Sirkuit Terpadu

DSPIC33EV64GM102-I/MM

DSPIC33EV64GM102-I/MM - 16-Bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM102-I/MM is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance, 64KB of ECC Flash program memory (22K x 24), and 8KB of RAM, housed in a 28-pin QFN-S (6x6 mm) surface-mount package. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded systems, a DSC sits between general-purpose MCUs and dedicated DSP chips: it executes digital control loops, power-conversion algorithms, and motor-control mathematics while simultaneously managing communication, sensing, and supervisory tasks on a single chip. The dsPIC33EV family is Microchip's 5V-tolerant entry in this category, designed for harsh electrical environments. Key features of the DSPIC33EV64GM102 include error-correcting code (ECC) on Flash for functional-safety designs, a 16-bit DSP core with barrel shifter, on-chip operational amplifiers, high-resolution PWM modules, and a SENT peripheral compliant with automotive sensor networking. The 5V operating range eliminates level shifting when interfacing with automotive sensors and industrial 5V logic, improving noise immunity in electrically noisy environments. Architecturally, the device belongs to the dsPIC33EV family (part of the dsPIC33 line within Microchip's 16-bit portfolio). The core executes DSP instructions such as multiply-accumulate (MAC) at 70 MIPS, supporting field-oriented control (FOC) of motors, power-factor correction, and digital power conversion. On-chip features include multiple UART, SPI, and I2C ports, a 12-bit ADC pipeline for current and voltage sampling, and comparators for fast over-current protection. Typical applications include brushless DC and PMSM motor control in appliances, automotive body and powertrain subsystems using SENT, switched-mode power supplies, and industrial automation nodes where 5V noise immunity matters. A key design consideration is the VCAP pin: a low-ESR capacitor must be connected to stabilize the internal 2.5V core regulator, and proper decoupling on every VDD/VSS pair is essential for EMC compliance in automotive designs. This page synthesizes distributor availability, drop-in same-package alternatives, pinout data, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV64GM102-I/SO

DSPIC33EV64GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM102-I/SO is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS from its dsPIC33E core, with 64KB (22K x 24) of ECC Flash program memory and 8KB of RAM, packaged in a 28-pin wide SOIC for industrial temperature operation (-40C to +85C). A digital signal controller combines the peripheral set and ease of use of a microcontroller with the computational throughput of a DSP. Within the power-management hierarchy of embedded control, a DSC sits between general-purpose MCUs and dedicated DSPs, offering hardware multiply-accumulate, barrel shifting, and DSP instruction support while retaining Flash self-programming, interrupts, and rich serial peripherals. The dsPIC33EV family from Microchip extends this concept to a native 5V operating range, simplifying designs that must interface directly with automotive sensors and industrial 5V logic. Key features of the DSPIC33EV64GM102 include 70 MIPS execution at 5V, error-correcting code (ECC) Flash for functional-safety (FuSa) oriented designs, a hardware barrel shifter and DSP engine for control-loop mathematics, and low-power management modes for power-sensitive systems. The wide 5V supply tolerance makes it tolerant of harsh electrical environments such as load dump conditions in vehicles and noisy industrial power rails. Architecturally, the device uses an enhanced 16-bit modified Harvard core with multiple internal bus architectures for efficient data handling, single-cycle MAC, and hardware divide support. The ECC Flash continuously detects and corrects single-bit memory errors, an important feature for IEC functional-safety development paths. Typical applications include appliance motor control (BLDC/PMSM and ACIM), industrial power supplies and digital power conversion, automotive body and convenience modules, battery charging, and sensor signal conditioning where direct 5V interfacing removes level-shifting circuitry. A key design consideration: at 70 MIPS the core frequency is up to 70 MHz (via internal PLL from an external source), so decouple VDD/VDDCORE per the family datasheet and verify Flash wait-state settings for your supply voltage. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV64GM102T-I/SO

DSPIC33EV64GM102T-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM102T-I/SO is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS performance from a 5V core, with 64KB of ECC Flash program memory and 8KB of RAM, housed in a 28-pin SOIC (WSOIC-28) surface-mount package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control logic of a microcontroller (MCU). Within the power management hierarchy of embedded systems, a DSC such as the dsPIC33EV sits between general-purpose MCUs and full DSPs, making it a strong fit for closed-loop control tasks such as motor control, digital power conversion, and sensor fusion. Key features include the 5V tolerant dsPIC33E core running at 70 MIPS, ECC-protected Flash for functional-safety-critical code storage, an on-chip CAN 2.0B controller for automotive and industrial networks, six motor-control PWM channels, three integrated op amps, a CTMU (Charge Time Measurement Unit) for touch or time-domain measurement, and SENT peripheral support per the SAE J2716 sensor interface standard. Architecturally, the device uses a modified Harvard 16-bit pipeline with DSP engine features including a barrel shifter, 40-bit accumulator, and multiple internal buses, plus four DMA channels that offload data movement from the CPU. Microchip positions the dsPIC33EV family specifically for harsh environments such as appliances, industrial equipment, and automotive applications, where 5V I/O immunity to noise is a decisive advantage over 3.3V MCUs. Typical applications include BLDC and PMSM motor control with field-oriented control (FOC), automotive body and powertrain subsystems communicating over CAN, digital power supplies, and sensor interfaces using SENT or CTMU-based measurement. For design, note that supply voltage is 4.5V to 5.5V; when dropping from a 24V industrial bus, budget for a wide-input buck regulator ahead of the MCU rail. This page synthesizes distributor pricing, drop-in alternatives within the dsPIC33EV family, and practical design notes not consolidated in the manufacturer datasheet. Pricing references are as of 2026-09-26.

