Produk (44.000+)

Z86C9320PSC - 8-Bit 20MHz ROMless MCU | Zilog | DIP-40
Z86C9320PSC

Z86C9320PSC - 8-Bit 20MHz ROMless MCU | Zilog | DIP-40

The Zilog, Inc. Z86C9320PSC is an 8-bit, 20MHz ROMless Z8 C93-series microcontroller in a 40-pin through-hole DIP package. It is designed for embedded control applications that require multiply/divide arithmetic, programmable I/O, timers, and a compact external-memory architecture. Because the device is ROMless, application firmware must be stored in an external program-memory device and loaded through the MCU’s external bus interface. The Z86C9320PSC is identified as commercial-grade and belongs to the Zilog Z8 family of CMOS microcontrollers. An 8-bit ROMless microcontroller is a programmable embedded controller whose architecture, registers, timers, ports, and arithmetic peripherals are optimized for compact control systems. Within the product hierarchy, the Z86C9320PSC is a microprocessor IC and an embedded microcontroller. Unlike a device containing fixed program memory, its ROMless architecture separates the control core from application code, allowing the same controller family to address different firmware sizes and peripheral combinations. The Z86C9320PSC operates at up to 20MHz and provides a 16-bit-by-16-bit multiplier and a 32-bit-by-16-bit divider. These dedicated arithmetic functions reduce the execution burden of multiply and divide operations in motor-control, measurement, timing, and industrial automation logic. The C93 series also includes three 16-bit counter timers, a capture register, and a fast decrement mode, providing useful building blocks for event counting, frequency measurement, periodic timing, and pulse-width-related applications. The ROMless Z8 architecture allows the MCU to operate with external program memory while its internal peripherals handle real-time control tasks. Its 8-bit data path is appropriate for compact products where the computational load is dominated by control, sequencing, and arithmetic rather than high-bandwidth data processing. The 40-pin DIP format also supports straightforward prototyping, socket-based assembly, and systems that favor a through-hole mechanical interface over a fine-pitch surface-mount package. Typical uses for this controller include industrial sequence controllers, motor and stepper-control logic, instrumentation, measurement systems, timer subsystems, and embedded products that need dedicated multiplication or division. A ROMless implementation is particularly useful when the final firmware size is uncertain, multiple firmware variants share a common controller platform, or product revisions require code changes without changing the MCU. The main design consideration is that the external program-memory interface and associated bus layout require careful planning on the PCB. Decoupling, clock stability, address decoding, and signal routing around the 40-pin DIP should follow the manufacturer’s recommended application circuit. Because the part is a legacy through-hole controller, availability, lifecycle status, and firmware-tool support should be confirmed before committing to a new production design. This page consolidates the Z86C9320PSC device identity, package information, lifecycle indication, arithmetic capabilities, and carefully qualified replacement information. It also distinguishes true same-footprint drop-in choices from related MCU options, helping engineers assess controller continuity without confusing functional similarity with PCB-level compatibility.

Permintaan RFG Kontak
Z86C9320PSG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320PSG

Z86C9320PSG - 8-Bit 20MHz ROMless MCU | Zilog

Zilog Z86C9320PSG is an 8-bit Z8 ROMless microcontroller operating at up to 20 MHz, with a 4.5 V to 5.5 V supply range, 24 I/O ports, an 8-bit data bus, and a 40-pin PDIP package. It belongs to the Zilog Z8 family of CISC-based embedded microcontrollers and is intended for applications requiring external program memory and a broad mix of digital I/O. A ROMless microcontroller is a semiconductor that contains a processor core and peripherals but requires an external memory device for program storage. The Z86C9320PSG therefore supports designs in which firmware size, memory organization, or update strategy is better handled by external ROM. Within the product hierarchy, it is an 8-bit microcontroller, an embedded controller, an integrated circuit, and a programmable semiconductor. The Z86C9320PSG combines a maximum clock frequency of 20 MHz with 24 I/O ports and an 8-bit data bus. Its 4.5 V to 5.5 V operating supply supports conventional 5 V embedded systems. The through-hole 40-pin PDIP package also facilitates prototyping, inspection, and replacement in control boards where through-hole assembly is preferable to a fine-pitch surface-mount footprint. The Z8 architecture uses a CISC instruction set optimized for compact embedded control. Because the device is ROMless, the external program-memory interface is central to the system design rather than an optional feature. Engineers should account for address decoding and signal timing when connecting memory, while ensuring that the selected memory device and board-level bus meet the controller's electrical requirements. Typical applications include industrial control panels, appliance controllers, keypad interfaces, digital sequencers, motor-control logic, and other embedded systems combining external program storage with multiple digital inputs and outputs. Its 24 I/O ports can distribute sensing and actuation functions across a board while leaving a modest number of pins for address, data, control, and power functions. The primary design consideration is package and memory planning. Confirm the complete pin assignment and external-memory interface in the manufacturer datasheet before assigning board functions, and route critical bus signals away from noisy switching stages. The 40-pin PDIP footprint is mechanically straightforward, but pin availability for a particular application still depends on the external memory architecture and required bus control signals. This page combines core device characteristics, replacement guidance, package considerations, and practical selection criteria. It is intended to help engineers determine whether the Z86C9320PSG fits an existing 40-pin control-board design and what must be checked before committing to a replacement or redesign.

Permintaan RFG Kontak
Z86C9320VSC - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320VSC

Z86C9320VSC - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320VSC is an 8-bit Z8 ROMless microcontroller operating at 20 MHz and packaged in a 44-pin PLCC. Its ROMless architecture requires an external program-memory source, making it suitable for systems that need flexible firmware storage, field programming, or program separation from the controller. The device belongs to the Z86C93 microcontroller family and targets embedded control, communications, and industrial applications requiring deterministic 8-bit processing. A microcontroller is a complete embedded-control component that integrates a processor core, memory interfaces, timers, serial peripherals, and I/O resources onto one semiconductor device. The Z86C9320VSC sits in the hierarchy of embedded controller, microcontroller, 8-bit MCU, and Z8 ROMless controller. Unlike a ROM-based MCU with fixed internal program memory, this architecture delegates program storage to external memory, allowing the same controller family to serve products with different firmware and memory-capacity requirements. The principal documented characteristics include an 8-bit CPU, a 20 MHz operating frequency, ROMless configuration, and a 44-pin PLCC package. Its 20 MHz clock capability provides substantially more instruction throughput than lower-speed 8-bit controllers, making it useful for interrupt-driven control, serial protocols, keypad or display interfaces, and communication front ends. The external-memory architecture is especially valuable when firmware size, updateability, or protection requirements exceed practical internal-ROM limits. The Z86C9320VSC belongs to Zilog's Z86C93 family and is identified in the product listings as the C93 device. Its architecture supports the role of a dedicated embedded controller rather than a general-purpose host processor. Board-level implementation therefore requires careful routing of the external memory interface and correct decoupling of the supply rails. Firmware development also depends on a toolchain and programmer compatible with the Z8 family, so software-tool availability should be confirmed before committing to a new design. Typical uses include industrial control panels, data-acquisition modules, serial protocol bridges, programmable logic controllers, and embedded communications equipment. The device is particularly appropriate where an 8-bit architecture simplifies code and peripheral handling while external program memory permits application-specific code storage. It can also be used in legacy Z8 control systems where retaining the established 44-pin PLCC footprint simplifies maintenance and board reuse. For new layouts, place the controller and supporting external-memory devices according to the manufacturer's pin and layout guidance, and keep high-current and switching circuitry away from sensitive signal paths. Confirm the exact programming algorithm, clock configuration, reset requirements, and external-memory interface in the manufacturer datasheet before schematic release. Production designs should also verify temperature grade, package marking, sourcing status, and programming-tool support with the manufacturer. This page consolidates the core Z86C9320VSC identity, package and frequency details, replacement considerations, and practical design guidance. It also distinguishes confirmed device attributes from electrical details that require direct review of the manufacturer datasheet, helping engineers make a technically sound sourcing and design decision.

