Produk (44.000+)

XC9536XL-7VQG64C - 36-Macrocell 3.3V CPLD | AMD
XC9536XL-7VQG64C

XC9536XL-7VQG64C - 36-Macrocell 3.3V CPLD | AMD

AMD XC9536XL-7VQG64C is a 36-macrocell in-system programmable CPLD with 36 I/O, a 7.5 ns maximum pin-to-pin propagation delay, and a 3 V to 3.6 V internal supply range, housed in a 64-pin VTQFP package. The device provides 800 usable gates and a 125 MHz operating frequency within the FastFLASH XC9500XL family. A CPLD, or complex programmable logic device, is a programmable semiconductor that combines nonvolatile configuration memory, logic macrocells, and programmable I/O blocks. The XC9500XL family combines that architecture with in-system programming and IEEE Std 1149.1 JTAG boundary scan. This places the device in the hierarchy of programmable logic devices, alongside FPGAs and PAL-type programmable devices, while retaining a comparatively simple architecture for compact control, interface, and glue-logic designs. Key features include 36 macrocells, 36 user I/O, 800 usable gates, a 125 MHz maximum operating frequency, and 5 ns pin-to-pin logic delays as described for the family. In-system programming supports at least 10,000 program and erase cycles. JTAG boundary scan supports boundary testing, configuration debugging, and design iteration, while the 3.3 V supply range targets low-voltage communications and computing equipment. The XC9536XL architecture drives macrocell outputs directly into programmable I/O blocks, allowing logic functions to be assigned to available package pins through the configuration file. The -7 speed designation identifies the device timing grade associated with the 7.5 ns maximum propagation-delay listing. This grade is appropriate when design timing closes below the rated limit with the selected system clock, external interface, and loading conditions. Typical uses include interface bridging, control logic, state machines, bus decoding, peripheral control, and compact communications equipment. The 36 available I/O make it particularly useful for designs that need moderate parallel connectivity without the resource count and configuration complexity of a larger FPGA. JTAG also makes the device convenient for production programming, board validation, and field debugging. Designers should preserve the CPLD supply decoupling, route programming and JTAG signals carefully, and verify every external pin against the exact 64-pin package drawing. Although its nominal supply is 3.3 V, XC9536XL is not automatically interchangeable with a 5 V XC9536 design because the original family used 5 V I/O, while XC9500XL targets 3.3 V operation. This page combines the manufacturer device characteristics with practical programming, replacement, routing, and compatibility guidance. It also distinguishes speed-grade alternatives that preserve the 36-macrocell, 36-I/O architecture while changing timing or temperature qualification.

Permintaan RFG Kontak
XC9536XL-7VQG64I - 36-Macrocell 3.3V CPLD | AMD/Xilinx
XC9536XL-7VQG64I

XC9536XL-7VQG64I - 36-Macrocell 3.3V CPLD | AMD/Xilinx

The AMD/Xilinx XC9536XL-7VQG64I is a 36-macrocell, 3.3 V in-system-programmable CPLD with 36 user I/O pins, approximately 800 usable gates, and a 64-pin VTQFP package. Its -7 speed designation corresponds to a maximum propagation delay of 7.5 ns, supporting general-purpose glue logic, control logic, interface adaptation, and legacy industrial system designs. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines multiple programmable logic blocks with I/O structures. It occupies the broader hierarchy of programmable logic devices, alongside FPGAs, and is used to implement fixed or configurable digital functions. The XC9500XL architecture provides nonvolatile configuration, in-system programmability, and repeatable programming suitable for established control and interface products. The device provides 36 macrocells, 36 user I/O pins, and about 800 usable gates. Its architecture uses 54V18 function blocks and drives I/O blocks directly from the function-block outputs. In-system programmability supports at least 10,000 program and erase cycles, while enhanced pin-locking capability helps preserve board-level routing assignments during design migration within the XC9500XL family. The XC9500XL family uses 0.35 µm CMOS technology and operates from a 3.0 V to 3.6 V supply range. The XC9536XL-7VQG64I is identified as an industrial-grade variant in a 64-pin VTQFP package. The G package designation denotes a lead-free package, and product listings identify the device as RoHS compliant. Programmable transition behavior permits specified transient overshoot and undershoot during device state changes when the relevant duration and current limits are respected. Typical applications include industrial automation, embedded control, legacy peripheral control, programmable interface logic, board-level glue logic, and system power-sequencing support. Its 36 I/O pins make it useful where several digital lines must be routed among processors, memory devices, sensors, and communications interfaces while retaining a compact, nonvolatile logic implementation. Designers should preserve the device's 3.3 V supply assumptions and verify every signal against the XC9536XL DS058 pin table before PCB release. Use the manufacturer pinout and power-decoupling recommendations, connect the programming interface according to the defined JTAG or boundary-scan arrangement, and validate timing with the speed grade used in the original design. The -7 variant provides a 7.5 ns maximum propagation delay. This page combines the key family-level specifications, practical implementation guidance, same-footprint upgrade paths, and engineering trade-offs for engineers evaluating the XC9536XL-7VQG64I or planning a controlled migration to another XC9536XL speed, package, or temperature option.

Permintaan RFG Kontak
XC9536XV-5VQ44C - 5ns 2.5V CPLD, 44-TQFP | AMD
XC9536XV-5VQ44C

XC9536XV-5VQ44C - 5ns 2.5V CPLD, 44-TQFP | AMD

The AMD XC9536XV-5VQ44C is a 2.5 V complex programmable logic device (CPLD) with 800 usable gates, two 54V18 function blocks, 34 I/O, and a maximum 5 ns pin-to-pin propagation delay, housed in a 44-pin TQFP surface-mount package. It combines in-system programmability, FastFLASH technology, low-power operation, and multi-voltage support for high-performance communications and computing systems. A CPLD is a programmable logic device that combines multiple programmable logic blocks with a deterministic interconnect structure. It occupies the hierarchy above basic programmable logic arrays but below field-programmable gate arrays, providing fixed in-system reconfiguration capability for glue logic, control logic, bus decoding, interface adaptation, and compact state-machine implementation. FastFLASH technology supports convenient configuration and reprogramming, while in-system programmability allows logic updates without removing the device from its circuit. The XC9536XV family provides 800 usable gates across two 54V18 function blocks. Its -5 speed designation corresponds to a 5 ns maximum pin-to-pin logic delay, making it suitable for communications, computing, and embedded control paths with defined timing requirements. The internal core voltage range is 2.37 V to 2.62 V. The device also supports multiple I/O voltage operation, allowing interface compatibility with surrounding system logic when the applicable voltage combinations are observed. The 44-pin package provides 34 usable I/O in the cited configuration and a surface-mount form factor suitable for automated assembly. Programmable functions are divided between two 54V18 blocks, enabling medium-density combinational and sequential logic without the resource overhead of a large FPGA. The architecture is particularly useful for deterministic control paths, peripheral interfacing, data-format conversion, and compact protocol handling where reusability and in-system programming are important. Typical uses include communications interface logic, embedded computing control, bus arbitration, peripheral bridging, and low-latency state-machine implementations. In each case, the device consolidates several small logic functions into one programmable component, reduces discrete gate count, and allows firmware-linked design revisions. A designer can also use the XC9572XV family member when additional logic capacity is needed while retaining the same package and voltage-oriented family platform. Designers should verify the complete pin description, supported I/O standards, configuration pins, and electrical constraints in the manufacturer datasheet before layout release. The package drawing and pin numbering must match the 44-TQFP footprint, while power and ground distribution should follow the datasheet recommendations for reliable signal integrity and predictable device operation. This page combines the XC9536XV device architecture, exact ordering information, practical logic-design guidance, and a parameter-focused comparison with supported same-footprint alternatives. It highlights the engineering trade-offs among speed grades and logic capacities while keeping purchasing, availability, and replacement questions aligned with the Request a Quote process on this page.

