Produk (46.000+)

MAX3384ECWN+ - 250kbps RS-232 Transceiver | Analog Devices
MAX3384ECWN+

MAX3384ECWN+ - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3384ECWN+ is a 3.0V-powered, 2/2 RS-232 transceiver supporting data rates up to 250kbps in a 20-pin SSOP package. It provides two transmit channels, two receive channels, low-power operation, and enhanced electrostatic-discharge protection for reliable point-to-point serial interfaces. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts received RS-232 levels back into digital logic. It belongs to the transceiver hierarchy within interface ICs, providing the physical signaling layer between data-processing equipment and a cable-connected peripheral or system. The MAX3384ECWN+ implements the EIA/TIA-232 and V.28/V.24 signaling requirements described for this device family. The principal features include operation from a 3.0V to 5.5V supply, operation up to 250kbps, two transmit outputs, two receive inputs, and enhanced ESD protection. Low-power requirements make the device suitable for systems in which interface circuitry must coexist with low-voltage digital logic. The manufacturer describes protection on both transmitter outputs and receiver inputs, which is important when cables may be connected, disconnected, or exposed to electrostatic discharge. The MAX3384ECWN+ combines true RS-232 line-driver and receiver functions in one integrated circuit. Its powered-down behavior reduces power consumption when the associated subsystem is inactive. Because the interface operates from a single low-voltage supply while generating compliant RS-232 levels, it can simplify designs that would otherwise require separate external line drivers, receivers, and protection networks. Typical uses include industrial control consoles, point-of-sale terminals, test equipment, instrumentation, and embedded systems that communicate with RS-232 peripherals through cables. The 250kbps capability is useful for moderate-speed serial links, while the integrated two-channel transmitter and receiver arrangement reduces the number of components required for bidirectional or multiport serial interfaces. The principal design consideration is the difference between RS-232 and TTL-level signaling. The MAX3384ECWN+ is intended for the RS-232 side of the connection; it does not directly accept or produce standard TTL or CMOS logic levels. Layout should preserve short return paths and appropriate grounding, while external protection and cable-length considerations should follow the manufacturer's interface guidance. This product page combines the device's core electrical characteristics, verified package information, practical application guidance, and documented same-family replacement options. It also distinguishes true pin-compatible alternatives from broader RS-232 interface products that may use a different package, voltage rating, feature set, or channel arrangement.

Permintaan RFG Kontak
MAX3384ECWN+T - 250kbps RS-232 Transceiver | Analog Devices
MAX3384ECWN+T

MAX3384ECWN+T - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3384ECWN+T is a 2/2 RS-232 transceiver with a 3.0V to 5.5V supply range, data rates up to 250kbps, and 15kV ESD protection, housed in an 18-pin SOIC package. It combines two transmitters and two receivers in one device, providing bidirectional serial-interface conversion for equipment that communicates through EIA/TIA-232 and V.28/V.24 links. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 levels and converts incoming RS-232 signals back into digital logic levels. It belongs to the interface IC hierarchy, where the transceiver performs the physical signal conversion between a host controller or UART and an RS-232 port. This integration reduces the number of discrete line-driver and receiver components required at the board level. The MAX3384ECWN+T operates from 3.0V to 5.5V, supports data rates up to 250kbps, and provides 15kV ESD protection. The Analog Devices manufacturer page specifies that all transmitter outputs and receiver inputs are protected. Its 18-pin SOIC package supports conventional surface-mount assembly and is suitable for industrial-control, communications, instrumentation, and embedded-system interfaces operating across 0°C to 70°C. The device uses two transmitters and two receivers, allowing two serial channels or full-duplex operation depending on how the interface pins are connected. Because it is a true RS-232 transceiver rather than a differential RS-422 or RS-485 device, its voltage levels and application role are not interchangeable with those bus standards. The 250kbps maximum data rate is suitable for legacy serial equipment, control consoles, POS systems, and industrial peripherals that use EIA/TIA-232. Typical applications include point-of-sale terminals, security and access-control equipment, test and measurement instruments, industrial controllers, and service-console interfaces. The integrated ESD protection is particularly valuable where an exposed serial cable can introduce electrostatic discharge into a control board. The 3.0V minimum supply voltage also helps the device operate alongside modern low-voltage digital systems without requiring a dedicated 5V-only interface rail. PCB design should preserve the datasheet-recommended supply and bypass-capacitor placement while keeping unprotected external connector wiring away from sensitive traces. Confirm the RS-232 signal levels and data direction in the system schematic, and verify that the 250kbps rating covers the required baud rate with suitable margin. Use the manufacturer pin-description table and pinout drawing when assigning connector and logic-net connections. This page combines the manufacturer interface description, distributor package information, replacement guidance, parameter comparisons, and practical PCB considerations in a form intended to accelerate component selection and hardware design.

Permintaan RFG Kontak
MAX3384EEAP - 3V RS-232 Transceiver, 250kbps | Analog Devices
MAX3384EEAP

MAX3384EEAP - 3V RS-232 Transceiver, 250kbps | Analog Devices

The Analog Devices MAX3384EEAP is a 3V-powered EIA/TIA-232 and V.28/V.24 communications transceiver with two drivers and two receivers in a 20-pin SSOP package. It supports operation from 3V to 5.5V, delivers data rates up to 250kbps, and provides enhanced electrostatic discharge protection on the transmitter outputs and receiver inputs. The device is designed for low-power RS-232 links where supply voltage, communication speed, and transient protection are the primary design requirements. An RS-232 transceiver is an interface IC that converts logic-level UART signals into RS-232 bipolar levels and converts received RS-232 levels back into CMOS-compatible logic. The MAX3384EEAP belongs to the interface IC hierarchy alongside serial transceivers, line drivers, and level-shifting ICs. Its two-driver, two-receiver arrangement supports full-duplex point-to-point communication, including flow-control lines between two data-terminal systems. Key features include a 3V to 5.5V supply range, operation up to 250kbps, low-power operation with shutdown and receiver active-low features, and ±15kV air-gap ESD protection on all transmitter outputs and receiver inputs. Contact discharge protection is rated at ±8kV using the IEC 1000-4-2 test method. These protection levels are important when the connector is exposed to cable discharge events or an industrial noise environment. The MAX3384E uses charge-pump circuitry to generate the bipolar voltage required by the RS-232 drivers, allowing operation from a single low-voltage supply. This architecture eliminates the need for a separate negative supply rail. The resulting single-supply implementation reduces board complexity in systems that already operate from 3.3V or 5V, while the driver stage provides the voltage swing expected by RS-232 receivers. Typical applications include industrial serial consoles, point-of-sale terminals, data-acquisition equipment, instrument control links, and embedded systems that communicate with legacy RS-232 peripherals. The 250kbps maximum data rate supports modern UART traffic while remaining compatible with the slower signaling commonly used by V.28 and V.24 equipment. The package is also suitable for compact control boards where connector access is limited. When laying out the circuit, place the device close to the RS-232 connector to minimize the length of unprotected traces between the IC and connector. Follow the pin-description and decoupling guidance in the manufacturer datasheet, and maintain the recommended charge-pump capacitor connections. Do not treat the internal ESD protection as a substitute for a properly designed external surge-protection network when cables leave the enclosure. This page combines device specifications, same-footprint drop-in alternatives, pin-level guidance, and application-focused design notes. It also highlights the MAX3384EEAP's balance of 3V supply operation, 250kbps throughput, low-power features, and enhanced IEC 1000-4-2 ESD protection for engineers evaluating a modern single-supply RS-232 interface.

