Sirkuit Terpadu

DSPIC33EV256GM102-I/MM

DSPIC33EV256GM102-I/MM - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-I/MM is a 16-bit, 5V digital signal controller (DSC) delivering up to 70 MIPS from an enhanced dsPIC33EV core, with 256 KB of ECC Flash (85.5K x 24 instruction words), 16 KB of RAM, and a CAN 2.0B controller, housed in a 28-pin QFN-S (6x6 mm) surface-mount package with an industrial -40C to +125C temperature rating. A digital signal controller combines the computational power of a DSP with the peripheral set and ease of use of a microcontroller. In the embedded-systems hierarchy, the DSC sits between general-purpose MCUs and dedicated DSPs: it executes control loops and math-intensive algorithms (PID, Clarke/Park transforms) while integrating motor-control PWM, communication buses, and analog peripherals on a single die, making it a compact single-chip solution for real-time control. Key features include a 5V-tolerant operating range (4.5V to 5.5V) that lets the chip drive MOSFET gates and interface with 5V industrial sensors without level shifting, 256 KB of self-programming ECC Flash for functional-safety-oriented designs, four DMA channels that offload data movement from the CPU, and seven timers. On-chip peripherals include a CAN 2.0B module for automotive and industrial networks, multiple UART, SPI, and I2C ports, a 10/12-bit ADC, and motor-control PWM outputs with complementary modes and dead-time insertion. Architecturally, the dsPIC33EV core couples a 16-bit modified Harvard pipeline with DSP engine features: a 17-bit x 17-bit single-cycle hardware multiplier, 40-bit accumulator, barrel shifter, and dual operand fetch for efficient MAC loops. Dual PGECx/PGEDx pin pairs support In-Circuit Serial Programming (ICSP) and in-circuit debugging with standard Microchip tools such as ICD/PICkit-class programmers. Typical applications include BLDC/ACIM/PMSM motor control for appliances and industrial drives, automotive body and auxiliary modules requiring CAN connectivity, switched-mode power supplies, and sensor-heavy systems exposed to harsh 24V industrial environments where 5V noise immunity matters. Design tip: budget the VDD/VSS pair on pin 11/8 and the internal regulator capacitor pin per the datasheet layout guidance, and connect all PGECx/PGEDx pairs as matched pairs when wiring the programming header. This page synthesizes verified distributor data, drop-in same-package alternatives, and practical design notes not found on the manufacturer product page. Pricing shown is an estimate as of 2026-09-26; confirm current stock and price with your distributor before ordering.

Permintaan RFG Kontak

DSPIC33EV256GM102-I/SP

DSPIC33EV256GM102-I/SP - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-I/SP is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, delivering up to 70 MIPS DSP performance with 256 KB of ECC Flash program memory and 16 KB of RAM in a 28-pin SPDIP through-hole package rated for -40C to +85C operation. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the embedded hierarchy, the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs, offering a DSP engine (barrel shifter, multiply-accumulate, modulo and bit-reversed addressing) while retaining Microchip's familiar peripheral ecosystem. The dsPIC33EV256GM102 is the top-memory member of the 28-pin GM10x subfamily. Key features include the 5V-tolerant dsPIC DSC core operating at up to 70 MIPS, 256 KB of Error-Correcting Code (ECC) Flash for functional-safety-oriented designs, four DMA channels that move data without CPU intervention, and seven timers. On-chip analog and mixed-signal peripherals include op amps, high-resolution PWM, and SENT support, targeting motor control and sensing nodes directly. The architecture pairs the DSP engine with flexible Peripheral Pin Select (PPS), letting engineers remap digital peripherals to available RPn pins - a significant advantage in 28-pin layouts where board routing is constrained. Integrated CAN makes the part directly suitable for in-vehicle and industrial fieldbus nodes. Typical applications span appliance motor control (BLDC/PMSM drives), automotive body and powertrain auxiliaries, industrial sensing with SENT-output sensors, power supplies and digital power conversion, and CAN-networked embedded nodes in harsh 5V environments. When designing with this device, budget for the DSP core supply requirements and use the ECC Flash status flags in your safety monitor loop; the 5V tolerance simplifies interfacing with legacy 5V sensors, eliminating level shifters. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet. Pricing shown is as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV256GM102-I/SS

DSPIC33EV256GM102-I/SS - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM102-I/SS is a 16-bit, 5V digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33EV core, with 256 KB (85.5K x 24) of Flash program memory and 16 KB of SRAM, housed in a 28-pin SSOP surface-mount package rated from -40C to +85C. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits above a basic MCU by adding DSP-class multiply-accumulate instructions, a barrel shifter, and DMA, while remaining a single-chip solution. Microchip positions the dsPIC33EV family specifically for 5V, high-noise environments where 3.3V controllers would require level shifting and additional protection. Key features include true 5V operation (4.5V to 5.5V supply range) for direct sensor interfacing and robustness in electrically noisy motor-drive cabinets, on-chip CAN 2.0B, LIN, and SENT communication peripherals for automotive and industrial networks, multiple high-resolution PWM channels for motor control and power conversion, and integrated analog including op amps and a 12-bit ADC. The device provides four DMA channels and seven timers for efficient data movement and timing. Architecturally, the dsPIC33EV core executes an optimized C compiler-friendly instruction set with DSP engine support at 70 MIPS, per the dsPIC33EVXXXGM00X/10X family data sheet (DS70005144H). Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals onto RPn pins, simplifying PCB routing. Flash self-programming supports field firmware updates, and low-power sleep and idle modes reduce standby consumption. Typical applications include Brushed/BLDC/PMSM motor control with sensorless algorithms, automotive sensing modules using SENT and LIN, battery chargers and digital power supplies exploiting the 5V PWM and analog front end, and appliance control boards where high noise immunity eliminates external level-shift circuitry. When designing with this device, budget the 5V rail carefully: at full 70 MIPS operation active current is significantly higher than sleep-mode current, so plan decoupling and power conversion accordingly, and use the MCLR pin with a proper pull-up for reliable in-circuit programming. This page synthesizes distributor pricing from DigiKey, Mouser, and LCSC, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single decision-ready reference.

