Produk (44.000+)

XC7K355T-1FFG901C - 28nm Kintex-7 FPGA | AMD
XC7K355T-1FFG901C

XC7K355T-1FFG901C - 28nm Kintex-7 FPGA | AMD

The AMD XC7K355T-1FFG901C is a Kintex-7 field-programmable gate array fabricated on a 28 nm process and supplied in a 900-ball FCBGA package. The device provides 356,160 logic cells, 300 user I/O, and a 1 V-class core supply with a documented configuration range of 0.97 V to 1.03 V. The -1 suffix identifies the device speed grade, while FFG901 denotes its 900-ball package and C identifies the commercial temperature option. A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA and CPLD devices are reconfigurable digital semiconductors used to implement parallel processing, data acquisition, protocol bridging, signal processing, and control logic. Unlike fixed-function application-specific integrated circuits, an FPGA allows its interconnect, logic, memory, and digital signal processing resources to be configured after manufacture. This makes the XC7K355T suitable for designs requiring parallel channels, high throughput, deterministic interfaces, or field-updatable behavior. The XC7K355T combines programmable logic with dedicated memory and DSP resources. The Kintex-7 family provides 25,740 Kb of block RAM for the 355T device and 300 I/O in the FFG901 configuration, while the 356,160-cell resource count supports substantial data-path and control parallelism. The -1 speed grade provides a defined balance between performance and power relative to the faster -2 grade, making it suitable for high-throughput processing where the absolute performance of -2 is unnecessary. The device can implement multi-gigabit interfaces, digital signal-processing chains, high-speed memory or network interfaces, embedded control, and test-and-measurement logic. Its 900-ball package provides extensive connection capacity but demands careful PCB layout, power delivery, thermal management, and BGA assembly expertise. Configuration and programming must follow the Kintex-7 architecture and package-specific pinout resources rather than general-purpose assumptions. Typical applications include high-speed network interfaces, test and measurement equipment, industrial imaging, radar and signal processing, communications infrastructure, and accelerator prototyping. In each case, designers should allocate logic, block RAM, DSP slices, clocking resources, and I/O according to the actual timing and utilization report rather than treating the total logic-cell count as directly usable application performance. A key design consideration is the FCBGA power and escape-routing network. Follow the AMD package pinout files and the Kintex-7 PCB design guidance for ball assignment, decoupling, voltage sequencing, thermal vias, and high-speed routing. A 900-ball package also requires assembly processes capable of fine-pitch BGA inspection and reliable X-ray or equivalent quality verification. This product summary combines the exact package and resource identifiers with practical guidance for FPGA selection, PCB implementation, thermal design, and drop-in sourcing. The comparison table and alternative list distinguish speed-grade and temperature-grade choices that preserve the FF901 footprint from options that require a different package or offer only general functional similarity.

Permintaan RFG Kontak
XC7K355T-2FF901I - Kintex-7 FPGA 356K Logic Cells | AMD
XC7K355T-2FF901I

XC7K355T-2FF901I - Kintex-7 FPGA 356K Logic Cells | AMD

The AMD XC7K355T-2FF901I is a high-performance Field Programmable Gate Array (FPGA) from the Kintex-7 family, designed to deliver an optimal balance of logic density, DSP capability, and power efficiency. It features 356,160 logic cells, 26,357,760 block RAM bits, and 300 user I/O pins in a 900-ball FCBGA (FF901) package. This device operates with power supplies of 1.0V, 1.8V, and 3.3V, supporting a wide range of I/O standards. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks and interconnects that allow the hardware to be reprogrammed to implement any digital logic function. The Kintex-7 family sits between the cost-optimized Artix-7 and the high-performance Virtex-7 in the Xilinx 7-series hierarchy, offering a balance of price, performance, and power for mid-to-high-range applications. Key features of the XC7K355T-2FF901I include 356,160 logic cells, 26,357,760 bits of block RAM, and 300 user I/O pins. The -2 speed grade indicates a mid-range performance level, while the I suffix denotes an industrial temperature range of -40°C to +100°C. The FF901 package provides 900 balls in a square BGA form factor, enabling high-density routing for complex designs. Technically, the Kintex-7 family is built on a 28nm high-k metal gate (HKMG) process technology, offering significant power and performance improvements over previous generations. The device includes advanced DSP48E1 slices, high-speed transceivers, and integrated memory controllers, making it suitable for a wide range of applications. The 900-ball package supports multiple I/O standards and provides excellent signal integrity for high-speed interfaces. Typical applications for the XC7K355T-2FF901I include telecommunications infrastructure, aerospace and defense systems, high-performance computing, and medical imaging. Its combination of logic density, DSP capability, and power efficiency makes it ideal for signal processing, software-defined radio, and video processing applications. When designing with this device, careful attention must be paid to power supply decoupling and thermal management. The 28nm process and high logic density require robust power distribution networks and adequate cooling solutions to ensure reliable operation at industrial temperatures.

Permintaan RFG Kontak
XC7K355T-2FFG901C - 356K Logic Cell Kintex-7 FPGA | AMD
XC7K355T-2FFG901C

XC7K355T-2FFG901C - 356K Logic Cell Kintex-7 FPGA | AMD

The AMD XC7K355T-2FFG901C is a Kintex-7 field-programmable gate array with 356,160 logic cells, 26,357,760 bits of block RAM, and 300 user I/O in a 901-pin FCBGA package. Built on a 28 nm process and specified as a -2 speed-grade device, it combines a large programmable-logic fabric with high-speed serial transceivers and hard DSP resources for demanding signal-processing, communications, industrial-control, and test-equipment designs. A Kintex-7 FPGA is a programmable-logic device within the broader FPGA and semiconductor hierarchy. Unlike fixed-function ASICs, an FPGA allows designers to implement parallel algorithms, control logic, interfaces, and signal-processing pipelines in reconfigurable hardware. The Kintex-7 family occupies a middle position between lower-resource Spartan-7 devices and higher-end Virtex-7 devices, combining substantial logic capacity, dedicated hardware resources, and midrange transceivers. The XC7K355T provides 356,160 logic cells organized into 27,825 configurable logic blocks and 55,650 adaptive logic modules. Its block-memory capacity totals 26,357,760 bits, supporting packet buffering, DSP working storage, and data acquisition. The 300 user I/Os provide external interfaces alongside the device's dedicated high-speed serial transceivers. These resources make the device suitable for parallel ADC and DAC pipelines, network interface equipment, radar and test systems, industrial automation, and embedded video processing. The -2 suffix identifies the device's -2 performance grade. Vendor listings report a maximum operating figure of 1,286 MHz for this device, while the core supply is identified as a nominal 1 V supply. The FFG901 designation corresponds to the 901-pin flip-chip BGA package, and the C ordering suffix identifies the commercial-temperature product version. Exact operating-temperature limits, transceiver characteristics, bank voltage requirements, and configuration-pin details must be confirmed in the package-specific Kintex-7 documentation. The 901-pin FCBGA package makes careful PCB design essential. High-speed differential pairs require controlled impedance, length matching, and continuous return paths, while power delivery must support substantial transient current during configuration and logic switching. Decoupling, via stitching, thermal management, and BGA escape-routing density can determine whether a design reaches its intended performance. This page combines package-specific sourcing information with drop-in replacement analysis and engineering guidance for Kintex-7 migrations. It also identifies where speed-grade, temperature-grade, and package differences must be reviewed before any substitution is approved for production.