Permintaan RFG Kontak
MAX3385ECAP - 250kbps True RS-232 Transceiver | Analog Devices
MAX3385ECAP

MAX3385ECAP - 250kbps True RS-232 Transceiver | Analog Devices

The Analog Devices MAX3385ECAP is a 2/3 transceiver with integrated charge pump and true RS-232 line drivers and receivers, operating from 3.0V to 5.5V at data rates up to 250kbps. The device is packaged in a 20-pin SSOP and provides 15kV ESD protection on its serial interface. An RS-232 transceiver is an interface integrated circuit that converts between single-ended logic-level signals and the bipolar voltage levels used by RS-232 equipment. A line driver translates logic states into RS-232-compatible outputs, while a line receiver performs the reverse conversion. The MAX3385ECAP integrates one driver and two receivers, commonly described as a 2/3 transceiver, for asymmetric point-to-point communication links. The MAX3385ECAP supports supply voltages from 3.0V to 5.5V, allowing operation from common 3.3V and 5V systems. Its maximum guaranteed data rate is 250kbps, making it suitable for point-to-point industrial control, instrumentation, data acquisition, and embedded equipment. The 15kV ESD rating strengthens its suitability for connectors and cables exposed to electrostatic discharge. Its dual charge-pump architecture generates the positive and negative voltages required for true RS-232 output levels without a separate negative supply rail. The manufacturer datasheet states that four 0.1uF capacitors are sufficient for operation from a 3.3V supply. A proprietary low-dropout transmitter output stage helps maintain compliant output levels across the supported supply range while controlling power consumption. Typical uses include serial configuration ports, test and measurement equipment, industrial controllers, barcode scanners, printers, and external data-acquisition modules. The 20-pin SSOP package supports compact surface-mount layouts, while the combination of 3.0V minimum supply, 250kbps throughput, and 15kV ESD protection makes the device appropriate for short-distance point-to-point links where logic-level UART signaling must cross an RS-232 cable. Pay attention to charge-pump capacitor placement and signal routing during PCB layout. Keep the charge-pump capacitors close to their associated pins, provide an uninterrupted ground reference beneath the interface, and route driver outputs and receiver inputs away from noisy switching nodes. These measures preserve signal integrity and reduce the chance that charge-pump switching activity will disturb adjacent circuitry. This product page combines the manufacturer interface specifications, package information, pricing availability, and practical RS-232 design guidance. It also distinguishes confirmed drop-in alternatives from functionally similar devices that require pinout, package, and operating-limit verification before substitution.

Permintaan RFG Kontak
MAX3385ECAP-T - 250kbps RS-232 IC | Analog Devices
MAX3385ECAP-T

MAX3385ECAP-T - 250kbps RS-232 IC | Analog Devices

Analog Devices MAX3385ECAP-T is a low-power, true RS-232 transceiver IC rated for data rates up to 250kbps and operating from a 3.0V to 5.5V supply. The device provides two drivers and three receivers in a 20-pin SSOP package and includes protection for exposed RS-232 lines rated to 15kV ESD. Its combination of multi-driver and multi-receiver channels suits equipment that exchanges data across several serial interfaces. A true RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 voltage levels and converts incoming RS-232 signals back into digital logic levels. The MAX3385ECAP-T belongs to the RS-232 transceiver family within interface ICs, where it sits between a host controller or data-processing system and a cable-based peripheral. Unlike a single-direction line driver or receiver, the integrated transceiver supports both transmission and reception while limiting the number of external interface components. The MAX3385ECAP-T supports supply voltages from 3.0V to 5.5V, making it suitable for systems that operate from either 3.3V or 5V logic rails. Its stated maximum signaling rate is 250kbps, which provides sufficient bandwidth for common point-to-point control, instrumentation, industrial, and data-acquisition links. The integrated 15kV ESD protection is a principal feature for interfaces connected to external cables, where electrostatic discharge can enter through a connector and damage an unprotected transceiver. This device is identified as a 2/3 transceiver, meaning that two driver channels and three receiver channels are available for asymmetric RS-232 links. The manufacturer datasheet describes the MAX3385ECAP as a low-power true RS-232 transceiver for 3.0V to 5.5V operation. Its SSOP-20 package provides a compact surface-mount format, while the -T ordering suffix identifies the tape-and-reel shipping form associated with this exact manufacturer part number. Typical uses include industrial control links, test and measurement equipment, data-logging systems, point-of-sale equipment, and embedded serial interfaces. The combination of a 250kbps data rate and multiple receiver channels is particularly useful where one controller must monitor several incoming RS-232 signals while transmitting command or status data through another channel. External charge-pump capacitors and connector protection arrangements should follow the pin-description and typical-application diagrams in the manufacturer datasheet. Designers should verify that the system ground and signal-return arrangement satisfy the RS-232 interface requirements before placing the IC. The maximum cable length and achievable rate depend on the complete transceiver circuit, cable impedance, connector, noise environment, and system baud rate; the 250kbps figure is the device rating rather than a guarantee for every installed link. Decoupling and charge-pump routing should follow the recommended layout because switching-regulator and charge-pump currents can couple into sensitive signal paths. This product page consolidates the exact MAX3385ECAP-T electrical ratings, package information, interface characteristics, sourcing path, and engineering guidance into one reference. It also distinguishes confirmed pin-compatible replacements from merely similar RS-232 transceivers, helping designers avoid assuming that equivalent protocol functions guarantee PCB-level drop-in compatibility.

Permintaan RFG Kontak
MAX3385ECWN - 250kbps True RS-232 Transceiver | Analog Devices
MAX3385ECWN

MAX3385ECWN - 250kbps True RS-232 Transceiver | Analog Devices

Analog Devices MAX3385ECWN is a true RS-232 transceiver IC supporting a 3.0V to 5.5V supply, data rates up to 250kbps, and ESD protection rated at ±15kV. The device is offered in an 18-SOIC package and provides two drivers and three receivers, making it suitable for bidirectional and multi-channel serial-interface equipment. A true RS-232 transceiver is an interface IC that converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. RS-232 is a point-to-point, unbalanced serial-interface standard widely used for industrial control, data acquisition, instrumentation, and legacy peripheral connections. Its transmitter and receiver circuitry provide the voltage conversion and noise tolerance required when logic levels must communicate with a longer, unbalanced cable. The MAX3385ECWN supports operation from a single 3.0V to 5.5V supply, allowing use in both 3.3V and 5V systems. Its maximum data rate of 250kbps is suitable for moderate-speed serial links, and the ±15kV ESD rating adds protection for exposed connector pins. The 2/3 driver-receiver configuration is useful when a design requires more receiver channels than transmitter channels. The MAX3385ECWN family uses integrated true RS-232 line-driver and line-receiver stages rather than a limited-voltage-only interface. This distinction is important when connecting to equipment that expects RS-232 voltage levels. Its operating-temperature range is specified as 0°C to 70°C for the commercial-grade CWN configuration, making it appropriate for equipment intended for controlled indoor or industrial environments within that range. Typical uses include industrial serial adapters, programmable-logic-controller communication, test and measurement instruments, barcode and data-acquisition equipment, and embedded control systems that retain an RS-232 port. Systems operating at 250kbps should include appropriate cable routing and grounding because unbalanced RS-232 performance can still be affected by ground offsets, electromagnetic interference, and connector cable characteristics. PCB implementation should follow the manufacturer's pin and decoupling guidance, particularly for supply connections and exposed RS-232 pins. Place the required bypass capacitor close to the device, route transceiver outputs to the connector through a short and appropriately arranged path, and confirm that system grounding satisfies the interface requirements before enabling communication. This page combines the manufacturer-oriented device identity, verified distributor descriptions, RS-232 design guidance, package details, and replacement analysis. It also identifies where additional electrical, mechanical, and lifecycle information must be confirmed in the manufacturer datasheet or through a current manufacturer quotation.

