Sirkuit Terpadu

S912XEG128J1CAL

S912XEG128J1CAL - 16-Bit 128KB MCU, 112-LQFP | NXP

The NXP Semiconductors S912XEG128J1CAL is a 16-bit HCS12X microcontroller with 128KB flash memory and a 112-terminal industrial-temperature LQFP package. The verified product listing identifies 112 gull-wing terminals, a square QFP package, and a 20 mm by 20 mm LQFP-112 form factor. Its S912XEG128 designation places it in the S912X device family, while the L suffix in S912XEG128J1 identifies the performance grade shown in the verified data. A microcontroller is an embedded-computing semiconductor that integrates a processor core, program memory, data memory, peripherals, and interface circuitry into one package. The HCS12X family belongs to the broader MCU and embedded-processor hierarchy. Engineers use MCUs to implement real-time control, communications, sensing, and actuator logic without requiring a separate general-purpose processor. In this part, the verified data confirms a 16-bit architecture and 128KB (128K x 8) flash, which provide the core program-storage foundation for embedded control firmware. The supplied listing identifies the S912XEG128J1CAL as an industrial-temperature component. Its LQFP-112 package exposes substantially more connection points than a small QFP, supporting the broader peripheral and signal requirements of a complex embedded controller. The square gull-wing package is suitable for automated surface-mount assembly, while its 112 terminals provide dense routing capacity around the device. The verified data does not establish the complete peripheral list, core frequency, RAM capacity, or individual pin functions, so those values require confirmation from the official manufacturer documentation. Typical uses for this controller include industrial equipment, automotive or transportation electronics, communications equipment, and embedded automation systems where a 16-bit MCU and 128KB flash are appropriate. The architecture can support real-time control loops and firmware-heavy peripheral coordination. Exact suitability depends on clock speed, memory map, electrical limits, peripheral availability, and package-level pin compatibility, none of which are fully provided in the verified dataset. A key design consideration is that LQFP-112 assembly demands careful PCB fanout, decoupling, and signal-integrity planning. Because the package has a 20 mm by 20 mm footprint, route escape for 112 terminals and verify the manufacturer's recommended land pattern before layout release. Do not substitute a mechanically similar part without confirming pin names, power rails, clock pins, programming interfaces, and software-device mapping. This page consolidates the verified distributor findings for S912XEG128J1CAL, identifies the 16-bit HCS12X architecture, 128KB flash configuration, industrial temperature grade, and 112-LQFP package, and separates confirmed data from specifications that still require manufacturer confirmation. It also records candidate sourcing links and explains why a complete drop-in replacement list cannot responsibly be asserted from the available cross-reference results.

Permintaan RFG Kontak

S912XEG128J1MAA

S912XEG128J1MAA - 16-bit HCS12X MCU 128KB Flash QFP-80 | NXP

The NXP S912XEG128J1MAA is a 16-bit HCS12X microcontroller with an S12X core running at 50 MHz bus speed, 128 KB Flash, 12 KB RAM, packaged in an 80-pin LQFP (14x14 mm, MAA suffix). It integrates an XGATE co-processor that accelerates virtual peripheral handling and offloads interrupt-driven tasks from the CPU, and is AEC-Q100 qualified for automotive applications across -40C to +125C. An HCS12X microcontroller is a 16-bit automotive-grade MCU family combining the legacy HCS12 instruction set with the XGATE auxiliary RISC engine and a memory protection unit (MPU). MCUs sit at the bottom of the embedded computing hierarchy (microcontroller -> embedded MCU -> automotive ECU -> vehicle electronics system), where deterministic interrupt response and peripheral integration dominate design trade-offs. Key features include 128 KB on-chip Flash with hardware-emulated EEPROM, 12-bit ADC with 3 us conversion time, Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), PWM, Low-Voltage Detect (LVD), and an integrated Watchdog. Connectivity is rich for body and chassis ECUs: 5x CAN, 2x SPI, 2x SCI, I2C, IrDA, EBI/EMI, and 59 general-purpose I/O. The XGATE co-processor boosts effective throughput, allowing real-time peripherals to be serviced without taxing the main CPU. Architecture uses the proven S12X CPU (16-bit CISC, 50 MHz) plus XGATE RISC co-processor, with supervisor/user memory protection modes and a 4-channel 24-bit Periodic Interrupt Timer chain. The 128 KB Flash supports byte-erasable program memory, and the part shares the S12XE family die across flash and RAM variants. Typical applications include automotive body controllers, HVAC climate modules, instrument clusters, CAN/J1939 network gateways, industrial PLC slave boards, and HVAC/fan controllers. The 5x CAN controllers support multi-bus automotive networks including CAN and J1939. Design consideration: pair the part with a 4.7-22 uF decoupling network, route single-ended and differential CAN pairs as 120-ohm twisted pairs, and reserve the XGATE interrupt vector space when porting legacy S12 code. This page synthesizes distributor pricing, drop-in S12X alternatives, and practical automotive design notes not aggregated in the manufacturer datasheet.

Permintaan RFG Kontak

S912XEG128J2CALR

S912XEG128J2CALR - 16-bit S12X MCU 128KB Flash | NXP | LQFP-112

The NXP S912XEG128J2CALR is a 16-bit HCS12X microcontroller unit with 128KB Flash, 12KB RAM, and 2KB EEPROM, running at 50 MHz core clock in a 112-pin LQFP (20x20 mm) package qualified for automotive temperature grades -40°C to +85°C. According to NXP product documentation, the device belongs to the S12XE family and integrates the XGATE coprocessor for offloading interrupt-driven tasks from the main CPU, a CAN 2.0AB controller, an SCI/SPI/IIC communication set, a 12-bit ADC, and PWM modules targeted at body and chassis automotive electronics. An HCS12X microcontroller is a member of the microcontroller (MCU) product category. In the broader component taxonomy, an MCU is a single-chip computer that integrates a CPU core, program memory, data memory, and peripheral I/O on one die. MCUs sit within the semiconductor hierarchy as follows: HCS12X -> 16-bit MCU -> microcontroller -> integrated circuit -> semiconductor. The "X" family extension of HCS12 adds a peripheral coprocessor (XGATE) that executes data-move and bit-manipulation routines triggered by peripheral interrupts, freeing the main CPU for control-loop or communication-stack execution. Key features of the S912XEG128J2CALR include 128KB on-chip Flash program memory with ECC, 12KB SRAM for transient data, 2KB EEPROM for non-volatile parameter storage, a 50 MHz CPU clock derived from an internal Phase-Locked Loop (PLL), four-channel MSCAN (CAN 2.0A/B) controllers, an enhanced capture timer, 8-channel PWM, a 10-bit or 12-bit successive-approximation ADC, and serial interfaces including SCI, SPI, and IIC. The device operates across a wide supply range from 1.8V to 5.5V, simplifying integration with both 3.3V and 5V analog/digital subsystems in body-electronics modules. The S12XE architecture employs a 16-bit RISC-like CPU with separate program and data buses and a hardware-assisted debugger (BDM) that supports real-time in-circuit emulation without bond-out chips. The XGATE coprocessor is a separate RISC thread capable of executing up to 100 MHz instruction cycles and operates in parallel with the main S12X CPU, significantly accelerating interrupt-intensive tasks such as CAN message handling, motor-control loops, and encoder decoding. The combination of ECC-protected flash, watchdog timer, and low-voltage reset supports ASIL-A-capable safety architectures when paired with an external watchdog or voltage supervisor. Typical applications include automotive body controllers, HVAC control modules, instrument-cluster subcontrollers, seat-control and mirror-adjust modules, CAN gateway nodes, and LIN/CAN slave ECUs. The wide operating range and automotive-grade temperature qualification make the part well suited to under-hood and cabin environments where extended thermal stress is expected. When designing with the S12XE, allocate the XGATE vector table and DMA channel priorities early in firmware planning to avoid contention with main-CPU interrupts. Use the BDM interface rather than relying on software debug loops, and consider migrating to the S12XHY family if higher ADC throughput or USB connectivity is required. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes that complement the NXP datasheet with engineering-decision context.

