Sirkuit Terpadu

DSPIC33EV128GM006-E/PT

DSPIC33EV128GM006-E/PT - 16-Bit 5V DSC 60MIPS 64-TQFP | Microchip

The Microchip Technology DSPIC33EV128GM006-E/PT is a 16-bit 5V digital signal controller (DSC) delivering 60 MIPS from a 128 KB ECC Flash (43K x 24) and 8 KB RAM, housed in a 64-pin TQFP (10x10x1 mm) package with extended temperature operation from -40C to +125C. A digital signal controller combines the computational power of a digital signal processor with the peripherals and ease of use of a microcontroller. In the power-management hierarchy, the dsPIC33EV family sits within Microchip's 16-bit dsPIC DSC line, designed specifically for real-time embedded control such as digital power conversion, safety motor control, and sensor conditioning in harsh environments including automotive, appliance, and industrial systems. Key differentiating features include the robust 5V core operating at 4.5V to 5.5V, which removes the need for a separate low-voltage rail in noisy industrial and automotive power stages. On-chip analog integration is substantial: a 36-channel 10/12-bit ADC, three analog comparators/op-amp blocks, and a CTMU (Charge Time Measurement Unit) for capacitive touch and precise timing measurements. The communications suite covers SENT (SAE J2716) for automotive sensor interfaces, CAN, UART, SPI, and I2C. Architecturally, the dsPIC33E core executes DSP-class instructions - MAC, multiply-divide, and dual-fetch DSP operations - at 60 MIPS, supported by six motor-control PWM (MC PWM) channels with complementary outputs, dead-time insertion, and fault protection, enabling safety-oriented motor drives such as brushless DC and PMSM control. ECC Flash protects program memory integrity against single-bit faults, important for automotive applications governed by AEC-Q100 qualification. Typical applications include electric power steering and HVAC blower motor control, appliance inverter compressors, industrial pump and fan drives, automotive sensor modules using SENT, and digital AC/DC power supplies requiring high-voltage noise immunity from the 5V rail. A key design consideration: the 64-TQFP thermal pad area limits continuous dissipation, so verify junction temperature at full 5V/60 MIPS operation using theta-JA from the family data sheet (DS70005144H), especially in sealed enclosures targeting the +125C extended (E) temperature rating. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout guidance, and practical design notes not found in the standard manufacturer datasheet, consolidating verified web data as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM006-I/MR

DSPIC33EV128GM006-I/MR - 16-bit 70 MIPS 5V DSC 64-VQFN | Microchip

The Microchip Technology DSPIC33EV128GM006-I/MR is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS from the dsPIC33EV core, with 128KB (43K x 24) of Flash program memory, housed in a 64-pin VQFN (9x9 mm, MR) package with exposed pad. A digital signal controller combines the computational architecture of a microcontroller with DSP capability, sitting between a general-purpose MCU and a dedicated DSP in the system hierarchy. The dsPIC33EV family targets single-chip embedded control where robust 5V I/O, deterministic interrupt response, and math-intensive loops must coexist - a common requirement in motor drives, power conversion, and harsh-environment sensing nodes. Key features include a 5V-tolerant operating range (the entire dsPIC33EV family is designed for direct 5V industrial environments without level shifting), 70 MIPS peak performance from an on-chip PLL, dual-source peripheral clocking, and a peripheral pin select (PPS) architecture that remaps digital peripherals to arbitrary RPn pins for maximum layout flexibility. On-chip peripherals include motor-control PWM, DMA, brown-out reset, watchdog timer, and power-on reset per the family datasheet. The core executes DSP instructions (MAC, DSP multiply-accumulate) with single-cycle execution, while the 16-bit Modified Harvard architecture keeps deterministic code density high. Functional Safety (FuSa) documentation support makes the device suitable for safety-relevant industrial designs. The -I temperature grade supports -40C to +85C operation. Typical applications include sensorless BLDC and PMSM motor control in appliances, automotive auxiliary systems, industrial power supplies, and analog-heavy 5V sensor interfaces where a 3.3V MCU would require level translators. Designers should budget the exposed thermal pad for solid ground connection and verify Flash programming voltage per the Flash Programming Specification. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design guidance not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM006-I/PT

DSPIC33EV128GM006-I/PT - 16-bit 70 MIPS 5V DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EV128GM006-I/PT is a 16-bit 5V digital signal controller (DSC) that delivers up to 70 MIPS from its dsPIC33EV core, integrating 128KB (43K x 24) of ECC Flash program memory and 8KB of RAM in a 64-pin TQFP (10x10x1 mm) package rated for -40C to +85C operation. A digital signal controller combines the computational architecture of a digital signal processor - including a hardware multiplier, DSP instructions, and a 24-bit program word - with the peripheral set and control logic of a microcontroller. Within the embedded processing hierarchy, a DSC such as the dsPIC33EV family sits between general-purpose microcontrollers and dedicated DSPs, making it well suited to real-time control loops that demand both mathematical throughput and robust, deterministic I/O behavior. Differentiating specifications of this device include the 5V-tolerant operating range that simplifies designs in harsh 12V and 24V industrial and automotive environments without external transceivers, 6 motor-control PWM channels rated for inverter and BLDC drive stages, 3 integrated operational amplifiers that reduce external analog component count and BOM cost, a CTMU (Charge Time Measurement Unit) for capacitive touch and time-based measurement, and a SENT peripheral supporting the SAE J2716 sensor interface used in automotive networks. ECC (error-correcting code) on Flash protects program memory integrity, a key requirement for functional-safety-oriented designs. Architecturally, the dsPIC33EV core executes an enhanced 16-bit instruction set with DSP multiply-accumulate operations, 4 DMA channels, and 7 timers that offload the CPU from data movement and timing tasks. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals to a wide range of I/O pins, although a few functions retain fixed pin assignments per the family data sheet. Typical applications include automotive sensor and touch-control units, BLDC and PMSM motor drives, appliance control boards, power supplies and inverters, and industrial systems exposed to electrical noise and vibration. The 5V-native I/O directly interfaces with legacy industrial logic levels without external level shifters. For design, note that the I-suffix temperature grade covers -40C to +85C; choose the E-suffix (-40C to +125C) for under-hood automotive environments, or the H-suffix for 40 MHz operation. Plan a robust decoupling network on each VDD/VSS pair. This page synthesizes verified distributor pricing, same-footprint drop-in alternatives, and practical design guidance not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV128GM006T-I/MR

