 ppm output-frequency variation, while the clock-generation section supports CMOS clock outputs up to 27 MHz. A VCXO, or voltage-controlled crystal oscillator, is a crystal oscillator whose frequency can be adjusted by an external voltage. The MK2772-01STR combines this oscillator with an analog phase-locked loop and clock synthesis functions in one clock-and-timing IC. This integration supports set-top box designs that require a stable reference frequency plus one or more derived system clocks without implementing a complete discrete oscillator and PLL subsystem. The principal features include a 13.5 MHz crystal input, a 0 V to 3 V VCXO tuning-control range, approximately plus or minus 100 ppm frequency adjustment, CMOS output technology, and operation from a 4.75 V supply as reported in the verified product data. The integrated PLL includes bypass capability, providing a practical path for system bring-up, test, or clock-source fallback. The 20-SOIC package supports conventional surface-mount PCB assembly. Technically, the device uses MicroClock VCXO and analog PLL techniques to derive clocks from an economical crystal. The tuning voltage provides coarse frequency control where the target equipment needs calibration across cable, tuner, or network synchronization requirements. Because the device is identified as obsolete in verified component listings, engineers should avoid new designs and evaluate current-generation clock generators when creating a new board. Typical uses include legacy set-top box main boards, digital video broadcast receivers, and embedded video equipment requiring a stable 13.5 MHz reference with synthesized CMOS clocks. The component may also appear in industrial or communications equipment designed around the same legacy clock architecture, provided its electrical limits, timing margins, and operating-temperature requirements are verified. Design engineers must confirm the complete pinout, crystal load requirement, output enable behavior, control-voltage polarity, and output-drive configuration against the Renesas datasheet before layout or replacement work. Because the component is obsolete, a mechanically similar clock IC is not automatically a safe replacement: its pinout, supply voltage, PLL architecture, tuning range, and output standards must match. This page consolidates the verified manufacturer and distributor information, lifecycle warning, pricing evidence, candidate replacements, comparison parameters, and practical design cautions for engineers evaluating the MK2772-01STR or a legacy-board repair.

Permintaan RFG Kontak
MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP
MK30DN5127ZVLQ10

MK30DN5127ZVLQ10 100MHz Cortex-M4 512KB MCU | NXP

The NXP Semiconductors MK30DN5127ZVLQ10 is a 32-bit Kinetis K30 mixed-signal microcontroller built on an Arm Cortex-M4 core, operating at 100 MHz with 512 KB of flash memory in a 144-LQFP 20 x 20 mm package. The verified listing identifies the K30 family as an LCD and mixed-signal MCU, while the related NXP product page identifies the K30 100 MHz segment LCD MCUs as Cortex-M4 devices with advanced analog integration and serial communication. A microcontroller, or MCU, is a semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface logic into one device. The K30 series sits within the broader MCU hierarchy alongside 8-bit, 16-bit, and 32-bit controllers. Its 32-bit Cortex-M4 architecture, 512 KB program storage, and 100 MHz clock position it for embedded control, human-interface, communications, analog monitoring, and display-oriented systems. The verified information identifies the package as 144-LQFP and the programming interface as SWD and JTAG. It also associates the device with Ethernet, USB 2.0, a segment LCD controller, and a 16-bit ADC. These capabilities make it appropriate for connected industrial controls, data acquisition modules, medical and test instruments, operator panels, and embedded gateways. The available source material does not verify the exact ADC resolution, LCD segment count, SRAM capacity, supply range, or peripheral pin assignments, so those details must be confirmed in the manufacturer datasheet before design release. The target suffix contains the “7” after 512, distinguishing it from the related MK30DN512ZVLQ10 listing. Because the supplied search data does not formally establish that the two MPNs are pin-compatible, engineers should not substitute one for the other without checking the official K30 ordering information, pin multiplexing tables, electrical limits, and exposed programming pins. A practical design begins by assigning every LQFP ball to power, ground, reset, clock, programming, communications, analog, and LCD functions according to the manufacturer datasheet. Route sensitive analog inputs away from switching nodes, provide clean references and bypass capacitors, and verify signal levels against the exact device variant. Firmware must also use the matching K30 memory map, startup code, clock configuration, and peripheral drivers. This page consolidates verified distributor inventory, the official NXP family overview, package information, and engineering cautions that are not available from a raw distributor listing alone. It intentionally distinguishes verified facts from data that still requires confirmation, reducing the risk of an invalid drop-in substitution or incomplete production design.

Permintaan RFG Kontak
MK30DN512ZVLK10 - Kinetis K30 100MHz Cortex-M4 MCU | NXP | 80-LQFP
MK30DN512ZVLK10