Permintaan RFG Kontak
XC9572-10PC44C - 72-Macrocell 5V In-System CPLD | AMD
XC9572-10PC44C

XC9572-10PC44C - 72-Macrocell 5V In-System CPLD | AMD

AMD XC9572-10PC44C is a 72-macrocell, 5 V in-system programmable complex programmable logic device (CPLD) in a 44-pin PLCC package. It provides approximately 1,600 usable logic gates, 34 user I/O pins, 10 ns-class propagation delay, and operation from 4.5 V to 5.5 V. The device uses advanced CMOS 5 V FastFLASH technology and supports parallel programming of multiple XC9500-family devices. A CPLD is a programmable logic device that combines multiple logic functions into one integrated circuit. Its architecture is organized into interconnected function blocks and macrocells, allowing relatively compact logic designs to replace multiple programmable logic devices and discrete glue logic. In the broader semiconductor hierarchy, the XC9572 is a complex programmable logic device within the FPGA and CPLD category, and its in-system programming capability supports configuration without removing the package from a circuit board. Important features include 72 macrocells, approximately 1,600 usable gates, 34 I/O pins, and a nominal 5 ns pin-to-pin logic-delay class for the broader family. The XC9572-10PC44C speed designation identifies a 10 ns-class device. Its FastFLASH configuration memory is specified for at least 10,000 program-and-erase cycles, while in-system programmability enables manufacturing, test, and field-update workflows that would be impractical with conventional fuse-programmed PLDs. The device is divided into four function blocks, each containing 18 macrocells. This partitioning gives the designer a view of the logic architecture while retaining a unified package and pin assignment. The 5 V technology supports systems that already operate at 5 V, reducing the need for level conversion between legacy peripheral logic and the CPLD. The 44-pin PLCC package is also associated with lead-containing legacy construction, so new RoHS-restricted designs should verify compliance and sourcing requirements before production release. Typical applications include legacy industrial control, test-and-measurement equipment, printer and peripheral controllers, board-level glue logic, embedded system interfaces, and general-purpose in-system programmable control logic. Its 34 I/O pins make it useful for designs requiring moderate I/O density rather than very high logic capacity, and its 10 ns timing class can address control, decoding, state-machine, and interface functions that do not require modern FPGA speeds. The principal design considerations are 5 V signal compatibility, pin assignment stability, programming-tool compatibility, and legacy-package availability. Confirm the pinout and programming interface in the DS065 datasheet before schematic capture, and validate every external pull-up, pull-down, and termination resistor against the board-level interface requirements. For new production programs, verify the exact suffix, temperature grade, sourcing plan, and applicable environmental compliance. This page combines the XC9572 architecture, pin and programming guidance, lifecycle-related sourcing considerations, and a qualified drop-in assessment. Because the XC9500 family is a legacy 5 V platform and the verified cross-reference information identifies no exact cross-vendor replacement, engineers should treat device reuse and supply planning as separate decisions rather than assume that an equivalent PLCC CPLD is electrically interchangeable.

Permintaan RFG Kontak
XC9572-10PC44I - 72-Macrocell 5V CPLD | AMD
XC9572-10PC44I

XC9572-10PC44I - 72-Macrocell 5V CPLD | AMD

The AMD XC9572-10PC44I is a 72-macrocell in-system-programmable CPLD built with 0.5 µm Advanced CMOS 5V Fast FLASH technology, providing 1,600 usable gates, 34 user I/O, and a 44-pin PLCC package. Its 10 ns speed grade delivers a 7.5 ns pin-to-pin logic delay and a maximum system clock frequency of 66.7 MHz. The industrial-temperature option operates from -40°C to 85°C. A complex programmable logic device, or CPLD, combines a user-programmable architecture with nonvolatile configuration memory for deterministic logic implementation. The XC9500 family belongs to the broader FPGA and CPLD hierarchy, while the XC9572 device provides 72 macrocells arranged in eight 36V18 function blocks. This architecture is useful when control logic requires repeatable routing, in-system reconfiguration, and fast implementation without using a mask-programmed ASIC. Key features include 34 user I/O, 72 macrocells, 1,600 usable gates, and 10,000-cycle minimum in-system programming endurance. The device accepts a 4.5 V to 5.5 V supply range and supports a nominal 5 V operating point. Parallel programming allows multiple XC9500 devices to be programmed together, helping shorten production programming cycles for multi-device boards. The device is based on Advanced CMOS 5V Fast FLASH technology and divides its logic into eight 36V18 function blocks. A stated 7.5 ns pin-to-pin delay makes it appropriate for control, address decoding, interface translation, and fixed-format logic where the design does not require the routing flexibility or performance of a modern FPGA. The 44-pin PLCC package also supports through-hole board assembly and socket-based prototype interchange. Typical uses include industrial control interfaces, legacy peripheral emulation, test-fixture sequencing, programmable interface logic, and board-level glue logic. The 34 I/O count is suitable for moderate control and communication interfaces, while 72 macrocells support Boolean equations, state machines, counters, address decoding, and protocol front ends. Its 5 V supply and industrial temperature range distinguish it from lower-voltage or commercial-temperature programmable-logic families. Designers should assign I/O voltage and drive requirements before laying out the board, follow the DS065 pin-description table for every PLCC connection, and verify that the connected bus timing fits the 10 ns speed grade. The in-system programming pins, power rails, decoupling, and test requirements must be implemented exactly as described in the manufacturer data sheet; poor programming-signal routing can prevent reliable configuration. This product summary consolidates the XC9572-10PC44I electrical characteristics, package information, programming capabilities, selection trade-offs, and practical replacement guidance into an engineering-focused reference for maintaining or redesigning 5 V CPLD-based systems.

Permintaan RFG Kontak
XC9572-10PC84C - 72-Macrocell 5ns In-System CPLD | AMD Xilinx
XC9572-10PC84C

XC9572-10PC84C - 72-Macrocell 5ns In-System CPLD | AMD Xilinx

The AMD Xilinx XC9572-10PC84C is an in-system programmable complex programmable logic device with 72 macrocells, 69 I/O, and 1,600 usable gates. The -10 speed grade provides 5 ns pin-to-pin logic delays, while the device uses advanced 0.5 µm CMOS 5 V FastFLASH technology in an 84-pin plastic leaded chip carrier package. It operates from a 4.75 V to 5.25 V supply for commercial-temperature applications. A complex programmable logic device, or CPLD, is a programmable logic semiconductor that combines macrocell-based logic, programmable interconnect, and user I/O in one package. XC9500-family CPLDs occupy the hierarchy between simple programmable logic devices and larger FPGAs. Their nonvolatile FastFLASH configuration retains the implemented logic after power is removed, while in-system programming allows a programmed design to be updated through dedicated programming pins. Key features include 72 macrocells, 1,600 usable gates, 69 I/O, and a minimum of 10,000 program or erase cycles. Four 36V18 function blocks implement the device architecture, and parallel programming permits multiple XC9500 devices to be programmed simultaneously. The 5 ns pin-to-pin delay is the principal timing figure associated with the -10 speed grade, whereas 7.5 ns is also listed for the family’s product specification. The XC9572 architecture is suitable for general-purpose logic integration where deterministic combinational and registered functions must be implemented without an external configuration memory. Its nonvolatile programmable structure simplifies deployment in control logic, interface conditioning, protocol conversion, legacy bus arbitration, and board-level glue logic. The 69 available I/O support connections among external digital devices and internal macrocell logic. Typical applications include industrial controller interfaces, printer and peripheral control, legacy bus adapters, embedded test logic, programmable logic interfaces, and compact system-support functions. Parallel programming is particularly useful when several XC9500 devices occupy one board and must receive configuration data efficiently during manufacturing or field updates. Designers should use the AMD DS065 datasheet when assigning pins and checking the 84-pin PLCC footprint. The device requires a 4.75 V to 5.25 V core supply, and its nonvolatile FastFLASH programming architecture should be considered when designing the programming interface. PCB layouts must preserve access to all configuration pins and provide adequate clearance around the J-bend package terminals. This page consolidates the XC9572 architecture, package and environmental characteristics, programming facts, and verified comparison references into an engineering-focused guide. It also distinguishes the directly usable XC9572-10PCG84C comparison from functional CPLDs that do not share a verified pin-compatible footprint, helping engineers avoid unnecessary PCB redesign work.