DSPIC33EV128GM006T-I/MR - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV128GM006T-I/MR is a 16-bit digital signal controller (DSC) from the dsPIC33EV family delivering up to 70 MIPS at 5V operation, with 128KB (43K x 24) ECC Flash program memory, 8KB RAM, and 53 general-purpose I/O pins in a 64-pin VQFN (9x9 mm) exposed-pad package. A digital signal controller combines the compute capability of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits above basic MCUs for motor control, digital power conversion, and sensing tasks that need multiply-accumulate (MAC) and DSP-style instruction throughput, yet below full DSP-plus-host designs in cost and complexity. Key features include a 16-bit dsPIC33E CPU core pipelined for single-cycle MAC operations, a barrel shifter and multiple internal buses for efficient data handling, 4 direct memory access (DMA) channels that offload data movement from the CPU, and a 36-channel 10/12-bit ADC suited to multi-phase current and voltage sensing. On-chip ECC Flash improves reliability in noisy, harsh environments such as appliances and industrial equipment. The dsPIC33EV GM family is designed to operate reliably under noise and vibration; the 4.5V to 5.5V supply range allows direct connection to industrial 5V rails without an intermediate regulator stage, improving noise immunity compared with 3.3V-only controllers. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, automotive sensor and touch control units, switch-mode power supplies, and digital power factor correction. Design consideration: at 70 MIPS the device draws meaningful dynamic current; a solid ground plane under the exposed pad plus 0.1uF decoupling on each VDD pin is essential. Verify the -40C to +85C industrial operating range against your enclosure derating before finalizing thermal design. This page synthesizes distributor pricing from LCSC and DigiKey, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, with pricing verified as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM006T-I/PT

DSPIC33EV128GM006T-I/PT - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV128GM006T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance from a 5V core with 128KB (43K x 24) ECC Flash program memory and 8KB RAM, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational architecture of a digital signal processor - single-cycle MAC, DSP instructions, dual operand fetch - with the peripheral integration and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33EV family well suited for closed-loop control tasks such as motor control, digital power conversion and sensor signal conditioning in harsh electrical environments. Key differentiating features of this part include its native 5V operating range (4.5V to 5.5V), which provides superior noise immunity compared to 3.3V controllers, and an on-chip analog front end: a 36-channel 10/12-bit ADC, three operational amplifiers and a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing measurements. The device also provides six motor-control PWM channels, SENT peripheral support for automotive sensor interfaces, four DMA channels and seven timers. Architecturally, the dsPIC33EV core executes an enhanced 16-bit instruction set at up to 70 MIPS, with ECC-protected Flash improving functional-safety integrity (the family is designated Functional Safety (FuSa) ready by Microchip). The 128KB ECC Flash is organized as 43K x 24-bit instruction words, matching the DSP-oriented word width. Typical applications include brushless DC and PMSM motor control in appliances, automotive sensor and control units using the SENT interface, switched-mode power supplies, industrial automation nodes, and capacitive touch user interfaces leveraging the CTMU peripheral. Design consideration: because the core runs from 5V, ensure all external digital interfaces tolerate 5V logic levels, or add level shifting when connecting 3.3V peripherals; the ADC reference and op-amp configuration should be verified against the switching noise of on-board power converters. This page synthesizes distributor pricing, drop-in alternatives, design notes, and application guidance not found in the manufacturer datasheet, with pricing as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM102-E/MM

DSPIC33EV128GM102-E/MM - 16-Bit 5V DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EV128GM102-E/MM is a 16-bit 5V digital signal controller (DSC) with a dsPIC33E core running at up to 70 MIPS, 128 KB of ECC flash program memory, and 8 KB of RAM, housed in a 28-pin QFN-S package with exposed pad (EP) and an extended temperature range of -40C to +125C. It is AEC-Q100 qualified for automotive applications. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). In the semiconductor hierarchy, the dsPIC33EV family sits within the 16-bit microcontroller segment, adding a DSP engine (single-cycle MAC, barrel shifter, modulo addressing) that makes it well suited for closed-loop control and signal-processing tasks in a single chip. Key features include the 5V-tolerant operating supply (2.5V to 5.5V), 70 MIPS maximum performance, ECC flash for functional-safety-oriented designs, 4 DMA channels, 7 timers, and an extended (-E) temperature rating. The 5V operation directly interfaces with automotive sensors and industrial signals without level shifting, a major system-level advantage over 3.3V MCUs. Technically, the dsPIC33EV core executes CISC-style 16-bit instructions with DSP enhancements, and the flash memory includes error-correction coding to improve reliability in harsh electrical environments. Clock sources include an internal fast RC oscillator and external crystal options, enabling low-power and low-jitter configurations. Typical applications include automotive sensor and touch-control units, appliance motor control (BLDC/PMSM), industrial power conversion, and harsh-environment HVAC systems where noise, vibration, and wide temperature ranges are present. Design consideration: the exposed pad of the QFN-S package should be soldered to a ground plane for both thermal dissipation and signal integrity, and a low-ESR capacitor on the internal regulator output (VCAP) is required per the family datasheet. This page synthesizes distributor pricing, drop-in alternatives, design notes, and FAQ content not found in a single manufacturer datasheet, as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM102-E/SO

DSPIC33EV128GM102-E/SO - 16-bit 60 MIPS DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EV128GM102-E/SO is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 60 MIPS core performance with 128KB (43K x 24) ECC Flash and 8KB of RAM, housed in a 28-pin SOIC package rated for -40C to +125C extended temperature operation. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the DSP capabilities of a digital signal processor in a single core. In the system hierarchy, a DSC sits above general-purpose MCUs for control-loop tasks requiring fast math - such as field-oriented motor control, digital power conversion, and sensor signal processing - while retaining the peripherals, interrupts, and development ease of a mainstream MCU family. Key features include the 5V-tolerant dsPIC33E core that eliminates level-shifting in automotive and industrial 5V busses, an on-chip CAN module for vehicle networks, SENT peripherals for automotive sensor interfaces, integrated op amps, advanced PWM engines for motor and power control, and ECC Flash for functional safety (FuSa) designs. Technically, the device integrates a 16-bit modified Harvard architecture with DSP multiply-accumulate instructions, hardware MAC acceleration, DMA data transfer, RTC and timers, low-power modes, and secure storage and protection features, per the dsPIC33EVXXXGM00X/10X family data sheet. Typical applications include automotive sensors, touch and control units, BLDC and PMSM motor drives, digital power supplies, and harsh-environment appliances where vibration, noise, and wide temperature ranges rule out 3.3V-only MCUs. Design consideration: verify CAN transceiver compatibility at 5V IO levels and budget Flash headroom - the 128KB density suits code-basess up to roughly 40K instruction words with bootloader and diagnostics. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM102-I/MM