Permintaan RFG Kontak

DSPIC33EV256GM102T-I/SO

DSPIC33EV256GM102T-I/SO - 16-bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM102T-I/SO is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC33E core, 256KB of ECC Flash and 16KB of RAM, housed in a 28-pin SOIC (SO) surface-mount package rated from -40C to +125C. A digital signal controller merges a microcontroller (MCU) with DSP-style math capability inside a single chip, sitting in the product hierarchy between general-purpose 16-bit MCUs and dedicated DSP processors. Within a typical embedded system, the DSC performs both real-time control loops and signal processing, making the family a power-management and control IC as well as a computation device. The dsPIC33EV subfamily is specifically engineered for harsh electrical environments, tolerating 5V operation with enhanced noise immunity. Key differentiating features include a 60 MHz (70 MIPS) core with DSP instruction extensions, single-cycle MAC and multiply operations, hardware error-correcting code (ECC) on the 256KB self-programming Flash for functional-safety designs, and six motor-control PWM channels. On-chip analog integration is unusually rich for this class: three operational amplifiers, a charge time measurement unit (CTMU), a 10-bit ADC, SENT peripheral support for automotive sensor interfaces, and a CAN 2.0B controller. Architecturally, the dsPIC33E core uses a modified Harvard pipeline with 16-bit wide instructions, two 40-bit accumulators, and hardware divide support, letting developers implement field-oriented motor control or digital power loops without external DSPs. The 5V tolerance simplifies direct interfacing with automotive sensors, industrial transducers, and power stages that still run legacy 5V rails. Typical applications include brushless DC and PMSM motor control in appliances, automotive body electronics and sensor nodes using SENT, industrial power supplies and solar micro-inverters, and battery-management systems. The PWM and op-amp integration reduces bill-of-materials cost in these designs. A key design consideration is the VCAP/VDDCORE pin: a low-ESR 10 uF capacitor must be placed close to this pin for core regulation stability, and the ECC Flash adds slight write-latency during erase cycles that affects in-field firmware update timing. This page synthesizes distributor pricing, drop-in alternatives, pinout guidance, and application-specific design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM103-I/M5

DSPIC33EV256GM103-I/M5 - 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV256GM103-I/M5 is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC33EV core, 256KB (85.5K x 24) ECC Flash and 16KB RAM, housed in a 36-pin UQFN (5x5 mm) package. A digital signal controller combines the computational power of a digital signal processor with the peripheral integration and control logic of a microcontroller. Within the embedded control hierarchy, the dsPIC33EV family sits alongside general-purpose MCUs but adds DSP multiply-accumulate hardware, making it a member of the broader class of mixed-signal embedded processors targeted at real-time control loops. Key features of this device include 5V operation for direct interfacing with industrial and automotive sensors, a 70 MIPS instruction throughput, ECC-protected Flash memory for functional-safety designs, and an integrated CAN 2.0B module for in-vehicle and industrial networking. The part is further equipped with 6 motor-control PWM channels, 3 on-chip operational amplifiers, a CTMU (Charge Time Measurement Unit) for touch/timing measurement, and SENT peripherals for automotive sensor interfaces. Technically, the dsPIC33EV core executes 16-bit instructions with DSP enhancements, and the device supports 4 DMA channels for efficient data movement without CPU intervention (per Microchip USA product data). The M5 package code denotes the 36-pin UQFN with exposed pad, which provides good thermal performance and low inductance for mixed-signal designs. Typical applications include motor control in appliances, CAN-based automotive body and powertrain nodes, industrial automation sensing, and power conversion systems, all environments where 5V noise immunity and DSP-grade math performance are required. A key design consideration is peripheral pin select (PPS): the RPn pins can be remapped to most digital peripherals, but PGECx/PGEDx pairs must be used as matched pairs for ICSP programming and debugging. This page synthesizes verified distributor data, drop-in alternatives within the dsPIC33EV family, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM103T-I/M5

DSPIC33EV256GM103T-I/M5 - 16-bit 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM103T-I/M5 is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance at 70 MHz with 256KB (85.5K x 24) of Flash program memory and 16KB (16K x 8) of RAM, housed in a 36-pin UQFN (5x5 mm) package with exposed pad. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripherals and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, offering multiply-accumulate DSP instructions for control loops such as motor control, digital power conversion, and sensor signal processing. Key features include a 5V-tolerant core operating from a 4.5V to 5.5V supply, which is a major advantage in harsh industrial and automotive environments where 3.3V devices require level shifting; 25 general-purpose I/O pins; Peripheral Pin Select (PPS) for flexible remapping of digital peripherals; and Functional Safety (FuSa) support per Microchip's product documentation. The dsPIC33EV core integrates DSP engine instructions, multiple DMA channels, and a seven-timer system, enabling tight control loops and efficient data movement without CPU overhead. The 256KB Flash supports self-programming for field updates, and the 16KB RAM accommodates control-loop state, communication buffers, and DSP working arrays. Typical applications include industrial motor control and drives, digital power supplies (PFC, LLC), automotive body and powertrain auxiliary modules, and appliance control boards where 5V noise immunity is valued. Design consideration: because this is a 5V device, verify that any connected 3.3V peripherals or sensors are 5V-tolerant, or add level shifters; the exposed pad of the UQFN-36 must be soldered to a grounded copper pour for thermal and signal-integrity performance. This page synthesizes distributor listings, drop-in alternatives from the same dsPIC33EV family, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM104-E/ML

