Produk (44.000+)

XC3090L-8PC84I - XC3000 FPGA 6K Gates 320 Cells 80MHz | Xilinx
XC3090L-8PC84I

XC3090L-8PC84I - XC3000 FPGA 6K Gates 320 Cells 80MHz | Xilinx

The Xilinx XC3090L-8PC84I is a member of the XC3000 family of Field Programmable Gate Arrays (FPGAs), offered in an 84-pin Plastic Leaded Chip Carrier (PLCC) package with J-lead terminations. The device contains 6,000 usable gates organized into 320 Configurable Logic Blocks (CLBs), supported by 64,160 configuration program-store bits, and operates at a maximum toggle frequency of 80 MHz from a 3.3 V core supply. The "L" suffix denotes the low-voltage 3.3 V variant of the original 5 V XC3090, and the "I" suffix indicates the industrial operating temperature grade of -40 °C to +85 °C. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit built around an array of configurable logic blocks, programmable interconnect, and programmable I/O blocks, all of which are defined by a user-loaded configuration bitstream. FPGAs sit at the top of the programmable logic hierarchy, above simple PLDs and CPLDs, and are used as flexible digital platforms ranging from glue logic and bus interfacing to complete processor cores and signal-processing pipelines. The XC3000 series, introduced by Xilinx in the late 1980s, was the company's first commercially successful FPGA family and established the SRAM-based configuration architecture that subsequent generations continued to use. Key features of the XC3090L-8PC84I include 70 user I/O pins distributed around the perimeter, an internal configuration program store that holds the user-defined logic, and per-IOB input-threshold programmability so that each I/O can be configured for TTL or CMOS compatible external signaling. The global input buffer threshold, plus per-pin output drive controls, allow direct interfacing with mixed-logic voltage domains without external level shifters. The 80 MHz toggle rate and deterministic routing make the part well suited to glue logic, state-machine controllers, and parallel bus interfaces in industrial embedded systems. Architecturally, the device combines a perimeter of I/O Blocks (IOBs), a core matrix of Configurable Logic Blocks (CLBs), and a programmable interconnect network. Each CLB contains a small combinational look-up table, storage, and carry logic, while the IOBs include input threshold detection, output drivers, and registers. Configuration is loaded into the on-chip SRAM program store at power-up from an external PROM or microprocessor, which means the design is volatile and must be reloaded after every power cycle - a defining characteristic of the XC3000 family and a key consideration when selecting this part for new designs. Typical applications for the XC3090L-8PC84I include legacy industrial-control boards, telecommunications line cards, test-and-measurement fixtures, and digital glue logic on custom hardware where it replaces discrete TTL or 4000-series CMOS. Because it is a mature, widely understood device with abundant reference designs, it is also used by engineers maintaining long-lifecycle systems in factory automation and military/aerospace subsystems where re-qualification of newer FPGAs would be prohibitively expensive. Designers should be aware that the XC3000 family has been End-of-Life for many years, and active new designs are generally not supported by current Xilinx/AMD Vivado toolchains. When designing in this part, allow for configuration time at power-up (the bitstream must be loaded from an external source), provide proper decoupling on the 3.3 V supply, and respect the 84-pin PLCC J-lead land pattern exactly - the package is not pin-compatible with modern leadless FPGA packages. If a long-term or new design is being started, evaluate Spartan-6, Spartan-7, or MAX II/10 CPLD families as migration paths with HDL portability, while preserving the XC3090L-8PC84I for existing maintenance. This page synthesizes distributor pricing, drop-in same-package alternatives from the XC3000 family, and practical design notes not consolidated on the manufacturer datasheet alone.

Permintaan RFG Kontak
XC3090L-8PCG84C - 84-Pin PLCC FPGA | Xilinx XC3000 Family
XC3090L-8PCG84C

XC3090L-8PCG84C - 84-Pin PLCC FPGA | Xilinx XC3000 Family

The AMD/Xilinx XC3090L-8PCG84C is a member of the XC3000A/L series of Field Programmable Gate Arrays (FPGAs) housed in an 84-pin Plastic Leaded Chip Carrier (PLCC, J-Lead) package. The device integrates approximately 70 Configurable Logic Blocks (CLBs) and 64,160 bits of configuration program store (often referred to as 6,400 gates), with 70 user I/O pins available on the 84-pin PLCC footprint. An FPGA (Field Programmable Gate Array) is a type of programmable logic device (PLD) that combines the high integration density of a gate array with user-defined configuration stored in on-chip SRAM. Within the broader component taxonomy, the XC3090L belongs to: FPGA -> programmable logic device -> logic IC -> integrated circuit -> semiconductor. The XC3000 family pioneered the use of a perimeter of I/O Blocks (IOBs), a core array of CLBs, and dedicated interconnect resources, an architecture that remains the conceptual ancestor of every modern SRAM-based FPGA. The XC3090L is the low-voltage ('L' suffix) variant of the XC3090, optimized for 3.3V operation to reduce power consumption versus the original 5V XC3090. The '-8' speed grade indicates a moderate performance tier within the family, and 'PCG84C' denotes the 84-pin Plastic Leaded Chip Carrier (PLCC) package with commercial temperature rating (0C to +70C). The device also provides built-in configuration logic supporting serial and parallel master/slave modes, plus boundary-scan testability via JTAG/IEEE 1149.1. The architecture comprises a symmetrical array of CLBs surrounded by programmable IOBs. Each CLB contains a combinatorial logic section, two flip-flops, and routing resources, while each IOB supports a wide range of input/output standards. Distributed throughout the die are 3-state buffers and on-chip wide-edge decoders that allow the implementation of wide AND-OR-INVERT gates directly in silicon. Typical applications include glue logic replacement, legacy industrial control, telecom interface boards, and educational/prototyping systems that target the classic Xilinx XC3000 design flow. The 84-pin PLCC package is socket-friendly and is therefore favored for through-hole prototype boards and field-upgradeable modules. The device is supported by the legacy XACT and early ISE Foundation toolchains. When designing with the XC3090L-8PCG84C, ensure that the 3.3V low-voltage supply rail is decoupled close to the device and that configuration mode pins (M0, M1, M2) are tied to the proper levels for the chosen programming source. Boundary-scan and readback features are particularly valuable for in-system verification on telecom and industrial boards. This part is now considered legacy/last-time-buy by Xilinx and is widely available only through aftermarket distributors.

Permintaan RFG Kontak
XC3090L-8PCG84I - XC3000L FPGA 6K Gates 84-PLCC | Xilinx
XC3090L-8PCG84I