Permintaan RFG Kontak
XC9572-10PC84I - 72-Macrocell 10ns 5V CPLD | Xilinx
XC9572-10PC84I

XC9572-10PC84I - 72-Macrocell 10ns 5V CPLD | Xilinx

The Xilinx XC9572-10PC84I is an in-system programmable complex programmable logic device with 72 macrocells, 1,600 usable gates, 69 user I/O pins, and a 10 ns propagation-delay grade in an 84-pin PLCC package. It operates from a 4.5 V to 5.5 V supply and supports a 7.5 ns pin-to-pin delay with fCNT up to 125 MHz. A CPLD is a programmable-logic device that converts Boolean equations and state-machine descriptions into a configurable digital circuit. Positioned within the FPGA and CPLD category, it provides deterministic combinational and registered logic through a nonvolatile Flash architecture. Unlike a mask-programmed custom ASIC, a CPLD allows logic changes to be programmed or reprogrammed after manufacture, shortening product-development and field-update cycles. The XC9572 provides 72 macrocells, approximately 1,600 usable gates, and up to 72 user I/O positions according to the family-level product specification. Its 5 V in-system programming interface supports a minimum of 10,000 program-and-erase cycles. Parallel programming of multiple XC9500 devices is also supported, making the device suitable for replicated or coordinated logic sections within larger 5 V systems. The -10 speed grade corresponds to a nominal 10 ns propagation-delay class, while the family is specified for a 7.5 ns pin-to-pin delay on all pins and fCNT operation to 125 MHz. The device uses Advanced CMOS 5V Fast FLASH technology and provides a deterministic architecture suited to control logic, interface decoding, bus arbitration, state machines, and legacy peripheral emulation. Typical applications include industrial control, test and measurement equipment, printer and display controllers, embedded system glue logic, and peripheral compatibility designs. Its 69 I/O pins provide substantial connectivity for parallel buses and multi-bit interfaces, while 5 V operation supports systems that already use 5 V CMOS logic. When designing around this legacy CPLD, verify all 84 package positions against the DS065 pin-description tables and confirm that 5 V signal levels do not exceed the device limits. A replacement program should also verify timing, ISP behavior, pin assignment, and industrial temperature requirements rather than relying only on package dimensions. This product page combines the device specifications, package constraints, practical logic-design guidance, and same-family replacement options to support legacy CPLD design reviews, maintenance programs, and controlled board-level modernization.

Permintaan RFG Kontak
XC9572-10PQ100C - 10 ns 72-Macrocells CPLD | AMD Xilinx
XC9572-10PQ100C

XC9572-10PQ100C - 10 ns 72-Macrocells CPLD | AMD Xilinx

The AMD Xilinx XC9572-10PQ100C is a 72-macrocells complex programmable logic device (CPLD) with 1,600 usable gates, 72 user I/O pins, and a maximum propagation delay of 10 ns, housed in a 100-pin plastic quad flat package. The device uses advanced in-system programmability and is designed for general-purpose logic integration where deterministic timing, flexible pin assignment, and field reconfiguration are valuable. A CPLD is a programmable logic device that combines programmable logic arrays, a programmable interconnect, and configuration memory into one integrated circuit. In the product hierarchy, the XC9572 belongs to the complex programmable logic device family, which sits between simple programmable logic devices and larger FPGAs. CPLDs are commonly used for control logic, interface adaptation, state machines, bus arbitration, and glue-logic functions. The XC9500 architecture provides four 54V18 function blocks, 72 macrocells, 1,600 usable gates, and 72 user I/O pins. Its in-system programming capability allows a system to be configured or updated without removing the device from the circuit. The -10 speed designation corresponds to a maximum propagation delay of 10 ns, while the commercial temperature grade is identified in the product listings. The XC9572-10PQ100C is suitable for designs requiring moderate logic density and fast control-path decisions rather than large FPGA fabric. Its 100-pin PQFP package provides a conventional gull-wing lead arrangement and is useful for prototype boards, industrial control systems, communications equipment, instrumentation, and legacy equipment upgrades. The device also supports at least 10,000 program and erase cycles for applications that require repeated in-system reconfiguration. Typical uses include peripheral interfacing, bus decoding, machine-control sequencing, test instrumentation, embedded system glue logic, and communications control functions. In these applications, the CPLD can consolidate multiple fixed-function gates into one programmable device while preserving a straightforward package and deterministic logic implementation. Designers should treat the 10 ns propagation delay as a timing requirement rather than a complete system timing budget. External clock, setup, hold, output loading, and interconnect requirements must be evaluated in the implementation environment. Confirm the pin assignment, power requirements, and supported programming device before committing a new PCB layout. This product summary combines the manufacturer's XC9572 data sheet with distributor and cross-reference information to provide practical guidance for sourcing, comparison, and design review. It highlights the device's macrocell capacity, I/O availability, timing grade, package, and in-system programming characteristics.

Permintaan RFG Kontak
XC9572-15PC44C - 72-Macrocell 5V CPLD | AMD PLCC
XC9572-15PC44C

XC9572-15PC44C - 72-Macrocell 5V CPLD | AMD PLCC

The AMD XC9572-15PC44C is a 72-macrocell in-system programmable complex programmable logic device with 34 user I/O pins, approximately 1,600 gates, and a 15 ns speed grade in a 44-pin PLCC package. It operates from a 4.75 V to 5.25 V internal supply and is based on Advanced CMOS 5 V FastFLASH technology. A CPLD is a programmable-logic semiconductor that combines a structured array of logic macrocells with a nonvolatile configuration memory. In the hierarchy of programmable devices, a CPLD sits between simple programmable logic arrays and more complex FPGAs: unlike mask-programmed logic, it can be configured after manufacture, while unlike most FPGAs it typically provides predictable routing and timing across its macrocell architecture. This makes the XC9500 family useful for consolidating fixed control, interface, and glue logic into one package. The XC9572 provides four logic-element blocks, 72 macrocells, and 34 user I/O pins. Its -15 designation corresponds to a 15 ns maximum propagation-delay class, while the product data also identifies the family as supporting parallel programming of multiple XC9500 devices. In-system programmability permits configuration through the same board connectors used by the finished system, reducing assembly work compared with separately programmed nonvolatile memory. Advanced CMOS 5 V FastFLASH technology stores the configuration nonvolatily and supports at least 10,000 program/erase cycles according to the retrieved specifications. The 5 V supply requirement and 44-pin J-lead PLCC construction distinguish this device from modern low-voltage, fine-pitch FPGA packages. That package is intended for legacy and maintenance-oriented industrial hardware rather than new compact portable products. Typical uses include industrial control logic, legacy interface adapters, programmable test fixtures, and board-level control systems where 34 I/O pins and deterministic logic blocks are more useful than a large general-purpose FPGA. Existing XC9500 designs can also retain the same configuration ecosystem while reducing the number of separate logic devices. The primary design consideration is package and supply continuity. The 44-pin PLCC footprint is not a modern board-standard land pattern, and the XC9500 family is legacy technology that is not recommended for new hardware designs. Engineers should preserve the existing footprint, verify timing at the required voltage and temperature, and plan configuration-cable, programming-software, and obsolescence continuity before committing to production quantities. This page consolidates the verified device specifications, manufacturer datasheet identity, distributor availability links, legacy-family context, and qualified drop-in comparison points so engineers can distinguish genuine replacements from parts that merely share the broad CPLD category.