Permintaan RFG Kontak

S912XEG128J2MAAR

S912XEG128J2MAAR - 16-bit HCS12X MCU 128KB Flash | NXP

The NXP S912XEG128J2MAAR is a 16-bit HCS12X microcontroller IC with a 50 MHz CPU core, 128 KB of Flash program memory, and is housed in an 80-pin QFP (14x14 mm) package. It is part of the S12XEG automotive-grade family and is qualified to operate across the -40C to +125C automotive temperature range with multi-rail supply support at 1.8 V, 2.8 V, and 5 V. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program and data memory, peripherals, and I/O on one die. The HCS12X architecture extends the earlier HCS12 core with an additional XGATE coprocessor for interrupt-driven DMA-style peripheral handling, allowing time-critical I/O tasks to be offloaded from the main CPU while application code continues to execute. Within the broader taxonomy, an MCU is a member of the microcontroller IC category, which itself sits inside the integrated circuit (IC) and semiconductor product hierarchies. Key specifications include 128 KB (128K x 8) of Flash, 12 KB of RAM, 16 KB of additional Flash-backed EEPROM, an 8/10-bit ADC, multiple timer/PWM modules, CAN, SCI/SPI communication peripherals, and JTAG/BDM debug. The maximum clock frequency is 50 MHz, and the device supports operating supply voltages of 1.8 V, 2.8 V, and 5 V. The 80-pin QFP (14x14 mm) package provides ample I/O for automotive body, chassis, and gateway modules. Typical applications include automotive body controllers, instrument clusters, HVAC control modules, lighting controllers, CAN-based sensor nodes, and small engine control units. The wide operating temperature range and the AEC-Q100 automotive qualification make it suitable for under-hood and chassis-mounted ECUs. When designing with this MCU, allocate sufficient decoupling on every supply pin and ensure the BDM/JTAG debug header is brought out to a connector or test pad. Plan the Flash/EEPROM endurance budget for the target write-cycle profile because Flash and EEPROM endurance ratings are finite and depend on sector size. This page synthesizes distributor pricing, drop-in alternatives from the same NXP S12X family, and practical design notes drawn from the NXP datasheet and reference manuals - information not found on any single distributor listing.

Permintaan RFG Kontak

S912XEG128J2MAL

S912XEG128J2MAL - 16-bit S12X MCU 128KB Flash 50MHz | NXP

The NXP Semiconductors S912XEG128J2MAL is a 16-bit HCS12X microcontroller featuring an S12X CPU core running at 50 MHz bus speed, 128 KB of embedded Flash, and 16 KB of RAM, housed in a 112-pin LQFP (20x20 mm) package. It is AEC-Q100 qualified and rated for the -40 C to +125 C automotive temperature range, with a supply range of 1.8 V / 2.8 V / 5 V. An HCS12X microcontroller is a 16-bit automotive MCU built on Freescale/NXP's enhanced S12 architecture with the XGATE peripheral co-processor that offloads interrupt-driven tasks from the main CPU. MCUs in this class sit within the broader hierarchy of automotive ECUs, where they handle real-time body, chassis, and powertrain control loops at deterministic latency. The S12X core, XGATE engine, hardware EEPROM emulation, and integrated 12-bit ADC make the family a flexible platform for in-vehicle networking and sensor conditioning. Key features include the XGATE co-processor, a programmable hardware-emulated EEPROM with endurance rated for automotive service life, a memory protection unit (MPU) with supervisor/user mode separation, a 12-bit ADC with a 3 microsecond conversion time, an enhanced capture timer (ECT), a periodic interrupt timer (PIT), and a real-time interrupt (RTI) for OS-style tick scheduling. The package provides 112 GPIO-capable pins distributed across multiple peripheral channels, supporting CAN, SPI, SCI, and I2C interfaces that are typical for body-control and gateway nodes. Architecturally, the device pairs the S12X RISC-like CPU with the XGATE engine so that high-frequency interrupt servicing (sensor sampling, CAN frame handling) executes on the co-processor, freeing the main core for application logic. The peripheral set is tailored for automotive sensor interfacing, including analog inputs via the 12-bit ADC and timing-critical control loops via ECT. Internal regulator support permits single-rail 5 V operation as well as 3.3 V and 1.8 V platforms commonly used in modern body ECUs. Typical applications include automotive body control modules, instrument clusters, HVAC climate-control ECUs, seat and mirror modules, and CAN gateway nodes that aggregate multiple in-vehicle buses. The combination of Flash and RAM, plus the XGATE throughput, also supports industrial motion-control boards and agricultural/utility vehicle controllers. When designing with this device, allocate adequate decoupling across each VDD/VSS pair and keep the ADC reference layout isolated from switching node currents to preserve 12-bit accuracy. Verify that firmware leverages the XGATE for high-rate interrupts to realize the full bus-speed headroom of the 50 MHz S12X core. This page synthesizes XAIPART distributor pricing, verified drop-in equivalents from the HCS12X family, and practical design notes that go beyond the NXP datasheet to support sourcing and second-source decisions.

Permintaan RFG Kontak

S912XEG128J2VAAR

S912XEG128J2VAAR - 16-bit 50MHz 128KB Flash MCU | NXP | Automotive

The NXP S912XEG128J2VAAR is a 16-bit HCS12X microcontroller (MCU) delivering 50 MHz core performance with 128 KB of on-chip Flash program memory and 80-pin QFP (14x14 mm) packaging, qualified for automotive temperature grades (-40°C to +105°C). Built on the S12X core architecture, this device combines a 16-bit data path with peripheral co-processors for deterministic CAN, SCI, SPI, I²C, and PWM control, and integrates 59 general-purpose I/O pins for mixed-signal body electronics. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash/ROM), working memory (RAM), and configurable peripherals such as timers, communication interfaces, and analog blocks. Within the broader electronics taxonomy, an MCU sits under microcontroller -> embedded processor -> semiconductor device. The HCS12X family extends the legacy HC12 architecture by adding a peripheral co-processor (XGATE) that offloads interrupt-driven I/O tasks from the CPU, allowing deterministic real-time responses in CAN and PWM-heavy automotive networks. Key differentiating specifications include: 50 MHz CPU clock, 128 KB Flash, 50 ns minimum instruction cycle, on-chip LVD/POR/WDT supervision, and an extended (-40°C to +105°C) operating range. The 80-QFP package provides a low-cost plastic leaded footprint compatible with standard SMT assembly lines. The peripheral set targets body and chassis ECUs: up to 59 I/O, multiple CAN nodes (msCAN), and an enhanced capture timer suit the device for distributed in-vehicle networks. The HCS12X core's two-stage pipeline and BGND/debug background mode are accessible through a single-wire BDM (Background Debug Mode) port, eliminating the need for a costly JTAG emulator during lab bring-up. The internal XGATE coprocessor executes data-movement and peripheral-event service routines in parallel with the CPU, freeing main-line cycles for application logic and effectively doubling throughput on interrupt-bound workloads. Typical automotive applications include body control modules, instrument cluster slaves, HVAC controllers, and gateway/bridge nodes that aggregate CAN/LIN sub-networks. Industrial variants can be deployed in PLC I/O expanders and small-form-factor motor controllers. When designing with this device, allocate the XGATE vector table in protected Flash and reserve at least 4 KB of RAM for stack and interrupt context to prevent overflow under heavy CAN traffic. Use the internal regulated 2.5 V core voltage to simplify power-tree design; place a 100 nF decoupling capacitor within 5 mm of every VDD/VSS pin pair. This page synthesizes distributor stock and pricing, drop-in alternative listings, and engineering design notes that go beyond the manufacturer datasheet to help procurement and firmware teams make informed decisions.