Permintaan RFG Kontak
Z86C9320VSG - 8-Bit 20MHz ROMless MCU | Zilog
Z86C9320VSG

Z86C9320VSG - 8-Bit 20MHz ROMless MCU | Zilog

The Zilog Z86C9320VSG is an 8-bit Z8 Z8 C93-series ROMless microcontroller operating at up to 20 MHz, with 236 bytes of RAM and multiply/divide capability in a 44-pin PLCC package. It is designed for embedded control systems requiring a compact processor, parallel and serial control peripherals, and externally supplied program memory. A ROMless microcontroller is a semiconductor that contains a processor core and peripheral hardware but omits embedded program memory. Zilog's Z8 family sits within the broader 8-bit microcontroller hierarchy, where the CPU core, timers, serial interfaces, interrupt controller, and external memory interface provide a compact alternative to a general-purpose processor. Z86C9320VSG is identified as a C93-series device, making it appropriate for legacy Z8 control architectures and designs requiring external program-memory organization. The headline characteristics are an 8-bit CPU, a 20 MHz maximum clock, 236 bytes of RAM, ROMless operation, multiply/divide arithmetic, and a 44-pin PLCC package. Its external-memory architecture allows the final firmware capacity to be established with suitable memory devices rather than a fixed internal ROM. The 44-pin PLCC also provides a substantial pin count for interfacing external program memory and the peripheral signals needed by embedded industrial equipment. Z86C9320VSG belongs to the Zilog Z86C93 device family. The ROMless configuration is useful when application firmware must remain in external nonvolatile memory, when production code revisions need a flexible memory strategy, or when a board family must share one processor and support several memory sizes. The processor's 20 MHz operating rate supports deterministic control logic, while the multiply/divide function is useful for scaling, compensation, and basic arithmetic tasks that would otherwise require software routines. Typical applications include industrial controllers, legacy peripheral-control boards, motor and mechanism controllers, instrumentation interfaces, and embedded systems that already use the Z8 C93 architecture. In these systems, external program memory can hold firmware while the microcontroller manages timing, communications, and I/O. The PLCC package is also appropriate for leaded, socket-compatible industrial hardware and prototypes where field replacement or component-level servicing may be important. Designers should verify the external memory interface, interrupt requirements, peripheral assignments, and pin multiplexing in the Zilog device documentation before layout release. Because the MCU is ROMless, the complete system must include suitable external program memory and the associated address, data, and control routing. A practical advantage is the flexible firmware-memory sizing, while the main trade-off is the additional board area and component count compared with a ROM-based microcontroller. This page consolidates the verified Z86C9320VSG device identity, package information, sourcing context, replacement analysis, and engineering guidance into a design-oriented reference. It also distinguishes verified drop-in interchangeability from unreferenced similarity so engineers can assess PCB reuse and migration risk with greater clarity.

Permintaan RFG Kontak
Z86C9325ASC - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325ASC

Z86C9325ASC - 25MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9325ASC is a 25 MHz, 8-bit, ROMless Z8 microcontroller supplied in a 48-pin LQFP package measuring 7 mm by 7 mm. It operates from a 3 V to 5.5 V supply and provides the classic Z86C93 function set as a compact embedded controller for cost-sensitive, low-power systems. A ROMless 8-bit microcontroller is an embedded processing IC designed around an 8-bit CPU architecture and external program memory. Unlike a ROM-equipped variant, it allows firmware to remain in external nonvolatile memory, giving designers flexibility to update application code, share memory across products, or support multiple firmware configurations without changing the controller. The Z86C9325ASC operates at 25 MHz, enabling the processor to execute control loops, scan input devices, update displays, and manage communication peripherals efficiently. Its 3 V to 5.5 V operating range supports both 3.3 V and 5 V system architectures. Listings identify the device as ROMless and associate the Z8 family with multiply and divide capabilities, making it suitable for motor, display, appliance, and industrial-control functions that require more arithmetic performance than a basic 8-bit controller. The 48-pin LQFP-48 (7x7 mm) package provides the external interface required for a ROMless design. Because program storage is external, the complete PCB design must account for the associated address, data, and control paths. Component density is higher than that of smaller 8-bit packages, but the 7 mm by 7 mm footprint remains practical for industrial controllers, instrument panels, embedded control modules, and compact automation equipment. Typical uses include keypad-driven control panels, stepper-motor indexers, timer and counter modules, sensor acquisition controllers, and communication front ends. At 25 MHz, the device can service time-sensitive input/output tasks while leaving computational headroom for protocol handling and application logic. External memory access timing and bus loading should be evaluated against the required clock and program size. PCB planning should preserve the LQFP-48 footprint, provide a stable 3 V to 5.5 V supply, decouple the power rails close to the device, and route external-memory signals according to the manufacturer pin description. Because this ROMless configuration depends on external program memory, budget its cost, interface complexity, and update requirements together with the MCU. This product page combines the Z86C9325ASC package and operating specifications with sourcing guidance, family alternatives, comparison parameters, and practical design considerations. It provides engineering context beyond a basic distributor listing while keeping every unconfirmed electrical or pin-level value clearly identified for datasheet review.

Permintaan RFG Kontak
Z86C9325ASG - 8-Bit 25 MHz ROMless MCU | Zilog
Z86C9325ASG

Z86C9325ASG - 8-Bit 25 MHz ROMless MCU | Zilog

Zilog Z86C9325ASG is an 8-bit CMOS ROMless Z8 microcontroller operating at 25 MHz, supplied in a 48-pin LQFP package measuring 7 x 7 mm. It operates from a 3 V to 5.5 V supply and is designed for embedded control systems that require deterministic timer, arithmetic, and input/output performance in a compact surface-mount package. A microcontroller is a programmable system-on-chip that integrates a processor core, memory interface, timers, serial interfaces, and digital I/O into one device. The Z8 family belongs to the broader embedded-controller hierarchy: ROMless microcontrollers are programmed externally, allowing the same silicon to be used with different program memories or configurations. This makes them useful when a product requires field customization, external nonvolatile program storage, or a memory arrangement not addressed by the MCU's own program memory. The Z86C93 family includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. A capture register and fast decrement mode improve measurement and event-handling flexibility. These arithmetic and timing resources are valuable for motor control, industrial counting, signal timing, and compact embedded controllers that must perform calculations without relying on a more complex processor architecture. The 25 MHz operating rate provides more execution headroom than slower members of the Z86C93 family while retaining an 8-bit instruction-oriented architecture. Program storage is external because the device is ROMless, so designers must select the appropriate memory interface, programmer, and code-development workflow. Firmware determines the final peripheral configuration and application behavior, meaning successful implementation depends on matching the external program-memory device and bus timing to the controller requirements. Typical applications include industrial timers, counter modules, keypad and display controllers, appliance controls, small motor-control boards, and embedded OEM products requiring compact 8-bit control. The 48-pin LQFP package exposes more I/O than smaller packages and supports prototype and production assembly using standard surface-mount processes. It is particularly appropriate where three timers and dedicated arithmetic hardware simplify control tasks that would otherwise require additional discrete logic. For layout and firmware work, begin with the manufacturer pin-description table and the Z86C93 hardware design guidance. Confirm external program-memory addressing, oscillator connections, reset behavior, and the functions assigned to every I/O pin before routing the board. Pay particular attention to trace length, grounding, and decoupling around high-frequency clock and program-bus signals because those routes determine whether the intended 25 MHz operation is reliable in the final assembly. This product overview combines the verified Z86C93 device characteristics with practical guidance on package use, firmware resources, and board integration. It also identifies the limits of direct substitution: an equivalent-looking 8-bit microcontroller is not a true drop-in replacement unless its package pins, electrical ratings, timer resources, instruction behavior, and external memory interface are all confirmed compatible.

