MAX174BCPI
MAX174BCPI - 12-Bit 8µs SAR ADC with Reference | Maxim Integrated | PDIP-28
The Maxim Integrated MAX174BCPI is an industry-standard, complete 12-bit analog-to-digital converter (ADC) in a 28-pin PDIP package, featuring an on-chip voltage reference, internal clock, and 8µs maximum conversion time. It is a successive-approximation register (SAR) ADC with one analog input channel, a parallel digital interface, and bipolar input ranges of ±5V, ±10V, 0-10V, and 0-15V. The integrated 10V buried-zener reference and clock oscillator eliminate the need for external components, simplifying precision data-acquisition designs in industrial instrumentation.
A SAR ADC is a successive-approximation-register analog-to-digital converter, which is a subtype of ADC that uses a binary-search algorithm against an internal DAC to digitize an analog input in N clock cycles for N bits of resolution. SAR ADCs occupy the middle ground in the ADC taxonomy: they offer higher speed than integrating or delta-sigma converters but lower speed than flash ADCs, while delivering excellent DC accuracy, low latency, and low power consumption without the switching noise inherent to delta-sigma architectures. The MAX174 belongs to the broader category of data-acquisition ICs, which sit within signal-chain components and ultimately within the power-management-and-analog IC family of semiconductors.
Key features include 12-bit resolution with no missing codes, ±0.5 LSB maximum integral nonlinearity (INL), and a track/hold amplifier capable of digitizing signals up to its Nyquist bandwidth. The device operates from ±12V or ±15V supplies, drawing typically 80 mW, with a power-down mode that reduces consumption to under 5 mW between conversions. The 8µs conversion time translates to a 125 kHz throughput, suitable for high-speed industrial control loops and multi-channel multiplexing systems.
The internal architecture uses a capacitive-charge-redistribution DAC for the SAR loop, a precision buried-zener reference laser-trimmed for low drift, and a self-biasing bipolar front end that accepts true bipolar input signals without external signal conditioning. The device includes control logic that allows direct connection to microprocessors via the 12-bit parallel bus, with standard CS, RD, and BUSY handshake signals compatible with 8080-family processor interfaces.
Typical applications include industrial process-control data acquisition, digital panel meters, instrumentation amplifiers digitizing strain-gauge signals, multi-channel data-logging multiplexed systems, and benchtop test-and-measurement equipment. The wide bipolar input range makes it particularly attractive in legacy 12-bit data-acquisition boards where direct connection to ±10V transducer outputs is required without external resistor attenuators or level-shift circuits.
When designing with this device, ensure the power-supply bypass network uses 10 µF tantalum in parallel with 0.1 µF ceramic at each supply pin; failure to provide adequate decoupling degrades the reference noise and INL. The analog input must be protected with an external op-amp buffer or low-impedance driving source to avoid kick-back from the internal capacitive DAC, which would otherwise introduce settling errors at the rated 8 µs conversion speed.
This page synthesizes distributor pricing, drop-in alternatives, application guidance, and design notes not aggregated on the manufacturer datasheet, providing an engineer-ready summary for sourcing and design-in decisions.
Permintaan RFG
Kontak