Produk (44.000+)

MK11DX256VMC5 - 50MHz Cortex-M4 Kinetis K11 MCU | NXP
MK11DX256VMC5

MK11DX256VMC5 - 50MHz Cortex-M4 Kinetis K11 MCU | NXP

The NXP (Freescale) MK11DX256VMC5 is a 32-bit ARM Cortex-M4 Kinetis K11 microcontroller operating at up to 50 MHz, with 256KB flash memory, 32KB SRAM, and a 121-ball MAPBGA (8x8 mm) package. A 32-bit microcontroller is a single-chip computer that integrates a processor core, memory, and peripherals on one die, sitting at the device level of the embedded systems hierarchy (semiconductor -> MCU -> ARM Cortex-M microcontroller -> Kinetis K-series). The Kinetis K11 family belongs to NXP's Kinetis portfolio built on the Arm Cortex-M4 core, optimized for cost-sensitive applications requiring low power, security encryption, and tamper detection. Key features include the 50 MHz Cortex-M4 core with DSP instructions and single-cycle MAC, 256KB (256K x 8) on-chip flash, a hardware anti-tamper security subsystem (the 'DryIce' tamper-detect feature noted by distributors), operation from 1.8V, 2.5V, or 3.3V supplies, and an industrial temperature range of -40C to +105C per distributor specifications. Technically, the K11 sub-family combines the Cortex-M4 pipeline with NXP's mixed-signal peripheral set typical of Kinetis K-series devices, making it suitable where both processing headroom and security features are needed. The MAPBGA ball-grid package provides a compact 8x8 mm footprint for space-constrained designs, though rework requires BGA capability. Typical applications include secure industrial control nodes, tamper-aware metering and payment terminals, portable battery-powered instruments, and embedded systems that benefit from the Cortex-M4 DSP capability. Design consideration: verify the exact memory-map and peripheral configuration against the manufacturer datasheet, since the K11 family shares silicon across 256KB and larger variants. This page synthesizes distributor pricing, stock status, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MK12DX128VLF5557 - 50MHz Cortex-M4 MCU 128KB Flash | NXP
MK12DX128VLF5557

MK12DX128VLF5557 - 50MHz Cortex-M4 MCU 128KB Flash | NXP

The NXP MK12DX128VLF5557 is a Kinetis K12-series ARM Cortex-M4 microcontroller built on a 32-bit single-core architecture running at 50 MHz, integrating 128 KB of Flash and packaged in a 48-pin LQFP (7x7 mm) form factor. The part is supported by Rochester Electronics as an authorized channel for legacy Kinetis inventory and ships from major distributors including DigiKey, JLCPCB, and Origin-IC. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (Flash/RAM), peripherals, and I/O into one device, sitting at the taxonomy level of: microcontroller -> microprocessor -> integrated circuit -> semiconductor. Kinetis K-series MCUs are general-purpose Cortex-M devices aimed at industrial and consumer embedded designs, where deterministic real-time control, low power, and rich analog integration matter most. Key features of the MK12DX128VLF5557 include the ARM Cortex-M4 core with DSP instructions, 128 KB program Flash for application code, a 48-pin LQFP package supporting surface-mount assembly and standard hand-solder rework, and Freescale/NXP legacy Kinetis tooling. The 50 MHz CPU clock is suitable for sensor fusion, motor control loops, and human-machine interface (HMI) applications, while the Flash density supports mid-sized embedded applications with Bluetooth stacks or graphics libraries. Architecturally, the K12 sub-family uses the Cortex-M4 with a 3-stage pipeline, single-precision FPU, and Memory Protection Unit (MPU), paired with Kinetis peripheral IP including FlexTimer, ADC, and low-power modes. The 48-LQFP (7x7) package offers a manageable pin pitch for hand prototyping while exposing the full peripheral set. Typical applications include industrial sensor nodes, low-end motor control, building automation, and consumer HMI panels. The K12 family is also seen in smart metering and access-control designs where 128 KB Flash fits the firmware image. When designing with this part, verify the specific peripheral mix against your firmware's I/O requirements (UART, I2C, SPI, timers, ADC channels) and confirm the 48-LQFP footprint is acceptable for the mechanical enclosure. Note that some K12 Kinetis parts have transitioned through NXP's product lifecycle; sourcing from authorized distributors like Rochester Electronics mitigates supply-chain risk. This page synthesizes distributor pricing, authorized-channel availability, and pin-compatible Kinetis alternatives not found in the manufacturer datasheet alone, helping engineers evaluate substitution paths for legacy Kinetis K12 designs.

Permintaan RFG Kontak
MK12DX128VMC5 - Kinetis K10 Cortex-M4 MCU 50MHz | NXP
MK12DX128VMC5

MK12DX128VMC5 - Kinetis K10 Cortex-M4 MCU 50MHz | NXP

The NXP MK12DX128VMC5 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K10 (K12-marketed) family, operating at 50 MHz with 128 KB of on-chip flash memory and 121-ball MAPBGA (8x8 mm) packaging, with 60 GPIO pins and 3.3V supply operation. A microcontroller unit (MCU) is a single integrated circuit that combines a processor core, program memory (flash), data memory (SRAM), and a rich set of peripherals into one chip. Within the power-management hierarchy of embedded systems, the MCU sits at the top of the control chain, orchestrating sensors, actuators, and communication interfaces. The Kinetis K series is NXP's performance-oriented MCU family built on the ARM Cortex-M core architecture. Key features of the MK12DX128VMC5 include the ARM Cortex-M4 core with DSP instructions and single-cycle MAC for efficient digital signal processing, 128 KB (128K x 8) of program flash, and multiple serial connectivity options: I2C, IrDA, SPI, and UART/USART. Integrated peripherals include DMA, I2S for digital audio, low-voltage detection (LVD), power-on reset (POR), PWM channels, and a watchdog timer (WDT). Technically, the device is fabricated on NXP's flash microcontroller process and runs the Cortex-M4 pipeline at 50 MHz, delivering roughly 50 DMIPS-class throughput suitable for motor control, digital power, and sensing applications. The 121-ball MAPBGA in an 8x8 mm footprint provides high I/O density (60 usable GPIO) in a compact surface-mount form factor for space-constrained designs. Typical applications include industrial control and automation, consumer appliances, portable instruments, and embedded sensing nodes where a 32-bit MCU with DMA and PWM peripherals at low cost is required. When designing with this part, budget the 3.3V supply carefully and decouple all VDD/VSS ball pairs; BGA devices require attention to PCB fanout and reflow profiles. This page synthesizes distributor pricing context, same-family drop-in alternatives, and practical design notes beyond what the manufacturer datasheet provides.