Permintaan RFG Kontak
Z86C9325FSC - 25MHz ROMless 8-Bit MCU | Zilog | 44-QFP
Z86C9325FSC

Z86C9325FSC - 25MHz ROMless 8-Bit MCU | Zilog | 44-QFP

Zilog Z86C9325FSC is an 8-bit CMOS ROMless Z8 microcontroller operating at 25 MHz and supplied in a 44-pin QFP package. The device is based on the Z86C93 controller family and includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. Its maximum supply voltage is listed as 5.00 V, while the commercial temperature grade and gull-wing surface-mount construction suit established embedded control applications. A ROMless microcontroller is an 8-bit embedded processor whose program storage is external rather than embedded in the device. The Z86C9325FSC therefore functions as a complete controller core, using external memory for firmware and data. Within the embedded-device hierarchy, it belongs to the microprocessor and microcontroller class, combines an 8-bit CPU with dedicated arithmetic and timing peripherals, and supports designs requiring deterministic control without a large embedded ROM. External program and data memory also make this architecture useful where firmware updates or field-reprogrammable logic are needed. The principal feature set includes the 25 MHz maximum clock, ROMless operation, the hardware multiplier, the divider, three 16-bit timer/counter channels, a capture register, and fast decrement mode. Additional interface signals identified for the Z86C9325 family include SCLK, IACK, SYNC, and WAIT. These characteristics make the part suitable for industrial controllers, motor-control systems, instrumentation, communications equipment, and legacy Z8-based embedded products where a compact 8-bit control engine is preferred. The Z86C93 architecture separates general control from frequently used arithmetic operations. A hardwired 16-bit by 16-bit multiplier accelerates multiplication without a software loop, while the 32-bit by 16-bit divider supports higher-width division tasks. The three 16-bit counters provide timing resources for periodic generation, event counting, pulse measurement, and motor or actuator sequencing. The capture register and fast decrement function improve handling of external timing events and countdown-style control sequences. The 44-QFP package provides 44 external connections in a square surface-mount form factor. Because this is a ROMless design, the board must provide suitable external program and data memory, address and data buses, and the required control signals. Decoupling and signal-integrity practices become particularly important because processor activity can produce fast bus transitions. The 5.00 V maximum supply rating should be treated as the principal electrical boundary during schematic design and component selection. Typical implementation involves placing the controller beside external memory and interface circuitry, then using its counters and arithmetic accelerators for control-loop or communication tasks. Firmware timing must allow for memory access and peripheral synchronization. The 25 MHz clock rate provides more computation than typical low-end 8-bit controllers, while the multiplier and divider can reduce instruction overhead in control algorithms. Firmware and memory timing should nevertheless be verified together because external memory access can affect real-time behavior. This page consolidates the device identity, package information, family-level arithmetic capabilities, sourcing guidance, and engineering trade-offs around the Z86C9325FSC. It also distinguishes a confirmed same-package replacement from functional alternatives that would require a board redesign, helping engineers identify a valid hardware substitution without confusing general MCU similarity with true pin-to-pin compatibility.

Permintaan RFG Kontak
Z86C9325PSC - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325PSC

Z86C9325PSC - 25MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9325PSC is an 8-bit Z8 ROMless microcontroller operating at up to 25 MHz, with a 2.97 V to 5.5 V supply range in a 40-pin plastic DIP package. It is designed for embedded control systems that require external program memory and a compact 8-bit processing core. The through-hole package supports both prototype assembly and conventional through-hole PCB layouts. Its 40-pin PDIP form factor provides ample I/O access for sensors, switches, displays, actuators, and industrial control peripherals. An 8-bit microcontroller is a microprocessor and embedded-control IC designed around a central processing unit, memory interfaces, timers, interrupt logic, and digital I/O. The Z8 family belongs to the broader semiconductor hierarchy of embedded processors, microcontrollers, and programmable control devices. Because Z86C9325PSC is ROMless, firmware must be stored in external memory and loaded or accessed by the processor during operation. This architecture provides more flexibility than mask-programmed or one-time-programmable variants when code revisions and field updates are important. The principal device characteristics include a maximum clock frequency of 25 MHz, 8-bit processing, ROMless operation, and a 2.97 V to 5.5 V operating supply range. The Z86C9325PSC also provides the Z8 C93 controller feature set, including capture-register and fast-decrement capabilities described for this device family. Its 40-pin package exposes more signal paths than small 8-pin or 20-pin controllers, making it suitable for systems that need several inputs and outputs without adding a separate peripheral controller. The DIP package measures 0.620 inch, or 15.75 mm, across the pin row width according to the listed product information. It is a through-hole package rather than a surface-mount component, which simplifies breadboard and prototype construction but occupies more PCB area than a leadless or fine-pitch package. Because the processor has no internal program ROM, the board design must include a suitable external program-memory device and a defined memory interface. Designers should consult the pin-description and electrical tables in the manufacturer datasheet before assigning signals or laying out the external memory bus. Typical applications include industrial keypad and menu controllers, motor and stepper-control systems, instrumentation front panels, printer and scanner controllers, and general embedded automation equipment. The 25 MHz operating rate supports time-sensitive control tasks, while the broad I/O count can reduce the need for external interface expanders. Because the MCU is ROMless, it is particularly appropriate for products whose firmware must change during development or may require field revisions through an external programming arrangement. When creating a PCB, reserve a 40-pin DIP footprint, preserve the required external-memory connections, and route the clock and reset circuitry according to the manufacturer’s recommended schematic. A ROMless controller also requires attention to boot and memory-access timing. Because no public pin-description table is included in the available product records, use the manufacturer datasheet’s pin table to confirm signal names, supply pins, ground pins, and programming interface assignments before fabrication. This product page consolidates the exact device identity, supply range, package information, programming considerations, and verified same-family alternatives with practical selection guidance. It also distinguishes genuine drop-in options from differently packaged Z86C9325 variants, helping engineers assess PCB reuse, firmware constraints, external-memory requirements, and sourcing availability before committing to a design.

Permintaan RFG Kontak
Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog
Z86C9325PSG