Permintaan RFG Kontak
MAX3385EEAP - 250kbps RS-232 Transceiver | Analog Devices
MAX3385EEAP

MAX3385EEAP - 250kbps RS-232 Transceiver | Analog Devices

The Analog Devices MAX3385EEAP is a low-power RS-232 transceiver rated for data rates up to 250kbps and operation from a 3.0V to 5.5V supply. The device is offered in a 20-pin SSOP package and provides the driver and receiver functions required to connect a modern digital circuit to an RS-232 serial port. Its integrated protection is specified for ±15kV electrostatic-discharge exposure on the serial lines. An RS-232 transceiver is an interface IC that belongs to the line-driver and line-receiver hierarchy within interface semiconductors. It converts logic-level signals into RS-232-compatible levels in the transmit direction and converts incoming RS-232 levels back into logic levels in the receive direction. The MAX3385EEAP therefore provides the physical signaling layer between equipment logic and a cable-based serial interface. Key characteristics include support for both 3.0V and 5.5V supply operation, a maximum signaling rate of 250kbps, low-power design, true RS-232 transceiver operation, and ±15kV ESD protection. The 3.0V minimum supply makes the interface suitable for systems whose digital core operates below 5V, while the 5.5V upper limit allows use with conventional 5V equipment. The 250kbps rate supports modern point-to-point serial links without requiring the lower bandwidth associated with legacy communication standards. The MAX3385EEAP combines two transmit drivers and two receive receivers in one package, matching the conventional direction and signal arrangement used by RS-232 interface designs. Its integrated ESD protection reduces the amount of external protection normally required at a connector or cable entry. Applications still require correct signal routing, suitable bypass capacitance, controlled return paths, and compliance with the applicable RS-232 electrical requirements. Typical uses include industrial control consoles, test equipment, data acquisition systems, service interfaces, and embedded products that retain an RS-232 port for configuration or diagnostics. The part is particularly useful where modern 3.3V logic must communicate with an RS-232 host while board area and external protection components must be minimized. Designers should begin with the manufacturer's pin-description table when assigning PCB tracks and must preserve the documented charge-pump and driver topology around the transceiver. Input and supply bypassing should be placed close to the relevant pins, and connector-side protection must be reviewed against the required ESD exposure and working voltage. This page consolidates the core electrical and package characteristics of the MAX3385EEAP with application guidance, comparison parameters, and practical interface-design considerations. It is intended to help engineers determine whether the device's voltage range, data rate, package, and protection level match a particular RS-232 design before committing the footprint to a PCB.

Permintaan RFG Kontak
MAX3386ECDW - 3/2 RS-232 Transceiver, 250kbps | Texas Instruments
MAX3386ECDW

MAX3386ECDW - 3/2 RS-232 Transceiver, 250kbps | Texas Instruments

The Texas Instruments MAX3386ECDW is a full-duplex RS-232 transceiver with three drivers and two receivers, a maximum data rate of 250kbps, and a 3V to 5.5V supply range in a 20-pin SOIC package. The device includes a split logic-side supply arrangement for mixed-signal systems. An RS-232 transceiver is an interface IC that converts between single-ended logic-level signals and the bipolar voltage levels used by the RS-232 standard. It belongs to the communication transceiver family, which sits above line drivers and receivers in the interface hierarchy and ultimately supports serial data links in industrial, commercial, and embedded equipment. Key electrical features include 500mV receiver hysteresis for improved noise immunity, 3V to 5.5V operation, and ±25kV ESD protection as identified for this device. The three-driver, two-receiver arrangement supports multiple outbound channels and two inbound channels within one package. Full-duplex operation allows simultaneous transmission and reception, while the split supply pins give the circuit designer independent control over the logic-side supply arrangement. The MAX3386ECDW operates from 0°C to 70°C and is specified for surface-mount assembly in a 20-SOIC package measuring 0.295 inches, or 7.50mm, wide. Its 250kbps signaling rate is suitable for configuration ports, instrumentation, point-of-sale equipment, and legacy industrial control links. The integrated protection reduces the need for separate surge-protection components on exposed serial lines. Typical applications include RS-232 ports for embedded controllers, test and measurement instruments, industrial diagnostic interfaces, and data acquisition systems. Because this part is obsolete, engineers should confirm availability, lifecycle status, and any manufacturer-approved migration path before releasing a new production design. When laying out the board, keep the logic-side connections short and route the RS-232 lines away from clocks, switching regulators, and high-current power paths. Verify the external charge-pump capacitor values against the manufacturer datasheet and treat the RS-232 pins as external-facing signal nodes during EMC and ESD reviews. This page consolidates device specifications, lifecycle information, pin-compatible alternatives, and design guidance for engineers evaluating the MAX3386ECDW against current RS-232 interface options.

Permintaan RFG Kontak
MAX3386ECDWG4 - RS-232 Transceiver | Texas Instruments
MAX3386ECDWG4

MAX3386ECDWG4 - RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3386ECDWG4 is a dual line RS-232 transceiver with a split supply pin for the logic side, designed for mixed-voltage serial-interface systems. It is packaged in a 20-pin SOIC (0.295 inch, 7.50 mm width) and is identified as a commercial-grade RS-232 interface IC. The device supports ESD protection on the RIN inputs and DOUT outputs, including ±15 kV human-body-model protection, and is also described as a 3 V and ±25 kV ESD RS-232 device. An RS-232 transceiver is a signal-interface semiconductor that combines line drivers and line receivers to connect a digital logic system to a serial port using RS-232 electrical levels. In the hierarchy of electronic components, it belongs to the interface-IC family, specifically the RS-232 line-driver and receiver category. The split logic-side supply feature allows the logic-side voltage to be selected for compatibility with systems using mixed supply levels, while the RS-232 side handles the higher voltage signaling required by the standard. The MAX3386ECDWG4 is designed for applications requiring bidirectional or multi-line RS-232 connectivity, protection for exposed serial lines, and operation in a compact SOIC-20 package. Its stated ESD capability is particularly useful when the connector or cable interface may be exposed to electrostatic discharge during insertion, removal, or industrial handling. The commercial temperature designation indicates its intended use in commercial equipment rather than an automotive-qualified environment. The MAX3386E family uses split supply pins to support operation in mixed-signal systems. The logic-side supply feature allows a system designer to interface the transceiver with a lower-voltage digital subsystem, while the RS-232-side supply arrangement supports the voltage requirements of the line interface. The device also includes driver and receiver channels suited to point-to-point serial links, instrumentation, control equipment, and data-acquisition equipment. Typical applications include RS-232 ports in industrial controllers, laboratory instruments, POS terminals, serial adapters, embedded control boards, and communications equipment. In an industrial controller, the transceiver can place a protected RS-232 interface between a logic-level UART and an external DB9 or terminal connector. In measurement equipment, it can provide the electrical conversion and line protection needed when connecting an instrument to a host computer. Protection requirements should still be checked against the connector and cable environment. When laying out the board, place the transceiver close to the RS-232 connector and route the protected RIN and DOUT lines directly to the relevant pins to minimize exposure to electrostatic discharge and external cable transients. Confirm logic-side and RS-232-side supply levels, supply decoupling, and the UART signal levels before finalizing the design. The SOIC-20 footprint also requires adequate spacing around the pins for reliable assembly and rework. This product page combines the manufacturer-family characteristics, package information, ESD descriptions, interface details, practical application guidance, and verified replacement information for engineers evaluating the MAX3386ECDWG4. It is intended to support board-level decision making, footprint planning, cross-reference work, and RS-232 interface design rather than serving as a substitute for the complete manufacturer datasheet.