Permintaan RFG Kontak

DSPIC33EV64GM103-I/M5

DSPIC33EV64GM103-I/M5 - 70MIPS 5V DSC, CAN | Microchip

The Microchip Technology DSPIC33EV64GM103-I/M5 is a 16-bit digital signal controller (DSC) with a 5V-tolerant dsPIC33E core running at 70 MIPS (60 MHz instruction cycle clock), 64 KB (22K x 24) of ECC Flash program memory, 8 KB of SRAM, an integrated CAN module, 6-channel motor-control PWM, 3 on-chip operational amplifiers, a CTMU charge-time measurement unit, and SENT peripheral support, housed in a 36-pin UQFN (5x5 mm) exposed-pad package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and ease of use of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the dsPIC33EV family sits between general-purpose 16-bit MCUs and full DSPs, targeting deterministic real-time control loops such as field-oriented motor control and switch-mode power conversion. Key features include native 5V operation (4.5V to 5.5V supply), which removes external level-shifting in harsh industrial and automotive electrical environments, single-cycle MAC and DSP instructions for fast control mathematics, ECC-protected Flash for functional safety (FuSa) designs, and Peripheral Pin Select (PPS) for flexible pin mapping. The dsPIC33E architecture implements a modified Harvard pipeline with 24-bit instruction words, hardware divide support, and a DMA controller that offloads CAN, ADC, and UART data movement from the CPU core. The three integrated op-amps can be cascaded with the internal 10/12-bit ADC to build current-sense amplification directly on-chip, reducing bill-of-material cost in motor drives. Typical applications include BLDC and PMSM motor control, CAN-based automotive body and powertrain nodes, sensor conditioning using CTMU, and SENT-interface automotive sensors. Design consideration: the -I (industrial) temperature suffix covers -40C to +85C; the -E suffix extends to +125C if higher ambient is required. This page synthesizes distributor pricing, verified drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV64GM103T-I/M5

DSPIC33EV64GM103T-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

The Microchip Technology DSPIC33EV64GM103T-I/M5 is a 16-bit dsPIC33EV digital signal controller (DSC) delivering up to 70 MIPS at 5V operation, with 64KB (22K x 24) of ECC-protected Flash program memory and 8KB of RAM, housed in a 36-pin UQFN (5x5 mm) exposed-pad package. A digital signal controller combines the computational throughput of a digital signal processor with the peripheral integration and deterministic control of a microcontroller. Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33E family a common choice for motor control, digital power conversion, and sensing applications that require multiply-accumulate performance together with hard real-time peripherals. Key differentiating features of this part include 5V-tolerant operation across a 4.5V to 5.5V supply range, which suits harsh industrial and automotive electrical environments, an on-chip CAN module for vehicle and factory networks, six motor-control PWM channels for inverter and motor drive topologies, and an integrated CTMU (Charge Time Measurement Unit) for capacitive touch and time-based sensing. The 64KB Flash includes ECC (error correction code) protection, supporting functional-safety (FuSa) oriented designs. On the analog side, the device integrates three operational amplifiers that can buffer current-shunt signals ahead of the ADC, reducing external component count in motor-control and power-supply feedback loops. The SENT peripheral supports the single-edge nibble transmission protocol widely used in automotive sensor interfaces. The 70 MIPS core executes the DSP-class instruction set with hardware MAC, enabling filtering and control-loop mathematics at fixed deterministic rates. Typical applications include BLDC and PMSM motor control in appliances, automotive body and powertrain ancillary modules, digital power supplies, industrial sensing nodes, and CAN-networked actuators. The 5V rail tolerance eliminates a level-shifting supply stage that 3.3V MCUs would otherwise require. A key design consideration is thermal management: the exposed pad of the UQFN-36 package must be soldered to a ground pour with adequate via stitching to dissipate heat at full 70 MIPS operation. Flash ECC and the 4.5V to 5.5V operating window should both be verified against the end application's functional-safety targets. This page synthesizes distributor inventory signals, drop-in family alternatives, and practical design notes that are not consolidated in the manufacturer datasheet. Pricing is not published in the verified data as of 2026-09-26; request a quote for current volume pricing.

Permintaan RFG Kontak

DSPIC33EV64GM104-E/ML

DSPIC33EV64GM104-E/ML - 16-bit 60 MIPS 5V DSC, CAN | Microchip

The Microchip Technology DSPIC33EV64GM104-E/ML is a 16-bit 5V digital signal controller (DSC) from the dsPIC33EV family, delivering up to 60 MIPS performance with 64KB (22K x 24) ECC Flash and 8KB of RAM, housed in a 44-pin QFN (8x8 mm) package rated for -40C to +125C operation. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. DSCs sit within the broader microcontroller hierarchy of embedded processors and are optimized for real-time control loops where multiply-accumulate (MAC) operations, fast interrupts, and deterministic response are required, such as motor control and power conversion. Key features include a 5V-tolerant operating supply of 4.5V to 5.5V, which simplifies designs in harsh industrial and automotive environments where 3.3V parts need level shifting; a CAN 2.0B controller for robust in-vehicle and industrial networking; six motor-control PWM channels; and three on-chip operational amplifiers that reduce external component count in current-sense signal chains. A Charge Time Measurement Unit (CTMU) supports capacitive touch and precision time measurement, while the SENT peripheral targets automotive sensor interfaces. ECC Flash protects program memory integrity, supporting functional safety (FuSa) objectives. Architecturally, the dsPIC33EV core pairs a 16-bit pipeline with DSP instructions, a barrel shifter, and multiple internal bus structures, enabling efficient FIR filtering, PID control, and coordinate transformation (Clarke/Park) algorithms in sensorless motor drives. The -E temperature grade and 5V robustness make the part well suited to electrically noisy settings. Typical applications include BLDC/PMSM motor drives, automotive body and powertrain auxiliaries, industrial power supplies, appliances, and CAN-networked sensor nodes. Design consideration: the 44-QFN exposed-pad package requires a solid ground pour and via array under the pad for thermal and electrical performance; keep decoupling capacitors within 2 mm of VDD pins. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV64GM104-I/ML

DSPIC33EV64GM104-I/ML - 5V 70 MIPS 16-bit DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EV64GM104-I/ML is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance with 64 KB of ECC Flash program memory and 8 KB of RAM, housed in a 44-pin QFN (8x8 mm) package with exposed pad. A digital signal controller combines the computational capability of a microcontroller with DSP-oriented features such as hardware multiply-accumulate, making the dsPIC33EV family a bridge between general-purpose MCUs and dedicated DSPs. Within the power-management hierarchy of embedded control, a DSC sits above basic MCUs and is optimized for closed-loop control loops, digital power conversion, and motor control in electrically harsh environments. Key features include a 5V-tolerant operating supply that eliminates level-shifting in industrial and automotive 5V systems, up to 24 channels of 10-bit ADC, four DMA channels, CAN 2.0B and SENT interfaces for automotive networking, and on-chip op amps plus high-resolution PWM outputs targeted at motor control. The integrated ECC Flash provides single-bit error correction for improved functional safety in noisy environments. Architecturally, the dsPIC33EV core runs a modified Harvard pipeline at up to 70 MIPS, with DSP instruction extensions (MAC, modulo addressing, bit-reversed addressing) that accelerate digital filtering and control algorithms. The wide 3.0V to 5.5V supply range and industrial-grade design target harsh conditions with noise and vibration. Typical applications include BLDC and PMSM motor control, automotive sensors and touch/control units, appliance control boards, industrial power supplies, and CAN-networked body modules. When designing with this device, plan the VDD decoupling with low-ESR ceramics and account for the exposed thermal pad on the QFN bottom when creating the PCB land pattern. This page synthesizes distributor pricing, drop-in same-family alternatives, comparison tables, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33EV64GM104T-I/ML

