Produk (42.000+)

PCM1748E - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1748E

PCM1748E - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1748E is a CMOS, monolithic, two-channel digital-to-analog converter IC with support circuitry for stereo digital audio applications. The device uses a 24-bit enhanced multilevel delta-sigma DAC architecture with fourth-order noise shaping and 8-level amplitude quantization, providing a compact solution for digital-to-analog conversion in consumer, communications, and embedded audio systems. It is supplied in a 16-pin SSOP package according to the verified Texas Instruments product information. A stereo audio DAC is a specialized data-conversion component that accepts digital audio samples and produces corresponding analog left and right channel signals. In the broader semiconductor hierarchy, the PCM1748E belongs to the audio DAC class, within ADC/DAC and interface IC families. The enhanced multilevel delta-sigma architecture is intended to improve dynamic performance and clock tolerance compared with earlier converter implementations while keeping the external signal path manageable. The verified product information identifies the PCM1748 family as a 24-bit audio DAC with I2S support and a 16-SSOP package. Distributor listings also identify the PCM1748E as a stereo audio DAC and describe the device as a 24-bit converter operating with digital audio input. The available snippets mention sampling-rate values that are not fully consistent across sources, including 96 kHz, 100 kHz, and 192 kHz; therefore, the exact supported sampling-rate range should be confirmed against the manufacturer datasheet before design release. Typical signal-chain use places the PCM1748E after an audio source such as a digital interface, USB audio controller, or embedded audio processor. The digital stream is converted into left and right analog outputs for headphone, line-level, mixer, or amplifier circuitry. Because the converter is designed for stereo audio, it is useful in compact playback systems where two-channel conversion, small package size, and straightforward digital control are more important than a high channel count. Designers should verify the SSOP-16 land pattern, digital interface format, system clocking, analog output implementation, and decoupling requirements against the current Texas Instruments datasheet. Layout should keep digital clock and data routing away from analog output nodes, while supply and ground connections should follow the manufacturer’s recommended application circuit. The 16-pin SSOP package also requires careful solderability and assembly planning when lead pitch and thermal exposure are significant design constraints. This page consolidates verified manufacturer and distributor information, identifies the PCM1748E’s converter and packaging characteristics, and provides application-oriented guidance for engineers evaluating it as a stereo audio DAC. It also distinguishes documented part variants from packaging-only references and avoids treating unverified electrical limits as guaranteed specifications.

Permintaan RFG Kontak
PCM1748E/2K - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1748E/2K

PCM1748E/2K - 24-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1748E/2K is a 24-bit, 96 kHz sampling stereo audio digital-to-analog converter with a 100 dB typical dynamic range, housed in a 16-pin SSOP package. The PCM1748E/2K provides two voltage-output audio channels and supports 4.5 V to 5 V analog operation. It uses enhanced multilevel delta-sigma conversion with fourth-order noise shaping and 8-level amplitude quantization to deliver strong dynamic performance and improved clock-jitter tolerance. An audio DAC is a semiconductor that converts digital PCM audio data into analog voltage signals suitable for headphone, line, amplifier, mixer, or recording-system input stages. Within the signal-chain hierarchy, the PCM1748E/2K is an audio DAC, which is a type of digital-to-analog converter and data-conversion IC. Its stereo architecture supports simultaneous left- and right-channel playback while reducing the number of separate converter packages required on a compact audio board. The principal features include 24-bit conversion resolution, a 96 kHz sampling rate, 100 dB typical dynamic range for the PCM1748E grade, enhanced multilevel delta-sigma architecture, fourth-order noise shaping, and 8-level amplitude quantization. Its 3-wire serial digital interface accepts digital audio data and clock signals, while the analog outputs provide a straightforward path to downstream amplification. The converter is designed for consumer and professional audio equipment where compactness, dynamic range, and clock-jitter performance are important. The internal fourth-order noise-shaping architecture moves quantization noise away from the most audible low-frequency region, while multilevel quantization reduces demands on the digital-to-analog conversion filters. This architecture supports accurate reproduction of music and speech signals at relatively low analog output amplitude. Clock jitter tolerance is improved compared with simpler delta-sigma converters, although system-level performance still depends on clean supplies, stable clocking, correct digital timing, and properly implemented output filtering. Typical uses include powered speakers, compact USB audio interfaces, headphone amplifier boards, digital mixing consoles, multimedia equipment, and home-audio playback modules. PCM1748E/2K is particularly suitable where two analog output channels are required but a six-channel or more complex multichannel DAC would add unnecessary cost and board area. A companion codec or digital interface must supply valid PCM data, while the DAC converts that data into left and right analog outputs. For layout, place the analog output components and their return paths close to the device, maintain a quiet analog ground reference, and separate digital clock and data routing from sensitive output nodes. Use stable low-noise supply decoupling and follow the pin-description table in the manufacturer datasheet when assigning PCB tracks. PCB footprint and pin assignment should be checked against the exact SSOP-16 ordering suffix before release. This product data combines the manufacturer architecture description with a side-by-side family comparison, practical layout guidance, and drop-in replacement analysis. It is intended to help engineers identify the correct Texas Instruments orderable variant, assess its conversion performance, and integrate it into a repeatable audio-system design.

Permintaan RFG Kontak
PCM1748KE - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1748KE

PCM1748KE - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1748KE is a 24-bit stereo digital-to-analog converter with a 96 kS/s sampling rate, 106 dB SNR, and an SSOP-16 (DBQ) package. It converts two digital audio channels into balanced or single-ended analog outputs and supports 4.5 V to 5.5 V operation. An audio DAC is an interface IC that reconstructs analog voltage signals from digital audio data. Its position in the signal chain is between a digital audio source, such as a transmitter, decoder, or audio processor, and an analog amplifier, mixer, headphone driver, or line output stage. The PCM1748KE belongs to the broader DAC, ADC/DAC, and integrated-circuit hierarchy while specializing in high-resolution stereo audio playback. Key features include two 24-bit DAC channels, enhanced multilevel delta-sigma conversion, fourth-order noise shaping, and 8-level amplitude quantization. These features support the stated 106 dB signal-to-noise ratio and improve tolerance to clock jitter. The converter operates from 4.5 V to 5.5 V and is specified across a -25°C to +85°C temperature range. Internally, the PCM1748 uses an enhanced multilevel delta-sigma architecture designed for excellent dynamic performance. Fourth-order noise shaping moves quantization noise away from the most sensitive part of the audio band, while 8-level amplitude quantization reduces demands on the internal conversion system. Digital audio data is accepted through a serial interface identified in the product listing as I2S-compatible. Typical applications include digital-audio decoding, multichannel audio equipment, powered speakers, soundbars, compact home-audio systems, and industrial monitoring equipment. It is particularly useful when two analog outputs are required and a 24-bit conversion system is preferred over lower-resolution converters. Its 16-pin surface-mount package also supports compact audio boards. Designers should treat the PCM1748KE as a digital-to-analog output stage rather than a complete line amplifier. The analog outputs still require appropriate filtering, grounding, and signal-path design for the intended load. Use the manufacturer pin-description table when assigning PCB tracks, and verify interface timing and output-mode requirements against the manufacturer datasheet before releasing the layout. This page organizes the PCM1748KE technical details, package information, drop-in alternatives, application guidance, and design considerations into an engineering-focused selection reference. It also identifies where direct substitution requires careful comparison of interface, package, and operating requirements.