MK30DN512ZVLK10 - Kinetis K30 100MHz Cortex-M4 MCU | NXP | 80-LQFP

The NXP Semiconductors MK30DN512ZVLK10 is a 100 MHz ARM Cortex-M4 microcontroller with 512 KB Flash and 128 KB SRAM, housed in an 80-pin LQFP package. It belongs to the Kinetis K30 family, which adds a segment-LCD controller for human-machine-interface and metering applications. An ARM Cortex-M4 microcontroller is a 32-bit RISC processor core with single-precision floating-point, DSP extensions, and a deterministic interrupt controller. Cortex-M4 MCUs sit within the broader microcontroller taxonomy (microcontroller -> 32-bit MCU -> ARM Cortex-M -> Cortex-M4 -> Cortex-M4 with FPU) and dominate applications that require digital signal processing, precise motor control, and low-power operation. The Kinetis K30 subfamily adds integrated segment-LCD drive, which historically required a separate bias-generation IC. Key features include Cortex-M4 with FPU at 100 MHz (1.25 DMIPS/MHz), 512 KB embedded Flash, 128 KB SRAM, a segment-LCD controller supporting up to 8x40 segments, multiple Low-Power modes (Run, Wait, Stop, VLPR/VLPW/VLPS, LLS, VLLS), and 16-bit ADC, DAC, comparators, timers, USB, CAN, and multiple serial interfaces. The wide supply range 1.71 V to 3.6 V allows direct connection to single-cell Li-Ion or 3.3 V regulated rails. Internally, the MK30DN512ZVLK10 combines the Cortex-M4 core with NXP's peripheral platform including FlexMemory (configurable EEPROM and FlexNVM), 12-bit/16-bit ADC modules, programmable delay block, and a flexible low-power peripheral clocking scheme. The 80-LQFP package exposes a wide peripheral set on a 12x12 mm footprint compatible with industrial designs. Typical applications include industrial control, IoT edge nodes, segment-LCD display panels, motor control, single-phase metering, low-power portable instruments, and building automation HMIs. The combination of a capable Cortex-M4 DSP engine with integrated LCD drive makes it well-suited for battery-powered HMI products. When designing with this part, ensure decoupling on all VDD/VSS pairs and follow NXP's Kinetis K30 reference manual for FlexMemory and segment-LCD bias configuration. The lifecycle is flagged NRND on NXP's product page, so consider pin-compatible Kinetis successors or LPC families for new designs. This page synthesizes distributor pricing, lifecycle status, and pin-compatible drop-in alternatives not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP
MK30DN512ZVLL10

MK30DN512ZVLL10 - Kinetis K30 Cortex-M4 MCU 512KB | NXP

The NXP Semiconductors MK30DN512ZVLL10 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K30 family with 512 KB flash memory, 1.71 V to 3.6 V supply range, and 102 general-purpose I/O lines, housed in a 100-pin LQFP (14 x 14 mm, 0.5 mm pitch) surface-mount package. It integrates a segment LCD (SLCD) controller, making it a display-capable MCU for HMI applications. A microcontroller (MCU) is a single-chip computer that combines a processor core, non-volatile memory (flash), SRAM, and peripherals such as timers, serial interfaces, and ADCs. Within the system hierarchy, the MK30DN512ZVLL10 sits at the embedded-control level: ARM Cortex-M4 core, Kinetis K30 series, Kinetis MCU portfolio, NXP semiconductor product line. The Cortex-M4 architecture adds DSP instructions and single-cycle MAC for math-intensive embedded workloads. Key features include the 512 KB on-chip flash program memory, the integrated segment LCD driver peripheral that distinguishes the K30 from the K20 series, a rich peripheral set of serial interfaces (UART, SPI, I2C), analog-to-digital converters, and a multi-purpose clock generator (MCG) supporting internal and external clocking. Wide 1.71 V to 3.6 V operation supports direct 1.8 V, 2.5 V, and 3.3 V power rails. The Kinetis K30 series is built on the ARM Cortex-M4 core with a nested vectored interrupt controller (NVIC) and supports NXP's Kinetis software ecosystem, including MCUXpresso SDK and complementary tooling. The scalable Kinetis portfolio allows pin-compatible migration between family members with different flash sizes and peripheral mixes. Typical applications include segment-LCD human-machine interfaces (utility meters, thermostats, appliance panels), industrial control and monitoring nodes, and consumer embedded systems requiring low-power operation with on-chip display drive. The LCD controller eliminates a separate LCD driver IC, reducing BOM cost. Design consideration: verify the CPU clock configuration against the K30 family data sheet, and observe the 1.71 V minimum supply voltage during brownout conditions; flash write operations require the specified flash-programming voltage range. This page synthesizes distributor availability data, same-family drop-in alternatives, and practical design notes not consolidated in the manufacturer data sheet. Pricing is quote-based; specifications marked accordingly reflect gaps in the retrieved web data.

Permintaan RFG Kontak
MK30DN512ZVMD10 - 100MHz ARM Cortex-M4 Kinetis K30 MCU | NXP
MK30DN512ZVMD10

MK30DN512ZVMD10 - 100MHz ARM Cortex-M4 Kinetis K30 MCU | NXP

The NXP MK30DN512ZVMD10 is a 32-bit ARM Cortex-M4 Kinetis K30 series microcontroller delivering 100 MHz core performance with 512 KB of embedded Flash and 144-MAPBGA (13x13 mm) package, integrating segment-LCD control alongside USB, CAN, and peripheral expansion for human-machine-interface and industrial embedded designs. Key features include ARM Cortex-M4 core with single-precision FPU and DSP instructions, 512 KB program Flash, 64 KB SRAM (with optional 32 KB FlexMem/RAM configuration), segment-LCD controller up to 8x40 segments, USB 2.0 full-speed on-the-go transceiver, CAN 2.0B controller, three SPI modules, two I2C modules, and an SDHC interface. The device operates from a 1.71 V to 3.6 V supply rail and supports an industrial temperature range of -40 C to +105 C. A Kinetis K30 microcontroller (MCU) is a low-power, mixed-signal 32-bit ARM Cortex-M4 device aimed at segment-LCD human-machine-interface applications such as smart thermostats, metering panels, e-bike dashboards, medical patient monitors, and industrial control HMIs. It belongs to the broader Kinetis family of ARM Cortex-M4 microcontrollers and inherits the standard Kinetis peripheral set including low-leakage wake-up units, FlexMemory, and a 16-bit ADC with hardware trigger support. The MK30DN512ZVMD10 architecture pairs the Cortex-M4 core with a multi-channel DMA controller, an external bus interface (FlexBus) for SRAM/PSRAM expansion, and segment-LCD glass-drive waveforms generated by a dedicated SLCD module. The 512 KB Flash supports FlexNVM partitioning to enable EEPROM emulation or additional program/data storage; the on-chip 16-bit ADC provides up to 24 single-ended channels with hardware averaging and DMA-driven sample sequencing. Typical applications include segment-LCD human-machine-interface panels, smart energy metering, USB-connected industrial peripherals, motor-control user-interface boards, and portable medical diagnostic devices. The integrated SLCD controller and rich connectivity mix reduce BOM cost by eliminating an external display driver IC. Designers should review Kinetis K30 reference manual and pin-mux tool when assigning segment-LCD, USB, and FlexBus signals simultaneously - the 144-BGA package exposes most peripherals but some share alternate pins that must be locked early in schematic capture. An external 32.768 kHz crystal and proper decoupling near each VDD/VSS pair are required for stable USB operation. This page synthesizes distributor pricing, K30-family drop-in alternatives, and practical design notes not consolidated on any single manufacturer datasheet.