DSPIC33EV64GM104T-I/ML - 16-bit 5V 70 MIPS DSC | Microchip

The Microchip Technology DSPIC33EV64GM104T-I/ML is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance, 64KB of ECC Flash memory (22K x 24) and 8KB of RAM, housed in a 44-pin QFN (8x8 mm) exposed-pad package. A digital signal controller combines the computational strengths of a microcontroller (MCU) with the math capability of a digital signal processor (DSP). Within the power-management hierarchy, a DSC such as this sits above a basic MCU: it executes deterministic control loops (PLL, motor control, power conversion) while providing general-purpose peripherals like CAN, UART and SPI. The dsPIC33EV family belongs to Microchip's 16-bit dsPIC33E architecture and is specifically designed for harsh-environment operation. Key features include a 5V-tolerant operating range of 4.5V to 5.5V, which removes the need for a separate 3.3V rail in industrial and automotive 12V/24V systems; up to six PWM outputs for motor control; SENT protocol support for automotive sensor interfaces; and on-chip operational amplifiers that reduce external analog component count. The 64KB ECC Flash provides single-bit error correction for functional-safety oriented designs, and the device is listed by Microchip as Functional Safety (FuSa) capable. Architecturally, the dsPIC33EV core is a modified Harvard 16-bit CMOS engine with DSP multiply-accumulate instructions, four DMA channels and seven timers, enabling deterministic real-time execution. Speed derating applies with temperature: DC to 70 MIPS at 0C to +85C, 60 MIPS at -40C to +125C, and 40 MIPS at up to +150C for the E-grade variants. The -I grade used here covers -40C to +125C. Typical applications include automotive touch and control units, industrial motor drives and inverters, and appliance control boards where 5V noise immunity and CAN connectivity are required. Design tip: at 70 MIPS the core runs from an internal PLL fed by a 7.37 MHz FRC oscillator, so verify flash wait-state and ECC settings in the configuration words when migrating speed grades. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV64GM104T-I/PT

DSPIC33EV64GM104T-I/PT - 16-bit 70 MIPS 5V DSC 64KB | Microchip

The Microchip Technology DSPIC33EV64GM104T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS performance from a 5V-tolerant dsPIC33 core, with 64KB (22K x 24) ECC Flash program memory, 8KB RAM, and a 44-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and deterministic control of a microcontroller (MCU). Within the power-management hierarchy of embedded systems, the DSC sits between a general-purpose MCU and a dedicated DSP, making the dsPIC33EV family well suited to closed-loop control loops, motor control, and power conversion where both math throughput and rugged I/O are required. Key features of this part include an operating voltage range of 4.5V to 5.5V (5V-class operation in harsh environments), a CAN 2.0B bus interface with up to 8 Mbit/s operation, six motor-control PWM channels with fault protection, three on-chip op amps, a charge time measurement unit (CTMU), and SENT peripheral support for automotive sensor interfaces. The ECC Flash provides functional safety (FuSa) capability by detecting and correcting single-bit memory errors. Architecturally, the dsPIC33EV64GM104 integrates a 16-bit modified Harvard core with DSP engine, barrel shifter, four DMA channels, and multiple interrupt vectors, allowing deterministic real-time response. Peripheral Pin Select (PPS) lets engineers remap digital peripherals onto RPn pins, easing PCB layout and reducing board rework during development. Typical applications include brushless DC and PMSM motor drives, industrial power supplies, automotive body and powertrain subsystems using CAN and SENT, appliances requiring robust 5V I/O, and digital lighting or HVAC control. A key design consideration is thermal management: the 44-TQFP exposed-lead package on a standard 4-layer board typically supports the full industrial temperature range of -40C to +85C, but high-frequency operation with heavily loaded I/O banks should be verified with junction temperature estimation. This page synthesizes distributor availability data, drop-in alternatives, pin-compatibility guidance, and practical design notes not found in a single manufacturer datasheet, giving engineers and buyers one consolidated reference.

Permintaan RFG Kontak

DSPIC33EV64GM106-E/MR

DSPIC33EV64GM106-E/MR - 16-Bit 60MIPS 5V DSC 64KB | Microchip

The Microchip Technology DSPIC33EV64GM106-E/MR is a 16-bit 5V digital signal controller (DSC) delivering up to 60 MIPS (70 MIPS core capability per family) from 64KB (22K x 24) ECC Flash and 8KB RAM, housed in a 64-pin VQFN (9x9 mm) package with exposed pad and an extended temperature range of -40C to +125C. A digital signal controller combines the computational architecture of a digital signal processor with the peripheral set and ease of use of a microcontroller. Within the power-management hierarchy of embedded control, the DSC sits between a general-purpose MCU and a dedicated DSP, making it a single-chip solution for real-time control loops such as field-oriented motor control, digital power conversion, and sensor signal processing. Key features of the dsPIC33EV64GM106 include 5V-tolerant operation that removes the need for level shifting in noisy 12V/24V industrial and automotive environments, ECC (error-correcting code) Flash for functional-safety-critical designs, and a rich peripheral set including multiple PWM modules, high-speed 12-bit ADCs, comparators, UART/SPI/I2C communication ports, and DMA channels. The -E/ extended temperature suffix plus AEC-Q100 qualification targets automotive and harsh-environment applications. Architecturally, the dsPIC33E core uses a modified Harvard pipeline with DSP multiply-accumulate instructions, dual operand fetch, and hardware division support, enabling deterministic single-cycle MAC execution for control algorithms. On-chip oscillators with PLL support clock-less boot without an external crystal, reducing BOM cost and failure points. Typical applications include brushless DC and PMSM motor drives, automotive body and sensor control units, appliance power control, industrial power supplies, and touch or noise-immune sensing front ends. The 5V I/O directly interfaces with automotive load-dump-tolerant subsystems. Design consideration: because this is a VQFN-64 with exposed pad, thermal and ground performance depend on a well-soldered center pad; plan the PCB land pattern and via array under the pad before layout freeze. This page adds value beyond the manufacturer datasheet by consolidating distributor pricing, same-package drop-in variants, application pairings, and practical layout guidance in one AI-citable reference.