Permintaan RFG Kontak

S912XEG256J2CAL

S912XEG256J2CAL - 16-Bit HCS12X MCU 256KB Flash 112-LQFP | NXP

The NXP S912XEG256J2CAL is a 16-bit HCS12X-family microcontroller integrating the S12X CPU core with an XGATE co-processor, 256KB of on-chip Flash, 16KB of hardware-emulated EEPROM, and 12KB of RAM, all housed in a 112-pin LQFP (20x20 mm) package. It runs at a 50 MHz bus speed, supports 91 general-purpose I/O lines, and is rated for an industrial operating temperature range of -40C to +85C. A 16-bit microcontroller (MCU) is a class of embedded processor that uses a 16-bit data path, instruction word, and register width, giving a balanced trade-off between 8-bit simplicity and 32-bit computational power. Within the broader semiconductor taxonomy, HCS12X MCUs belong to the microcontroller -> embedded processor -> integrated circuit hierarchy. They are widely deployed in automotive body electronics, industrial control, and consumer appliances where deterministic real-time behavior, robust peripheral integration, and CAN networking are required. Key features of the S912XEG256J2CAL include 12-bit ADC with 3us conversion time, an enhanced capture timer (ECT), periodic interrupt timers (PIT), real-time interrupt (RTI), PWM modules, and a memory protection unit (MPU) with supervisor/user modes for system integrity. Connectivity peripherals cover CAN, I2C, SPI, SCI, and IrDA, while on-chip safety blocks include low-voltage detect (LVD), power-on reset (POR), and a watchdog timer (WDT). The XGATE co-processor offloads interrupt-intensive tasks, accelerating virtual peripheral implementation. Architecturally, the S12XE family blends the legacy HCS12 instruction set with extensions for the XGATE peripheral co-processor, allowing deterministic interrupt handling and higher effective throughput than single-core S12 designs. Its 1.8V internal core regulator with I/O at 3.3V or 5V tolerant I/O simplifies mixed-voltage interfacing. Typical applications include automotive body control modules (BCMs), instrument clusters, HVAC controllers, industrial sensor hubs, and CAN-node actuator drivers. Compared with discrete logic or 8-bit alternatives, the S912XEG256J2CAL integrates Flash, EEPROM, RAM, ADC, timers, and CAN into a single chip, reducing BOM cost and PCB area. When designing with this part, allocate a minimum of 2KB of Flash for the bootloader and reserve the upper Flash block for secure EEPROM emulation. Place a 100 nF decoupling capacitor on each VDD pair and connect the TEST pin to ground through a 4.7 kohm pull-down during normal operation. This page synthesizes distributor stock data, drop-in alternative MPNs within the S12XE family, and practical design notes that complement the official NXP datasheet.

Permintaan RFG Kontak

S912XEG384AVAGR

S912XEG384AVAGR - 16-Bit 50MHz 384KB Flash MCU | NXP

The NXP Semiconductors S912XEG384AVAGR is an automotive-qualified 16-bit S12X microcontroller operating at 50 MHz, with 384 KB of flash memory and a 144-pin LQFP package measuring 20 x 20 mm. Its specified operating-temperature range is -40°C to +105°C, making it suitable for embedded automotive and industrial control systems requiring deterministic control, automotive qualification, and substantial on-chip program memory. A microcontroller is a programmable semiconductor system that integrates a CPU core, memory, peripherals, and input/output interfaces on one device. The S12X belongs to the HCS12X 16-bit MCU family within the broader embedded-processing hierarchy: MCU, microprocessor, semiconductor, and electronic component. Its role is to execute application software, acquire sensor data, control actuators, and coordinate communication and timing functions in real-time embedded systems. Verified features include an XGATE coprocessor, programmable hardware-emulated EEPROM, memory protection and supervisor/user modes, a 12-bit ADC with a stated 3 µs conversion time, an enhanced capture timer, a periodic interrupt timer, and a real-time interrupt timer. These resources support mixed control and signal-processing tasks while reducing the need for external peripheral devices. The S12X CPU operates at 50 MHz with a 50 MHz bus speed, according to the verified product information. The device provides 384 KB, represented as 384K x 8, of flash memory. Arrow additionally lists operating-voltage values of 1.8 V, 2.8 V, and 5 V, while distributor records identify the device as automotive AEC-Q100 qualified. Exact RAM, EEPROM, peripheral-channel counts, and detailed electrical limits were not included in the supplied data and require confirmation from the manufacturer datasheet. Typical uses include body or chassis electronics, motor and valve control, instrument-cluster functions, sensor acquisition, automotive communication gateways, and industrial embedded controllers. The 144-pin LQFP provides a high pin count for mixed analog, digital, communication, and external-memory interfaces, although the exact signal mapping must be checked against the package drawing. When designing around this MCU, verify voltage-domain compatibility, oscillator and reset circuitry, decoupling, programming configuration, unused-pin handling, and AEC-Q100 qualification for the complete production design. The verified distributor references show an observed price from $9.0744 at LCSC and availability at LCSC, Micro-Semiconductor, and DigiKey, but complete quantity-tier pricing was not supplied. This page consolidates verified distributor data, the official NXP product listing, practical automotive-control considerations, and a conservative replacement assessment without treating electrically similar but unverified MCUs as drop-in parts.

Permintaan RFG Kontak

S912XEG384BCAG

S912XEG384BCAG - 16-bit S12X MCU 384KB Flash 50MHz | NXP

The NXP S912XEG384BCAG is a 16-bit HCS12X microcontroller with a 50 MHz S12X CPU, 384 KB flash, and an XGATE co-processor, housed in a 144-pin LQFP (20x20 mm) package. It is automotive qualified and rated for -40 C to +85 C operation. The device integrates 12-bit ADC, ECT, PIT, and RTI peripherals for real-time control. A microcontroller (MCU) is a single-chip computer that combines a CPU core, non-volatile program memory, RAM, and peripheral interfaces on one die. The S12X core sits within NXP's HCS12X family, which extends the classic HCS12 architecture with a parallel XGATE co-processor and a memory protection unit, positioning it between simple 8-bit MCUs and 32-bit automotive controllers in the embedded processing hierarchy. Key features include 384 KB of flash program memory, a 50 MHz bus-speed S12X CPU, and the XGATE co-processor that offloads interrupt-driven tasks to build virtual peripherals and boost overall throughput. A flexible, programmable, hardware-emulated EEPROM supports data-logging without external memory. System integrity is reinforced by a memory protection unit plus supervisor and user operating modes, and the 12-bit ADC delivers 3 us conversion time for fast control loops. The S12X architecture uses a dual-core arrangement in which the main CPU and XGATE run concurrently from shared flash, allowing time-critical ISR handling to be delegated while the CPU executes application code. On-chip emulated EEPROM is implemented in flash with hardware wear-leveling, eliminating the cost and board space of an external serial EEPROM. Typical applications include automotive body control modules, motor control and inverter drives, industrial automation nodes, and instrumentation requiring deterministic interrupt latency. The 144-pin LQFP provides ample GPIO for multi-channel actuator and sensor interfaces. When designing with this device, reserve the emulated EEPROM sector and verify flash programming timing against the NXP reference manual, since EEPROM emulation shares the flash array with program code. This page synthesizes distributor availability, drop-in alternatives, and practical design notes that are not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