Z86C9325PSG - 25MHz ROMless 8-Bit MCU | Zilog

Zilog, Inc. Z86C9325PSG is a ROMless 8-bit Z8 microcontroller with a 25 MHz core clock, 236 x 8 bytes of RAM, 24 general-purpose I/O pins, and a 40-pin DIP package. Its operating-voltage range is 3 V to 5.5 V, and its integrated interfaces include EBI/EMI and UART/USART connectivity. The device is designed for embedded control systems that require external program memory and flexible peripheral expansion. A ROMless microcontroller is an embedded controller whose application program is stored in external memory rather than internal mask-programmable ROM. This architecture belongs to the broader hierarchy of microcontroller, embedded processor, embedded controller, and semiconductor. It is useful when firmware revisions, external memory sizing, or shared program storage are important. Zilog's Z8 family combines an 8-bit CPU with integrated peripherals intended for control, communications, and mixed external-memory designs. Key features include a 25 MHz operating speed, 24 general-purpose I/O pins, 236 bytes of internal RAM, an internal oscillator, and serial and external-bus interfaces. The ROMless architecture allows the program-memory implementation to be selected separately from the microcontroller. Its 3 V to 5.5 V supply range supports both 3.3 V and conventional 5 V embedded systems, although designers must observe the operating limits associated with each clock and peripheral configuration. The Z86C9325PSG architecture is organized around an 8-bit Z8 core and an external program-memory interface. EBI/EMI provides access to external devices, while UART/USART supports serial communication with sensors, host computers, and other controllers. The 24 I/O pins allow a prototype to connect digital inputs, output devices, and address or data-bus signals. Exact pin directions, interrupt behavior, and memory-interface timing should be confirmed from the manufacturer datasheet before a PCB is released. Typical uses include industrial keypad controllers, appliance control modules, serial protocol bridges, programmable instrument interfaces, and embedded systems that benefit from externally updatable or shared program memory. Because the controller is ROMless, firmware can be stored in flash, SRAM, or another suitable external memory, allowing programmers to separate hardware configuration from application code. The principal design consideration is the external-memory interface. Board layout should minimize trace lengths between the Z86C9325PSG and external memory, provide a stable clock and supply network, and preserve signal-integrity margins on the external bus. Power-supply decoupling and input protection should be sized for the attached memory and peripheral loads rather than assuming that the microcontroller alone determines the demand. This product overview consolidates the verified core specifications, interface capabilities, package information, application guidance, and sourcing questions for engineers evaluating the Z86C9325PSG. It also distinguishes documented device facts from parameters that require confirmation in the manufacturer datasheet before layout or firmware deployment.

Permintaan RFG Kontak
Z86C9325VSC - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325VSC

Z86C9325VSC - 25MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9325VSC is an 8-bit ROMless Z8 microcontroller operating at up to 25 MHz with a 2.97 V to 5.5 V supply range. It provides 24 I/O ports, 236 bytes of data memory, and a 44-pin plastic leaded chip carrier package measuring 16.6 mm by 16.6 mm. The device is designed for embedded control systems that require an external program memory and a peripheral-rich 8-bit architecture. A ROMless microcontroller is an integrated circuit that executes application software from external memory rather than storing the program internally. In the product hierarchy, the Z86C9325VSC is an 8-bit microcontroller, a microcontroller, an embedded processor, and a semiconductor. Its Z8 core and external-memory interface allow designers to use larger program-memory devices than the MCU itself provides, while the 24 I/O ports support digital control, measurement, and communication interfaces. Principal electrical characteristics include a 25 MHz maximum clock frequency, an 8-bit data bus, 24 I/O ports, and operation from 2.97 V to 5.5 V. The component is identified as an active Zilog product. Its PLCC-44 package supports through-hole board assembly and offers enough pins for dedicated port signals and external bus connections. Because program storage is external, the complete system must include a suitable program-memory device and address, data, and control connections. The architecture is based on the Zilog Z8 family and is related to the Z86C91, while providing more capable mathematical processing. The family also includes a capture register and a fast decrement mode. These features make the controller relevant to industrial control logic, measurement equipment, motor-control peripherals, and legacy embedded platforms where an established 8-bit ecosystem and deterministic peripheral behavior are important. Typical applications include programmable logic controllers, instrumentation front ends, industrial sequencers, keypad-controlled equipment, and external-processor-memory control boards. A system designer should confirm the required bus timing, memory-device interface, pin multiplexing, and clock source before finalizing the schematic. The MCU's external program memory also affects boot time, firmware organization, and the total board-level component count. One key design consideration is that the ROMless architecture is not interchangeable with a device containing internal program memory without examining the external bus and firmware requirements. Use the manufacturer pin-description table and package drawing when assigning PCB tracks, and validate signal timing against the selected external memory. This page combines device specifications, sourcing guidance, replacement analysis, and practical design considerations for engineers evaluating the Z86C9325VSC.

Permintaan RFG Kontak
Z86C9325VSG - 25MHz 8-Bit ROMless MCU | Zilog
Z86C9325VSG

Z86C9325VSG - 25MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9325VSG is an 8-bit ROMless Z8-series microcontroller with a 25 MHz clock, 24 I/O ports, and a 2.97 V to 5.5 V operating supply range in a 44-pin PLCC package. It targets embedded control designs requiring an external program and data memory while retaining the Z8 peripheral architecture. A microcontroller is a programmable semiconductor that integrates a CPU core, memory interface, I/O ports, timers, and communication peripherals on one device. The Z86C9325VSG belongs to the Z8 family of 8-bit embedded controllers and is positioned as a general-purpose embedded-control component for industrial, consumer, and communications equipment. The controller combines a 25 MHz maximum clock with an 8-bit data bus and 24 I/O ports. Its 2.97 V to 5.5 V supply range supports both 3.3 V and 5 V system designs. The ROMless configuration permits firmware and data to be stored in external memory, providing greater design flexibility than a device with fixed internal program memory. The Z86C93 architecture includes a hardwired 16-bit by 16-bit multiplier, a 32-bit by 16-bit divider, and three 16-bit counter timers. A capture register and fast decrement mode support additional measurement and control functions. These resources can reduce external logic in motor, counter, signal-processing, and timing-oriented embedded systems. Typical uses include industrial controllers, appliance-control boards, communications equipment, keypad and panel interfaces, and compact embedded systems that need moderate processing speed with numerous I/O connections. External memory is required when program storage exceeds any external-memory configuration selected for the design, and the system must account for the controller’s external address and data interfaces. Layout planning should preserve access to all 44 PLCC terminals and route sensitive clock and reset signals away from noisy switching nodes. Power, decoupling, programming, and clock requirements should be implemented according to the Z86C93 manufacturer datasheet. Because this is a ROMless controller, firmware availability, boot behavior, and external-memory sizing determine whether it remains a practical upgrade option. This page combines the Z86C9325VSG specifications with package details, engineering applications, verified drop-in references, and practical selection guidance. It is designed to help engineers assess clock rate, voltage compatibility, external-memory requirements, pin count, and lifecycle status before committing a new PCB design.

Permintaan RFG Kontak
Z86C9333ASG - 33MHz 8-Bit ROMless MCU | Zilog
Z86C9333ASG

Z86C9333ASG - 33MHz 8-Bit ROMless MCU | Zilog

The Zilog Z86C9333ASG is an 8-bit ROMless Z8 microcontroller operating at 33 MHz, supplied in a 48-pin LQFP package measuring 7 x 7 mm. Its 4.5 V to 5.5 V operating-voltage range suits 5 V embedded control systems where an 8-bit processor must combine straightforward peripheral integration with deterministic control performance. The part is identified as part of the C93 microcontroller family. An 8-bit microcontroller is a compact embedded processor designed to execute control instructions from externally supplied program memory. The ROMless architecture places code in external memory rather than an internal masked-ROM array, allowing the same controller to be used with different program-storage arrangements. Within the product hierarchy, the Z86C9333ASG is an embedded microcontroller, an integrated circuit, and a semiconductor intended for industrial automation, instrumentation, and equipment-control applications. The principal operating specifications are a 33 MHz clock, an 8-bit CPU architecture, and a 4.5 V to 5.5 V supply range. The device also incorporates a multiplier and divider capability according to the product description. These functions make it useful in control systems that need arithmetic scaling, frequency generation, timing measurement, or peripheral clock division without relying on a higher-cost processor architecture. The Z86C9333ASG uses a 48-pin LQFP package, providing a comparatively high pin count for an 8-bit controller and supporting connection of multiple external interfaces and memory devices. Its 7 x 7 mm body keeps the component practical for compact industrial control boards. The package exposes the controller's external program-memory interface, general-purpose I/O, and other device functions through a surface-mount footprint requiring careful signal-integrity and layout planning. Typical uses include industrial controllers, data-acquisition equipment, programmable logic controllers, instrumentation, and embedded automation modules. A designer may select this device when the application fits an 8-bit control model but requires external program memory, moderate processing speed, and extensive I/O. It can also serve as a dedicated subsystem controller alongside another processor when peripheral management or timing functions dominate the design. PCB implementation should prioritize a short, continuous ground return beneath the device and careful routing of clock, reset, and external-memory signals. Decoupling capacitors should be placed directly beside the relevant supply pins, while external program-memory routing should minimize propagation delay between the controller and memory components. Before release, verify the exact pin assignments, electrical timing, and power requirements against the Zilog datasheet. This product page combines the Z86C9333ASG's confirmed operating characteristics, application guidance, sourcing information, and design considerations in a format that helps engineers evaluate the controller before beginning PCB layout or firmware development.