DSPIC33EV128GM102-I/MM - 70MIPS 5V DSC, 128KB Flash | Microchip

The Microchip Technology DSPIC33EV128GM102-I/MM is a 16-bit, 5V digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33EV core, with 128KB (43K x 24) of ECC-protected program flash, 8KB of SRAM, and an integrated CAN 2.0B controller, packaged in a 28-pin QFN-S (6x6 mm) with exposed pad. A digital signal controller combines the compute architecture of a microcontroller with DSP engine features such as a barrel shifter, hardware multiply-accumulate, and DMA. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs for math-intensive, real-time control loops, and the dsPIC33EV family extends this capability into harsh, electrically noisy 5V environments such as automotive and industrial equipment. Key differentiating features include the 5V-tolerant operating range (5.5V maximum VDD), six motor-control PWM channels, three on-chip operational amplifiers, a CTMU (Charge Time Measurement Unit) for capacitive touch and time-domain measurements, and SENT (SAE J2716) peripheral support for automotive sensor interfaces. ECC flash protects code integrity in safety-relevant designs, and the device is positioned by Microchip as Functional Safety (FuSa) capable. Architecturally, the core executes the modified Harvard instruction set with two 40-bit accumulators and four DMA channels, while seven timers (including 16/32-bit and CCP-based timers) handle timing tasks. The CAN module with DMA offload enables robust vehicle and industrial networking without CPU bottleneck. The 70 MIPS figure corresponds to a 60 MHz-class instruction execution environment per third-party listings, making it suitable for field-oriented motor control and digital power conversion. Typical applications include brushless DC and PMSM motor control, automotive sensor and touch-control units, power inverters, battery chargers, and appliance control boards that must survive noisy 12V/24V electrical systems without an external 3.3V rail. Design-wise, use any PGECx/PGEDx pin pair consistently for ICSP programming and connect all VDD/VSS pairs; the VCAP pin requires the datasheet-specified capacitor for the internal regulator. Budget GPIO carefully on the 28-pin package when using CAN, SENT, and multiple op-amp channels simultaneously. This page adds value beyond the datasheet by consolidating distributor stock signals, same-footprint family alternatives, pricing tiers, and practical layout and programming guidance in one AI-citable reference.

Permintaan RFG Kontak

DSPIC33EV128GM102-I/SP

DSPIC33EV128GM102-I/SP - 16-Bit 70MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV128GM102-I/SP is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS from the dsPIC33EV core, with 128KB (43K x 24) ECC Flash program memory, 8KB RAM, and a 28-pin SPDIP through-hole package. A digital signal controller combines the computational architecture of a digital signal processor (multiply-accumulate, DSP instruction set, dual operand fetch) with the peripheral integration and deterministic control of a microcontroller, sitting in the hierarchy between a general-purpose MCU and a dedicated DSP. The dsPIC33EV family extends this concept with a 5V-tolerant core, making it part of the broader 16-bit MCU/DSC product category aimed at electrically noisy environments where 3.3V controllers require extra level-shifting circuitry. Key features include single-cycle MAC and DSP engine operation at 70 MIPS, 128KB of Flash with ECC (error correction code) for functional-safety designs, 4 DMA channels, 7 timers, CAN 2.0B for automotive and industrial networking, SENT and LIN protocol support, on-chip op-amps, and a 12-bit ADC with motor-control PWM peripherals. The Peripheral Pin Select (PPS) system allows remapping of digital peripherals onto many I/O pins, greatly increasing layout flexibility. Technically, the dsPIC33EV core runs from a 4.5V to 5.5V supply (nominal 5.0V) and integrates a DSP engine with two 40-bit wide accumulators, hardware division support, and a fast interrupt system. The Extended-temperature (E) variant options and the robust 5V I/O structure target harsh-environment operation with high noise immunity, electrical fast transient tolerance, and vibration resistance in automotive and appliance applications. Typical applications include automotive sensor and control units, BLDC and PMSM motor control with CAN networking, industrial power supplies and inverters, appliance control boards, and off-road/heavy equipment electronics where a 5V rail directly drives sensors without level translators. Design consideration: because this is the -I/SP industrial-grade, 28-pin SPDIP (through-hole) version, it suits prototyping and rugged boards; for automated SMT assembly, the identical die is available in SOIC and SSOP packages, so consider package variants early in the design cycle. This page synthesizes distributor pricing, drop-in same-family alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet. Pricing references are as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM102T-I/MM

DSPIC33EV128GM102T-I/MM - 16-Bit 70MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV128GM102T-I/MM is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS performance with 128KB (43K x 24) ECC Flash and 8KB RAM, housed in a 28-pin QFN-S (6x6 mm) exposed-pad package. The -I suffix indicates an industrial operating temperature range of -40C to +85C, and the T suffix denotes tape-and-reel packaging. A digital signal controller combines the computational power of a DSP with the peripheral integration and deterministic control behavior of a microcontroller. Within the power-management hierarchy of embedded systems, DSCs occupy the tier between general-purpose MCUs and dedicated DSPs, making them the standard choice for closed-loop motor control, digital power conversion, and sensor-signal-conditioning systems that need multiply-accumulate throughput plus hard real-time peripherals. Key differentiating features include the 5V-tolerant core that directly interfaces with industrial 5V logic and automotive sensor rails without level shifting, ECC Flash that detects and corrects single-bit memory errors for functional-safety (FuSa) designs, and on-chip peripherals explicitly listed for this family: advanced PWM, SENT (SAE J2716) interface, and integrated op amps for analog front-end condensation. Four DMA channels and seven timers offload the CPU from data movement and event timing. Architecturally, the dsPIC33EV core is built on CMOS process technology with a 16-bit modified Harvard architecture, DSP multiply-accumulate instructions, and a barrel shifter. Operating from a 5V supply, the device tolerates harsh electrical environments typical of appliances, industrial drives, and automotive modules where 3.3V-only controllers require additional protection circuitry. Typical applications include BLDC and PMSM motor control in appliances and power tools, automotive body and powertrain auxiliary modules using SENT-connected sensors, industrial automation nodes, and digital power supplies where the complementary-output PWM and analog comparators close control loops in hardware. For design, budget the exposed thermal pad as the primary ground return: connect it to a solid VSS pour with multiple vias to achieve both low thermal resistance and low ground inductance for the analog peripherals. The M/MM QFN pin pitch requires a fine-pitch PCB process; verify land pattern against the Microchip datasheet footprint. This page synthesizes verified distributor data (DigiKey, Mouser, Octopart), drop-in same-family alternatives, and practical design notes not found on the manufacturer product page.