Permintaan RFG Kontak
MK12DX256VLF5 - 50MHz Cortex-M4 Kinetis MCU, 256KB Flash | NXP
MK12DX256VLF5

MK12DX256VLF5 - 50MHz Cortex-M4 Kinetis MCU, 256KB Flash | NXP

The NXP Semiconductors MK12DX256VLF5 is a 32-bit ARM Cortex-M4 microcontroller from the Kinetis K12 sub-family, integrating 256KB of Flash and 32KB of SRAM in a 48-pin LQFP (7x7 mm) package. The Cortex-M4 core delivers up to 50 MHz of processing performance with hardware single-precision floating-point support, paired with a low-power peripheral set tuned for cost-sensitive, energy-conscious applications. What is a Kinetis microcontroller? The Kinetis family is NXP's line of ARM Cortex-M based microcontrollers (Kinetis -> ARM Cortex-M MCU -> microcontroller -> semiconductor). Kinetis parts are organized by sub-family (K10/K12/K20/K21/K60/K70), with K12 positioned as a low-power baseline MCU that adds DSP capability over the K10 while omitting the higher-end Ethernet/USB blocks of the K60 series. The MK12DX256VLF5 sits in the K12 tier as a balance of cost, performance, and peripheral integration. Key features of the MK12DX256VLF5 include 50 MHz Cortex-M4 core with FPU, 256KB program Flash, 32KB SRAM, 33 general-purpose I/O, and on-chip peripherals including DMA, I2S, LVD, POR, PWM, and a watchdog timer. The connectivity set covers I2C, IrDA, SPI, and UART/USART. The device operates across an extended industrial temperature range suitable for portable and embedded consumer designs. Architecturally, the MK12DX256VLF5 leverages Freescale/NXP's low-leakage process technology and features a flexible low-power peripheral architecture. The inclusion of an FPU accelerates DSP operations, while the 33 I/O pins and rich timer/PWM peripherals support mixed-signal sensing and motor-control tasks. The 48-LQFP footprint balances pin access with a compact PCB area, ideal for medium-density designs. Typical applications include portable consumer electronics, low-power sensor hubs, home appliances, human-machine interface (HMI) controllers, and small motor-driven peripherals. It also fits HVAC, smart metering, and industrial monitoring endpoints where a Cortex-M4 class DSP core simplifies sensor-fusion math. When designing with this device, ensure the JTAG/SWD debug interface is exposed for programming and field updates. The 48-LQFP package simplifies hand-prototyping and rework versus BGA alternatives, but thermal performance is constrained versus exposed-pad packages above 1W dissipation. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet.

Permintaan RFG Kontak
MK12DX256VLH5 - 50MHz Cortex-M4 MCU, 256KB Flash, 64-LQFP | NXP
MK12DX256VLH5

MK12DX256VLH5 - 50MHz Cortex-M4 MCU, 256KB Flash, 64-LQFP | NXP

The NXP MK12DX256VLH5 is a Kinetis K12 series 32-bit ARM Cortex-M4 microcontroller running at up to 50 MHz, integrating 256 KB of program flash and 32 KB of SRAM on-chip, housed in a 64-pin LQFP (10x10 mm) package. Operating from 1.71 V to 3.6 V across 1.8 V, 2.5 V, and 3.3 V rails, the part combines a Cortex-M4 core with DSP instructions and a single-precision FPU, plus an integrated USB 2.0 OTG controller, segment LCD driver, and 12-bit/16-bit mixed-signal analog peripherals aimed at cost-sensitive industrial and consumer applications. Kinetis K12 belongs to NXP's Kinetis microcontroller family of ARM Cortex-M based MCUs, sitting between the K10 (low-power) and K20 (high-performance, USB-capable) families. It inherits the Cortex-M4 instruction set with DSP extensions and FPU, ensuring broad ecosystem compatibility with the wider Kinetis K-series platform, including pin-compatible migration paths to the K22 family and software reuse through Kinetis SDK and Processor Expert tooling. Key features of the MK12DX256VLH5 include: 256 KB flash with 32 KB SRAM, segment LCD driver (up to 8x36 segments), USB 2.0 full-speed OTG with on-chip transceiver, two 16-bit ADCs (one 12-bit SAR ADC optional on derivatives), multiple timers including FTM/PIT/LPTMR, low-power run/wait/stop modes, and a wide -40 C to +105 C industrial operating temperature range, all in a 64-LQFP surface-mount package with a RoHS-compliant lead-free finish. The MK12DX256VLH5 uses the standard Kinetis Cortex-M4 core with 3-stage pipeline, single-precision FPU, and DSP instructions, paired with a 16-channel DMA, nested vector interrupt controller (NVIC), and memory protection unit. Program flash is ECC-protected and supports byte-level EEPROM emulation, and SRAM includes parity/ECC options on derivatives. The integrated USB 2.0 OTG controller includes on-chip FS transceiver and 5 V regulator pull-up, simplifying USB designs. Typical applications include industrial human-machine interfaces with LCD, USB peripherals and HID devices, building automation panels, electronic metering, portable medical devices, and consumer white goods with segment-LCD displays. The combination of Cortex-M4 DSP performance and segment-LCD drive makes the K12 family especially suited to instrument cluster and HVAC control panels. A key design consideration when selecting MK12DX256VLH5 is the 64-LQFP footprint versus higher-density MAPBGA alternatives; designers should evaluate whether 64-LQFP routing is sufficient. The segment-LCD voltage generation uses an internal charge pump, but pin count must be budgeted between analog, communication (UART/SPI/I2C), and LCD signals. This page synthesizes distributor pricing, drop-in alternatives, and practical design notes not found in the manufacturer datasheet alone, optimized to deliver decision-grade context for Kinetis K12 platform selection.

Permintaan RFG Kontak
MK2049-34SAI - 77.76MHz 3.3V VCXO PLL | Renesas
MK2049-34SAI

MK2049-34SAI - 77.76MHz 3.3V VCXO PLL | Renesas

The Renesas Electronics MK2049-34SAI is a 3.3 V communications clock VCXO PLL clock synthesizer with a maximum output frequency of 77.76 MHz, LVCMOS input and output interfaces, and a 20-pin SOIC package. It accepts multiple input frequencies and uses an 8 kHz clock reference to support controlled clock synthesis in communications equipment. A VCXO PLL clock synthesizer is a timing device that combines a voltage-controlled crystal oscillator with a phase-locked loop. In the broader semiconductor hierarchy, it belongs to clock and timing ICs, where a PLL synchronizes an adjustable output to a stable reference. This architecture allows a system to derive multiple or rational clock relationships while attenuating phase noise and reducing frequency variation. The MK2049-34SAI operates from a 3.15 V to 3.45 V supply, making it suitable for 3.3 V communications systems. Its listed LVCMOS interfaces support integration with digital logic, while the 77.76 MHz maximum frequency provides headroom for telecom transport, networking, and embedded communications equipment. The package is a 20-SOIC measuring 0.295 inches, or 7.50 mm, in width. The device is identified as a PLL clock synthesizer with one listed circuit and an input-to-output ratio of 1:3. The manufacturer datasheet also describes the MK2049-34A family as a dual phase-locked-loop device capable of frequency synthesis and jitter attenuation. These functions allow an external reference to establish the operating point while internal loop behavior controls the generated communication clock. Typical uses include line-card clocking, telecommunications equipment, network-interface timing, and other systems requiring a stable synthesized output from a low-frequency reference. In these applications, the 3.3 V operating range aligns with conventional communications logic, while LVCMOS signaling simplifies connection to digital clock buffers, processors, converters, and field-programmable logic. When designing the clock path, verify the reference frequency, output division or multiplication ratio, loop filtering, and external crystal requirements against the manufacturer datasheet. Keep the clock traces short and provide a clean return path, particularly when the generated signal drives high-speed digital circuitry. Decoupling and output loading also affect clock quality, so validate them against the intended operating conditions. This product page consolidates the verified electrical characteristics, package details, application guidance, sourcing paths, and engineering trade-offs for the MK2049-34SAI. It also explains where additional design data must be taken directly from the manufacturer datasheet, including the complete pin description and application-specific reference circuitry.