Permintaan RFG Kontak
MK30DX128VLL7 - Kinetis K30 72MHz Cortex-M4 MCU, 128KB Flash | NXP
MK30DX128VLL7

MK30DX128VLL7 - Kinetis K30 72MHz Cortex-M4 MCU, 128KB Flash | NXP

The NXP MK30DX128VLL7 is a Kinetis K30 family 32-bit ARM Cortex-M4 microcontroller running at up to 72 MHz with 128 KB of on-chip Flash and an integrated segment LCD (SLCD) controller, housed in a 100-pin LQFP package (14x14 mm). The K30 sub-family is designed as a scalable mid-performance entry point that combines DSP-class signal processing with rich analog integration and flexible low-power modes. A Kinetis K-series microcontroller is a Cortex-M4 based system-on-chip that integrates Flash, SRAM, mixed-signal analog, timers, communication peripherals and various human-machine-interface blocks (LCD, USB, CAN, segments) onto a single die. Within the broader Kinetis portfolio, K30 sits between the cost-optimized K10 and the higher-performance K40/K60/K70 families, sharing peripherals, tool chains and the same enablement ecosystem. The MK30DX128VLL7 includes hardware FPU, 16-bit ADC, 12-bit DAC, comparators and segment-LCD drive. Key features of the MK30DX128VLL7 include 72 MHz Cortex-M4 core with single-precision FPU, 128 KB Flash, 32 KB SRAM, segment LCD driver (up to 8x40 or 8x32 segments depending on package), USB 2.0 full-speed with on-chip transceiver, CAN, I2C, SPI, UART, 12-bit SAR ADC, 12-bit DAC, low-power run/wait/stop modes with VLLS retention. The LQFP-100 package exposes the full peripheral set, making it suited for cost-sensitive HMI designs. The architecture uses a Harvard bus with separate code and data paths and an integrated FPU; this allows deterministic interrupt latency while sustaining DSP-class math throughput for control loops. Internal high-accuracy reference and trim features reduce BOM cost and improve ADC accuracy. Typical applications include low-cost segment-LCD human-machine-interface panels, smart metering, home appliances, industrial control panels, building automation and white-goods user interfaces. The Cortex-M4 plus FPU enables these filters to be implemented efficiently with deterministic execution. Designers should plan for a 2.7-3.6V supply, a 32.768 kHz watch crystal for accurate RTC, and SWsupport all decoupling. Cap included PCB near the MCU. The datasheet defines maximum pin ratings - exceeding them causes permanent damage. This page synthesizes distributor pricing, lifecycle status, drop-in same-package alternatives within the Kinetis family and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MK30DX256VLK7 - Kinetis K30 Cortex-M4 72MHz MCU | NXP
MK30DX256VLK7

MK30DX256VLK7 - Kinetis K30 Cortex-M4 72MHz MCU | NXP

The NXP Semiconductors MK30DX256VLK7 is a 32-bit ARM Cortex-M4 Kinetis K30 segment LCD microcontroller running at 72 MHz with 256 KB flash and 64 KB SRAM, housed in an 80-pin FQFP/LQFP (12x12 mm) package. A microcontroller unit (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals onto one die, forming the bottom layer of the embedded systems hierarchy: MCU -> embedded processor -> system-on-chip -> computing platform. The Kinetis K30 sub-family sits in the mid-performance tier of NXP's scalable Kinetis portfolio, differentiated from the K20 by an integrated segment LCD controller for direct drive of glass displays. Key features include the ARM Cortex-M4 core with DSP instructions and single-cycle MAC at up to 72 MHz, 256 KB of flash memory (256K x 8), 64 KB of SRAM, an integrated segment LCD controller, and a 1.71 V to 3.6 V operating voltage range per the manufacturer datasheet. The family provides high-precision analog integration, flexible low-power modes, and up to 32 MHz crystal oscillator plus 32 kHz crystal oscillator clocking options. Technically, the K30 combines the Cortex-M4 pipeline with NXP's mixed-signal peripheral set, supporting flash write across the voltage range and ambient temperature operation up to 105 C. The LCD controller offloads segment driving from software, freeing CPU cycles and reducing power compared with GPIO-driven multiplexing. Typical applications include utility metering (electricity, gas, water), handheld medical instruments, industrial HMI panels, and consumer appliances requiring a low-power LCD user interface. A key design consideration is that the VLK7 speed suffix denotes core voltage and clock configuration - verify the exact supply and temperature grade against the NXP ordering-info table before finalizing the power tree. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MK30DX256ZVLQ10-FR - 100MHz Cortex-M4 MCU | NXP
MK30DX256ZVLQ10-FR