Permintaan RFG Kontak
PCM1750U - Dual 18-Bit Audio ADC | Texas Instruments | SOIC-28
PCM1750U

PCM1750U - Dual 18-Bit Audio ADC | Texas Instruments | SOIC-28

The Texas Instruments PCM1750U is a dual-channel, 18-bit monolithic audio analog-to-digital converter using successive-approximation conversion and a serial interface, housed in a 28-pin SOIC package. The converter is designed for applications requiring simultaneous digital capture of two audio channels while retaining an 18-bit resolution and a compact surface-mount footprint. An audio ADC is a data-converter IC that converts left- and right-channel analog audio signals into digital sample data for transmission, storage, processing, or playback. The PCM1750U belongs to the broader ADC/DAC category, with its application-specific role defined by audio signal acquisition. It is a dual CMOS device, allowing two analog audio inputs to be represented within one package rather than requiring two separate converter packages. The principal verified characteristics are 18-bit resolution, a dual-channel architecture, successive-approximation conversion, and a serial output format. These features make the PCM1750U suitable for digital audio recording, stereo capture, multimedia equipment, and other systems that require two synchronized audio conversion channels. The distributor classification identifies the device as an audio ADC in a 28-pin SOIC package. Successive-approximation conversion implements a binary-search sequence that progressively resolves the sampled input voltage. This architecture is appropriate for audio systems requiring deterministic serial data transfer and practical converter performance. Because no complete manufacturer datasheet was included in the verified dataset, the clock frequency, conversion rate, dynamic range, full-scale range, channel isolation, and analog input impedance are not independently stated here and must be confirmed in the manufacturer datasheet. Typical implementation places the PCM1750U after stereo input conditioning, with anti-alias filtering or other analog front-end stages ahead of its analog inputs. The serial interface then connects to a digital audio processor, audio codec, microcontroller, or logic device capable of receiving the converter's data, clock, and control signals. PCB layout should keep analog and digital return paths separated, minimize digital clock coupling into the analog inputs, and provide stable bypassing near the device. The principal design trade-off is that the PCM1750U integrates only the conversion function shown in the verified information; system-level audio performance also depends on the input amplifier, anti-alias filter, reference implementation, clock source, grounding, and software configuration. Before finalizing a design, verify timing, power-supply requirements, analog input range, and pin functions against the current Texas Instruments datasheet. This page consolidates verified distributor information, source traceability, replacement guidance, and engineering-focused selection notes. It also distinguishes confirmed PCM1750U characteristics from parameters that still require datasheet verification, providing a practical basis for sourcing and early design assessment without inventing unavailable electrical details.

Permintaan RFG Kontak
PCM1750U/1K - 18-Bit Stereo Audio ADC | Texas Instruments
PCM1750U/1K

PCM1750U/1K - 18-Bit Stereo Audio ADC | Texas Instruments

Texas Instruments PCM1750U/1K is an 18-bit, dual-channel, successive-approximation audio ADC with a serial interface, packaged in a 28-pin SOIC. It operates from dual ±4.75 V to ±5.25 V supplies, covers an industrial temperature range of -40°C to +85°C, and provides separate conversion channels for stereo audio acquisition. The PCM1750U/1K is supplied in tape-and-reel packaging. An audio ADC is a specialized data-converter IC that transforms continuous analog audio signals into digital words for storage, transmission, processing, or playback. A dual ADC supports two audio channels, while a serial interface reduces the number of signal connections required between the converter and a digital audio processor. The PCM1750U/1K belongs to the ADC, data-converter IC, and audio-signal-conversion hierarchy used in professional and consumer audio equipment. The principal device attributes are 18-bit resolution, two ADC channels, a serial output, and a 28-pin SOIC package. The dual-supply operating range permits bipolar analog input signals centered on ground. Its successive-approximation architecture is suitable for audio systems that prioritize a straightforward serial output format and straightforward connection to a digital audio interface. The industrial temperature qualification supports operation across -40°C to +85°C. The converter's 28-pin gull-wing package is intended for surface mounting on printed circuit boards. Applications must account for analog and digital return-current separation, clean reference and supply connections, adequate input filtering, and controlled clocking of the serial interface. Because the device uses two analog channels, symmetric routing and grounding are important for maintaining comparable signal quality across the stereo pair. The manufacturer datasheet should be used when assigning every pin and selecting the associated input, reference, power, and interface components. Typical uses include stereo audio capture for broadcast and studio equipment, digital mixers, multichannel recording systems, audio interface modules, and embedded media appliances. The serial architecture is particularly useful where an audio processor provides a compatible clock and data interface and the design benefits from a compact two-channel conversion solution. External filtering, gain control, and conversion-clock synchronization remain important parts of the complete signal chain. For a new layout, place the analog input and reference connections away from digital clock and serial-data traces, and decouple each supply rail close to its package pins. Confirm the input-voltage range, settling requirements, clock timing, and master-mode configuration against the manufacturer datasheet before finalizing component values or clock-routing topology. This page consolidates the converter's principal electrical characteristics, packaging information, drop-in references, comparison criteria, and practical PCB guidance into an engineering-focused selection record. It is intended to support faster design review without replacing the complete manufacturer datasheet.

Permintaan RFG Kontak
PCM1750UG4 - Dual 18-Bit Audio ADC | Texas Instruments
PCM1750UG4

PCM1750UG4 - Dual 18-Bit Audio ADC | Texas Instruments

Texas Instruments PCM1750UG4 is a dual-channel, 18-bit monolithic CMOS audio analog-to-digital converter designed for dynamic signal applications. It uses a serial interface, operates from a 4.75 V to 5.25 V supply, and is packaged in a 28-pin SOIC with a 7.50 mm body width. The converter features true co-phased inputs, an internal sample-and-hold function for each channel, and an internal reference. An audio ADC is a data-acquisition IC that converts continuously varying analog audio voltages into digital words for processing, storage, transmission, or playback. The PCM1750UG4 belongs to the broader signal-conversion hierarchy: analog-to-digital converter, data-conversion IC, interface IC, and semiconductor. Its dual-channel architecture supports simultaneous conversion of left and right audio signals while its serial output reduces the number of interconnects required between the converter and a digital audio processor. The principal features include 18-bit resolution, two true co-phased analog input channels, internal sample-and-hold circuits, an internal reference, and a serial digital interface. The true co-phased input arrangement is especially useful in stereo systems because both channels are intended to be sampled in phase, helping preserve timing relationships within the digital audio stream. Its internal reference reduces the external component count required for basic converter operation. The PCM1750UG4 combines a dual CMOS analog front end with an 18-bit conversion section and digital interface in one monolithic device. Serial data transfer supports integration with audio codecs, digital signal processors, microcontrollers, and other digital-audio systems. According to the manufacturer datasheet, total power dissipation is less than 300 mW maximum when using negative 5 V supplies. Other electrical characteristics, including conversion rate, dynamic range, total harmonic distortion, input impedance, and clock requirements, should be confirmed in the relevant datasheet tables before final design sign-off. Typical uses include stereo audio capture, professional and consumer audio equipment, digital mixers, audio recording systems, multimedia terminals, and communication equipment with analog audio inputs. The 28-pin SOIC package is suitable for conventional surface-mount PCB assembly. Systems requiring a smaller footprint should evaluate a different package rather than assuming mechanical compatibility. When designing around the PCM1750UG4, follow the datasheet-supported input, reference, clock, and decoupling arrangements. Preserve analog and digital return-current separation, provide stable local supply bypassing, and route the serial interface away from high-current switching nodes. Confirm the complete pin assignment and exposed thermal or configuration requirements from the manufacturer pin-description table before assigning PCB tracks. This product record combines the PCM1750UG4's key converter characteristics with packaging guidance, replacement considerations, and practical integration advice. It also highlights the importance of checking interface timing and analog signal conditioning rather than relying only on the headline 18-bit resolution when evaluating an audio conversion design.