S912XEG384BVALR

S912XEG384BVALR - 16-bit S12X MCU 384KB Flash 50MHz | NXP

The NXP S912XEG384BVALR is a 16-bit HCS12X family microcontroller with 384 KB of Flash program memory, 50 MHz CPU clock, and 112-pin LQFP (20 mm x 20 mm) package. According to NXP product page data, the device integrates the enhanced S12X core with XGATE co-processor architecture, supporting automotive-grade ambient operation from -40 °C to +105 °C and is qualified for in-vehicle body, chassis, and network applications. What is a 16-bit CISC microcontroller? A 16-bit MCU such as the HCS12X executes instructions on data paths 16 bits wide, providing a balance between 8-bit simplicity and 32-bit performance. MCUs sit beneath microprocessors in the computing hierarchy: MCU -> microcontroller -> embedded controller -> semiconductor. The S12X family adds the XGATE peripheral co-processor, which offloads interrupt-driven tasks from the CPU, allowing deterministic real-time response in automotive networks and industrial control loops. Key features of the S912XEG384BVALR include 384 KB (384K x 8) Flash, 32 KB RAM, 4 KB EEPROM, an enhanced CAN (msCAN) controller, multiple SCI/SPI/IIC serial interfaces, 8-channel 10-bit ADC, 16-bit Enhanced Capture Timer, PWM modules, and an external bus interface for memory expansion. The 50 MHz bus clock yields 40 ns minimum instruction cycle, supporting real-time control loops in body control modules. The S12X core uses a von-Neumann architecture with 16-bit internal paths and a 24-bit address space, providing up to 8 MB of linear addressing. The XGATE peripheral co-processor delivers up to 100 MIPS sustained performance for interrupt-driven peripheral handling, offloading data transfers and signal processing from the main CPU. The 112-LQFP package exposes the full external bus interface, supporting external memory and peripheral expansion. Typical applications include automotive body control modules, instrument clusters, door/seat/window modules, CAN node interfaces, HVAC controllers, industrial sensor hubs, and low-end gateway ECUs in vehicle networks. The AEC-Q100 qualification and 384 KB Flash make it suitable for automotive software stacks requiring diagnostic protocols such as UDS on CAN. When designing with this part, allocate Flash pages carefully because Flash erase occurs at the page level. Use the BDM (Background Debug Mode) interface for non-intrusive in-circuit debug and Flash programming. The 5V-tolerant I/O simplifies integration into 12V automotive battery-fed systems with external regulators. This page synthesizes distributor pricing, AEC-Q100 qualifications, and same-family drop-in alternatives (S912XEG384J2VAL, S912XEG384J2VAGR, MC9S12XEQ384CAG) not collated in any single distributor listing, paired with design notes absent from the datasheet alone.

Permintaan RFG Kontak

S912XEG384F0CAL

S912XEG384F0CAL - 16-Bit 50MHz 384KB MCU | NXP

The NXP S912XEG384F0CAL is a 16-bit HCS12X microcontroller with a 50 MHz S12X core, 384 KB of flash memory, 24 KB of RAM, 4 KB of data EEPROM, and a 112-LQFP package rated from -40°C to +85°C. It also supports automotive-qualified variants in the same device family, making it suitable for embedded control systems requiring deterministic performance, extensive memory, and a broad peripheral set. A microcontroller is a programmable semiconductor device that integrates a CPU core, memory, and peripherals into one embedded system component. The HCS12X architecture combines the main S12X processor with an XGATE co-processor, which assists with building virtual peripherals and boosting overall processing performance. The part belongs to the microcontroller hierarchy and provides a platform for motor control, automotive electronics, industrial automation, communications, and safety-oriented embedded applications. The S12X CPU operates at up to 50 MHz and provides a 16-bit architecture. Program storage is 384 KB of flash, while data memory includes 24 KB of RAM and 4 KB of EEPROM according to the distributor and product-search information supplied. The device also includes a 12-bit ADC with a stated 3 μs conversion time, an enhanced capture timer, periodic interrupt timer, and real-time interrupt. Its memory-protection and supervisor/user-mode features support system integrity requirements. The S912XEG384F0CAL is identified as an automotive-qualified family variant in distributor listings, while the ordering suffix and package details must be confirmed against the official NXP datasheet before production release. Its 112-LQFP package exposes the device’s extensive signal set in a surface-mount format. The operating range is -40°C to +85°C, making the part suitable for industrial and embedded environments requiring operation across extended temperature conditions. Typical applications include automotive body and chassis electronics, industrial motor controllers, instrumentation, communications equipment, and real-time embedded control. The ADC supports analog sensing, while the timer peripherals support periodic events, input capture, and deterministic control loops. The XGATE co-processor can off suitable processing workloads and assist with virtual peripheral implementation, helping the system respond to concurrent tasks. Designers should confirm the exact pinout, electrical limits, memory map, peripheral availability, and automotive qualification details from the NXP datasheet for the exact ordering code. Decoupling, oscillator layout, reset circuitry, programming access, and unused-pin handling should follow the manufacturer’s reference guidance. This page combines verified distributor specifications, sourcing context, and engineering guidance for evaluating the S912XEG384F0CAL in embedded systems.

Permintaan RFG Kontak

S912XEG384F1CAA

S912XEG384F1CAA - 16-Bit 50MHz 384KB MCU | NXP | Automotive

NXP Semiconductors S912XEG384F1CAA is a 16-bit HCS12X microcontroller operating at 50 MHz, with 384 KB of Flash memory and an 80-pin QFP package. The device supports an operating temperature range of -40°C to +85°C and is identified by the verified product data as automotive qualified. Its S12X core and XGATE coprocessor architecture target embedded control applications requiring deterministic performance, on-chip memory, and integrated peripherals. A microcontroller is a semiconductor device that executes embedded firmware and coordinates digital control, measurement, communication, and timing functions. The S12X family combines a 16-bit CPU, bus-oriented peripherals, and hardware safety mechanisms in a compact embedded platform. The XGATE coprocessor can assist with peripheral-style processing, allowing the main CPU to focus on control tasks and improving overall system throughput when firmware is properly partitioned. Key verified features include a 50 MHz S12X CPU, 384 KB Flash, a 12-bit ADC with a 3 microsecond conversion time, enhanced capture timer, periodic interrupt timer, real-time interrupt support, a memory protection unit, supervisor and user modes, and flexible programmable hardware-emulated EEPROM. The combination of 384 KB Flash and automotive qualification supports firmware-heavy automotive and industrial-control platforms, while the integrated ADC enables direct analog signal acquisition. The S912XEG384F1CAA is packaged in an 80-lead QFP measuring 14 mm by 14 mm according to the verified distributor description. Its gull-wing lead form suits conventional through-hole assembly and provides accessible package leads for inspection and rework. The -40°C to +85°C industrial temperature range covers demanding embedded environments, although the final design must verify all electrical and timing limits against the manufacturer datasheet. Typical applications include automotive body and chassis control modules, actuator controllers, sensor-interface systems, industrial automation equipment, and embedded motor-control platforms. The ADC can sample analog sensor inputs, while the timer peripherals support precise event handling and periodic control tasks. System designers should preserve memory-protection separation, validate watchdog and reset behavior, and confirm peripheral pin multiplexing before final PCB release. For a new design, choose this MCU when the required pin count, Flash capacity, temperature range, S12X software ecosystem, and 80-pin QFP footprint match the product requirements. Because this is a legacy automotive embedded platform, confirm current lifecycle, sourcing, and software-tool support with NXP before committing to a production program. This page combines verified distributor data, manufacturer information, cross-reference results, and engineering-oriented selection guidance.