DSPIC33EV256GM104-E/ML - 16-bit 60 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM104-E/ML is a 16-bit 5V digital signal controller (DSC) delivering 60 MIPS core performance with 256KB (85.5K x 24) ECC Flash and 16KB RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package rated from -40C to +125C. A digital signal controller combines the computational core of a microcontroller with the mathematical acceleration of a digital signal processor in a single chip. Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33EV sits between general-purpose MCUs and dedicated DSPs, offering deterministic control loops plus math-intensive signal processing. The dsPIC33EV family from Microchip targets harsh-environment 5V industrial, appliance, and automotive designs where 3.3V processors require level-shifting. Key features include an extended-temperature rating (-40C to +125C), 4.5V to 5.5V single-supply operation, an on-chip CAN 2.0B controller, six motor-control PWM channels, four integrated operational amplifiers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and time-domain measurements. Hardware ECC on the 256KB Flash program memory protects against bit errors, supporting functional-safety (FuSa) development as flagged on distributor listings. Architecturally, the dsPIC DSC core pairs a 16-bit modified Harvard pipeline with DSP engine features including a barrel shifter, high-throughput multiply-accumulate, and four DMA channels that move data between peripherals and RAM without CPU intervention. The SENT peripheral supports the SAE J2716 single-wire automotive sensor protocol, and dual UART/SPI/I2C communication resources round out connectivity. Typical applications include automotive sensor and control units, BLDC/PMSM motor control drives, industrial automation nodes on CAN networks, and appliance power-stage supervision. The 5V rail tolerance and extended temperature range eliminate external level translators in noisy 24V systems with 5V logic domains. For design, place 0.1uF decoupling on every VDD pin and keep the exposed thermal pad soldered to a ground pour for thermal and EMI performance. The 60 MIPS rating corresponds to a 60 MHz instruction clock from an external or internal oscillator source. This page synthesizes verified distributor specifications, drop-in family alternatives, and application guidance not consolidated in the manufacturer datasheet, with pricing as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV256GM104-E/P8

DSPIC33EV256GM104-E/P8 - 16-bit 5V DSC, 256KB Flash, CAN | Microchip

The Microchip Technology DSPIC33EV256GM104-E/P8 is a 16-bit 5V digital signal controller (DSC) with 256KB ECC Flash, 4KB RAM, and a 60 MHz core, housed in a 48-pin TQFP (7x7 mm) package with extended temperature operation (-40C to +125C). A digital signal controller combines the compute capability of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33EV family sits in the 16-bit MCU/DSC class, targeting real-time control loops where both math throughput and rugged I/O matter. The dsPIC33EV line is specifically built by Microchip for harsh environments such as appliances, industrial equipment, and automotive systems. Key features include 256KB of ECC-protected Flash (a major reliability benefit in high-vibration and high-noise environments), an on-chip CAN module for automotive and industrial networking, six motor-control PWM channels for inverter and motor drive designs, and three integrated operational amplifiers that reduce external component count in current-sense and analog front-end circuits. The CTMU (Charge Time Measurement Unit) supports capacitive touch and precise time measurement, while the SENT peripheral serves automotive sensor interfaces. Technically, the dsPIC33EV core executes DSP instructions with hardware multiply-accumulate, making it well suited for field-oriented control (FOC) of motors, digital power conversion, and sensor signal processing. The 5V-tolerant supply domain simplifies direct interfacing with automotive sensors and industrial logic without level shifting, a key differentiator versus 3.3V-only competitors. Typical applications include BLDC/PMSM motor control, on-board automotive chargers and DC-DC converters, industrial HVAC and appliance control boards, and SENT/CAN sensor nodes. Design consideration: take advantage of the three on-chip op amps for current shaping to cut BOM cost, but verify Flash ECC configuration and clock fail-safe settings early in development for safety-relevant designs. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM104-E/PT

DSPIC33EV256GM104-E/PT - 5V 70 MIPS DSC 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM104-E/PT is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS core performance from 256KB of ECC Flash program memory and 16KB of RAM, packaged in a 44-pin TQFP (10x10 mm) with an extended -40C to +125C operating temperature range. A digital signal controller combines the compute throughput of a DSP core with the peripheral set and ease of use of a microcontroller. Within the power management hierarchy of embedded systems, the dsPIC33EV family sits above basic 8-bit MCUs and below application processors, targeting real-time control loops where math-intensive algorithms (PI control, Park/Clarke transforms, digital filters) must execute deterministically at hard-real-time deadlines. Key features include the 5V-tolerant dsPIC DSC core rated at 70 MIPS, 256KB of self-programmable ECC Flash that detects and corrects single-bit memory errors for functional safety, dual CAN 2.0B modules for vehicle and industrial networking, motor-control PWM peripherals with dead-time insertion, on-chip operational amplifiers for current sensing, SENT and LIN interfaces for automotive sensor buses, and four DMA channels that offload data movement from the CPU. Architecturally, the dsPIC33EV core uses a modified Harvard pipeline with DSP multiply-accumulate (MAC) instructions and a 16x16 hardware multiplier, executing signal processing kernels in a single cycle. The ECC Flash array and 5V noise immunity make the device well suited to harsh electrical environments where 3.3V MCUs would require additional level shifting and EMI hardening. Typical applications include brushless DC and PMSM motor drives, automotive body and sensor control units, appliance power control (induction cooking, compressor drives), industrial power supplies with CAN connectivity, and battery management systems. The extended temperature variant (-E suffix, -40C to +125C) targets under-hood and high-temperature industrial locations. When designing with this device, plan for the internal 2.5V core regulator by placing the specified low-ESR capacitor on the VCAP/VDDCORE pin, and budget the 70 MIPS ceiling when combining motor-control PWM updates with CAN message processing under DMA. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EV family, practical design notes, and ordering-variant distinctions not found in the manufacturer datasheet, with pricing referenced as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV256GM104-I/P8