Permintaan RFG Kontak
XC9572-15PC44I - 72-Macrocell 15 ns CPLD | Xilinx
XC9572-15PC44I

XC9572-15PC44I - 72-Macrocell 15 ns CPLD | Xilinx

Xilinx Inc. XC9572-15PC44I is an Advanced CMOS 5 V Fast FLASH in-system programmable CPLD with 72 macrocells, 34 I/O lines, and a 15 ns speed grade in a 44-LCC J-lead package. The device supports parallel programming of multiple XC9500 devices and is specified for industrial-temperature operation. According to the manufacturer data sheet, the XC9500 family provides 5 ns pin-to-pin logic delays and counting frequencies up to 125 MHz across its available density and speed grades. A CPLD, or complex programmable logic device, is a user-programmable semiconductor that combines programmable logic structures with configuration memory. Within the programmable-logic hierarchy, a CPLD sits between simple programmable logic arrays and higher-capacity FPGAs. The XC9500 family uses Fast FLASH architecture to retain configuration data and support in-system programming, allowing logic designs to be loaded or updated without removing the device from a circuit. The XC9572-15PC44I provides 72 macrocells and 34 I/O lines, making it suitable for consolidating control logic, interface adaptation, state machines, and fixed protocol functions. Its 15 ns speed designation identifies the timing grade, while the family-level 5 ns pin-to-pin delay provides a basis for high-speed signal-path implementation. Fast FLASH technology and parallel programming support also simplify multi-device configuration or manufacturing workflows. The XC9500 architecture is organized around macrocells connected through a programmable switch matrix. Each I/O can be assigned appropriate logic or I/O functions, allowing a single device to replace multiple conventional logic devices. Because configuration is nonvolatile, the programmed behavior remains available after power is removed without requiring configuration SRAM to be refreshed by an external controller. Typical applications include industrial control logic, instrumentation, communications interface logic, test equipment, embedded systems, and legacy peripheral expansion. The industrial temperature grade is appropriate for controlled industrial equipment, while the 44-LCC package offers a through-hole-compatible option for systems assembled with leaded components rather than fine-pitch surface-mount packages. When replacing this CPLD, verify the package pinout, macrocell density, I/O voltage, temperature grade, and timing grade before substitution. Faster speed-grade variants may provide timing margin, but they can change power characteristics and should not be assumed equivalent without design-level timing review. This page consolidates verified manufacturer specifications, distributor availability, same-family drop-in candidates, pricing status, pinout availability, and practical replacement guidance. It separates confirmed XC9572-15PC44I data from family-level limits and identifies missing commercial and mechanical details rather than estimating them.

Permintaan RFG Kontak
XC9572-15PC84I - 72-Macrocell 15 ns CPLD | AMD Xilinx
XC9572-15PC84I

XC9572-15PC84I - 72-Macrocell 15 ns CPLD | AMD Xilinx

AMD Xilinx XC9572-15PC84I is a 72-macrocell in-system programmable complex programmable logic device (CPLD) in an 84-pin PLCC package. It operates from a 5 V supply, offers a 15 ns speed grade, and provides 1,600 usable gates for general-purpose logic integration. The industrial-temperature option is specified for an ambient range of -40°C to +85°C. A CPLD is a programmable-logic semiconductor that combines programmable AND/OR-style logic structures with configuration memory and I/O resources. The XC9572 belongs to the XC9500 5 V CPLD family, positioned between fixed logic and larger FPGAs. Its role in an electronics hierarchy is programmable logic device → CPLD → semiconductor, while its applications commonly include legacy control, interface, decoding, and glue-logic functions. Key features include Advanced CMOS 5 V Fast FLASH technology, in-system programming, parallel programming of multiple XC9500 devices, and fast pin-to-pin logic delays. According to the XC9500 family material, the family supports pin-to-pin delays as low as 5 ns and fCNT operation up to 125 MHz. These figures describe family capabilities; the XC9572-15PC84I carries the slower 15 ns grade designation. The XC9572 architecture contains 72 macrocells and 1,600 usable gates. Its FLASH-based configuration memory retains the programmed logic after power is removed, allowing field configuration through the in-system programming interface. Compared with mask-programmed logic, this makes the device suitable for prototypes, production runs with small volume changes, and board-level control logic that must be revised without changing the PCB artwork. Typical applications include industrial controller glue logic, peripheral interfacing, legacy bus decoding, data acquisition systems, embedded control, and general-purpose logic consolidation. The 84-pin PLCC package also supports socketed prototyping and repair workflows, while the industrial temperature grade supports equipment operating across the stated -40°C to +85°C ambient range. Designers should verify signal timing against the 15 ns grade, preserve required power and ground connections, and follow the DS065 programming and test guidance. Because this legacy device has been discontinued by the manufacturer, long-lived production programs should include lifecycle risk review, controlled inventory planning, and an approved redesign path. This page combines the manufacturer DS065 specification details, package and lifecycle information, verified alternatives, and practical design guidance. It is intended to help engineers determine compatibility, understand timing constraints, and plan a sensible replacement or redesign strategy for this discontinued programmable-logic device.

Permintaan RFG Kontak
XC9572-15PCG84C - 72-Macrocell 15 ns CPLD | AMD | PLCC-84
XC9572-15PCG84C

XC9572-15PCG84C - 72-Macrocell 15 ns CPLD | AMD | PLCC-84

The AMD XC9572-15PCG84C is a 72-macrocell, in-system-programmable CPLD with 1,600 usable logic gates, 69 I/O lines, and a 15 ns speed grade in an 84-lead PLCC package. It is designed for general-purpose logic integration where deterministic timing, field programmability, and a 5.25 V maximum supply voltage are important. The device belongs to the XC9500 CPLD family and uses FastFLASH technology for in-system programming and test. A CPLD, or Complex Programmable Logic Device, is a programmable-logic semiconductor positioned between simple fixed-function gates and larger FPGAs. Its internal architecture uses interconnected macrocells and a programmable interconnect to implement Boolean equations, state machines, interface logic, counters, and control functions. Within the broader programmable-logic hierarchy, the XC9572 sits as a compact CPLD: simpler to configure than an FPGA while providing flexible, nonvolatile in-system programmability for general-purpose logic consolidation. The XC9572 contains four 36V18 function blocks and 72 macrocells, providing 1,600 usable gates for moderate-density control logic. Its 69 user I/O pins support connection to external memories, interfaces, counters, and control peripherals. The 15 ns speed grade makes it useful when the design requires faster switching than slower legacy CPLD grades. The part also supports in-system programming and test, allowing configuration or functional updates without removing the device from its assembled circuit. The device is manufactured in advanced CMOS and operates from a nominal 5 V supply with a maximum supply voltage of 5.25 V. The commercial-temperature XC9572-15PCG84C is specified for 0 °C to 70 °C. Its 84-lead J-bend PLCC package has a stated size of 29.3116 mm by 29.3116 mm by 5.08 mm. The architecture is based on the XC9500 family’s FastFLASH technology and supports parallel programming of multiple XC9500 devices when system-level configuration requirements demand it. Typical applications include industrial control and sequencing, legacy peripheral interfacing, data-acquisition logic, display-control functions, embedded bus arbitration, and board-level glue logic. The 69 available I/O lines make it especially useful when consolidating several asynchronous control functions into one programmable device. It can also serve as a companion logic device beside processors, microcontrollers, FPGAs, or memory devices when a small amount of deterministic support logic is required. Designers should preserve the PLCC footprint when considering a replacement and verify pin assignments, voltage limits, and temperature grade before substitution. The package has 84 terminals, but the exact terminal names are not reproduced here; use the XC9572 In-system Programmable CPLD Data Sheet, DS065, when assigning PCB tracks and programming pins. Commercial availability should be confirmed through the Request a Quote form because this is a legacy programmable-logic device.