Permintaan RFG Kontak

DSPIC33EV128GM103T-I/M5

DSPIC33EV128GM103T-I/M5 - 16-bit 5V DSC 128KB Flash | Microchip

The Microchip DSPIC33EV128GM103T-I/M5 is a 16-bit digital signal controller (DSC) with a 5V 70 MIPS dsPIC33EV core, 128KB (43K x 24) ECC Flash program memory, and 8KB RAM, housed in a 36-pin UQFN (5x5 mm) exposed-pad package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control-oriented architecture of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, DSCs sit between general-purpose MCUs and dedicated DSPs, offering multiply-accumulate (MAC) and DSP instruction support alongside typical MCU peripherals such as timers, PWM modules, and serial interfaces. The dsPIC33EV family is positioned for harsh-environment industrial and automotive control nodes. Key differentiating features include native 5V operation (eliminating an external level-shifting supply rail in 5V industrial and automotive systems), an on-chip CAN 2.0B controller for vehicular and industrial networks, six motor-control PWM channels for three-phase inverter drive, three on-chip operational amplifiers that reduce external analog BOM count, and a CTMU (Charge Time Measurement Unit) for capacitive-touch and time-domain sensing. SENT peripheral support addresses automotive sensor interfaces. Architecturally, the device executes a modified Harvard instruction set at up to 70 MIPS with a hardware DSP engine supporting single-cycle MAC and dual data fetch. Error-correcting code (ECC) on the 128KB Flash enhances functional-safety integrity, and four DMA channels offload high-bandwidth peripheral data transfers such as ADC sample streams. The CPU clock is supplied up to 60 MHz per Mouser data, corresponding to the family's 70 MIPS rating. Typical applications include brushless DC and PMSM motor control in appliances, automotive body and powertrain auxiliaries using CAN and SENT, digital power supplies, and industrial sensing nodes leveraging the CTMU and op amps. Design consideration: the 36-UQFN 5x5 mm exposed pad is the primary thermal and ground path - a solid ground pour array under the pad is strongly recommended for reliable operation across the -40C to +125C industrial range. This page synthesizes distributor data, same-family drop-in alternatives, and design guidance not found in a single manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM104-E/ML

DSPIC33EV128GM104-E/ML - 16-Bit 5V DSC 128KB Flash CAN | Microchip

The Microchip Technology DSPIC33EV128GM104-E/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EV GM family, combining a 5V-robust dsPIC core delivering up to 60 MIPS (70 MIPS family maximum) with 128KB of ECC Flash program memory and 8KB of RAM in a 44-pin QFN (8x8 mm) package rated from -40C to +125C. A digital signal controller merges the peripheral set and control peripherals of a microcontroller with the mathematical throughput of a DSP, occupying the mid-tier of the embedded processing hierarchy (embedded controller -> DSC -> microcontroller/MCU -> semiconductor). DSCs are the preferred architecture for closed-loop control loops such as field-oriented motor control, digital power conversion, and sensor fusion, where single-cycle multiply-accumulate (MAC) and DSP instructions shorten loop latency without the complexity of a full application processor. Key features of this device include on-die ECC Flash for functional-safety-oriented designs, a 5V tolerant I/O system that survives harsh electrical environments without level shifting, and CAN 2.0B connectivity alongside I2C, SPI, UART/USART, IrDA and LINbus interfaces for in-vehicle and industrial networking. The device integrates 4 DMA channels and 7 timers, offloading data movement and timing tasks from the CPU core. Technically, the dsPIC33EV core executes an enhanced 16-bit instruction set with DSP engine support, and the extended-temperature (E-suffix, -40C to +125C) qualification targets under-hood, appliance and industrial installations subject to vibration, noise and thermal stress. Typical applications include automotive sensors and touch/control units, BLDC/PMSM motor drives for appliances, industrial automation nodes, and CAN-based networking gateways. Design consideration: the 44-QFN exposed-pad package requires a solid ground via array under the die for thermal and electrical performance, and all VDD/VSS pairs must be decoupled with 100 nF ceramics placed close to the pins. This page adds value beyond the manufacturer datasheet by consolidating verified distributor data, same-family drop-in alternatives, application guidance, and selection trade-off analysis in one citation-ready reference.

Permintaan RFG Kontak

DSPIC33EV128GM104-E/P8

DSPIC33EV128GM104-E/P8 - 16-bit 5V DSC 128KB Flash 48-TQFP | Microchip

The Microchip Technology DSPIC33EV128GM104-E/P8 is a 16-bit digital signal controller (DSC) from the dsPIC33EV functional-safety (FuSa) family, delivering up to 60 MHz core operation (70 MIPS family rating) at a robust 4.5 V to 5.5 V supply, with 128 KB (43K x 24) ECC Flash, 8 KB RAM, and a 48-pin TQFP (7x7 mm) package in the extended temperature -40C to +125C (-E) grade. A digital signal controller combines a microcontroller with DSP engine features in a single core, sitting in the hierarchy between general-purpose MCUs and standalone DSPs. DSCs execute control loops (PID, field-oriented motor control) while handling math-heavy signal processing, making them a common choice in power conversion and motion systems where a single-chip solution is preferred. Key features include a 5V-tolerant 16-bit dsPIC DSC core with DSP instructions, 35 general-purpose I/O, onboard CAN 2.0B for robust networking, six motor-control PWM channels, three analog comparators/op-amps, and a CTMU (Charge Time Measurement Unit) for capacitive touch and time measurement. SENT peripheral support targets automotive sensor interfaces. ECC Flash improves functional-safety integrity, aligning with the FuSa positioning of the dsPIC33EV family. Architecturally, the dsPIC33EV core uses a modified Harvard pipeline with hardware DSP multiply-accumulate, dual operand fetch, and bit-reversal addressing for FFTs. The rich analog front end (op-amps, 10/12-bit ADC channels, comparators) reduces external component count in motor-control and power-supply designs. Typical applications include automotive sensor and control units, industrial motor drives, appliance power conversion (washing machines, compressors), and CAN-networked nodes in harsh, electrically noisy environments where 5V noise immunity is decisive. Design consideration: the 5V operating range gives superior EMI robustness versus 3.3 V MCUs, but verify all 5V-level interfacing and observe maximum current ratings on the 35 I/O pins; use all VDD/VSS pairs per the manufacturer datasheet. This page synthesizes distributor pricing (as of 2026-09-26), drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM104-E/PT