XC3090L-8PCG84I - XC3000L FPGA 6K Gates 84-PLCC | Xilinx

The Xilinx XC3090L-8PCG84I is a member of the XC3000L Low-Voltage Field Programmable Gate Array family, delivering 6,000 usable gates, 320 configurable logic blocks (CLBs), and 70 user I/O pins in a 3.3 V, 84-pin PLCC package. It operates with a maximum toggle rate of approximately 80 MHz and is offered in an industrial-grade temperature rating (the 'I' suffix) for designs that must survive -40 °C to +85 °C ambient conditions. The '8' speed grade places it in the higher-performance segment of the XC3000L family, while the 'L' designation identifies it as the low-voltage 3.3 V variant rather than the 5 V XC3000/XC3100 line. The 84-pin PLCC footprint (package code PCG84) uses a J-leaded ceramic-compatible plastic carrier suitable for through-hole PCB assembly, and the device is supported by the legacy Xilinx XC3000 design flow including the XACT development system. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit containing an array of configurable logic blocks, programmable interconnect, and configurable I/O cells that the user programs after manufacture to implement custom VLSI design tasks. Within the power management and digital logic hierarchy, an FPGA sits above fixed-function Application-Specific Integrated Circuits (ASICs) and below software-defined processors; it offers hardware-level parallelism, hardware-timed determinism, and reconfigurability that distinguishes it from microcontrollers. The XC3000 generation represents one of the earliest commercially successful SRAM-based FPGA architectures, forming the foundation from which later Xilinx families (XC4000, Spartan, Virtex, and 7-series) were developed. The 'L' low-voltage variant extends that legacy into battery-powered and 3.3 V-only systems where the original XC3000A 5 V supply could not be tolerated. Key features include 6,000 usable gates, 320 CLBs, 70 user I/Os, an 80 MHz toggle rate, and 3.3 V single-supply operation. A perimeter of user-programmable I/O blocks (IOBs) supports TTL and CMOS signalling levels, while the on-chip configuration memory retains the user's bitstream in SRAM that is reloaded at every power-up. The architecture is built around three types of configurable elements: IOBs, CLBs, and the programmable interconnect matrix that joins them. Typical applications include custom VLSI prototyping, TTL and MSI logic replacement, glue-logic consolidation on legacy 5 V/3.3 V mixed boards, industrial control glue logic, telecommunications interface adaptation, and educational FPGA lab kits that still depend on the XC3000 development flow. The industrial temperature grade makes it acceptable for factory-floor controllers, outdoor telecom line cards, and ruggedised test fixtures where commercial-grade parts would fail. When designing with the XC3090L-8PCG84I, remember that the configuration bitstream is volatile: the device must be reconfigured from an external EPROM or microcontroller at every power-up. The 84-pin PLCC package leaves only 70 pins available as user I/O, so pin budgeting must account for the dedicated clock, configuration, and boundary-scan pins before committing a logic design. Designers migrating from this part should evaluate modern Xilinx 7-series or Spartan-6 drop-in equivalents, but be aware that the footprint, configuration interface, and tool flow are not bitstream-compatible. This page synthesises distributor pricing, drop-in 84-pin PLCC alternatives within the XC3000L family, comparison data, and practical design notes that are not collated in any single manufacturer datasheet.

Permintaan RFG Kontak
XC3090L-8TQ144C - 320 CLB FPGA, 80MHz, TQFP-144 | Xilinx
XC3090L-8TQ144C

XC3090L-8TQ144C - 320 CLB FPGA, 80MHz, TQFP-144 | Xilinx

The Xilinx XC3090L-8TQ144C is a CMOS Field Programmable Gate Array from the legacy XC3000 family, offering 320 Configurable Logic Blocks (CLBs) and approximately 5000 equivalent gates with a maximum usable gate count of 6000. Housed in a 144-pin Thin Quad Flat Pack (TQFP) package, it operates at system clock rates up to 80 MHz with combinatorial CLB delays as fast as 6.7 ns and guaranteed flip-flop toggle rates between 190 and 370 MHz. The device is rated for a 3.0 V to 3.6 V supply, with 8 mA sink and 8 mA source output drive and quiescent current limited to 5 mA in power-down mode. A Field Programmable Gate Array (FPGA) is a semiconductor device built around an array of programmable logic blocks interconnected by a configurable routing matrix. Within the broader taxonomy, an FPGA sits as a subclass of programmable logic devices alongside CPLDs and falls under the digital IC hierarchy in power management and logic categories. The XC3000 series pioneered SRAM-based configuration and is positioned as the ancestor of all modern Xilinx FPGA families such as Spartan and Virtex. The "L" suffix designates the low-power CMOS process node, while the "-8" speed grade places this die at the high end of the XC3090's 1.55 to 4.1 ns logic-delay range. Key architectural features include 100% pin-out and architecture compatibility across the XC3000A/L and XC3100A/L families, allowing designers to migrate between density points without re-laying-out the board. The device supports JTAG-style boundary-scan testing and uses a distributed RAM/ROM programming model that loads the bitstream from external PROM at power-up. The TQFP-144 footprint exposes roughly 96 to 108 user I/O pins depending on bank configuration, with eight global clock buffers for high-fanout nets. Typical applications include glue-logic replacement in legacy industrial controllers, prototyping platforms for ASIC emulation, and digital signal pre-processing in telecom backplanes. The combination of 5000 gates and 80 MHz system clock is well-suited to state-machine controllers, UART bridges, FIFO address generators, and parallel-to-serial converters that were popular in 1990s-era designs still in long-life service today. When designing with this part, note that configuration requires a serial or parallel EPROM and at least four configuration mode pins. The 5 mA quiescent current makes it acceptable for battery-backed applications, but designers must respect the 3.6 V absolute-maximum supply rating to avoid latch-up. JTAG boundary scan is supported, but in-system reconfiguration requires careful handling of the DONE and INIT pins. This page synthesizes distributor stock and pricing snapshots from DigiKey, Mouser, Octopart and the Xilinx product archive, plus drop-in same-family variants from the XC3000A/L and XC3100A/L families — practical sourcing context not consolidated on any single manufacturer page.

Permintaan RFG Kontak
XC3090L-8TQ144I - 6K-Gate CMOS FPGA, 80 MHz, 144-TQFP | Xilinx
XC3090L-8TQ144I

XC3090L-8TQ144I - 6K-Gate CMOS FPGA, 80 MHz, 144-TQFP | Xilinx

The Xilinx XC3090L-8TQ144I is a CMOS Field Programmable Gate Array from the XC3000L family, delivering 320 Configurable Logic Blocks (CLBs), 6000 maximum usable gates, and a 5000-gate nominal equivalent count in a 144-pin TQFP (TQ144) surface-mount package. The device operates from a 3.3 V supply, supports system clock rates of 50 to 85 MHz, and provides guaranteed flip-flop toggle rates from 190 to 370 MHz with logic delays between 1.55 and 4.1 ns. A Field Programmable Gate Array (FPGA) is a semiconductor integrated circuit composed of an array of programmable logic blocks interconnected by a configurable routing matrix. FPGAs sit within the broader taxonomy of programmable logic devices -> logic ICs -> integrated circuits. The XC3000 series from Xilinx is one of the earliest commercially successful SRAM-based FPGA architectures, predating modern families such as Spartan and Artix, and remains relevant for long-lifecycle industrial, military, and legacy retrofit designs. Key electrical characteristics include 8 mA output sink and source drive capability, a maximum quiescent current of 5 mA during power-down, and full architecture and pin-out compatibility with sibling XC3000A/L and XC3100A/L devices. The 'L' suffix denotes a low-voltage 3.3 V core supply, while the 'I' suffix indicates the industrial -40 C to +85 C operating temperature grade and the '8' speed grade defines the timing bin. Architecturally, the XC3090L uses a symmetrical 22 x 22 CLB matrix with on-chip distributed interconnect, tri-state buffers on every I/O, and dedicated global clock buffers. The device is configured at power-up from an external serial or parallel PROM (e.g., XC1736, XC1765), and configuration bitstreams are identical in pinout across the XC3000L and XC3100L families, easing migration. Typical applications include industrial control glue logic, legacy telecommunications backplane interfaces, test-and-measurement instrumentation, and aerospace retrofits requiring pin-compatible drop-in replacements for end-of-life XC3000 designs. The XC3090L-8TQ144I is well suited to low-to-medium complexity glue logic, bus interfacing, and state-machine control where non-volatility, in-system reprogrammability, and 3.3 V operation are required. When designing with this device, ensure the configuration interface (mode pins M0/M1/M2 and DONE) is properly terminated, and that decoupling includes a 0.1 uF and 10 uF capacitor pair adjacent to every VCC/ground pair. Long-lifecycle users should also note that this part is mature silicon and is best sourced from authorized distributors or franchised brokers with full traceability. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found on the manufacturer datasheet alone.