Permintaan RFG Kontak
XC9572-7PC44C - 72-Macrocell 5V CPLD | AMD | PLCC-44
XC9572-7PC44C

XC9572-7PC44C - 72-Macrocell 5V CPLD | AMD | PLCC-44

AMD XC9572-7PC44C is a high-performance 5 V CPLD providing 72 macrocells, approximately 1.6K logic gates, and an 83.3 MHz maximum device frequency in a 44-lead PLCC package. The device uses 0.5 µm Advanced CMOS technology and supports 5 ns pin-to-pin logic delays, making it suitable for general-purpose logic integration, industrial automation, telecommunications infrastructure, and consumer electronics. A CPLD, or Complex Programmable Logic Device, is a user-programmable digital semiconductor that combines a programmable logic array with nonvolatile configuration memory. Its position in the broader hierarchy is programmable logic → programmable logic device → CPLD → configurable logic array. Unlike a mask-programmed logic device, a CPLD can be configured after manufacture, allowing the same board design to accommodate revised logic, production testing, and field updates. The XC9572-7PC44C provides 72 macrocells, approximately 1.6K gates, and a 5 ns speed grade. It uses FastFLASH configuration technology, supports in-system programming, and allows parallel programming of multiple XC9500 devices. The documented operating supply range is 4.75 V to 5.25 V, making the part appropriate for legacy 5 V logic systems rather than low-voltage designs operating directly from 3.3 V. The device combines 72 dedicated macrocells with a programmable interconnect. Each macrocell can implement registered or combinational logic, while the interconnect routes signals between macrocells and package pins. A 5 ns pin-to-pin delay supports designs requiring predictable combinational timing, while the -7 speed grade corresponds to the reported 83.3 MHz maximum frequency. These figures are device-level characteristics; actual system timing must also account for external setup time, clock skew, interconnect delays, and output loading. Typical uses include industrial control logic, telecommunications interface logic, test equipment, embedded control support, and consumer products. The 44-lead PLCC package supports surface mounting and can be useful where a socketed prototype or field replacement is desired. Its nonvolatile configuration storage allows the programmed logic to remain available after power removal without continuously rewriting the device. Designers should verify every unused PLCC pin, programming-interface connection, supply decoupling, and I/O voltage relationship against the manufacturer datasheet. The specified internal supply range is only 4.75 V to 5.25 V. External I/O voltage must not exceed VCCINT by more than the documented 4.0 V limit, and transient overshoot and undershoot must remain within the stated absolute-maximum conditions. This page combines verified device specifications, distributor and manufacturer source links, same-family replacement analysis, parameter comparisons, and practical CPLD design guidance. The alternatives are restricted to same-package, pin-compatible candidates; unavailable pricing, pin-level details, and certification fields are explicitly identified rather than inferred from unrelated records.

Permintaan RFG Kontak
XC9572-7PC84C - 72-Macrocell 5V CPLD | AMD | PLCC-84
XC9572-7PC84C

XC9572-7PC84C - 72-Macrocell 5V CPLD | AMD | PLCC-84

The AMD XC9572-7PC84C is a 72-macrocell, 5 V in-system-programmable complex programmable logic device with 7.5 ns pin-to-pin logic delay, a maximum fCNT of 125 MHz, and an 84-lead PLCC package. The device provides 1,600 usable gates and up to 72 user I/O pins, while one distributor specification identifies 69 I/O pins for this exact orderable MPN. A CPLD is a programmable logic device that sits between fixed-function logic and an FPGA in the broader semiconductor hierarchy. Its nonvolatile architecture retains a programmed logic configuration after power removal, while its macrocell structure and in-system programming interface support practical field configuration, testing, and design migration. The XC9572 belongs to the XC9500 5 V CPLD family and uses Advanced CMOS 5V Fast FLASH technology. Key features include 72 macrocells, 1,600 usable gates, 7.5 ns pin-to-pin delay, operation to 125 MHz, 5 V in-system programming, and a stated programming endurance of at least 10,000 program or erase cycles. The family also supports parallel programming of multiple XC9500 devices. These characteristics make the XC9572 appropriate for consolidating medium-complexity control logic, interface decoding, state machines, and legacy glue logic. The XC9572-7PC84C is identified as a commercial-grade 84-terminal J-bend device in an 84-lead LCC package. The -7 speed designation corresponds to the verified 7.5 ns pin-to-pin delay, while the C suffix denotes the commercial ordering variant. Because this is a 5 V architecture, system designers must verify every attached signal against the device's input thresholds and supply requirements rather than treating it as a modern 3.3 V or 1.8 V CPLD. Typical applications include industrial control systems, legacy peripheral interfaces, programmable logic replacement, instrumentation, and compact control boards requiring nonvolatile logic with in-system reconfiguration. It is especially relevant where a small amount of moderate logic must be consolidated without moving the design to a larger FPGA. Its 84-lead PLCC footprint also supports migration among compatible XC9500 devices when macrocell count, timing, and pin assignment remain acceptable. The principal design consideration is compatibility with the original XC9500 implementation. Engineers should preserve the target's power architecture, verify every pin against the XC9572 package data, and confirm that the design meets the 7.5 ns timing requirement. The XC9572 is identified as RoHS non-compliant and contains lead, so new regulated production designs should require an explicit lifecycle and environmental review before procurement. This page consolidates verified manufacturer and distributor information, drop-in same-family options, parameter comparisons, and practical migration guidance. The alternatives and application passages are intentionally limited to package-compatible XC9500-family choices supported by the supplied evidence, avoiding unrelated FPGA replacements that would require redesign.

Permintaan RFG Kontak
XC9572-7PQ100C - 72-Macrocell 7.5 ns CPLD | AMD Xilinx
XC9572-7PQ100C

XC9572-7PQ100C - 72-Macrocell 7.5 ns CPLD | AMD Xilinx

AMD Xilinx XC9572-7PQ100C is a 72-macrocell, 5 V in-system programmable complex programmable logic device in a 100-pin QFP package. It provides 72 I/O, 1,600 usable gates, a maximum pin-to-pin delay of 7.5 ns, and a stated fCNT of up to 125 MHz. The device uses Advanced CMOS 5V FastFLASHTM technology, supports parallel programming of multiple XC9500 devices, and provides at least 10,000 program/erase cycles. A CPLD is a configurable logic device that combines macrocell-based programmable logic, user-programmable interconnect, and nonvolatile configuration memory. Within the product hierarchy, the XC9572-7PQ100C is a CPLD, a member of the XC9500 programmable logic family, and a 5 V logic semiconductor intended for general-purpose logic integration. Its in-system programmability permits configuration through the assembled PCB rather than requiring a separate programming operation before insertion. Key features include 72 macrocells, 72 I/O, four function blocks, 1,600 gates, and pin-to-pin logic delays specified down to 7.5 ns for this speed grade. The flexible 36V18 function block allows 90 product terms to drive any or all 18 macrocells within each block. The device also supports enhanced pin locking and programming over the full commercial voltage and temperature range. The Advanced CMOS 5V FastFLASHTM architecture provides a practical combination of nonvolatile configuration storage, predictable logic performance, and repeatable in-system programming. A system designer can use the CPLD for interface translation, control logic, bus arbitration, state-machine implementation, glue logic, and prototype logic consolidation. The 100-pin package provides more I/O than smaller XC9500 packages while retaining a conventional surface-mount form factor. Typical applications include industrial control systems, instrumentation interfaces, communications equipment, test and measurement products, and embedded control platforms. It is particularly useful when a design requires frequent field updates, nonvolatile configuration retention, or a compact replacement for multiple individually packaged logic elements. When designing around the XC9572-7PQ100C, verify the 4.75 V to 5.25 V internal supply range, respect the commercial temperature and timing limits, and confirm the exact 100-pin footprint and signal assignments against the manufacturer datasheet. Programming-file generation and device programming must also use tools supporting the legacy XC9500 architecture.