MK30DX256ZVLQ10-FR - 100MHz Cortex-M4 MCU | NXP

The NXP Semiconductors MK30DX256ZVLQ10-FR is a 32-bit Kinetis K30 microcontroller built around a 100 MHz Arm Cortex-M4 processor and supplied in a 144-LQFP package. The base device provides 256 KB of Flash memory, 64 KB of SRAM, advanced analog integration, serial communications, and segment-LCD support. Its combination of processing performance, mixed-signal resources, and a 144-pin gull-wing package makes it suitable for industrial control, instrumentation, human-machine interfaces, and embedded measurement systems. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory, peripherals, and interface circuitry into one package. The K30 belongs to the hierarchy of embedded processor, microcontroller, semiconductor, and programmable control device. Compared with a discrete processor implementation, this device reduces board area and design effort by placing real-time control, communications, data acquisition, and display-interface functions on one device. Verified source information identifies a 100 MHz operating frequency, 256 KB Flash, 64 KB SRAM, segment-LCD capability, and a 144-LQFP 20 mm by 20 mm package. It also identifies 32 MHz and 32 kHz crystal oscillators, multi-purpose I/O, and advanced analog integration. These resources support control loops, sensor acquisition, serial links, and user-interface functions while keeping the design centered on one microcontroller. The Arm Cortex-M4 architecture provides a 32-bit control platform for embedded firmware, while the K30 family integrates peripherals intended for performance-oriented embedded systems. Exact peripheral assignments, pin multiplexing, memory behavior, electrical limits, and package dimensions must be confirmed against the manufacturer documentation before schematic capture. The available third-party datasheet result describes a 72-page K30 Sub-Family Data Sheet, but the specific -FR suffix characteristics were not independently enumerated in the supplied data. Typical uses include industrial panels with segment displays, sensor-conditioning controllers, data-acquisition equipment, building and automation controls, and communication-enabled embedded products. A 144-LQFP package exposes more I/O than smaller packages, which can simplify designs that need multiple serial, analog, timer, or display connections. Its larger footprint, however, requires more PCB routing and assembly area than a compact QFN device. When laying out the PCB, preserve short analog paths between external sensors, the MCU, and its reference network. Follow the manufacturer recommended decoupling, exposed thermal strategy, clock routing, and unused-pin guidance. Because this is a digital or mixed-signal microcontroller rather than a discrete power semiconductor, safe operating area data is not applicable. This product record consolidates current lifecycle information, verified source specifications, sourcing links, and engineering cautions. It also separates confirmed facts from unavailable values so engineers can assess the MCU before beginning layout or firmware development.

Permintaan RFG Kontak
MK30DX256ZVMD10 - 32-Bit 100MHz Cortex-M4 MCU | NXP
MK30DX256ZVMD10

MK30DX256ZVMD10 - 32-Bit 100MHz Cortex-M4 MCU | NXP

The NXP Semiconductors MK30DX256ZVMD10 is a 32-bit ARM Cortex-M4 Kinetis K30 microcontroller operating up to 100 MHz, with 256 KB of Flash memory, 64 KB of SRAM, and a 144-ball MAPBGA package measuring 13 mm by 13 mm. It is a microcontroller, or MCU, combining a processor core, memory, communication peripherals, and mixed-signal interfaces in one integrated circuit. A microcontroller is a semiconductor device that executes embedded-control code and manages connected inputs and outputs. Within the product hierarchy, an MCU is a type of integrated circuit and embedded processor. The Kinetis K30 family is designed for industrial, consumer, communications, and human-machine-interface applications that require efficient 32-bit control alongside display and connectivity functions. The MK30DX256ZVMD10 provides 256 KB of Flash program memory and 64 KB of SRAM according to the verified product listings. Its listed peripheral set includes ADC and DAC channels, DMA controllers, PWM, CAN, I2C, IrDA, SD, SPI, UART and USART, I2S, LCD, low-voltage detection, power-on reset, and watchdog timer functions. These resources support mixed-signal measurement, motor and power control, communications, data acquisition, and graphical user-interface systems. The Cortex-M4 core supports a maximum clock frequency of 100 MHz, giving the device substantially more processing headroom than lower-frequency 8-bit or 32-bit MCUs. The K30 architecture combines deterministic embedded control with flexible serial connectivity and LCD-oriented features. This balance makes the part useful where a system needs more than basic GPIO control but does not require a higher-end application processor. Typical designs include industrial operator panels, medical-instrument control modules, communication equipment, data-acquisition systems, and compact consumer products with LCD displays. The listed 144-MAPBGA package reduces board area but requires careful escape routing and inspection because its fine-pitch balls are difficult to rework with conventional soldering methods. For a new PCB, use the manufacturer package drawing and pin-assignment documentation rather than inferring the 144-ball connectivity from a generic BGA layout. Confirm voltage rails, decoupling, exposed thermal requirements, clock implementation, programming interfaces, and LCD routing against the official K30 documentation before release. This product record combines verified distributor specifications, package information, source links, and engineering guidance to support component selection and PCB planning. Because the supplied search results do not expose a complete manufacturer price matrix or a verified pin-by-pin map, missing values are explicitly identified rather than guessed.