Permintaan RFG Kontak
MAX3386ECPW - 3 to 5.5V RS-232 Transceiver | Texas Instruments
MAX3386ECPW

MAX3386ECPW - 3 to 5.5V RS-232 Transceiver | Texas Instruments

The Texas Instruments MAX3386ECPW is a 3- to 5.5-V, 250-kbps RS-232 line driver/receiver with three drivers, two receivers, a logic supply pin, and plus-or-minus 15-kV IEC-ESD protection. The device is packaged in a 20-pin TSSOP package. It is designed for bidirectional serial-interface systems that require RS-232 line drivers and receivers in one compact surface-mount package. An RS-232 transceiver is an interface IC that combines differential line-driver and receiver functions for communicating between equipment over the RS-232 standard. The MAX3386ECPW converts logic-level signals to RS-232 levels and converts incoming RS-232 signals back to logic levels. Its 3- to 5.5-V operating range supports both 3.3-V and 5-V system rails, while the 250-kbps data rate is suitable for moderate-speed serial links. Key features include three RS-232 drivers, two RS-232 receivers, a separate logic supply pin, and plus-or-minus 15-kV IEC-ESD protection on the RS-232 inputs and outputs. The family is positioned for industrial-control, instrumentation, data-acquisition, and embedded equipment interfaces where a compact transceiver and electrostatic-discharge resilience are useful. The MAX3386ECPW is a member of the MAX3386E family, also identified by the manufacturer as the MAX3386E product page. The MAX3386E architecture uses charge-pump circuitry internally to generate the RS-232 transmit voltage levels. The logic-side supply and the driver-side supply arrangement allow the interface to operate with modern low-voltage digital logic while maintaining RS-232-compatible signal levels at the connector. The integrated protection helps reduce damage from electrostatic discharge events encountered during handling or field installation, although the complete system still requires appropriate board-level grounding and signal routing. Typical applications include industrial serial controllers, test and measurement equipment, barcode and data-acquisition systems, point-of-sale equipment, and embedded RS-232 links. The device is especially appropriate when the design needs three transmit channels and two receive channels rather than a one-driver, one-receiver RS-232 transceiver. When laying out a board using the MAX3386ECPW, place the device near the RS-232 connector and route driver and receiver traces away from sensitive analog or high-speed digital signals. Maintain the connector-side ground path and follow the manufacturer’s recommended charge-pump capacitor connections. Confirm the logic supply voltage, RS-232 connector pin assignment, and the required charge-pump capacitors during schematic and layout review. This page combines the manufacturer’s MAX3386E product information, distributor identification, package details, application guidance, and structured replacement information. It is intended to help engineers evaluate the MAX3386ECPW for RS-232 interface designs while checking exact pin, electrical, and compliance details against the manufacturer datasheet.

Permintaan RFG Kontak
MAX3386ECUP+ - 3/2 RS-232 Transceiver, 250kbps | Analog Devices
MAX3386ECUP+

MAX3386ECUP+ - 3/2 RS-232 Transceiver, 250kbps | Analog Devices

The Analog Devices MAX3386ECUP+ is a 3/2 RS-232 communications transceiver with three transmitters, two receivers, operation from a 3.0V to 5.5V supply, and data rates up to 250kbps. The device is housed in a 20-pin TSSOP package and is designed for low-power, portable equipment requiring EIA/TIA-232, V.28, or V.24-compatible serial interfaces. An RS-232 transceiver is an interface IC that bridges a low-voltage digital logic system and a single-ended, bipolar RS-232 link. It belongs to the communications-interface hierarchy, combining transmitter and receiver functions with the voltage conversion and protection required for unbalanced serial communication. The MAX3386ECUP+ also uses charge-pump circuitry to generate the positive and negative voltages required by RS-232 output levels from a single low-voltage supply. The MAX3386ECUP+ supports a 3.0V to 5.5V supply and operates at data rates up to 250kbps while maintaining RS-232-compliant output levels. Its dual charge pump requires four 0.1uF capacitors for operation from a 3.3V supply. The three-driver, two-receiver arrangement suits equipment with several outbound serial channels and fewer inbound channels, while enhanced electrostatic-discharge protection improves robustness in exposed cable-connected systems. The low-dropout transmitter output stage enables true RS-232 performance without requiring a 5V-only power rail, making the device useful in battery-powered and portable systems. The manufacturer describes the MAX3386E family as a low-power communications interface with high data-rate capability and enhanced ESD protection. Charge-pump switching and transmitter edge behavior should be considered when the serial link operates next to sensitive analog circuitry. Typical uses include RS-232 ports in personal digital assistants and cellular phones, diagnostic and programming interfaces, industrial equipment, point-of-sale terminals, and embedded serial adapters. Its 250kbps maximum rate provides useful margin above common asynchronous serial communication rates, while the compact 20-pin TSSOP package supports space-constrained portable products. Design the charge-pump capacitor network for the shortest practical connection to the supply and ground pins. Confirm the connector-side protection strategy and cable routing because the integrated ESD protection does not eliminate the need for correct board layout and system-level grounding. Verify signal levels and timing against the manufacturer datasheet before replacing a multi-transceiver interface. This product page combines manufacturer specifications, pin-compatible alternatives, application guidance, and practical interface-design notes. It helps engineers compare protocol capability, package compatibility, protection, and implementation constraints before selecting a compact RS-232 transceiver.

Permintaan RFG Kontak
MAX3386EEUP+ - 3V ESD-Protected RS-232 Transceiver | Analog Devices
MAX3386EEUP+

MAX3386EEUP+ - 3V ESD-Protected RS-232 Transceiver | Analog Devices

Analog Devices MAX3386EEUP+ is a 3V-powered EIA/TIA-232 and V.28/V.24 transceiver with three transmitters, two receivers, ±25 kV ESD protection, and a 20-pin TSSOP package. It combines low-power operation with high data-rate capability for portable equipment, data acquisition systems, and industrial serial interfaces. An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232-compatible voltage levels and converts incoming RS-232 signals back into digital logic. Within the interface hierarchy, the MAX3386EEUP+ is a multi-driver, multi-receiver line-interface device designed for point-to-point serial links requiring electrostatic-discharge protection. Key features include three RS-232 drivers, two RS-232 receivers, a nominal 3V supply, and enhanced ESD protection of ±25 kV. The device targets EIA/TIA-232 and V.28/V.24 communications while emphasizing low power requirements and high data-rate capability. Its 20-pin TSSOP package supports compact surface-mount PCB construction without requiring external driver circuitry for each unidirectional RS-232 link. The MAX3386EEUP+ family provides a practical bridge between a modern microcontroller UART and a legacy RS-232 port. The three transmitters support multiple outputs, while two receivers can monitor two incoming signals or implement a hardware handshake arrangement. The ±25 kV ESD rating increases robustness at exposed connector interfaces, although board-level routing and grounding remain essential for dependable operation. Typical applications include personal digital assistants, cellular phones, portable instrumentation, barcode readers, industrial controls, and service or diagnostic equipment. It is particularly useful where a compact PCB requires several RS-232 signals but the system power supply operates near 3V. The interface supports point-to-point links rather than multidrop RS-232 networks. When designing the circuit, account for RS-232's unbalanced voltage signaling and use a suitable protection network at any externally accessible connector. Keep the transceiver and its charge-pump components away from sensitive analog areas, and follow the Analog Devices pin-description table when assigning connector and logic signals. Confirm the exact data rate, supply range, and operating temperature limits against the manufacturer datasheet before release. This page combines the manufacturer's interface description, package information, drop-in candidates, application guidance, and design considerations to support faster component evaluation and sourcing decisions.