Permintaan RFG Kontak

DSPIC33EV64GM106-I/MR

DSPIC33EV64GM106-I/MR - 16-bit 5V 70MIPS DSC 64KB Flash | Microchip

The Microchip Technology DSPIC33EV64GM106-I/MR is a 16-bit 5V digital signal controller (DSC) delivering up to 70 MIPS performance from the dsPIC33EV core, with 64KB (22K x 24) of ECC Flash program memory and 8KB of RAM, housed in a 64-pin VQFN (9x9 mm) surface-mount package. A digital signal controller combines the computational architecture of a digital signal processor (DSP) with the peripherals and ease of use of a microcontroller (MCU). In the power-management hierarchy, the dsPIC33EV family sits between general-purpose MCUs and dedicated motor-control ASICs, offering a programmable platform for real-time control loops in harsh electrical environments such as industrial drives, appliances, and automotive subsystems. Key features include the 5V-tolerant dsPIC DSC core operating at 70 MIPS, ECC (error-correcting code) Flash for functional-safety (FuSa) oriented designs, and an advanced analog and timing peripheral set. The family data sheet highlights PWM modules with advanced modes, SENT peripheral support for automotive sensor interfaces, and integrated operational amplifiers, reducing external component count in motor-control and power-conversion signal chains. Peripheral Pin Select (PPS) allows remapping of digital peripherals onto RPn/RPIn pins for flexible board routing. Architecturally, the dsPIC33EV core is optimized for deterministic real-time control, with DSP-class multiply-accumulate instructions for filtering and control algorithms. The 5V operating range is a defining differentiator, allowing direct interfacing with automotive and industrial 5V sensor rails without level shifting, and improving noise immunity in electrically harsh environments compared to 3.3V-only controllers. Typical applications include brushless DC (BLDC) and permanent-magnet synchronous motor (PMSM) control, switch-mode power supplies and power-factor-correction converters, and automotive body or sensor-interface nodes using the SENT protocol. The on-chip op amps pair naturally with current-sense shunts in inverter designs. A key design consideration: confirm the full 64-pin VQFN pin map against the dsPIC33EVXXXGM00X/10X family data sheet before layout, and reserve ICSP/ICD programming pins (PGECx/PGEDx) for debug access. This page synthesizes distributor data, drop-in family alternatives, pricing tiers, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33EV64GM106-I/PT

DSPIC33EV64GM106-I/PT - 64KB Flash 16-bit DSC, 64-TQFP | Microchip

The Microchip Technology DSPIC33EV64GM106-I/PT is a 16-bit Digital Signal Controller (DSC) from the dsPIC33EV family that combines a 5V 70 MIPS dsPIC DSC core with 64KB of ECC Flash and 8KB RAM, housed in a 64-pin TQFP (10x10 mm) package. It integrates a high-performance DSP engine with enhanced on-chip analog including operational amplifiers and 12-bit ADC, plus advanced PWM, SENT, and CAN peripherals that target harsh-environment motor control and automotive applications. A Digital Signal Controller (DSC) is a hybrid architecture that merges the deterministic interrupt response and peripheral set of a microcontroller with the multiply-accumulate (MAC) throughput of a DSP. Within the broader semiconductor taxonomy, the dsPIC33EV belongs to: DSC -> microcontroller -> embedded processor -> semiconductor IC. The 5V core voltage and extended peripherals (CAN, SENT, op amps) position this family between low-voltage ARM Cortex-M4 MCUs and traditional DSPs, enabling direct interfacing with 5V sensors and 12V automotive buses without level shifters. Key differentiating features include 70 MIPS execution from a 5V supply, dual 12-bit ADC modules with up to 32 input channels, three op amps configurable for signal conditioning, three analog comparators, three 16-bit timers, and a 4-channel DMA controller. Communication peripherals include 2x CAN, 2x I2C, 3x SPI, 4x UART, and SENT (Single Edge Nibble Transmission) support for automotive sensor interfacing. The architecture uses a modified Harvard design with separate program and data paths, single-cycle MAC and barrel shifting, and zero-overhead looping. ECC on Flash improves reliability in electrically noisy environments, and the wide operating temperature range (-40C to +85C for the I-grade variant) supports industrial and automotive deployments. Typical applications include BLDC/PMSM motor control (field-oriented control up to several kW), automotive sensor interfacing via SENT, switched-mode power supply digital control, LED lighting drivers, and industrial automation nodes requiring on-chip op amps for current sensing. When designing with this device, allocate careful PCB layout for the analog and power sections: keep the AVDD/VREF traces short, decouple the 5V supply with a 10uF bulk plus 0.1uF ceramic on every VDD/AVDD pair, and avoid routing PWM traces near the analog op-amp inputs. Always reserve two I/O for ICSP programming (PGEDx/PGECx). This page synthesizes distributor pricing, parameter comparison tables, and practical design notes that are not found in the manufacturer datasheet alone, helping engineers select and qualify the DSPIC33EV64GM106-I/PT with confidence.