Permintaan RFG Kontak
MK2049-36SI - 3.3V PLL Clock Synthesizer | Renesas
MK2049-36SI

MK2049-36SI - 3.3V PLL Clock Synthesizer | Renesas

Renesas Electronics MK2049-36SI is a 3.3 V PLL-based communications clock synthesizer that accepts multiple input frequencies and generates T1, E1, T3, E3, OC3 and other communications clock frequencies. The device uses an 8 kHz reference clock, produces LVCMOS outputs, and supports frequencies up to 77.76 MHz. It is supplied in a 20-pin SOIC package. The 3.3 V supply requirement, phase-locked-loop architecture and communications-oriented output range make the MK2049-36SI suitable for line-card, transmission, switching and other telecommunications clocking systems. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies or divides a stable reference frequency while locking its internal oscillator to that reference. In the product hierarchy, a PLL synthesizer is a clock generator, a clock-and-timing IC and ultimately a semiconductor. Compared with a free-running oscillator, the phase-locked architecture allows multiple related output frequencies to share a common 8 kHz reference, reducing frequency drift between clocks and simplifying synchronization across a communications system. The MK2049-36 family provides one PLL-based clock-synthesis circuit with a maximum reported output frequency of 77.76 MHz. Its input and output signal format is LVCMOS, and the specified input-to-output ratio shown in the verified distributor listing is 1:3. The SI ordering suffix identifies the industrial 20-pin SOIC configuration. These characteristics make exact timing, supply-voltage and pin-level verification against the Renesas datasheet essential before replacing another PLL clock generator. The verified datasheet guidance states that the MK2049-36 requires only a small number of external components for proper operation. Decoupling capacitors of 0.01 µF should be connected between VDD and GND close to the device, particularly at pins 4 and 7 and at pins 15 and 17. The Renesas document also recommends 33 Ω series terminating resistors on clock outputs when traces exceed one inch and the characteristic impedance is assumed to be 50 Ω. These details minimize supply coupling and high-frequency clock-edge reflections. Typical applications include telecommunications line equipment, T1 and E1 interface systems, OC3 and E3 clock generation, Gigabit Ethernet clock-distribution networks, and legacy synchronous communications equipment. In these systems, the 3.3 V operating supply and LVCMOS interfaces simplify integration with compatible digital logic. The shared 8 kHz reference allows several output rates to remain phase-related, which is valuable when transmitters, switches, serializers and test equipment must operate coherently. Designers should preserve the manufacturer's recommended 0.01 µF decoupling layout and account for output drive requirements when the clock net is not properly terminated. The 33 Ω source-termination guidance is especially important for long PCB traces or cable connections because excessive edge reflections can degrade timing margin and produce spurious clock activity. Supply sequencing, crystal or oscillator startup behavior, and the exact configuration of each programmable output should be checked in the full datasheet. This product page consolidates the verified manufacturer and distributor information, identifies the documented external-component requirements, and distinguishes true same-package alternatives from redesign-level options. It also provides application-focused design guidance for engineers evaluating the MK2049-36SI as a legacy or production communications clock-synthesis component.

Permintaan RFG Kontak
MK2049-36SILF - 77.76MHz 3.3V PLL Clock | Renesas
MK2049-36SILF

MK2049-36SILF - 77.76MHz 3.3V PLL Clock | Renesas

Renesas Electronics MK2049-36SILF is a 3.3 V communications clock PLL that generates a 77.76 MHz clock in a 20-pin SOIC package measuring 0.295 inches, or 7.50 mm, wide. The device is categorized as a voltage-controlled crystal oscillator PLL clock synthesizer, making it suitable for communications equipment requiring a stable, multiplied reference clock. A PLL clock synthesizer is a clock-and-timing integrated circuit that compares a reference signal with an internal feedback signal and generates a higher-frequency output with controlled phase relationships. In the broader semiconductor hierarchy, it belongs to clock generation, timing control, and frequency synthesis. Its output can provide a convenient clock source for transceivers, controllers, converters, and other digital systems that cannot directly operate from the crystal reference frequency. The MK2049-36SILF operates from 3.3 V and produces a 77.76 MHz clock. Its 20-SOIC package supports conventional surface-mount PCB assembly. The manufacturer documentation recommends 0.01 µF decoupling capacitors between VDD and GND near the device, especially near pins 4 and 7, and 15 and 17. It also recommends 33 Ω series termination resistors on clock outputs when PCB traces exceed approximately 1 inch. The PLL architecture allows the device to derive a higher-frequency communications clock while maintaining controlled frequency relationships. This is useful where a single reference oscillator must serve multiple timing requirements. Because clock edge quality affects downstream data integrity, the output nets should be routed away from high-current switching paths and terminated according to the actual trace geometry and receiver loading. Typical uses include communications modules, clock-distribution networks, interface controllers, frequency-conversion stages, and digital subsystems requiring a 77.76 MHz reference. The part can also serve as a reference for designs using the Site MPN family of audio converters and interface ICs when their clock architecture requires a compatible source. Layout is the primary design consideration. Place the 0.01 µF bypass capacitors directly beside their associated supply and ground pins, minimize the distance from the decoupling network to the package, and preserve a continuous ground reference beneath the device. Use short clock traces and add the recommended 33 Ω source termination when a trace approaches or exceeds 1 inch. This product page combines the device specifications, package details, application guidance, replacement considerations, and practical PCB recommendations into a focused engineering reference. It also distinguishes documented functions from characteristics that still require confirmation in the manufacturer datasheet before production release.

Permintaan RFG Kontak
MK2049-36SITR - 3.3V PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2049-36SITR

MK2049-36SITR - 3.3V PLL Clock Synthesizer | Renesas (Tape & Reel)

Renesas Electronics MK2049-36SITR is a 3.3 V PLL-based communications clock synthesizer that accepts multiple input frequencies and generates T1, E1, T3, E3, OC3 and other communications clock frequencies. The device uses an 8 kHz reference clock, produces LVCMOS outputs, and supports frequencies up to 77.76 MHz. It is supplied in a 20-pin SOIC package. The 3.3 V supply requirement, phase-locked-loop architecture and communications-oriented output range make the MK2049-36SITR suitable for line-card, transmission, switching and other telecommunications clocking systems. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies or divides a stable reference frequency while locking its internal oscillator to that reference. In the product hierarchy, a PLL synthesizer is a clock generator, a clock-and-timing IC and ultimately a semiconductor. Compared with a free-running oscillator, the phase-locked architecture allows multiple related output frequencies to share a common 8 kHz reference, reducing frequency drift between clocks and simplifying synchronization across a communications system. The MK2049-36 family provides one PLL-based clock-synthesis circuit with a maximum reported output frequency of 77.76 MHz. Its input and output signal format is LVCMOS, and the specified input-to-output ratio shown in the verified distributor listing is 1:3. The SI ordering suffix identifies the industrial 20-pin SOIC configuration. These characteristics make exact timing, supply-voltage and pin-level verification against the Renesas datasheet essential before replacing another PLL clock generator. The verified datasheet guidance states that the MK2049-36 requires only a small number of external components for proper operation. Decoupling capacitors of 0.01 µF should be connected between VDD and GND close to the device, particularly at pins 4 and 7 and at pins 15 and 17. The Renesas document also recommends 33 Ω series terminating resistors on clock outputs when traces exceed one inch and the characteristic impedance is assumed to be 50 Ω. These details minimize supply coupling and high-frequency clock-edge reflections. Typical applications include telecommunications line equipment, T1 and E1 interface systems, OC3 and E3 clock generation, Gigabit Ethernet clock-distribution networks, and legacy synchronous communications equipment. In these systems, the 3.3 V operating supply and LVCMOS interfaces simplify integration with compatible digital logic. The shared 8 kHz reference allows several output rates to remain phase-related, which is valuable when transmitters, switches, serializers and test equipment must operate coherently. Designers should preserve the manufacturer's recommended 0.01 µF decoupling layout and account for output drive requirements when the clock net is not properly terminated. The 33 Ω source-termination guidance is especially important for long PCB traces or cable connections because excessive edge reflections can degrade timing margin and produce spurious clock activity. Supply sequencing, crystal or oscillator startup behavior, and the exact configuration of each programmable output should be checked in the full datasheet. This product page consolidates the verified manufacturer and distributor information, identifies the documented external-component requirements, and distinguishes true same-package alternatives from redesign-level options. It also provides application-focused design guidance for engineers evaluating the MK2049-36SITR as a legacy or production communications clock-synthesis component.