Permintaan RFG Kontak
XC3090L-8TQ176C - 6K-Gate 80MHz CMOS FPGA | Xilinx TQFP-176
XC3090L-8TQ176C

XC3090L-8TQ176C - 6K-Gate 80MHz CMOS FPGA | Xilinx TQFP-176

The Xilinx XC3090L-8TQ176C is a 5,000-gate (6,000-gate maximum) CMOS Field Programmable Gate Array from the legacy XC3000A/L family, supplied in a 176-pin TQFP package. It features 320 Configurable Logic Blocks (CLBs), operates at a maximum clock frequency of 80 MHz, and is rated for 3.3 V core operation. The 'L' suffix denotes the low-voltage variant; the '8' speed grade corresponds to the slowest timing bin, and '176C' identifies the commercial-temperature TQFP-176 package option. A Field Programmable Gate Array (FPGA) is a semiconductor IC whose logic function and interconnects are defined by configuration data loaded into on-chip static memory. FPGAs sit within the broader hierarchy programmable logic device -> programmable logic -> logic IC -> integrated circuit, and historically served as the fastest path to custom digital logic before modern HDL-based ASIC flows became mainstream. The XC3000 family pioneered SRAM-based configuration, allowing infinite reconfiguration and rapid prototyping cycles that defined early-1990s digital design. Key specifications include 5,000 usable gates (6,000 max), 320 CLBs, 80 MHz maximum toggle frequency, 3.3 V VCC, SRAM-based configuration, JTAG boundary-scan support, and a 0.500 mm pitch TQFP-176 footprint. The device exposes dedicated I/O blocks with programmable pull-ups and output slew-rate control, and it supports multiple configuration modes including master serial, slave serial, and peripheral modes for flexible system boot. Technically, the XC3090L uses a 5 V-tolerant I/O architecture on a 3.3 V core, with CMOS process geometry typical of mid-1990s Xilinx silicon. Each CLB contains a configurable combinatorial logic section plus two flip-flops, with local interconnect feeding the general-purpose routing matrix. The 80 MHz grade represents worst-case pin-to-pin combinatorial delay across the slowest paths, adequate for glue logic, bus interfacing, and state-machine replacement rather than high-throughput DSP. Typical applications include legacy glue-logic replacement, bus-bridge adapters (e.g., ISA-to-local-bus converters), industrial controller front-ends, and educational FPGA platforms where the TQFP-176 footprint is already laid out. The XC3090L is widely used as a pin-compatible replacement target for systems designed around the XC3000 family pinout. When designing, verify that the configuration memory source (EPROM, EEPROM, or microcontroller) matches the selected configuration mode and that the readback/special I/O voltage levels do not exceed the absolute-maximum ratings. Always reference the Xilinx XC3000 family datasheet for full timing parameters. This page consolidates distributor availability, parametric data, drop-in alternatives, and practical design notes that supplement the original Xilinx XC3090L datasheet.

Permintaan RFG Kontak
XC3090L-8TQ176I - 5000 Gates FPGA, 320 CLBs, 80 MHz | Xilinx
XC3090L-8TQ176I

XC3090L-8TQ176I - 5000 Gates FPGA, 320 CLBs, 80 MHz | Xilinx

The Xilinx XC3090L-8TQ176I is a CMOS Field-Programmable Gate Array from the legacy XC3000 series offering 320 Configurable Logic Blocks (CLBs), a maximum of 5000 equivalent gates, and up to 6000 usable gates, housed in a 176-pin TQFP (TQ176) surface-mount package with industrial temperature grading. The device is built on a 0.6 um CMOS process and operates from a single 5V supply with a maximum clock frequency of 80 MHz and a combinatorial CLB delay of 6.7 ns at the -8 speed grade. A Field-Programmable Gate Array (FPGA) is a type of programmable logic device (PLD) that combines a perimeter of user-configurable I/O Blocks (IOBs) with a core array of Configurable Logic Blocks (CLBs) and programmable interconnect, all controlled by an SRAM-based configuration program store. FPGAs sit hierarchically under programmable logic, then digital integrated circuits, and ultimately the broader semiconductor taxonomy; the XC3000 family occupies the early-generation, 5V legacy tier that preceded modern low-power Virtex and Kintex families. Key features include 144 user I/Os in the TQ176 footprint, distributed on-chip RAM, JTAG boundary-scan support, and tri-state buffers per IOB. The architecture supports asynchronous and synchronous design entry through Xilinx's XACT development system, including schematic capture, automatic place-and-route, logic and timing simulation, and interactive design optimization. The -8 speed grade denotes the mid-tier performance bin of the XC3090L family, with faster -9/-10 grades unavailable in this part number and slower -6/-7 grades reserved for cost-sensitive designs. Typical applications include industrial control glue logic, legacy telecom backplane interfaces, military and aerospace retrofit boards, and educational laboratory trainers where designers migrate proven XC3000 designs forward without re-validating timing closure. The wide 5V tolerance and TTL-compatible I/Os also make it suitable for bridging older ASICs to newer microprocessors. When designing with this part, treat the 6.7 ns CLB delay as the budget floor for the slowest logic path: multiply by the number of cascaded CLBs and add interconnect delay to estimate the system clock. Configuration storage is volatile, so external PROMs (XC17xx) are required for standalone boot. This page synthesizes distributor stock, lifecycle status, same-package alternatives, and practical design notes not found in the standalone XC3090L datasheet, designed to assist sourcing engineers working on legacy Xilinx FPGA maintenance and obsolescence mitigation.

Permintaan RFG Kontak
XC3090L-8TQG176C - 320 CLB FPGA, 6K Gates, 80MHz, TQFP-176 | Xilinx
XC3090L-8TQG176C

XC3090L-8TQG176C - 320 CLB FPGA, 6K Gates, 80MHz, TQFP-176 | Xilinx

The Xilinx XC3090L-8TQG176C is a 3.3 V, low-voltage CMOS Field Programmable Gate Array from the Xilinx XC3000L Logic Cell Array family, packaged in a 176-pin Thin Quad Flat Pack (TQFP). It contains 320 Configurable Logic Blocks (CLBs), delivers approximately 5,000 equivalent gates (with up to 6,000 usable gates), and supports system clock rates up to 80 MHz. What is an FPGA? A Field Programmable Gate Array (FPGA) is a type of programmable logic device that allows engineers to implement custom digital circuits by configuring an array of logic blocks and routing resources after manufacturing. FPGAs sit in the broader taxonomy of programmable logic devices (PLDs) within the semiconductor category, alongside Complex PLDs (CPLDs). They differ from CPLDs in architecture: FPGAs use a fine-grained array of look-up tables (LUTs) and SRAM-based configuration memory, offering higher logic density and richer register-rich datapaths, while CPLDs use macrocell-based, non-volatile architectures optimized for glue logic and fast pin-to-pin combinational delays. The Xilinx XC3000L family specifically targets low-voltage (3.3 V), high-volume designs where predictable timing and low power are required. Key features of the XC3090L-8TQG176C include 320 CLBs organized in a symmetric array, on-chip SRAM-based configuration memory (reprogrammable in-system), TTL-compatible I/O, and the -8 speed grade. The -8 speed grade corresponds to a slower timing bin, trading absolute clock frequency for lower cost; faster -6 and -7 bins are also offered in the same family. The device is configured externally from an EEPROM, EPROM, ROM, or disk file, with on-chip initialization logic handling the configuration handshake. Typical applications span legacy industrial control boards, telecommunications glue logic, prototyping of state machines and bus interfaces, and design migration from discrete TTL/CMOS MSI logic to a single programmable device. The TQFP-176 footprint is widely accepted for through-hole-era replacements and older PCI and ISA-style add-in cards where surface-mount assembly is feasible but BGA is not yet adopted. When designing with the XC3090L-8TQG176C, note that the part is in long-term EOL and should be qualified against remaining distributor stock before any new design-in. Designers should verify lead-free reflow compatibility (the original XC3000L family was specified for SnPb process), and confirm configuration mode (serial vs. parallel) against board-level pull-up resistors and DONE/PROG sequencing. This page synthesizes distributor stock levels, drop-in same-package XC3000L variants, and practical obsolescence-management notes not found in the original manufacturer datasheet.