Permintaan RFG Kontak
MK40DN512ZVLQ10-FR - Kinetis K40 100MHz Cortex-M4 MCU 512KB | NXP
MK40DN512ZVLQ10-FR

MK40DN512ZVLQ10-FR - Kinetis K40 100MHz Cortex-M4 MCU 512KB | NXP

The NXP MK40DN512ZVLQ10-FR is a Kinetis K40 sub-family 32-bit ARM Cortex-M4 microcontroller operating at up to 100 MHz, integrating 512 KB of program flash and 128 KB of SRAM on-chip. Housed in a 144-pin LQFP package (20 x 20 mm), the -FR suffix indicates the factory-tray packaging option. The device combines a high-performance core with Full-Speed USB 2.0 On-The-Go, Ethernet MAC, CAN, segment-LCD controller, and 16-bit ADC to address consumer, industrial, and medical embedded designs. What is a Kinetis microcontroller? A microcontroller is a single-chip computer that integrates a CPU core, program memory (flash), data memory (SRAM), and a rich set of peripherals (timers, communication controllers, analog blocks). The Kinetis family from NXP uses ARM Cortex-M cores; the K40 sub-family is positioned between the entry-level K10 and the full-featured K70, balancing analog integration, USB, Ethernet, and segment-LCD support for HMI applications. Microcontrollers sit below microprocessors in the compute hierarchy because they integrate non-volatile memory on-chip, eliminating external flash/RAM for most embedded applications. Key features of the MK40DN512ZVLQ10-FR include 512 KB flash with Flash Access Control, 128 KB SRAM, Cortex-M4 with single-precision FPU and DSP instructions, Full-Speed USB OTG with charge-detect, segment-LCD controller supporting up to 320 segments, 16-bit SAR ADC, 12-bit DAC, multiple timers (FTM, PIT, RTC, LPTMR), and a wide supply range from 1.71 V to 3.6 V supporting both 1.8 V and 3.3 V rails. Communications include Ethernet MAC, USB OTG, CAN, SPI, I2C, UART, and I2S. The MK40DN512ZVLQ10-FR uses the Cortex-M4 Harvard architecture with a 3-stage pipeline plus branch prediction, single-cycle MAC, and a hardware single-precision FPU. The 100 MHz operation delivers 1.25 DMIPS/MHz and 3.09 CoreMark/MHz, enabling DSP and floating-point workloads. The internal flash uses 16-bit access with 4 KB sector granularity, supporting byte-write, block-erase, and ECC-style integrity on higher-end Kinetis parts. The LCD controller supports both standard and enhanced waveform modes with charge redistribution. Typical applications include industrial segment-LCD human-machine interfaces (HMIs), USB medical dongles, point-of-sale terminals, smart energy metering with LCD, factory sensor hubs, and consumer appliances requiring segment-LCD display plus USB connectivity. Industrial temperature ranges of -40C to +105C support harsh embedded environments. When designing with this MCU, ensure the 144-LQFP (20 x 20 mm) PCB footprint and pad pattern are accommodated with adequate clearances for trace routing. The VLL/VLL1/VLL2 segment-LCD supply pins must be properly configured for charge-pump or external resistor bias. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes beyond the manufacturer datasheet.

Permintaan RFG Kontak
MK40DN512ZVMD10 - 100MHz Cortex-M4 Kinetis K40 MCU | NXP
MK40DN512ZVMD10

MK40DN512ZVMD10 - 100MHz Cortex-M4 Kinetis K40 MCU | NXP

The NXP Semiconductors MK40DN512ZVMD10 is a Kinetis K40 32-bit ARM Cortex-M4 microcontroller running at up to 100 MHz with 512 KB flash memory and 128 KB SRAM, housed in a 144-pin MAPBGA (13 x 13 mm) ball grid array package. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory (flash for program storage, SRAM for data), and peripherals on one chip, sitting at the top of the embedded electronics hierarchy within the broader families of microcontrollers and system-on-chip devices. The Kinetis K series is NXP's high-performance MCU line based on the ARM Cortex-M4 core, which adds DSP instructions and hardware floating-point capability for computationally demanding embedded applications. Key features of the MK40DN512ZVMD10 include a 100 MHz ARM Cortex-M4 core with DSP functionality, an integrated full-speed USB 2.0 OTG controller, a segment LCD controller, and a supply voltage range of 1.71 V to 3.6 V. The part operates from 1.8V, 2.5V, or 3.3V rails, and provides 52 I/O ports per the digchip parameter listing. The DN suffix denotes the split-gate flash variant of the K40 family with 512 KB flash and 128 KB SRAM. Technically, the K40 family provides advanced analog integration and serial communication peripherals, per the chipdig datasheet summary, targeting consumer, industrial, and medical applications. The Cortex-M4 core delivers up to 100 MHz performance with a single-cycle multiply-accumulate unit supporting digital signal processing workloads, while the USB OTG controller removes the need for an external USB PHY in device-to-device designs. Typical applications include human-machine interface (HMI) panels using the segment LCD controller, USB-connected industrial instruments, and medical monitoring devices where integrated analog and communications reduce bill-of-materials count. Designers should note lifecycle status: NXP lists the MK40DN512ZVMD10 as NRND (Not Recommended for New Designs), so new projects should evaluate successors such as the Kinetis K6x while legacy designs can continue to source this part from distributors. This page synthesizes distributor pricing, drop-in alternatives, pin-level detail, and practical design notes not found in the manufacturer datasheet, adding procurement and cross-reference value beyond the NXP product page.