Permintaan RFG Kontak
Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog
Z86C9333FSC

Z86C9333FSC - 33MHz 8-Bit ROMless MCU | Zilog

Zilog Z86C9333FSC is a 33 MHz, 8-bit Z8 ROMless microcontroller with 236 x 8 bytes of RAM, 24 I/O lines, three 8-bit timers, UART/USART support, and EBI/EMI connectivity in a 44-pin LQFP package measuring 10 x 10 mm. Its 33 MHz operating speed provides higher throughput than conventional low-speed 8-bit controllers while retaining the simple Z8 architecture and external program-memory interface. An 8-bit microcontroller is a compact processor designed to execute embedded control logic from program memory and maintain operating state in RAM. The Z86C9333 belongs to the broader embedded-controller hierarchy: MCU -> microcontroller -> embedded processor -> semiconductor. A ROMless architecture means the device contains no internal program ROM, so firmware must be supplied through an external memory interface. This architecture is useful when programs, firmware revisions, or memory sizes must remain flexible. The verified feature set includes ROMless operation at 33 MHz, 236 bytes of RAM, 24 I/O lines, three 8-bit timers, UART communication, and EBI/EMI interfaces. The 44-LQFP surface-mount package exposes substantially more signal pins than small dual-inline packages, supporting parallel external memory and additional peripheral connectivity while remaining compatible with automated PCB assembly. The Z86C9333 architecture is intended for embedded control rather than high-compute workloads. Its external program-memory interface allows the stored firmware size to be established outside the MCU, while its three timers support periodic counting, timing, and event generation. UART/USART communication enables connection to host systems, sensors, or other controllers, and EBI/EMI provides an external bus-oriented path for additional devices. Typical applications include industrial keypad controllers, serial data concentrators, instrumentation interfaces, embedded control panels, and compact automation modules. In these systems, the 33 MHz speed can improve response to serial traffic and control tasks, while the 24 I/O lines reduce the need for separate I/O expanders. The ROMless configuration is particularly valuable when the same MCU platform must cover several firmware versions or board configurations. Designers must account for external program-memory timing, address decoding, bus contention, and required support components when using the ROMless configuration. PCB layout should minimize routing delay and preserve signal integrity on external bus and UART lines. Software must also provide the vector table and reset behavior expected by the external memory system. Because the verified data does not state supply voltage, timing margins, or detailed pin assignments, those values should be confirmed in the manufacturer documentation before schematic capture. This product page consolidates verified distributor specifications, same-package replacement information, application guidance, and design cautions. It distinguishes confirmed Z86C9333FSC characteristics from unavailable electrical details so procurement and engineering decisions can be made without inventing package, pin, or lifecycle information.

Permintaan RFG Kontak
Z86C9333VSC - 33MHz ROMless 8-Bit MCU | Zilog
Z86C9333VSC

Z86C9333VSC - 33MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9333VSC is a ROMless 8-bit CMOS Z8 microcontroller operating at up to 33 MHz and housed in a 44-pin plastic leaded chip carrier package. It is designed for embedded control applications requiring dedicated arithmetic peripherals, multiple timers, flexible I/O, and external program memory. A ROMless microcontroller is an application-specific processor whose firmware is stored outside the device, normally in external ROM, flash, or another memory device. The Z8 belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, and semiconductor control devices. This architecture gives designers control over program size and upgrade strategy while retaining a compact, deterministic instruction set for control-oriented products. The Z86C93 family combines a 33 MHz operating rate with a hardware 16-bit by 16-bit multiplier, a 32-bit-by-16-bit divider, and three 16-bit counter timers. Additional features include a capture register and a fast-decrement mode. These peripherals reduce execution overhead in motor control, measurement, signal processing, and industrial equipment where multiplication, division, event capture, or periodic timing is performed frequently. Because the device is ROMless, the complete memory interface and external program-memory requirements must be evaluated during PCB design. The MCU also requires an external clock and supporting reset circuitry according to the manufacturer reference design. Designers should preserve signal-integrity margins on clock, reset, address, and data paths, especially when the controller operates close to its maximum clock frequency. Typical uses include industrial controllers, embedded timers, keypad interfaces, motor or stepper-control logic, data-acquisition equipment, and compact control modules. The arithmetic accelerator is particularly useful in proportional-control loops, scaling operations, pulse calculations, and sensor-conditioning algorithms that would otherwise require multiple software instructions. Package compatibility is the primary replacement consideration. A replacement should use the same 44-pin PLCC footprint and preserve the same pin functions, clock expectations, external-memory interface, and peripheral resources. Software migration also requires compatible instruction behavior, interrupt structure, I/O registers, and timing characteristics; package matching alone does not guarantee functional interchangeability. This page combines the Zilog device specifications with same-package family options, application guidance, package constraints, and engineering-oriented comparison criteria. These details help engineers distinguish a true PCB-level drop-in replacement from a functionally similar microcontroller that would require software, firmware, or hardware changes.

Permintaan RFG Kontak
Z86C9333VSG - 8-Bit 33MHz ROMless MCU | IXYS
Z86C9333VSG

Z86C9333VSG - 8-Bit 33MHz ROMless MCU | IXYS

The IXYS Z86C9333VSG is an 8-bit, 33 MHz ROMless Z8-series microcontroller packaged in a 44-lead J-leaded LCC measuring 16.6 mm by 16.6 mm. It operates from a 4.5 V to 5.5 V supply and is intended for embedded control systems requiring an external memory interface, compact surface-mount construction, and a moderately high operating clock. A microcontroller is a programmable semiconductor that integrates a CPU, memory interfaces, I/O ports, timers, and peripheral functions on one device. The Z8 family belongs to the broader hierarchy of 8-bit microcontrollers, embedded processors, semiconductor integrated circuits, and electronic control components. A ROMless configuration means the device does not contain its final program storage internally; an external memory device is therefore part of the complete embedded design. Key characteristics include the 8-bit CPU architecture, 33 MHz maximum clock, ROMless program-memory architecture, and 4.5 V to 5.5 V operating supply. Its 44-LCC J-lead package supports compact industrial, consumer, and embedded-control assemblies without relying on a fine-pitch BGA package. The package is identified as surface-mount technology and uses J-shaped terminals designed for board attachment and mechanical inspection. The device is specifically described as a Z8-series microcontroller and as an embedded controller. Its operating architecture allows firmware and data to be organized in external memory, which can provide flexible field-programmable behavior, reusable platform designs, and separation between application code and the microcontroller package. At 33 MHz, the processor is suited to control loops, human-interface tasks, protocol handling, and supervisory functions that require more scheduling headroom than a basic low-speed microcontroller. Typical applications include industrial machine controls, instrumentation panels, motor and actuator supervisory systems, building-control interfaces, programmable logic controllers, and compact embedded control products. The 4.5 V to 5.5 V supply range is suitable for regulated 5 V system rails. Designs should provide suitable external program and data memory, power decoupling, oscillator circuitry, and a reset arrangement appropriate to the selected Z8 memory interface. The primary engineering consideration is that ROMless operation requires additional memory and careful bus implementation. Place the external memory, controller, and associated routing as a coordinated subsystem, following the pin-description and reference-circuit guidance in the manufacturer datasheet. Confirm signal timing and memory-map compatibility before PCB release because the CPU clock, external memory access, and I/O behavior must operate as one consistent design. This page consolidates verified package, clock, supply, architecture, and lifecycle information into an engineering-oriented product record. It also separates confirmed Z86C9333VSG characteristics from unresolved memory and peripheral details, compares related Z8 devices, and highlights practical verification steps for external-memory, decoupling, and pinout decisions.