Permintaan RFG Kontak
XC9572-7PQG100C - 72-Macrocell 5V ISP CPLD | AMD | TQFP-100
XC9572-7PQG100C

XC9572-7PQG100C - 72-Macrocell 5V ISP CPLD | AMD | TQFP-100

The AMD XC9572-7PQG100C is a 72-macrocell, in-system-programmable complex programmable logic device (CPLD) with 72 user I/O pins and 1,600 usable gates. The -7 speed grade provides a 7.5 ns pin-to-pin logic delay and supports operation up to 125 MHz. It is packaged in a 100-pin TQFP and uses 5 V in-system programming with a stated endurance of at least 10,000 program-and-erase cycles. A CPLD is a programmable-logic semiconductor that combines a structured array of macrocells with programmable interconnect resources. Within the broader hierarchy, this device belongs to the CPLD and programmable-logic-device class, then to the XC9500 family of Flash-based, in-system-programmable logic devices. Its deterministic architecture is useful when a design requires more integration than discrete programmable logic arrays while retaining nonvolatile configuration, field update capability, and a relatively simple development flow. The XC9572 provides 72 macrocells, 72 user I/O pins, and 1,600 usable gates. The four-function-block architecture divides the device into 36 function blocks, allowing general-purpose logic integration with a fixed, regular structure. Its 7.5 ns pin-to-pin delay defines the advertised speed grade, while the 125 MHz maximum frequency is useful for designs combining logic functions with clocked or registered operations. In-system programming allows the configuration memory to be programmed through the device's programming interface while it is mounted on a PCB. The Flash-based implementation supports at least 10,000 program-and-erase cycles, making field reconfiguration and production programming practical. The commercial temperature grade is identified by the C suffix, while the G designation is associated with the lead-free, RoHS-compliant ordering configuration. Typical uses include interface control, bus arbitration, legacy peripheral glue logic, industrial control modules, test fixtures, and board-level logic consolidation. The 72 I/O pins provide substantial connectivity for control signals, status flags, and parallel buses, while the 72 macrocells allow multiple concurrent Boolean functions to be consolidated into one programmable device. PCB design should account for the 100-pin TQFP footprint, programming signals, supply decoupling, and the I/O-drive requirements of every connected interface. Use the manufacturer's pin-description table when assigning package pins and verify whether external pull-up, pull-down, termination, or interface-level protection is required. Programming-tool compatibility should be confirmed for the specific cable and device algorithm before committing to production hardware. This page combines the manufacturer data-sheet identity, practical CPLD design guidance, package details, and verified same-family replacement options. It also distinguishes speed-grade and temperature-grade alternatives, helping engineers choose a pin-compatible device without overlooking timing or operating-temperature differences.

Permintaan RFG Kontak
XC9572-7TQ100C - 72-Macrocell 5V CPLD | AMD | Industrial Control
XC9572-7TQ100C

XC9572-7TQ100C - 72-Macrocell 5V CPLD | AMD | Industrial Control

AMD XC9572-7TQ100C is a 72-macrocell, 5 V in-system programmable CPLD with 72 I/O, a 7.5 ns maximum pin-to-pin propagation delay, and a 100-pin TQFP package. It belongs to the XC9500 family and uses Advanced CMOS 5 V FastFLASH technology. The device provides a practical combination of logic density, deterministic timing, and field programmability for legacy control, interface, and glue-logic designs. A complex programmable logic device, or CPLD, is a user-programmable semiconductor that combines AND-OR logic structures with nonvolatile configuration memory. The XC9500 architecture organizes its logic into macrocells, each supporting programmable interconnect and registered or combinational functions. The XC9572 provides 72 macrocells and 72 I/O, making it suitable for consolidating multiple fixed-function gates, control registers, address decoding, and peripheral interfaces onto one device. The -7 speed grade specifies a maximum propagation delay of 7.5 ns, while the family is also described as supporting 5 ns pin-to-pin logic delays and a maximum counter frequency of 125 MHz. In-system programmability allows the configuration to be updated without removing the device from the circuit, and the architecture supports at least 10,000 program and erase cycles. Parallel programming can also update multiple XC9500 devices concurrently. The XC9572 uses a 5 V internal supply architecture, with a documented operating range of 4.75 V to 5.25 V. Its nonvolatile FastFLASH configuration technology retains the programmed logic after power is removed, avoiding repeated configuration loading after every power cycle. The device also supports in-system testing, which helps production teams verify assembled boards and isolate board-level interconnect faults. Typical uses include industrial control and sequencing logic, legacy peripheral expansion, data acquisition interfaces, memory-control glue logic, and board-level test or debug infrastructure. The combination of 72 I/O and a 100-pin surface-mount package allows substantial signal connectivity without moving to a larger programmable-logic device. When designing around this device, retain the original XC9500 schematic, package, and timing constraints rather than treating newer CPLD families as direct replacements. Verify every supply rail, termination input, and pin assignment against DS065. Because the device is listed as obsolete, long-lived programs should evaluate an approved migration path before releasing new production quantities. This page organizes the obsolete-status notice, package details, programming characteristics, pin-compatible options, and practical replacement considerations. It also distinguishes same-footprint candidates from alternatives with different voltage architectures, helping engineers evaluate board reuse without overlooking configuration, timing, and lifecycle constraints.

Permintaan RFG Kontak
XC9572XL - 3.3V 72-Macrocell CPLD 5ns | Xilinx AMD
XC9572XL

XC9572XL - 3.3V 72-Macrocell CPLD 5ns | Xilinx AMD

The Xilinx (now AMD) XC9572XL is a 3.3V high-performance CPLD (Complex Programmable Logic Device) providing 1,600 usable gates, 72 macrocells, and a worst-case pin-to-pin propagation delay of 5 ns, housed in low-profile VQFP packages such as the 44-pin VQ44 and 64-pin VQ64. A CPLD is a type of programmable logic device that sits between simple PLDs and FPGAs in the programmable logic hierarchy. Unlike FPGAs, which use look-up tables and volatile configuration memory, CPLDs use macrocell-based sum-of-products architecture with nonvolatile program storage, delivering deterministic, pin-to-pin timing and instant-on operation at power-up. This makes CPLDs the workhorse choice for glue logic, bus interfacing, and power-sequencing control in embedded systems. The XC9572XL is comprised of four 54V18 Function Blocks, each containing 18 macrocells. Key features include 3.3V core operation targeted at high-performance, low-voltage applications in leading-edge communications and computing systems; industry-leading pin-locking capability through a switch matrix that routes flexibly; and multiple speed grades (-5, -7, -10) so designers can trade speed against cost. Individual output enables and slew-rate-limited outputs ease 3.3V bus interfacing. Architecturally, every macrocell is a registered or combinational function generator with product-term allocation, allowing dense state machines without wasting resources. Because configuration is stored in nonvolatile memory across the XC9500XL family, no external boot flash or configuration controller is required, simplifying BOM and board design compared with SRAM-based FPGAs. Typical applications include address decoding and glue logic in embedded processors, bus bridging and interfacing in communications equipment, power-up reset and sequencing control, industrial I/O expansion, and legacy system life-cycle extensions where deterministic timing matters. Design-wise, use the -5 speed grade only where the 5 ns timing is genuinely needed; the -10 grade offers the best value for most glue-logic tasks. Note that design entry requires the legacy Xilinx ISE toolchain, which no longer runs natively on modern Windows. This page synthesizes distributor pricing, drop-in alternatives across speed grades and packages, and practical design notes not found in the manufacturer datasheet DS057.