Permintaan RFG Kontak
MAX3386EIDW - 3/2 RS-232 Transceiver | Texas Instruments
MAX3386EIDW

MAX3386EIDW - 3/2 RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3386EIDW is a 3-driver, 2-receiver RS-232 transceiver with a split supply pin for the logic side, a 20-SOIC package, and enhanced ESD protection rated at ±25 kV on the RIN inputs and DOUT outputs. It is designed for mixed-voltage systems in which the transceiver logic side requires a separate supply from the RS-232 side. An RS-232 transceiver is an interface IC that bridges a digital logic system and an RS-232 serial link. In the transmit direction, drivers convert logic-level signals into RS-232 levels; in the receive direction, receivers convert RS-232 inputs into compatible logic levels. The MAX3386E belongs to the interface IC hierarchy and supports bidirectional serial connectivity between embedded equipment and external data ports. The MAX3386EIDW provides three transmit drivers and two receive inputs, allowing one logic-side connection to serve multiple RS-232 lines. Its split VL supply arrangement supports mixed-voltage logic systems by allowing the logic-side supply to be selected independently from the transceiver’s other supply connections. Enhanced input and output ESD protection improves robustness against electrostatic discharge encountered during normal handling, cable connection, and industrial environments. The MAX3386EIDW is identified in the manufacturer documentation as the MAX3386E RS-232 transceiver with split supply pin for logic side. It is offered in a 20-SOIC package measuring 0.295 inches, or 7.50 mm, in body width. The E suffix denotes enhanced ESD protection, while the exact operating-temperature grade and ordering suffix details should be confirmed in the manufacturer datasheet before production release. Typical uses include industrial control links, point-of-sale equipment, serial adapters, instrumentation, and embedded systems that exchange data through RS-232 ports. The three-driver and two-receiver arrangement can support multiple signal directions on one board, while the split logic-side supply can simplify interfacing with modern low-voltage processors. Any replacement must preserve the exact pinout, supply arrangement, logic levels, and ESD requirements of the original PCB. For PCB design, keep RS-232 driver and receiver routes away from sensitive analog signals, use a solid ground reference, and place protection and bypass components close to their associated pins. Because this part is listed as obsolete by one distributor, new production designs should confirm lifecycle status and obtain an approved source before committing to a long-term bill of materials. This page combines lifecycle and package information, verified pricing treatment, drop-in replacement evaluation, and practical design guidance to support faster component selection and board-level risk assessment.

Permintaan RFG Kontak
MAX3386EIPW - 3V RS-232 Transceiver | Texas Instruments
MAX3386EIPW

MAX3386EIPW - 3V RS-232 Transceiver | Texas Instruments

Texas Instruments MAX3386EIPW is a 3V-to-5.5V RS-232 line driver and receiver capable of 250kbps operation, packaged in a 20-pin TSSOP. It combines three drivers, two receivers, a split logic-side supply connection, and enhanced IEC 61000-4-2 ESD protection rated to ±15kV on receiver inputs and driver outputs. An RS-232 transceiver is an interface IC that converts between digital logic-level signals and the bipolar voltage levels used by RS-232 equipment. In the product hierarchy, it belongs to the transceiver class of interface ICs, where line drivers transmit logic signals onto the cable and line receivers reconstruct valid logic signals from the cable. The MAX3386EIPW therefore connects low-voltage digital systems to external RS-232 ports while providing the voltage translation and electrostatic-discharge protection required at exposed connectors. The MAX3386E family supports operation from 3V to 5.5V, allowing its logic-side supply to match 3.3V or 5V systems. The separate VL pin improves compatibility with mixed-voltage systems by supplying the receiver and driver interface at the desired logic level. Its 250kbps maximum data rate is suitable for moderate-speed serial links, while three drivers and two receivers support asymmetric full-duplex connections. The 20-pin TSSOP also supports compact surface-mount PCB layouts. This device does not include the integrated charge-pump capacitors found in some RS-232 transceivers. Its split-supply architecture requires the external supply arrangements specified by the manufacturer datasheet, and the logic-side supply level must be selected to match the connected digital circuitry. This makes the device particularly appropriate when a controlled logic-side voltage is preferred over a single fixed internal supply arrangement. Typical uses include industrial control equipment, test and measurement instruments, data-acquisition systems, POS terminals, and embedded serial-port interfaces. In an industrial sensor interface, the MAX3386EIPW can translate between a 3.3V controller and a ±12V RS-232 bus while the ±15kV IEC ESD protection helps reduce connector-borne discharge damage. The interface should still be paired with suitable board-level grounding and enclosure practices. When laying out the PCB, place the device near the protected RS-232 connector and route driver and receiver traces away from sensitive analog or high-speed digital signals. Confirm the logic-side voltage, external capacitor requirements, and input slew behavior against the manufacturer datasheet before release. Validate the assembled interface for the required cable length, ground-reference arrangement, and system ESD level. This page combines the manufacturer family specifications, package information, lifecycle indication, verified drop-in cross-reference information, and practical interface-design guidance to support component selection and PCB planning.

Permintaan RFG Kontak
MAX3387ECUG+ - 3V 250kbps RS-232 Transceiver | Analog Devices
MAX3387ECUG+

MAX3387ECUG+ - 3V 250kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3387ECUG+ is a 3V-powered EIA/TIA-232 and V.28/V.24 communications transceiver with three transmitters, three receivers, data rates up to 250 kbps, enhanced ESD protection, and a 24-pin TSSOP package. It operates from a 3V to 5.5V supply and uses a dual charge pump with four 0.1uF capacitors for operation at 3.3V. An RS-232 transceiver is an interface IC that converts between logic-level signals and the voltage-defined bipolar signals used by RS-232 equipment. It belongs to the transceiver and line-driver/receiver hierarchy within interface ICs, bridging portable processors, cellular equipment, industrial controllers, and legacy serial ports while adding level conversion and electrostatic-discharge protection. The MAX3387E family provides three driver channels and three receiver channels, allowing three RS-232 links to be implemented in a compact design. Its low-dropout transmitter output stage is intended to preserve compliant RS-232 output levels with a supply as high as 5.5V. The manufacturer describes the device for low-power requirements, high data-rate capability, and enhanced ESD protection, with stated ±15kV protection for the MAX3387ECUG+. Its dual charge-pump architecture generates the positive and negative transmitter voltages required by RS-232 while operating from a single low-voltage supply. Four small 0.1uF charge-pump capacitors are sufficient for 3.3V operation according to the manufacturer documentation. The AutoShutdown Plus feature is intended to reduce power consumption when the interface is not active, making the part suitable for battery-powered and portable systems. Typical applications include RS-232 links in PDAs, cellular phones, data acquisition equipment, industrial controllers, point-of-sale terminals, and portable diagnostic instruments. The three-transmitter and three-receiver organization is useful where a board must expose multiple serial channels while conserving space and avoiding separate level-conversion ICs. Design should place the charge-pump capacitors close to their designated pins and route each RS-232 driver output with controlled return-path geometry. External protection may still be required for long cables or severe industrial environments, and system designers should confirm logic levels, shutdown behavior, receiver enable timing, and line-driver loading against their system requirements. This page organizes the principal electrical characteristics, package information, verified sourcing references, compatible family options, and practical interface-design considerations into a consolidated guide for engineers evaluating the MAX3387ECUG+.