DSPIC33EV256GM104-I/P8 - 5V 70 MIPS DSC 256KB Flash 48-TQFP | Microchip

The Microchip Technology DSPIC33EV256GM104-I/P8 is a 16-bit, 5V digital signal controller (DSC) that integrates a 60 MHz dsPIC33E core with up to 70 MIPS throughput, 256 KB of ECC Flash program memory, 4 KB of RAM, two CAN 2.0B modules, six motor-control PWM channels, three on-chip op amps, a Charge Time Measurement Unit (CTMU), and a hardware SENT peripheral, all housed in a 48-pin TQFP package measuring 7x7 mm. A digital signal controller (DSC) combines the deterministic interrupt and peripheral integration of a microcontroller with the MAC engine and DSP throughput of a digital signal processor. In the embedded-processing hierarchy, a DSC sits above general-purpose 16-bit MCUs and below standalone DSPs, occupying a niche for closed-loop control loops that also require real-time signal processing. The dsPIC33EV family targets harsh 5V environments such as appliance, industrial, and automotive subsystems where 3.3V parts cannot be used directly. Key differentiating specifications include the 4.5V to 5.5V single-supply operation that eliminates external level shifters, ECC-protected Flash for functional-safety designs, dual CAN 2.0B interfaces for vehicle-bus and industrial-network nodes, and SENT (SAE J2716) hardware for modern automotive sensor interfacing. The integrated three op amps can be reconfigured as current-sense gain stages for BLDC and PMSM motor-control loops, reducing BOM and board area. The architecture pairs a Harvard-bus dsPIC33E CPU with single-cycle MAC, hardware saturating arithmetic, and a peripheral pin-select (PPS) mapper that allows most digital peripherals to be reassigned to multiple remappable pins, simplifying PCB routing. ECC on Flash plus a Flash error-correction interrupt supports ASIL-aware firmware strategies when paired with an external supervisor. Typical applications include automotive body-control modules, HVAC actuators, BLDC and PMSM motor drives for appliances and e-mobility, digitally controlled switch-mode power supplies, industrial sensor hubs with SENT or CAN connectivity, and any 5V embedded node that needs DSP-class filtering on noisy industrial buses. When designing in this part, verify ICSP pair usage (PGECx/PGEDx must be used as matched pairs) and place low-ESR 0.1 uF plus bulk ceramic decoupling near each VDD/VSS pair per the Microchip dsPIC33EV family datasheet recommendations. The internal PLL expects a stable primary oscillator before lock. This page synthesizes verified distributor pricing, drop-in same-package alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV256GM104-I/PT

DSPIC33EV256GM104-I/PT - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM104-I/PT is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, delivering up to 70 MIPS of DSP performance, 256 KB of ECC Flash program memory, and 32 KB of RAM in a 44-pin TQFP (10x10 mm) surface-mount package rated from -40C to +85C. A digital signal controller combines the computational power of a digital signal processor with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits above general-purpose MCUs for math-intensive real-time control: it executes multiply-accumulate and barrel-shift operations in hardware while integrating PWM generators, communication interfaces, and analog blocks on one die. The dsPIC33EV family extends this concept with 5V tolerance, making it well suited to electrically noisy environments. Key features include the 5V dsPIC DSC core rated at 70 MIPS, on-chip ECC Flash for functional-safety-oriented designs, up to six PWM outputs from three generators for motor control, SENT and CAN communication interfaces, and integrated op amps with advanced analog features. Peripheral Pin Select (PPS) allows flexible remapping of digital peripherals onto 35 available I/O pins. Architecturally, the device pairs a 16-bit CPU with a DSP engine (17-bit x 17-bit multiplier, barrel shifter, dual operand fetch) clocked from a 40 MHz external clock and internally multiplied via PLL to 70 MIPS instruction throughput. Four DMA channels offload peripheral data movement, and nine timers support complex time-base requirements. Low-power modes and a wide 3.0V to 5.5V operating range (per Kynix listing, 5.5V max) support battery-tolerant and industrial designs. Typical applications include brushless DC and PMSM motor control in appliances, automotive sensor and body-control units operating in harsh vibration and noise, and industrial power conversion where SENT and CAN buses and 5V noise immunity are decisive advantages. When designing with this DSC, budget the ECC Flash for safety-relevant code and remap peripherals through PPS early in schematic capture to avoid pin conflicts; verify RAM allocation carefully because third-party listings vary between 16 KB and 32 KB. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, giving engineers a single verifiable reference.

Permintaan RFG Kontak

DSPIC33EV256GM104T-I/P8

DSPIC33EV256GM104T-I/P8 - 16-bit 5V DSC 256KB Flash TQFP-48 | Microchip

The Microchip Technology DSPIC33EV256GM104T-I/P8 is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, combining a 70 MIPS 5V dsPIC33E core with 256KB (85.5K x 24) ECC Flash, 16KB RAM, and a 48-pin TQFP (7x7 mm) package rated from -40C to +85C. A digital signal controller merges the compute power of a DSP core with the peripheral set and deterministic interrupt behavior of a microcontroller, sitting between a general-purpose MCU and a dedicated DSP in the embedded control hierarchy. The dsPIC33EV family extends this concept to harsh 5V industrial and automotive environments where 3.3V controllers require additional level-shifting circuitry. Key features include on-die ECC Flash for functional-safety (FuSa) designs, a 24-channel 10/12-bit ADC, three on-chip operational amplifiers, a CTMU (charge time measurement unit) for capacitive touch and time measurement, a CAN 2.0B module, six motor-control PWM channels, and SENT peripheral support for automotive sensor interfaces. The modified Harvard architecture executes DSP instructions such as MAC and dual fetches while retaining fast interrupt latency for control loops. The 5V operation of 4.5V to 5.5V directly interfaces with legacy industrial buses and automotive 12V-derived sensor rails, and the DSP engine supports PID and field-oriented motor-control algorithms. Typical applications include BLDC and PMSM motor control in appliances, automotive body and sensor control units, industrial power supplies and digital power conversion, and battery-management nodes requiring CAN connectivity. Design consideration: budget the shared A/D and op-amp analog resources carefully - the three internal op amps are multiplexed with ADC channels, so pin planning must precede layout. This page synthesizes distributor listings, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM106-E/PT