Permintaan RFG Kontak
Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog
Z86C9533VSC

Z86C9533VSC - CMOS Z8 DSP Microcontroller | Zilog

Zilog Z86C9533VSC is a CMOS Z8 microcontroller with an embedded digital signal processor, combining general-purpose microcontroller control with dedicated DSP processing in a 84-pin leadless chip carrier package. It belongs to the Z8 family of highly integrated embedded controllers designed for applications requiring both digital control and real-time signal processing. The Z86C95 architecture is ROMless, allowing program storage and boot code to be implemented in external memory. A digital signal processor, commonly abbreviated as DSP, is a semiconductor architecture optimized for operations used in signal processing, including multiplication, accumulation, filtering, waveform generation, and spectral analysis. The Z8 MCU hierarchy combines a conventional embedded-control environment with an embedded DSP engine. This integration can reduce the need for separate processor packages when a system must perform control functions and process sampled or generated signals concurrently. The principal identifiable features of the Z86C9533VSC are its CMOS construction, Z8 single-chip microcontroller architecture, embedded DSP processor, ROMless configuration, and 84-pin LCC package. Its integration is useful when a product needs deterministic embedded control alongside digital signal-processing functions. Exact processor clock, memory, I/O, electrical limits, temperature range, and package dimensions must be confirmed against the manufacturer datasheet before schematic capture or firmware development. The Z86C9533VSC belongs to the Z86C95 MCU family, which combines microcontroller functionality with an embedded DSP processor. A ROMless architecture generally requires external program memory, so designers should plan the memory interface, reset behavior, bus timing, and firmware loading method as an integrated part of the system architecture rather than treating memory as an afterthought. Firmware development also requires the correct Z8 toolchain, device programming method, interrupt configuration, and peripheral initialization sequence. Typical uses include digital audio and communications, industrial signal conditioning, motor and motion control, communications equipment, and embedded systems that combine a control loop with real-time waveform processing. The LCC-84 format provides many external connections compared with a small leaded microcontroller package, making it suitable for systems requiring multiple peripheral, bus, and control signals while still allowing board-level miniaturization. PCB implementation requires careful attention to exposed-pad or thermal requirements if present, supply decoupling, signal integrity, and programming access. Because this is a fine-pitch leadless package, verify land geometry and assembly tolerances against the manufacturer package drawing. A new design should also confirm peripheral multiplexing and pin assignments in the datasheet rather than inferring them from the larger Z8 family. This product page organizes the available Z86C9533VSC identity, packaging information, sourcing path, and engineering considerations. It also separates documented facts from unverified numeric details, helping engineers move from part selection to datasheet verification without relying on assumptions about clock speed, memory size, or electrical performance.

Permintaan RFG Kontak
Z86C9620PSC - 20MHz ROMless 8-Bit Z8 MCU | Zilog | 64-Pin SDIP
Z86C9620PSC

Z86C9620PSC - 20MHz ROMless 8-Bit Z8 MCU | Zilog | 64-Pin SDIP

The Zilog Z86C9620PSC is a CMOS 8-bit Z8 microcontroller that operates at up to 20 MHz, uses a ROMless architecture requiring external program memory, and is supplied in a 64-pin rectangular SDIP through-hole package in the commercial temperature grade. The device belongs to Zilog's Z8 family of Z80-derived controllers, which combine an 8-bit CPU core with on-chip peripherals and external code/data memory interfaces. The "PSC" ordering code identifies the plastic 64-pin DIP outline, the commercial temperature range, and the surface-mount-compatible leadless-free pin count used in through-hole industrial and commercial control boards. A microcontroller is a complete single-chip computer: it integrates a CPU core, non-volatile program storage, RAM, timers, serial interfaces, and I/O ports on one die. Within the Z8 family the key architectural option is "ROMless", meaning the device contains no internal program memory and instead fetches code from an external EPROM or Flash memory chip through the address/data bus. That choice frees board space and lets the designer select code density independently, at the cost of one or two extra memory components and bus routing complexity. Key features of this part include a 20 MHz maximum clock frequency, an 8-bit CMOS CPU core, a 64-pin through-hole package that is easy to hand- and machine-solder, and a broad set of on-chip I/O and timer resources typical of the Z8 line. Because the Z8 core is a Z80 derivative, existing Z80 assembler toolchains and Z8 application notes can be reused, shortening the learning curve for teams migrating from legacy 8-bit designs. Architecturally, the Z86C9620 combines a pipelined 8-bit CPU with an external bus capable of addressing external code and data memory, plus dedicated port pins, timer/counter blocks, and serial peripheral interfaces. Clocking is externally supplied, so a crystal or oscillator network is required to reach the 20 MHz operating point; the maximum frequency is a datasheet limit rather than a guaranteed operating point for every peripheral configuration. Run-time behaviour depends on the external memory map, so the same silicon can serve very different products purely through firmware and memory sizing. Typical deployments include industrial control panels, burner or programming stations, appliance controllers, HVAC and building-automation modules, motor and relay sequencers, instrument front panels, and legacy equipment retrofits where a 20 MHz 8-bit CPU with external program memory is sufficient. Because the package is a through-hole SDIP, the part is also well suited to prototypes and small production runs assembled on through-hole assembly lines. The main design consideration for this controller is external memory: the board must provide a working EPROM or Flash device with a stable address and data bus, correct wait-state timing if the memory is slower than the CPU, and decoupling close to the memory pins. Because the 64-pin DIP footprint exposes both address and data lines, board layout must keep the bus short and clean, and unused port pins should be tied to defined levels so that reset behaviour stays deterministic.