DSPIC33EV128GM104-E/PT - 16-Bit 5V DSC, 128KB Flash, 44-TQFP | Microchip

The Microchip DSPIC33EV128GM104-E/PT is a 16-bit, 5V digital signal controller (DSC) from the dsPIC33EV family that delivers up to 70 MIPS of processing throughput while integrating DSP and microcontroller functionality on a single die. The variant ships with 128 KB of ECC Flash (43K x 24), 8 KB of SRAM, a 44-pin TQFP package (10x10 mm, 0.8 mm pitch), and is qualified to AEC-Q100 standards for automotive use. The -E suffix denotes the -40C to +125C extended operating temperature range, and the /PT suffix marks the TQFP-44 package. A digital signal controller (DSC) is a class of embedded processor that combines a microcontroller (MCU) with a digital signal processor (DSP) engine on one chip. DSCs sit in the hierarchy between general-purpose microcontrollers (e.g., Cortex-M) and standalone DSPs, occupying the power-management and motor-control niche where deterministic math, fast interrupt response, and rich peripherals matter more than raw core mark counts. dsPIC33EV is a 5V, automotive-robust line within that hierarchy, designed for harsh electrical and thermal environments. Key features include a 5V supply rail with wide tolerance, on-chip CAN, up to 7 PWM channels for motor drive, a 12-bit ADC with up to 1.1 Msps conversion, op-amps inside the silicon for current sensing, comparators, and an ECC-protected Flash memory array. Functional Safety (FuSa) features such as Windowed Watchdog Timer and CRC accelerators support ISO 26262 ASIL-B oriented designs when paired with the appropriate safety manual. Architecturally, the device uses Microchip's modified Harvard dsPIC DSC core with a single-cycle MAC and barrel shifter, achieving deterministic interrupt latency of 5 cycles per instruction stage. The 5V-tolerant I/O eliminates level shifters in 12V/24V industrial and automotive subsystems, and the ECC Flash improves FIT rates versus uncorrected Flash MCUs. Typical applications include automotive sensors, BLDC/PMSM motor control, appliance control, industrial PLCs, and functional safety systems. The wide 4.5V-5.5V supply and -40C to +125C range suit 12V automotive rails and industrial 24V systems after front-end regulation. When designing with this part, allocate enough program Flash to the application code plus the FuSa library overhead (CRC self-test, watchdog refresh), and verify the motor-control PWM channel mapping against the chosen inverter stage topology.

Permintaan RFG Kontak

DSPIC33EV128GM104-I/ML

DSPIC33EV128GM104-I/ML - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV128GM104-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance from a 5V-tolerant dsPIC33E core with 128 KB (43K x 24) ECC Flash program memory and 8 KB of RAM, housed in a 44-pin QFN (8x8 mm) surface-mount package with exposed pad. A digital signal controller combines the computational strengths of a microcontroller with the mathematical acceleration of a digital signal processor. In the power-management hierarchy, the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs: it executes real-time control loops (PID, field-oriented control, digital power conversion) while also running application logic on a single chip. The dsPIC33EV family is specifically engineered as a 5V-robust DSC with CAN, safety and motor-control peripherals for harsh electrical environments. Key features include the 16-bit 70 MIPS DSP engine with DSP instruction support, single-cycle MAC and barrel shifter, error-correcting code (ECC) Flash for functional-safety designs, an on-chip CAN 2.0B module for automotive and industrial networking, and operation directly from a 5V supply that eliminates level-shifting circuitry common with 3.3V controllers. Per the Microchip product page, the family is ideal for appliances, industrial and automotive applications exposed to noise and vibration. Architecturally, the device uses a modified Harvard architecture with multiple internal buses, a 40 MHz internal core clock yielding 70 MIPS at 5V operation, and hardware DSP support including divide, multiply-accumulate, and barrel-shift instructions. The ECC Flash protects program memory integrity, supporting functional safety (FuSa) design goals noted by distributors. Typical applications include Brushed/BLDC and PMSM motor control, automotive body and sensor modules, CAN-networked industrial control nodes, digital power supplies, and appliance control boards. Design consideration: connect every VDD/VSS pair and the exposed thermal pad to ground for best noise performance and thermal dissipation; multiple PGECx/PGEDx pairs exist for ICSP programming and must be used as matched pairs. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV128GM104-I/P8

DSPIC33EV128GM104-I/P8 - 16-bit 70MIPS 128KB Flash DSC | Microchip

The Microchip Technology DSPIC33EV128GM104-I/P8 is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, featuring a 5V-tolerant dsPIC DSC core delivering up to 70 MIPS, 128 KB (43K x 24) of Flash program memory, and a 48-pin TQFP (7x7 mm) package. A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy of embedded systems, the DSC sits between general-purpose MCUs and dedicated DSPs, and the dsPIC33EV family is Microchip's 5V-robust branch of the dsPIC33E line, purpose-built for electrically noisy environments such as appliances, industrial automation, and automotive subsystems. Key features include the 16-bit 70 MHz CPU core with DSP instruction extensions, integrated CAN module for in-vehicle and industrial networking, hardware functional-safety (FuSa) support, and Peripheral Pin Select (PPS) that allows remapping of digital peripherals onto flexible RPn pins for optimized PCB routing. The 5V operating capability eliminates a level-shifting stage that 3.3V MCUs typically require when interfacing with 5V sensors and actuators. Technically, the device is fabricated in CMOS and includes DMA channels, multiple timers, and high-performance PWM modules suited to motor control algorithms such as field-oriented control. The extended Flash (43K x 24 instruction words) accommodates control loops plus communication stacks, while on-chip RAM supports concurrent signal processing buffers. Typical applications include brushless DC and PMSM motor drives, automotive sensors and touch control units, and appliance power control boards where vibration, noise, and wide temperature ranges are present. When designing with this part, connect all VDD/VSS pairs and reserve one PGECx/PGEDx pair for ICSP in-circuit programming and debugging; PGEC and PGED pins must be used as matched pairs. This page synthesizes distributor pricing context, drop-in alternatives within the dsPIC33EV family, and practical design notes not consolidated in the manufacturer datasheet (DS70005144H).