DSPIC33EV256GM106-E/PT - 16-bit 5V DSC 256KB Flash 64-TQFP | Microchip

The Microchip Technology DSPIC33EV256GM106-E/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, featuring a 5V-rated dsPIC DSC core running up to 70 MIPS at 60 MHz, 256 KB of ECC Flash program memory, and 16 KB of RAM, housed in a 64-pin TQFP (10x10 mm, 0.5 mm pitch) package rated from -40C to +125C. A digital signal controller combines the computational power of a DSP with the peripheral integration and control-oriented architecture of a microcontroller, sitting in the system hierarchy between general-purpose MCUs (such as the PIC24) and dedicated DSP processors. The dsPIC33EV family extends this concept with 5V robustness, making it a single-chip solution for harsh electrical environments where 3.3V devices would require level shifting and additional protection circuitry. Key features include on-chip CAN 2.0B for industrial and automotive networking, six motor-control PWM channels for three-phase inverter drives, four integrated operational amplifiers that reduce external component count in current-sense circuits, SENT (SAE J2716) peripheral support for automotive sensor interfaces, and Error Correction Code (ECC) Flash for functional-safety-minded designs. The integrated op amps can be routed internally to the 36-channel 10-bit ADC, enabling compact motor-control and power-conversion feedback loops. Architecturally, the device provides a 16-bit modified Harvard core with DSP engine (17-bit x 17-bit single-cycle MAC, 40-bit accumulator, barrel shifter), multiple internal buses, 4 DMA channels, 9 timers, and a PLL-based clock system that can synthesize the 70 MIPS operating frequency from an internal or external oscillator. Operating voltage is 4.5V to 5.5V, simplifying design in 5V industrial buses and 12V automotive systems that use on-board regulation. Typical applications include BLDC/PMSM motor control for appliances and HVAC, automotive body and sensor modules, battery chargers, power inverters, and industrial automation nodes requiring CAN connectivity. The extended -40C to +125C temperature grade (E suffix) supports under-hood and near-motor locations. When designing with this DSC, budget current sense resistors and op amp gain stages carefully, and verify TQFP-64 land pattern per IPC-7351 before release. This page synthesizes distributor pricing, drop-in family alternatives, design notes, and FAQ content not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM106-I/MR

DSPIC33EV256GM106-I/MR - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV256GM106-I/MR is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS performance from its dsPIC33EV core, with 256 KB of ECC-protected Flash memory and 16 KB of RAM, housed in a 64-pin VQFN (9x9 mm, MR) package. A digital signal controller combines the compute architecture of a microcontroller with DSP-style math capability, sitting in the system hierarchy between a general-purpose MCU and a dedicated DSP processor. The dsPIC33EV family extends this concept to 5V operation, allowing direct connection to industrial sensors, automotive transducers, and motor-drive feedback circuits without level shifting. This makes the DSC category especially valuable in harsh environments where 3.3V processors require additional translation circuitry. Key features include 70 MIPS execution at 5V, 256 KB of ECC Flash for functional-safety-oriented designs, a CAN 2.0B controller for automotive and industrial networks, six motor-control PWM channels, four on-chip operational amplifiers, and a Charge Time Measurement Unit (CTMU) for capacitive touch and precise timing measurements. Up to 53 general-purpose I/O pins provide extensive peripheral connectivity. Architecturally, the dsPIC33EV core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, enabling single-cycle MAC operations for filter and control-loop math. The integrated op amps offload external analog signal conditioning in current-sense and sensor front-end paths, reducing BOM cost in motor inverters. Typical applications include BLDC and PMSM motor control, automotive body and sensor modules, appliance control boards, and industrial automation nodes where CAN, SENT, and robust 5V analog integration matter. The 5V Motor Control PIM (DS50002225) demonstrates this device in Microchip's DV330100 development platform. Design consideration: the ECC Flash adds protection against single-bit errors but consumes read-margin; plan Flash usage with the ECC overhead in mind and decouple all VDD pins during layout. This page synthesizes distributor availability data, pin-compatible family alternatives, and design guidance not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM106-I/PT

DSPIC33EV256GM106-I/PT - 16-bit 70 MIPS DSC, 256KB Flash | Microchip

The Microchip Technology DSPIC33EV256GM106-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS from a 5V-tolerant dsPIC DSC core, with 256KB (85.5K x 24) of ECC Flash program memory, 16KB of RAM, and a 64-pin TQFP (10x10 mm) package. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the semiconductor hierarchy, the dsPIC33EV sits under the DSC category, which itself belongs to the broader microcontroller and embedded processor family. DSCs are used where real-time mathematical processing such as PID loops, transforms, and filtering must run alongside general-purpose control tasks. Key features of this device include its robust 5V operation, which simplifies designs in electrically noisy environments where 3.3V MCUs require level shifting; integrated CAN, LIN, and SENT connectivity for automotive and industrial networks; hardware ECC Flash for functional-safety oriented designs; and advanced motor-control PWM peripherals with on-chip op amps for current sensing. Architecturally, the dsPIC33EV core uses a modified Harvard architecture with a barrel shifter, DSP engine, and multiple internal buses, sustaining single-cycle MAC operations. The Microchip USA listing further identifies 4 DMA channels and 9 timers, offloading data movement and timing tasks from the CPU. Clock operation reaches 40 MHz internal (70 MIPS equivalent via PLL-based operation per family specifications). Typical applications include automotive sensor and touch-control units, industrial motor control drives, appliance control boards, and CAN/LIN networked nodes - environments Microchip explicitly targets with the 5V dsPIC33EV family for noise and vibration robustness. A key design consideration: the -I suffix denotes an industrial temperature range of -40C to +85C; for extended -40C to +125C operation, the DSPIC33EV256GM106-E/PT variant should be selected instead. This page synthesizes distributor availability, drop-in same-package alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV256GM106T-I/MR

DSPIC33EV256GM106T-I/MR - 16-bit 70 MIPS 5V DSC 256KB | Microchip

The Microchip Technology DSPIC33EV256GM106T-I/MR is a 16-bit 5V digital signal controller (DSC) delivering 70 MIPS performance with 256KB (85.5K x 24) ECC Flash and 16KB RAM, housed in a 64-pin VQFN (9x9 mm) exposed-pad package rated from -40C to +85C. A digital signal controller combines the computational horsepower of a DSP core with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC such as the dsPIC33EV family sits between general-purpose MCUs and dedicated DSPs, providing deterministic control loops plus digital signal processing in a single chip. The dsPIC33EV is Microchip's 5V-tolerant DSC generation, purpose-built for harsh electrical environments. Key features include the 5V operating range that eliminates level shifting to automotive and industrial sensors, ECC (error-correcting code) Flash for functional-safety-oriented designs, up to 70 MIPS instruction throughput, and integrated analog and motor-control peripherals including PWM, SENT, and on-chip op amps. The device belongs to the Functional Safety (FuSa) supported dsPIC33EV line. Architecturally, the dsPIC DSC core uses a modified Harvard bus structure with multiple internal buses, enabling single-cycle MAC and DSP-class math while retaining deterministic interrupt latency for real-time control. Flash program memory is 256KB organized as 24-bit instruction words, with 16KB of SRAM data memory. Typical applications include automotive body and powertrain-adjacent modules, appliance motor control, industrial automation nodes, and electric power steering and pump controllers where 5V sensor interfaces and SENT connectivity are required. Design consideration: the 64-VQFN exposed pad must be soldered to a grounded copper pour for thermal and signal-integrity performance; also budget decoupling capacitors at every VDD pin pair per the manufacturer datasheet. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV32GM002-E/SS