Permintaan RFG Kontak

DSPIC33EV64GM106T-I/PT

DSPIC33EV64GM106T-I/PT - 16-bit 70 MIPS 64KB DSC | Microchip

The Microchip Technology DSPIC33EV64GM106T-I/PT is a 16-bit digital signal controller (DSC) from the dsPIC33EV family, delivering up to 70 MIPS performance, 64KB (22K x 24) of ECC Flash program memory, and 8KB of RAM, housed in a 64-pin TQFP (10x10 mm) surface-mount package. A digital signal controller combines the computational throughput of a digital signal processor (DSP) with the peripheral integration and control logic of a microcontroller (MCU). Within the embedded processing hierarchy, DSCs sit between general-purpose microcontrollers and dedicated DSPs, making them the preferred choice for closed-loop control systems such as motor drives, digital power supplies, and sensor fusion, where deterministic multiply-accumulate (MAC) execution and rich analog peripherals must coexist. Key features of this device include its 5V-tolerant operating range, which allows direct interfacing with industrial 5V logic without level shifters, ECC Flash for functional-safety (FuSa) oriented designs, and a peripheral pin select (PPS) scheme that lets designers remap digital peripherals onto available I/O pins for maximum board-layout flexibility. The industrial temperature rating (-40C to +85C) covers most appliance, industrial, and commercial automotive-adjacent applications. Technically, the dsPIC33EV64GM1 core executes the enhanced 16-bit dsPIC instruction set with DSP engine support for single-cycle MAC and hardware division, running from an internal PLL clocked from an external crystal. Peripherals typically configured on the GM106 variant include multiple UART, SPI, and I2C ports, PWM modules suited to motor control, DMA channels, and a high-speed 12-bit ADC, enabling complete single-chip control nodes. According to Microchip's product page, the dsPIC33EV family is specifically aimed at harsh environments such as appliances, industrial equipment, and automotive systems. Typical applications include BLDC and PMSM motor control, digital power conversion (PFC, LLC), automotive body and convenience modules, and industrial sensing and actuation nodes. The 5V supply simplifies designs driving gate drivers and industrial sensors directly. Design consideration: confirm the supply range of 4.5V to 5.5V against your power tree and use the ECC Flash option deliberately, as the T (tape-and-reel) suffix and I (industrial temperature) suffix define ordering, not electrical, differences. This page synthesizes distributor pricing, same-family drop-in alternatives, and practical design notes not found in the manufacturer datasheet, providing a single sourcing and engineering reference.

Permintaan RFG Kontak

DSPIC33FJ06GS001-E/P

DSPIC33FJ06GS001-E/P - 16-bit 40 MIPS DSC 18-PDIP | Microchip

The Microchip Technology DSPIC33FJ06GS001-E/P is a 16-bit Digital Signal Controller (DSC) from the dsPIC33FJ06GS family, delivering 40 MIPS performance with 6KB (2K x 24) of Flash program memory and 0.25KB of RAM, housed in an 18-pin PDIP package with an extended -40C to +125C temperature rating. A Digital Signal Controller combines the computational throughput of a digital signal processor with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy, DSCs such as the dsPIC33FJ06GS001 sit above general-purpose MCUs for real-time control of switching power supplies, where deterministic interrupt latency and dedicated PWM hardware are essential. Key features include a dedicated SMPS (Switched-Mode Power Supply) PWM module optimized for power conversion, two high-speed analog comparators, and a 10-bit ADC - a peripheral set purpose-built for digital power supplies. The 40 MIPS core executes DSP instructions (multiply-accumulate, barrel shifter) for control-loop mathematics, while code execution from Flash with instruction-level determinism simplifies closed-loop firmware design. The architecture pairs the dsPIC33F 16-bit CPU core with flexible Peripheral Pin Select (RPn remapping), allowing PWM outputs, UART, and other digital peripherals to be routed to selectable pins - critical for optimizing an 18-pin power-conversion layout. The -E/ temperature suffix qualifies the device for -40C to +125C operation, suitable for sealed power electronics and high-temperature enclosures. Typical applications include AC-DC and DC-DC converter control, interleaved power factor correction (Microchip's Interleaved PFC reference design targets this SMPS dsPIC family), battery chargers, LED drivers, and digital lighting ballasts. Design consideration: on this 18-pin device, INT0 is not remappable, and ICSP programming requires PGECx/PGEDx pins to be used strictly as matched pairs - plan your pinout before routing. This page synthesizes distributor listings, drop-in alternatives within the dsPIC33FJ06GS family, and practical design notes not found in the manufacturer datasheet summary.

Permintaan RFG Kontak

DSPIC33FJ06GS001-I/SO

DSPIC33FJ06GS001-I/SO - 16-bit DSC 40 MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS001-I/SO is a 16-bit digital signal controller (DSC) delivering 40 MIPS performance from 6KB (2K x 24) of Flash program memory and 256 bytes of RAM, housed in an 18-pin SOIC (0.3 inch) package for surface-mount assembly. A digital signal controller combines the computational power of a digital signal processor (DSP) with the peripheral integration and control logic of a microcontroller (MCU), positioning it above basic microcontrollers and below full DSPs in the embedded hierarchy. The dsPIC33F family is Microchip's 16-bit DSC line optimized for real-time digital power conversion, where deterministic loop closure at tens to hundreds of kilohertz is essential. Key features of the GS001 variant include high-resolution PWM peripherals purpose-built for switch-mode power supplies (SMPS), an analog-to-digital converter, analog comparators, and industrial temperature rating (-40C to +85C, denoted by the -I suffix). The device targets multi-loop digital power topologies directly, with hardware that offloads timing-critical PWM and ADC triggering from software. The SMPS-oriented peripheral set supports common and multi-loop digital power conversion: the high-speed PWM module provides complementary outputs, dead-time insertion, and fault protection, while on-chip comparators enable fast overcurrent shutdown without CPU intervention. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), and LED drivers, all cited on the Microchip product page for this family. Design consideration: with only 6KB of instruction Flash and 256 bytes of RAM, firmware must be lean; developers should budget code space carefully and use the GS202A or larger family members if control-law complexity grows. This page synthesizes distributor data, family drop-in alternatives, and design guidance not found on the standard manufacturer product page.

Permintaan RFG Kontak

DSPIC33FJ06GS001-I/SS

DSPIC33FJ06GS001-I/SS - 16-bit 40 MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS001-I/SS is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS performance with 6 KB (2K x 24) of FLASH program memory, 256 bytes of RAM, and dedicated switch-mode power supply (SMPS) peripherals, housed in a 20-pin SSOP (SS) package rated for -40C to +85C operation. A digital signal controller combines the computational capability of a digital signal processor with the control peripherals and ease of use of a microcontroller. Within the embedded control hierarchy, the DSC sits between general-purpose MCUs and full DSPs, making it the preferred choice for closed-loop, high-frequency control loops such as digital power conversion, where deterministic interrupt latency and specialized PWM hardware matter more than raw math throughput. Key features of this SMPS-focused device include a high-speed 16-bit PWM module with complementary outputs, dead-time control, and edge- or center-aligned modes; a high-speed 10-bit ADC capable of sampling multiple channels simultaneously for current- and voltage-loop feedback; and on-chip analog comparators that can trigger PWM fault states in nanoseconds without CPU intervention, enabling cycle-by-cycle current limiting. Technically, the device executes the dsPIC33F core with a 24-bit instruction word architecture, a barrel shifter, DSP multiply-accumulate instructions, and two address generation units. Its internal voltage regulator (VREG) allows single-supply operation from approximately 3.0V to 3.6V, and low-power modes plus doze/sleep support reduce standby consumption in offline power stages. Typical applications include AC-DC and DC-DC power supplies, power factor correction (PFC) stages, LED drivers, battery chargers, and digital lighting ballasts. Microchip's interleaved PFC reference design, producing up to 350 W from universal input, is based on this SMPS DSC family, demonstrating the fit for digital power. Design consideration: the 6 KB FLASH capacity requires tight code discipline; use fixed-point DSP library routines and avoid heavy middleware stacks, and verify the erase/program endurance budget if field firmware updates are planned. This page synthesizes distributor pricing from DigiKey, Mouser, LCSC and Octopart, drop-in family alternatives, pinout guidance, and practical digital-power design notes not found in the manufacturer datasheet, giving engineers a single citable selection resource.