Permintaan RFG Kontak
XC7K355T-2FFG901I - Kintex-7 FPGA 356K Logic Cells | AMD
XC7K355T-2FFG901I

XC7K355T-2FFG901I - Kintex-7 FPGA 356K Logic Cells | AMD

The AMD XC7K355T-2FFG901I is a high-performance Field Programmable Gate Array (FPGA) from the Kintex-7 family, offering an optimal balance of price, performance, and power consumption. It features 356,160 logic cells, 300 user I/Os, and 26,357,760 total RAM bits, all in a 900-ball FCBGA package. Operating from a 0.97V to 1.03V supply, this device is designed for a wide range of applications including aerospace, automotive, industrial, and defense sectors. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and reconfigurable interconnects, allowing for rapid prototyping and flexible hardware design. The Kintex-7 family is positioned as a mid-to-high-range solution, providing substantial logic density, advanced DSP capabilities, and high-speed serial connectivity. Key features of the XC7K355T-2FFG901I include 27,825 CLBs, 710 DSP slices, and support for MMCM and PLL clock management. The device operates at a maximum frequency of 1286 MHz and is built on 28nm CMOS technology. The FCBGA-901 package offers excellent thermal and electrical performance, with a compact footprint suitable for space-constrained designs. Technically, the Kintex-7 architecture integrates a flexible 6-input look-up table (LUT) fabric, dedicated block RAM, and high-speed transceivers. The device supports various configuration methods including JTAG, master SPI, and slave SelectMAP. Its advanced power management features enable efficient operation across different performance modes. Typical applications include software-defined radio, high-performance computing, medical imaging, and video processing. The XC7K355T's combination of logic density and DSP capability makes it ideal for signal processing tasks that require parallel computation. When designing with this FPGA, ensure adequate decoupling capacitors on all power rails and follow the recommended power-up sequence to avoid latch-up. The device requires careful thermal management due to its high power dissipation at full utilization.

Permintaan RFG Kontak
XC7K355T-3FFG901E - Kintex-7 FPGA, 356K Logic Cells | AMD
XC7K355T-3FFG901E

XC7K355T-3FFG901E - Kintex-7 FPGA, 356K Logic Cells | AMD

The AMD XC7K355T-3FFG901E is a high-performance Field Programmable Gate Array (FPGA) from the Kintex-7 family, designed to deliver an optimal balance of price, performance, and power consumption. It features 356,160 logic cells, 300 user I/O pins, and 26,357,760 bits of block RAM, all housed in a 900-ball FCBGA (31x31mm) package. The device operates from a 1.0V core supply (0.97V to 1.03V range) and supports high-speed serial transceivers, making it suitable for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and interconnects that can be programmed to implement any digital logic function. The Kintex-7 family sits between the low-power Artix-7 and high-performance Virtex-7 families, offering a 2X price-performance improvement over the previous generation. This makes it a popular choice for applications requiring substantial logic density, advanced DSP capabilities, and high-speed serial connectivity without the cost of flagship devices. Key features of the XC7K355T-3FFG901E include 356,160 logic cells, 27,825 CLBs, 300 user I/O pins, and 26,357,760 bits of total RAM. It also integrates 16 GTX transceivers, 8 MMCMs, and 8 PLLs for clock management. The device is built on 28nm technology and supports a core voltage of 1.0V, enabling high performance with manageable power consumption. The FCBGA-901 package provides excellent thermal and electrical characteristics for demanding applications. From a technical perspective, the Kintex-7 architecture includes dedicated DSP48E1 slices for high-speed arithmetic, block RAM for data storage, and configurable I/O banks supporting various voltage standards. The device also features advanced clock management through MMCM and PLL blocks, ensuring precise timing for complex designs. The 28nm process technology balances performance and power, making it suitable for both compute-intensive and power-sensitive applications. Typical applications for the XC7K355T-3FFG901E include 5G wireless infrastructure, high-performance computing, aerospace and defense systems, and medical imaging equipment. Its combination of logic density, DSP capability, and high-speed transceivers makes it ideal for signal processing, data acquisition, and communication systems. The device is also used in prototyping and emulation systems where reconfigurability is essential. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The 1.0V core supply requires low-impedance decoupling capacitors placed close to the device pins. Adequate cooling, such as a heatsink or forced airflow, is necessary to maintain junction temperature within specified limits under full load.

Permintaan RFG Kontak
XC7K410T-1FBG676I - Kintex-7 406,720-Cell FPGA | AMD
XC7K410T-1FBG676I

XC7K410T-1FBG676I - Kintex-7 406,720-Cell FPGA | AMD

The AMD XC7K410T-1FBG676I is a Kintex-7 field-programmable gate array with 406,720 logic cells, up to 250 I/O sites, and 676-ball Flip Chip BGA packaging in the FBG676 configuration. Its 28 nm process technology supports high-density programmable logic, DSP processing, high-speed serial connectivity, memory interfaces, and PCIe Gen3 designs within a single adaptive SoC and FPGA device. A Kintex-7 FPGA belongs to the FPGA and CPLD product hierarchy, combining configurable logic blocks, programmable I/O, block RAM, DSP slices, digital clock managers, and high-speed transceiver resources. FPGAs differ from fixed-function logic ICs because engineers define the circuit architecture, interfaces, and parallel processing behavior in HDL, synthesis tools, and programmable device software. This makes the family suitable for designs requiring substantial parallelism or hardware acceleration. Key features include 406,720 logic cells, a -1 speed grade, an industrial temperature designation, and support for standards including PCIe Gen3 and 10 Gigabit Ethernet. The device also includes MMCM and PLL clock-management resources, allowing designers to generate, divide, multiply, phase-shift, and jitter-filter reference clocks for high-speed interfaces and parallel processing pipelines. The FBG676 package exposes 676 ball contacts and 250 configurable I/O sites. High-speed I/O can be assigned according to bank voltage requirements, while dedicated resources support high-performance serial links. Exact pin functions, differential I/O standards, voltage limits, AC timing, and transceiver rates must be selected from the FBG676 package tables in the AMD Kintex-7 data sheet DS182 and the corresponding package pinout files. Typical uses include PCIe endpoint and accelerator designs, 10 Gigabit Ethernet equipment, industrial video processing, high-throughput digital signal processing, communications infrastructure, and test-and-measurement systems. Designers can distribute independent channels across DSP slices and block RAM, then implement clocking, serializing, and data-valid logic around those parallel processing cores. PCB implementation should preserve the package's power, ground, decoupling, and high-speed routing requirements. Place decoupling capacitors near the relevant supply balls, maintain the documented ball-out and plane connections, and route high-speed differential pairs as controlled-impedance transmission lines. Validate bitstream, timing, power integrity, and thermal performance before releasing a production layout. This page combines device identification, verified source links, package-level details, engineering alternatives, comparison criteria, and design guidance. It also separates confirmed drop-in options from broader FPGA migration choices, helping engineers evaluate PCB reuse without overlooking speed grade, density, temperature, and resource differences.