Permintaan RFG Kontak
MK2049-45ASI - 51.84MHz Dual-PLL Clock Synth | Renesas
MK2049-45ASI

MK2049-45ASI - 51.84MHz Dual-PLL Clock Synth | Renesas

Renesas Electronics MK2049-45ASI is a 51.84 MHz maximum-frequency dual phase-locked-loop clock synthesizer in a 20-pin SOIC package. It operates from a 3.3 V communications-clock supply and provides one clock-output circuit with a stated input-to-output ratio of 1:3. The device is designed for frequency synthesis and jitter attenuation in communications clock systems. A phase-locked-loop clock synthesizer belongs to the clock and timing IC hierarchy, where it sits below clock-generation and frequency-synthesis functions. It locks an internal oscillator to a reference clock and then generates or divides reference-derived frequencies. Unlike a free-running oscillator, a PLL-based device can transfer frequency stability from an external reference while allowing output frequency synthesis, programmable division, and jitter attenuation. The MK2049-45ASI contains two PLL functions. According to the Renesas MK2049-45 datasheet, the first PLL is VCXO-based and uses a pullable crystal to track signal wander and attenuate input jitter. The second PLL supports frequency synthesis. A maximum output frequency of 51.84 MHz and a 1:3 input-to-output ratio identify the device as a communications-clock generation solution rather than a general-purpose timer. The device accepts a clock reference and produces a clock output without differential signaling. Its architecture is intended to support communications equipment that needs a stable, derived clock while limiting reference jitter. The 3.3 V supply designation also places the device in systems designed around low-voltage digital clock trees, provided the complete power, input, output, and decoupling requirements are followed from the manufacturer datasheet. Typical applications include communication line-card clocking, telecom backplane clock distribution, network-interface clock synthesis, and other systems requiring a PLL-derived communications reference. The maximum 51.84 MHz output makes it particularly relevant to designs operating below that frequency while using a stable external reference and controlled division ratio. When designing a board around the MK2049-45ASI, use the manufacturer pin-description table and recommended external-component values before finalizing the layout. Pay particular attention to clock-input routing, pullable-crystal implementation, output loading, supply decoupling, and unused-pin handling, because incorrect clock topology can undermine otherwise correct PLL operation. This product summary organizes the device architecture, package information, verified drop-in candidates, parameter comparisons, and practical clock-design guidance into a format that helps engineers evaluate the MK2049-45ASI before beginning a communications-clock schematic.

Permintaan RFG Kontak
MK2049-45SI - 51.84MHz Dual PLL Clock Synthesizer | Renesas
MK2049-45SI

MK2049-45SI - 51.84MHz Dual PLL Clock Synthesizer | Renesas

Renesas Electronics Corporation MK2049-45SI is a 3.3 V dual phase-locked-loop clock synthesizer with a maximum output frequency of 51.84 MHz, configured for 8 kHz communications-clock locking, and housed in a 20-pin SOIC package. The device supports frequency synthesis and jitter attenuation, while its VCXO-based first PLL uses a pullable crystal to track signal wander and attenuate input jitter. A phase-locked loop is a timing-control circuit that locks an oscillator phase and frequency to a reference signal. Within the clock and timing hierarchy, a PLL clock synthesizer sits above a crystal oscillator and below communications timing systems, converting or distributing reference clocks while reducing phase noise and jitter. The MK2049-45 family provides selectable output frequencies and buffer-mode options for clocking systems that require deterministic low-jitter timing. The verified source data identifies 14 selectable output frequencies, two buffer-mode selections, a maximum frequency of 51.84 MHz, and operation from an 8 kHz communications-clock input. A 125 MHz high-frequency input is also listed in the comparison data for buffer or jitter-attenuation use. These functions allow one device to address both synthesized communications-clock generation and buffered high-frequency clock distribution. The first PLL is VCXO based and relies on a pullable crystal to follow input-clock wander while attenuating jitter. The second PLL provides the device's synthesis path, with programmable output selections providing flexibility across multiple communications requirements. The source material also identifies the MK2049-45SI as a clock generator, PLL clock synthesizer with one listed PLL channel and a 1:3 input-to-output ratio in one abbreviated specification source. Typical uses include communications infrastructure, line-card timing, 8 kHz-locked reference generation, and high-frequency clock buffering. The device is particularly relevant where an 8 kHz communications reference must be converted into one of 14 supported output frequencies. Its 20-pin SOIC package also allows reuse of an existing surface-mount layout when the appropriate pin configuration and electrical limits are confirmed against the manufacturer datasheet. Designers should verify the selected output frequency, PLL configuration, loop filters, crystal requirements, input-output ratio, and decoupling network against the official datasheet before layout release. The pullable crystal and VCXO topology are central to jitter performance, so incorrect component selection or filtering can undermine the intended phase-noise benefit. Pin assignments and crystal recommendations must be taken directly from the manufacturer documentation rather than inferred from the abbreviated distributor listing. This product analysis consolidates the verified distributor and manufacturer information, distinguishes the confirmed 8 kHz synthesis mode from the 125 MHz buffer mode, and identifies unresolved datasheet details explicitly. It also provides sourcing context, package-aware candidate references, and practical design cautions that are not apparent from a distributor search result alone.

Permintaan RFG Kontak
MK2049-45SILF - 51.84MHz Dual PLL Clock Synthesizer | Renesas
MK2049-45SILF

MK2049-45SILF - 51.84MHz Dual PLL Clock Synthesizer | Renesas

Renesas Electronics MK2049-45SILF is a dual phase-locked-loop clock synthesizer with frequency synthesis and jitter attenuation, operating from a 3.3 V communications-clock supply and housed in a 20-pin SOIC package. The device is identified as a PLL clock synthesizer with a 51.84 MHz output frequency, while its reference circuitry accepts an 8 kHz clock input. Its first PLL uses a VCXO architecture with a pullable crystal to track signal wander and attenuate input jitter, providing a clocking solution for communications equipment requiring multiple synchronized outputs. A PLL clock synthesizer is a clock-and-timing integrated circuit that multiplies, divides, or filters a reference frequency to create stable system clocks. Its hierarchy runs from clock generator to frequency synthesizer, then to PLL-based clock and timing IC. The MK2049-45SILF uses phase locking to relate its synthesized outputs to an external reference, allowing the downstream circuitry to obtain predictable frequencies while reducing phase noise and timing wander. The principal benefits of this device are its dual-PLL organization, VCXO-based reference tracking, jitter attenuation, and support for communications-clock generation. The 51.84 MHz designation makes it relevant to legacy telecommunications, line-card, network-interface, and embedded synchronous systems. Using a single PLL-based clock synthesizer can reduce the number of separate oscillators and dividers required when several related clocks must remain phase-coherent. Its first PLL accepts a reference signal and tracks wander with a pullable crystal, while the second PLL provides frequency synthesis and additional jitter attenuation. This architecture is useful when the source reference includes timing noise or long-term drift and the system requires locally generated clocks with improved stability. The SOIC-20 package also offers a conventional surface-mount footprint compatible with established communications and industrial PCB layouts. Typical implementations include telecommunications line equipment, T1/E1 and related legacy transport systems, network-interface clock recovery, digital signal-processing modules, and embedded control systems requiring 51.84 MHz timing. In these applications, the PLL can derive operating clocks from a shared reference and distribute coherent timing among multiple functional blocks. Designers should follow the Renesas MK2049-45 datasheet for the reference-crystal selection, loop-filter configuration, output-routing options, decoupling requirements, and recommended component values. The reference path and crystal network are critical to jitter performance, so traces should be short, return paths continuous, and supply bypassing placed close to the device pins. This product page combines the manufacturer function description with distributor package and frequency data, practical PLL-design guidance, and confirmed cross-reference information. It is intended to help engineers determine whether the MK2049-45SILF fits a clocking requirement before completing reference, layout, qualification, and sourcing validation.