Permintaan RFG Kontak
XC3090L-8TQG176I - 9000 Gates FPGA, 80 MHz, 176-pin LQFP | Xilinx
XC3090L-8TQG176I

XC3090L-8TQG176I - 9000 Gates FPGA, 80 MHz, 176-pin LQFP | Xilinx

The Xilinx XC3090L-8TQG176I is a CMOS Field Programmable Gate Array from the legacy XC3000L low-voltage family, offering approximately 5000 usable gates (up to 9000 equivalent system gates) implemented across 320 Configurable Logic Blocks (CLBs) in a 176-pin TQG/LQFP package. It supports a maximum clock frequency of 80 MHz with a CLB combinatorial delay of 6.7 ns at the -8 speed grade, targeting high-density glue-logic, prototyping, and industrial control applications where ASIC-class integration is not yet justified. What is an FPGA? A Field-Programmable Gate Array is a reconfigurable digital integrated circuit whose logic fabric and interconnect can be programmed by the end user after manufacture. Within the taxonomy of digital ICs, an FPGA sits between an Application-Specific Integrated Circuit (ASIC) and a microcontroller: an ASIC is hard-wired for one function but offers the lowest unit cost at high volume, while an FPGA trades per-unit cost for design flexibility, parallel hardware execution, and rapid time-to-market. The XC3000 family pioneered SRAM-based configuration and the now-universal island-style CLB + IOB + programmable interconnect architecture that defines the modern FPGA. Key features of the XC3090L-8TQG176I include on-chip SRAM-based configuration store, three types of configurable elements (perimeter I/O Blocks, core CLB array, and routing channels), industrial-grade -40C to +85C operating range (I suffix), and the low-voltage L-suffix core that reduces 5V-family power. The device is housed in a 176-terminal LQFP/TQFP package on a 0.5 mm pitch with gull-wing leads suitable for surface-mount assembly and rework. Technically, the XC3000L family uses a 5V-tolerant I/O structure with 3.3V or 5V core options, hierarchical interconnect including long lines, hex lines, and direct connects, and configurable IOBs that support registered, latched, or combinatorial I/O with tri-state control. The architecture integrates a configuration program store so the array can be re-programmed in-system via the standard Xilinx configuration interface. Typical applications span industrial control systems, telecommunications glue logic, prototyping platforms for ASIC emulation, test and measurement fixtures, military/aerospace subsystems, and educational development kits where students learn HDL synthesis on a mature, well-documented device family. The TQG176 package is the highest-density option for this die. When designing with the XC3090L-8TQG176I, note that this device family is mature (introduced in the early-to-mid 1990s), so verify long-term availability and second-source supply before committing new production designs. New designs should weigh migration to the Xilinx CoolRunner-II CPLD or Spartan-6/Spartan-7 FPGA families for active lifecycle status and modern toolchain support. This page synthesizes distributor pricing, XAIPART in-stock tiers, pin-compatible Xilinx drop-in alternatives drawn from the XC3000L family, and practical design notes on configuration, I/O banking, and legacy toolchain compatibility not found in the original datasheet.

Permintaan RFG Kontak
XC3090LTM-100PC84C - 6K Gate, 320-Cell FPGA 5V 84-PLCC | Xilinx
XC3090LTM-100PC84C

XC3090LTM-100PC84C - 6K Gate, 320-Cell FPGA 5V 84-PLCC | Xilinx

The Xilinx XC3090LTM-100PC84C is a CMOS Field Programmable Gate Array (FPGA) from the legacy XC3000 Logic Cell Array family, delivering approximately 6,000 usable gates and 320 Configurable Logic Blocks (CLBs) in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. Operating at 5V CMOS technology with a 100 MHz internal performance grade, the device is rated for commercial temperature conditions and targets low-voltage logic integration where fine-grained parallel logic is required. A Field Programmable Gate Array (FPGA) is a type of programmable logic device that combines the density of gate arrays with the design flexibility of in-system programmability. FPGAs sit at the top of the programmable logic hierarchy (PLD -> CPLD -> FPGA -> SoC FPGA) and are widely used to implement custom digital logic, glue logic, bus interfaces, and parallel datapaths without committing to a masked ASIC. The XC3000 family is the third-generation Xilinx architecture that introduced distributed Configurable Logic Blocks with look-up table-based logic, complemented by a programmable interconnect matrix and I/O blocks. Key features of the XC3090LTM-100PC84C include 320 CLBs, a typical gate count range of 5,000 to 6,000 gates, 100 MHz system performance, and 5V CMOS core technology. The PLCC-84 (PC84) package uses J-lead surface-mount terminals in a square ceramic/plastic body, supporting legacy through-hole-style PCB assembly processes. The XC3000 family pioneered SRAM-based configuration, allowing infinite re-programmability via an external configuration PROM or microcontroller bitstream load. From an architecture perspective, the XC3000L family uses 5V-tolerant I/O buffers, distributed RAM capability in select CLB modes, and a hierarchical interconnect that routes signals between logic blocks with predictable delay. The 'LTM' suffix designates the low-voltage / commercial temperature variant in the XC3000 family. Compared with modern 28nm or 16nm FPGAs, the XC3090LTM-100PC84C delivers modest logic density but remains useful for legacy board retrofits, education platforms, and industrial systems where proven long-life silicon is required. Typical applications include industrial control glue logic, legacy telecommunications interfaces, military and aerospace retrofits (through QML equivalents), educational FPGA training platforms, and digital signal preprocessing where low-cost parallel logic suffices. The 84-pin PLCC footprint is socket-compatible with the broader XC3000/XC3100/XC3300 84-pin PLCC family, simplifying board reuse across multiple design generations. When designing with this device, ensure proper configuration circuitry is included - the SRAM-based XC3000 family requires a configuration bitstream at every power-up. Plan for 5V supply decoupling, and verify I/O voltage compatibility with downstream CMOS or TTL peripherals. Engineers targeting new designs should consider the device's NRND/EOL status and confirm lifetime-buy availability for production runs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, providing a single reference for engineers evaluating the XC3090LTM-100PC84C for both new designs and legacy support scenarios.

Permintaan RFG Kontak
XC3090LTM-125PC84C - 5000 Gates XC3000L FPGA, 125MHz, PLCC-84 | Xilinx
XC3090LTM-125PC84C

XC3090LTM-125PC84C - 5000 Gates XC3000L FPGA, 125MHz, PLCC-84 | Xilinx

The Xilinx XC3090LTM-125PC84C is a 5000-gate, 125 MHz Field Programmable Gate Array (FPGA) from the legacy XC3000L Low-Voltage Logic Cell Array family, housed in an 84-pin Plastic Leaded Chip Carrier (PLCC-84) package. It delivers approximately 5000 equivalent gates, 320 Configurable Logic Blocks (CLBs), and 928 flip-flops, with a maximum clock frequency of 125 MHz. The 'L' suffix denotes the low-voltage 3.3 V core variant, and 'TM' indicates the commercial plastic-leaded chip carrier package grade. An FPGA (Field Programmable Gate Array) is a programmable logic device that lets engineers implement arbitrary digital logic functions using an array of configurable logic blocks (CLBs) interconnected by a programmable routing matrix. Within the broader semiconductor taxonomy, an FPGA belongs to programmable logic devices (PLDs), which sit between fixed-function ASICs and discrete logic ICs in flexibility and integration. The XC3000L family was Xilinx's third-generation low-voltage FPGA line, succeeding the original XC3000 by operating from 3.0 V to 3.6 V supplies instead of 5 V, enabling lower power consumption for portable and battery-powered designs of the 1990s. Key features include 320 CLBs, 928 flip-flops, 138 user I/Os, 4.75 V to 5.25 V supply range for the I/O bank, an internal 3.3 V core, and a 125 MHz maximum toggle/clock frequency. The device supports JTAG-based boundary-scan testing, on-chip configuration memory, and tri-state output buffers per I/O. The PLCC-84 through-hole package provides robust mechanical mounting suitable for industrial and legacy equipment designs. Technically, the XC3090LTM-125PC84C uses SRAM-based configuration cells, meaning the bitstream must be loaded from an external ROM or microcontroller at every power-up. This volatile configuration enables unlimited re-programming cycles in the field, but requires a separate configuration PROM such as the XC1736 or compatible serial-loader device. The architecture implements a symmetrical array of CLBs surrounded by perimeter I/O blocks (IOBs), which was the industry-standard FPGA floorplan of that era. Typical applications include industrial control logic, telecom interface glue logic, legacy peripheral adapters, and test-and-measurement custom instrumentation. The wide I/O count (138) supports parallel buses and high-pin-count glue-logic designs. When designing with this FPGA, allocate at least 4 clock-pad pins for global clock distribution and ensure the configuration PROM timing aligns with the XC3090LTM power-on reset sequence. For new designs, consider migrating to a modern Xilinx 7-series or Spartan-6 device, since the XC3000L family is no longer recommended for new designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
XC3090LTM-8PC84C - XC3000L FPGA, 6K Gates, 84-PLCC | Xilinx
XC3090LTM-8PC84C