Permintaan RFG Kontak
XC7K410T-1FBG900C - 406,720-Cell Kintex-7 FPGA | AMD
XC7K410T-1FBG900C

XC7K410T-1FBG900C - 406,720-Cell Kintex-7 FPGA | AMD

The AMD XC7K410T-1FBG900C is a Kintex-7 field-programmable gate array with 406,720 logic cells, 28,620 Kb of block RAM, and 500 I/O in a 900-ball FCBGA package. It combines programmable logic, dedicated DSP resources, programmable I/O, high-speed serial transceivers, and embedded memory for demanding communications, signal-processing, industrial, and test systems. A field-programmable gate array is a semiconductor whose digital functionality is configured after manufacture. The XC7K410T belongs to the Kintex-7 FPGA hierarchy, where it sits between lower-cost programmable-logic families and larger FPGA/CPLD products. Its large logic capacity supports parallel processing, protocol bridging, control logic, video or image pipelines, and hardware acceleration without requiring a custom ASIC. Principal device attributes include a -1 speed grade, the 28 nm Kintex-7 process generation, 406,720 logic cells, 28,620 Kb of block RAM, and 500 available I/O in the FBG900 package. Dedicated arithmetic resources support fixed-point and DSP-oriented pipelines, while selectable I/O standards and high-speed transceivers allow board designers to implement mixed-speed external interfaces. Exact transceiver ratings depend on the selected I/O type and operating conditions. The FBG900 package provides the greatest pin and I/O count among the referenced XC7K410T package options, making it appropriate for designs requiring dense connectivity. The -1 grade trades peak performance for lower power and heat than faster Kintex-7 speed grades, making it appropriate when the design does not require the maximum timing margin of -2 or -3 devices. Bank planning remains essential because power, voltage, and transceiver capabilities are organized by I/O bank. Typical uses include optical-network control planes, high-speed data acquisition, industrial vision, radar and communications test equipment, storage interfaces, and accelerator cards. The device can combine several interfaces and real-time processing functions on one board. For designs with lower I/O demand, smaller 676-ball packages may simplify routing and reduce package complexity, while faster grades may be necessary for difficult timing closures. Power, decoupling, and thermal management dominate FBG900 implementation. Follow the manufacturer power-guidance tables for each rail, provide high-frequency decoupling close to the device, and design the package substrate for the appropriate thermal and power-integrity requirements. Because this page covers an exact ordering code, verify speed grade, temperature grade, package, and lifecycle status against the current AMD ordering information before release. This product record combines exact ordering-code identification, package-aware alternative analysis, comparison parameters, application guidance, and practical PCB design cautions. It is intended to accelerate component selection while preserving the validation steps engineers must complete against the AMD Kintex-7 documentation and package-specific files.

Permintaan RFG Kontak
XC7K410T-1FBG900I - 406K Logic Cell Kintex-7 FPGA | AMD
XC7K410T-1FBG900I

XC7K410T-1FBG900I - 406K Logic Cell Kintex-7 FPGA | AMD

AMD XC7K410T-1FBG900I is a Kintex-7 field-programmable gate array built on a 28 nm process, providing 406,720 logic cells, 28,620 Kb of block RAM, and 500 I/O in an FBG900 ball-grid-array package. The -1 speed grade targets the performance and power balance required by high-throughput communications, industrial processing, and high-performance embedded systems. A field-programmable gate array is a semiconductor whose logic, memory, and input/output behavior is configured after manufacture. Within the product hierarchy, the XC7K410T belongs to the Kintex-7 FPGA family, combines programmable logic blocks with block RAM and digital signal processing resources, and serves as a configurable alternative to a large quantity of interconnected fixed-function logic devices. Its large I/O count supports high-pin-count, multi-bank system designs. The device contains 406,720 logic cells and 28,620 Kb of embedded block RAM. Its 500 I/O positions provide substantial connectivity for parallel data acquisition, control logic, high-speed memory interfaces, and mixed serial/parallel external interfaces. AMD identifies Kintex-7 as supporting mainstream connectivity such as PCI Express Gen3 and 10 Gigabit Ethernet, making the family applicable to networking adapters, industrial controls, test equipment, and embedded processing platforms. The FBG900 package provides 900 package balls and substantial routing flexibility, while the -1 suffix identifies the device performance grade and the I suffix identifies the industrial temperature option. Exact core voltage limits, current consumption, block RAM organization, DSP slice count, and worst-case timing values must be confirmed in the AMD Kintex-7 data sheet and the associated package documentation before a design is released. Typical implementations include 10 Gigabit Ethernet interfaces, PCI Express Gen3 endpoints, industrial vision and control systems, high-speed test and measurement platforms, and communications equipment. The large logic and RAM resources allow parallel data paths, protocol engines, packet processing, and supervisory logic to be consolidated into one FPGA rather than implemented across multiple devices. PCB design requires careful assignment of the 500 I/O pins to compatible voltage banks, followed by validation of package-ball mappings against the AMD Kintex-7 package pinout files. Designers should also budget PCB routing for high-speed serial links and provide suitable power distribution for the complete Kintex-7 power architecture. This product record combines the 406,720-cell resource count, 28,620 Kb block RAM, 500 I/O, 900-ball package construction, AMD connectivity support, and same-package replacement distinctions. It also provides application-specific design guidance and a parameter comparison focused on board-level migration rather than treating devices with different packages as drop-in alternatives.

Permintaan RFG Kontak
XC7K410T-1FF900I - Kintex-7 FPGA 406K Logic Cells | AMD
XC7K410T-1FF900I

XC7K410T-1FF900I - Kintex-7 FPGA 406K Logic Cells | AMD

The AMD XC7K410T-1FF900I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology. It features 406,720 logic cells, 500 user I/O pins, and 29,306,880 bits of block RAM, all housed in a 900-ball FCBGA package. This device is part of the Kintex-7 family, which balances high-speed serial connectivity, advanced memory interfacing, and cost-effectiveness for a wide range of applications. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and reconfigurable interconnects, allowing them to implement complex digital logic designs. FPGAs are used in applications requiring high-speed parallel processing, rapid prototyping, and field-upgradable hardware, such as telecommunications, data centers, and aerospace systems. Key features of the XC7K410T-1FF900I include 500 user I/O pins, 29,306,880 bits of block RAM, and support for high-speed transceivers. The device operates at a core voltage of 1V and is available in the -1 speed grade, offering a balanced performance-power trade-off. The 900-ball FCBGA package provides excellent thermal and electrical characteristics, making it suitable for high-density designs. Technically, the Kintex-7 family is built on AMD's 28nm high-k metal gate (HKMG) process, which reduces power consumption while maintaining high performance. The device includes hardened memory controllers, DSP slices, and clock management tiles (CMTs) with MMCM and PLL, enabling efficient implementation of complex algorithms and high-speed interfaces. The XC7K410T-1FF900I supports various I/O standards, including LVCMOS, LVDS, and HSTL, and can interface with DDR3/DDR4 memory. Typical applications include wired and wireless communications, data center acceleration, video and image processing, and scientific instrumentation. The high logic density and I/O count make it ideal for implementing large-scale digital signal processing (DSP) chains, packet processing, and software-defined radio (SDR) systems. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a well-designed PCB layout to ensure signal integrity at high speeds. AMD provides comprehensive design tools, including Vivado, to facilitate implementation and verification.