Permintaan RFG Kontak
MK2049-45SITR - 51.84MHz Dual PLL Clock Synthesizer | Renesas (Tape & Reel)
MK2049-45SITR

MK2049-45SITR - 51.84MHz Dual PLL Clock Synthesizer | Renesas (Tape & Reel)

Renesas Electronics Corporation MK2049-45SITR is a 3.3 V dual phase-locked-loop clock synthesizer with a maximum output frequency of 51.84 MHz, configured for 8 kHz communications-clock locking, and housed in a 20-pin SOIC package. The device supports frequency synthesis and jitter attenuation, while its VCXO-based first PLL uses a pullable crystal to track signal wander and attenuate input jitter. A phase-locked loop is a timing-control circuit that locks an oscillator phase and frequency to a reference signal. Within the clock and timing hierarchy, a PLL clock synthesizer sits above a crystal oscillator and below communications timing systems, converting or distributing reference clocks while reducing phase noise and jitter. The MK2049-45 family provides selectable output frequencies and buffer-mode options for clocking systems that require deterministic low-jitter timing. The verified source data identifies 14 selectable output frequencies, two buffer-mode selections, a maximum frequency of 51.84 MHz, and operation from an 8 kHz communications-clock input. A 125 MHz high-frequency input is also listed in the comparison data for buffer or jitter-attenuation use. These functions allow one device to address both synthesized communications-clock generation and buffered high-frequency clock distribution. The first PLL is VCXO based and relies on a pullable crystal to follow input-clock wander while attenuating jitter. The second PLL provides the device's synthesis path, with programmable output selections providing flexibility across multiple communications requirements. The source material also identifies the MK2049-45SITR as a clock generator, PLL clock synthesizer with one listed PLL channel and a 1:3 input-to-output ratio in one abbreviated specification source. Typical uses include communications infrastructure, line-card timing, 8 kHz-locked reference generation, and high-frequency clock buffering. The device is particularly relevant where an 8 kHz communications reference must be converted into one of 14 supported output frequencies. Its 20-pin SOIC package also allows reuse of an existing surface-mount layout when the appropriate pin configuration and electrical limits are confirmed against the manufacturer datasheet. Designers should verify the selected output frequency, PLL configuration, loop filters, crystal requirements, input-output ratio, and decoupling network against the official datasheet before layout release. The pullable crystal and VCXO topology are central to jitter performance, so incorrect component selection or filtering can undermine the intended phase-noise benefit. Pin assignments and crystal recommendations must be taken directly from the manufacturer documentation rather than inferred from the abbreviated distributor listing. This product analysis consolidates the verified distributor and manufacturer information, distinguishes the confirmed 8 kHz synthesis mode from the 125 MHz buffer mode, and identifies unresolved datasheet details explicitly. It also provides sourcing context, package-aware candidate references, and practical design cautions that are not apparent from a distributor search result alone.

Permintaan RFG Kontak
MK2058-01SI - 27MHz Clock Jitter Attenuator | Renesas Electronics
MK2058-01SI

MK2058-01SI - 27MHz Clock Jitter Attenuator | Renesas Electronics

Renesas Electronics MK2058-01SI is a VCXO-based clock jitter attenuator IC designed for system clock distribution, with a maximum operating frequency of 27 MHz, LVCMOS input and output, and a 2:1 input-to-output ratio in a 20-pin SOIC package. The device uses a 3.15 V to 3.45 V supply, integrates a PLL, and provides one clock circuit for applications that require a low-jitter distributed reference clock. A clock jitter attenuator is a timing-integrity device that reduces unwanted phase variation in a reference clock before it is distributed to a digital system. Clock generators and PLLs are members of the clock and timing IC hierarchy, while the MK2058-01SI specializes in conditioning an existing reference. Its VCXO-based architecture combines an oscillator with a phase-locked loop to attenuate jitter inherited from the incoming source or interconnect path. The verified feature set includes one clock channel, a 27 MHz maximum frequency, LVCMOS-compatible input and output signaling, and a 2:1 input-to-output division ratio. The single-ended architecture means that neither the input nor the output is differential. These characteristics make the device suitable for system clock distribution where a 2:1 divided clock and single-ended LVCMOS interface match the receiving logic. The MK2058-01SI integrates a PLL and a voltage-controlled crystal oscillator rather than functioning only as a frequency divider. This architecture is intended to suppress clock jitter while maintaining a stable system reference. Because the input and output are single-ended, board-level return paths and clock trace topology remain important; short connections, a controlled ground reference, and avoidance of disruptive nearby circuitry can help preserve timing quality. Typical uses include communications equipment, networking systems, embedded digital platforms, and clock-distribution subsystems operating below or at 27 MHz. It is particularly relevant when the source clock exhibits timing variation and the downstream circuitry benefits from a conditioned 2:1 reference. The 20-SOIC surface-mount package supports conventional PCB assembly, although the available 0.295-inch, 7.50 mm-wide body requires careful lead spacing and thermal-layout consideration. Designers should verify crystal selection, loop-filter settings, input waveform quality, and output-drive requirements against the manufacturer datasheet before production release. The data identifies the device as a VCXO-based jitter attenuator, but the supplied source material does not expose the complete recommended external-component list or all electrical characteristics. This page consolidates the verified Renesas and distributor facts for the MK2058-01SI, distinguishes confirmed specifications from missing datasheet parameters, and explains selection trade-offs without presenting unsupported substitutions as drop-in equivalents.

Permintaan RFG Kontak
MK2058-01SITR - 27MHz Clock Jitter Attenuator | Renesas Electronics (Tape & Reel)
MK2058-01SITR

MK2058-01SITR - 27MHz Clock Jitter Attenuator | Renesas Electronics (Tape & Reel)

Renesas Electronics MK2058-01SITR is a VCXO-based clock jitter attenuator IC designed for system clock distribution, with a maximum operating frequency of 27 MHz, LVCMOS input and output, and a 2:1 input-to-output ratio in a 20-pin SOIC package. The device uses a 3.15 V to 3.45 V supply, integrates a PLL, and provides one clock circuit for applications that require a low-jitter distributed reference clock. A clock jitter attenuator is a timing-integrity device that reduces unwanted phase variation in a reference clock before it is distributed to a digital system. Clock generators and PLLs are members of the clock and timing IC hierarchy, while the MK2058-01SITR specializes in conditioning an existing reference. Its VCXO-based architecture combines an oscillator with a phase-locked loop to attenuate jitter inherited from the incoming source or interconnect path. The verified feature set includes one clock channel, a 27 MHz maximum frequency, LVCMOS-compatible input and output signaling, and a 2:1 input-to-output division ratio. The single-ended architecture means that neither the input nor the output is differential. These characteristics make the device suitable for system clock distribution where a 2:1 divided clock and single-ended LVCMOS interface match the receiving logic. The MK2058-01SITR integrates a PLL and a voltage-controlled crystal oscillator rather than functioning only as a frequency divider. This architecture is intended to suppress clock jitter while maintaining a stable system reference. Because the input and output are single-ended, board-level return paths and clock trace topology remain important; short connections, a controlled ground reference, and avoidance of disruptive nearby circuitry can help preserve timing quality. Typical uses include communications equipment, networking systems, embedded digital platforms, and clock-distribution subsystems operating below or at 27 MHz. It is particularly relevant when the source clock exhibits timing variation and the downstream circuitry benefits from a conditioned 2:1 reference. The 20-SOIC surface-mount package supports conventional PCB assembly, although the available 0.295-inch, 7.50 mm-wide body requires careful lead spacing and thermal-layout consideration. Designers should verify crystal selection, loop-filter settings, input waveform quality, and output-drive requirements against the manufacturer datasheet before production release. The data identifies the device as a VCXO-based jitter attenuator, but the supplied source material does not expose the complete recommended external-component list or all electrical characteristics. This page consolidates the verified Renesas and distributor facts for the MK2058-01SITR, distinguishes confirmed specifications from missing datasheet parameters, and explains selection trade-offs without presenting unsupported substitutions as drop-in equivalents.