Permintaan RFG Kontak

DSPIC33EV128GM104-I/PT

DSPIC33EV128GM104-I/PT - 5V 70MIPS 128KB DSC | Microchip

The Microchip Technology DSPIC33EV128GM104-I/PT is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS from the dsPIC33EV core with 128 KB (43K x 24) of ECC Flash program memory and 8 KB of RAM, housed in a 44-pin TQFP (10x10 mm, 0.8 mm pitch) surface-mount package. A digital signal controller is a hybrid device that combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control architecture of a microcontroller (MCU). Within the embedded control hierarchy, the dsPIC33EV family sits in the 16-bit DSC class, positioned for deterministic real-time control loops such as motor commutation and power conversion where both multiply-accumulate DSP throughput and robust I/O are required in a single chip. The 5V-tolerant core allows direct interfacing with 5V industrial sensors and automotive signals without external level shifting, giving it wider noise margins than 3.3V-only competitors. Key features include the dsPIC33EV core operating at 70 MIPS, 128 KB ECC Flash for functional safety support, and the family integrates CAN, advanced PWM, SENT, and on-chip op amp peripherals as stated in the Microchip datasheet. The -40C to +85C industrial temperature rating (I suffix) suits harsh environments, while the ECC Flash detects and corrects single-bit memory errors, supporting functional safety (FuSa) designs. The integrated op amps reduce external component count in current-sense circuits, and the CAN module supports automotive and industrial network topologies directly. The enhanced on-chip feature set targets applications with electrical noise and vibration: the ECC Flash detects and corrects single-bit memory errors, while the 5V core provides wider noise margins than 3.3V competitors. The integrated op amps reduce external component count in current-sense circuits, and the CAN module supports automotive and industrial network topologies directly. The dsPIC33EV core also supports Peripheral Pin Select (PPS), allowing flexible remapping of digital peripherals to physical I/O pins. Typical applications include motor control (BLDC, PMSM, stepper) using the dedicated PWM modules, automotive sensors and control units, appliances operating on noisy mains power, and industrial automation nodes requiring CAN connectivity. Design consideration: the device operates from a single 5V supply; multiple VDD/VSS pairs must all be decoupled with 0.1 uF ceramics, and all PGECx/PGEDx pairs must be kept paired for ICSP programming. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM104T-I/ML

DSPIC33EV128GM104T-I/ML - 16-bit 70MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV128GM104T-I/ML is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance with 128 KB (43K x 24) ECC Flash and 8 KB RAM, powered from a single 4.5 V to 5.5 V supply in a 44-pin QFN (8x8 mm) exposed-pad package. A digital signal controller combines the computational power of a DSP engine with the peripherals, interrupt architecture, and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between a general-purpose MCU and a dedicated DSP: it executes both tight control loops and signal-processing tasks such as motor-control field-oriented control, digital filters, and CAN-based communication stacks in a single chip. Key differentiating features include the 5 V tolerant operating range, which improves noise immunity and sensor interfacing in harsh electrical environments; on-chip CAN networking for automotive and industrial fieldbus connectivity; ECC Flash memory that detects and corrects single-bit errors for functional-safety designs (the part is listed by DigiKey as a Functional Safety (FuSa) qualified device); and 70 MIPS throughput from the dsPIC DSC core with DSP multiply-accumulate instructions. The architecture pairs a 16-bit modified Harvard core with a DSP engine (single-cycle MAC, dual operand fetch), 4 DMA channels that move data between peripherals and RAM without CPU intervention, and 7 timers for PWM generation, event capture, and task scheduling. The 44-QFN exposed-pad package improves thermal dissipation and grounding integrity for high-frequency switching applications. Typical applications include BLDC and PMSM motor control in appliances and industrial drives, automotive body and auxiliary systems with CAN networking, and robust 5 V industrial control nodes where analog peripherals must interface directly with 24 V-adjacent sensing circuitry. A key design consideration is that the core runs up to 70 MIPS at 5 V; decouple the VDD rails with low-ESR ceramics close to the QFN pins and use the exposed pad as a solid ground return to keep switching noise from motor PWM out of the analog front end. This page synthesizes distributor inventory, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM104T-I/PT

DSPIC33EV128GM104T-I/PT - 5V 70 MIPS 128KB DSC | Microchip

The Microchip Technology DSPIC33EV128GM104T-I/PT is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS (60 MHz CPU) with 128KB of ECC Flash and 8KB of RAM, housed in a 44-pin TQFP package (suffix PT) rated for -40C to +85C operation. A digital signal controller combines the compute throughput of a DSP core with the peripheral integration and deterministic interrupt behavior of a microcontroller, sitting within the wider power management and embedded control hierarchy of semiconductor devices. DSCs are the standard choice where closed-loop control loops (motor FOC, digital power, battery management) must execute fast, mathematically intensive algorithms with predictable timing. Key features of the dsPIC33EV128GM104 include a 5V-tolerant robust core designed for harsh electrical environments, an on-chip CAN 2.0B module for automotive and industrial networking, six motor-control PWM channels, three integrated op-amps that reduce external analog component count, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-of-flight measurements, and a SENT peripheral for automotive sensor interfaces. ECC Flash protects program memory against single-bit faults, supporting functional safety (FuSa) development. Architecturally, the device uses a modified Harvard 16-bit pipeline with DSP multiply-accumulate instructions, dual operand fetch, and hardware division, allowing filtering and transform algorithms to run at the full 70 MIPS rate. The rich analog front end (op-amps plus 12-bit ADC) enables direct connection of current shunts and sensor signals. Typical applications include brushless DC and PMSM motor control for appliances and power tools, automotive body and powertrain auxiliary modules using CAN and SENT, industrial sensors, and switch-mode power supplies requiring digital control. Design-wise, exploit the 5V core to simplify interfacing with legacy 5V sensors and reduce BOM cost by removing level shifters; budget careful decoupling (0.1uF per VDD pin plus bulk capacitance) and plan the oscillator source early, since the PLL multipliers determine whether the full 70 MIPS ceiling is reachable. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing selection and comparison value beyond the standard product listing.