Permintaan RFG Kontak
XC7K410T-1FFG676C - Kintex-7 FPGA 406K Logic Cells | AMD
XC7K410T-1FFG676C

XC7K410T-1FFG676C - Kintex-7 FPGA 406K Logic Cells | AMD

The AMD XC7K410T-1FFG676C is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology. It features 406,720 logic cells, 400 I/O pins, and 29,306,880 bits of block RAM, all housed in a 676-ball FCBGA package. This device is designed for applications requiring high DSP ratios, cost-effective packaging, and support for mainstream standards like PCIe Gen3 and 10 Gigabit Ethernet. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and a hierarchy of reconfigurable interconnects that allow the blocks to be wired together in different configurations. This flexibility makes FPGAs ideal for prototyping, low-to-mid volume production, and applications requiring hardware reconfiguration. The Kintex-7 family sits between the Artix-7 (lowest cost) and Virtex-7 (highest performance) in AMD's 7-series portfolio, offering the best price/performance/watt at 28nm. Key features of the XC7K410T-1FFG676C include 1,540 DSP48E1 slices for high-speed digital signal processing, 29.3 Mb of block RAM, and support for PCIe Gen3 x8 and 10 Gigabit Ethernet. The device operates from a 1.0V core voltage and supports a wide range of I/O standards including LVCMOS, LVDS, and HSTL. The -1 speed grade provides a balanced performance point suitable for many applications. The architecture integrates configurable logic blocks (CLBs), block RAM, DSP slices, and high-speed transceivers. The 676-ball FCBGA package provides excellent thermal and electrical performance, with the exposed pad aiding heat dissipation. The device supports partial reconfiguration, allowing dynamic updates to specific logic regions without disrupting the entire design. Typical applications include wired communications, broadcast, aerospace and defense, and high-performance computing. The high DSP ratio and cost-effective packaging make it particularly well-suited for wireless MIMO base stations, medical imaging, and video processing systems. When designing with this device, careful attention must be paid to power supply decoupling and thermal management. The 1.0V core supply requires a robust power delivery network with multiple decoupling capacitors to maintain signal integrity at high switching frequencies.

Permintaan RFG Kontak
XC7K410T-1FFG676I - 406,720-Cell Kintex-7 FPGA | AMD
XC7K410T-1FFG676I

XC7K410T-1FFG676I - 406,720-Cell Kintex-7 FPGA | AMD

The AMD XC7K410T-1FFG676I is a Kintex-7 field-programmable gate array with 406,720 logic cells, 28 nm fabrication technology, a 400 I/O configuration, and a 676-ball FCBGA package. It targets demanding systems requiring high programmable logic density, DSP processing, high-speed serial connectivity, and flexible I/O allocation in a single integrated device. The -1 designation identifies the -1 speed grade within the Kintex-7 family, while the FFG676 suffix identifies the 676-ball flip-chip ball-grid-array package and the I suffix identifies the industrial temperature grade. A Kintex-7 FPGA belongs to the programmable-logic hierarchy: FPGA, programmable logic device, digital semiconductor, and system-level configurable IC. Unlike fixed-function processors or application-specific integrated circuits, an FPGA implements parallel data paths, control logic, serial interfaces, and signal-processing functions in programmable silicon. This makes the device useful where product requirements evolve, where parallel throughput is more important than sequential instruction efficiency, or where a single device can consolidate multiple discrete logic functions. The XC7K410T provides a logic-cell count of 406,720 and supports up to 400 I/O for this device and package combination. Its 28 nm Kintex-7 architecture is designed to balance performance and power while providing high ratios of DSP resources for communications, industrial imaging, and signal-processing systems. The family supports mainstream connectivity including PCI Express Gen3 and 10 Gigabit Ethernet, enabling high-bandwidth host interfaces and network-facing programmable data paths. The -1 speed grade is intended for designs that require a predictable performance class without moving to the faster -2 grade. Because FPGA timing closure depends on device speed, utilization, clocking, I/O standards, and routing congestion, an FPGA design should be implemented and timing-analyzed for the exact XC7K410T-1FFG676I device rather than inferred from a generic Kintex-7 family document. The device also contains dedicated resources such as block RAM, DSP blocks, clock-management circuitry, and high-speed transceivers. Typical uses include high-throughput protocol handling, 10 Gigabit Ethernet interfaces, PCI Express endpoint or bridge designs, industrial control and test systems, high-channel-count data acquisition, and programmable video or communications pipelines. The 400 available I/O allow a system to combine multiple interface standards while retaining programmable logic for protocol termination, packet processing, buffering, and control. Configurable memory and DSP resources can accelerate functions that would otherwise require substantial external logic. The primary PCB consideration is the 676-ball FCBGA footprint. Designers must follow the AMD package pinout files and UG475 guidance for ball assignment, power-plane construction, decoupling, and high-speed routing. Differential pairs and high-speed transceiver paths require controlled impedance, length matching, and continuous reference planes. Thermal design must also account for the concentration of high-utilization logic and DSP activity in the center of the device. This page combines device specifications, package details, pricing workflows, same-package migration options, comparison data, and practical implementation guidance. It helps engineers identify whether the -1 speed grade and industrial package configuration fit a new Kintex-7 design before committing to a PCB layout or long-lead program.

Permintaan RFG Kontak
XC7K410T-1FFG900I - Kintex-7 FPGA 406K Logic Cells | AMD
XC7K410T-1FFG900I

XC7K410T-1FFG900I - Kintex-7 FPGA 406K Logic Cells | AMD

The AMD XC7K410T-1FFG900I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology. It delivers 406,720 logic cells, 500 user I/Os, and 29,306,880 bits of block RAM, all housed in a 900-ball FCBGA (31x31mm) package. Operating from a 1V core supply, this device targets demanding applications requiring high logic density, DSP capability, and serial connectivity. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the designer after manufacturing, allowing custom digital logic implementations. FPGAs sit within the broader hierarchy of programmable logic devices, offering reconfigurability that bridges the gap between fixed-function ASICs and software-programmable processors. The Kintex-7 family is positioned as a mid-range, high-performance FPGA family within the AMD/Xilinx 7 series, balancing logic capacity, transceiver speed, and power efficiency. Key features of the XC7K410T-1FFG900I include 500 user I/Os supporting various I/O standards, 29,306,880 bits of block RAM for on-chip data storage, and 1,540 DSP slices for high-throughput signal processing. The device also integrates 16 GTX transceivers capable of up to 12.5 Gb/s, enabling high-speed serial communication. The -1 speed grade offers a balanced performance point, while the industrial (I) temperature grade supports operation from -40°C to +100°C. Architecturally, the Kintex-7 FPGA is built on a 28nm high-k metal gate (HKMG) process, providing a favorable performance-per-watt ratio. The device includes hardened memory controllers, PCIe blocks, and mixed-mode clock managers (MMCMs) and PLLs for robust clock generation. This integration reduces external component count and simplifies board design. Typical applications include high-performance computing, wired and wireless communications, aerospace and defense systems, and medical imaging. The combination of high logic density, DSP resources, and high-speed transceivers makes it suitable for software-defined radio, radar processing, and video processing systems. When designing with this device, careful attention to power supply decoupling and thermal management is essential. The 1V core supply requires a clean, low-impedance power plane, and the FCBGA package's thermal pad should be connected to a solid ground plane with adequate vias for heat dissipation.

