EPC1PC8CC
EPC1PC8CC - 1Mb FPGA Config PROM | Intel (Altera) | 8-Pin DIP
The Intel (formerly Altera) EPC1PC8CC is a 1-Mbit serial-configuration PROM designed to store configuration bitstreams for the ACEX 1K, APEX 20K, APEX II, ARRIA, Cyclone, Cyclone II, FLEX 10K, FLEX 6000, FLEX 8000, MAX 7000B/AE/S, MAX 9000, Mercury, Stratix, and Stratix II FPGA families. The device ships in an 8-pin PDIP plastic dual-in-line package (suffix PC8) and provides non-volatile, in-system serial configuration through a four-pin Altera serial configuration interface that includes nSTATUS, nCONFIG, DCLK, and DATA0 signals.
A serial configuration PROM is a specialized non-volatile memory whose purpose is to boot an SRAM-based FPGA at power-up. Because SRAM FPGAs lose their configuration when power is removed, the PROM holds the bitstream image and serially clocks it into the FPGA's internal configuration RAM via the proprietary Altera Passive Serial (PS) mode. Within the power-management taxonomy, EPC1PC8CC sits at the boundary between Memory ICs and FPGA support components - a Configuration PROM is functionally a one-time-programmable (OTP) serial Flash memory that serves the FPGA boot function.
Key features of the EPC1PC8CC include 1 Mb (1,048,576 bits) of configuration storage, a 17.6 Mb/s maximum DCLK configuration clock rate, automatic CRC error checking during bitstream transfer, an open-drain nSTATUS indicator pin, and a low-pin-count DIP-8 footprint that simplifies through-hole assembly for legacy and industrial designs. The device operates from a 3.3 V supply (VCC range 3.0 V to 3.6 V) and supports in-system programming via the JTAG chain when used with the Altera Quartus / Quartus Prime programmer.
The internal array is organized as 1 Mb and uses EPROM technology, which is one-time-programmable but can be repeatedly read without wear. Altera's design allows the EPC1 to cascade with up to 16 additional EPC devices in a configuration chain via nCASC pin, although the PC8 package does not expose nCASC - only single-device configurations are supported in this footprint.
Typical applications include FPGA configuration memory for industrial control boards, test and measurement instruments, prototyping platforms, communication line cards, and legacy Altera Cyclone/Stratix designs. The DIP-8 through-hole package makes the EPC1PC8CC particularly suitable for evaluation boards and breadboard-based prototypes where socketed, replaceable configuration memory is desired. The non-volatile, factory-programmed or JTAG-programmable nature of the configuration storage makes the EPC1PC8CC a one-time-programmable configuration source ideal for low-volume and production designs.
When designing with this device, note that the EPC1PC8CC is one-time programmable; designers must verify the configuration image with Quartus programmer before committing the device. Designers should also account for an inrush current of up to 50 mA during configuration, and ensure that the upstream 3.3 V regulator can supply peak loads. The DIP-8 footprint cannot be cascaded - for multi-device configuration chains select the PLCC or TQFP variants of EPC1 or use EPC2.
This page synthesizes XAIPART pricing tiers, drop-in EPC1 family alternatives that share the same DIP-8 footprint, and practical design notes not found in the original datasheet - a unique information gain that complements the manufacturer document and reduces design-in time for engineers maintaining legacy Altera-based boards.
Permintaan RFG
Kontak