DSPIC33EV32GM002-E/SS - 16-bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM002-E/SS is a 16-bit digital signal controller (DSC) from the 5V-robust dsPIC33EV family, featuring 32KB of Flash program memory, 4KB of RAM, and a dsPIC DSC core running at up to 60 MHz clock frequency (70 MIPS class performance at 5V), housed in a 28-pin SSOP package (5.30 mm width). The -E suffix denotes the extended temperature range of -40C to +125C, and the device is AEC-Q100 qualified for automotive applications. A digital signal controller combines the computational throughput of a microcontroller with DSP capabilities such as single-cycle multiply-accumulate and hardware division, sitting in the product hierarchy between general-purpose MCUs (like PIC16/PIC18) and dedicated DSP processors. DSCs are the preferred choice for closed-loop control systems such as motor control, digital power conversion, and sensor signal conditioning. Key differentiating features of this family include native 5V operation for improved noise immunity in harsh electrical environments, on-chip peripherals such as advanced PWM, SENT, LIN, and CAN communication interfaces, and integrated analog including high-speed ADC and op amps on larger family members. The Peripheral Pin Select (PPS) architecture allows flexible remapping of digital peripherals to physical pins, easing PCB layout and reducing board cost. Technically, the dsPIC33EV core executes most instructions in a single cycle with a 16-bit modified Harvard architecture, dual 40-bit accumulators, and DSP instruction support. Four DMA channels offload data movement from the CPU, and seven to nine timers support precise event timing. Flash self-programming enables field firmware updates, and the VCAP pin requires an external low-ESR capacitor for the internal 2.5V core regulator. Typical applications include automotive sensors and touch control units, BLDC/DC motor control with safety features, appliance power supplies, and industrial automation nodes exposed to electrical noise. The 5V rail simplifies direct interfacing with precision sensors without level shifting. Design consideration: keep the VCAP capacitor close to the device with a low-ESR ceramic value as specified in the family data sheet DS70005144H, and connect all VDD/VSS pairs and AVDD/AVSS properly to maintain ADC accuracy. This page synthesizes distributor pricing, same-family drop-in alternatives, FAQs, and practical design notes not found on a single manufacturer or distributor page.

Permintaan RFG Kontak

DSPIC33EV32GM002-I/SP

DSPIC33EV32GM002-I/SP - 16-bit 70 MIPS 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM002-I/SP is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering 70 MIPS performance at 5V with 32KB (11K x 24) of Flash program memory and 4KB of RAM, packaged in a 28-pin SPDIP (SP) through-hole package. A digital signal controller combines the compute architecture of a digital signal processor (DSP) with the peripheral integration and control-oriented ease of a microcontroller. In the power management IC hierarchy, the dsPIC33EV family sits in the 16-bit embedded MCU/DSC class and is engineered specifically for robust operation in harsh electrical environments, with a 5V-tolerant supply range of 4.5V to 5.5V that eliminates the level-shifting circuitry 3.3V controllers require when driving motors, relays and industrial sensors. Key features include the 16-bit dsPIC33EV core running at 70 MIPS, 4 DMA channels for peripheral-to-memory transfers without CPU intervention, multiple internal bus architectures, and low-power modes. DigiKey lists the device as a Functional Safety (FuSa) capable dsPIC33EV microcontroller, supporting safety-oriented development flows. The family datasheet highlights on-chip PWM, SENT and op-amp peripherals targeted at safety motor control. The dsPIC33EV32GM002 uses Microchip's enhanced Flash process with in-circuit serial programming (ICSP) via any PGECx/PGEDx pair, and is supported by the MPLAB X IDE and XC16 compiler toolchain. The 28-pin SPDIP package makes the device popular on breadboards, test rigs and legacy through-hole production lines. Typical applications include appliance motor control, industrial automation nodes, automotive sensors and control units, and 5V sensor-conditioning systems where the integrated op amps and SENT interface reduce external component count. Designers should budget the 4KB RAM carefully, as DSP filtering and communications buffering consume it quickly, and provide decoupling close to both VDD pins. This page synthesizes distributor availability, same-package alternatives, and practical design notes not consolidated in the manufacturer datasheet. Pricing shown is an estimate as of 2026-09-26 and must be confirmed with distributors.

Permintaan RFG Kontak

DSPIC33EV32GM002-I/SS

DSPIC33EV32GM002-I/SS - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV32GM002-I/SS is a 16-bit digital signal controller (DSC) with a 5V, 70 MIPS dsPIC DSC core, 32KB of Flash program memory and 4KB of RAM, housed in a 28-pin SSOP package with 0.65mm pin pitch. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable math features such as hardware multiply-accumulate, division assist, and barrel shifters. Within the power-management hierarchy, the dsPIC33EV family sits in the 16-bit DSC class, positioned between general-purpose MCUs and full DSPs, and is specifically engineered for 5V operation where robustness against electrical noise matters. Key features of this device include 5V operation across a 4.5V to 5.5V supply range, an operating temperature range of -40C to +85C (industrial, per the -I suffix), 4 DMA channels, 9 timers, and a rich peripheral set including advanced motor-control PWM, SENT, LIN, and CAN 2.0B communications, plus on-chip analog such as a 12-bit ADC and integrated op amps. Peripheral Pin Select (PPS) allows remapping of digital peripherals onto 21 GPIO pins, maximizing layout flexibility. The dsPIC33EV GM core executes most instructions in a single cycle at up to 70 MIPS, with DSP engine support for FIR/IIR filtering and FOC-type motor algorithms. Flash is rated for in-circuit self-programming, and the device supports ICSP/ICD debugging via any PGECx/PGEDx pin pair. The 5V I/O simplifies direct interfacing with sensors and gate drivers without level shifting. Typical applications include BLDC/PMSM and ACIM motor control in appliances, automotive body and sensing modules (AEC-Q100 qualified family), industrial automation nodes on CAN or LIN buses, and SENT-interface sensor processing in harsh, high-noise environments. For design, remember the internal regulator requires a low-ESR capacitor on the VCAP pin, and all VDD/VSS pairs must be decoupled close to the package. MCLR must be pulled up for reliable in-circuit programming. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV32GM003-E/M5