Permintaan RFG Kontak
XC7K410T-2FBG676C - Kintex-7 406K FPGA | AMD
XC7K410T-2FBG676C

XC7K410T-2FBG676C - Kintex-7 406K FPGA | AMD

The AMD XC7K410T-2FBG676C is a Kintex-7 field-programmable gate array with 406,720 logic cells, 400 user I/O, and a nominal core voltage of 1 V, housed in a 676-ball FCBGA package. The -2 speed grade is intended for designs requiring higher performance than the -1 grade, while the C suffix identifies the commercial temperature range. A field-programmable gate array is a semiconductor whose digital logic, interconnect, and dedicated hardware blocks are configured after manufacture. An FPGA belongs to the programmable-logic hierarchy, combining configurable logic, block RAM, DSP resources, programmable I/O, and clocking into one device. This integration lets a system implement parallel processing, interface bridging, protocol handling, and signal processing without using multiple fixed-function chips. The XC7K410T-2FBG676C belongs to AMD's Kintex-7 family, which is manufactured using a 28 nm process. AMD describes the family as a price/performance and performance/watt solution for communications, networking, industrial, and embedded systems. Its principal device resources include 406,720 logic cells and 400 user I/O, providing substantial parallel-processing capacity and external connectivity. The FBG676 designation identifies the 676-ball FCBGA package used by this ordering code. Its large ball grid supports dense connections between the FPGA fabric and surrounding circuitry, while the -2 speed grade distinguishes it from lower-speed XC7K410T variants. The C temperature suffix corresponds to a commercial operating range of 0 °C to 85 °C, making the device appropriate for equipment intended for controlled commercial environments. Typical uses include high-throughput network packet processing, industrial control and test equipment, embedded video pipelines, serial-interface aggregation, and programmable logic for instrumentation. The 406,720-cell fabric is especially useful when a design requires many parallel lanes or custom hardware functions that would otherwise require multiple processors, FPGAs, or discrete logic devices. PCB design should use the AMD Kintex-7 package pinout files and UG475 guidance for ball assignment, power planning, and PCB layout. Designers should also review the device-specific datasheet for supported I/O standards, speed grades, configuration requirements, and power-sequencing constraints before releasing the schematic or PCB. This product page combines the verified family specifications, order-code details, sourcing references, and practical package-planning information. It also identifies same-package alternatives for speed- and temperature-grade decisions while clearly separating pin-compatible migration from broader FPGA replacements that require a different package or board design.

Permintaan RFG Kontak
XC7K410T-2FBG900C - 406,720-Cell Kintex-7 FPGA | AMD
XC7K410T-2FBG900C

XC7K410T-2FBG900C - 406,720-Cell Kintex-7 FPGA | AMD

The AMD XC7K410T-2FBG900C is a Kintex-7 field-programmable gate array with 406,720 logic cells, 28 nm fabrication technology, a 1 V core supply, and a 900-pin lidless FCBGA package. It is designed for high-performance programmable logic, parallel processing, signal processing, networking, storage, and test-and-measurement systems requiring substantial logic density and high-speed I/O capability. A field-programmable gate array is a semiconductor device whose digital architecture can be configured after manufacture. The FPGA category sits above programmable logic devices and complex programmable logic devices, combining configurable logic blocks, programmable interconnect, memory resources, DSP resources, dedicated I/O, and clock-management circuitry. The Kintex-7 family therefore occupies the high-performance portion of the AMD 7-series FPGA portfolio. The principal device characteristics include 406,720 logic cells, 28 nm process technology, a 1 V core voltage, and a 900-ball lidless FCBGA package. The device uses the -2 speed grade and commercial-temperature ordering code. Its large logic capacity supports parallel datapaths, protocol termination, high-speed interfaces, digital filtering, and control systems, while the 900-ball package supports substantially more I/O than smaller FPGA packages. Kintex-7 devices integrate dedicated hardware for demanding signal-processing and connectivity workloads. Their architecture is suited to designs requiring high-speed serial connectivity, parallel transceiver I/O, substantial on-chip memory, and clocking. The package form factor creates a substantial pin-count routing challenge, so the PCB design must follow the AMD package pinout files, UG475, and the device-specific design guidance for power, decoupling, and ball assignment. Typical uses include 10 Gigabit Ethernet and other networking equipment, server and storage acceleration, industrial video processing, high-speed test equipment, defense-oriented communications systems, and FPGA-based prototyping. For a new Kintex-7 design, engineers should confirm the required speed grade, operating-temperature range, package variant, configuration method, memory interfaces, transceivers, and board-level power budget before finalizing the bill of materials. The most important design consideration is the FBG900 land pattern. This is a complex 900-ball package rather than a leaded component, so PCB escape routing, layer count, via construction, ball-pad dimensions, and assembly capability must be planned together. Decoupling and power distribution should follow the AMD guidance for the selected Kintex-7 device and package instead of relying on generic FPGA assumptions. This page combines package, device, sourcing, and replacement information with practical migration guidance. It also distinguishes true FBG900 drop-in options from devices in different packages, helping engineers avoid a replacement that would require a new PCB footprint or additional design validation.

Permintaan RFG Kontak
XC7K410T-2FFG676C - 400 I/O Kintex-7 FPGA | AMD
XC7K410T-2FFG676C