Permintaan RFG Kontak

S912XEG384F1VAG

S912XEG384F1VAG - 16-bit S12X MCU 384KB Flash | NXP | 144-LQFP

The NXP S912XEG384F1VAG is a 16-bit HCS12X microcontroller with a 50 MHz S12X CPU core, 384 KB of embedded Flash, and an integrated XGATE co-processor, housed in a 144-pin LQFP (20x20 mm) package. It targets automotive body, chassis, and industrial real-time control where deterministic interrupt handling and rich analog/digital peripherals are required. The -F1 speed grade runs the bus at 50 MHz, while the -V operating range supports 1.8V to 5.5V core/logic supply. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and peripheral interfaces. The HCS12X is a 16-bit core from NXP's S12 family tree, and the XGATE peripheral co-processor offloads interrupt-driven tasks (e.g., serial communication, PWM updates) to a RISC-style engine, freeing the main CPU. Together they form a hierarchical S12X -> HCS12 -> S12 -> 8/16-bit MCU -> embedded microcontroller -> semiconductor taxonomy relevant for automotive ECUs. Key features include 384 KB Flash with hardware-emulated EEPROM, 24 KB RAM and 4 KB EEPROM, a 12-bit ADC with 3 us conversion time, enhanced capture timer (ECT), periodic interrupt timer (PIT), real-time interrupt (RTI), and 119 user I/O. Connectivity peripherals include CANbus, SCI, SPI, I2C, and IrDA. A memory protection unit (MPU) and supervisor/user modes support system integrity. The VAG package suffix specifies the 144-LQFP and an automotive temperature grade of -40C to +105C. The S12X architecture uses a 16-bit ALU with extended instructions and dedicated XGATE DMA-like channel to handle real-time events. Flash read-while-write capability allows live firmware updates. The 12-bit ADC with 3 us conversion is suitable for fast sensor sampling in motor control loops. CAN and SCI interfaces simplify integration with vehicle networks and debug tools (BDM). Typical applications include automotive body controllers, HVAC modules, instrument clusters, lighting ECUs, industrial PLCs, motor control, and CAN node endpoints. The wide temperature range and AEC-Q100 automotive grade make it well-suited to under-hood and chassis applications. Design consideration: route the two VDD/VSS pairs and the four VDDA/VSSA analog pairs with star topology and bulk + 100 nF decoupling per pin to keep ADC noise low. Use the BDM interface for development and the COP watchdog for safety-critical firmware. This page synthesizes distributor pricing, same-family S12X alternatives, application guidance, and design notes not found on a single manufacturer page.

Permintaan RFG Kontak

S912XEG384J2CAL

S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)

The NXP Semiconductors S912XEG384J2CAL is a 16-bit HCS12X-family microcontroller featuring 384 KB of on-chip Flash, 24 KB of SRAM, and an integrated XGATE co-processor, housed in a 112-pin LQFP package (20x20 mm). It is built around the S12X CPU core running up to 50 MHz, with the XGATE peripheral co-processor offloading interrupt-driven tasks, making it well suited to automotive body controllers and industrial real-time applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X family extends the classic HCS12 architecture by adding the XGATE RISC co-processor, which executes interrupt service routines in parallel to the main S12X core, allowing deterministic sub-microsecond response times without taxing the CPU. Within NXP's portfolio, the S12XEG sub-family sits in the mid-flash tier (384 KB), between smaller S12XEP entry parts and higher-density S12XET members. Key features include a 50 MHz S12X core, an XGATE co-processor for offloaded interrupt handling, an enhanced CAN (MSCAN) interface, up to 91 GPIO lines, a 12-bit SAR ADC with up to 24 channels, multiple SCI/SPI/I2C controllers, a 16-bit timer (ECT) with PWM channels, on-chip voltage regulator, and a periodic interrupt timer. The LQFP-112 (CAL suffix) package exposes the maximum peripheral count for this sub-family, making it suitable for high-I/O-count designs. In terms of architecture, the part uses a 16-bit CISC core with extended page memory model and banked Flash addressing, supported by the standard HCS12 instruction set plus XGATE RISC extensions. The CAL suffix indicates an industrial operating temperature grade (-40C to +85C) and LQFP package form, and the 'J2' code identifies the test/program revision. Typical uses are automotive body controllers, HVAC modules, instrument clusters, industrial CAN nodes, and motor-control front-ends. Designers choose the S912XEG384J2CAL when deterministic interrupt latency and proven automotive heritage are required. Ensure proper decoupling (100 nF plus 4.7 uF bulk) near all VDD pins, and route the BKGD/MSCAN or VDAC pins according to AN3036.

Permintaan RFG Kontak

S912XEG384J2CALR

S912XEG384J2CALR - 16-bit HCS12X MCU, 384KB Flash | NXP

The NXP Semiconductors S912XEG384J2CALR is a 16-bit HCS12X-family microcontroller featuring 384 KB of on-chip Flash, 24 KB of SRAM, and an integrated XGATE co-processor, housed in a 112-pin LQFP package (20x20 mm). It is built around the S12X CPU core running up to 50 MHz, with the XGATE peripheral co-processor offloading interrupt-driven tasks, making it well suited to automotive body controllers and industrial real-time applications. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), working memory (RAM), and a rich set of peripherals such as timers, ADCs, communication controllers, and GPIO. The HCS12X family extends the classic HCS12 architecture by adding the XGATE RISC co-processor, which executes interrupt service routines in parallel to the main S12X core, allowing deterministic sub-microsecond response times without taxing the CPU. Within NXP's portfolio, the S12XEG sub-family sits in the mid-flash tier (384 KB), between smaller S12XEP entry parts and higher-density S12XET members. Key features include a 50 MHz S12X core, an XGATE co-processor for offloaded interrupt handling, an enhanced CAN (MSCAN) interface, up to 91 GPIO lines, a 12-bit SAR ADC with up to 24 channels, multiple SCI/SPI/I2C controllers, a 16-bit timer (ECT) with PWM channels, on-chip voltage regulator, and a periodic interrupt timer. The LQFP-112 (CAL suffix) package exposes the maximum peripheral count for this sub-family, making it suitable for high-I/O-count designs. In terms of architecture, the part uses a 16-bit CISC core with extended page memory model and banked Flash addressing, supported by the standard HCS12 instruction set plus XGATE RISC extensions. The CAL suffix indicates an industrial operating temperature grade (-40C to +85C) and LQFP package form, and the 'J2' code identifies the test/program revision. Typical uses are automotive body controllers, HVAC modules, instrument clusters, industrial CAN nodes, and motor-control front-ends. Designers choose the S912XEG384J2CALR when deterministic interrupt latency and proven automotive heritage are required. Ensure proper decoupling (100 nF plus 4.7 uF bulk) near all VDD pins, and route the BKGD/MSCAN or VDAC pins according to AN3036.