Permintaan RFG Kontak
MK2059-01SI - 25.92MHz Clock Translator | Renesas | Telecom
MK2059-01SI

MK2059-01SI - 25.92MHz Clock Translator | Renesas | Telecom

The Renesas Electronics MK2059-01SI is a VCXO-based frame clock frequency translator with a maximum output frequency of 25.92 MHz, LVCMOS input and output interfaces, and a 20-pin SOIC package. It accepts an 8 kHz frame-rate reference clock and phase-locks its generated output to that reference, producing common telecommunications clock frequencies. A voltage-controlled crystal oscillator-based clock translator is a clock-generation IC that combines frequency translation, phase locking, and reference synchronization. It belongs to the broader clock and timing IC hierarchy, where clock generators and phase-locked loops support communication networks, digital transport systems, and other equipment requiring stable, traceable timing references. Unlike a free-running oscillator, the MK2059-01SI derives its output from an external reference, improving synchronization across a telecommunications system. Key features include a 25.92 MHz maximum output frequency, an input-to-output ratio of 2:1, LVCMOS input and output signaling, and an integrated PLL. The supply-voltage range is 3.15 V to 3.45 V, while the rated operating-temperature range is -40°C to +85°C. The surface-mount 20-SOIC package provides a compact option for communication and timing equipment. Internally, the device uses a VCXO-based architecture and PLL-based clock generation to lock the generated clock to the 8 kHz input reference. This phase-locked relationship is the principal technical feature: the output is not intended as an unrelated free-running oscillator but as a translated reference derived from the incoming frame clock. The PLL feature and LVCMOS interfaces place the device in the class of integrated frequency translators intended for telecommunications clocking. Typical applications include telecommunications line equipment, frame-clock synchronization networks, clock distribution subsystems, and communication interfaces that require a derived reference from an 8 kHz source. The 25.92 MHz maximum output makes it suitable for systems operating at the stated common telecommunications reference frequency, while the 3.15 V to 3.45 V supply range supports low-voltage digital clock architectures. Designers should verify the input reference amplitude, output waveform, PLL loop stability, and decoupling requirements against the manufacturer datasheet before layout. The LVCMOS clock path requires short, controlled-impedance routing and clean return paths, while the 20-SOIC footprint requires adequate board area and thermal consideration for reliable assembly. This page combines verified manufacturer and distributor information with explicit data gaps, application guidance, and package-specific replacement analysis. It is intended to help engineers evaluate the MK2059-01SI without mistaking packaging variants for functionally different devices or assuming unreported electrical specifications.

Permintaan RFG Kontak
MK2059-01SILF 25.92MHz Clock Translator | Renesas
MK2059-01SILF

MK2059-01SILF 25.92MHz Clock Translator | Renesas

Renesas Electronics MK2059-01SILF is a VCXO-based frame-clock frequency translator IC that generates a 25.92 MHz output clock from an 8 kHz frame-rate reference. The device is packaged in a 20-pin SOIC measuring 0.295 inch, or 7.50 mm, in width. Its principal function is to translate a low-frequency frame reference into a stable telecommunications clock while maintaining phase locking to the reference input. A VCXO-based clock frequency translator belongs to the clock and timing IC hierarchy, where it sits between a low-frequency synchronization reference and the higher-frequency clocks used by communications equipment. Unlike a simple frequency divider, this architecture uses a voltage-controlled crystal oscillator to generate the output clock and phase-lock it to the incoming 8 kHz frame signal. This makes the device relevant where equipment must derive a common reference frequency from an existing frame network. The MK2059-01SILF is identified as a clock synthesizer and jitter-cleaning device with a 25.92 MHz output. Its 20-pin SOIC package provides a surface-mount implementation for telecommunications and other synchronous electronic systems. The 25.92 MHz result supports clocking roles requiring a substantially higher frequency than the 8 kHz synchronization reference, while the phase-locked architecture provides a defined relationship to the original frame timing. Technically, the key operating concept is the interaction between the VCXO and the phase-locking loop. The frame reference establishes the target phase relationship, and the controlled oscillator produces the corresponding high-frequency output. Compared with distributing a free-running oscillator alone, this arrangement is intended for equipment that must remain aligned with a wider network timing reference. Detailed loop bandwidth, jitter, supply-voltage limits, and current limits must be confirmed in the manufacturer datasheet before release to production. Typical applications include telecommunications line-card clocking, frame synchronization, network-interface timing, and embedded communications equipment. It can also be considered wherever an 8 kHz frame reference must be converted into a 25.92 MHz clock without redesigning the surrounding timing architecture. Designers should validate the reference frequency, output frequency, load requirements, and loop behavior against the complete system timing budget. The primary design consideration is to treat the reference and output clocks as a controlled phase-locked system. Use the manufacturer pin-description table when assigning PCB tracks, and preserve the recommended grounding and decoupling arrangement around the clock and power pins. Because clock translators can amplify supply noise or layout disturbance into timing errors, short return paths and controlled impedance are especially important. This page organizes the device function, package information, sourcing questions, drop-in comparison limits, and design cautions into a compact engineering reference. It also separates confirmed product facts from parameters that still require verification against the Renesas datasheet, helping designers avoid treating an incomplete clock specification as a production-ready guarantee.

Permintaan RFG Kontak
MK2059-01SITR - 25.92MHz Clock Translator | Renesas | Telecom (Tape & Reel)
MK2059-01SITR

MK2059-01SITR - 25.92MHz Clock Translator | Renesas | Telecom (Tape & Reel)

The Renesas Electronics MK2059-01SITR is a VCXO-based frame clock frequency translator with a maximum output frequency of 25.92 MHz, LVCMOS input and output interfaces, and a 20-pin SOIC package. It accepts an 8 kHz frame-rate reference clock and phase-locks its generated output to that reference, producing common telecommunications clock frequencies. A voltage-controlled crystal oscillator-based clock translator is a clock-generation IC that combines frequency translation, phase locking, and reference synchronization. It belongs to the broader clock and timing IC hierarchy, where clock generators and phase-locked loops support communication networks, digital transport systems, and other equipment requiring stable, traceable timing references. Unlike a free-running oscillator, the MK2059-01SITR derives its output from an external reference, improving synchronization across a telecommunications system. Key features include a 25.92 MHz maximum output frequency, an input-to-output ratio of 2:1, LVCMOS input and output signaling, and an integrated PLL. The supply-voltage range is 3.15 V to 3.45 V, while the rated operating-temperature range is -40°C to +85°C. The surface-mount 20-SOIC package provides a compact option for communication and timing equipment. Internally, the device uses a VCXO-based architecture and PLL-based clock generation to lock the generated clock to the 8 kHz input reference. This phase-locked relationship is the principal technical feature: the output is not intended as an unrelated free-running oscillator but as a translated reference derived from the incoming frame clock. The PLL feature and LVCMOS interfaces place the device in the class of integrated frequency translators intended for telecommunications clocking. Typical applications include telecommunications line equipment, frame-clock synchronization networks, clock distribution subsystems, and communication interfaces that require a derived reference from an 8 kHz source. The 25.92 MHz maximum output makes it suitable for systems operating at the stated common telecommunications reference frequency, while the 3.15 V to 3.45 V supply range supports low-voltage digital clock architectures. Designers should verify the input reference amplitude, output waveform, PLL loop stability, and decoupling requirements against the manufacturer datasheet before layout. The LVCMOS clock path requires short, controlled-impedance routing and clean return paths, while the 20-SOIC footprint requires adequate board area and thermal consideration for reliable assembly. This page combines verified manufacturer and distributor information with explicit data gaps, application guidance, and package-specific replacement analysis. It is intended to help engineers evaluate the MK2059-01SITR without mistaking packaging variants for functionally different devices or assuming unreported electrical specifications.