DSPIC33EV32GM003-E/M5 - 16-bit 5V DSC 32KB Flash 60MHz | Microchip

The Microchip Technology DSPIC33EV32GM003-E/M5 is a 16-bit digital signal controller (DSC) with a 5V-tolerant dsPIC33EV core running at 60 MHz (up to 70 MIPS family performance), 32KB of ECC Flash program memory, and 4KB of RAM, housed in a 36-pin UQFN package with exposed pad (M5 suffix). A digital signal controller combines the compute throughput of a DSP with the peripheral integration and control peripherals of a microcontroller. Within the power management hierarchy, the DSC sits between a general-purpose MCU and a standalone DSP, making it the natural choice for real-time control loops such as field-oriented motor control and digitally controlled power supplies. Key features include Error Correction Code (ECC) Flash for functional-safety-oriented designs, six motor-control PWM channels with dead-time insertion, three on-chip operational amplifiers that reduce external analog component count, a Charge Time Measurement Unit (CTMU) for capacitive touch and time-based measurement, and a SENT peripheral conforming to automotive sensor interfaces. The 5V operation provides superior noise immunity in harsh electrical environments compared to 3.3V controllers. Architecturally, the dsPIC33EV core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, multiple internal buses, 4 DMA channels, and 9 timers, enabling single-cycle MAC operations on 16-bit data. The extended temperature -40C to +125C rating (E suffix) and AEC-Q100 qualification target automotive and industrial deployment. Typical applications include safety-critical BLDC/PMSM motor control, automotive body and powertrain subsystems, appliance motor drives, and industrial power conversion. The onboard op amps interface directly with current shunts for closed-loop control without external amplifiers. Design consideration: the exposed pad is the primary thermal and ground path; connect it to a solid ground plane with multiple vias to meet thermal and EMC targets. This page synthesizes distributor pricing, drop-in family alternatives, and practical design guidance not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV32GM003-I/M5

DSPIC33EV32GM003-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV32GM003-I/M5 is a 16-bit dsPIC33EV digital signal controller (DSC) delivering up to 70 MIPS from its 5V-robust dsPIC DSC core, with 32KB (11K x 24) of ECC Flash program memory, 4KB of RAM, and a 36-pin UQFN (5x5 mm) package with exposed pad (EP). A digital signal controller combines the compute capability of a DSP (hardware MAC, DSP engine with single-cycle multiply-accumulate) with the peripheral integration and control architecture of a microcontroller. Within the power-management hierarchy, a DSC sits above general-purpose MCUs and below application-specific ASSPs, making it a common choice for real-time closed-loop control such as field-oriented motor control and digital power conversion. Key features of the DSPIC33EV32GM003 include a wide 1.8V to 5V operating environment with a 5V-tolerant design for harsh environments, 6 motor-control PWM channels with complementary outputs and fault protection, 3 on-chip analog op-amps, 4 DMA channels, 9 timers, and an extended-temperature variant family. The integrated op-amps reduce external component count in current-sense paths for motor drives and digital power supplies. The architecture runs at up to 60 MHz internal clock (70 MIPS instruction rate), with ECC Flash protecting program memory integrity for functional-safety-oriented designs; DigiKey lists the family under Functional Safety (FuSa) keywords. Deep sleep and low-power modes support battery-backed and standby operating points. Typical applications include appliance motor control (compressors, fans, pumps), automotive sensor and touch/control units operating in noisy environments, industrial drives, and digital power supplies where the 6 MC PWM channels and 3 op-amps form a compact control loop. Design consideration: at 5V operation the UQFN exposed pad must be soldered to a solid ground pour for both thermal dissipation and EMI performance; the 36-pin UQFN 0.5 mm pitch demands careful PCB land-pattern control per the Microchip layout guidance. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV32GM003T-I/M5

DSPIC33EV32GM003T-I/M5 - 16-Bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM003T-I/M5 is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS (60 MHz instruction clock) from 32KB of ECC-protected Flash and 4KB of RAM in a 36-pin UQFN (5x5 mm, M5) surface-mount package with exposed pad. A digital signal controller combines the peripheral set and control architecture of a microcontroller with the mathematical throughput of a DSP core in a single device. Within the power-management hierarchy, the dsPIC33EV sits in the microcontroller/DSC class of semiconductors and is specifically optimized for real-time control loops, where deterministic interrupt latency and fast multiply-accumulate operations drive motors, converters, and sensor systems. Key differentiating features include 6 motor-control PWM channels, 3 integrated operational amplifiers, a Charge Time Measurement Unit (CTMU), SENT peripheral support for automotive sensor interfaces, and 4 DMA channels alongside 7 timers. The 5V-tolerant operation distinguishes the dsPIC33EV family from most 3.3V competitors, simplifying interfacing with automotive sensors and industrial 5V logic while improving noise margins in harsh electrical environments. Architecturally, the dsPIC33E CPU implements an enhanced 16-bit modified Harvard pipeline with DSP multiply-accumulate, barrel shifter, and hardware division, enabling single-cycle MAC operation at 70 MIPS. ECC Flash protects program memory against bit errors, supporting the functional-safety (FuSa) positioning of the family. Peripherals such as the motor-control PWM with dead-time insertion directly support field-oriented motor control without external analog front-ends, because the on-chip op amps condition current-shunt signals. Typical applications include automotive body and powertrain subsystems (SENT sensors, relay drivers), appliance motor control (fans, pumps, compressors), and industrial power conversion where a 5V DSC with integrated analog reduces bill-of-material count. Design consideration: the 36-UQFN exposed-pad package requires a solid ground vias-in-pad PCB design; provide at least a 3x3 via array under the exposed pad to the ground plane for both thermal and electrical performance. This page synthesizes distributor pricing tiers, drop-in alternatives within the dsPIC33EV family, and practical design notes not found in the manufacturer datasheet. Pricing references are as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV32GM004-E/ML