Permintaan RFG Kontak
Z86C9620VSC - 20MHz ROMless 8-Bit MCU | Zilog
Z86C9620VSC

Z86C9620VSC - 20MHz ROMless 8-Bit MCU | Zilog

The Zilog Z86C9620VSC is a Z8 ROMless 8-bit microcontroller operating at up to 20 MHz in a 68-pin PLCC package. The device provides 16 Kbytes of ROM-family program space and 256 bytes of RAM according to the Z86C61/62/96 microcontroller family description. Its key characteristics are the 8-bit architecture, 20 MHz operating frequency, ROMless configuration, and 256-byte RAM. The Z86C9620VSC is intended for embedded control designs that require external program memory while retaining the compact timing and peripheral resources associated with the Z8 family. A ROMless microcontroller is an 8-bit MCU architecture in which the application program is stored in external memory rather than embedded ROM. The Z86C9620VSC is part of the Zilog Z8 single-chip microcontroller family, which sits within the broader hierarchy of microcontroller, embedded processor, and semiconductor categories. External program memory allows the implementation to use the MCU with a separate memory device, a configuration useful for products whose firmware size or update requirements differ from a fixed-ROM design. The most important engineering features are the 20 MHz maximum operating frequency, 8-bit CPU, ROMless organization, 16 Kbytes of ROM-family capacity, and 256 bytes of RAM. These specifications make the device suitable for embedded control, industrial interface, appliance control, and legacy peripheral-control designs. The PLCC package provides a 68-pin mechanical format and is intended for through-hole board assembly rather than a compact surface-mount land pattern. The Z8 architecture provides a simple execution environment for control logic, timers, serial communication, and peripheral interfacing. Because the device is ROMless, the external memory interface and associated address, data, and control routing are central to the hardware design. Board designers should use the manufacturer pin-description table when assigning signals, because the exact peripheral mapping and alternate-function details for the selected package must be followed precisely. Typical applications include industrial equipment controllers, legacy communication adapters, printer and appliance control boards, embedded instrumentation, and system-control modules. The 20 MHz clock rate provides more timing headroom than slower general-purpose 8-bit controllers, while the 256-byte RAM supports short working buffers, state variables, and stack-intensive control routines. External program memory is the principal tradeoff compared with a ROM-equipped MCU. For a new PCB, preserve the 68-pin PLCC footprint and route the external memory bus away from sensitive analog or communication nodes. Confirm the oscillator, reset, power, programming, and memory interface requirements against the manufacturer datasheet. If software or production tooling depends on a specific Zilog toolchain, validate tool and programmer support before committing to the device. This page combines the Z86C9620VSC device identity, package information, engineering selection guidance, practical design notes, and verified manufacturer-family references for embedded product planning. Use the exact Z86C9620VSC ordering code and the manufacturer datasheet for production release, programming, and manufacturing documentation.

Permintaan RFG Kontak
Z86C9620VSG - 20MHz ROMless 8-Bit MCU | Zilog | PLCC-68
Z86C9620VSG

Z86C9620VSG - 20MHz ROMless 8-Bit MCU | Zilog | PLCC-68

The Zilog Z86C9620VSG is a Z8 Z8 8-bit ROMless microcontroller operating at a core speed of 20 MHz. It is packaged in a 68-pin PLCC surface-mount package and is designed for embedded control systems requiring numerous general-purpose I/O pins, external memory interfacing, and serial communications. The Z86C9620VSG provides 52 general-purpose I/O pins, 236 x 8 bytes of RAM, EBI/EMI connectivity, and UART/USART communication capability. Its operating supply range is 3 V to 5.5 V, supporting both 3.3 V and 5 V system designs. Because the device is ROMless, application code must be stored in external program memory or loaded through the system programming path defined by the Z8 family. The 20 MHz Z8 architecture provides substantially greater processing headroom than conventional 8-bit microcontrollers used in simple appliance controllers. The large PLCC-68 footprint is useful when a design requires many discrete digital signals while remaining serviceable and compatible with leaded-style assembly processes. The PLCC package also exposes the external bus and communication functions required by larger industrial control boards. Typical applications for the Z86C9620VSG include industrial automation equipment, motor and motion controllers, peripheral controllers, instrumentation interfaces, and legacy Z8 system upgrades. The EBI/EMI interface is particularly useful when the controller must communicate with external memory, data acquisition components, or custom peripherals. UART/USART connectivity supports service consoles, external transducers, and host-controller links. When designing around this device, confirm the external program-memory interface, programming method, pin multiplexing, and clock requirements against the manufacturer datasheet before layout release. Because the package is a 68-pin PLCC, the footprint, thermal exposure, and assembly process must be validated during PCB layout. This page also consolidates the confirmed device specifications, package information, application guidance, and drop-in replacement findings into one engineering reference.

Permintaan RFG Kontak
Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog
Z86E0308PSG

Z86E0308PSG - 8-Bit Z8 OTP MCU, 8MHz | Zilog

The Zilog Z86E0308PSG is an 8-bit Z8 CMOS microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and support for 3.3 V or 5 V operation. It is packaged in an 18-pin PDIP. The device belongs to the Zilog Z8 family of small-format embedded microcontrollers designed for cost-sensitive control, monitoring, and simple peripheral-control applications. Its compact memory footprint, integrated digital control functions, and dual-voltage operation make it suitable for designs that need deterministic control without a larger application-specific processor. An OTP microcontroller stores programmed logic permanently, so the Z86E0308PSG is appropriate for finished products whose control firmware does not need field updates. The Z8 architecture uses an 8-bit instruction-oriented design and is commonly used for appliance controls, industrial interfaces, sensor conditioning systems, and embedded automation equipment. Its 3.3 V and 5 V capability helps designers support multiple supply environments without changing the controller family. The manufacturer identifies the Z86E0308PSG as an 8-bit MCU with 512-byte OTP memory and an 8 MHz maximum operating frequency. The 18-pin PDIP package provides a through-hole option for prototypes, educational designs, and production assemblies where leaded components are preferred. Because the exact peripheral allocation, electrical limits, pin names, and timing details are not listed in the retrieved product descriptions, engineers should use the Zilog Z86E03/E06 CMOS Z8 OTP Microcontrollers datasheet for the definitive pinout and timing reference. Typical implementations include simple motor and relay controllers, temperature and industrial monitoring units, keyboard interfaces, LED status panels, and low-cost embedded equipment. The 512-byte OTP limit is most suitable for compact control loops rather than protocol-heavy gateways, data logging, or applications requiring substantial RAM. In those designs, the MCU can handle discrete input decisions, timing, and peripheral coordination while external components provide sensing, actuation, communications, or power regulation. For a new layout, verify the 18-pin PDIP footprint, oscillator requirements, reset behavior, input thresholds, and programming procedure against the manufacturer datasheet before committing the PCB. Use the Request a Quote form on this page to request current commercial availability, lead time, and ordering information.

Permintaan RFG Kontak
Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog
Z86E0308SSG

Z86E0308SSG - 8-Bit 8MHz OTP Microcontroller | Zilog

Zilog Z86E0308SSG is an 8-bit Z8 microcontroller with 512 bytes of one-time-programmable memory, an 8 MHz operating frequency, and a 3 V to 5.5 V supply range. The device is packaged in an 18-pin SOIC with a 300 mil body width for through-hole assembly compatibility. It combines a compact embedded-control footprint with OTP program memory for cost-sensitive, low-volume embedded products. An 8-bit microcontroller is a compact computing device designed to execute control logic, monitor inputs, and drive outputs within appliances, instruments, and industrial equipment. The Z86E0308SSG belongs to the Z8 microcontroller family, combining a processor core, OTP program memory, timers, and serial I/O in one package. This architecture suits sequential control tasks where deterministic behavior and low component count matter more than high-bandwidth processing. Principal characteristics include an 8 MHz clock, 512 bytes of OTP program memory, and operation across a 3 V to 5.5 V supply range. Its 18-pin SOIC-18-300mil package supports conventional PCB assembly and inspection. The industrial temperature classification, gull-wing terminal arrangement, and rectangular package geometry are useful constraints when laying out a new board or sourcing a mechanically similar replacement. The Z8 architecture is intended for embedded control rather than high-volume data processing. One-time-programmable memory makes the programmed version of the device suitable for products whose firmware does not require field updates. Because the memory cannot be rewritten after programming, production programming, blank-device handling, and firmware revision control must be planned before devices reach the assembly line. Typical uses include small appliance controllers, instrumentation front ends, industrial control modules, sensor interfaces, and dedicated timing or sequence-control products. In these applications, the MCU can evaluate digital inputs, operate timers, update displays, and communicate with external peripherals while keeping the external component count and board area modest. When designing a board, verify the exact pin assignments, port capabilities, oscillator requirements, and programming interface against the manufacturer datasheet before routing signals. The 300 mil SOIC body is wider than a narrow 150 mil SOIC, so component clearance, connector placement, and assembly tooling must accommodate the specified package rather than a generic 18-pin footprint. This page consolidates distributor specifications, package constraints, drop-in comparison information, and application-level engineering guidance. It also distinguishes documented parameters from values that must be confirmed with Zilog before schematic release, helping designers move from part selection to a controlled PCB and firmware implementation.