Permintaan RFG Kontak
MK2069-01GI - 160MHz VCXO Clock Synchronizer | Renesas
MK2069-01GI

MK2069-01GI - 160MHz VCXO Clock Synchronizer | Renesas

The Renesas Electronics MK2069-01GI is a VCXO-based line-card clock synchronizer with a maximum stated frequency of 160 MHz, a 3.15 V to 3.45 V supply range, and a 56-pin thin TSSOP package measuring 0.240 inch, or 6.10 mm, in width. It combines system synchronization, jitter attenuation, and frequency multiplication or translation in one mixed analog and digital timing IC. A clock synchronizer is a timing integrated circuit that coordinates one or more clock domains by selecting reference inputs and distributing or conditioning clock signals. The MK2069-01GI belongs to the broader clock generator, PLL, and frequency synthesizer category, where its VCXO architecture provides a variable-frequency reference that can be controlled to support synchronization and output-frequency conversion. The principal verified features include a 160 MHz maximum clock frequency, three alternate reference inputs, an asynchronous input multiplexer, and LVCMOS differential outputs. ICLK0 and ICLK1 are 5 V tolerant according to the manufacturer datasheet, while the remaining reference inputs do not share that stated tolerance. The device is intended for surface mounting in a 56-TFSOP package and operates over the disclosed -40 °C to 85 °C range. The MK2069-01 uses a VCXO-based architecture to deliver the performance expected of a canned VCXO-based hybrid timing device at a lower cost. Its mixed analog and digital implementation makes PCB layout and external component selection especially important. Short, controlled routing, suitable grounding, and compliant external crystal-network components are necessary to preserve timing performance and stability. Typical uses include line-card clock synchronization, telecommunications equipment, communication infrastructure, frequency translation, and jitter-sensitive clock distribution. A 160 MHz ceiling makes the device relevant to systems that distribute a common reference while requiring selectable reference sources or attenuated clock paths. Designers should treat the 3.15 V to 3.45 V supply range as a hard constraint and should not infer 5 V operation merely because ICLK0 and ICLK1 are 5 V tolerant. The input multiplexer selection is asynchronous and non-latched, so control timing and switching behavior should be evaluated against the system requirements. Exact power consumption, jitter limits, output configurations, and full pin assignments require confirmation from the manufacturer datasheet before layout release. This product record combines verified manufacturer and distributor information with package-specific engineering guidance, sourcing context, and candid identification of parameters that still require design-in verification.

Permintaan RFG Kontak
MK2069-01GITR - 160MHz VCXO Clock Synchronizer | Renesas (Tape & Reel)
MK2069-01GITR

MK2069-01GITR - 160MHz VCXO Clock Synchronizer | Renesas (Tape & Reel)

The Renesas Electronics MK2069-01GITR is a VCXO-based line-card clock synchronizer with a maximum stated frequency of 160 MHz, a 3.15 V to 3.45 V supply range, and a 56-pin thin TSSOP package measuring 0.240 inch, or 6.10 mm, in width. It combines system synchronization, jitter attenuation, and frequency multiplication or translation in one mixed analog and digital timing IC. A clock synchronizer is a timing integrated circuit that coordinates one or more clock domains by selecting reference inputs and distributing or conditioning clock signals. The MK2069-01GITR belongs to the broader clock generator, PLL, and frequency synthesizer category, where its VCXO architecture provides a variable-frequency reference that can be controlled to support synchronization and output-frequency conversion. The principal verified features include a 160 MHz maximum clock frequency, three alternate reference inputs, an asynchronous input multiplexer, and LVCMOS differential outputs. ICLK0 and ICLK1 are 5 V tolerant according to the manufacturer datasheet, while the remaining reference inputs do not share that stated tolerance. The device is intended for surface mounting in a 56-TFSOP package and operates over the disclosed -40 °C to 85 °C range. The MK2069-01 uses a VCXO-based architecture to deliver the performance expected of a canned VCXO-based hybrid timing device at a lower cost. Its mixed analog and digital implementation makes PCB layout and external component selection especially important. Short, controlled routing, suitable grounding, and compliant external crystal-network components are necessary to preserve timing performance and stability. Typical uses include line-card clock synchronization, telecommunications equipment, communication infrastructure, frequency translation, and jitter-sensitive clock distribution. A 160 MHz ceiling makes the device relevant to systems that distribute a common reference while requiring selectable reference sources or attenuated clock paths. Designers should treat the 3.15 V to 3.45 V supply range as a hard constraint and should not infer 5 V operation merely because ICLK0 and ICLK1 are 5 V tolerant. The input multiplexer selection is asynchronous and non-latched, so control timing and switching behavior should be evaluated against the system requirements. Exact power consumption, jitter limits, output configurations, and full pin assignments require confirmation from the manufacturer datasheet before layout release. This product record combines verified manufacturer and distributor information with package-specific engineering guidance, sourcing context, and candid identification of parameters that still require design-in verification.

Permintaan RFG Kontak
MK2069-04GI - 160MHz VCXO Clock Translator | Renesas
MK2069-04GI

MK2069-04GI - 160MHz VCXO Clock Translator | Renesas

The Renesas Electronics MK2069-04GI is a VCXO-based universal clock translator with a maximum operating frequency of 160 MHz, PLL-based clock generation, and LVCMOS input/output interfaces. It is packaged in a 56-TFSOP package measuring approximately 6.10 mm in width. The device is intended for translating clock frequencies between systems whose clocks do not share a convenient direct integer relationship. A VCXO-based clock translator is a clock-generation and timing-management device that uses a voltage-controlled crystal oscillator and phase-locked loop architecture. In the broader semiconductor hierarchy, it belongs to the clock and timing IC category, where PLL-based translators condition, multiply, divide, or otherwise redistribute reference-clock energy. The MK2069-04GI provides a single LVCMOS clock output path and uses selectable reference and feedback dividers to establish the translation ratio. Key features include support for frequencies up to 160 MHz, PLL operation, LVCMOS signal compatibility, and user-selectable divider ranges. The on-chip VCXO produces a stable, low-jitter output clock using a phase detector frequency down to 8 kHz or lower. This architecture is useful for telecom frame clocks, including standards operating from an 8 kHz common clock, and for other systems requiring clock conversion between unrelated frequencies. The PLL phase detector, reference divider, feedback divider, and VCXO work together to correct phase and frequency errors between the incoming reference and the generated output. Divider selection determines the effective multiplication ratio, while the output stage delivers the resulting clock in LVCMOS form. The device also provides jitter attenuation of the input clock and can accept low input frequencies, making it useful where conventional integer-ratio clock trees are insufficient. Typical applications include telecom line-card clock translation, network interface clocking, communications equipment, test and measurement systems, and embedded systems that need a locally generated clock with low jitter. The part can also support clock-domain adaptation where the source and destination frequencies have a low common denominator. In each case, the design must select divider values compatible with the PLL operating range and preserve the required output-to-input phase relationship. Designers should verify the reference and feedback divider combinations, input slew rate, output loading, and loop stability against the manufacturer datasheet. The 56-TFSOP footprint requires adequate board area and careful routing of clock inputs and power supplies. Decoupling close to the supply pins and a controlled source impedance are important for maintaining predictable phase noise and jitter performance. This product summary consolidates distributor availability information, manufacturer-based clock architecture details, replacement guidance, and practical implementation considerations into a design-oriented reference for engineers evaluating the MK2069-04GI.