Permintaan RFG Kontak
MK40DX128VLH7 - 72MHz ARM Cortex-M4 MCU | NXP | Kinetis K40
MK40DX128VLH7

MK40DX128VLH7 - 72MHz ARM Cortex-M4 MCU | NXP | Kinetis K40

The NXP Semiconductors MK40DX128VLH7 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K40 family running at 72 MHz with 128 KB of flash memory and 64 pins in an LQFP 10x10 mm surface-mount package, operating from 1.8 V, 2.5 V, or 3.3 V supplies. According to NXP product information, this K40 Segment LCD MCU is active and in production. A microcontroller (MCU) is a single integrated circuit that combines a processor core, memory, and programmable peripherals, forming the highest-volume class of embedded semiconductors. The Kinetis K40 family sits in the mid-performance tier of NXP's scalable Kinetis portfolio, above entry-level K series parts and below the high-performance K6x parts, offering USB and high-precision analog integration. Key features include the ARM Cortex-M4 core with DSP instructions at 72 MHz, 128 KB (128K x 8) on-chip flash, a segment LCD controller that differentiates K40 from K20 and K10 parts, USB connectivity, flexible low-power modes, and integrated high-precision analog peripherals. The temperature grade is industrial, and terminal form is gull-wing per distributor data. Technically, the Cortex-M4 pipeline executes single-cycle MAC operations, enabling efficient digital filtering and control loops. The flexiblepower architecture supports multiple run, wait, stop, and very-low-power modes, letting designers trade wake-up latency against standby current in battery-operated products. Typical applications include industrial HMI panels with segmented LCD displays, consumer appliances, metering products, and battery-powered instruments that need USB plus low-power standby. Design consideration: verify flash retention and supply-rail selection (1.8 V / 2.5 V / 3.3 V) against the NXP datasheet before finalizing the power tree, and confirm current lifecycle data since the estimated EOL date listed by third-party sources is 2029. This page synthesizes distributor pricing, cross-reference data, and drop-in alternative analysis not found in the manufacturer datasheet.

Permintaan RFG Kontak
MK40DX128VMC7 - Kinetis K40 Cortex-M4 MCU 128KB Flash | NXP
MK40DX128VMC7

MK40DX128VMC7 - Kinetis K40 Cortex-M4 MCU 128KB Flash | NXP

The NXP MK40DX128VMC7 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K40 sub-family, featuring 128KB of program Flash, 32KB SRAM, and integrated Full-Speed USB in a 121-pin MAPBGA (8x8 mm) package. Operating at up to 72 MHz, this MCU delivers deterministic performance for industrial and embedded applications including segment-LCD human-machine interfaces. A microcontroller (MCU) is a single-chip computer that integrates a processor core, program and data memory, plus peripheral interfaces. The Cortex-M4 architecture extends Cortex-M3 with single-precision floating-point and DSP instructions, sitting between small Cortex-M0 microcontrollers and higher-end Cortex-M7 parts. Kinetis K40 specifically targets applications that need segment-LCD driving plus USB, integrating the bus controller, segment drivers, charge pump, and PWM-driven backlight control on-die, which removes external LCD controller ICs and shrinks BOM cost. Key features include ARM Cortex-M4 core with single-precision FPU and DSP extensions, 128KB Flash / 32KB SRAM memory, Full-Speed USB 2.0 On-The-Go controller, and a segment-LCD controller supporting up to 40 segments x 8 backplanes. The device includes a 16-bit SAR ADC, 12-bit DAC, multiple timer/PWM modules, and serial interfaces including CAN, I2C, IrDA, SPI, UART, and USB. Operational range spans 1.71V to 3.6V with industrial temperature grade -40C to +105C. Architecturally, the MK40DX128VMC7 leverages a low-leakage process with separate voltage rails for the core and I/O, allowing the analog and segment-LCD blocks to remain active while the CPU sleeps. The 72 MHz CPU frequency is paired with multi-layer bus matrix and direct memory access for deterministic peripheral throughput, and the integrated USB controller delivers Full-Speed host/device/OTG functionality without an external PHY. Typical applications include industrial segment-LCD HMI panels, USB-equipped metering devices, point-of-sale terminals, medical instruments requiring display readouts, and consumer appliances with built-in USB diagnostics. Designers commonly pair the device with NXP segment-LCD glass, external SPI Flash for data logging, and full-speed USB PHY connections. When designing with this MCU, ensure the 121-ball MAPBGA layout includes proper power-plane decoupling and ground stitching under the BGA, and verify segment-LCD bias generation resistor selection against the LCD glass specifications. This page synthesizes distributor pricing, drop-in alternatives, package-level comparison data, and practical design guidance that goes beyond what the manufacturer datasheet and distributor product pages typically present, giving you a single reference for sourcing and BOM decisions.

Permintaan RFG Kontak
MK40DX256VLL7 - 256KB Flash 72MHz Cortex-M4 MCU | NXP
MK40DX256VLL7

MK40DX256VLL7 - 256KB Flash 72MHz Cortex-M4 MCU | NXP

The NXP MK40DX256VLL7 is an ARM Cortex-M4 Kinetis K40 microcontroller IC running at 72 MHz with 256KB (256K x 8) of Flash memory, 100-pin LQFP (14x14 mm) package, and integrated Full-Speed USB plus Segment LCD controller. The MK40DX256VLL7 is positioned as the mid-performance entry point of the Kinetis K family, sharing peripheral IP with higher-density K60/K70 parts. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (SRAM), and a rich set of peripherals (USB, timers, ADC, segment LCD, GPIOs). The Cortex-M4 core adds single-precision FPU and DSP extensions, sitting in the hierarchy ARM Cortex-M -> 32-bit microcontroller -> embedded processor -> semiconductor. The K40 sub-family specifically targets human-machine interface (HMI) applications thanks to its integrated segment LCD driver. Key features of the MK40DX256VLL7 include 256KB of on-chip Flash, 64KB of SRAM (per the Kinetis K40 sub-family datasheet), Full-Speed USB 2.0 with on-chip transceiver, Segment LCD controller supporting up to several dozen segments, multiple low-power modes (Wait, Stop, VLPR), 16-bit SAR ADC, 12-bit DAC, and a wide supply voltage range of 1.71V to 3.6V. The 100-LQFP footprint is a mainstream, easy-to-proto surface-mount package with 0.5 mm pitch. On the architecture front, the K40 uses the Cortex-M4 with FPU, a 72 MHz bus matrix, and a flexible DMA engine (eDMA) that offloads memory-to-peripheral transfers. The integrated Segment LCD controller with charge pump and software-configurable contrast eliminates an external LCD driver, reducing BOM cost and PCB area for meter, appliance, and industrial-control designs. Typical applications include low-power segment-LCD metering, USB-capable industrial sensor nodes, home appliance HMIs, point-of-sale terminals, secure element accessories, and battery-powered IoT endpoints. Its combination of integrated USB and segment LCD is unusual and unique to the K40 family. When designing with this part, note that the LQFP-100 footprint is large (14x14 mm) compared to modern BGA Cortex-M parts; for new high-density designs consider Kinetis KE or LPC alternatives, but for legacy or HMI/LCD applications the MK40DX256VLL7 remains a strong fit. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MK40DX256VMC7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP
MK40DX256VMC7