Permintaan RFG Kontak

DSPIC33EV128GM106-E/PT

DSPIC33EV128GM106-E/PT - 16-bit 60 MIPS 128KB DSC | Microchip

The Microchip Technology DSPIC33EV128GM106-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV GM family featuring a 5V-robust dsPIC DSC core running at 60 MIPS, 128KB (43K x 24) ECC Flash program memory and 8KB RAM, housed in a 64-pin TQFP (10x10 mm) package with extended temperature range of -40C to +125C. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs in math capability and below dedicated DSPs in cost and complexity, making the dsPIC33EV class ideal for real-time control loops such as motor control, digital power conversion and sensor fusion. Key differentiating features include an on-chip CAN module with 32 buffers, 16 filters and three masks; two SENT (J2716) transmit/receive modules for automotive sensor interfaces; six motor-control PWM channels; up to three on-chip operational amplifiers; a CTMU (Charge Time Measurement Unit) for capacitive touch and time measurement; and a 4-channel DMA controller. Communication coverage is completed by UART with LIN/J2602 and IrDA support (25 Mbps without PPS) and one I2C module up to 1 Mbaud with SMBus support. The 5V-tolerant architecture is the defining trait of the dsPIC33EV family: operating directly from automotive and industrial 5V rails eliminates a level-shifting stage, improves noise immunity in harsh electromagnetic environments, and simplifies analog front-end design. ECC Flash protects program memory integrity for functional-safety (FuSa) oriented designs. Typical applications include automotive sensor and control units, brushless DC and PMSM motor drives, digital power supplies, appliances operating in vibration and noise, and industrial automation nodes with CAN connectivity. Design consideration: at 60 MHz core frequency, ensure a clean 5V supply with decoupling at every VDD/VSS pair and place a 10 uF bulk capacitor near the regulator output; the CTMU and op-amp peripherals require careful analog grounding. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV128GM106-I/MR

DSPIC33EV128GM106-I/MR - 16-bit 5V 70 MIPS DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EV128GM106-I/MR is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS performance with 128KB of ECC-protected Flash program memory and 8KB of RAM, housed in a 64-pin VQFN (MR) package measuring 9x9 mm for surface-mount assembly. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral set and control logic of a microcontroller (MCU) in a single chip. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs, offering hardware multiply-accumulate units and DSP-style instructions for real-time control loops, filtering, and transform calculations while retaining MCU-grade peripherals like UART, SPI, I2C, and CAN. Key features of this device include a robust 5V operating supply that directly tolerates harsh electrical environments without a 3.3V regulator, on-chip CAN peripheral for automotive and industrial networks, SENT module for sensor interfaces, high-resolution PWM outputs for motor control and power conversion, and integrated op amps with advanced analog features that reduce external component count. Architecturally, the CMOS dsPIC33EV core pairs a 16-bit modified Harvard pipeline with DSP engine instructions, a barrel shifter, and ECC Flash for functional-safety-oriented designs. According to Microchip product documentation, the family is specifically targeted at appliances, industrial, and automotive applications exposed to noise and vibration. Typical applications include brushless DC (BLDC) and permanent magnet synchronous motor (PMSM) control, automotive sensor and touch control units, switched-mode power supplies, and industrial automation nodes communicating over CAN. Design consideration: the 5V rail simplifies BOM design in electrically noisy systems, but verify that any 3.3V-only companion devices in the design include level shifting, since most dsPIC33EV I/O is not 5V-tolerant in reverse. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet, with data verified as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM106-I/PT

DSPIC33EV128GM106-I/PT - 70 MIPS 5V 128KB ECC Flash DSC | Microchip

The Microchip Technology DSPIC33EV128GM106-I/PT is a 16-bit digital signal controller (DSC) featuring a 5V, 70 MIPS dsPIC33E CPU, 128KB of ECC Flash program memory (43K x 24) and 8KB of RAM, packaged in a 64-pin TQFP (10x10 mm, 0.5 mm pitch). It operates from a single 4.5V-5.5V supply and is qualified for the -40C to +125C industrial temperature range per the -I suffix. A digital signal controller (DSC) is a hybrid device that combines the deterministic control architecture of a microcontroller with the deterministic math throughput of a digital signal processor. Within the power and signal-processing taxonomy, the DSC sits above general-purpose microcontrollers and below dedicated DSPs, occupying the niche where closed-loop control loops (motor control, power conversion, sensor fusion) benefit from hardware multiply-accumulate (MAC) and barrel-shifter instructions on a 16-bit datapath. The dsPIC33EV family in particular targets robust 5V operation with ECC Flash for functional-safety use cases. Key features include execution at up to 70 MIPS from a 5V rail, hardware CAN, 4 DMA channels, 7 timers, and dedicated motor-control PWM peripherals. The 128KB of ECC Flash provides single-bit error correction and dual-bit error detection, which is essential for automotive and industrial functional-safety designs governed by IEC 61508 and ISO 26262. A 16-channel 12-bit ADC, op-amp comparators and a 5 ns comparator complete the analog front end. The dsPIC33E core implements a Harvard architecture with a 16-bit instruction word and DSP-aware extensions, including a single-cycle MAC and a 40-bit accumulator, allowing fractional DSP arithmetic alongside integer MCU operations. Peripheral Pin Select (PPS) provides extensive I/O remapping flexibility, freeing the designer from rigid pin-function assignments. Typical applications include automotive sensor and touch-control units, industrial motor drives with CAN networking, appliance controllers in high-electrical-noise mains environments, and functional-safety subsystems where ECC Flash and self-test libraries reduce external watchdog complexity. The 5V-tolerant design minimizes level-shifting when interfacing to legacy 5V sensors. Design consideration: connect all VDD/VSS pin pairs and use any matched PGECx/PGEDx pair consistently for ICSP programming and debugging, because Microchip's programming guidelines require the clock and data pins to come from the same pair. Decouple each VDD with a 0.1 uF ceramic plus a bulk tantalum placed within 5 mm of the pin. This page synthesizes distributor pricing context, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV128GM106T-I/MR