Permintaan RFG Kontak
PCM1760P - 20-Bit Dual-Input ADC | Texas Instruments
PCM1760P

PCM1760P - 20-Bit Dual-Input ADC | Texas Instruments

The Texas Instruments PCM1760P is a 20-bit, dual-input sigma-delta analog-to-digital converter with a 48 kHz sampling rate, housed in a 28-pin through-hole PDIP package. It combines a multi-bit enhanced-noise-shaping modulation stage with a decimating digital-filter function for high-resolution audio digitization. The manufacturer datasheet specifies typical total harmonic distortion plus noise of -92 dB and a maximum value of -90 dB, providing a concrete dynamic-performance benchmark for audio signal-chain design. An ADC converts continuous analog voltage signals into numerical data for processing, storage, or transmission. The PCM1760P belongs to the sigma-delta ADC family, whose architecture uses continuous-time modulation and digital filtering to shape quantization noise away from the signal band. In the broader component hierarchy, it is an ADC within the ADC/DAC category, which forms part of mixed-signal and data-conversion semiconductor systems used in professional audio, communications, instrumentation, and consumer equipment. The principal device features include two analog input channels, 20-bit conversion resolution, and operation at up to 48 kHz. Its multi-bit enhanced-noise-shaping architecture is intended to improve in-band conversion performance, while the associated decimating digital-filter section supports practical audio-rate output. The dual-channel arrangement allows simultaneous or multiplexed capture of stereo audio without requiring two separate converter packages. A 28-pin PDIP package also supports conventional through-hole PCB assembly and prototype rework. PCM1760P combines a multi-bit monolithic modulator with a monolithic decimation digital filter. In operation, each analog input is sampled and converted by the modulator before the digital filter removes high-frequency quantization noise and reduces the conversion rate. This division between analog modulation and digital filtering is central to the performance of the device. The resulting 20-bit, 48 kHz conversion capability is suited to systems that require greater nominal resolution than conventional low-cost audio converters while retaining a straightforward external interface architecture. Typical uses include stereo audio capture, professional recording equipment, broadcast monitoring, consumer audio equipment, and instrumentation requiring two-channel sampling. In each case, the ADC converts the left and right analog channels into digital samples while the internal decimation process controls out-of-band noise. System designers should also consider clock quality, analog input conditioning, grounding, decoupling, and digital-interface timing because these external factors can materially affect the converter's measured performance. For PCB implementation, place bypass capacitors close to the device supply pins and route analog and digital returns carefully to minimize shared-impedance coupling. The through-hole package simplifies inspection and manual rework, but it occupies considerably more board area than most surface-mount audio converters. Confirm clock requirements and interface signal levels against the manufacturer pin description and application guidance before finalizing the schematic. This product page combines the manufacturer-level architecture information, exact package and conversion specifications, application guidance, and drop-in-replacement evaluation for PCM1760P sourcing and engineering review. It is intended to help buyers identify the correct 28-pin audio ADC while providing practical context for signal-chain design and board implementation.

Permintaan RFG Kontak
PCM1760U - 20-Bit Dual Audio ADC | Texas Instruments
PCM1760U

PCM1760U - 20-Bit Dual Audio ADC | Texas Instruments

Texas Instruments PCM1760U is a 20-bit, dual-channel, multibit enhanced noise-shaping analog-to-digital converter system for professional audio acquisition. It converts two analog inputs at up to 48 kHz and is supplied in a 28-pin SOIC package. The converter combines a dual 20-bit monolithic modulator with a monolithic decimation digital filter, providing a compact signal-chain solution for high-precision audio systems. An audio ADC is a data-acquisition IC that samples incoming analog waveforms and converts their voltage amplitudes into high-resolution digital codes. The PCM1760U belongs to the broader ADC category, the ADC/DAC interface hierarchy, and ultimately the semiconductor and signal-conversion market. It is especially relevant when a design needs simultaneous conversion of two analog audio channels with high dynamic performance and manageable digital-filter implementation. Key characteristics include 20-bit resolution, two analog inputs, sigma-delta conversion, and a maximum sampling rate of 48 kHz. The manufacturer describes typical THD+N of -92 dB and a maximum THD+N of -90 dB. Its enhanced noise-shaping architecture reduces quantization noise within the audio band, while the integrated decimation filter prepares the converted stream for downstream digital processing. The PCM1760U integrates both the analog-to-digital modulator and the decimation filtering stage rather than requiring a separate external decimation filter for a conventional implementation. That integration can reduce board complexity and simplify clocking, data routing, and software configuration. The converter architecture remains specifically optimized for audio-rate signals, making it different from general-purpose high-speed ADCs intended for communications, instrumentation, or industrial waveform capture. Typical applications include professional digital audio equipment, multichannel recording interfaces, studio monitor controllers, digital mixing consoles, broadcast consoles, and consumer audio products requiring two-channel conversion. It is also suitable for USB or networked audio subsystems when the downstream interface accepts the PCM1760U's audio-rate serial data and clocking arrangement. Design the clock and digital interface carefully because converter performance depends on clean references, appropriate analog input conditioning, and a stable master clock. Use the manufacturer datasheet's recommended input and output-capacitor configuration, keep analog traces short, and provide return paths that avoid digital switching currents. Confirm interface voltage levels and data-format requirements against the exact system clock architecture. This product summary combines the converter's stated resolution, channel count, sampling rate, distortion performance, packaging, architecture, and application guidance with practical design notes. It also distinguishes the U package from package or ordering variants and provides verified drop-in alternatives with explicit engineering differences.

Permintaan RFG Kontak
PCM1770PW - 24-Bit Stereo DAC with HP Amplifier | TI
PCM1770PW

PCM1770PW - 24-Bit Stereo DAC with HP Amplifier | TI

Texas Instruments PCM1770PW is a low-voltage, low-power 24-bit stereo digital-to-analog converter with an integrated headphone amplifier, operating from a 1.6 V to 3.6 V supply in a 16-pin TSSOP package. It supports 50 kSPS conversion, I2S audio data, and a signal-to-noise ratio of 98 dB according to the Texas Instruments product page. A digital-to-analog converter, or DAC, converts digital audio samples into proportional analog voltages. In a stereo implementation, two converters reconstruct left and right channels from an I2S source. The PCM1770PW combines that conversion function with headphone-driver circuitry and support logic, reducing the number of discrete components required in portable audio equipment while retaining a compact surface-mount footprint. The converter uses TI’s enhanced multilevel architecture, which applies noise shaping and multilevel amplitude quantization. These techniques support efficient low-voltage operation and improved dynamic performance. The integrated headphone amplifier includes software control, allowing the host processor to adjust the relevant operating mode without relying on a separate analog control interface. PCM1770PW is identified as a 24-bit DAC rated for 50 kSPS operation. Its CMOS monolithic construction supports low-power audio signal chains, while the 1.6 V to 3.6 V operating range fits battery-powered and portable systems. The device accepts 3-wire I2S serial audio data, making it suitable for systems whose digital audio source already uses that interface. Typical applications include portable digital audio players, headphone-equipped personal audio products, compact consumer audio equipment, and embedded systems requiring a stereo conversion stage with a local headphone output. Integrating the DAC and headphone amplifier supports a shorter analog signal path while reducing board area compared with separate conversion and amplification stages. Circuit design should account for the low supply voltage and analog-output implementation required by the manufacturer datasheet. Decoupling, output loading, digital-interface timing, and headphone-output stability determine practical performance. Before production release, use the pin-description table and recommended application circuit in the manufacturer documentation to assign PCB tracks and select external components. This product record combines the manufacturer’s architecture and device specifications with application guidance, package information, engineering design notes, and a side-by-side comparison. These resources help engineers assess the PCM1770PW for compact stereo audio designs while separately confirming electrical limits and pin-level implementation details.