Permintaan RFG Kontak

S912XEG384J2VAL

S912XEG384J2VAL - 16-bit 50MHz 384KB Flash MCU | NXP

The NXP S912XEG384J2VAL is a 16-bit HCS12X automotive-qualified microcontroller with 384KB Flash, a 50MHz S12X bus clock, and a 12-bit ADC, housed in a 112-pin LQFP (20x20 mm) package. A 16-bit MCU of this class combines a CISC processor core, on-chip nonvolatile memory, analog peripherals and communication interfaces in a single chip, sitting within the microcontroller hierarchy between simple 8-bit MCUs and 32-bit automotive processors. NXP's HCS12X family is a direct descendant of the widely deployed HC12/S12 architecture, making it a mainstay of body, chassis and powertrain electronics. Key features include the XGATE co-processor, which offloads interrupt handling and I/O routines to effectively build virtual peripherals and multiply overall system throughput. A flexible, programmable hardware-emulated EEPROM in Flash eliminates the need for a separate EEPROM device. A memory protection unit with supervisor and user modes supports system integrity for safety-oriented designs. Technical depth: the S12X CPU runs at 50MHz bus speed, and the enhanced ADC achieves 12-bit resolution with a 3 microsecond conversion time. Peripheral set includes the Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real Time Interrupt (RTI), SCI serial interfaces, and an integrated temperature sensor. Supply options cover 1.8V, 2.8V and 5V domains per distribution listings, with operation from -40C to +105C for automotive environments. Typical applications include automotive body control modules, gateway nodes, instrument clusters and industrial control systems that require high Flash density plus deterministic 16-bit real-time behavior. Design consideration: since NXP marks this part No Longer Manufactured, new designs should evaluate lifecycle risk and plan a last-time-buy or map to a successor before committing to new PCB layouts. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

S912XEG384J3CAGR

S912XEG384J3CAGR - 384KB Flash S12X MCU, 50MHz, LQFP-144 | NXP

The NXP Semiconductors / Freescale S912XEG384J3CAGR is a 16-bit HCS12X family microcontroller featuring an S12X CPU core, 384KB of on-chip Flash, 50MHz maximum bus frequency, and an LQFP-144 (LFQFP) package with gull-wing leads. The device operates from a 1.8V supply, supports an industrial -40C to +85C temperature grade, and integrates peripherals including SPI, a watchdog timer, and an oscillator subsystem for automotive-grade embedded designs. What is an HCS12X microcontroller? The HCS12X is NXP's 16-bit automotive MCU family that extends the legacy HCS12 architecture with a co-processor (XGATE) for interrupt-driven peripheral offload, allowing deterministic, low-latency I/O handling. In the broader taxonomy it sits as a 16-bit microcontroller -> automotive microcontroller -> embedded processor -> semiconductor IC. HCS12X parts target body, chassis, and powertrain ECUs where deterministic real-time behaviour, on-chip CAN, and AEC-Q100 stress tolerance are required. Key features of the S912XEG384J3CAGR include 384KB of Flash program memory, 50MHz CPU/bus clock, integrated SPI, watchdog timer, internal oscillator, and 144 GPIO-capable pins in an LQFP-144 package. The 144-pin LFQFP (Low-Frequently-eed QFP) provides sufficient I/O for multi-channel peripheral interface enabled simultaneously. The "G" suffix confirms Pb-free, lead-free, RoHS-compliant assembly. Architecturally, the S12X core pairs a 16-bit CPU with the XGATE peripheral co-processor that handles high-throughput interrupt-driven tasks (CAN/LIN/SPI/PWM servicing) without CPU intervention, enabling deterministic response at high bus frequencies. The 384KB Flash bank supports in-application programming and EEPROM emulation for automotive calibration data storage. Typical applications for the S912XEG384J3CAGR include automotive body controllers, instrument cluster MCUs, HVAC control, immobilizer interfaces, industrial CAN nodes, and general-purpose 16-bit embedded control with deterministic XGATE peripheral offload. The wide LQFP-144 pin count supports multi-bus bridging designs. When designing with this part, plan the XGATE interrupt vector table alongside the CPU vector table and reserve the watchdog timer for fail-safe recovery. The 1.8V core supply rail requires a low-noise source, a 3.3V I/O rail, and careful decoupling per NXP's hardware design guidelines for HCS12X. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

S912XEG384J3CAL

S912XEG384J3CAL - 16-bit MCU, S12X, 384KB Flash | NXP

The NXP Semiconductors S912XEG384J3CAL is a 16-bit HCS12X family microcontroller featuring a CPU12X core running at 50 MHz bus speed with 384KB of on-chip Flash and an integrated XGATE co-processor, housed in a 112-pin LQFP (20x20 mm) package rated from -40C to +85C. This device belongs to the S12XE family of 16-bit microcontrollers, an evolution of the HCS12 architecture. An MCU (microcontroller unit) is an integrated circuit that combines a CPU, memory, and programmable peripherals on a single silicon die. The 16-bit S12X core sits within the broader hierarchy: MCU -> 16-bit microcontroller -> automotive microcontroller -> embedded processor -> semiconductor. The XGATE peripheral co-processor accelerates interrupt-driven tasks and emulates peripherals in hardware, offloading the main CPU and improving real-time response for vehicle networks and body controllers. Key differentiating features include hardware-emulated EEPROM that eliminates external storage chips, a 12-bit ADC with 3 microsecond conversion time suitable for sensor signal acquisition, an Enhanced Capture Timer (ECT) for precise event timing, a Periodic Interrupt Timer (PIT) and Real-Time Interrupt (RTI) for OS scheduling, and a Memory Protection Unit (MPU) supporting supervisor/user modes for system integrity. The device targets industrial and automotive-grade environments. Typical applications include automotive body controllers, CAN/J1850 gateway modules, industrial sensor hubs, HVAC control units, and instrument clusters. The 384KB Flash and rich peripheral mix also make it suitable for LIN/CAN nodes and motor-control slaves in distributed vehicle networks. When designing with this MCU, place 0.1 uF decoupling capacitors as close as possible to each VDD/VSS pair, route the oscillator pins over a continuous ground plane, and configure the XGATE interrupt vector table before enabling XGATE requests. 5V-tolerant inputs simplify connection to legacy automotive sensors. This page synthesizes XAIPART distributor pricing, drop-in pin-compatible alternatives, and practical PCB design notes not typically consolidated on a single manufacturer datasheet page.