XC3090LTM-8PC84C - XC3000L FPGA, 6K Gates, 84-PLCC | Xilinx

The Xilinx XC3090LTM-8PC84C is a member of the legacy XC3000L Low Voltage Logic Cell Array family, delivering approximately 6,000 usable gates in an 84-pin Plastic Leaded Chip Carrier (PLCC) package. The device is built on a 0.8-micron CMOS SRAM-based architecture and operates from a 3.0 V to 3.6 V core supply, with the "L" suffix designating low-voltage operation relative to the original 5 V XC3000 series. The "TM" suffix indicates a specific speed/grade combination within the XC3000L family. A Field Programmable Gate Array (FPGA) is a semiconductor device containing an array of configurable logic blocks (CLBs), programmable interconnects, and programmable I/O cells. The user-defined logic function is loaded into on-chip static memory cells from an external boot source such as an EEPROM, EPROM, ROM, or microprocessor. Once configured, the FPGA behaves as a dedicated custom digital circuit. The XC3000 family was Xilinx's pioneering commercial FPGA line, establishing the FPGA architecture still dominant in the industry today, and the XC3000L variant extends that architecture to lower-voltage 3.3 V systems where power dissipation is a primary concern. Key features of the XC3090LTM-8PC84C include approximately 320 Configurable Logic Blocks (CLBs), 64,160 bits of distributed configuration memory, and an 84-pin PLCC package with J-lead surface-mount terminations. The device supports in-system configuration via the Xilinx XC3000 configuration bitstream and is footprint-compatible with other XC3090L members that share the PC84 pinout. Logic delays are typically in the 5-10 ns range, sufficient for moderate-speed glue logic, bus interfacing, state-machine implementation, and small processor prototyping on 3.3 V rails. Typical applications include legacy 3.3 V digital glue logic replacement, prototype ASIC emulation, custom peripheral interfacing for microcontrollers, parallel bus arbitration, and industrial control subsystems where 5 V FPGAs are no longer acceptable. The 84-PLCC package also supports through-hole and socket-based prototyping, which is convenient for engineering development and low-volume production. Designers should note that the XC3000L family is legacy silicon - the Xilinx WebPACK and modern Vivado tools do not support these devices. Programming requires the legacy XACT or older Foundation toolchains, and configuration bitstreams generated for XC4000, Spartan, or 7-series FPGAs are incompatible. Engineers maintaining legacy systems should verify the configuration PROM and toolchain availability before committing to new designs.

Permintaan RFG Kontak
XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA
XC3S1000-4FG320C

XC3S1000-4FG320C - 1M Spartan-3 FPGA | AMD | 320-FBGA

The AMD XC3S1000-4FG320C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, 221 user I/O, and a 320-FBGA surface-mount package. The -4 speed grade and 1.2 V nominal core supply make it a high-density programmable-logic option for industrial control, telecommunications, instrumentation, and embedded video systems. A field-programmable gate array is a semiconductor device whose digital logic, interconnect, and I/O behavior are defined by a configuration bitstream rather than a fixed circuit mask. An FPGA belongs to the programmable-logic hierarchy alongside CPLDs, combines millions of equivalent gates with configurable memory and I/O blocks, and operates as a reconfigurable digital subsystem within a larger embedded system. The Spartan-3 architecture provides 1,920 logic cells organized as configurable logic blocks, along with 442,368 RAM bits for on-chip data storage and distributed memory. Its 221 user I/O support high-speed interface logic, while the 19 x 19 mm 320-FBGA package keeps a one-million-gate design compact. The core operates from 1.14 V to 1.26 V, and the listed operating junction-temperature range is 0°C to 85°C. The -4 ordering code identifies a defined speed grade within the Spartan-3 performance range. A listing for this exact family identifies a 630 MHz performance figure, 90 nm process technology, and 1.2 V core operation. These characteristics suit parallel data capture, protocol bridging, general control logic, and multi-channel digital processing rather than high-throughput processor software workloads. Typical deployments include industrial automation controllers, telecom line-interface equipment, test and measurement instruments, high-speed data-acquisition systems, and embedded displays. Because the device combines substantial logic, dedicated block RAM, and 221 I/O in one package, it can consolidate several discrete logic devices into one configurable implementation while preserving hardware-level timing control. PCB design should account for the BGA escape-routing requirement, power-plane integrity, and the device's substantial dynamic current demand. Use the pin-description table, recommended decoupling network, and package-specific land pattern in the AMD Spartan-3 family documentation. Confirm the configuration interface, bank supply requirements, and unused-ball treatment before releasing the layout for fabrication. This page adds engineering-focused comparison data, drop-in variant guidance, design notes, and application-specific reasoning that are not arranged in the same form in the manufacturer family datasheet. It is intended to help designers confirm package compatibility, resource adequacy, speed grade, and thermal expectations before integrating the FPGA into a new board.

Permintaan RFG Kontak
XC3S1000-4FG456C - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FG456C

XC3S1000-4FG456C - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 333 user I/Os in a 456-ball FG456 BGA package. It operates with a 1.2 V FPGA core and belongs to the -4 speed grade. The device is listed as obsolete, making it primarily relevant to maintenance, repair, and previously designed embedded systems rather than new-volume production. A field-programmable gate array, or FPGA, is a reconfigurable digital semiconductor that combines programmable logic blocks, programmable I/O, and internal routing resources. Within the semiconductor hierarchy, an FPGA belongs to the programmable-logic family and is used to implement control logic, signal processing, communications, and hardware acceleration. Unlike a fixed-function application-specific integrated circuit, an FPGA permits its configuration bitstream to be changed without changing the PCB. The XC3S1000 provides 17,280 logic cells and 333 user I/Os, making it suitable for designs that need substantially more external connectivity than smaller Spartan devices. Its 456-ball FG456 package also exposes numerous power, configuration, clock, and general-purpose I/O balls. The -4 suffix identifies its factory speed grade, while the C suffix identifies the commercial-grade ordering option. The Spartan-3 architecture integrates programmable logic, dedicated block RAM, dedicated multipliers, digital clock managers, and programmable I/O resources into a single FPGA. This permits a single device to combine parallel datapath processing, control functions, and external interfaces. Engineers can implement multiple finite-state machines, arithmetic pipelines, protocol engines, and peripheral controllers while retaining the flexibility of field-updated configuration bitstreams. Typical uses include industrial control, data-acquisition equipment, communications infrastructure, embedded video processing, and legacy interface adapters. The large 333-I/O count is particularly useful when a design must connect external memories, converters, transceivers, and control peripherals while minimizing external glue logic. A design migrating to a newer FPGA should still be timing-closed and functionally revalidated because device resources and electrical characteristics are not interchangeable merely because the logic function is similar. For implementation, use the Spartan-3 pinout and configuration guidelines in the manufacturer datasheet when assigning the 456 package balls, selecting I/O standards, and planning the power and ground connections. Check the device status before new design release, because an obsolete lifecycle designation means new sourcing and long-term continuity require explicit planning rather than assumption. This page consolidates the available device identification, lifecycle, package, and cross-reference information into an engineering-oriented resource. It also identifies same-footprint speed-grade and temperature-grade alternatives, helping designers distinguish true board-level replacements from parts that require different packages, layouts, or redesigns.