Permintaan RFG Kontak
PCM1772PW - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1772PW

PCM1772PW - 24-Bit Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1772PW is a 24-bit, low-power stereo audio digital-to-analog converter with integrated line-out circuitry and software control, housed in a 16-pin TSSOP package. It supports I2S audio data at sample rates up to 50 kSPS and is designed to provide 98 dB signal-to-noise ratio for compact audio systems. The device accepts digital stereo audio, converts it into analog left and right channels, and drives the line outputs through its integrated amplifier circuitry. An audio DAC is a signal-conversion IC that transforms digital audio samples into continuous analog voltages suitable for amplification, headphone stages, mixer inputs, or line-level equipment. It belongs to the digital-to-analog converter category within broader data-conversion and signal-processing integrated circuits. Its digital interface connects to an audio codec or processor, while the line outputs connect to the next analog stage in the signal chain. The PCM1772PW combines a 24-bit conversion resolution, a maximum 50 kSPS sampling rate, and 98 dB SNR in one low-power CMOS device. Software-controlled operation allows the host processor to manage supported device functions without a dedicated control microcontroller. Its stereo line-out architecture reduces the need for external output amplifiers in conventional line-level audio designs, although output loading, coupling, and headroom still require careful evaluation. Texas Instruments describes the converter architecture as an enhanced multilevel design using noise shaping and multilevel amplitude quantization. These techniques are intended to improve dynamic performance and clock-jitter tolerance compared with a basic binary conversion approach. The PCM1772 and related PCM family devices are monolithic CMOS integrated circuits combining stereo DACs, line-out circuitry, and support functions in compact packages. Typical uses include digital active speakers, compact audio appliances, consumer audio equipment, computer peripherals, and embedded audio systems that receive standard I2S streams. In these applications, the PCM1772PW can establish an analog line output close to the digital audio source, reducing system size while retaining a conventional stereo line-output interface. Its 24-bit resolution is also useful in designs where the host digital audio source provides higher-resolution samples. The most important design check is the relationship between the digital audio source, clocking method, supported audio format, analog output loading, and power-supply arrangement. Use the pin-description table and recommended application circuit in the manufacturer datasheet when assigning tracks, selecting output components, and validating signal levels. Confirm whether the required I2S master or slave relationship and clock configuration match the surrounding codec or processor. This product page consolidates the confirmed PCM1772PW capabilities, package information, sourcing workflow, and engineering guidance. It also distinguishes confirmed same-family alternatives from unsupported cross-package substitutions, helping engineers identify candidates while still requiring a final pin, timing, interface, and acoustic review before PCB release.

Permintaan RFG Kontak
PCM1772PWR - 24-Bit Stereo DAC with Line Output | Texas Instruments
PCM1772PWR

PCM1772PWR - 24-Bit Stereo DAC with Line Output | Texas Instruments

The Texas Instruments PCM1772PWR is a 24-bit stereo audio digital-to-analog converter with integrated line-output circuitry, designed for low-voltage and low-power audio systems. It uses a serial I2S-compatible interface, supports a 50 kHz sampling rate, and provides a 16-pin TSSOP (PW) package. The device is identified by TI as a 98 dB SNR low-power stereo DAC with line-out and software control. A DAC converts digital audio samples into an analog voltage that can drive an audio amplifier, headphone stage, mixer, or line-level input. The PCM1772PWR is a stereo converter with two analog output channels and integrated line-output circuitry, reducing the need for separate output buffers in many compact audio products. Its 24-bit data resolution is suitable for CD-derived audio, digital media players, communication terminals, and embedded audio equipment. The PCM1772 uses TI’s enhanced multilevel delta-sigma architecture, combining noise shaping with multilevel amplitude quantization to improve dynamic performance and tolerance to clock and data errors. The 98 dB SNR specification indicates a low-noise conversion path, while the integrated line-output amplifier simplifies analog routing to downstream circuitry. The serial three-wire interface reduces pin count compared with parallel DAC architectures and supports digital audio from microcontrollers, decoders, and audio processors. Typical applications include portable and compact audio equipment, USB and digital-audio accessories, communication consoles, consumer audio modules, and low-voltage stereo playback systems. The 16-pin TSSOP package also simplifies PCB assembly in designs where surface-mount construction is required. When designing around the PCM1772PWR, pay particular attention to digital-interface timing, analog output filtering, supply decoupling, and the distinction between digital ground and analog ground connections. Use the manufacturer datasheet pin-description table and recommended application circuit when assigning signal, power, and return paths on the PCB.

Permintaan RFG Kontak
PCM1782DBQ - 24-Bit Stereo Audio DAC | Texas Instruments
PCM1782DBQ

PCM1782DBQ - 24-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1782DBQ is a 24-bit stereo audio digital-to-analog converter with a nominal 192 kHz sampling rate, support for sampling rates up to 200 kHz, and an I2S interface in a 16-lead SSOP package. The converter uses TI's enhanced multilevel delta-sigma architecture, which combines high-resolution audio conversion with improved tolerance to clock jitter. It also includes programmable functions accessed through a three-wire serial control port. An audio DAC is a data-converter IC that transforms digital audio samples into left and right analog voltage signals for subsequent amplification and loudspeaker or headphone drive. In the broader hierarchy, the PCM1782DBQ belongs to the digital-to-analog converter class, within interface and signal-conversion ICs, and ultimately within semiconductor devices used in professional and consumer audio systems. The principal specifications of the PCM1782DBQ include 24-bit resolution, a 192 kHz sampling-rate designation, support for I2S audio data, and a 16-lead SSOP package. According to the Texas Instruments product page, the PCM1780, PCM1781, and PCM1782 share the same CMOS monolithic converter family and use enhanced multilevel delta-sigma conversion. The PCM1782 provides the complete set of user-programmable functions through its three-wire serial control port. The delta-sigma architecture performs digital noise shaping before converting the filtered digital stream into an analog output. Its multilevel implementation is intended to improve dynamic performance and reduce sensitivity to timing variation in the incoming clock. For system design, this makes the device appropriate when a compact stereo conversion stage is required without moving to a larger multichannel audio-converter package. Exact analog performance values and operating limits should be confirmed from the manufacturer datasheet for the selected production configuration. Typical applications include digital mixing consoles, professional audio interfaces, stereo monitor controllers, broadcast equipment, digital instruments, and high-fidelity playback systems. In these systems, the PCM1782DBQ can accept digital audio from a transport or audio processor and provide separate analog outputs for left and right channels. The three-wire control interface permits configuration of supported device functions when the host system includes the appropriate register-control sequence. A key implementation consideration is the relationship between the master clock, serial audio clock, and data timing. The converter must receive correctly timed I2S data, and the PCB should keep clock and data routing short and away from noisy switching nodes. Analog output filtering and grounding should follow the reference circuitry in the manufacturer datasheet, because incorrect filter implementation can affect channel balance and audible noise performance. This product page combines the exact PCM1782DBQ family identification, practical interface guidance, family-level alternatives, and design-focused comparisons. It helps engineers evaluate clocking, control, package, and replacement considerations before beginning an audio-converter design.