Permintaan RFG Kontak

S912XEG384J3CALR

S912XEG384J3CALR - 16-Bit 50MHz 384KB MCU | NXP

The NXP Semiconductors S912XEG384J3CALR is a 16-bit S12X microcontroller operating at 50 MHz, with 384 KB of flash memory in a 112-LQFP 20 x 20 mm package. According to the verified distributor data, it is automotive qualified and rated for -40°C to +85°C operation. An S12X microcontroller is a 16-bit embedded-control processor within the HCS12 microcontroller family. It combines a 50 MHz CPU with integrated flash memory, analog conversion, timing peripherals, and communication interfaces for automotive and industrial control systems. The S12X architecture provides a platform suitable for motor control, body electronics, instrumentation, and other embedded applications. Verified features include an XGATE co-processor for building virtual peripherals and improving overall performance, programmable hardware-emulated EEPROM, a memory protection unit, supervisor and user modes, a 12-bit ADC with 3 μs conversion time, an enhanced capture timer, a periodic interrupt timer, and a real-time interrupt timer. These peripherals support deterministic control, signal acquisition, timing, and system protection. The S912XEG384J3CALR combines 384 KB of flash with a 50 MHz operating frequency and a 112-LQFP package. Its automotive-qualified designation makes it suitable for applications requiring a broad industrial temperature range, although the exact qualification scope and lifecycle status must be confirmed from current NXP documentation. The R suffix identifies the ordering variant supplied in the verified data. Typical applications include electronic throttle and engine-control subsystems, body and powertrain control modules, actuator controllers, automotive instrumentation, motor-control electronics, and industrial embedded controllers. The combination of on-chip flash, conversion resources, timing peripherals, and security-oriented system integrity features reduces the need for external components in compact control designs. When designing around this device, verify its complete pinout, power-supply requirements, clock configuration, peripheral multiplexing, memory map, and programming requirements against the current NXP datasheet before releasing a PCB or firmware. The supplied search data confirms the core identity, package, frequency, memory size, temperature range, and automotive qualification, but does not provide every electrical or pin-level parameter.

Permintaan RFG Kontak

S912XEG384J3VAA

S912XEG384J3VAA - 16-Bit 50MHz S12X MCU | NXP | Automotive

The NXP Semiconductors S912XEG384J3VAA is a 16-bit S12X automotive-qualified microcontroller operating at 50 MHz, with 384 KB of Flash and a -40°C to +105°C temperature range, housed in an 80-pin QFP 14 x 14 mm package. It combines an HCS12X microcontroller core with an XGATE coprocessor, a 12-bit ADC, and hardware memory-protection features for robust embedded control applications. What is an S12X microcontroller? An S12X microcontroller is a 16-bit embedded-control semiconductor that integrates CPU peripherals, Flash program memory, RAM, analog conversion, timers, communication interfaces, and protective supervision functions. The S12X family belongs to the HCS12 embedded-processing hierarchy and is designed for automotive and industrial systems requiring deterministic real-time behavior, mixed-signal measurement, and high system integrity. Key verified features include a 50 MHz S12X CPU, 384 KB of programmable Flash, an XGATE coprocessor for virtual-peripheral workloads, and a 12-bit ADC with a stated 3 µs conversion time. The memory protection unit and supervisor/user modes help isolate critical tasks and restrict unauthorized access, while programmable hardware-emulated EEPROM supports flexible nonvolatile data storage. The device also provides an Enhanced Capture Timer, Periodic Interrupt Timer, and Real Time Interrupt for event-driven and scheduled control. Its 80-QFP package offers 80 externally accessible leads, making it suitable for designs that need broad peripheral connectivity and straightforward inspection or rework. The operating range of -40°C to +105°C supports harsh automotive environments, although the exact automotive qualification designation beyond the verified description is not expanded here. Typical uses include vehicle body and chassis control modules, motor and actuator controllers, sensor acquisition systems, automotive gateway logic, and industrial embedded controllers. The 12-bit ADC supports analog sensor interfaces, while the XGATE can off suitable background processing from the main CPU. Designs should verify signal levels, timing, unused pins, decoupling, and qualification requirements directly against the manufacturer datasheet before production release. A key design consideration is that the 50 MHz CPU rate does not remove real-time constraints: peripheral clocking, interrupt latency, bus contention, and memory wait-state behavior still require deterministic scheduling. For PCB implementation, place decoupling close to supply pins, route sensitive analog inputs away from fast digital transitions, and preserve the package pin assignments and land pattern shown in the official documentation. This page consolidates verified distributor and manufacturer information, lifecycle status, package details, commercial availability signals, and engineering-oriented design guidance. It is intended to help engineers identify whether the S912XEG384J3VAA fits an automotive embedded-control design before requesting manufacturer documentation and production sourcing.

Permintaan RFG Kontak

S912XEG384J3VAGR

S912XEG384J3VAGR - 16-bit MCU, 384KB Flash, 50MHz, LQFP-144 | NXP

The NXP S912XEG384J3VAGR is a 16-bit HCS12X microcontroller featuring 384KB of Flash, 32KB of RAM, an integrated XGATE co-processor, and a 50 MHz CPU core, housed in a 144-pin LQFP package (20x20mm). It targets automotive and industrial applications with enhanced peripheral integration. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, program memory (Flash), data memory (RAM), and a rich set of peripherals including timers, ADC channels, communication controllers (CAN, SPI, SCI), and GPIO. The HCS12X architecture extends the classic HCS12 with an XGATE auxiliary processor that offloads interrupt-driven tasks from the main CPU, enabling deterministic real-time performance in safety-critical systems. Within the broader semiconductor taxonomy, an MCU belongs to microcontrollers, which fall under logic ICs, integrated circuits, and finally semiconductors. The S912XEG384J3VAGR includes 384KB of on-chip Flash (384K x 8), 4KB of EEPROM for non-volatile data storage, and 32KB of RAM. It supports up to 8 CAN 2.0 A/B controllers, multiple SCI/SPI/I2C interfaces, an 8-channel 10-bit ADC, and a PWM module suitable for motor control. The integrated XGATE RISC co-processor executes interrupt service routines without CPU intervention, freeing the main S12X core for application logic. The part operates from a 5V supply (with internal 3.3V and 2.5V regulators), supports -40C to +105C industrial grade temperatures, and is qualified for automotive use. Its BDM (Background Debug Mode) interface and on-chip single-wire debugging simplify firmware development and in-field programming. Typical applications include automotive body controllers, instrument clusters, HVAC modules, industrial CAN nodes, and motor control systems. The combination of large Flash, XGATE, and CAN density makes it ideal for gateway modules that bridge multiple in-vehicle networks. When designing with this MCU, careful PCB layout is required for the 50 MHz CPU, with particular attention to decoupling, oscillator placement, and LQFP-144 thermal performance. The BDM header must remain accessible for programming and debug. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the NXP datasheet.

Permintaan RFG Kontak

S912XEG384J3VALR

S912XEG384J3VALR - 16-Bit 50MHz 384KB MCU | NXP

The NXP Semiconductors S912XEG384J3VALR is a 16-bit HCS12X microcontroller with a 50 MHz core, 384 KB of flash memory, and a 112-pin LQFP package measuring 20 x 20 mm. It is rated for operation from -40°C to +105°C and is identified by the verified distributor data as automotive qualified. A microcontroller is a programmable integrated circuit that executes firmware, coordinates hardware peripherals, and provides the central control function for embedded equipment. The HCS12X family belongs to the broader hierarchy of embedded processors, microcontrollers, semiconductors, and electronic control systems. This part combines real-time control capability with substantial on-chip flash in a package designed for higher-pin-count automotive and industrial electronics. Key verified features include a 16-bit CPU, the S12X core, 384 KB of flash, a 50 MHz operating frequency, and a -40°C to +105°C temperature range. The distributor records also identify the device as automotive qualified and list SPI connectivity. These characteristics suit applications requiring embedded control, serial communication, monitoring, diagnostics, and general-purpose peripheral coordination. The S912XEG384J3VALR is identified as an HCS12X MCU and is listed in a 112-LQFP configuration. Its high pin count provides a substantial external interface for power, ground, communications, timers, interrupts, and other embedded-control functions. Exact peripheral allocation, memory organization, electrical limits, and pin-level signal names must be confirmed in the manufacturer datasheet before a board design is released. Typical uses include automotive body and chassis control modules, industrial controllers, communication equipment, sensor hubs, and compact embedded control platforms. The -40°C to +105°C range and automotive qualification make the device relevant to temperature-variable environments, while 384 KB of flash provides room for a more substantial embedded program than many smaller 8-bit or low-memory MCUs. Designers should verify supply voltage, clock requirements, multiplexing, unused-pin treatment, programming, watchdog behavior, and decoupling directly against the NXP datasheet. Do not infer pin functions or peripheral availability from distributor summaries alone, because the provided web data does not include a complete pinout or electrical characteristic table.