Permintaan RFG Kontak
MK2069-04GITR - 160MHz VCXO Clock Translator | Renesas (Tape & Reel)
MK2069-04GITR

MK2069-04GITR - 160MHz VCXO Clock Translator | Renesas (Tape & Reel)

The Renesas Electronics MK2069-04GITR is a VCXO-based universal clock translator with a maximum operating frequency of 160 MHz, PLL-based clock generation, and LVCMOS input/output interfaces. It is packaged in a 56-TFSOP package measuring approximately 6.10 mm in width. The device is intended for translating clock frequencies between systems whose clocks do not share a convenient direct integer relationship. A VCXO-based clock translator is a clock-generation and timing-management device that uses a voltage-controlled crystal oscillator and phase-locked loop architecture. In the broader semiconductor hierarchy, it belongs to the clock and timing IC category, where PLL-based translators condition, multiply, divide, or otherwise redistribute reference-clock energy. The MK2069-04GITR provides a single LVCMOS clock output path and uses selectable reference and feedback dividers to establish the translation ratio. Key features include support for frequencies up to 160 MHz, PLL operation, LVCMOS signal compatibility, and user-selectable divider ranges. The on-chip VCXO produces a stable, low-jitter output clock using a phase detector frequency down to 8 kHz or lower. This architecture is useful for telecom frame clocks, including standards operating from an 8 kHz common clock, and for other systems requiring clock conversion between unrelated frequencies. The PLL phase detector, reference divider, feedback divider, and VCXO work together to correct phase and frequency errors between the incoming reference and the generated output. Divider selection determines the effective multiplication ratio, while the output stage delivers the resulting clock in LVCMOS form. The device also provides jitter attenuation of the input clock and can accept low input frequencies, making it useful where conventional integer-ratio clock trees are insufficient. Typical applications include telecom line-card clock translation, network interface clocking, communications equipment, test and measurement systems, and embedded systems that need a locally generated clock with low jitter. The part can also support clock-domain adaptation where the source and destination frequencies have a low common denominator. In each case, the design must select divider values compatible with the PLL operating range and preserve the required output-to-input phase relationship. Designers should verify the reference and feedback divider combinations, input slew rate, output loading, and loop stability against the manufacturer datasheet. The 56-TFSOP footprint requires adequate board area and careful routing of clock inputs and power supplies. Decoupling close to the supply pins and a controlled source impedance are important for maintaining predictable phase noise and jitter performance. This product summary consolidates distributor availability information, manufacturer-based clock architecture details, replacement guidance, and practical implementation considerations into a design-oriented reference for engineers evaluating the MK2069-04GITR.

Permintaan RFG Kontak
MK20DN128VFM5557 - 50MHz 128KB Cortex-M4 MCU | NXP
MK20DN128VFM5557

MK20DN128VFM5557 - 50MHz 128KB Cortex-M4 MCU | NXP

The NXP MK20DN128VFM5557 is a 32-bit single-core ARM Cortex-M4 microcontroller operating at 50 MHz, with 128 KB of flash memory, supplied in a 32-pin QFN package measuring 5 mm by 5 mm. It is a member of the Kinetis K20 microcontroller family and is designed for embedded control applications requiring deterministic processing, compact packaging, and integrated memory resources. An ARM Cortex-M4 microcontroller is a 32-bit reduced-instruction-set-computing core used in embedded systems for control, communications, monitoring, and signal-processing tasks. The Cortex-M4 architecture belongs to the microcontroller processor hierarchy and combines low-power embedded operation with instruction sets suitable for real-time control workloads. The K20 family provides a bridge between general embedded processing and resource-constrained industrial designs. The verified distributor description identifies a 50 MHz operating frequency, 128 KB flash organized as 128K x 8, and a 32-QFN 5 mm by 5 mm package. The target suffix 5557 identifies the specific orderable configuration, while the related MK20DN128VFM5 listing identifies an otherwise closely related 128 KB, 50 MHz Cortex-M4 device in a 32-QFN exposed-pad package. Electrical limits, SRAM capacity, peripherals, pin functions, operating-temperature limits, and clock-tree details were not supplied and therefore remain marked as data needed. Typical applications include industrial control, sensor acquisition, communications equipment, embedded instrumentation, and compact embedded platforms. The 50 MHz Cortex-M4 core is suitable for tasks involving digital control, protocol handling, data acquisition, and supervisory logic. Its small QFN package supports space-constrained boards, although exposed-pad thermal and assembly requirements must be considered where applicable. For PCB design, engineers should follow the manufacturer package drawing and pinout rather than infer connections from the distributor summary. Decoupling, grounding, exposed-pad layout, signal-integrity practices, and programming-interface requirements should be validated against the official NXP documentation. This page combines verified distributor information, package and memory facts, sourcing data, and practical replacement guidance without inventing unavailable electrical specifications.

Permintaan RFG Kontak
MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP
MK20DN128VMP5

MK20DN128VMP5 - Kinetis K20 50MHz Cortex-M4 MCU, 128KB Flash | NXP

The NXP MK20DN128VMP5 is an industrial-grade 32-bit ARM Cortex-M4 microcontroller from the Kinetis K20 sub-family, integrating 128 KB of flash, 16 KB of RAM, and USB connectivity in a 64-pin MAPBGA (5x5 mm) package. Key features include a 50 MHz Cortex-M4 core with single-precision FPU, 128 KB program flash, 16 KB SRAM, a USB 2.0 Full-Speed device/host/on-the-go controller, multiple serial interfaces (UART, SPI, I2C), a 16-channel 16-bit ADC, and flexible low-power modes for energy-aware applications. The 64 MAPBGA package provides a compact footprint suitable for space-constrained designs. A microcontroller (MCU) is a single-chip computer that integrates a CPU core, memory (flash and RAM), and programmable peripherals. The Cortex-M4 core is an ARM processor designed for embedded deterministic real-time control, with DSP extensions and an optional single-precision floating-point unit. The Kinetis K20 sub-family specifically targets applications that need USB connectivity combined with low-power operation, sitting between entry-level Kinetis EA series and higher-end K series in the NXP MCU portfolio. USB-capable MCUs are categorized as microcontrollers with integrated USB PHY/interface, simplifying designs that require USB device or host communication. The MK20DN128VMP5 implements an ARM Cortex-M4 core built on a low-leakage process, supporting 50 MHz operation with hardware multiply/divide and DSP instructions. The 128 KB flash is organized as 128K x 8 with ECC support; the 16 KB SRAM includes bit-band aliasing for atomic bit manipulation. The integrated USB 2.0 Full-Speed controller with on-chip transceiver eliminates the need for external PHY components, while the 16-bit SAR ADC with hardware trigger support enables precise analog measurement. Multiple low-power modes (Run, Wait, Stop, VLPR, VLPW, VLPS, LLS, VLLSx) allow designers to optimize energy consumption. Typical applications include USB human-interface devices (HIDs), industrial control nodes, low-power sensor hubs, point-of-sale terminals, and portable medical accessories. The USB device controller with on-chip transceiver simplifies peripheral designs, while the Cortex-M4 DSP extensions enable on-chip signal processing. The compact 64 MAPBGA package suits wearables and hand-held instruments where PCB area is at a premium. When designing with this MCU, ensure proper decoupling with 100 nF ceramic capacitors adjacent to each VDD pin and a bulk 4.7 uF capacitor on the main supply rail. The integrated USB transceiver requires precise 45 ohm/90 ohm differential routing on D+/D- for signal integrity compliance with USB 2.0 Full-Speed specifications. Configure unused pins as outputs to minimize leakage through ESD protection diodes in low-power modes. This page synthesizes distributor pricing, drop-in same-package alternatives, and practical PCB design notes that go beyond what is typically listed in the NXP datasheet revision history, helping engineers select the right Kinetis variant for production.

Permintaan RFG Kontak