Permintaan RFG Kontak
PCM1789PWR - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1789PWR

PCM1789PWR - 24-Bit 192kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1789PWR is a high-performance, 24-bit stereo audio digital-to-analog converter with differential outputs, supported sampling rates from 8 kHz to 192 kHz, and a 113 dB SNR rating. The device is packaged in a 24-pin TSSOP (PW) surface-mount package. Its enhanced multi-level delta-sigma architecture supports 16-, 20-, 24-, and 32-bit digital audio input words through a flexible serial audio interface. An audio digital-to-analog converter, or audio DAC, converts digital PCM samples into analog voltage signals suitable for headphone, line-level, or power-amplifier inputs. Within the signal-chain hierarchy, the PCM1789 is an audio DAC, a data-converter IC, and a signal-conversion device used between a digital audio source and an analog output stage. Differential outputs can support balanced analog connections while reducing sensitivity to ground-borne noise. Key features include software-programmable digital attenuation, soft mute, de-emphasis, and user-programmable hardware control functions. The control architecture supports three-wire SPI-compatible and two-wire I2C-compatible serial interfaces, while the audio data interface supports I2S-format operation. These features allow the converter to be configured for attenuation levels, mute behavior, and system operating modes without requiring a separate external control controller for every adjustment. The enhanced multi-level delta-sigma modulator is designed for high-resolution playback while supporting a broad range of sample rates. Differential analog outputs provide two audio channels, and the available interface options make the device suitable for systems using either serial control buses or discrete hardware-control lines. The reported 113 dB SNR makes the PCM1789 relevant to high-fidelity audio equipment where dynamic-range margin is important. Typical applications include premium CD and DVD player audio paths, digital broadcast receivers, professional audio mixers, sampling-rate converters, home-theater receivers, and high-end portable audio equipment. Its 192 kHz capability also supports high-resolution source material, although system clocking and output reconstruction must be designed to preserve the converter's full performance. For PCB design, keep the analog output routing short, place decoupling capacitors near the supply pins, and follow the manufacturer pin-description table when assigning connector and control-signal routing. Differential outputs should be routed with matched geometry where practical, and the exposed digital signals should remain separated from sensitive analog output paths to minimize crosstalk.

Permintaan RFG Kontak
PCM1792ADB - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1792ADB

PCM1792ADB - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1792ADB is a 24-bit stereo digital-to-analog converter with support for 192 kHz sampling and differential current outputs, housed in a 28-pin SSOP (DB) package. It uses the manufacturer’s advanced-segment DAC architecture and is designed for high-performance digital audio equipment. The device operates from dual analog supplies, supports digital audio interfaces, and includes digital filtering for professional and audiophile signal chains. A DAC is a digital-to-analog converter, a signal-conversion IC that transforms digital audio samples into a continuous analog voltage or current representation. Within the signal-chain hierarchy, the PCM1792ADB belongs to the audio converter family, connects digital source equipment to an analog output stage, and operates as part of a broader audio signal-processing system. Its balanced current outputs allow designers to optimize analog gain, noise behavior, and channel matching in the subsequent circuitry. Key performance figures include 24-bit resolution, a maximum sampling rate of 192 kHz, a differential output current of 7.8 mA peak-to-peak, and a dynamic range of 132 dB for mono operation at 9 V rms. Stereo dynamic range reaches 129 dB at 4.5 V rms and 127 dB at 2 V rms. Total harmonic distortion plus noise is specified at 0.0004%, making the converter suitable for demanding audio playback, studio monitoring, digital mixing, and multichannel audio systems. The advanced-segment DAC architecture is designed to provide strong dynamic performance and improved tolerance to clock jitter. Digital filtering is part of the conversion path, while the balanced differential outputs support low-noise analog design. Because the device produces current rather than a direct voltage output, an external operational-amplifier or current-to-voltage stage is normally required to establish the final analog output voltage and accommodate the desired channel gain. Typical applications include professional digital mixers, high-resolution CD and DVD player analog stages, audio DAC products, studio monitors, and digital recording equipment. The converter is also appropriate for consumer and industrial systems requiring 24-bit playback through 192 kHz. In these systems, the PCM1792ADB handles the conversion stage while external circuitry performs current-to-voltage conversion, analog filtering, gain setting, and output isolation. The main design consideration is supply planning. The device uses dual analog supplies, and its specified dynamic range changes with operating voltage: 132 dB at 9 V rms mono, 129 dB at 4.5 V rms stereo, and 127 dB at 2 V rms stereo. Board layout should keep digital-clock and data traces away from sensitive analog output paths, while the analog output stage must preserve the converter’s balanced symmetry. This product page combines the manufacturer’s core architecture information, exact PCM1792ADB orderable identifiers, package details, operating limits, application guidance, and same-package family comparisons. It also identifies where engineering data such as the complete pin description, electrical characteristic curves, and recommended external circuits must be taken directly from the manufacturer datasheet.

Permintaan RFG Kontak
PCM1792DB - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1792DB

PCM1792DB - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1792DB is a 24-bit stereo digital-to-analog converter supporting 192 kHz PCM sampling and 200 kHz DSD operation, housed in a 28-lead SSOP package. It uses advanced segment DAC architecture, balanced differential current outputs, and a serial control interface for programmable audio operation. The converter is designed for high-fidelity audio systems requiring low distortion and high dynamic range. An audio DAC converts digital PCM or DSD data into analog voltage or current signals suitable for amplification and loudspeaker drive. Within the signal chain, it sits between a digital audio source and an analog output stage. The PCM1792DB combines two converter channels and associated support circuitry in one monolithic CMOS device, simplifying stereo audio designs while preserving independent balanced outputs. The PCM1792DB provides a dynamic range of 132 dB for mono operation at 9 Vrms and 129 dB for stereo operation at 4.5 Vrms. Its THD+N is 0.0004%, and its differential current output reaches 7.8 mA peak-to-peak. These characteristics make the converter appropriate for premium digital audio equipment, professional monitoring, USB and network audio products, and other systems where low-level analog distortion can affect sound quality. Advanced segment DAC architecture is the core technical feature of this converter. According to the manufacturer datasheet, the architecture improves dynamic performance and tolerance to clock jitter. The device uses an 8-times oversampling digital filter, balanced current outputs that allow output topology optimization, and a serial control interface for mode configuration. These functions support integration into designs requiring both PCM playback and Direct Stream Digital operation. Typical applications include high-resolution stereo DAC equipment, professional audio monitors, digital mixing consoles, USB audio interfaces, and home-theater signal processing. The differential outputs are particularly useful when the downstream amplifier or current-voltage conversion stage can preserve the benefits of balanced operation. System designers must account for the required analog supplies, output load, external conversion network, and clocking arrangement when laying out the PCB. A critical implementation consideration is maintaining clean, low-noise analog and digital supply rails. Place the bypass capacitors specified by the manufacturer close to their corresponding power pins, route high-current outputs away from sensitive digital and analog inputs, and use a symmetric ground strategy around the converter outputs. The 28-lead SSOP footprint also requires careful soldering practices because its lead pitch is relatively narrow. This page consolidates the PCM1792DB electrical characteristics, package details, application guidance, and replacement considerations into an engineering-focused reference. It also distinguishes true drop-in interchangeability from related converters and identifies the design variables that most often determine success in a high-performance audio DAC implementation.