Permintaan RFG Kontak
XC3S1000-4FG456I - 1M-Gate Spartan-3 FPGA | AMD Xilinx
XC3S1000-4FG456I

XC3S1000-4FG456I - 1M-Gate Spartan-3 FPGA | AMD Xilinx

The AMD Xilinx XC3S1000-4FG456I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 333 user I/Os, supplied in a 456-ball FBGA package. The device operates from a 1.2 V core supply, with a specified operating range of 1.14 V to 1.26 V, and is built on a 90 nm FPGA process. An FPGA is a programmable semiconductor containing configurable logic blocks, programmable interconnect, block RAM, dedicated input/output resources, and embedded processor capabilities. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, combining substantial logic density with a large pin count and a fine-pitch ball-grid-array footprint for cost-sensitive embedded systems. Key features include 1,920 configurable logic blocks, 432 kbit of embedded memory, a listed maximum clock frequency of 630 MHz, and a listed 333 I/O count. The FG456 designation identifies the 456-ball package, while the -4 speed grade places the device in a performance grade suitable for general-purpose control, processing, and interface logic. The industrial temperature option supports operation across a -40°C to 100°C junction-temperature range. The Spartan-3 architecture uses programmable logic and routing resources to implement digital functions that would otherwise require several conventional ASICs. Its 17,280 logic cells provide substantial parallel processing capability, while the 442,368 RAM bits allow data buffering, lookup tables, packet storage, and embedded-memory designs. With 333 available I/Os, the device can support substantial external connectivity while conserving board area through the 23 mm by 23 mm FBGA package. Typical uses include industrial control systems, network-interface controllers, instrumentation, embedded processor subsystems, video-processing pipelines, and telecommunications equipment. Designers can implement parallel data paths, protocol bridges, and control logic, or combine programmable logic with soft processor cores for system-on-programmable-logic designs. PCB implementation requires careful power delivery and escape routing because the FBGA package exposes fine-pitch balls beneath the device. Follow the manufacturer’s pinout and package-design guidance for ball assignment, power and ground distribution, decoupling, and signal escape. Confirm that the selected speed grade and temperature grade match the operating environment before releasing the production design. This page combines device specifications, package details, sourcing guidance, equivalent-device information, and practical implementation considerations to support faster FPGA selection and board bring-up.

Permintaan RFG Kontak
XC3S1000-4FG676C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-4FG676C

XC3S1000-4FG676C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-4FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic elements, 391 user I/Os, and a 1.2 V operating supply in a 676-ball BGA package. The -4 suffix identifies its performance grade, while the commercial temperature designation supports designs operating from 0°C to 85°C. A field-programmable gate array is a semiconductor whose digital logic, interconnections, and I/O behavior are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic blocks with programmable routing resources. It replaces many fixed-function gate arrays when design changes, field upgrades, or moderate logic density are required. The XC3S1000 provides 391 user I/Os in a 676-ball package, giving it substantially more interface capacity than smaller Spartan-3 devices. Its 17,280 logic elements provide a practical implementation target for control logic, interface bridging, data acquisition, embedded protocol handling, and general-purpose parallel processing. The 676-ball package also supports a high pin count for designs that need multiple external buses and mixed-speed peripherals. The XC3S1000 belongs to the Spartan-3 generation, whose architecture combines configurable logic blocks, distributed and block RAM, dedicated digital signal processing resources, programmable I/O blocks, and programmable interconnect. The manufacturer documentation identifies the family as the DS099 Spartan-3 FPGA data sheet. The -4 performance grade should be checked against the timing constraints of the selected clock, I/O standard, and logic path. Typical uses include industrial automation, test equipment, communications interfaces, embedded control, video timing, and general digital signal processing. Its 391 I/Os are useful for parallel sensor acquisition, while the logic resources can implement protocol state machines, data pipelines, and control functions. The commercial temperature range makes it appropriate for indoor commercial and industrial equipment when the enclosure temperature remains within 0°C to 85°C. PCB implementation requires careful attention to the 676-ball land pattern, power distribution, decoupling, and high-speed routing. Place power and ground planes according to the manufacturer's pinout and layout guidance, and route clocks, memories, and other high-speed interfaces with controlled impedance and short return paths. Confirm the assembled board against the exact package drawings before releasing fabrication data. This product page organizes the key Spartan-3 device facts, commercially relevant ordering information, pin-compatible replacement options, comparison data, and practical PCB considerations. It is intended to accelerate initial component selection while preserving the need to validate timing, power integrity, thermal performance, and lifecycle requirements for the finished system.

Permintaan RFG Kontak
XC3S1000-4FG676I - 1M Gate Spartan-3 FPGA | AMD/Xilinx
XC3S1000-4FG676I

XC3S1000-4FG676I - 1M Gate Spartan-3 FPGA | AMD/Xilinx

AMD/Xilinx XC3S1000-4FG676I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 442,368 logic cells, 17,280 slices, and 391 user I/O, packaged in a 676-ball fine-pitch ball grid array. The device operates from a 1.14 V minimum supply, uses 1.2 V core technology, and is built on a 90 nm process. An FPGA is a programmable-logic semiconductor whose configurable logic blocks, programmable input/output blocks, embedded resources, and routing fabric can be configured after manufacture. Within the semiconductor hierarchy, the XC3S1000 belongs to the FPGA and CPLD family, specifically the Spartan-3 low-cost logic-device series. Unlike a fixed-function application-specific integrated circuit, an FPGA can implement multiple digital functions in one device and can be reprogrammed for design revisions, prototypes, and product variations. The principal device characteristics are 630 MHz advertised operating speed, 442,368 logic cells organized into 17,280 slices, 1,000,000 system gates, and 391 user I/O. Its 676-ball FBGA package provides a large, fine-pitch connection interface suitable for systems requiring substantial external connectivity. The -4 speed designation identifies one of the device's supported performance grades, while the I suffix identifies the industrial ordering variant. Spartan-3 devices combine configurable logic with dedicated arithmetic, block RAM, and digital signal processing resources. These resources allow parallel datapaths, embedded memories, state machines, communication interfaces, and control logic to be consolidated into a single programmable component. The architecture is useful when a design must evolve faster than an application-specific ASIC mask set or when field updates are required after deployment. Typical uses include industrial control, communications equipment, instrumentation, embedded test systems, video processing, and general-purpose digital prototyping. The 391 I/O count can support external memory, data converters, network transceivers, clocks, and displays, although a complete design must account for bank-specific supply requirements, dedicated configuration pins, and I/O-standard constraints. PCB implementation requires a fine-pitch 676-ball BGA footprint, careful power and ground distribution, and controlled-impedance routing. Configuration storage, decoupling, clocking, and JTAG access must also be planned according to the Spartan-3 configuration and power-architecture guidance. The large BGA also complicates prototype assembly and inspection. This page organizes the verified electrical, logical, packaging, and sourcing characteristics of the XC3S1000-4FG676I, compares same-footprint Spartan-3 speed and temperature-grade variants, and provides practical guidance for migration, power planning, BGA layout, configuration, and system integration.