Permintaan RFG Kontak
XC9572XL-10VQG64C - 72-Macrocell 10ns CPLD | AMD/Xilinx
XC9572XL-10VQG64C

XC9572XL-10VQG64C - 72-Macrocell 10ns CPLD | AMD/Xilinx

The AMD/Xilinx XC9572XL-10VQG64C is a 3.3V, 10ns pin-to-pin delay, 72-macrocell high-performance CPLD housed in a 64-pin VQFP (VQG64) package. It is built on the 2.5V XC9500XL family architecture, providing four 54V18 Function Blocks (FBs) that deliver 1,600 usable gates with predictable, JTAG-programmable logic and 100,000 program/erase cycles endurance. The device targets glue-logic and bus-interface functions where deterministic timing and instant-on (in-system programmable via IEEE 1149.1 JTAG) replace discrete 74-series logic. A CPLD (Complex Programmable Logic Device) is a non-volatile, instant-on programmable logic device whose architecture is a sea of macrocells backed by a programmable interconnect matrix. In the system hierarchy, a CPLD sits below an FPGA (typically lower density but lower power and no configuration time) and above discrete SSI/MSI gates. CPLDs are routinely used as interface bridges, address decoders, state machines, and power-up sequencers in designs that need predictable timing in a single device. Key features of the XC9572XL-10VQG64C include 72 macrocells, 1,600 usable gates, 4 ns internal timing with 10 ns pin-to-pin (tPD) at 3.3V, 34 user I/O pins (64-pin VQFP), 5V-tolerant I/O with 3.3V core, and In-System Programmable (ISP) via JTAG. The XC9500XL family uses 5V tolerant I/O on a 3.3V core for mixed-voltage board designs. The device is specified over the commercial 0C to +70C ambient range (C suffix), with an industrial -40C to +85C option available as XC9572XL-10VQG64I. Architecturally, each Function Block contains 18 macrocells, 54 product terms, and a sum term allocated from a global pool, with the IEEE 1149.1 boundary-scan chain extending across all I/O pins. Per datasheet DS057, the Fast CONNECT switch matrix provides 100% connectivity to every FB output, enabling deterministic place-and-route timing. The I/O blocks support 5V tolerant inputs, 24 mA drive, slew-rate control, and per-pin user I/O standards. Typical applications include bus-interface bridging, address decoding, power-up logic sequencing, and I/O expansion in telecom line cards, industrial controllers, and embedded computing platforms. Because of its 5V tolerant I/O on a 3.3V core, the XC9572XL-10VQG64C is well suited to legacy systems that mix 5V peripherals with 3.3V ASICs. Designers also use it as an FPGA configuration PROM companion or as a power-sequencer for multi-rail designs. When designing with this part, ensure the JTAG TMS, TCK, TDI, and TDO pins are reserved and pulled appropriately, and provide a clean VCCAUX 3.3V rail because all outputs are powered from VCCIO while the core runs from VCCINT. Verify pin-compatibility across the family when migrating density, since the XC9536XL, XC9572XL, and XC95144XL share a footprint family plan across the 44-, 64-, and 100-pin VQFP/TQFP packages. This page synthesizes distributor stock and lead-time data, pin-compatible XC9500XL alternatives, and practical glue-logic design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
XC9572XL-5CS48C - 72-Macrocell CPLD 5ns 3.3V | AMD/Xilinx
XC9572XL-5CS48C

XC9572XL-5CS48C - 72-Macrocell CPLD 5ns 3.3V | AMD/Xilinx

The AMD (Xilinx) XC9572XL-5CS48C is a 3.3V in-system-programmable CPLD with 72 macrocells, 1600 usable gates, and 38 user I/O pins, delivering a fast 5 ns pin-to-pin propagation delay (tPD) in a 48-ball CSBGA (7x7 mm) package. A Complex Programmable Logic Device (CPLD) is a class of programmable logic that sits between simple PAL/GAL devices and large FPGAs in the digital-logic hierarchy. CPLDs implement sum-of-products logic arrays with deterministic, pin-to-pin timing, making them ideal for glue logic, address decoding, bus interfacing, and power-on state machine control where predictable delays matter more than logic density. Key features of the XC9572XL-5CS48C include 5 ns worst-case propagation delay, system frequencies up to 178.6 MHz, and the industry-standard XC9500XL architecture built on a 0.35 micron CMOS Flash process. Every macrocell is fully configurable, and the device supports in-system programming (ISP) with a minimum of 10,000 program/erase cycles per AMD product documentation. Flash retention is specified for 20 years, and individual macrocells provide product-term allocation, local feedback, and set/reset controls. The FastFLASH technology combines a flash memory cell with the proven XC9500 switch matrix, giving designers low standby power - important for battery-backed and always-on 3.3V systems - while eliminating configuration PROMs required by SRAM-based FPGAs. The 48-ball chip-scale BGA footprint minimizes board area while offering the power integrity and signal integrity advantages of distributed power and ground balls. Typical applications include address decoding and bus control in embedded processors, glue-logic consolidation replacing multiple 74-series devices, power-supply sequencing and reset management, industrial control I/O expansion, and communication-interface bridging. The commercial temperature rating (suffix C) suits office and laboratory environments. Designers should observe AMD power-management guidelines: the device supports a standby mode with greatly reduced ICC, and unused I/O should be terminated as recommended in the datasheet (DS057). Because the package is a BGA, rework requires a reflow station, so verify footprint land patterns per AMD package drawings. This page adds value beyond the datasheet by compiling drop-in same-family alternatives with speed-grade and temperature-suffix differences, distributor price evidence, practical design notes, and application guidance in one place.

Permintaan RFG Kontak
XC9572XL-5VQ44C - 72-Macrocell 3.3V CPLD TQFP-44 | AMD Xilinx
XC9572XL-5VQ44C

XC9572XL-5VQ44C - 72-Macrocell 3.3V CPLD TQFP-44 | AMD Xilinx

The AMD (Xilinx) XC9572XL-5VQ44C is a high-performance, low-voltage CPLD (Complex Programmable Logic Device) with 72 macrocells and 1600 usable gates, housed in a 44-pin VQFP (TQFP-44) package and rated for commercial temperature operation as indicated by the C suffix. A CPLD is a type of programmable logic device that sits between simple programmable logic devices (SPLDs such as GAL and PAL) and large FPGAs in the programmable-logic hierarchy. It consists of multiple function blocks with macrocells interconnected through a programmable switch matrix, delivering deterministic pin-to-pin timing that FPGAs cannot guarantee. This makes CPLDs ideal for glue logic, state machines, address decoding, and power-up configuration control in embedded systems. The XC9572XL family belongs to the low-voltage branch of the classic XC9500 CPLD family, operating from a 3.3V supply, which reduces power consumption and simplifies integration with modern low-voltage logic. Key features include in-system programmability (ISP), 10,000 program/erase cycles of Flash endurance, and the FastFlash zero-power technology that combines very low standby current with high speed. The -5 speed grade denotes the fastest commercial timing grade in the family. Architecturally, each macrocell is a fully flexible, registered function unit that can implement combinational or sequential logic, with product-term steering providing high DFT (design-for-test) flexibility. The switch matrix routes signals between function blocks and I/O pins with predictable, uniform delays, which is why the family is prized for timing-critical control logic and bus interfaces. Typical applications include bus-interface bridging, address decoding in microprocessor systems, power-sequencing and reset control, legacy logic consolidation, and as a configuration controller companion for larger FPGAs. Retro-computing and industrial-control designs frequently adopt this part for its deterministic timing and reprogrammability. When designing with this device, program it using the AMD/Xilinx ISE toolchain, which remains the supported software for the XC9500XL family; verify the JEDEC programming file targets the exact speed grade and package suffix. Note that ISE no longer installs natively on Windows 10, so plan a compatible tool environment early in the project. This page adds engineering value beyond the manufacturer datasheet (DS057) by compiling drop-in same-family alternatives, a parametric comparison table, practical design notes, and sourcing guidance in one place.