Permintaan RFG Kontak
PCM1793DB - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1793DB

PCM1793DB - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1793DB is a 24-bit, 192 kHz sampling stereo digital-to-analog converter with balanced voltage outputs and hardware control, packaged in a 28-lead SSOP. The monolithic CMOS device combines two converter channels and support circuitry, while its advanced segment DAC architecture provides excellent dynamic performance and improved tolerance to clock jitter. Typical signal-to-noise ratio is 113 dB, typical total harmonic distortion plus noise is 0.001%, and typical full-scale output is 2.1 V rms at the postamplifier. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage waveform. The PCM1793 belongs to the broader hierarchy of stereo DAC, audio converter, signal-conversion IC, and semiconductor. Balanced voltage outputs support noise-rejecting analog signal paths, allowing a designer to optimize the output stage for the target amplifier and load. Its I2S-compatible digital interface accepts audio data from a digital audio source, while the DAC performs the final conversion before the analog output stage. The principal features are 24-bit resolution, a maximum sampling rate of 192 kHz, balanced outputs, 113 dB dynamic range, and a typical THD+N of 0.001%. Hardware control provides an external interface for adjusting supported operating functions without relying entirely on software commands. The advanced segment DAC architecture is specifically designed to improve dynamic performance and reduce sensitivity to timing variations in the incoming digital clock. The converter uses a monolithic CMOS implementation containing stereo digital-to-analog converters and associated support circuitry. Balanced voltage outputs distinguish the PCM1793 from converters that provide differential current outputs. At the postamplifier, a typical full-scale output of 2.1 V rms provides a defined analog reference level for subsequent voltage amplification or line-level routing. Its operating supply range is 4.5 V to 5.5 V. Typical applications include high-resolution stereo audio equipment, CD and DVD player digital audio paths, professional audio converters, powered speakers, headphone-amplifier front ends, and digital audio system boards. The balanced output topology is useful when the downstream circuitry supports balanced inputs, while a carefully designed single-ended summing network can serve conventional line outputs. Designers should treat the power supply, digital clock, ground layout, and output network as a complete signal-chain design. Place decoupling and output-network components close to their associated pins, keep analog return paths separate from switching and digital return currents, and provide filtering appropriate to the audio bandwidth. The SSOP package also requires attention to solder-joint quality and thermal conditions during assembly. This product overview combines converter architecture, key electrical characteristics, application guidance, package information, and sourcing-oriented details. It is intended to help engineers determine whether the PCM1793DB's balanced voltage output, dynamic performance, and interface characteristics fit a stereo DAC design before beginning a detailed schematic and layout review.

Permintaan RFG Kontak
PCM1793DBR - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1793DBR

PCM1793DBR - 24-Bit 192kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1793DBR is a 24-bit, 192 kHz stereo digital-to-analog converter with a 113 dB dynamic range, 113 dB SNR, and 0.001% typical THD+N, housed in a 28-lead SSOP package. The converter uses balanced differential voltage outputs and a three-wire serial audio interface for high-resolution digital-to-analog conversion. An audio DAC is an interface IC that converts digital audio samples into analog voltage signals suitable for amplifiers, headphones, line outputs, and audio conversion equipment. The PCM1793 belongs to the DAC hierarchy within analog and mixed-signal semiconductors, combining a stereo DAC core, digital filtering, clock-jitter tolerance, and output circuitry in one monolithic CMOS device. Its segment DAC architecture separates the current-steering operation into smaller segments, improving linearity and dynamic performance. Principal features include advanced segment DAC architecture, balanced outputs, 24-bit resolution, sampling rates up to 192 kHz, and improved tolerance to clock jitter. According to the manufacturer datasheet, analog performance is measured at the PCM1793 output using an Audio Precision System Two Cascade system with a 20 kHz AES17 measurement filter. The specified 113 dB dynamic range and 113 dB SNR support demanding consumer and professional audio paths. The PCM1793 is a monolithic CMOS integrated circuit containing two stereo converter channels and their support circuitry. Its differential outputs provide a balanced signal path that can optimize analog output implementation and reduce common-mode effects in downstream circuitry. A typical full-scale differential output is 2.1 V rms at the postamplifier, while the digital side accepts serial audio data through a three-wire interface. Typical applications include high-resolution digital audio players, professional audio interfaces, USB and network audio equipment, home-theater receivers, and digital mixing consoles. It is also suitable for portable listening equipment when board area, power consumption, and balanced-output integration are important. The 28-lead SSOP package simplifies assembly in designs that already use surface-mount audio converters. When laying out a PCM1793 board, place decoupling capacitors close to the analog and digital supply pins, route audio data and clock signals away from analog outputs, and provide a clean return path for the balanced outputs. Verify the external clock, serial-data timing, digital-filter configuration, and output circuitry against the manufacturer application guidance before production. This page combines the PCM1793 technical specifications with practical application guidance, same-family drop-in candidates, a parameter comparison, and PCB-oriented design notes. These engineering resources help shorten component selection and support a deliberate transition from the 28-lead SSOP datasheet specification to a complete stereo DAC implementation.

Permintaan RFG Kontak
PCM1794DB - 24-Bit 192kHz Stereo DAC | Texas Instruments
PCM1794DB

PCM1794DB - 24-Bit 192kHz Stereo DAC | Texas Instruments

The Texas Instruments PCM1794DB is a 24-bit stereo digital-to-analog converter supporting sampling rates up to 192 kHz. It uses advanced segment DAC architecture, includes support circuitry, and is packaged in a 28-lead SSOP. The converter provides balanced current outputs, allowing the analog output stage to be optimized for either differential or single-ended signal-chain architectures. A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage or current representation. The PCM1794DB belongs to the stereo audio DAC category within the broader ADC/DAC and interface-converter hierarchy. It is designed for high-resolution audio equipment, where digital source quality must be translated into a low-distortion analog output for headphone, line, or preamplifier stages. Key features include 24-bit data resolution, 192 kHz maximum sampling capability, advanced segment DAC architecture, balanced current outputs, and support for common digital audio interfaces including I2S, PCM, and left-justified formats. The manufacturer describes the converter as a monolithic CMOS integrated circuit with improved tolerance to clock jitter. Its balanced outputs support flexible analog signal routing while preserving channel symmetry. The PCM1794DB is normally used with external current-to-voltage conversion, filtering, and output-buffer circuitry. The balanced output architecture can reduce even-order distortion and common-mode effects when paired with a suitably matched analog stage. The converter also includes digital control functions for reset and operating-mode configuration, allowing it to be coordinated with an audio system clock and source device. Typical applications include high-resolution stereo DAC modules, USB and network audio converters, CD-quality playback equipment, digital mixing consoles, headphone amplifiers, and balanced line-output stages. The 192 kHz sampling capability makes it appropriate for studio monitoring and archival audio systems, although system clocking and analog implementation remain important to achieving the intended performance. When laying out a PCM1794DB circuit, keep digital clock and data traces away from the sensitive analog output network, use short and properly terminated clock routes, and place filtering and I/V components close to their associated pins. Verify power sequencing, reset timing, and the required 1024 system-clock initialization period before enabling normal audio operation. This product page consolidates the manufacturer device information, distributor identification, package details, and practical implementation guidance for engineers evaluating the PCM1794DB in a new audio-converter design.

Permintaan RFG Kontak
PCM1794DBR - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments
PCM1794DBR