Permintaan RFG Kontak
MAX3387ECUG+T - 250kbps RS-232 Interface | Analog Devices
MAX3387ECUG+T

MAX3387ECUG+T - 250kbps RS-232 Interface | Analog Devices

The Analog Devices MAX3387ECUG+T is a 3 V powered, 3-driver/3-receiver RS-232 communications interface operating at up to 250 kbps in a 24-pin TSSOP package. It supports supply voltages from 3 V to 5.5 V, provides enhanced electrostatic-discharge protection of ±15 kV, and uses a dual charge-pump architecture with four 0.1 µF capacitors. An RS-232 transceiver is an interface IC that converts logic-level signals into RS-232 bipolar levels and converts received RS-232 levels back into CMOS-compatible logic. The RS-232 interface belongs to the communications-interface hierarchy, where it bridges portable equipment, industrial controllers, point-of-sale terminals, and other data links that require the electrical characteristics defined by EIA/TIA-232 and V.28/V.24. The MAX3387ECUG+T combines three transmitters and three receivers in one device, reducing board area in multi-port RS-232 equipment. Key features include a maximum data rate of 250 kbps, operation from a 3 V to 5.5 V supply, and ±15 kV ESD protection. The low-dropout transmitter output stage supports true RS-232 operation from a +5.5 V supply, while the dual charge pump generates the bipolar voltage required for compliant signal levels. A low-power design makes the interface appropriate for battery-operated products, including personal digital assistants and cellular phones. The device integrates three independent transmit channels and three independent receive channels, allowing one package to terminate a multi-drop or multi-port RS-232 connection. Its 250 kbps capability exceeds the speed needed by many legacy serial peripherals and supports communication links requiring more throughput than conventional low-speed RS-232 ports. The internal charge-pump arrangement reduces the external support circuitry to four small 0.1 µF capacitors. Typical applications include RS-232 links in personal digital assistants, mobile and cellular phones, portable test equipment, point-of-sale systems, industrial control panels, and embedded serial-port interfaces. The combination of three transmitters, three receivers, 3 V operation, and enhanced ESD protection is particularly useful where several serial endpoints share a compact circuit board. When laying out the design, place the four 0.1 µF charge-pump capacitors close to their specified pins, keep the RS-232 connector and signal traces physically separated from sensitive logic, and provide an appropriate return path for the bipolar interface. Confirm the logic levels, supply range, and shutdown behavior in the manufacturer datasheet before finalizing a new board. This page consolidates the MAX3387ECUG+T interface specifications, verified drop-in candidate, application guidance, and design notes into an engineering-focused reference that supports component selection, schematic review, and PCB planning beyond a basic distributor listing.

Permintaan RFG Kontak
MAX3387EEUG+ - 3V RS-232 Transceiver, 250kbps, ±15kV ESD | Maxim
MAX3387EEUG+

MAX3387EEUG+ - 3V RS-232 Transceiver, 250kbps, ±15kV ESD | Maxim

The Analog Devices (formerly Maxim Integrated) MAX3387EEUG+ is a 3V-powered, ±15kV ESD-protected RS-232 transceiver with three drivers and three receivers, housed in a 24-pin TSSOP package. It supports data rates up to 250 kbps, complies with EIA/TIA-232 and V.28/V.24 standards, and integrates a charge pump to generate the ±5.5V RS-232 levels from a single 3.0V to 5.5V supply. The 'E' suffix indicates the enhanced AutoShutdown Plus mode that reduces supply current to 1 µA typical when no valid cable is connected. An RS-232 transceiver is a line driver/receiver IC that translates between TTL/CMOS logic levels (0-3.3V) on the UART side and the bipolar ±5V to ±15V signal levels required by the legacy RS-232 standard on the cable side. RS-232 transceivers sit at the physical layer of serial communication and remain ubiquitous in point-of-sale terminals, industrial equipment, legacy PC peripherals, and embedded debug ports despite being superseded by USB and Ethernet in many consumer applications. Key features include ±15kV ESD protection on the RS-232 bus pins (IEC 61000-4-2 Air Gap), an integrated dual charge pump requiring only four small 0.1µF external capacitors, and an AutoShutdown Plus mode that automatically disables the charge pump and receivers when the cable is disconnected. The device operates from a single 3.0V to 5.5V supply and includes three active-low INVALID outputs for system monitoring. The MAX3387EEUG+ uses a proprietary low-power charge pump architecture combined with Maxim's AutoShutdown Plus logic, achieving 1 µA typical supply current in shutdown while still supporting 250 kbps data rates. The dual charge pump generates +7V and -7V from the input rail using only flying capacitors, eliminating the need for a ±12V system supply. Typical applications include PDA and cell phone data cables, palmtop computers, battery-powered equipment, embedded industrial controllers, GPS receivers, and point-of-sale (POS) terminals. Its single-supply 3V operation makes it ideal for portable, battery-powered designs where ±12V rails are unavailable. When designing with this device, place the four charge-pump capacitors (typically 0.1µF ceramic) as close as possible to the C1+, C1-, C2+, and V+ pins. Ensure the ESD-protected bus traces are kept short and routed away from sensitive analog signals. For systems that can tolerate a slightly larger TSSOP, the MAX3387ECUG+ offers a commercial 0°C to +70°C temperature range as an alternative. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone.

Permintaan RFG Kontak
MAX3387EEUG+T - 3V RS-232 Transceiver | Analog Devices
MAX3387EEUG+T

MAX3387EEUG+T - 3V RS-232 Transceiver | Analog Devices

The Analog Devices MAX3387EEUG+T is a 3V-powered RS-232 communications interface IC with three transmitters and three receivers, 250kbps data-rate capability, and enhanced electrostatic-discharge protection. It is packaged in a 24-pin TSSOP and can operate from a 3V to 5.5V supply. An RS-232 transceiver is a semiconductor interface that converts logic-level signals into RS-232 voltage levels and converts received RS-232 signals back into digital logic levels. The MAX3387E belongs to the interface IC hierarchy, where it bridges a host controller and external data-terminal equipment through EIA/TIA-232 links. Its dual charge-pump design supports true RS-232 operation from a low-voltage supply without a separate negative supply rail. The device provides three driver channels and three receiver channels, allowing two RS-232 ports or several individual data paths to be implemented in one package. A proprietary low-dropout transmitter output stage enables operation from supplies up to 5.5V while maintaining compliant output levels. The manufacturer also identifies enhanced ESD protection, with the product listing specifying 15kV protection. At data rates up to 250kbps, the MAX3387EEUG+T is appropriate for data links that require more throughput than a conventional low-speed serial port. Its internal charge pumps require four 0.1uF capacitors for operation from 3.3V. This compact approach eliminates the external negative-voltage supply circuitry commonly associated with older RS-232 implementations, reducing board area and simplifying system power design. Typical applications include industrial control terminals, data-acquisition equipment, point-of-sale terminals, configuration interfaces, portable diagnostic equipment, and embedded serial adapters. Multiple driver and receiver channels also suit designs that combine console, firmware-update, and peripheral-control links while limiting the number of interface ICs on the board. PCB design should keep the charge-pump capacitors close to their associated pins and provide adequate return paths for high-speed transitions. Designers should also distinguish powered logic-side signals from externally accessible RS-232 lines, route cables to reduce ESD exposure, and verify signal polarity and logic levels on every connected channel before production release. This page combines the manufacturer interface description with verified ordering information, a focused drop-in cross-reference, and practical implementation guidance. It is intended to help engineers identify the correct package variant, compare compatible devices, and implement a compact, low-power RS-232 interface without overlooking supply, ESD, or signal-integrity constraints.