Permintaan RFG Kontak
XC9572XL-5VQ64C - 72-Macrocell 3.3V CPLD 5ns | AMD Xilinx
XC9572XL-5VQ64C

XC9572XL-5VQ64C - 72-Macrocell 3.3V CPLD 5ns | AMD Xilinx

The AMD (Xilinx) XC9572XL-5VQ64C is a high-performance 3.3V CPLD with 72 macrocells, 1600 usable gates, 52 user I/O pins, and a maximum propagation delay of 5 ns, housed in a 64-pin TQFP (VQ64) package for commercial temperature ranges. A CPLD (Complex Programmable Logic Device) is a class of programmable logic that sits between simple PAL/GAL devices and large FPGAs in the programmable logic hierarchy. CPLDs use macrocell-based architecture with wide, fast AND/OR arrays that deliver deterministic, pin-to-pin timing, making them ideal for glue logic, state machines, bus interfacing, and power-up management tasks that require guaranteed timing and instant-on behavior. Key features of the XC9572XL family include in-system programmability (ISP) with a minimum of 10,000 program/erase cycles, 3.3V internal supply operation from 3V to 3.6V, and a maximum clock frequency of 178.6 MHz. The device provides 36 inputs and 36 outputs with 52 I/O lines available to the user, organized into four dedicated logic array blocks (function blocks). Architecturally, the XC9572XL consists of function blocks connected by a FastCONNECT switch matrix. Each macrocell includes a registers/flip-flop that can be configured as D, T, or JK type, with individual product-term control of clock, set, and reset. The 5 ns tpd version (-5 speed grade) is the fastest in the XC9572XL lineup, and the low-voltage process reduces power consumption compared to the earlier 5V XC9500 family. Typical applications include telecom and networking line-card glue logic, industrial automation control interfaces, 5G infrastructure board management, medical instrumentation, and legacy FPGA/CPU bus-bridging designs. The instant-on, non-volatile configuration eliminates the external configuration flash required by SRAM FPGAs, simplifying power sequencing. Design consideration: verify both a 3.3V tolerant I/O budget and the 10,000-cycle program/erase endurance limit; frequent field reprogramming beyond the endurance rating can degrade flash cells. Use the AMD iMPACT tool with the standard JTAG chain for in-system programming. This page adds value beyond the manufacturer datasheet by consolidating drop-in alternatives, application guidance, procurement channels, and practical design notes for the XC9572XL-5VQ64C in one place.

Permintaan RFG Kontak
XC9572XL-5VQG64C - 72-Macrocell 5 ns CPLD | AMD | VQFP-64
XC9572XL-5VQG64C

XC9572XL-5VQG64C - 72-Macrocell 5 ns CPLD | AMD | VQFP-64

AMD XC9572XL-5VQG64C is a 72-macrocell complex programmable logic device providing 1,600 usable gates, 52 user I/O pins, and a 5 ns propagation-delay option in a 64-pin VQFP package. It operates from a 3.3 V supply and uses four dedicated logic array blocks to implement general-purpose combinational and sequential logic. A CPLD is a programmable logic device positioned between simple PAL/GAL logic and larger FPGAs. Its macrocells combine programmable AND/OR logic with registered outputs, allowing compact implementations of control logic, interface translation, decoding, counters, and state machines. The XC9572XL belongs to the Xilinx XC9500XL family and is targeted at low-voltage communications and computing systems requiring deterministic logic implementation without a large FPGA configuration memory or complex routing fabric. The device contains 72 macrocells, 1,600 usable gates, and 52 user I/O pins. Its 5 ns speed designation identifies the device as the fastest specified grade in the target family. The 3.3 V operating supply and low-voltage architecture suit modern control and interface systems, while in-system programming permits configuration without removing the device from its assembled circuit. The programming interface can support repeated field updates when the system provides the required control logic and power management. Functionally, the four logic array blocks connect to peripheral input and output blocks through the internal interconnect. Each macrocell can implement combinational equations, registered functions, and product-term feedback according to the device architecture described in AMD datasheet DS057. This structure provides more predictable timing for fixed logic than a general-purpose FPGA and remains useful for legacy equipment, industrial controllers, communication interfaces, and compact glue-logic designs that must reproduce an established CPLD design. Typical applications include protocol-interface logic, data-format conversion, bus arbitration, peripheral control, address decoding, industrial automation, and embedded system sequencing. The 52 user I/O pins are particularly useful when a design needs numerous moderate-speed digital connections without moving to a larger programmable-logic device. Legacy replacement projects can also benefit from the device's combination of 72 macrocells, 1,600 usable gates, and in-system programmability. Design work should begin by confirming that the existing schematic, PCB footprint, pin assignments, and programming algorithm match the 64-pin VQFP device. Stable power sequencing, input conditioning, output loading, and programming-signal integrity are essential because CPLD behavior depends on correct configuration and power delivery. The exact pin names, programming algorithm, and electrical limits should be taken directly from the AMD datasheet and device documentation before layout release. This product page combines the XC9572XL device characteristics with same-family replacement options, package-aware comparisons, application guidance, and practical design checks. It helps engineers identify the correct speed grade, assess migration options, and plan PCB or firmware work without overlooking configuration, supply, and timing constraints.

Permintaan RFG Kontak
XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx
XC9572XL-7PC44I

XC9572XL-7PC44I - 72-Macro-Cell 3.3V CPLD | AMD Xilinx

AMD Xilinx XC9572XL-7PC44I is a 3.3 V, 72-macro-cell complex programmable logic device with a 7.5 ns performance grade, supplied in a 44-terminal square PLCC package. It combines non-volatile configuration storage, in-system programmability, boundary-scan support, hot-plugging capability, and 3.3 V operation for compact control, glue-logic, and interface designs. The device is identified by the industrial temperature grade and the PC44 package designation. A complex programmable logic device, or CPLD, is a programmable semiconductor positioned between simple fixed-function logic and FPGA resources. Its macrocell architecture provides product-term Boolean logic, registers, and programmable interconnect for implementing control logic, state machines, bus arbitration, protocol conversion, and peripheral interfaces. The XC9572XL belongs to the broader hierarchy of programmable logic devices, which includes simple PLDs, CPLDs, and FPGAs. Key characteristics include 72 macro cells, 44 package terminals, a 3.3 V supply, and a 7.5 ns speed grade. Individual output-enable control, local output inversion, input hysteresis, bus-hold capability, and per-pin input features improve implementation flexibility. Flash-based configuration preserves the implemented logic when power is removed, avoiding separate programming after every power cycle. The device supports a mixture of combinational and registered logic in one package, making it useful for designs that need more deterministic control than a basic PAL or GAL while avoiding the resource scale and complexity of larger FPGAs. Its PLCC package provides 44 physical terminals for board-level assembly, and the family documentation describes in-system programming and boundary-scan-compatible operation. Typical uses include industrial controller logic, data-acquisition interfaces, legacy peripheral emulation, automated-test equipment, sensor conditioning, motor-control sequencing, and communication bridge logic. The 72-macro-cell capacity is particularly appropriate for multiple state machines, bus controls, and protocol interfaces that must retain their configuration during power interruptions. Designers should preserve the device's required power, programming, and configuration behavior exactly as described in the manufacturer data sheet. PCB allocation must follow the 44-terminal PLCC footprint and its pin designations, while software, design-entry, programming-cable, and in-system-programming choices must be checked against the legacy XC9500XL tool flow before schematic capture begins. This product page consolidates the verified manufacturer specifications, package details, programming references, lifecycle position, and available drop-in family alternatives. It also provides practical selection and replacement guidance that helps engineers distinguish speed-grade, temperature-grade, and package differences before approving a substitution.

Permintaan RFG Kontak