DSPIC33EV128GM106T-I/MR - 16-bit 70 MIPS 5V DSC 128KB Flash | Microchip

The Microchip Technology DSPIC33EV128GM106T-I/MR is a 16-bit dsPIC33EV digital signal controller (DSC) delivering up to 70 MIPS performance from 128 KB (43K x 24) of ECC Flash program memory and 8 KB of RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package with 53 general-purpose I/O pins. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power management hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs, making the dsPIC33EV family a single-chip solution for motor control, digital power conversion, and sensing systems that require both math throughput and robust industrial I/O. Key features of the DSPIC33EV128GM106T-I/MR include 5V operation (4.5V to 5.5V supply range), which provides superior noise immunity in harsh electrical environments compared to 3.3V controllers, and Error-Correcting Code (ECC) Flash that protects program memory integrity. The part carries Functional Safety (FuSa) support documentation per Microchip, easing certification-oriented designs. The 64-VQFN 9x9 mm package with exposed pad offers compact surface-mount mounting with good thermal and ground performance. Architecturally, the dsPIC33EV core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, DMA, and multiple timers, enabling deterministic real-time control loops such as field-oriented motor control and digital power supplies without external signal-processing devices. Typical applications span appliance motor control, industrial drives, power supplies, and automotive subsystems, all environments where Microchip explicitly positions the 5V 70 MIPS dsPIC33EV family. Design consideration: at 70 MIPS the core executes at full speed from the 4.5V to 5.5V rail, so decouple the exposed pad ground return carefully and confirm thermal dissipation in the 9x9 mm footprint for heavily loaded I/O. This page synthesizes distributor listings, family cross-references, and drop-in alternative analysis not found on any single distributor page. Pricing shown reflects distributor data as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV128GM106T-I/PT

DSPIC33EV128GM106T-I/PT - 70MIPS 16-bit DSC 128KB | Microchip

The Microchip Technology DSPIC33EV128GM106T-I/PT is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33EV core, with 128KB of ECC Flash program memory (43K x 24) and 8KB of RAM, housed in a 64-pin TQFP (10x10 mm) package. A digital signal controller combines a microcontroller's peripherals and ease of use with a DSP engine's math throughput in a single chip. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and standalone DSPs, making it the natural choice for motor control, digital power conversion, and sensing applications where both control-loop speed and real-time math are required. The dsPIC33EV family extends this concept to harsh 5V industrial and automotive environments where 3.3V devices struggle with noise margins. Key features include a 5V-tolerant supply range of 4.5V to 5.5V, ECC-protected Flash for functional-safety (FuSa) designs, a 36-channel 10/12-bit ADC for multi-channel sensing, four DMA channels, nine timers, and Peripheral Pin Select (PPS) that remaps most digital peripherals to any of 53 general-purpose I/O pins. Architecturally, the device pairs a 16-bit modified Harvard CPU with a DSP instruction set (40-bit wide accumulators, single-cycle MAC) and 24-bit instruction words. On-chip Flash ECC, brown-out reset, watchdog timer, and a wide -40C to +85C industrial temperature grade support robust operation in electrically noisy environments. Typical applications include BLDC and PMSM motor control, switch-mode power supplies and digital power factor correction, automotive body and convenience modules, and industrial appliances. The 70 MIPS core executes current loops at switching frequency, while the 5V I/O drives noisy industrial signal rails directly. Design consideration: provide adequate decoupling (multiple 0.1uF ceramics plus bulk capacitance) on AVDD/AVSS and VDD/VSS pairs, and keep the analog ground plane separate under the ADC pins. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

Subkategori

Produk (39.000+)

DSPIC33EV128GM006-E/PT - 16-Bit 5V DSC 60MIPS 64-TQFP | Microchip

DSPIC33EV128GM006-I/MR - 16-bit 70 MIPS 5V DSC 64-VQFN | Microchip

DSPIC33EV128GM006-I/PT - 16-bit 70 MIPS 5V DSC, 128KB Flash | Microchip

DSPIC33EV128GM006T-I/MR - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV128GM006T-I/PT - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV128GM102-E/MM - 16-Bit 5V DSC, 128KB Flash | Microchip

DSPIC33EV128GM102-E/SO - 16-bit 60 MIPS DSC, 128KB Flash | Microchip

DSPIC33EV128GM102-I/MM - 70MIPS 5V DSC, 128KB Flash | Microchip

DSPIC33EV128GM102-I/SP - 16-Bit 70MIPS 5V DSC | Microchip

DSPIC33EV128GM102T-I/MM - 16-Bit 70MIPS 5V DSC | Microchip

DSPIC33EV128GM103T-I/M5 - 16-bit 5V DSC 128KB Flash | Microchip

DSPIC33EV128GM104-E/ML - 16-Bit 5V DSC 128KB Flash CAN | Microchip

DSPIC33EV128GM104-E/P8 - 16-bit 5V DSC 128KB Flash 48-TQFP | Microchip

DSPIC33EV128GM104-E/PT - 16-Bit 5V DSC, 128KB Flash, 44-TQFP | Microchip

DSPIC33EV128GM104-I/ML - 16-Bit 70 MIPS 5V DSC | Microchip

DSPIC33EV128GM104-I/P8 - 16-bit 70MIPS 128KB Flash DSC | Microchip

DSPIC33EV128GM104-I/PT - 5V 70MIPS 128KB DSC | Microchip

DSPIC33EV128GM104T-I/ML - 16-bit 70MIPS 5V DSC | Microchip

DSPIC33EV128GM104T-I/PT - 5V 70 MIPS 128KB DSC | Microchip

DSPIC33EV128GM106-E/PT - 16-bit 60 MIPS 128KB DSC | Microchip

DSPIC33EV128GM106-I/MR - 16-bit 5V 70 MIPS DSC 128KB Flash | Microchip

DSPIC33EV128GM106-I/PT - 70 MIPS 5V 128KB ECC Flash DSC | Microchip

DSPIC33EV128GM106T-I/MR - 16-bit 70 MIPS 5V DSC 128KB Flash | Microchip

DSPIC33EV128GM106T-I/PT - 70MIPS 16-bit DSC 128KB | Microchip