PCM1794DBR - 24-Bit 192 kHz Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1794DBR is a 24-bit, 192 kHz sampling stereo digital-to-analog converter with hardware control, designed for high-performance audio signal chains. The device supports I2S digital audio input and is packaged in a 28-lead SSOP package. According to the Texas Instruments product page, the PCM1794 family provides 132 dB SNR, making it suitable for demanding audio DAC, digital preamplifier, and multimedia audio applications. The PCM1794DBR combines a stereo DAC architecture with support circuitry in a compact surface-mount package intended for audio equipment requiring high-resolution conversion and precise output control. A digital-to-analog converter, or DAC, is an integrated circuit that converts digital audio samples into continuous analog voltage signals. The PCM1794 belongs to the broader digital-to-analog converter category within data-converter and audio IC families. Its stereo architecture produces left and right analog outputs from a digital audio stream, while the 24-bit resolution and 192 kHz sampling capability support high-resolution playback formats. In a complete audio system, the DAC typically sits between a digital audio source, such as a transport, streamer, USB interface, or digital mixer, and the analog output stage. Key features include 24-bit resolution, sampling rates up to 192 kHz, I2S digital audio support, stereo operation, and 132 dB SNR. The 28-lead SSOP package provides the physical interface for digital data, clock signals, control signals, analog outputs, and power connections. These characteristics make the converter useful in CD-quality playback systems as well as higher-resolution audio equipment. Hardware control allows system designers to adjust operating behavior through external control signals rather than relying exclusively on software registers. The PCM1794 is a monolithic CMOS integrated circuit that includes stereo digital-to-analog converters and associated support circuitry. Its architecture is intended to provide a straightforward digital-audio-to-analog conversion stage while preserving the dynamic-range capability required by premium audio products. The converter can be paired with a high-quality output filter, headphone amplifier, line amplifier, or analog preamplifier to create a complete playback path. System clocking and digital-interface timing remain important design considerations, so the manufacturer datasheet should be used for signal timing, pin connections, and recommended application circuits. Typical applications include high-resolution audio DAC boards, CD and DVD player designs, network audio players, digital mixing consoles, active speakers, professional audio equipment, and multimedia systems. The 132 dB SNR figure is particularly relevant when minimizing converter-generated noise and preserving dynamic range. For designs requiring a very low-noise analog output, the DAC should be followed by appropriately designed analog stages and power-supply arrangements that do not degrade the converter's performance. When designing around the PCM1794DBR, place decoupling capacitors close to the power pins and route digital clock and data signals away from sensitive analog output paths. Confirm the device's pin names and connection requirements against the Texas Instruments datasheet before layout release. The most important selection trade-off is whether the application requires the PCM1794's 24-bit, 192 kHz stereo performance and hardware control, or whether a related device with different filter, output, or clock characteristics would better match the product architecture. This product page combines the Texas Instruments PCM1794 specifications with practical application guidance, comparison criteria, package information, and drop-in replacement notes. It is intended to help engineers evaluate the PCM1794DBR for audio DAC and signal-chain designs, while directing detailed sourcing and current commercial questions to the Request a Quote workflow.

Permintaan RFG Kontak
PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments
PCM1795DBR

PCM1795DBR - 32-Bit Stereo Audio DAC | Texas Instruments

Texas Instruments PCM1795DBR is a 32-bit, 192 kHz sampling stereo audio digital-to-analog converter with two balanced current outputs, housed in a 28-pin SSOP package. It uses advanced segment DAC architecture, supports DSD playback up to 200 kHz, and operates from a 5 V analog supply with a 3.3 V digital supply. A stereo audio DAC converts digital PCM, I2C, SPI, or TDMCA audio data into left- and right-channel analog signals. Within the signal-chain hierarchy, the PCM1795 belongs to the DAC family of audio converters, which supports playback from digital sources, home-theater equipment, professional audio hardware, and network-audio systems. Its dual-channel architecture provides separate analog outputs for balanced stereo audio paths. The converter resolves 32-bit input data and supports sampling rates through 192 kHz. Its advanced segment architecture is designed for high dynamic performance and improved tolerance to clock jitter. Manufacturer test conditions specify 5 V for VCC1, VCC2L, and VCC2R, 3.3 V for VDD, a 48 kHz sampling rate, a 256 fS system clock, and 32-bit data. The PCM1795DBR provides two balanced current outputs, allowing the analog signal path to be optimized for the selected output implementation. Its stated dynamic-performance value includes 123 dB typical signal-to-noise ratio and 123 dB typical common-mode rejection. These characteristics make the device suitable for precision digital-to-analog conversion where channel separation and low-level noise are important. Typical uses include high-resolution stereo audio playback, CD and network-player output stages, USB-audio interfaces, and professional audio equipment. A designer can also use the converter in DSD-capable equipment because the manufacturer lists support for DSD playback at up to 200 kHz. Balanced outputs simplify matching between the converter and downstream differential analog stages. The principal design task is implementing a low-noise analog output network around the current outputs. Supply routing, output-stage components, clocking, grounding, and digital-interface isolation should follow the manufacturer datasheet. Because the converter contains analog and digital domains, separating noisy digital return paths from sensitive output references is as important as selecting suitable supply bypassing components. This product page combines the manufacturer's architecture description with package, interface, supply, and performance details, then organizes replacement guidance and practical design considerations for engineers evaluating the PCM1795DBR.

Permintaan RFG Kontak
PCM1796DB - 24-Bit 192 kHz Stereo DAC | Texas Instruments
PCM1796DB

PCM1796DB - 24-Bit 192 kHz Stereo DAC | Texas Instruments

Texas Instruments PCM1796DB is a 24-bit stereo audio digital-to-analog converter with a sampling rate of 192 kHz, 123 dB SNR, balanced current outputs, and a 28-lead SSOP package. It uses TI's advanced segment DAC architecture to provide strong dynamic performance and improved tolerance to clock jitter for high-fidelity audio systems. An audio DAC is a data-conversion IC that transforms digital PCM samples into analog current signals suitable for a downstream operational amplifier, reconstruction filter, or speaker system. Within the semiconductor hierarchy, a DAC belongs to the ADC/DAC class of data-converter ICs. The PCM1796DB is designed for stereo audio conversion where signal fidelity, channel balance, and compatibility with digital audio interfaces are primary design considerations. The converter supports 24-bit resolution and operation up to 192 kHz, while the listed DSD capability reaches 200 kHz. Its 123 dB signal-to-noise ratio supports low-noise conversion in demanding listening equipment. Balanced current outputs provide a flexible analog architecture, allowing the designer to optimize the external amplifier and filtering stages. Software control supports configurable system behavior when the DAC is managed by an audio controller or digital audio interface. Internally, the PCM1796DB combines stereo digital-to-analog converters and support circuitry in one monolithic CMOS device. The segment DAC architecture separates the conversion function into smaller segments, improving dynamic behavior and reducing sensitivity to timing errors in the digital audio stream. This architecture is particularly useful in designs where incoming clock jitter could otherwise affect the analog output. Typical applications include high-resolution CD and DVD audio players, network audio receivers, digital music systems, professional audio equipment, home-theater processors, and multichannel audio platforms. The balanced current-output topology can support transformer-balanced or line-level single-ended outputs when paired with suitable external circuitry. The converter is especially appropriate when a design requires 24-bit resolution and high sampling rates without using an external discrete DAC architecture. The principal design consideration is the analog output stage. Because the device produces current rather than a finished voltage, component selection, current-to-voltage conversion, ground treatment, and reconstruction filtering directly influence sound quality. Place the DAC, its digital interface components, and the analog output circuitry according to the pin descriptions and application information in the manufacturer datasheet. Maintain the stated supply ranges of 3 V to 3.6 V and 4.75 V to 5.25 V. This product page combines manufacturer specifications, application guidance, package information, and compatibility considerations for engineers evaluating the PCM1796DB. It also highlights the significance of its segment DAC architecture, 123 dB SNR, 192 kHz sampling capability, and 28-pin SSOP implementation when planning a high-fidelity audio converter stage.