XC7K410T-2FFG676C - 400 I/O Kintex-7 FPGA | AMD

The AMD XC7K410T-2FFG676C is a Kintex-7 field-programmable gate array (FPGA) with 400 user I/O, a -2 speed grade, and a 676-ball FCBGA package measuring 27 × 27 mm. Designed on a 28 nm process, the device is positioned for high-performance, cost-efficient designs requiring substantial programmable logic and connectivity. A Kintex-7 FPGA is a configurable semiconductor in the FPGA and programmable-logic hierarchy. Unlike a fixed-function application-specific integrated circuit, its digital logic, block resources, and I/O can be configured after manufacture. AMD positions the Kintex-7 family around the balance between logic density, high-speed connectivity, DSP capability, and cost, supporting workloads such as network infrastructure, industrial processing, test equipment, and high-bandwidth signal processing. The XC7K410T-2FFG676C combines 400 user I/O with the -2 performance grade in the 676-ball FCBGA package. The commercial C suffix identifies a commercial-temperature configuration, and cross-reference information identifies its operating range as 0 °C to +85 °C. Its 28 nm implementation is the foundation for the Kintex-7 family's performance-per-watt positioning and supports integration of programmable logic, DSP, memory, and high-speed serial interfaces. The -2 speed grade provides a defined performance class within the Kintex-7 portfolio. Designers should use the AMD datasheet, package pinout files, and UG475 guidance to verify timing constraints, bank voltage compatibility, configuration requirements, pin assignments, and supported interfaces for the exact board revision. Because an FPGA design depends on routing and timing closure rather than a fixed analog performance curve, the final operating frequency and power consumption depend on the implemented logic, utilization, clocking, memory access pattern, I/O activity, and thermal environment. Typical applications include optical transport and packet-processing equipment, industrial automation controllers, high-speed data acquisition, broadcast and communications infrastructure, defense-oriented signal processing, and accelerator prototyping. The 400 available user I/O supports systems combining multiple high-speed interfaces with moderate parallel logic connectivity, while the large logic capacity is appropriate for protocol stacks, datapath processing, DSP pipelines, and control logic. PCB implementation requires careful treatment of the 676-ball package. Follow the AMD package pinout files and UG475 for the exact ball map, and preserve the required power, ground, decoupling, configuration, clock, and high-speed routing requirements. This page combines the confirmed device attributes, documented package alternatives, comparison guidance, and practical design checks needed to evaluate the XC7K410T-2FFG676C before schematic and PCB signoff.

Permintaan RFG Kontak
XC7K410T-2FFG900C - Kintex-7 FPGA 406K Logic Cells | AMD
XC7K410T-2FFG900C

XC7K410T-2FFG900C - Kintex-7 FPGA 406K Logic Cells | AMD

The AMD XC7K410T-2FFG900C is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology. It delivers 406,720 logic cells, 500 user I/O pins, and 29,306,880 bits of block RAM, making it a versatile choice for demanding signal processing and connectivity applications. The device is housed in a 900-ball FCBGA package and operates from a 1V core supply. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain programmable logic blocks, configurable interconnects, and embedded memory that allow the hardware to be reprogrammed to implement arbitrary digital logic functions. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which range from simple CPLDs to massive data center accelerators. The Kintex-7 family specifically targets the balance of price, performance, and power at 28nm, offering high DSP ratios and support for mainstream standards like PCIe Gen3 and 10 Gigabit Ethernet. Key features of the XC7K410T-2FFG900C include 1,540 DSP slices for high-throughput digital signal processing, 500 user I/O pins supporting multiple I/O standards, and 29,306,880 bits of block RAM. The device also integrates hardened memory controllers, high-speed serial transceivers, and clock management tiles (MMCM and PLL) for robust timing. The -2 speed grade provides a balance between performance and power consumption, with a maximum clock frequency of 1286 MHz for internal logic. Architecturally, the Kintex-7 family uses a unified 7 series architecture with configurable logic blocks (CLBs), block RAM, and DSP48E1 slices. The 28nm high-k metal gate (HKMG) process enables high logic density while maintaining reasonable power dissipation. The device supports partial reconfiguration, allowing dynamic updates to specific logic regions without halting the entire system. Typical applications include high-performance computing, aerospace and defense signal processing, medical imaging, and wired/wireless communications infrastructure. The 900-ball FCBGA package provides excellent thermal and electrical characteristics for high-speed designs. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple voltage rails (VCCINT, VCCAUX, VCCO) with proper sequencing, and the FCBGA package benefits from a thermal solution for high-utilization designs.

Permintaan RFG Kontak
XC7K410T-2FFG900I - Kintex-7 FPGA 406K Logic Cells | AMD
XC7K410T-2FFG900I

XC7K410T-2FFG900I - Kintex-7 FPGA 406K Logic Cells | AMD

The AMD XC7K410T-2FFG900I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on the 28nm HPL (High-Performance, Low-Power) HKMG (High-κ Metal Gate) process. It offers 406,720 logic cells, 500 user I/Os, and 29,306,880 bits of block RAM, all housed in a 900-ball FCBGA (FFG900) package. This device is designed for applications requiring high DSP ratios, cost-effective packaging, and support for mainstream standards like PCIe Gen3 and 10 Gigabit Ethernet. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing—hence 'field-programmable'. It consists of an array of programmable logic blocks, interconnects, and I/O blocks that can be programmed to implement complex digital functions. FPGAs are a subset of programmable logic devices (PLDs) and are widely used in prototyping, signal processing, and high-speed interfacing where ASIC development is impractical. Key features of the XC7K410T-2FFG900I include 500 user I/Os, 29,306,880 bits of block RAM, and 1,540 DSP slices (DSP48E1). It supports multiple I/O standards including LVCMOS, LVDS, and HSTL, and includes advanced clock management through MMCM (Mixed-Mode Clock Manager) and PLL (Phase-Locked Loop) blocks. The device also supports partial reconfiguration, enabling dynamic updates to logic functions without powering down. From a technical perspective, the Kintex-7 family balances performance and power efficiency, making it suitable for cost-sensitive, high-volume applications. The -2 speed grade indicates a mid-range performance level, with the 'I' suffix denoting an industrial temperature range (-40°C to +100°C). The FFG900 package provides a 900-ball footprint with a 31x31 mm body, offering excellent thermal and electrical characteristics for high-density designs. Typical applications include software-defined radio, medical imaging, aerospace and defense systems, and high-performance computing. The device's high DSP ratio and support for 10 Gigabit Ethernet make it ideal for communications infrastructure and data acquisition systems. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply rails (VCCINT, VCCAUX, VCCO) and a robust power distribution network. Adequate PCB layout with proper grounding and bypass capacitors is essential for reliable operation at high speeds.

Permintaan RFG Kontak
XC7K420T-1FFG1156C - Kintex-7 FPGA 416K Cells | AMD
XC7K420T-1FFG1156C

XC7K420T-1FFG1156C - Kintex-7 FPGA 416K Cells | AMD

The AMD XC7K420T-1FFG1156C is a high-performance Field Programmable Gate Array (FPGA) from the Kintex-7 family, fabricated on a 28nm process. It features 416,960 logic cells, 32,575 CLBs, and 30,781,440 bits of block RAM, providing substantial resources for complex digital designs. The device is packaged in a 1156-ball FCBGA (FFG1156) with 400 user I/O pins, supporting a wide range of I/O standards. It operates over a commercial temperature range of 0°C to 85°C and is available in a -1 speed grade, offering a balance of performance and power efficiency. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks and interconnects that can be programmed to implement any digital logic function. FPGAs are part of the broader category of programmable logic devices (PLDs), which also includes CPLDs. They are widely used in applications requiring flexibility, rapid prototyping, and parallel processing, such as telecommunications, data centers, and aerospace. Key features of the XC7K420T-1FFG1156C include 400 user I/O pins, 30.7 Mb of block RAM, and support for high-speed serial transceivers (GTX) up to 12.5 Gb/s. The Kintex-7 family is optimized for high performance with lower power consumption compared to previous generations, making it suitable for bandwidth-intensive applications. The device also supports partial reconfiguration, allowing dynamic updates to logic functions without powering down. Technically, the Kintex-7 architecture integrates DSP48E1 slices for high-speed arithmetic, clock management tiles (CMT) for precise clock generation, and advanced I/O blocks supporting various voltage standards. The 28nm high-k metal gate (HKMG) process technology enables high logic density and low static power. The -1 speed grade provides a maximum clock frequency of approximately 1098 MHz, as noted in some datasheets, though actual performance depends on design. Typical applications include wired and wireless communications, broadcast video, aerospace and defense, and high-performance computing. The XC7K420T-1FFG1156C is particularly suited for signal processing, packet processing, and video/image processing where high throughput and low latency are critical. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply voltages (VCCINT, VCCAUX, VCCO) and a well-designed power distribution network to ensure reliable operation. Adequate cooling, such as a heatsink or forced airflow, is necessary to keep junction temperature within limits.