Permintaan RFG Kontak

DSPIC33FJ06GS001T-I/SO

DSPIC33FJ06GS001T-I/SO - 16-bit 40 MIPS SMPS DSC | Microchip

The Microchip Technology DSPIC33FJ06GS001T-I/SO is a 16-bit dsPIC33F SMPS digital signal controller (DSC) delivering up to 40 MIPS performance with 6 KB (2K x 24) of FLASH program memory and 256 bytes of RAM, housed in an 18-pin SOIC package rated for -40C to +85C industrial operation. A digital signal controller combines the compute throughput of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33FJ GS family sits between general-purpose MCUs and dedicated digital power ICs: it runs the control loop of switching power supplies in firmware while providing purpose-built PWM, ADC, and analog-comparator peripherals for closed-loop regulation. Key features include a high-speed 16-bit dsPIC core at 40 MIPS, dedicated high-resolution PWM outputs tailored for switch-mode power-supply topologies, an on-chip ADC with fast conversion rates for current- and voltage-feedback sampling, and analog comparators that support cycle-by-cycle current limiting without CPU intervention. The 6 KB self-programming FLASH supports field firmware updates, while the 256-byte RAM holds control-loop state variables. Architecturally, the device pairs a DSP engine (17-bit x 17-bit multiplier, 40-bit accumulator) with C-friendly MCU addressing, allowing deterministic single-cycle MAC operations for Proportional-Integral compensation loops. The GS family data sheet (Microchip document DS75018, family dsPIC33FJ06GS001/101A/102A/202A) details the SMPS-focused peripheral set. Typical applications include AC-DC power supplies with power factor correction, DC-DC converters, LLC and flyback control, LED drivers, and digital battery chargers. Microchip offers an interleaved PFC reference design producing up to 350 W from universal input, demonstrating the family in production-grade digital power. When designing, verify that the 6 KB program memory and 256-byte RAM budget accommodate your compensator and state machine, and follow the datasheet decoupling and VDD/AVSS pin connection guidelines for analog noise performance. This page adds value beyond the datasheet by consolidating distributor availability, pricing tiers, drop-in alternatives, and practical design notes in one place.

Permintaan RFG Kontak

DSPIC33FJ06GS001T-I/SS

DSPIC33FJ06GS001T-I/SS - 16-bit DSC 40 MIPs 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS001T-I/SS is a 16-bit dsPIC33F digital signal controller (DSC) delivering up to 40 MIPS performance with 6 KB (2K x 24) of FLASH program memory, 256 bytes of RAM, and a 20-pin SSOP surface-mount package operating from a 3.3 V supply. A digital signal controller combines the deterministic control flow of a microcontroller (MCU) with the mathematical throughput of a digital signal processor (DSP). Within the power-management hierarchy, the dsPIC33F GS family sits at the intersection of general-purpose MCUs and dedicated digital power ICs, providing a single-chip solution for closed-loop switch-mode power supply (SMPS) control. Key features include high-speed PWM peripherals purpose-built for digital power conversion, a high-speed 10-bit ADC, on-chip comparators, and connectivity via I2C, SPI, UART/USART, IrDA, and LINbus. The 40 MIPS core executes DSP instructions such as multiply-accumulate, enabling fast loop compensation in firmware. Architecturally, the device pairs a 16-bit modified Harvard RISC core with a 24-bit instruction word, hardware looping, and single-cycle MAC, so control-law calculations complete within tight PWM interrupt windows. The GS family was designed specifically for digital power: peripheral interconnects allow ADC results to trigger PWM updates with minimal CPU latency. Typical applications include AC-DC converters, DC-DC converters, power factor correction (PFC) stages, and uninterruptible power supplies (UPS), where deterministic PWM control and fast analog feedback are essential. It is also used in LED drivers and battery chargers. Design consideration: the -I grade part is rated -40C to +85C; for +125C environments choose the /E temperature variant in the same family. This page synthesizes distributor listings, cross-reference data, drop-in alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33FJ06GS101-E/P

DSPIC33FJ06GS101-E/P - 16-bit DSC 40MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101-E/P is a 16-bit digital signal controller (DSC) from the dsPIC33F GS digital-power family, delivering up to 40 MIPS with 6 KB of flash program memory and 256 bytes of SRAM, housed in an 18-pin PDIP package rated for -40C to +125C operation. A digital signal controller combines the computational capability of a digital signal processor with the peripheral integration and ease of use of a microcontroller. Within the power-management hierarchy, the dsPIC33F GS family sits as a dedicated digital power-conversion controller: a 16-bit MCU core plus DSP engine, feeding dedicated high-speed PWM, analog comparators, and a 10-bit ADC tailored for switch-mode power supply control loops. Key features include the 40 MIPS dsPIC33F core, a 6-channel 10-bit ADC with up to 1.1 Msps sampling for fast current- and voltage-loop feedback, a high-speed PWM module supporting complementary and independent outputs with dead-time control, and two analog comparators. Connectivity peripherals cover I2C, SPI, UART/USART with IrDA and LIN bus support. Architecturally, the device provides sixteen 16-bit working registers, DSP multiply-accumulate instructions, and hardware loop support, enabling single-chip closed-loop digital control of AC-DC converters, DC-DC converters, and power factor correction stages without external analog controllers. Typical applications include digital switch-mode power supplies, AC-DC and DC-DC converters, power factor correction, and uninterruptible power supplies, where the fast ADC and high-resolution PWM replace analog control ICs. Design consideration: the core is supplied via an internal regulator with an external VCAP/VDDCORE capacitor; follow the Microchip power-up sequencing guidance in the family datasheet. The -E temperature grade (-40C to +125C) suits industrial power environments. This page synthesizes distributor pricing, drop-in family alternatives, and practical design notes not consolidated in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33FJ06GS101-E/SO