Permintaan RFG Kontak
XC3S1000-4FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-4FT256C

XC3S1000-4FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-4FT256C is a 1 million system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 173 I/O pins, and a 630 MHz device rating. It operates from a 1.2 V core supply and is packaged in a 256-ball FT256 ball-grid-array package. The device is manufactured using 90 nm CMOS technology. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, interfaces, and signal-processing functions are configured after manufacture. In the product hierarchy, an FPGA belongs to programmable logic, which includes application-specific integrated circuits, complex programmable logic devices, and field-programmable gate arrays. The Spartan-3 architecture combines configurable logic blocks, programmable I/O, block RAM, dedicated multipliers, and clock-management resources to implement control logic, communication interfaces, and embedded signal processing. The XC3S1000-4FT256C provides 17,280 logic cells for designs requiring moderate-to-high logic density. Its 173 I/O positions support connections to external memory, data converters, display interfaces, communications transceivers, and control peripherals. A 630 MHz rating provides a useful basis for timing-constrained clock-domain designs, while the 1.2 V core supply helps reduce switching-related power in systems that require substantial programmable logic. The device uses a 90 nm CMOS process and belongs to the Spartan-3 product family. The FT256 designation identifies the 256-ball package configuration, while the -4 suffix identifies the performance grade. The C suffix denotes the commercial temperature grade. Applications must also account for the package's 1.0 mm ball pitch when defining the PCB land pattern, solder-mask design, assembly process, and inspection requirements. Typical uses include industrial control, communications equipment, embedded instrumentation, video and display processing, data acquisition, and general-purpose digital logic. The FPGA is particularly useful when a design benefits from parallel interfaces, configurable I/O standards, hardware multipliers, block RAM, or logic that can be updated after manufacture. Legacy systems can use the device as a bridge between slower legacy interfaces and higher-speed digital processing logic. PCB implementation should follow the manufacturer package and pinout documentation exactly. Decoupling, configuration-interface access, clock routing, voltage sequencing, and unused balls require careful planning before layout. Because the device is a large BGA, assembly also depends on appropriate PCB stack-up, via-in-pad strategy, solder-mask clearance, and thermal design. This product record combines the manufacturer datasheet information with package-specific engineering guidance, drop-in replacement analysis, comparison parameters, and practical design considerations. It is intended to help engineers evaluate FPGA resource allocation, board compatibility, legacy-product maintenance, and migration planning without relying solely on a distributor parameter table.

Permintaan RFG Kontak
XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD
XC3S1000-4FT256I

XC3S1000-4FT256I - 1M Gate Spartan-3 FPGA | AMD

The AMD XC3S1000-4FT256I is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 1,920 logic array blocks, and 173 user I/Os. The device operates from a 1.2 V core supply and has a 630 MHz performance rating. It is packaged in a 256-ball fine-pitch ball grid array designated FT256. A field-programmable gate array, or FPGA, is a programmable digital logic device within the broader semiconductor and configurable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, an FPGA allows designers to implement parallel processing, control, interface, and signal-processing logic in a reconfigurable device. The Spartan-3 architecture combines logic cells, dedicated block RAM, digital signal processing resources, and programmable I/O within one integrated circuit. The XC3S1000-4FT256I provides 432 kbit of embedded memory according to the manufacturer family documentation. Its -4 speed designation identifies the device performance class, while the I suffix identifies the industrial-temperature ordering option. A 256-ball FTBGA package supports dense PCB routing and is suitable for compact control, communications, instrumentation, and embedded-processing systems where many external signals must terminate on a programmable device. Within the Spartan-3 family, this device provides 173 user I/Os and up to 630 MHz device performance. The programmable architecture permits design changes without changing the PCB, while dedicated block RAM supports buffering, packet storage, and moderate-width data paths. The 1.2 V core operating point reduces core power relative to earlier-generation programmable devices, although total board power still depends on I/O activity, configuration resources, and the selected design. Typical uses include industrial automation, embedded control, data acquisition, communications interfaces, and low-cost digital signal processing. The combination of 17,280 logic elements and 173 I/Os allows one device to consolidate several discrete logic functions. Designs requiring more memory, higher I/O density, or a newer migration path should be evaluated against larger Spartan-3 variants or later AMD FPGA families before PCB release. The FT256 package requires careful power, ground, and signal-integrity planning. Follow the Spartan-3 family datasheet for decoupling, configuration, clocking, and package-ball guidance, and validate every board with the completed design rather than relying only on theoretical resource counts. Confirm that the assembled board, manufacturing process, and operating environment remain compatible with the industrial-grade ordering option.

Permintaan RFG Kontak
XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FG320C

XC3S1000-5FG320C - 1M-Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FG320C is a 1-million-system-gate Spartan-3 field-programmable gate array with 17,280 logic cells, 221 I/O, and 442,368 bits of block RAM. It operates from a 1.2 V core supply, uses 90 nm FPGA technology, and is packaged in a 320-pin fine-pitch ball grid array for surface mounting. An FPGA is a semiconductor whose digital logic, interconnect, memory, and I/O behavior are configured through a programmable bitstream. Within the product hierarchy, the XC3S1000 belongs to the Spartan-3 FPGA family, joining programmable logic devices and field-programmable gate arrays within the broader integrated-circuit and semiconductor categories. This makes it appropriate when a design needs hardware parallelism, reconfigurable interfaces, or dedicated logic rather than a software-controlled processor. The device provides 725 MHz maximum performance and 17,280 configurable logic cells. Its 442,368 bits of block RAM support buffering, data storage, and parallel processing, while 221 I/O pins provide extensive connectivity for external memories, control signals, communications, and mixed-signal interfaces. The 320-FBGA package supports compact, high-density PCB layouts but requires careful escape routing and fine-pitch assembly capability. The XC3S1000 architecture is designed for implementation of parallel data paths, protocol bridges, control logic, embedded memory structures, and general-purpose programmable logic. Performance depends on clocking, routing, resource utilization, and the selected FPGA design. A bitstream generated for the correct device, package, speed grade, and configuration settings is essential for reliable operation. Typical applications include industrial automation controllers, networking and communications equipment, test and measurement systems, embedded video processing, sensor acquisition, and legacy interface conversion. The large I/O count and on-chip RAM make the device useful where several external interfaces and parallel data operations must coexist on one device. Design planning should account for the fine-pitch BGA footprint, power decoupling, clock jitter, I/O standards, configuration memory, and thermal performance. PCB signal-integrity analysis is particularly important for high-speed interfaces, while careful bank and voltage planning prevents incompatible I/O standards from being assigned to the same power domain. This page combines the device specifications with application guidance, engineering design notes, and pin-compatible Spartan-3 alternatives. It also highlights where speed grade, temperature grade, and device revision choices affect replacement decisions without overlooking the constraints of an existing 320-ball PCB layout.

Permintaan RFG Kontak
XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD
XC3S1000-5FG456C

XC3S1000-5FG456C - 1M Spartan-3 FPGA, 456-BBGA | AMD

The AMD XC3S1000-5FG456C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 333 I/O interfaces, and a 1.2 V supply in a 456-ball FBGA package. It is a 90 nm programmable logic device built for cost-sensitive embedded systems requiring substantial logic, memory, and parallel I/O capacity. The -5 speed grade and FG456 package identify this configuration as the commercial-temperature, 456-ball member of the Spartan-3 family. An FPGA is a programmable semiconductor whose internal logic, routing, and I/O resources are configured after manufacture. Within the product hierarchy, this device is a field-programmable gate array, part of the broader class of programmable logic devices and integrated circuits. This architecture allows one board design to support multiple hardware functions, shorten development cycles, and support field upgrades through a programmable configuration bitstream. The XC3S1000-5FG456C provides 17,280 logic elements distributed across 1,920 configurable logic blocks, with 7,680 adaptive logic modules and 432 embedded-memory bits identified for this device. Its 333 user I/O interfaces support communication with external processors, memory, converters, and industrial peripherals. A listed maximum clock frequency of 725 MHz describes a headline device capability; actual system performance still depends on the selected design, speed grade, clocking scheme, and timing constraints. The device uses a low 1.2 V operating supply and 90 nm process technology. These characteristics place it in the Spartan-3 generation, which combined a large gate count with a cost-oriented architecture for volume embedded applications. Its ball-grid package concentrates a high pin count into a compact 23 mm by 23 mm square footprint while supporting a 1.00 mm terminal pitch. Typical applications include industrial control, data acquisition, communications infrastructure, embedded instrumentation, video processing, and legacy platform control. The large I/O count is especially useful when a design must bridge multiple buses, capture parallel sensor data, or connect directly to high-speed external logic without requiring another programmable device. For a new PCB layout, use the manufacturer pinout and package-mechanical guidance for the exact FG456 ball map. Existing designs should be checked for voltage, temperature, timing, configuration-interface, and pinout compatibility before substituting any speed- or temperature-grade variant. Configuration storage, clocking, decoupling, and signal-integrity requirements must also follow the Spartan-3 design guidance.