DSPIC33EV32GM004-E/ML - 16-bit 5V DSC 32KB Flash | Microchip

The Microchip Technology DSPIC33EV32GM004-E/ML is a 16-bit 5V digital signal controller (DSC) with 32KB (11K x 24) ECC Flash, 4KB RAM, and a dsPIC33EV core delivering up to 60 MIPS, housed in a 44-pin QFN (8x8 mm) package rated for -40C to +125C operation. A digital signal controller combines the compute architecture of a microcontroller with DSP-capable instruction extensions such as multiply-accumulate (MAC) and barrel shifting. In the power-management hierarchy, a DSC sits above general-purpose MCUs and below dedicated DSPs, making it the preferred choice when real-time control loops (FOC, PID, sensor fusion) must run on the same chip that manages the application logic. Key features of the DSPIC33EV32GM004-E/ML include a wide 4.5V to 5.5V operating voltage that lets it interface directly with 5V industrial sensors and automotive logic without level shifters, 6 motor-control PWM channels, 3 on-chip operational amplifiers for current-shunt conditioning, a Charge Time Measurement Unit (CTMU) for touch sensing and time measurement, and a SENT peripheral for automotive sensor networks. The ECC Flash protects program memory against single-bit faults, supporting functional-safety-oriented designs. Technically, the dsPIC33EV core is a modified Harvard 16-bit architecture with DSP instruction extensions, 16 x 16 working registers, and deterministic interrupt latency. The 60 MHz internal clock delivers 60 MIPS peak performance. Peripherals include multiple UART, SPI and I2C ports, a 12-bit ADC, and comparators, reducing external BOM count in motor-drive and power-conversion nodes. Typical applications span brushless DC (BLDC) and PMSM motor control in appliances, electric power steering and pump control in automotive subsystems, digital power supplies, and harsh-environment industrial sensing where vibration, noise, and wide temperature swings rule out 3.3V-only MCUs. For design, budget the 44-QFN exposed pad as the primary ground and thermal path: connect it to a solid ground plane with an array of vias. The -E temperature grade (-40C to +125C) permits under-hood-adjacent placement, but verify junction temperature at maximum MIPS load. This page synthesizes distributor pricing, drop-in same-package alternatives, design notes, and application guidance not found in the manufacturer datasheet, verified as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV32GM004-E/P8

DSPIC33EV32GM004-E/P8 - 16-Bit 5V DSC 60MHz 48-TQFP | Microchip

The Microchip Technology DSPIC33EV32GM004-E/P8 is a 16-bit 5V digital signal controller (DSC) delivering 60 MHz performance with 32KB of ECC-protected Flash (11K x 24) and 4KB of RAM, housed in a 48-pin TQFP (7x7 mm) package rated from -40C to +125C for extended-temperature operation. A digital signal controller (DSC) combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSPs, making it the natural choice for closed-loop motor control and power conversion where fast multiply-accumulate operations and precise PWM generation must coexist. Key features of this device include 6 motor-control PWM channels (6 MC PWM), three integrated operational amplifiers (Op Amps) for current-sense signal conditioning, a Charge Time Measurement Unit (CTMU) for capacitive touch and precision time measurement, and a SENT peripheral for automotive sensor interfaces. The 5V operating range (4.5V to 5.5V) directly tolerates noisy 12V automotive and industrial rail environments after simple regulation, improving noise immunity compared to 3.3V-only controllers. Architecturally, the dsPIC33EV family uses the 16-bit dsPIC DSC core with DSP instruction support, single-cycle MAC, and hardware division. ECC Flash protects program memory against single-bit faults, supporting functional safety (FuSa) designs, and the family is AEC-Q100 qualified for automotive use. Peripheral set includes UART, SPI, I2C, QEI, and high-speed 12-bit ADC channels for current and voltage feedback loops. Typical applications include BLDC and PMSM motor drives for appliances, automotive pumps and fans, DC-DC converters, electronic power steering assist units, and industrial HVAC blowers. The three on-chip op amps reduce external component count in shunt-based current-feedback loops. Design consideration: enable the internal voltage regulator with a low-ESR capacitor on VCAP, and use the ECC Flash option plus watchdog timer when targeting safety-relevant motor control functions. This page synthesizes distributor pricing, drop-in family alternatives, pinout guidance, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

Subkategori

Produk (39.000+)

DSPIC33EV256GM102-I/MM - 16-bit 5V 70 MIPS DSC | Microchip

DSPIC33EV256GM102-I/SP - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM102-I/SS - 16-Bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM102T-I/SO - 16-bit 70 MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM103-I/M5 - 5V 70 MIPS DSC | Microchip

DSPIC33EV256GM103T-I/M5 - 16-bit 70 MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM104-E/ML - 16-bit 60 MIPS 5V DSC | Microchip

DSPIC33EV256GM104-E/P8 - 16-bit 5V DSC, 256KB Flash, CAN | Microchip

DSPIC33EV256GM104-E/PT - 5V 70 MIPS DSC 256KB Flash | Microchip

DSPIC33EV256GM104-I/P8 - 5V 70 MIPS DSC 256KB Flash 48-TQFP | Microchip

DSPIC33EV256GM104-I/PT - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM104T-I/P8 - 16-bit 5V DSC 256KB Flash TQFP-48 | Microchip

DSPIC33EV256GM106-E/PT - 16-bit 5V DSC 256KB Flash 64-TQFP | Microchip

DSPIC33EV256GM106-I/MR - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV256GM106-I/PT - 16-bit 70 MIPS DSC, 256KB Flash | Microchip

DSPIC33EV256GM106T-I/MR - 16-bit 70 MIPS 5V DSC 256KB | Microchip

DSPIC33EV32GM002-E/SS - 16-bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM002-I/SP - 16-bit 70 MIPS 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM002-I/SS - 16-bit 5V 70 MIPS DSC | Microchip

DSPIC33EV32GM003-E/M5 - 16-bit 5V DSC 32KB Flash 60MHz | Microchip

DSPIC33EV32GM003-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV32GM003T-I/M5 - 16-Bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM004-E/ML - 16-bit 5V DSC 32KB Flash | Microchip

DSPIC33EV32GM004-E/P8 - 16-Bit 5V DSC 60MHz 48-TQFP | Microchip