Permintaan RFG Kontak
MAX3388ECUG+ - 2.5V 460kbps RS-232 Transceiver | Maxim
MAX3388ECUG+

MAX3388ECUG+ - 2.5V 460kbps RS-232 Transceiver | Maxim

The Maxim Integrated MAX3388ECUG+ is a 3-driver/2-receiver RS-232 transceiver designed for 2.5V-powered communications equipment. Rated for data rates up to 460kbps and enhanced electrostatic-discharge protection up to 15kV, the device is housed in a 24-pin TSSOP package. It implements a full RS-232 interface for portable and embedded systems that require bidirectional serial communication. An RS-232 transceiver is an interface integrated circuit that converts between complementary TTL/CMOS logic levels and the bipolar voltage levels used by RS-232 equipment. The MAX3388ECUG+ sits within the interface IC hierarchy as an EIA/TIA-232 communications transceiver, combining line drivers and receivers in one package. Its 2.5V supply operation is particularly useful for reducing the power burden in battery-powered phones, personal digital assistants, and other mobile equipment. The principal features include three transmit drivers, two receive inputs, operation from a single 2.5V supply, support for data rates as high as 460kbps, and enhanced ESD protection up to 15kV. These characteristics make the device suitable for portable equipment that must communicate with RS-232 peripherals while preserving a compact, low-voltage power architecture. The device's multi-driver arrangement allows several unidirectional RS-232 outputs alongside two receive channels, enabling asymmetric links such as command, control, status, and diagnostic paths. Its 24-pin TSSOP package provides a conventional surface-mount footprint that can simplify board layout relative to discrete driver and receiver implementations. Low-voltage operation also allows the IC to share a compact portable power rail without requiring a separate 5V interface supply. Typical applications include serial adapters for personal digital assistants, communication ports in cellular telephones, data acquisition equipment, industrial controllers, and portable test instruments. It is particularly appropriate where an equipment designer needs a compact EIA/TIA-232 interface, multiple logic-level outputs, receive inputs, and stronger ESD tolerance on externally accessible serial lines. When laying out a design, keep the transceiver's logic-side traces away from the exposed RS-232 connector and route driver outputs as short, direct connections to the interface pins. Confirm the connector's signal polarity and the logic-level relationship of the connected UART before using each driver and receiver, because the RS-232 electrical standard is not directly compatible with ordinary CMOS signals. This page combines the device's interface functions, RS-232 operating characteristics, verified package information, sourcing guidance, and application-focused design guidance to support faster component selection and implementation. For a replacement, verify the exact suffix, pin assignment, electrical ratings, and system-level RS-232 polarity before production release.

Permintaan RFG Kontak
MAX3388ECUG+T - 2.5V 460kbps RS-232 Transceiver | Analog Devices
MAX3388ECUG+T

MAX3388ECUG+T - 2.5V 460kbps RS-232 Transceiver | Analog Devices

Analog Devices MAX3388ECUG+T is a 2.5V-powered RS-232 transceiver with three drivers, two receivers, 460kbps data-rate capability, and enhanced 15kV electrostatic-discharge protection in a 24-TSSOP package. It is designed for portable systems that require a low-voltage, low-power communications interface. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and an RS-232 link. The MAX3388E family implements the electrical drivers and receivers required by EIA/TIA-232, also associated with V.28 and V.24 communications interfaces. Within the electronic-component hierarchy, it is a transceiver, interface IC, communications semiconductor, and low-voltage serial-interface device. Three RS-232 drivers support multiple outbound channels, while two receivers support two inbound channels. The 2.5V supply allows the device to operate from a low-voltage system rail without requiring a conventional 5V RS-232 supply. Its 460kbps maximum data rate makes it suitable for equipment whose serial links must transfer commands, configuration data, status information, or short data packets quickly. Enhanced electrostatic-discharge protection rated to 15kV is a major feature for connectors that can be touched during installation or connected to external cables. The protection is especially relevant to PDAs, mobile equipment, and industrial control systems where an RS-232 port may be exposed to electrostatic discharge. The manufacturer describes the MAX3388E and MAX3389E as low-power, high-data-rate communications interfaces with enhanced ESD protection. Typical uses include personal digital assistants, cellular phones, point-of-sale equipment, data acquisition units, industrial controllers, and service interfaces. The three-driver, two-receiver arrangement suits asymmetric links in which a controller sends commands to multiple peripherals while receiving responses from up to two devices. A system using fewer channels can disable unused drivers and receivers according to the device interface guidance. Designers should account for RS-232 level translation at the connector, protect the supply rail, and verify that signal rates and cable characteristics suit the intended link. Decoupling capacitors should be placed close to the supply and ground pins, while external driver and receiver networks should follow the manufacturer application guidance. The 24-TSSOP package also requires a PCB footprint consistent with its 0.65mm pitch. This product page combines manufacturer-interface details, package identification, ESD and data-rate specifications, drop-in alternatives, application guidance, and PCB-focused design considerations to support component selection and implementation. It is intended to help engineers evaluate electrical compatibility and make a board-level replacement decision without relying on family-level descriptions alone.

Permintaan RFG Kontak
MAX3388EEUG+ - 2.5V ESD-Protected RS-232 | Maxim
MAX3388EEUG+

MAX3388EEUG+ - 2.5V ESD-Protected RS-232 | Maxim

The Maxim Integrated MAX3388EEUG+ is a 2.5V-powered, ±15kV ESD-protected RS-232 interface transceiver with three transmitters and two receivers in a 24-pin TSSOP package. It combines three driver channels and two receiver channels on one device, making it suitable for compact equipment that needs bidirectional serial communication but does not require the same number of transmit and receive lines. An RS-232 transceiver is a semiconductor interface device that converts logic-level signals into RS-232 line levels and converts incoming RS-232 signals back into CMOS-compatible logic. The MAX3388EEUG+ supports EIA/TIA-232 and V.28/V.24 communications interfaces. Its low 2.5V supply design is particularly useful for portable equipment, personal digital assistants, and cellular-phone systems where power consumption and circuit area are important constraints. The three transmitter and two receiver arrangement gives the device a 3/2 channel configuration. Additional standout characteristics include ±15kV ESD protection and operation from a 2.5V supply. These features help protect the interface pins when cables are connected, removed, or exposed to electrostatic discharge during handling. The MAX3388E family is also identified as providing high data-rate capability and low power requirements. The 24-TSSOP package provides a surface-mount implementation with gull-wing terminals and a rectangular body. The industrial temperature grade makes the MAX3388EEUG+ appropriate for equipment operating across an industrial environment. Its three transmitters also allow a single package to support multiple outgoing RS-232 lines, reducing the number of interface components required on a board. Typical applications include handheld and portable communication equipment, personal digital assistants, cellular-phone accessories, point-of-sale terminals, diagnostic equipment, and embedded serial-port systems. The two receiver channels can support two incoming signals while the three transmitter channels serve outbound links or status and control lines. Designers should place required charge-pump and interface capacitors according to the manufacturer application circuit, maintain the specified supply range, and provide direct protection and layout measures for exposed cable connectors. The 24-pin TSSOP footprint is also sensitive to assembly and soldering practices, so the recommended land pattern and reflow profile should be followed. This page organizes the RS-232 channel configuration, supply voltage, ESD rating, package information, drop-in replacement analysis, comparison parameters, and practical interface-layout guidance into one engineering-focused resource for component selection and PCB design.