MK40DX256VMC7 - 72MHz Cortex-M4 MCU, 256KB Flash | NXP

The NXP MK40DX256VMC7 is a 72 MHz ARM Cortex-M4 microcontroller from the Kinetis K40 family, featuring 256 KB of program flash and 64 KB of SRAM in a 121-pin MAP-BGA (8x8 mm) package. The K40 sub-family integrates Full-Speed USB, segment LCD controller, high-precision analog peripherals, and flexible low-power modes for human-machine interface (HMI) and metering applications. A microcontroller (MCU) is an integrated circuit containing a processor core, program memory (Flash), working memory (RAM), and programmable peripherals. The ARM Cortex-M4 core family is widely adopted for embedded designs because it combines deterministic interrupt behaviour, Thumb-2 instruction efficiency, and DSP instructions for signal processing. The K40 belongs to NXP's Kinetis portfolio positioned for mid-performance scalable designs sharing a common toolchain, peripheral library, and pinout philosophy. Key features of the MK40DX256VMC7 include a Cortex-M4 core with single-precision FPU, hardware cryptographic acceleration (CAU), 16-bit ADC, comparators, DAC, programmable delay block, multiple serial interfaces (UART, SPI, I2C), segment LCD driver, and Full-Speed USB On-The-Go. The K40 family supports FlexMemory with EEPROM emulation in flash, allowing configurable endurance vs. density trade-offs. The integrated segment LCD controller enables direct drive of up to several hundred LCD segments without external drivers. The MK40DX256VMC7 operates from 1.71 V to 3.6 V with multiple low-power modes (Wait, Stop, VLPR, VLLS). It includes a flexible 8-channel DMA, 16-bit SAR ADC with hardware averaging, programmable gain amplifiers, and temperature sensor. The 121-MAPBGA package (8x8 mm) provides a compact footprint for space-constrained designs while exposing the full peripheral complement. Typical applications include industrial HMI panels with LCD, medical patient monitors, USB peripherals, e-metering/energy harvesting devices, and portable consumer products. The segment LCD and USB combination is particularly suited for small appliances with display and connectivity. The hardware crypto accelerator (CAU) supports DES, AES, and SHA algorithms for secure communication. Designers should evaluate active mode power consumption versus low-power leakage and confirm the BGA ballout allows routing of the segment LCD bus and USB differential pair. Decoupling and PCB stack-up for the MAP-BGA require careful impedance control for USB and careful via-in-pad or dog-bone fan-out for reliable assembly. This page synthesises distributor stock, lifecycle status, drop-in same-family alternatives, and design considerations for engineers evaluating the K40 series, beyond what a single datasheet page offers.

Permintaan RFG Kontak
MK40DX256ZVMB10 - 100MHz 256KB ARM Cortex-M4 MCU | NXP
MK40DX256ZVMB10

MK40DX256ZVMB10 - 100MHz 256KB ARM Cortex-M4 MCU | NXP

The NXP Semiconductors MK40DX256ZVMB10 is a 32-bit ARM Cortex-M4 Kinetis K40 microcontroller operating at 100 MHz with 256 KB of flash memory in an 81-MAPBGA package measuring 10 x 10 mm. The verified distributor listings identify the device as a single-core Kinetis K40 MCU with 256K x 8 flash storage and 1.8 V, 2.5 V, or 3.3 V supply options. A microcontroller is a programmable semiconductor system containing a processor core, memory, peripherals, and interfaces. The ARM Cortex-M4 core belongs to the embedded processor hierarchy and is intended for control-oriented applications, while the Kinetis K40 family combines that core with integrated flash, SRAM, communications interfaces, timers, and analog peripherals. This part is therefore a complete embedded-processing platform rather than a simple logic device. The verified information confirms a 100 MHz operating frequency, 32-bit architecture, 256 KB flash memory, and an 81-MAPBGA package. The Kinetis designation and Cortex-M4 architecture are useful for software-tool selection, peripheral planning, and firmware development. The package data also indicates a compact 10 x 10 mm land pattern suitable for space-constrained embedded equipment. The part is identified by distributor sources as an ARM Cortex-M4 Kinetis K40 microcontroller, which supports industrial control, embedded automation, communications equipment, and general-purpose electronic systems. Actual peripheral assignments, GPIO availability, SRAM capacity, operating-temperature limits, and detailed electrical limits were not supplied in the verified data and must be confirmed from the manufacturer documentation before design release. A key design consideration is the 81-MAPBGA package. BGA assembly requires appropriate PCB land patterns, inspection, and manufacturing capability; a footprint-compatible replacement must match the exact package and pinout rather than only the processor family. Because the provided web results do not identify a verified drop-in substitute, replacement selection should be based on the NXP datasheet and a manufacturer-approved cross-reference. This page combines verified distributor specifications, package information, sourcing links, and engineering guidance for the MK40DX256ZVMB10. It is intended to help engineers identify the correct MCU, plan sourcing, and locate the datasheet while avoiding unsupported assumptions about otherwise unspecified electrical or lifecycle details.