DSPIC33FJ06GS101-E/SO - 16-bit DSC 40MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101-E/SO is a 16-bit digital signal controller (DSC) from the dsPIC33F GS family, delivering 40 MIPS performance from 6 KB of FLASH program memory with 256 bytes of RAM, a 6-channel 10-bit ADC, and high-speed PWM peripherals, housed in an 18-pin SOIC package with extended temperature support (-40C to +125C). A digital signal controller combines the computational core of a 16-bit microcontroller with the numeric throughput of a DSP engine. Within the power-management hierarchy, the DSC sits above basic MCUs and below standalone DSPs, executing closed-loop control math (PID, compensation filters) while integrating converters, timers, and analog peripherals on one chip - the ideal class for digitally controlled switch-mode power supplies. Key features include a dsPIC33F core with DSP multiply-accumulate instructions running at 40 MIPS, up to three 16-bit timers (pairable into one 32-bit timer), two input capture and two output compare channels with glitchless 16-bit PWM, and a 6-channel 10-bit ADC targeted at power-conversion feedback loops. The device supports I2C, SPI, and UART/USART serial interfaces for system communication. The GS family is explicitly architected for digital power: high-resolution PWM modules, fast analog comparators, and ADC sampling synchronized to the PWM period enable multi-loop control of converters at switching frequencies well into the hundreds of kilohertz. The 6 KB FLASH accommodates compact control firmware typical of single- or dual-loop converter designs. Typical applications include AC-to-DC converters, DC-to-DC converters, power factor correction (PFC) stages, uninterruptible power supplies (UPS), LED drivers, and battery chargers - all fields Microchip lists for the GS family in its SMPS datasheet documentation. Design consideration: the part operates from a 3.0 V to 3.6 V supply, so level-shift the PWM outputs when driving gate drivers referenced to different rails, and pair PGECx/PGEDx pins correctly during ICSP programming. This page adds value beyond the Microchip datasheet by aggregating distributor pricing context, drop-in alternatives, comparison tables, and practical design notes in one structured reference.

Permintaan RFG Kontak

DSPIC33FJ06GS101-I/P

DSPIC33FJ06GS101-I/P - 16-bit DSC 40MIPS 18-PDIP | Microchip

The Microchip Technology DSPIC33FJ06GS101-I/P is a 16-bit digital signal controller (DSC) integrating a dsPIC33F core rated at 40 MIPS, 6 KB (6K x 8) of Flash program memory, and a high-speed PWM, 10-bit ADC, and analog comparator set, packaged in an 18-pin PDIP (0.300 in, 7.62 mm) through-hole package. A digital signal controller combines the computational throughput of a DSP with the peripheral integration and control peripherals of a microcontroller. Within the power-management silicon hierarchy, the dsPIC33F GS family sits above generic MCUs by adding dedicated SMPS peripherals, making it a power conversion IC class device used across AC-DC converters, DC-DC converters, PFC stages, and UPS inverters. Key features include the 40 MIPS 16-bit dsPIC core with DSP instruction extensions (MAC, multiply-accumulate, modulo addressing), a high-resolution PWM module purpose-built for digital switch-mode power supplies, a fast 10-bit ADC, and on-chip comparators that close current-mode control loops without external components. Architecturally, the device provides sixteen 16-bit working registers in the programmer's model, with each usable as data, address, or address-offset register. This register file, combined with single-cycle MAC and dual operand fetch, supports deterministic control-loop execution for voltage-mode, current-mode, and multi-loop digital power topologies at switching frequencies in the hundreds of kilohertz. Typical applications include AC to DC converters, DC to DC converters, power factor correction (PFC), uninterruptible power supplies (UPS), inverters, embedded power-supply controllers, circuit breakers, arc fault detection, and digital lighting, per the Microchip GS-family datasheet. Design consideration: the part operates from 3.0V to 3.6V, so pair it with an LDO or buck regulator; use the ICSP/ICD two-pin interface (PGD/PGC) for in-circuit debugging and programming during development. This page adds distributor-derived pricing tiers, drop-in alternatives, comparison tables, and practical design notes that the manufacturer datasheet alone does not provide.

Permintaan RFG Kontak

DSPIC33FJ06GS101A-E/P

DSPIC33FJ06GS101A-E/P - 16-bit DSC 40 MIPS 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101A-E/P is a 16-bit Digital Signal Controller (DSC) delivering 40 MIPS performance with 6KB (2K x 24) of FLASH program memory, 256 bytes of RAM, and high-speed PWM, ADC, and comparator peripherals in an 18-pin PDIP package rated for -40C to +125C operation. A Digital Signal Controller combines the computational throughput of a DSP with the peripheral integration and control-oriented architecture of a microcontroller. Within the power-management hierarchy, the DSC sits above a standard MCU for real-time control loops: it executes proportional-integral control, filtering, and modulation tasks deterministically, making the dsPIC 33F family a core building block of digital power supplies alongside gate drivers and power stages. Key differentiating features include the 16-bit dsPIC33F core with DSP engine (40 MIPS at 3.3V), high-resolution high-speed PWM modules purpose-built for switch-mode power conversion, an integrated analog block with high-speed comparators and ADC for current-mode feedback, and serial connectivity via I2C, SPI, UART/USART, IrDA, and LINbus for system telemetry and configuration. Architecturally, the device belongs to the dsPIC33FJ06GS101A family documented in the Microchip data sheet DS-75018B, which was designed specifically for multi-loop digital switch-mode power supplies (SMPS). The tightly coupled PWM/ADC/comparator subsystem enables cycle-by-cycle current limiting and fast loop response without external analog components. Typical applications include AC-to-DC converters, DC-to-DC converters, Power Factor Correction (PFC) stages, uninterruptible power supplies (UPS), and automotive-grade digital power modules, where the E-temperature (-40C to +125C) and AEC-Q100 lineage of the family are decisive. For design, note that this is a 3.0V to 3.6V device; level-shift or buffer any 5V signals, and use the MCLR pin with a proper programming header for In-Circuit Serial Programming (ICSP). This page adds distributor-verified pricing, drop-in alternative analysis, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak

DSPIC33FJ06GS101A-I/P

DSPIC33FJ06GS101A-I/P - 16-bit 40 MIPS DSC, 6KB Flash | Microchip

The Microchip Technology DSPIC33FJ06GS101A-I/P is a 16-bit digital signal controller (DSC) delivering up to 40 MIPS from its dsPIC33F core, with 6 KB (2K x 24) of FLASH program memory, 256 words of SRAM, and an integrated high-speed PWM, ADC and analog comparators, housed in an 18-pin PDIP (0.300 inch / 7.62 mm) through-hole package. A digital signal controller combines the computational throughput of a DSP with the peripheral set and ease of use of a microcontroller. In the product hierarchy, the DSC sits between a general-purpose MCU and a dedicated DSP: it is a 16-bit microcontroller (digital signal controller -> microcontroller -> embedded processor) optimized for closed-loop, real-time control loops such as digital power conversion and motor control. Key features include a 16-bit modified Harvard architecture executing at up to 40 MIPS, 24-bit-wide FLASH instructions, dual analog comparators with programmable references, and the high-speed PWM module with dedicated time base and dead-time control that defines the GS (SMPS) family. The -I suffix specifies the industrial temperature range of -40C to +85C. The device is fabricated in CMOS technology and operates from a 3.3 V supply (2.5 V to 3.6 V range per the family datasheet). The high-speed PWM supports complementary, push-pull and independent outputs, making the part a compact controller for switch-mode power supplies (SMPS), power factor correction (PFC) stages, and DC-DC converters. A single 10/12-bit ADC channel set and comparator outputs allow fast analog feedback loops without external components. Typical applications include interleaved PFC front ends (Microchip's 350 W interleaved PFC reference design is based on this family), digital AC-DC and DC-DC power supplies, LED drivers, and battery chargers. Design consideration: choose the PDIP package for prototyping and low-volume through-hole boards; for production SMT, the same die is offered in SOIC and SSOP packages, but those are not footprint-compatible with the 18-pin DIP. This page synthesizes distributor pricing, drop-in same-family alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak

DSPIC33FJ06GS101A-I/SO

DSPIC33FJ06GS101A-I/SO - 40 MIPS SMPS DSC 6KB FLASH | Microchip

The Microchip Technology DSPIC33FJ06GS101A-I/SO is a 16-bit dsPIC33F Digital Signal Controller (DSC) delivering 40 MIPS performance with 6KB (2K x 24) of FLASH program memory and 256 bytes of RAM, housed in an 18-pin SOIC package (0.295 inch, 7.50 mm width). It operates from a 3.0V to 3.6V supply across the industrial -40C to +85C temperature range. A Digital Signal Controller combines a microcontroller (MCU) with digital signal processor (DSP) features in a single core. In the power-management hierarchy, the dsPIC33F GS family sits between general-purpose MCUs and dedicated digital power ICs, providing programmable control loops for switch-mode power supplies (SMPS) rather than fixed-function hardware. Key features include high-speed PWM peripherals purpose-built for digital power conversion, on-chip analog comparators, ADC inputs, and connectivity via I2C, SPI, UART/USART, IrDA and LIN. Brown-out detect and watchdog peripherals support robust operation in mains-powered equipment. The architecture pairs the 16-bit dsPIC core with DSP instructions, enabling fast execution of PID and compensation-loop algorithms. The GS-series peripheral set was designed specifically for multi-loop digital SMPS topologies, so phase current sharing, burst mode and fault blanking can be implemented in firmware. Typical applications include AC to DC converters, DC to DC converters, Power Factor Correction (PFC) stages, and uninterruptible power supplies (UPS), plus digital lighting ballasts. Design tip: verify errata sheets from Microchip before finalizing firmware, and budget the 256-byte RAM carefully when writing control loops in C with the MPLAB XC-DSC compiler. This page adds value beyond the datasheet by synthesizing distributor pricing, drop-in family alternatives, application guidance, and comparison data in one place.

Permintaan RFG Kontak

Subkategori

Produk (39.000+)

DSPIC33EV64GM102-I/MM - 16-Bit 70 MIPS 5V DSC | Microchip

DSPIC33EV64GM102-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV64GM102T-I/SO - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV64GM103-I/M5 - 70MIPS 5V DSC, CAN | Microchip

DSPIC33EV64GM103T-I/M5 - 16-bit 70 MIPS 5V DSC | Microchip

DSPIC33EV64GM104-E/ML - 16-bit 60 MIPS 5V DSC, CAN | Microchip

DSPIC33EV64GM104-I/ML - 5V 70 MIPS 16-bit DSC 64KB Flash | Microchip

DSPIC33EV64GM104T-I/ML - 16-bit 5V 70 MIPS DSC | Microchip

DSPIC33EV64GM104T-I/PT - 16-bit 70 MIPS 5V DSC 64KB | Microchip

DSPIC33EV64GM106-E/MR - 16-Bit 60MIPS 5V DSC 64KB | Microchip

DSPIC33EV64GM106-I/MR - 16-bit 5V 70MIPS DSC 64KB Flash | Microchip

DSPIC33EV64GM106-I/PT - 64KB Flash 16-bit DSC, 64-TQFP | Microchip

DSPIC33EV64GM106T-I/PT - 16-bit 70 MIPS 64KB DSC | Microchip

DSPIC33FJ06GS001-E/P - 16-bit 40 MIPS DSC 18-PDIP | Microchip

DSPIC33FJ06GS001-I/SO - 16-bit DSC 40 MIPS 6KB Flash | Microchip

DSPIC33FJ06GS001-I/SS - 16-bit 40 MIPS SMPS DSC | Microchip

DSPIC33FJ06GS001T-I/SO - 16-bit 40 MIPS SMPS DSC | Microchip

DSPIC33FJ06GS001T-I/SS - 16-bit DSC 40 MIPs 6KB Flash | Microchip

DSPIC33FJ06GS101-E/P - 16-bit DSC 40MIPS 6KB Flash | Microchip

DSPIC33FJ06GS101-E/SO - 16-bit DSC 40MIPS 6KB Flash | Microchip

DSPIC33FJ06GS101-I/P - 16-bit DSC 40MIPS 18-PDIP | Microchip

DSPIC33FJ06GS101A-E/P - 16-bit DSC 40 MIPS 6KB Flash | Microchip

DSPIC33FJ06GS101A-I/P - 16-bit 40 MIPS DSC, 6KB Flash | Microchip

DSPIC33FJ06GS101A-I/SO - 40 MIPS SMPS DSC 6KB FLASH | Microchip