Permintaan RFG Kontak

S912XEP100BMAL

S912XEP100BMAL - 16-Bit S12X MCU, 1MB Flash, 50MHz | NXP

The NXP S912XEP100BMAL is a 16-bit HCS12X family microcontroller built on the S12X CPU core running at 50 MHz bus speed, integrating 1 MB of on-chip Flash (1M x 8) in a 112-pin LQFP (20x20) package. It targets automotive-grade applications with an operating temperature range of -40C to +125C and includes an XGATE co-processor for offloading interrupt-driven virtual peripherals, freeing the main CPU for application logic. The device integrates 1 MB Flash, configurable EEPROM emulation, and supports supervisor/user modes with a memory protection unit. A microcontroller (MCU) is a single-chip computer that combines a CPU core, program memory (Flash/ROM), working memory (RAM), and a rich set of on-chip peripherals such as timers, ADCs, communication interfaces, and GPIO. The HCS12X family extends the classic S12 architecture with enhanced interrupt handling, a co-processor channel, and increased address space. MCUs sit at the heart of embedded systems, sitting below SoCs in complexity but above discrete logic in capability, and they form the broadest category in the Integrated Circuits > Microcontrollers segment. Key features include a 12-bit ADC with 3 us conversion time, an Enhanced Capture Timer (ECT), Periodic Interrupt Timer (PIT), Real-Time Interrupt (RTI), and multiple serial interfaces (SCI, SPI, I2C, CAN). The XGATE peripheral channel executes virtual peripherals at up to 100 MHz equivalent throughput, allowing deterministic interrupt response under heavy I/O load. Hardware emulation of EEPROM using Flash sectors removes the need for an external EEPROM in most designs. The S12XCPU core uses a CISC instruction set with 16-bit ALU, 20-bit ALU extensions, and BDM/SPI-based debug. A memory protection unit enforces supervisor/user privilege separation, and the system clock synthesizer supports both PLL and limp-home modes for fail-safe automotive operation. The 112-pin LQFP exposes up to 91 GPIO pins across ports A, B, E, K, T, S, M, P, H, J, and AD, depending on peripheral multiplexing. Typical applications include automotive body control modules, body controllers, lighting controllers, gateway ECUs, and industrial automation nodes. The combination of CAN, large Flash, and -40C to +125C qualification makes it well suited for chassis and powertrain adjacent ECUs in vehicles. The hardware EEPROM emulation also reduces BOM cost in node ECUs that store calibration data. When designing with this MCU, plan for a stable 4 MHz to 16 MHz crystal reference; the internal PLL multiplies to 50 MHz bus. Ensure the BDM connector is accessible for firmware development. Watchdog timer configuration must be enabled early in the bring-up to prevent runaway code in production. Use NXP's CodeWarrior or S32 Design Studio toolchains for development. This page synthesizes distributor pricing, qualified drop-in alternatives within the S12X family, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference for selecting the S912XEP100BMAL.

Permintaan RFG Kontak

S912XEP100J2VAL

S912XEP100J2VAL - 16-bit HCS12X MCU, 1MB Flash, 50MHz | NXP

The NXP (Freescale) S912XEP100J2VAL is a 16-bit HCS12X (S12X) microcontroller with a 50 MHz bus capability, 1 MB (1M x 8) on-chip Flash, and 64 KB of RAM, housed in a 112-pin LQFP (20 x 20 mm) surface-mount package. A microcontroller (MCU) is a single-chip computer that integrates a processor core, memory, and peripherals into one package, sitting at the heart of embedded systems within the broader hierarchy of semiconductors -> integrated circuits -> microcontrollers. The S12X family extended the classic HCS12 architecture with an enhanced XGATE co-processor module, which offloads interrupt handling and communication tasks from the main CPU, effectively doubling real-world throughput for I/O-heavy applications. Key features of the S912XEP100J2VAL include its 1 MB Flash array for large application code, 64 KB RAM for buffers and data logging, dual power supply support (3.3 V / 5 V per distributor data), and industrial temperature grading. The device integrates CAN, SCI, and SPI serial interfaces plus a 16-channel timer module and 10-bit ADC typical of the S12XEP subfamily, making it well suited to in-vehicle networking nodes. Architecturally, the S12X core maintains object-code compatibility with the HC11 and HCS12 generations, allowing legacy code migration while adding 24-bit addressing, enhanced indexing, and the XGATE RISC co-processor clocked at up to 50 MHz. Typical applications include automotive body electronics, gateways and dashboards, industrial control systems, and motor management units where CAN networking and deterministic 16-bit control are required. Design consideration: the EP memory-density variant shares a common S12X pinout within its package family, but Flash size and package pin count must be re-verified against the datasheet before any board reuse. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

Subkategori

Produk (38.000+)

S912XEG128J1CAL - 16-Bit 128KB MCU, 112-LQFP | NXP

S912XEG128J1MAA - 16-bit HCS12X MCU 128KB Flash QFP-80 | NXP

S912XEG128J2CALR - 16-bit S12X MCU 128KB Flash | NXP | LQFP-112

S912XEG128J2MAAR - 16-bit HCS12X MCU 128KB Flash | NXP

S912XEG128J2MAL - 16-bit S12X MCU 128KB Flash 50MHz | NXP

S912XEG128J2VAAR - 16-bit 50MHz 128KB Flash MCU | NXP | Automotive

S912XEG256J2CAL - 16-Bit HCS12X MCU 256KB Flash 112-LQFP | NXP

S912XEG384AVAGR - 16-Bit 50MHz 384KB Flash MCU | NXP

S912XEG384BCAG - 16-bit S12X MCU 384KB Flash 50MHz | NXP

S912XEG384BVALR - 16-bit S12X MCU 384KB Flash 50MHz | NXP

S912XEG384F0CAL - 16-Bit 50MHz 384KB MCU | NXP

S912XEG384F1CAA - 16-Bit 50MHz 384KB MCU | NXP | Automotive

S912XEG384F1VAG - 16-bit S12X MCU 384KB Flash | NXP | 144-LQFP

S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)

S912XEG384J2CALR - 16-bit HCS12X MCU, 384KB Flash | NXP

S912XEG384J2VAL - 16-bit 50MHz 384KB Flash MCU | NXP

S912XEG384J3CAGR - 384KB Flash S12X MCU, 50MHz, LQFP-144 | NXP

S912XEG384J3CAL - 16-bit MCU, S12X, 384KB Flash | NXP

S912XEG384J3CALR - 16-Bit 50MHz 384KB MCU | NXP

S912XEG384J3VAA - 16-Bit 50MHz S12X MCU | NXP | Automotive

S912XEG384J3VAGR - 16-bit MCU, 384KB Flash, 50MHz, LQFP-144 | NXP

S912XEG384J3VALR - 16-Bit 50MHz 384KB MCU | NXP

S912XEP100BMAL - 16-Bit S12X MCU, 1MB Flash, 50MHz | NXP

S912XEP100J2VAL - 16-bit HCS12X MCU, 1MB Flash, 50MHz | NXP