Permintaan RFG Kontak
Z86E0408PEC - 8-Bit 1KB OTP Microcontroller | Zilog
Z86E0408PEC

Z86E0408PEC - 8-Bit 1KB OTP Microcontroller | Zilog

The Zilog Z86E0408PEC is an 8-bit Z8 microcontroller with 1KB of one-time-programmable program memory, 125 x 8 bits of RAM, 14 I/O pins, and an 8 MHz operating speed, packaged in an 18-DIP enclosure. Its compact architecture is intended for simple embedded-control tasks where a dedicated controller, limited program storage, and a modest peripheral set are sufficient. A microcontroller is a programmable semiconductor that integrates a processor core, memory, I/O ports, and supporting control logic on one integrated circuit. In the broader semiconductor hierarchy, the Z86E0408PEC belongs to the 8-bit microcontroller class and the Z8 family from Zilog. It is a general-purpose embedded controller rather than a dedicated analog, power, or communications component. The principal features visible in the manufacturer documentation are 1KB of one-time-programmable memory, 125 x 8 bits of RAM, and 14 available I/O lines. The 8 MHz operating speed provides the basic execution rate for control loops, input scanning, output updating, and simple state-machine logic. One-time-programmable memory is appropriate for products whose firmware is finalized before deployment and does not need field reprogramming. The Z8 architecture supports embedded product designs that need deterministic control, readable I/O organization, and low-complexity firmware. Because the device has only 1KB of OTP program memory, application code must be compact and carefully structured. Its 125-byte RAM limits buffered data and stack depth, so design decisions should account for call depth, variables, and any temporary state before code is committed to one-time-programmable memory. Typical uses include appliance controls, small industrial modules, simple sensor interfaces, building-control peripherals, and compact embedded products with discrete inputs and outputs. The 18-DIP package also supports through-hole prototyping and repair-friendly assembly. Because the exact peripheral complement, supply limits, and programming interface must be confirmed in the Zilog datasheet before layout release, a new design should not infer those details from the device family name alone. A key design practice is to validate oscillator, reset, programming, and I/O arrangements against the official pin description and application information before placing the PCB. Engineers should also reserve programming access and confirm the supported development environment. Once firmware size approaches the 1KB limit, reducing tables, nested calls, and unnecessary library code can preserve functional margin. This product record combines the Z86E0408PEC's documented memory, I/O, speed, and package characteristics with practical guidance on code-size planning, prototyping, and procurement. It is intended to help engineers identify the correct device quickly while clearly separating confirmed specifications from parameters that require confirmation from the manufacturer documentation.

Permintaan RFG Kontak
Z86E0408SEC 8-Bit 8MHz 1KB OTP MCU | Zilog
Z86E0408SEC

Z86E0408SEC 8-Bit 8MHz 1KB OTP MCU | Zilog

Zilog Z86E0408SEC is an 8-bit embedded microcontroller operating at up to 8 MHz, with 1 KB of one-time-programmable program memory and an 18-pin SOIC package. The Z8 architecture combines a compact general-purpose MCU format with OTP program storage for cost-sensitive embedded control designs. An 8-bit microcontroller is a compact processing platform intended for control-oriented products that monitor inputs, operate actuators, and manage system functions through embedded software. Within the semiconductor hierarchy, the Z86E0408SEC belongs to the Z8 microcontroller family, an embedded processor and system-controller category designed for dedicated appliances, industrial controls, and simple electronic equipment. The principal device characteristics are an 8-bit CPU, an 8 MHz maximum clock, and 1 KB of OTP program memory. The 18SOIC package supports conventional surface-mount PCB assembly. OTP memory provides a secure one-time programming method for fixed firmware, which can simplify product configuration and prevent routine field reprogramming. Other electrical, timing, peripheral, environmental, and package dimensions require confirmation from the manufacturer datasheet before design release. Z8 devices are commonly evaluated for small control loops rather than high-throughput embedded processing. At an 8 MHz operating rate, the processor is suited to sequential logic, button and switch handling, status indicators, and supervisory functions. Firmware size and execution timing should be checked against the 1 KB OTP limit, while final timing margin must include peripheral setup and interrupt-handling overhead. Typical design uses include compact appliance controls, industrial interface modules, instrumentation peripherals, and small embedded controllers that require deterministic one-time-programmed firmware. The 18SOIC footprint is practical for through-board assembly and designs that favor a conventional small-outline package over a larger fine-pitch controller package. Design planning should begin with the pin description table, electrical limits, clock requirements, and programming procedure in the manufacturer datasheet. Confirm the operating-voltage range, available I/O count, oscillator configuration, reset requirements, and programming connector details before final schematic capture. PCB layouts should reserve space and isolation for the programming interface because OTP devices cannot be updated after programming. This product page consolidates the verified device identity, architecture, memory configuration, clock rate, package format, lifecycle information, sourcing workflow, and practical design guidance. It also distinguishes the documented Z86E0408SEC from unverified substitutes and explains why footprint-compatible alternatives require separate pin, function, memory, timing, and programming verification.

Permintaan RFG Kontak
Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog
Z86E0412PEC

Z86E0412PEC - 8-Bit 1KB OTP Z8 MCU, 12MHz, PDIP-18 | Zilog

The Zilog Z86E0412PEC is an 8-bit CMOS Z8 one-time-programmable (OTP) microcontroller with 1KB (1K x 8) of OTP program memory, an operating frequency of 12 MHz, and an 18-pin PDIP through-hole package. It targets cost-sensitive, high-volume designs where a masked-ROM microcontroller would be uneconomic but where OTP simplicity still allows full software development, debug and prototyping. What is the Z8 MCU? A Z8 is an 8-bit RISC microcontroller core from Zilog that forms the basis of the Zilog MCU product family, sitting above the general class of 8-bit microcontrollers and below the broader embedded-controller category. ZiLOG positions these devices for consumer, automotive, security and HVAC applications where a small amount of code, low cost and simple one-time programming are the deciding factors. Key features of the Z86E0412PEC include 1KB of OTP ROM, 12 MHz maximum clocking, a Z8 CMOS CPU core with an internal oscillator and external crystal oscillator options, and a complete set of general-purpose I/O for sensing and driving. As an OTP device, the program memory is written once at the programming step, which removes the need for a masked-ROM order and sharply reduces unit cost in production volumes. The device is a standard Z86E04/E08 family member. Program development is typically performed on the same OTP silicon that ships in production, using the Z8 development tools and Zilog application notes for peripheral setup. Because it is OTP rather than flash, firmware changes after programming are not possible, so all functional qualification should be completed on production-intent units before the programming step. Typical applications include building-block security controllers, thermostat and HVAC control panels, appliance control boards, security keypad and access modules, motor and valve controllers, and simple consumer products with short, deterministic firmware. When designing around the Z86E0412PEC, respect the 18-pin PDIP footprint and the Z8 port mapping when allocating PCB tracks. Confirm oscillator component selection, reset behaviour and I/O drive capability against the pin descriptions in the manufacturer datasheet before layout is frozen. This page consolidates manufacturer documentation, distributor availability, drop-in replacement candidates, and practical design notes for the Z86E0412PEC, giving engineers a single reference for sourcing, pin assignment and second-source strategy.

Permintaan RFG Kontak