Permintaan RFG Kontak
PCM1796DBR - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments
PCM1796DBR

PCM1796DBR - 24-Bit 192kHz Stereo Audio DAC | Texas Instruments

The Texas Instruments PCM1796DBR is a 24-bit, 192 kHz sampling stereo audio digital-to-analog converter built on TI's advanced segment DAC architecture, housed in a 28-lead SSOP (DBR) package. It delivers balanced current outputs, digital filtering, programmable gain and DSD-compatible operation for high-fidelity audio equipment. A DAC (digital-to-analog converter) is an audio-class signal-chain IC that reconstructs a continuous analog voltage or current waveform from a digital bitstream. As a member of the broader digital-to-analog converter family, the PCM1796 belongs to the ADC/DAC category of data converters, which sit between digital audio transports and analog amplification stages, ultimately forming part of a power-management- and signal-integrity-managed audio system. Its balanced current-output topology is the classical high-end audio architecture because current-output DACs are far less sensitive to voltage-reference drift and to clock jitter than voltage-output devices. Key features include 24-bit resolution at up to 192 kHz sampling, an advanced segment DAC core for low distortion, a jitter-tolerant three-wire serial interface for left/right clock, bit clock and data, programmable output gain, selectable digital filters and support for Direct Stream Digital streams up to 200 kHz DSD. Dynamic performance is characterized by very low total harmonic distortion plus noise and high signal-to-noise ratio, with the datasheet measurement conditions defined by a 20 Hz high-pass filter and a 20 kHz AES17 low-pass filter. Internally, the data converters use TI's advanced segment DAC architecture, which divides the conversion into multiple current-steering segments to reduce the glitch energy generated at each code transition. That segmentation, combined with the jitter-insensitive data latch, is why the PCM1796 is commonly selected for CD, DVD, SACD, network and USB audio products where inter-channel and inter-sample errors are audible. Analog outputs are provided as differential current pairs so designers can balance each channel in the analog domain or drive a single-ended stage. Typical applications include CD and DVD player digital output stages, SACD and optical-disc player DAC sections, network audio streamers, USB and computer audio interfaces, digital mixing consoles, headphone amplifier front ends and multi-channel home cinema audio processors. The balanced outputs pair naturally with the analog stages found in these systems. When designing around the PCM1796DBR, treat the analog output as a current source: the output must be terminated by an I-to-V conversion stage, usually a resistor load plus an operational amplifier, and the load impedance directly shapes the achievable output voltage and distortion. Keep the digital interface short, provide a clean low-noise supply, and observe the recommended decoupling so clock jitter and supply ripple do not dominate the converter's own noise floor. This page consolidates the manufacturer specifications, a structured drop-in replacement set drawn from the same TI stereo-DAC family, and practical analog and layout guidance that a datasheet alone does not present in engineering-decision form.

Permintaan RFG Kontak
PCM1800E - 20-Bit 48 kSPS Stereo ADC | Texas Instruments
PCM1800E

PCM1800E - 20-Bit 48 kSPS Stereo ADC | Texas Instruments

The Texas Instruments PCM1800E is a 20-bit stereo analog-to-digital converter (ADC) with single-ended analog inputs, a maximum sampling rate of 48 kSPS, a 4.5 V to 5.5 V supply range, and a 24-pin SSOP package. It converts two analog input channels into digital data and is intended for cost-sensitive consumer audio equipment. According to the Texas Instruments PCM1800 product page, the converter uses a delta-sigma modulator, 64-times oversampling, a digital decimation filter, and a serial interface supporting master and slave modes. An ADC is a mixed-signal semiconductor that converts continuously varying analog voltages into numerical values suitable for digital processing. The PCM1800 belongs to the delta-sigma ADC family and the broader data-converter and signal-processing IC hierarchy. Its single-ended inputs simplify source connections when the signal source can be referenced adequately against the converter's analog ground. Digital audio equipment commonly uses this architecture to support CD-compatible 44.1 kSPS and 48 kSPS playback or recording rates. Key features of the PCM1800E include dual 20-bit monolithic conversion, single-ended voltage inputs, 64-times oversampling, and four supported data formats. The decimation filter has a stated passband ripple of ±0.05 dB and stopband attenuation of -65 dB. The reported signal-to-noise ratio is 95 dB, making the device relevant to audio preamplifiers, consumer receivers, digital mixers, and other systems requiring stereo audio capture at 48 kSPS. The delta-sigma architecture converts the analog signal through oversampling and digital filtering before producing the final serial output. PCM1800 documentation identifies both master and slave operating modes, allowing the converter either to generate the serial clock or synchronize it with an external audio processor. Four data formats provide design flexibility when connecting the ADC to codecs, digital audio processors, microcontrollers, or programmable logic. The serial interface and decimation filter therefore form the boundary between the analog audio inputs and the digital signal path. Typical PCM1800E applications include stereo consumer audio capture, digital recording equipment, audio mixer inputs, consumer media systems, and digital signal processing front ends. In a typical signal chain, a stereo source is buffered, level-shifted into the ADC input range, sampled by the delta-sigma modulator, decimated, and transferred to a digital audio processor through the serial interface. The 48 kSPS rate supports professional audio-standard sampling rates but does not itself provide the analog front-end gain, anti-alias filtering, clock generation, or output audio processing required by a complete system. A key design consideration is preserving signal integrity at the single-ended analog inputs and the digital serial interface. Input routing should minimize noise pickup, keep the analog and digital return paths controlled, and account for the converter's input voltage range. Clock and data traces require suitable timing margins, while bypass capacitors should be placed close to the supply pins. The SSOP-24 package is suitable for compact designs, but its lead pitch and exposed analog, digital, and supply connections demand careful layout and assembly. This page consolidates the verified PCM1800 family specifications, source links, application guidance, and replacement-status analysis into one engineering-focused reference. It also separates published facts from unavailable details so designers can identify what must still be confirmed in the manufacturer datasheet before schematic release, PCB layout, or production qualification.

Permintaan RFG Kontak
PCM1801U - 16-Bit Stereo Audio ADC | Texas Instruments
PCM1801U

PCM1801U - 16-Bit Stereo Audio ADC | Texas Instruments

The Texas Instruments PCM1801U is a 16-bit, stereo, single-ended audio analog-to-digital converter with a 48 kSPS conversion rate, 64-times oversampling, and a serial interface, housed in a 14-pin SOIC package. It is designed for cost-sensitive consumer audio equipment where a compact stereo converter with typical 93 dB SNR and -88 dB THD+N performance is required. An audio ADC is a mixed-signal semiconductor that converts left- and right-channel analog voltages into digital sample data for processing, storage, or transmission. The PCM1801 belongs to the ADC and DAC hierarchy, uses a delta-sigma modulator and digital decimation filter, and supports slave-mode operation with two serial data formats. This architecture provides a practical bridge between analog audio sources and digital audio systems. Key features include dual 16-bit monolithic conversion channels, single-ended analog voltage inputs, 64-times oversampling, a 48 kSPS maximum sampling rate, and a serial output interface. The decimation filter has a specified passband ripple of ±0.05 dB and stopband attenuation of -65 dB. Typical signal-chain performance includes THD+N of -88 dB, SNR of 93 dB, and dynamic range of 93 dB. Internally, the PCM1801 uses a delta-sigma modulator followed by a digital decimation filter to reduce aliasing and shape quantization noise. Its serial interface supports slave operation and two data formats, giving the system designer flexibility in clocking and data framing. The single-ended inputs simplify source interfacing, although input filtering, grounding, and source impedance remain critical to achieving the stated audio performance. Typical uses include consumer digital audio equipment, stereo recording products, USB audio interfaces, set-top boxes, and other compact audio systems requiring two analog inputs and a serial digital interface. The 48 kSPS rate aligns with standard CD-rate audio, while the 14-pin SOIC package simplifies assembly in cost-sensitive designs. When laying out the circuit, place input and decoupling capacitors close to their associated pins, maintain a low-impedance ground return for the analog section, and route serial clock and data traces away from sensitive analog inputs. Verify the external interface voltage levels and serial timing before connecting the converter to a host processor. This product page consolidates verified manufacturer and distributor information, price context, package details, application guidance, and substitution limitations. It distinguishes documented specifications from missing data and avoids presenting electrically different converters as guaranteed drop-in replacements.

Permintaan RFG Kontak