Permintaan RFG Kontak
XC7K420T-2FFG1156I - Kintex-7 FPGA 416K Cells | AMD
XC7K420T-2FFG1156I

XC7K420T-2FFG1156I - Kintex-7 FPGA 416K Cells | AMD

The AMD Xilinx XC7K420T-2FFG1156I is a high-performance Field Programmable Gate Array (FPGA) from the Kintex-7 family, built on advanced 28nm HK-HPC process technology. It delivers 416,960 logic cells and 400 user I/Os in a 1156-pin FC-BGA (FFG1156) package, operating from a nominal 1.0V core supply. This device is designed for high-bandwidth, high-capacity applications requiring significant logic density and DSP throughput. An FPGA (Field Programmable Gate Array) is an integrated circuit that can be configured by the customer or designer after manufacturing. Unlike fixed-function ASICs, FPGAs contain an array of programmable logic blocks, configurable I/O, and routing resources that can be programmed to implement any digital logic function. The Kintex-7 family sits between the cost-optimized Artix-7 and the high-end Virtex-7 in the Xilinx 7-series hierarchy, offering an optimal balance of performance, power, and price for mid-range to high-end applications. Key features of the XC7K420T-2FFG1156I include 32,575 Configurable Logic Blocks (CLBs), 30,781,440 bits of block RAM, and 400 user I/O pins. The -2 speed grade provides fast performance, while the I suffix indicates an industrial temperature range of -40°C to +100°C (TJ). The device supports a wide range of I/O standards including LVCMOS, LVDS, and HSTL, and includes hardened memory controllers, DSP48E1 slices, and high-speed serial transceivers. Architecturally, the Kintex-7 family integrates a 6-input look-up table (LUT) fabric, dedicated carry logic, and distributed RAM. The device includes 1,680 DSP48E1 slices for high-throughput signal processing, and up to 16 high-speed GTX transceivers (depending on package variant) supporting data rates up to 12.5 Gb/s. The 28nm process technology enables high logic density with lower power consumption compared to previous generations. Typical applications include high-performance computing, aerospace and defense signal processing, medical imaging, wired and wireless communications, and video processing. The 400 I/Os and large block RAM make it suitable for memory-intensive designs, while the DSP resources handle complex algorithms. The industrial temperature range extends usability to harsh environments. When designing with this device, careful attention to power supply decoupling and thermal management is essential. The 1.0V core supply requires a robust power delivery network, and the FC-BGA package needs adequate PCB layout for signal integrity at high speeds.

Permintaan RFG Kontak
XC7K420T-2FFG901I - Kintex-7 FPGA, 416K Logic Cells | AMD
XC7K420T-2FFG901I

XC7K420T-2FFG901I - Kintex-7 FPGA, 416K Logic Cells | AMD

The AMD XC7K420T-2FFG901I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the 28nm Kintex-7 family, offering 416,960 logic cells, 380 user I/Os, and 28Mb of block RAM in a 900-ball FCBGA package. It is designed for applications requiring a balance of high logic density, DSP throughput, and serial transceiver performance. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit within the broader hierarchy of programmable logic devices (PLDs), which are semiconductor components that allow hardware designers to implement custom digital circuits without the high non-recurring engineering costs of ASICs. Within this hierarchy, the Kintex-7 family is positioned as AMD's mid-range, price-performance optimized FPGA line, sitting between the low-power Artix-7 and the high-performance Virtex-7 families. Key features of the XC7K420T-2FFG901I include 416,960 logic cells, 380 user I/Os, 30,744,140 bits of block RAM, and 1,680 DSP slices. The device operates from a 1V core supply and is built on a 28nm high-k metal gate (HKMG) process technology. The -2 speed grade provides a balanced performance point, and the I-grade temperature range supports operation from -40°C to +100°C (Tj). The Kintex-7 architecture integrates 16 high-speed serial transceivers (GTX) capable of up to 12.5 Gb/s, along with hardened memory controllers, PCIe blocks, and mixed-mode clock managers (MMCMs) and PLLs. This integration enables the device to serve as a complete system-on-chip solution for high-bandwidth data path applications. Typical applications include high-performance computing, wired and wireless communications, broadcast video, and aerospace and defense systems. The device's combination of logic density, DSP capability, and transceiver speed makes it suitable for software-defined radio, radar signal processing, and high-speed data acquisition. When designing with this device, careful attention must be paid to power supply decoupling and thermal management. The 900-ball FCBGA package requires a robust PCB layout with multiple ground and power planes, and the core voltage must be regulated to 1.0V ±3% to ensure reliable operation.

Permintaan RFG Kontak
XC7K420T-3FFG1156E - Kintex-7 FPGA 416K Logic Cells | AMD
XC7K420T-3FFG1156E

XC7K420T-3FFG1156E - Kintex-7 FPGA 416K Logic Cells | AMD

The AMD XC7K420T-3FFG1156E is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) fabricated on a 28nm process technology. It features 416,960 logic cells, 32,575 Configurable Logic Blocks (CLBs), and 400 user I/O pins. The device is housed in a 1156-ball FCBGA package and operates from a 1V core supply. This FPGA is designed for high-bandwidth, high-capacity applications requiring significant logic density and DSP capabilities. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. FPGAs contain a matrix of programmable logic blocks, interconnects, and I/O blocks, allowing them to implement complex digital logic functions. They are a key component in the broader category of programmable logic devices, which also includes CPLDs and SoC FPGAs. FPGAs offer flexibility and parallel processing capabilities that are essential in modern electronic systems. Key features of the XC7K420T-3FFG1156E include 30,781,440 bits of block RAM, providing substantial on-chip storage for data buffering and processing. The device supports a wide range of I/O standards and includes high-speed serial transceivers for chip-to-chip and backplane communication. The -3 speed grade indicates the fastest performance tier available for this device, enabling higher clock frequencies and data rates. The Kintex-7 family is built on AMD's 28nm high-performance, low-power (HPL) process, balancing performance with power efficiency. The architecture includes dedicated DSP48E1 slices for high-speed arithmetic operations, and advanced clock management tiles (CMTs) for precise clock generation and distribution. This makes the device suitable for demanding signal processing and data-intensive tasks. Typical applications include high-performance computing, aerospace and defense systems, medical imaging, and wired communications infrastructure. The large logic capacity and high-speed transceivers make it ideal for implementing complex algorithms and high-throughput data paths. The 400 I/O pins provide ample connectivity for external memory interfaces and peripheral devices. When designing with this FPGA, careful attention must be paid to power supply decoupling and thermal management. The device requires multiple supply voltages, and proper sequencing is essential for reliable operation. The FCBGA package requires a multi-layer PCB with controlled impedance traces for high-speed signals.