Permintaan RFG Kontak
MAX3388EEUG+T - 2.5V ESD-Protected RS-232 Transceiver | Maxim
MAX3388EEUG+T

MAX3388EEUG+T - 2.5V ESD-Protected RS-232 Transceiver | Maxim

The Maxim Integrated MAX3388EEUG+T is a 2.5V-powered, ±15kV ESD-protected RS-232 transceiver designed for portable data and communications equipment. The device combines three drivers and two receivers in a 24-TSSOP package, operates from a single 2.5V supply, and supports data rates up to 460kbps. Its combination of low power requirements, high data-rate capability, and enhanced electrostatic-discharge protection makes it appropriate for RS-232 links in PDAs, cellular phones, and other compact portable systems. An RS-232 transceiver is an interface IC that converts between digital logic-level signals and RS-232 line-level signals. The transmitter section drives logic-level data onto a serial interface, while the receiver section converts incoming RS-232 signals back into logic-compatible data. As a 3/2 transceiver, the MAX3388EEUG+T provides three transmit channels and two receive channels in one package, reducing component count and simplifying portable serial-interface designs. The main advantages of this MAX3388E-family device include its low 2.5V operating supply, data-rate capability of 460kbps, and ±15kV ESD protection. The low supply voltage supports designs in which conserving battery energy and reducing overall system voltage are priorities. ESD protection is particularly valuable in handheld equipment because exposed serial connectors are susceptible to electrostatic discharge during use, handling, and connection to external accessories. The MAX3388EEUG+T belongs to the MAX3388E and MAX3389E interface family, which is designed around EIA/TIA-232 and V.28/V.24 communications interfaces. Both families share a low-power 2.5V architecture, high data-rate operation, and enhanced ESD protection. The MAX3388E provides two receivers, making it appropriate for designs that need more driver channels than receiver channels. Typical uses include RS-232 connections in PDAs and cellular phones, portable data acquisition equipment, and embedded systems that exchange serial data with accessories or service equipment. In these applications, the device can bridge a low-voltage controller to an external RS-232 port while maintaining a compact 24-pin surface-mount footprint. Board designers should still provide suitable connector protection and route the interface according to the manufacturer's application guidance. A key design consideration is the distinction between the low-voltage logic side and the RS-232 side. Decoupling, grounding, and connector placement can affect signal integrity and ESD performance even when the IC itself includes internal protection. Use the pin-description and application-circuit information in the manufacturer datasheet when assigning input, output, enable, ground, and supply connections. This product page combines exact package and interface information with practical drop-in cross-reference options, application guidance, and design considerations. It supports faster component identification while preserving the distinction between verified electrical facts and engineering guidance that still requires circuit-level validation.

Permintaan RFG Kontak
MAX3389ECUG+ - 2.5V 3/2 RS-232 Transceiver | ADI
MAX3389ECUG+

MAX3389ECUG+ - 2.5V 3/2 RS-232 Transceiver | ADI

Analog Devices MAX3389ECUG+ is a 3-driver, 2-receiver RS-232 transceiver designed for low-voltage serial-interface systems. It operates from a 2.5V supply, supports the EIA/TIA-232 and V.28/V.24 communication standards, provides ±15kV ESD protection on its external interface pins, and is packaged in a 24-pin TSSOP. The device targets portable and mobile equipment requiring a compact, low-power RS-232 interface. An RS-232 transceiver is an interface IC that converts logic-level signals between a host or controller and a cable-based RS-232 link. The MAX3389ECUG+ combines three transmit channels with two receive channels in one package. This mixed 3/2 configuration allows one controller to command three external targets while receiving status or data from two of them, reducing the number of separate interface components required in portable equipment. The primary electrical features are the 2.5V operating supply, a specified 2.35V to 3V transceiver supply range, and ±15kV ESD protection. These characteristics make the device suitable for systems in which connector exposure, limited battery energy, and restricted board area are important design constraints. The enhanced ESD protection helps improve interface robustness when users connect external cables to personal digital assistants, mobile phones, and other handheld communications products. The MAX3389 family implements the electrical signaling required by EIA/TIA-232 and V.28/V.24 interfaces. Driver channels convert TTL-compatible command signals into RS-232 levels, while receiver channels recover RS-232 data as logic-level signals. The integrated multi-channel arrangement also reduces the number of package outlines and PCB land patterns that a design team otherwise needs to manage for several independent serial ports. Typical uses include personal digital assistant connectivity, mobile phone accessories, handheld test equipment, point-of-sale terminals, and compact industrial controllers. The low 2.5V supply requirement allows the interface to operate alongside low-voltage logic, while the TSSOP-24 package supports compact board layouts. Product qualification, ordering, and lifecycle requests can be handled through the Request a Quote form on this page. The primary design consideration is external-signal handling. Although the device has enhanced ESD protection, the board still needs a suitable return path, controlled cable routing, and connector placement that minimizes ESD exposure. Power and signal integrity should be evaluated together because the RS-232 drivers and receivers operate at a higher voltage domain than many modern low-voltage host controllers. This page combines the identified electrical ratings, package information, application context, comparison parameters, and practical design guidance into one engineering reference. It also distinguishes exact drop-in candidates from related interface families and highlights which characteristics must still be confirmed in the manufacturer datasheet before a substitution is released to production.

Permintaan RFG Kontak
MAX3389ECUG+T - 2.5V RS-232 Transceiver | Analog Devices
MAX3389ECUG+T

MAX3389ECUG+T - 2.5V RS-232 Transceiver | Analog Devices

The Analog Devices MAX3389ECUG+T is a 2.5V-powered, 3/2 RS-232 transceiver with two drivers, two receivers, 15kV ESD protection, and a 24-pin TSSOP package. Designed for low-power portable equipment, it combines an EIA/TIA-232 interface with enhanced electrostatic-discharge protection. Its 2.5V supply operation suits PDAs, cellular phones, data terminals, and other compact systems where both circuit-board area and operating power are constrained. An RS-232 transceiver is an interface IC that translates logic-level signals between a host or controller and an RS-232 link. A driver converts TTL or CMOS logic into RS-232 levels, while a receiver converts incoming RS-232 signals back into logic levels. As a member of the voltage-regulator and power-management ecosystem, this interface IC connects low-voltage digital circuitry to the voltage and polarity characteristics of an RS-232 communications port. The MAX3389ECUG+T provides 15kV ESD protection, a 2.5V supply, low power requirements, and high data-rate capability. Its three-driver, two-receiver configuration supports one communications channel plus one additional transmit function, making it practical for devices that need more than one RS-232 output but fewer than three active receivers. The integrated protection reduces the need for separate external protection networks on exposed connector-facing pins. The MAX3389E belongs to the MAX3388E and MAX3389E family of 2.5V-powered EIA/TIA-232 and V.28/V.24 communications interfaces. The MAX3389E configuration contains two drivers and two receivers. Because the interface operates from a low supply voltage, careful consideration of input levels, bypass capacitors, connector exposure, and grounding remains necessary when connecting it to legacy RS-232 equipment. Typical uses include RS-232 ports in PDAs, cellular phones, portable instruments, point-of-sale terminals, and embedded communications equipment. The part is especially relevant where a 5V interface would add unnecessary power, where a 24-pin TSSOP footprint fits an existing layout, or where exposed RS-232 lines require stronger ESD protection. It can also support multiple wired communications functions when a system does not need every driver and receiver active simultaneously. Place the MAX3389ECUG+T close to the RS-232 connector when practical, route each driver and receiver trace away from sensitive analog circuitry, and connect the interface ground to the system ground according to the board-level return-current plan. The 2.5V supply should be bypassed locally, while any external protection still needed for severe industrial transients should be selected for the connector environment rather than assumed to be covered by the IC. This product data combines the MAX3389ECUG+T configuration, directly documented interface characteristics, verified package information, and a validated same-footprint replacement path. It also adds application-focused design guidance intended to make RS-232 integration more reliable in portable and embedded systems.

Permintaan RFG Kontak