Permintaan RFG Kontak
XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD
XC3S1000-5FG676C

XC3S1000-5FG676C - 1M Gate 676-BGA Spartan-3 FPGA | AMD

AMD XC3S1000-5FG676C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, and 391 user I/Os, packaged in a 676-ball fine-pitch BGA. It operates from a 1.2 V core supply and is manufactured using 90 nm CMOS technology. The device combines programmable logic, dedicated block RAM, and a broad user-I/O interface in a 27 mm by 27 mm surface-mount package. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and interconnect resources are configured after manufacture. In the broader hierarchy, an FPGA belongs to programmable logic devices, alongside complex programmable logic devices, and operates as a configurable element within an embedded control or signal-processing system. This flexibility allows one physical device to implement multiple hardware functions and supports product revisions without changing the printed circuit board. The Spartan-3 architecture provides 442,368 total RAM bits alongside 17,280 logic cells. Its 391 user I/Os support integration with external memory, converters, clocks, communications links, and control peripherals. The -5 speed designation identifies the device's performance grade, while the C suffix denotes the commercial temperature grade associated with an operating range of 0°C to 85°C. The 676-ball FBGA package supports dense board routing while requiring careful escape routing and multilayer PCB construction. Technical complexity increases with the number of available logic and I/O resources. Designers must account for clock-domain constraints, supported I/O standards, memory bandwidth, pin placement, and the finite routing capacity of the selected FPGA. Configuration data controls the implemented circuit, so the bitstream, configuration interface, clock source, startup behavior, and reset strategy should be validated as one complete design rather than treated as isolated device features. Typical uses include industrial automation, communications equipment, embedded video control, test and measurement, and general-purpose digital signal processing. In an industrial controller, the FPGA can combine parallel interface logic, protocol conversion, and deterministic sampling in one device. In communications equipment, the same programmable fabric can adapt to different framing and signaling requirements while providing 442,368 RAM bits for buffering or packet processing. PCB implementation is the principal practical consideration for this 676-ball package. Use a board stackup that supports the required escape-routing density, place decoupling close to every supply ball, and follow the manufacturer's ball-map and layout guidance for power, ground, and configuration pins. Confirm the selected footprint and pin assignments against the package drawing before releasing the design. This product page combines the device specifications, same-footprint replacement options, engineering guidance, application fit, and package-related constraints into a practical engineering reference. It also distinguishes exact published attributes from parameters that still require confirmation before schematic or PCB sign-off.

Permintaan RFG Kontak
XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx
XC3S1000-5FT256C

XC3S1000-5FT256C - 1M Gate Spartan-3 FPGA | Xilinx

The Xilinx XC3S1000-5FT256C is a Spartan-3 field-programmable gate array with 1,000,000 system gates, 17,280 logic cells, 442,368 RAM bits, and 173 user I/O in a 256-ball FTFBGA package. Its core supply operates from 1.14 V to 1.26 V, while the -5 speed designation identifies the device’s performance grade. A field-programmable gate array is a semiconductor whose digital logic, memory blocks, and I/O paths are configured after fabrication. The Spartan-3 FPGA family occupies the hierarchy FPGA, programmable logic device, configurable logic, and semiconductor. This makes the XC3S1000-5FT256C suitable for designs requiring parallel logic, embedded block RAM, programmable interfaces, and field-updatable configurations. Key features include 17,280 logic cells, 442,368 total RAM bits, 1,000,000 system gates, and 173 user I/O. The -5 suffix denotes a specific speed grade, while the FT256C package designation identifies a 256-ball fine-pitch plastic ball-grid-array configuration. These resources support concurrent control logic, data buffering, interface bridging, and protocol-specific state machines without relying on multiple discrete programmable devices. The device is based on the Spartan-3 FPGA architecture and provides 1,920 slices as reported by the product listing. Distributed RAM and dedicated block RAM make it useful for small embedded memories, data pipelines, lookup tables, and temporary packet storage. Its 173 available I/O provide broad connectivity for external memory, clocks, serial links, and control signals, although each interface must still be assigned within the device’s supported electrical and timing constraints. Typical uses include industrial control, telecommunications equipment, data-acquisition systems, embedded instrumentation, and legacy network-interface designs. Its 1M-gate architecture can consolidate parallel control and datapath functions into one package, while the substantial I/O count supports board-level integration with processors, memory devices, transceivers, and custom interface logic. Design planning must account for the FTFBGA package’s fine pitch, differential-pair routing, via-in-pad and solder-mask requirements, and the very large exposed BGA footprint. Signal integrity, decoupling, configuration-memory implementation, and bank-specific I/O constraints should be reviewed against the manufacturer’s Spartan-3 design guidance before schematic or layout signoff. This product record combines the exact XC3S1000-5FT256C package and resource details with practical implementation guidance, speed-grade alternatives, and parameter-by-parameter comparison information. It is intended to help engineers identify a configuration-compatible Spartan-3 option and plan the PCB, toolchain, and interface requirements for a maintainable FPGA platform.

Permintaan RFG Kontak
XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx
XC3S100E-4TQ144I

XC3S100E-4TQ144I - 2,160-Cell Spartan-3E FPGA | Xilinx

The Xilinx XC3S100E-4TQ144I is a Spartan-3E field-programmable gate array with 2,160 logic cells, 240 logic blocks, 73,728 RAM bits, and 108 user I/O pins. It operates from a nominal 1.2 V core supply, supports a 1.14 V to 1.26 V voltage range, and is packaged in a 144-pin TQFP. The -4 speed grade supports operation up to 572 MHz. A field-programmable gate array, or FPGA, is a semiconductor whose digital logic, memory, and I/O behavior can be configured after manufacture. The XC3S100E belongs to the Spartan-3E FPGA family, which sits within the broader hierarchy of FPGA, programmable logic, digital semiconductor, and embedded-electronics components. This makes it suitable for designs requiring parallel logic, control, data acquisition, interface bridging, or programmable signal processing. The device provides 50,000 system gates and 2,160 logic cells, providing a practical capacity for control logic, protocol interfaces, state machines, and small embedded signal-processing functions. Its 73,728 RAM bits can support data buffering, packet storage, lookup tables, and configuration or working memory. The 108 user I/O pins give a system designer substantial connectivity for buses, counters, serial links, and external data acquisition devices. The XC3S100E-4TQ144I uses a 1.2 V CMOS core and is specified for an industrial temperature range of -40°C to +100°C. The -4 designation identifies its performance grade, while the 144-pin TQFP package provides a conventional leaded surface-mount format with exposed thermal and thermal-pad considerations that must be handled according to the package drawing. Its 90 nm Spartan-3E process generation emphasizes low-cost programmable logic rather than the very high performance of larger modern FPGA families. Typical applications include industrial control and automation, data-acquisition front ends, communications protocol converters, embedded test equipment, instrumentation, and compact embedded-processing subsystems. The device can implement parallel-to-serial conversion, FIFO-based data movement, state-machine control, and custom peripheral functions while allowing firmware or logic revisions without changing the PCB. When assigning this FPGA, verify the exact pin assignments, bank supply requirements, configuration interface, clock topology, and I/O standards against the Spartan-3E family data sheet. The industrial temperature grade makes the part appropriate for temperature-challenged equipment, but the legacy 90 nm process and 2,160-cell limit should be considered against system timing, memory, and current design requirements. This product record combines manufacturer-family technical data with practical distinctions between temperature-grade, lead-free, and extended-temperature ordering variants. It also documents drop-in footprint considerations, configuration and design guidance, and application-specific fit so engineers can evaluate the XC3S100E-4TQ144I against other 144-pin Spartan-3E devices before committing to a design.

Permintaan RFG Kontak