Permintaan RFG Kontak
XC7K480T-1FFG901I - Kintex-7 FPGA 477K Logic Cells | AMD
XC7K480T-1FFG901I

XC7K480T-1FFG901I - Kintex-7 FPGA 477K Logic Cells | AMD

The AMD XC7K480T-1FFG901I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the Kintex-7 family, offering 477,760 logic cells and 35,205,120 block RAM bits in a 900-ball FCBGA package. It provides 380 user I/O pins and operates over an industrial temperature range of -40°C to +100°C. This device is designed for high-bandwidth, high-capacity applications requiring significant logic density and DSP resources. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer or designer after manufacturing. FPGAs are part of the programmable logic device family, sitting between ASICs and CPLDs in complexity. They contain a matrix of configurable logic blocks (CLBs) connected via programmable interconnects, allowing for highly parallel, custom digital logic implementations. FPGAs are used in a wide range of applications from telecommunications and aerospace to automotive and data centers. The XC7K480T-1FFG901I features the Kintex-7 architecture, which balances performance, power, and cost. It includes 1,920 DSP slices for high-speed digital signal processing, 380 user I/Os supporting various I/O standards, and 35.2 Mb of block RAM. The -1 speed grade offers a balanced performance point, while the industrial temperature grade (-I) ensures reliable operation in harsh environments. The device supports configuration through multiple methods including JTAG, master/slave SPI, and SelectMAP. This FPGA is built on a 28nm process technology, providing a good balance of power efficiency and logic density. The 900-ball FCBGA package (FFG901) offers excellent thermal and electrical characteristics for high-performance designs. With 477,760 logic cells, it can implement complex systems-on-chip, including soft-core processors, high-speed serial transceivers, and sophisticated DSP algorithms. Typical applications include high-performance computing, wired and wireless communications, aerospace and defense systems, medical imaging, and broadcast video processing. The device's high logic density and DSP capabilities make it suitable for implementing complex algorithms in hardware. When designing with this FPGA, careful attention must be paid to power supply decoupling, clock management, and thermal management to ensure reliable operation at full capacity.

Permintaan RFG Kontak
XC7K480T-2FFG1156I - Kintex-7 FPGA 477K Logic Cells | AMD
XC7K480T-2FFG1156I

XC7K480T-2FFG1156I - Kintex-7 FPGA 477K Logic Cells | AMD

The AMD XC7K480T-2FFG1156I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the 28nm 7-series family, offering 477,760 logic cells, 400 user I/Os, and 35,205,120 block RAM bits in a 1156-ball FCBGA package. It operates from a 1.0V core supply (0.97V to 1.03V) and supports a maximum clock frequency of 1286 MHz, making it suitable for demanding DSP, communications, and data processing applications. A Field Programmable Gate Array (FPGA) is an integrated circuit whose logic fabric can be reconfigured after manufacturing to implement arbitrary digital logic functions. FPGAs sit between ASICs (fixed-function, high-volume) and microprocessors (software-programmable) in the design spectrum, offering hardware-level parallelism and determinism with field reconfigurability. The Kintex-7 family is optimized for best price-performance, delivering a 2X improvement over the previous generation, enabling a new class of FPGAs for cost-sensitive, high-bandwidth systems. Key features include 400 user I/Os supporting multiple I/O standards, 35,205,120 bits of block RAM for on-chip data storage, and 477,760 logic cells for complex digital designs. The device integrates MMCM (Mixed-Mode Clock Manager) and PLL (Phase-Locked Loop) blocks for robust clock generation and distribution. The 1156-ball FCBGA package provides excellent thermal and electrical performance, with a low-cost, very small form-factor footprint for space-constrained PCBs. Built on 28nm high-k metal gate (HKMG) process technology, the Kintex-7 family balances performance, power, and cost. The -2 speed grade offers a strong trade-off between maximum clock frequency and power consumption. The device supports partial reconfiguration, enabling dynamic updates to logic functions without full device reprogramming, which is valuable in software-defined radio and adaptive computing systems. Typical applications include software-defined radio (SDR), high-performance digital signal processing, wired and wireless communications infrastructure, and data acquisition systems. The 400 I/Os and high logic density make it ideal for protocol bridging, packet processing, and real-time signal conditioning. The 1.0V core supply and 28nm process enable efficient operation in power-sensitive rack-mounted equipment. When designing with this device, ensure adequate decoupling on all power rails (VCCINT, VCCAUX, VCCO) and follow AMD's power-on sequencing requirements. The 1156-ball FCBGA requires careful PCB layout with controlled impedance traces for high-speed transceivers and proper thermal management via a heatsink or forced airflow for high-utilization designs.

Permintaan RFG Kontak
XC7K480T-2FFG901I - Kintex-7 FPGA 477K Logic Cells | AMD
XC7K480T-2FFG901I

XC7K480T-2FFG901I - Kintex-7 FPGA 477K Logic Cells | AMD

The AMD XC7K480T-2FFG901I is a high-performance Kintex-7 Field Programmable Gate Array (FPGA) from the 7 series family, built on 28nm technology. It delivers 477,760 logic cells, 35,205,120 block RAM bits, and 380 user I/Os in a 900-ball FCBGA package. This device is designed for demanding applications requiring high logic density, DSP capability, and high-speed serial transceivers. A Field Programmable Gate Array (FPGA) is an integrated circuit that can be configured by the customer after manufacturing to implement any digital logic function. FPGAs sit within the hierarchy of programmable logic devices, offering more capacity and flexibility than CPLDs, and are used as an alternative to ASICs for prototyping, low-to-mid volume production, and applications requiring field-updatable hardware. The Kintex-7 family balances cost, power, and performance, making it a popular choice for a wide range of systems. Key features of the XC7K480T-2FFG901I include 477,760 logic cells, 35,205,120 bits of block RAM, and 380 user I/Os. It operates at a core voltage of 1V and is available in a 900-pin FCBGA package. The device supports multiple I/O standards, high-speed transceivers, and includes hardened memory controllers and DSP slices for signal processing. The -2 speed grade offers a balance of performance and power. Technically, the Kintex-7 family uses a unified architecture with configurable logic blocks (CLBs), block RAM, DSP48E1 slices, and clock management tiles (CMTs) with MMCM and PLL. The 28nm high-k metal gate (HKMG) process technology enables high performance with lower power compared to previous generations. The device supports partial reconfiguration and advanced clocking, making it suitable for complex, high-bandwidth systems. Typical applications include high-performance computing, wired and wireless communications, aerospace and defense, broadcast, and medical imaging. The high logic density and DSP capability make it ideal for signal processing, packet processing, and video processing. The 380 I/Os and high-speed transceivers enable connectivity to various peripherals and backplanes. When designing with this device, careful attention must be paid to power supply decoupling, thermal management, and signal integrity. The FCBGA package requires a multi-layer PCB with proper via placement and ground planes. Use the AMD Vivado design suite for configuration and implementation.

Permintaan RFG Kontak