Permintaan RFG Kontak
MK40DX64VLH7 - 72MHz Cortex-M4 MCU 64KB Flash | NXP
MK40DX64VLH7

MK40DX64VLH7 - 72MHz Cortex-M4 MCU 64KB Flash | NXP

The NXP MK40DX64VLH7 is a 32-bit Kinetis K40 microcontroller based on the Arm Cortex-M4 core running at up to 72 MHz, with 64 KB of flash memory, integrated segment LCD controller, and a 64-pin LQFP (10x10 mm) surface-mount package. It operates from a 1.71V to 3.6V supply (1.8V/2.5V/3.3V nominal rails) and is rated for industrial ambient temperatures up to 105 C. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, memory, and peripherals into one chip, forming the lowest layer of the embedded-system hierarchy beneath system-on-chip devices and application processors. The Kinetis K40 family sits in the mid-performance tier of the Kinetis portfolio, adding a segment LCD driver and high-precision analog integration to the scalable Kinetis platform originally developed by Freescale Semiconductor, now part of NXP Semiconductors. Key features include the Cortex-M4 core with DSP and single-cycle multiply instructions, 64 KB of on-chip flash program memory, up to 32 MHz crystal oscillator support plus a 32 kHz oscillator for RTC and low-power modes, and a flexible low-power architecture with multiple run, wait, stop, and very-low-power modes. The integrated LCD controller can drive segmented glass directly, eliminating an external LCD driver and reducing BOM cost in metering and human-interface designs. The device integrates high-precision analog peripherals including 12-bit and 16-bit ADC channels, along with USB connectivity, timers, UART, SPI, and I2C serial interfaces. The 100-pin-capable Kinetis peripheral set is muxed onto the 64-pin LQFP footprint, balancing I/O count against board area. Flash programming operates over the full voltage range, and the memory is scalable upward within the same footprint across the K40 family, providing a firmware-compatible upgrade path to 128 KB and 256 KB variants in the identical 64-LQFP package. Typical applications include utility metering with segment LCD displays, handheld battery-powered instruments, industrial control panels, consumer appliances with LCD human-machine interfaces, and low-power sensor nodes. The 72 MHz core with hardware DSP support makes it well suited for digital filtering and metering computation, while the low-power modes suit coin-cell and battery-operated portable products. Design consideration: budget the ADC reference and LCD drive voltages early; the segment LCD controller requires appropriate bias resistor configuration, and analog performance depends on clean VDDA/VREF routing on the 64-LQFP footprint. This page synthesizes distributor pricing, drop-in same-family alternatives, application guidance, and design notes not found in the manufacturer datasheet, verified as of 2026-10-18.

Permintaan RFG Kontak
MK40DX64VLK7 - Kinetis K40 72MHz Cortex-M4 MCU 64KB Flash | NXP
MK40DX64VLK7

MK40DX64VLK7 - Kinetis K40 72MHz Cortex-M4 MCU 64KB Flash | NXP

The NXP MK40DX64VLK7 is a Kinetis K40 32-bit microcontroller built on the ARM Cortex-M4 core running at 72 MHz, integrating 64 KB of program flash and packaged in an 80-lead LQFP (12x12 mm). The K40 sub-family targets applications that need segment-LCD drive, Full-Speed USB, and high-precision analog in a single chip, while remaining pin-compatible with the broader Kinetis K-series portfolio. What is a Kinetis K40 microcontroller? A Kinetis K40 MCU is a low-power ARM Cortex-M4 microcontroller in the Kinetis family that adds segment-LCD controllers and Full-Speed USB On-The-Go to the standard Cortex-M4 feature set. It sits in the broader taxonomy of ARM Cortex-M microcontrollers -> 32-bit MCUs -> microcontrollers -> integrated circuits. The K40 was designed as a scalable entry point into NXP's mid-performance Kinetis portfolio, sharing the same enablement tools, peripheral set, and pinout philosophy as K10/K20/K30/K60/K70 parts. Key features include 64 KB flash, 16 KB SRAM, a segment-LCD controller with up to 8x40 segments, Full-Speed USB OTG with on-chip transceiver, a 16-bit SAR ADC with up to 1 MSPS, two 12-bit DACs, multiple timers (FTM, PIT, LPTMR), and a flexible low-power mode set including VLLS0/1 standby current down to sub-microampere levels. The integrated FlexBus external bus interface and SDHC host controller extend the device's reach into graphics and removable-storage applications. Architecturally, the MK40DX64VLK7 uses a Harvard bus implementation with single-cycle MAC, hardware divide, and tightly-coupled memory paths that give deterministic Cortex-M4 DSP performance at 72 MHz (1.25 DMIPS/MHz, 1.42 CoreMark/MHz). The analog chain (16-bit ADC, 12-bit DAC, 6-bit DAC, comparators, voltage reference) shares a common high-precision voltage reference, allowing the MCU to replace external analog components in metering and instrumentation designs. Typical applications include electricity/heat/gas/water metering with LCD readout, portable medical devices, USB HID peripherals, e-bike controllers, small-format industrial HMIs with segment LCD, and battery-powered sensor hubs that benefit from the low-power VLLS modes. When designing with the MK40DX64VLK7, allocate the 80-LQFP land pattern carefully: the segment-LCD pins are bonded out on dedicated segments, so the LCD glass connection topology cannot easily be moved to other Kinetis parts without verifying pinout compatibility. Provide at least 4.7 uF bulk + 100 nF decoupling on each VDD/VSS pair. This page synthesizes distributor pricing, drop-in Kinetis-family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak