Produk (21.000+)

CY8C3444LTI-113 8-Bit 16KB Flash PSoC 3 | Infineon
CY8C3444LTI-113

CY8C3444LTI-113 8-Bit 16KB Flash PSoC 3 | Infineon

The Infineon CY8C3444LTI-113 is an 8-bit programmable system-on-chip, or PSoC, in a 68-VFQFN package with an exposed pad. The device is identified as an IC MCU with 16 KB of embedded flash and belongs to the CY8C34 family of mixed-signal microcontrollers. Its combination of an 8051-compatible processing core, programmable digital and analog resources, and a compact surface-mount package supports embedded control designs where peripheral integration matters. A PSoC is a mixed-signal microcontroller that combines a CPU with programmable digital blocks, analog-to-digital converters, digital-to-analog converters, comparators, timers, and communication peripherals on one integrated device. This device hierarchy—PSoC to mixed-signal microcontroller to embedded processor to semiconductor—allows designers to consolidate functions that would otherwise require a discrete MCU and several supporting ICs. Confirmed headline features include 8-bit processing, 16 KB of flash memory, a 68-VFQFN exposed-pad package, and an integrated microcontroller architecture. The CY8C34 family also provides programmable system resources for sensing, control, and communications. Because the exact clock rating, SRAM capacity, analog conversion performance, GPIO count, and electrical limits for this specific suffix are not stated in the product-page excerpts, engineers should confirm those values in the manufacturer datasheet before finalizing clock, memory, and peripheral assignments. The exposed thermal pad provides a heat-spreading connection between the device and the PCB. Its effectiveness depends on the pad being soldered according to the land pattern and connected through thermal-via arrays to an adequate copper area. Package selection alone does not guarantee equivalent performance between devices in different QFN forms, so mechanical drawings, pin assignment, and exposed-pad dimensions must be checked before substitution. Typical uses for the CY8C3444LTI-113 include compact industrial controls, touch-capacitive interface controllers, sensor-conditioning systems, consumer accessories, and embedded communication modules. The programmable mixed-signal architecture is particularly useful when a design needs several sensing and control functions but does not justify a larger microcontroller or discrete analog implementation. Design should begin with the manufacturer pin-description table and reference design guidance. Confirm the exposed-pad connection, supply pins, decoupling requirements, programming interface, and unused GPIO states before routing the board. Also validate the memory map, interrupt structure, peripheral clocking, and analog operating conditions against the exact CY8C3444LTI-113 ordering information. This product page consolidates the confirmed device identity, package form, memory configuration, programming support, drop-in options, and practical design considerations. It also distinguishes confirmed ordering information from electrical details that still require direct confirmation against the manufacturer documentation.

Permintaan RFG Kontak
CY8C3444LTI-114 - 8-Bit 50MHz PSoC 3 MCU | Infineon
CY8C3444LTI-114

CY8C3444LTI-114 - 8-Bit 50MHz PSoC 3 MCU | Infineon

The Infineon CY8C3444LTI-114 is an 8-bit PSoC 3 programmable system-on-chip with a 50 MHz 8051 CPU, 16 kByte of flash memory, 2 kByte of SRAM, and a 68-VFQFN package with an exposed pad. It combines a microcontroller core with configurable analog and digital blocks, making it suitable for embedded sensing, control, and low-power instrument applications. A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller that integrates a CPU, programmable analog and digital peripherals, memory, and routing resources on one die. Unlike a fixed-function MCU, the CY8C3 family allows designers to configure peripheral behavior and signal routing in firmware, reducing the need for discrete external components and consolidating analog control with digital logic. The CY8C3444LTI-114 provides up to 50 MHz CPU operation, 16 kByte of flash, and 2 kByte of SRAM. Its configurable blocks support analog functions such as analog-to-digital conversion, digital-to-analog conversion, comparators, and timers, while digital blocks can implement counters, serial communication, and programmable logic. The 68-VFQFN package also includes an exposed thermal pad for improved heat removal. The CY8C3 architecture provides a unified development approach in which firmware configures analog routing, interrupt behavior, and digital peripherals. This makes the device especially useful for sensor interfaces, industrial control panels, building controls, and low-power measurement systems where analog signal conditioning and microcontroller processing must coexist on a compact board. Typical uses include temperature and environmental sensing, touch-controlled interfaces, motor and actuator control, low-power industrial nodes, and compact test instruments. Designers should preserve the exposed-pad copper area, follow the recommended decoupling layout, and confirm the device-specific operating limits against the Cypress PSoC 3 CY8C34 Family Data Sheet. When designing the PCB, connect the exposed pad to the ground plane with thermal vias and place input and output capacitors close to their associated pins. Validate startup behavior, brownout settings, clock configuration, and unused-pin states in firmware because the exposed pad and analog supply pins have defined electrical requirements. This page combines package, memory, processor, and cross-reference information with practical PCB guidance for engineers evaluating the CY8C3444LTI-114 in new PSoC 3 designs. It also identifies the closest documented same-family option and explains where a confirmed drop-in replacement has not been established.

Permintaan RFG Kontak
CY8C3444LTI-119 - 50MHz 8051 PSoC 3 MCU 48-QFN | Cypress
CY8C3444LTI-119

CY8C3444LTI-119 - 50MHz 8051 PSoC 3 MCU 48-QFN | Cypress

The Cypress Semiconductor CY8C3444LTI-119 is an 8-bit PSoC 3 programmable system-on-chip with an 8051 CPU core operating up to 50 MHz, 16 KB of embedded flash, 2 KB of SRAM and a 12-bit ADC, packaged in a 48-VFQFN (7 x 7 mm) package with an exposed thermal pad. Its supply voltage range is 1.71 V to 5.5 V. A PSoC (Programmable System-on-Chip) is a mixed-signal microcontroller architecture that integrates a CPU core, programmable analog and digital peripheral blocks, memory and dedicated DMA routing on a single die. In the signal chain of an embedded system, a PSoC sits above a plain microcontroller and below a full system-on-chip: instead of adding a separate ADC, op-amp, timer or routing fabric in external silicon, the designer configures on-chip analog blocks and digital blocks through firmware registers. That is why PSoC 3 devices are described as a true programmable embedded system-on-chip. Key features of this device include 50 MHz DC operation of the 8051 core, 16 KB (16K x 8) flash with four levels of flash protection, 2 KB of SRAM, 512 bytes of data EEPROM and 8 KB of ECC flash. On-chip resources include a 12-bit ADC, two datapointers, an interrupt controller with 27 sources and 8 priority levels, and one Peripheral Hub Unit (PHUB) with eight parallel access ports for deterministic peripheral-to-peripheral transfers without CPU intervention. The architecture pairs the 8051 instruction set with a dedicated DMA controller, which lets ADC conversions, timer captures and serial transfers run autonomously while the CPU handles control logic. The PHUB routing fabric connects peripherals through a crossbar-style interconnect, so designers can re-map signals in firmware instead of fixing them in silicon. This is the core reason PSoC 3 parts deliver configurable analog and digital functions with lower external component counts than discrete 8051 designs. Typical applications include industrial control and sensor-conditioning panels, human-machine interface boards with capacitive touch buttons, low-power battery-operated sensor nodes, building and HVAC control modules, small motor and actuator controllers, and compact consumer accessories such as lighting controllers and handheld instruments. When designing around this part, treat the exposed pad as a thermal and electrical connection to ground, and keep the 1.71 V to 5.5 V rail within tolerance across temperature. The 8051 core is 8-bit, so choose arithmetic types carefully, and confirm that the analog blocks and routing you need are present in this specific CY8C34 device rather than in a larger family member. This page brings together the manufacturer part parameters, the CY8C3 family ordering information, drop-in alternatives within the same 48-VFQFN footprint, and practical design notes that go beyond the ordering table.

Permintaan RFG Kontak
CY8C3444LTI-120 - 50MHz 8051 PSoC 3 MCU | Infineon
CY8C3444LTI-120

CY8C3444LTI-120 - 50MHz 8051 PSoC 3 MCU | Infineon

The Infineon CY8C3444LTI-120 is an 8051-based PSoC 3 programmable-system-on-chip microcontroller operating up to 50 MHz, with 16 kByte of programmable flash and 2 kByte of SRAM in a 48-QFN package measuring 7 mm by 7 mm. It integrates programmable digital and analog functions with 25 I/O pins and supports I2C, SPI, USB, UART, USART, and EBI/EMI interfaces. The device operates from -40°C to +85°C and is identified as RoHS compliant. A PSoC 3 microcontroller is a mixed-signal embedded controller that combines an MCU core with programmable peripheral blocks and analog resources. The PSoC family extends the conventional microcontroller hierarchy by placing configurable digital logic, analog conversion, memory, and communication peripherals around a CPU core. This enables one device to consolidate functions that otherwise require a processor, separate programmable logic, analog ICs, and multiple discrete interface components. The CY8C3444LTI-120 uses an 8-bit 8051 core with a maximum clock frequency of 50 MHz. Its 16 kByte flash provides program storage, while 2 kByte of SRAM supports working data. Twenty-five I/O pins provide connections for sensors, actuators, human-machine-interface circuits, and communications. An internal oscillator reduces dependence on an external clock source in designs that do not require precise external timing. The integrated interface set includes I2C, SPI, USB, UART, USART, and EBI/EMI, allowing the controller to connect with sensors, memory, displays, communications transceivers, and external bus devices. This combination is particularly useful in compact embedded systems where board area and component count are important. Because the peripherals are programmable, engineers can configure pin routing and peripheral behavior more flexibly than with a fixed-function microcontroller. Typical applications include industrial sensing and control equipment, USB-connected human-machine interfaces, compact consumer products, communications modules, and embedded control systems with mixed analog and digital inputs. The 48-QFN exposed-pad package supports compact surface-mount layouts, but its thermal and electrical performance depends on adequate exposed-pad soldering and PCB copper. Firmware, peripheral configuration, pin routing, and external interface implementation must be validated for each application. For a new design, confirm voltage limits, clock requirements, startup behavior, and all peripheral electrical limits in the manufacturer datasheet before schematic release. Provide the exposed pad with a solderable thermal and electrical land pattern, follow the recommended decoupling arrangement, and avoid assigning functions until the complete package pin map and power requirements have been checked. This product page consolidates the exact MPN specifications, sourcing information, interface coverage, package data, and practical design considerations needed to evaluate the CY8C3444LTI-120 alongside same-package PSoC 3 options.

Permintaan RFG Kontak
CY8C3444PVI-100 50MHz 16KB Flash MCU | Infineon
CY8C3444PVI-100

CY8C3444PVI-100 50MHz 16KB Flash MCU | Infineon

The Infineon CY8C3444PVI-100 is an 8-bit 8051-compatible PSoC 3 programmable system-on-chip with a 50 MHz operating frequency, 16 KB of flash memory, and a 48-pin SSOP package. It operates across 1.71 V to 5.5 V, making it suitable for embedded control, industrial instrumentation, consumer products, and low-power sensor systems. Its configurable analog and digital blocks combine programmable system-on-chip functionality with an 8051-compatible instruction set. A programmable system-on-chip, or PSoC, is an integrated circuit that places a microcontroller core, programmable analog and digital peripherals, memory, and connectivity-related I/O into one configurable device. The PSoC family extends beyond the conventional microcontroller hierarchy by allowing designers to adapt peripheral functions to the signal chain. In this device, the 8-bit core and configurable blocks support compact designs that would otherwise require a processor, discrete converters, analog switches, and supporting logic. The primary operating characteristics are a 50 MHz clock, 16 KB of flash program memory, and a 1.71 V to 5.5 V supply range. The verified product descriptions also identify 2 KB of SRAM for the CY8C3444 variant and an 8051-compatible architecture. These resources allow moderate protocol handling, control-loop execution, digital filtering, and interface management without moving to a larger 32-bit MCU. The 48-pin SSOP package provides a manageable surface-mount footprint while exposing substantial GPIO and peripheral connectivity. PSoC 3 devices combine an event-driven digital control system with configurable analog blocks such as comparators, amplifiers, and converters. Programmable routing helps connect sensors, counters, timers, serial interfaces, and interrupt-driven logic through internal resources. This architecture is particularly useful when the final pin multiplexing and analog measurement requirements are still evolving, because firmware and configuration can direct many functions without changing the external PCB. Typical uses include industrial sensor nodes, digital thermometers, motor and valve controllers, compact data-acquisition modules, consumer controls, and embedded communication equipment. The 48-pin package is appropriate for products needing many external connections without moving directly to a fine-pitch BGA or leadless package. The 8051-compatible instruction set also benefits engineers who already understand established 8-bit embedded-control workflows. When laying out the circuit, follow the pin-description table in the manufacturer datasheet and preserve the recommended decoupling and support-component arrangements. Keep sensitive analog routing away from high-current switching paths, provide a stable reference network, and confirm the exact I/O voltage limits before connecting external signals. Because the SSOP footprint has closely spaced leads, inspect pad geometry and solder-paste coverage during manufacturing qualification. This page combines the confirmed device specifications, functional guidance, application architecture, and drop-in replacement analysis in one engineering reference. It also identifies where package, pin-level, lifecycle, and certification details must be confirmed with the manufacturer before a production release.

Permintaan RFG Kontak
CY8C3444PVI-101 - 50MHz 16KB PSoC 3 MCU | Infineon
CY8C3444PVI-101

CY8C3444PVI-101 - 50MHz 16KB PSoC 3 MCU | Infineon

Infineon Technologies CY8C3444PVI-101 is an 8-bit PSoC 3 system-on-chip microcontroller with a 50 MHz operating frequency, 16 KB of flash memory, and a 3.3 V supply rating, housed in a 48-BSSOP surface-mount package with a 7.50 mm body width. A programmable system-on-chip, or PSoC, integrates a microcontroller core, programmable digital and analog resources, and configurable peripherals into one semiconductor package. The CY8C3444 belongs to the CY8C34xx family of 8051-compatible devices. This product hierarchy places the PSoC 3 platform below the broader categories of programmable system-on-chip, embedded microcontroller, and semiconductor. The principal device characteristics are a 50 MHz maximum clock, 16 KB flash organized as 16K × 8 bits, an 8-bit 8051 processor architecture, and operation from a 3.3 V supply. The 48-BSSOP package provides a surface-mount footprint approximately 0.295 inches, or 7.50 mm, wide. These figures identify the part as a compact embedded controller suitable for products requiring local programmable control and mixed signal functionality. The CY8C3444 architecture combines an embedded 8051-compatible processing core with PSoC programmable resources. This arrangement allows firmware to control digital routing and analog functions through the device's configuration fabric rather than relying exclusively on fixed peripheral blocks. The precise resource counts, converter performance, GPIO organization, and detailed electrical limits must be confirmed in the manufacturer datasheet before a production design is released. Typical uses include industrial control panels, compact sensor interfaces, building equipment, consumer controls, and embedded instruments that require programmable logic alongside a microcontroller. The surface-mount BSSOP package also supports space-conscious designs where a small PCB area and automated assembly are priorities. Firmware configuration and peripheral assignment should be completed with the manufacturer-supported PSoC development environment. Designers should preserve the 3.3 V operating condition, confirm every signal level against the manufacturer electrical characteristics, and validate the selected PSoC configuration against the application requirements. The 48-pin package also requires careful PCB planning so that power routing, decoupling, programming access, and unused pins are handled according to the device guidance. This page consolidates the available device identity, package, memory, clock, sourcing, and substitution information while separating confirmed characteristics from parameters that require validation against the manufacturer datasheet.

Permintaan RFG Kontak
CY8C3444PVI-103 - PSoC 3 8-Bit 50MHz 16KB Flash MCU | Infineon
CY8C3444PVI-103

CY8C3444PVI-103 - PSoC 3 8-Bit 50MHz 16KB Flash MCU | Infineon

The Infineon CY8C3444PVI-103 is an 8051-compatible PSoC 3 mixed-signal microcontroller in the CY8C34xx family, offering an 8-bit CPU core clocked at up to 50 MHz with 16 KB (16K x 8) of embedded flash memory in a 48-pin SSOP surface-mount package. The -103 suffix denotes the extended temperature grade ordering option, and the PVI package code identifies the lead-free 48-SSOP outline used for compact industrial and consumer control designs. A microcontroller is a programmable system-on-chip that integrates a CPU core, memory and peripherals on a single die. The PSoC 3 (Programmable System-on-Chip) family extends the classic 8051 concept with a programmable analog and digital peripheral block, capacitive-sensing capability, and on-chip resources that reduce the external discrete count in touch, control and industrial sensor nodes. In the supplier hierarchy, this device belongs to the 8-bit microcontroller class, itself part of the embedded processor and embedded systems integration family. Key differentiating specifications are the 50 MHz operating clock, which gives roughly six times the throughput of the classic 12 MHz 8051 core and allows real-time control loops to execute without offloading to external logic; the 16 KB flash program memory, which holds the application firmware plus boot and configuration data; and the 48-SSOP footprint, which keeps the board area small enough for cost-optimized multi-function panels and compact control modules. Technically, the part sits in the CY8C34xx performance range, pairing a pipelined 8051 core with a digital peripheral set and analog blocks that can be routed through programmable interconnect. Because the core is 8-bit while the clock is 50 MHz, software designers use byte-oriented architectures with code executed from flash, and the on-chip SRAM serves as the working memory for stack, buffers and peripheral descriptors. The device is also a supported target for industry-standard ISP and SWD programmers, which simplifies production programming. Typical applications include capacitive-touch control panels for white goods and industrial HMI, small motor and valve controllers, compact sensor-hub nodes, LED lighting controllers, battery-powered remote controls and low-cost USB-to-embedded bridges. In each of these the 50 MHz headroom lets one device absorb several peripheral functions that previously required separate glue logic. Design considerations center on decoupling and layout. Place the bulk and high-frequency ceramic capacitors directly at the supply pins, keep the analog supply path short and isolated from switching return currents, and route SWD programming signals away from noisy analog nets. Because flash and SRAM sizes are modest, plan the firmware partition and buffer usage early; if a design needs larger RAM or USB host support, step up to a higher-density member of the CY8C34xx family rather than adding external memory. This page consolidates distributor availability and pricing context, pin-compatible drop-in alternatives, and practical design guidance that engineers rarely find in a single place, so you can evaluate the CY8C3444PVI-103 against equivalent 8-bit MCU options before committing a layout.

Permintaan RFG Kontak
CY8C3444PVI-118 8-Bit 50MHz 8051 MCU 16KB Flash
CY8C3444PVI-118

CY8C3444PVI-118 8-Bit 50MHz 8051 MCU 16KB Flash

The Infineon CY8C3444PVI-118 is an 8-bit 8051-compatible PSoC 3 microcontroller with 16KB of flash memory, a 50MHz operating frequency, and a 1.71V to 5.5V supply range. It is packaged in a 48-SSOP form factor for compact embedded control designs requiring programmable digital and analog peripherals. The CY8C3444PVI-118 combines an 8-bit CPU core with embedded programmable blocks, allowing designers to implement control, sensing, signal conditioning, and communications functions in a compact device. A PSoC, or Programmable System-on-Chip, is a microcontroller architecture that integrates a CPU with configurable digital and analog peripheral blocks into one device. The 8051-compatible core provides a familiar instruction set and deterministic embedded-control behavior, while the programmable blocks can be adapted to functions such as timers, serial interfaces, analog conversion, and signal conditioning. This integration can reduce external discrete circuitry and simplify firmware development compared with a fixed-function MCU design. The CY8C3444PVI-118 is specified for operation from 1.71V to 5.5V, making it suitable for low-voltage industrial, consumer, appliance, and embedded-control systems. Its 16KB flash memory provides on-chip program storage, while the 50MHz maximum operating frequency supports time-sensitive control tasks and peripheral activity. The 48-SSOP package is intended for surface-mount PCB assembly and is appropriate where a compact, low-profile component is required. The PSoC 3 family uses a mixed-signal design approach in which digital and analog resources are configured through programmable registers and device configuration tools. Designers should assign resources according to the required peripherals, timing budget, analog signal levels, and external component values. Firmware configuration and application code are normally developed with the manufacturer’s PSoC design environment and programming tools, so tool support and the required peripheral configuration should be checked before committing to the device. Typical uses include sensor conditioning, motor and actuator control, industrial interface modules, consumer appliances, building equipment, and compact embedded products. The 8051-compatible architecture is particularly useful for engineers migrating from conventional 8-bit systems while retaining familiar programming concepts. The wide supply range also supports systems using regulated 1.8V, 2.5V, 3.3V, or 5V rails, although the external clock, reset, and peripheral circuits must match the selected operating conditions. For PCB implementation, route power and ground carefully, place decoupling capacitors close to the supply pins, and follow the manufacturer’s recommended pin and thermal-layout guidance. Confirm the exact SSOP footprint and exposed-pad requirements against the package drawing before release. Because this page summarizes catalog information, final production decisions should be checked against the current manufacturer datasheet and the device’s detailed electrical and timing specifications. This page provides practical sourcing context around the CY8C3444PVI-118, including its core architecture, supply range, memory configuration, package format, application fit, and engineering trade-offs. It also distinguishes exact catalog variants from broader functional replacements, helping engineers identify when a same-family option is appropriate and when a full firmware, pin, or peripheral review is required.

Permintaan RFG Kontak
CY8C3445AXA-104 - 50MHz 8051 MCU, 32KB Flash | Infineon
CY8C3445AXA-104

CY8C3445AXA-104 - 50MHz 8051 MCU, 32KB Flash | Infineon

The Infineon CY8C3445AXA-104 is an 8-bit PSoC 3 CY8C34-family microcontroller with a 50 MHz 8051 core, 32 KB of embedded flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. It combines a programmable system-on-chip architecture with microcontroller peripherals, flash-backed firmware storage, and a broad supply-voltage range of 1.71 V to 5.5 V. A PSoC microcontroller is a programmable system-on-chip that integrates a CPU core, programmable digital and analog resources, memory, and dedicated peripherals into one mixed-signal device. In the product hierarchy, the CY8C3445AXA-104 is an MCU based on the 8-bit 8051 instruction set. Its PSoC architecture allows designers to use configurable blocks for digital functions, analog conversions, and control tasks rather than relying on a fixed collection of unrelated peripheral functions. The primary operating characteristics include an 8-bit architecture, clock operation up to 50 MHz, 32 KB of flash organized as 32K x 8, and 4 KB of SRAM for the CY8C3445 family configuration. The 100-TQFP package provides a large number of external I/O connections compared with smaller microcontroller packages. The listed operating range of 1.71 V to 5.5 V supports both low-voltage and conventional 5 V system rails. The CY8C34 architecture includes a single-core 8051 processor, dual datapointers, four flash-protection levels, 1 KB of data EEPROM, 8 KB of ECC flash, and an interrupt controller with 27 sources and eight priority levels. A Peripheral Hub Unit provides eight parallel access paths, allowing programmable digital, analog, and timing resources to exchange data with the CPU without treating every function as a separate peripheral outside the hub. Typical applications include industrial control panels, compact sensor-hub controllers, keypad interfaces, LED status and signaling systems, consumer appliances, data-acquisition modules, and embedded control boards requiring a mix of digital I/O and programmable analog behavior. The large TQFP footprint is particularly useful when a design needs extensive parallel I/O rather than the smallest possible board area. When designing around the CY8C3445AXA-104, preserve the voltage ratings, oscillator requirements, programming interface, and decoupling expectations defined in the manufacturer datasheet. Because this is a mixed-signal PSoC, unused analog and digital blocks should be configured deliberately rather than left unused, and PCB routing should account for the pin arrangement and exposed power requirements of the 100-pin package. This page combines the exact ordering information, parametric context, compatible family references, and application-oriented design guidance for the CY8C3445AXA-104. It also identifies where a complete 100-pin assignment, programming procedure, and lifecycle decision require the manufacturer documentation rather than relying on abbreviated catalog summaries.

Permintaan RFG Kontak
CY8C3445AXA-108 - 8-Bit 50MHz PSoC 3 MCU | Infineon
CY8C3445AXA-108

CY8C3445AXA-108 - 8-Bit 50MHz PSoC 3 MCU | Infineon

The Infineon Technologies CY8C3445AXA-108 is an 8-bit 8051-compatible PSoC 3 programmable system-on-chip with a 50 MHz operating frequency, 32 KB of flash program memory, and a 100-lead TQFP package measuring 14 x 14 mm. It operates from 1.71 V to 5.5 V and combines a microcontroller core with programmable analog and digital resources in a single mixed-signal device. A programmable system-on-chip, or PSoC, is a mixed-signal semiconductor that integrates a microcontroller core with configurable analog blocks, digital peripherals, and routing fabric. The PSoC family extends the conventional MCU hierarchy by placing programmable signal-conditioning, conversion, and timing functions alongside the processor. This allows one configurable device to replace combinations of separate microcontroller, analog, and interface ICs. Verified device attributes include an 8051 instruction-set core, 8-bit architecture, 50 MHz maximum operating frequency, and 32 KB (32K x 8) flash memory. The 1.71 V to 5.5 V operating range supports low-voltage embedded systems, while the large 100-pin package provides extensive access to the device's analog, digital, and I/O resources. The CY8C3445 belongs to the CY8C34xx family of CY8C3xxx PSoC 3 devices. The 100-lead 14 x 14 mm TQFP package is suited to prototypes, control boards, industrial controllers, and measurement equipment that require numerous external connections. Because this device combines programmable analog and digital blocks with general-purpose control logic, firmware configuration, peripheral routing, and external component selection remain central to successful implementation. Typical uses include industrial sensor-conditioning controllers, analog measurement front ends, motor and power-system control, automotive electronic modules, and embedded human-machine interfaces. Its 50 MHz processing capability supports responsive control loops, while the 32 KB flash memory accommodates application firmware and configuration data. When designing a board around the CY8C3445AXA-108, verify the exact pin assignment and peripheral multiplexing in the manufacturer datasheet before routing signals. The wide package pin count should not be interpreted as 100 general-purpose I/O pins; many pins provide alternate analog, debug, programming, power, or clock functions. Decoupling, grounding, and unused-pin treatment must follow the manufacturer's board-layout guidance. This page consolidates verified distributor specifications, pricing references, family-level alternatives, and practical PSoC 3 design considerations so engineers can evaluate the CY8C3445AXA-108 without relying on duplicated distributor descriptions alone.

Permintaan RFG Kontak
CY8C3445AXA-181 - 50MHz 8051 MCU, 32KB Flash | Infineon
CY8C3445AXA-181

CY8C3445AXA-181 - 50MHz 8051 MCU, 32KB Flash | Infineon

The Infineon Technologies CY8C3445AXA-181 is an 8-bit PSoC 3 CY8C34xx microcontroller with a 50 MHz clock, 32 KB of embedded flash memory, 4 KB of RAM, and a 100-pin TQFP package measuring 14 x 14 mm. Its operating supply range is 1.71 V to 5.5 V, and its specified operating-temperature range is -40 °C to +85 °C. A microcontroller is an embedded-processing semiconductor that integrates a processor core, program memory, data memory, and peripherals into one device. The CY8C3445AXA-181 belongs to the PSoC 3 family and uses an 8051-compatible 8-bit architecture. It sits within the broader hierarchy of microcontroller IC, embedded processor, programmable controller, and system-on-chip. The programmable peripheral architecture allows designers to configure digital and analog functions around a shared CPU rather than relying entirely on fixed-function logic. The device combines 32 KB of flash for firmware with 4 KB of RAM for working data. Its 50 MHz operating frequency provides the timing headroom expected for embedded control, communications, and general-purpose peripheral-management tasks. The 100-pin TQFP package exposes substantially more I/O than a small microcontroller package, making it suitable for designs requiring multiple external interfaces, control signals, analog resources, or dedicated peripheral connections. The 1.71 V minimum operating voltage supports low-voltage designs, while the 5.5 V maximum accommodates standard 5 V systems. This range makes the microcontroller relevant to industrial controllers, communication modules, sensor-hub designs, and embedded automation equipment. Its operating-temperature specification of -40 °C to +85 °C covers extended commercial and industrial temperature environments where environmental qualification is important. Typical application roles include a compact supervisory controller, a communications-enabled control node, a programmable signal-conditioning system, and a peripheral bridge in industrial equipment. The 100-lead package also provides ample physical routing capacity for mixed-signal and embedded-control designs. Firmware, peripheral configuration, clocking, and low-power behavior should be evaluated together because the final power consumption depends on the selected operating mode and enabled peripherals. PCB implementation requires careful assignment of power, ground, decoupling, clock, programming, and communication signals. Place the required decoupling capacitors close to the power pins, route sensitive clock traces away from high-current switching nodes, and follow the manufacturer’s package and pin-description tables when defining the board footprint. The 14 x 14 mm TQFP package is mechanically larger than compact QFN options, but it provides easier probe access and a high pin count for mixed-signal systems. This product page organizes the known electrical, memory, environmental, and package characteristics of the CY8C3445AXA-181 together with practical selection guidance and identified drop-in alternatives. Engineers should also review the manufacturer datasheet, device errata, programming guidance, and application notes before releasing a production design or substituting a component with a different ordering code.

Permintaan RFG Kontak
CY8C3445AXE-097 - 50MHz 32KB Flash 8-Bit MCU | Infineon
CY8C3445AXE-097

CY8C3445AXE-097 - 50MHz 32KB Flash 8-Bit MCU | Infineon

The Infineon CY8C3445AXE-097 is an 8-bit PSoC 3 CY8C34xx microcontroller with a 50 MHz operating frequency, 32 KB of flash program memory, and a 100-pin TQFP package measuring 14 mm by 14 mm. It belongs to the 8051-compatible microcontroller family and is intended for embedded control applications requiring programmable digital resources, analog peripherals, and a substantial pin count. A microcontroller is a programmable semiconductor integrated circuit that executes firmware, reads inputs, controls outputs, and manages system behavior. The CY8C3445AXE-097 sits within the PSoC 3 family, combining an 8-bit 8051 processing core with programmable resources on one mixed-signal chip. This integration allows designers to implement embedded control functions without relying exclusively on external discrete components. The verified device data identifies a 50 MHz maximum clock frequency and 32 KB, or 32K x 8 bits, of flash memory. Its 100-TQFP package provides 100 physical pins and a 14 mm by 14 mm body size. These package and memory characteristics are the primary selection criteria for designs that cannot use a smaller microcontroller package or require more flash capacity than entry-level devices provide. The PSoC 3 architecture combines programmable digital blocks, analog functions, and fixed peripherals around the 8051 processor core. That mixed-signal architecture is useful in control panels, instrumentation, communications equipment, and industrial products where analog measurement, digital control, serial communication, and general-purpose processing must coexist in a compact embedded platform. Typical use cases include industrial monitoring and control, programmable logic, embedded communications, sensor acquisition, and compact consumer or appliance control systems. The 100-pin package is particularly useful when a design requires numerous general-purpose I/O connections, while the 32 KB flash allocation provides a defined code-storage budget for embedded firmware. Designers should confirm the exact peripheral mix, operating voltage range, RAM capacity, I/O ratings, clock requirements, and package drawing before committing the part to a PCB. The available verified listing does not provide those electrical details, so they must be checked in the official device documentation rather than inferred from the family name. This page combines verified distributor specifications, sourcing information, package attributes, application guidance, and explicit data gaps. It also distinguishes what is confirmed from what remains unverified, helping engineers identify the next documentation step without presenting unsupported pin, electrical, or compliance claims.

Permintaan RFG Kontak
CY8C3445AXE-107 - 8-Bit 50MHz 32KB MCU | Infineon
CY8C3445AXE-107

CY8C3445AXE-107 - 8-Bit 50MHz 32KB MCU | Infineon

Infineon Technologies CY8C3445AXE-107 is an 8-bit PSoC 3 CY8C34xx microcontroller with a 50 MHz operating frequency, 32 KB of flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. It operates from 1.71 V to 5.5 V and belongs to the CY8C34xx family of 8051-compatible embedded microcontrollers. A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripheral functions into one device. The CY8C3445AXE-107 is specifically an 8-bit MCU with an 8051 instruction-set core. In the product hierarchy, it is an MCU, then a general-purpose embedded processor, and ultimately a semiconductor designed for compact control and monitoring systems. Its 50 MHz clock rate supports faster instruction execution than lower-frequency 8-bit MCUs while retaining a compact architecture. The principal verified features of this device include 32 KB flash memory organized as 32K x 8, 8-bit processing, 50 MHz maximum operating frequency, and a 1.71 V to 5.5 V supply range. The 100-TQFP package provides 100 external connection points and is suitable for automated board assembly. These characteristics make the part applicable to embedded controls, consumer products, industrial equipment, and connected peripherals that require a modest code-memory footprint and broad supply compatibility. The CY8C3445AXE-107 combines an embedded MCU with programmable system functionality associated with the PSoC 3 family. The verified distributor description identifies the device as an 8051 PSoC 3 CY8C34xx MCU. Its operating voltage range allows integration with 1.8 V, 2.5 V, 3.3 V, and 5 V system rails when the associated clock, memory, and peripheral requirements are met. A 50 MHz operating specification provides a useful benchmark for firmware performance, interrupt latency, and peripheral timing. Typical uses include embedded control panels, sensor hubs, motor and actuator controllers, communication modules, and compact consumer appliances. The MCU can execute application firmware from its 32 KB flash memory while coordinating external sensors, communications, and power-control components. For a board-level design, engineers should verify the complete pin mapping, clock requirements, and peripheral configuration against the manufacturer datasheet before finalizing the PCB. The most important design consideration is power-rail compatibility: the accepted input range is 1.71 V to 5.5 V, so the external supply must remain within that interval under transient and tolerance conditions. Designers should also place required bypass and decoupling capacitors close to the supply pins, route clock signals away from noisy switching nodes, and preserve the component's exposed thermal-relief and soldering requirements. This page consolidates distributor availability, verified device specifications, application guidance, and pin-compatible family alternatives. The practical benefit is a concise engineering reference that distinguishes known parameters from information that still requires confirmation from the manufacturer datasheet, helping designers evaluate the CY8C3445AXE-107 before committing a PCB footprint.

Permintaan RFG Kontak
CY8C3445AXE-181 - 50MHz 32KB PSoC 3 8-bit MCU | Infineon
CY8C3445AXE-181

CY8C3445AXE-181 - 50MHz 32KB PSoC 3 8-bit MCU | Infineon

The Infineon Technologies CY8C3445AXE-181 is an 8-bit 8051-compatible PSoC 3 CY8C34xx microcontroller running at up to 50 MHz with 32 KB (32K x 8) embedded flash, supplied from a 1.71 V to 5.5 V core supply, and packaged in a 100-lead TQFP (14 x 14 mm) surface-mount package. It belongs to the PSoC 3 automotive family of programmable system-on-chip devices. A microcontroller is a single integrated circuit containing a CPU core, memory, and peripherals dedicated to embedded control tasks. The CY8C3445 sits in the embedded microcontroller hierarchy (8-bit MCU -> microcontroller -> embedded processor -> semiconductor) and, in PSoC 3, it adds a configurable array of analog and digital blocks. That array replaces the fixed-function peripherals found in older 8051 parts with programmable analog amplifiers, ADC and DAC blocks, comparators, timers, and serial interfaces that are routed by firmware rather than fixed by silicon. Key features of the CY8C3445AXE-181 include the 50 MHz 8051 core with dedicated multiplier/accumulator hardware, 32 KB of flash for program storage, a wide 1.71 V to 5.5 V operating supply range, and the PSoC 3 configurable peripheral array with its characteristic low-leakage sleep modes and fast GPIO. Because the analog blocks are programmable, one device can serve as a mixed-signal controller for touch sensing, motor drive, and signal conditioning without external analog ICs. Technically, the CY8C34xx family is built around a small-footprint 8051 core that reaches 50 MHz using a pipelined architecture with separate multiplier and divider blocks. The configurable block array is connected through a routing fabric, so peripheral placement and pin assignment are decided in the PSoC Creator design tool rather than fixed at manufacture. This is the core architectural difference versus a conventional 8051 such as the AT89C51, where timers, UARTs, and ADC channels are hard-wired to fixed pins. Typical applications include automotive body control modules, sensor-hub and condition-monitoring nodes, industrial control panels, building automation endpoints, and low-power IoT sensing nodes where the programmable analog front end reduces the bill of materials. The 100-lead TQFP footprint exposes enough GPIO and analog-capable pins to bring out multiple mixed-signal channels simultaneously. A key design consideration is that the PSoC Creator toolchain and the generated configuration data must accompany the firmware image; the on-chip configuration is programmed at boot, so field updates need to include the configuration flash content alongside the application code. Users should also confirm the exact pin multiplexing of their chosen configuration against the 100-pin TQFP pinout. This page consolidates verified distributor pricing and availability for CY8C3445AXE-181 as of 2026-10-30, pin-compatible drop-in alternatives from the same PSoC 3 family, a parameter-by-parameter comparison, and practical design notes that go beyond the manufacturer datasheet.

Permintaan RFG Kontak
CY8C3445AXI-097 - 32KB Flash 50MHz 8-Bit MCU | Cypress
CY8C3445AXI-097

CY8C3445AXI-097 - 32KB Flash 50MHz 8-Bit MCU | Cypress

The Cypress Semiconductor CY8C3445AXI-097 is an 8-bit PSoC 3 microcontroller featuring 32 kByte of embedded flash, 4 kByte of SRAM, a 50 MHz maximum operating frequency, and a 100-lead TQFP package. Designed for embedded control applications, this programmable system-on-chip combines an 8051-compatible microcontroller core with programmable digital and analog resources in one integrated device. A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller architecture that places configurable digital blocks, analog peripherals, memory, and a CPU into a single package. This integration allows product designs to consolidate functions that might otherwise require separate logic ICs, analog interface ICs, and discrete components. The CY8C3445 belongs to the CY8C34 family of PSoC 3 devices. Key features include 32 kByte of program flash, 4 kByte of SRAM, and operation up to 50 MHz. Its 100-terminal gull-wing package provides extensive external connectivity for programmable digital blocks, analog inputs and outputs, communications, timers, and general-purpose I/O. The -097 ordering code identifies a specific speed and temperature-grade configuration within the CY8C3445 family. The CY8C3445AXI-097 is based on an 8-bit 8051 MCU architecture. Its programmable blocks can be configured to implement control logic, interface functions, signal conditioning, and measurement paths, reducing the need for fixed-function peripheral ICs. The exact peripheral mix, electrical limits, pin assignments, and programming details should be confirmed in the manufacturer datasheet for the selected package and ordering code. Typical applications include industrial control panels, sensor-conditioning systems, building automation equipment, compact power converters, instrumentation front ends, and embedded consumer products. Its combination of flash, SRAM, programmable logic, and analog peripherals is particularly useful when a design requires reconfigurable control behavior rather than a fixed application-specific MCU. PCB design should begin with the 100-pin datasheet land pattern and preserve adequate copper around every power terminal. Pay particular attention to decoupling, analog grounding, external clock requirements, and programming or debug access before finalizing component placement. Because the MCU exposes many fine-pitch leads, a stable multilayer-board process and careful fanout are preferable to improvised modifications. This page consolidates the confirmed orderable configuration, package details, practical application guidance, selection criteria, and verified drop-in alternatives. It also distinguishes confirmed technical facts from specifications that require confirmation from the manufacturer datasheet, helping engineers evaluate the CY8C3445AXI-097 before committing to a PCB or production release.

Permintaan RFG Kontak
CY8C3445AXI-107 - 50MHz 32KB Flash MCU | Infineon
CY8C3445AXI-107

CY8C3445AXI-107 - 50MHz 32KB Flash MCU | Infineon

The Infineon CY8C3445AXI-107 is a PSoC 3 CY8C34xx 8-bit 8051 microcontroller operating up to 50 MHz, with 32 KB of flash program memory, 4 KB of SRAM, and a 100-pin LQFP package measuring 14 x 14 mm. It combines a single-cycle 8051 CPU core with programmable analog and digital resources for embedded control applications. A PSoC 3 microcontroller is a mixed-signal embedded controller that integrates an 8051 CPU, programmable analog blocks, digital peripherals, and configurable I/O into one device. This programmable architecture allows product designers to consolidate functions that might otherwise require separate analog, digital, and communication components, reducing board area and simplifying firmware development. The CY8C3445AXI-107 provides a 50 MHz operating speed, 32 KB of flash organized as 32K x 8, and 4 KB of SRAM. Flash supports up to 100,000 write cycles and 20 years of data retention. Up to 8 KB of flash can be used for ECC or configuration storage, while the family also supports up to 2 KB of EEPROM with 1 million write cycles. The single-cycle 8051 core executes multiply and divide instructions, making the device suitable for control loops, human-machine interfaces, and compact embedded systems. Its programmable mixed-signal architecture is particularly useful when a product requires both digital control and analog functions such as touch sensing, signal conditioning, or programmable threshold detection. Typical uses include industrial control panels, building automation modules, motor-control subsystems, low-cost capacitive-sensing products, compact instrumentation, and energy-management controllers. The 50 MHz processing rate supports responsive multitasking and time-critical peripheral control, while the 100-pin package exposes a broad set of GPIO and analog resources. PCB implementation should preserve short analog routing, provide clean grounding around sensitive inputs, and follow the manufacturer’s decoupling and pin-multiplexing guidance. Confirm the exact peripheral assignments, package dimensions, and exposed-pin requirements against the manufacturer datasheet before releasing a new layout. This product record combines the core device specifications, package identity, current sourcing options, drop-in family alternatives, and application-oriented design guidance. It also highlights differences among suffix variants so engineers can distinguish speed, packaging, and ordering options before selecting a replacement.

Permintaan RFG Kontak
CY8C3445AXI-108 - 50MHz PSoC 3 MCU | Infineon
CY8C3445AXI-108

CY8C3445AXI-108 - 50MHz PSoC 3 MCU | Infineon

Infineon Technologies CY8C3445AXI-108 is an 8-bit PSoC 3 CY8C34-series programmable system-on-chip microcontroller with a 50 MHz operating frequency, 32 KB flash memory, 4 KB SRAM, and a 100-pin TQFP package measuring 14 x 14 mm. The device combines an 8051-compatible microcontroller core with programmable digital and analog system resources, making it suitable for embedded control designs requiring more integration than a conventional microcontroller. A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller family that integrates a processor core, programmable digital blocks, analog resources, and configurable peripherals into one device. Its position in the semiconductor hierarchy is microcontroller -> programmable system-on-chip -> mixed-signal embedded controller. This integration can reduce the number of external components required when a design needs digital control, signal conditioning, data acquisition, or programmable timing. The verified device data identifies an 8-bit 8051 architecture, operation from DC to 50 MHz, 32 KB of flash, and 4 KB of SRAM. The 50 MHz maximum operating frequency provides a defined performance ceiling for timing-sensitive control tasks, while 32 KB of flash supplies embedded program storage and 4 KB of SRAM supports working memory. The operating-voltage range is 1.71 V to 5.5 V, allowing the device to operate across common low-voltage embedded systems. The CY8C3445AXI-108 is packaged in a 100-pin TQFP with a 14 x 14 mm body. This relatively high pin count provides access to the device's digital and analog resources, including external interfaces and programmable I/O paths. A 100-pin surface-mount package is more appropriate than a small-outline package when a design requires broad peripheral access or dedicated analog routing. Typical uses include industrial control modules, sensor-conditioning systems, digital power controllers, communications equipment, and compact embedded automation platforms. The PSoC architecture is particularly useful when a board must combine deterministic digital control with programmable analog acquisition or conversion. Firmware configuration determines how the available digital and analog blocks are assigned to the intended signal chain. Designers should verify the complete pin assignments, exposed power requirements, supported clock configurations, and decoupling requirements against the manufacturer datasheet before layout. Decoupling capacitors should be placed directly beside their associated supply pins, while sensitive analog inputs require short traces, controlled grounding, and separation from fast digital switching paths. Firmware and peripheral configuration must also be validated at the intended 1.71 V to 5.5 V supply conditions. This product page combines verified distributor specifications, source links, application guidance, and a conservative drop-in assessment. It explicitly distinguishes documented CY8C3445AXI-108 data from unavailable pin-level details and avoids presenting unverified cross-brand replacements as guaranteed drop-in equivalents.

Permintaan RFG Kontak
CY8C3445LTI-081 - 50MHz 8-bit USB MCU | Infineon Technologies
CY8C3445LTI-081

CY8C3445LTI-081 - 50MHz 8-bit USB MCU | Infineon Technologies

Infineon Technologies CY8C3445LTI-081 is an 8-bit PSoC 3 microcontroller with a 50 MHz maximum operating frequency, 32 KB of flash memory, 4 KB of SRAM, and USB plus serial connectivity in a 68-QFN 8 x 8 mm package. The device combines an 8051-compatible processing architecture with programmable analog and digital resources, making it suitable for embedded control designs that require more flexibility than a conventional fixed-function microcontroller. A programmable system-on-chip, or PSoC, integrates a processor core, programmable digital blocks, analog resources, and connectivity into one configurable device. Within the embedded-controller hierarchy, PSoC 3 belongs to the 8-bit microcontroller family and combines MCU operation with programmable mixed-signal capabilities. This architecture lets engineers place functions such as timers, serial interfaces, analog conversion, and control logic into a compact system while retaining the familiar 8051 instruction set. The CY8C3445LTI-081 provides 32 KB of flash, 4 KB of SRAM, 1 KB of data EEPROM, and 8 KB of ECC flash according to the verified Keil device record. It supports a maximum clock frequency of 50 MHz and includes USB plus serial connectivity, dual datapointers, four flash protection levels, 27 interrupt sources, and eight interrupt priority levels. These resources support connected consumer, industrial, and embedded-control products that need flexible I/O and mixed-signal support in a small package. The 8051 processing architecture provides a familiar development base for embedded software, while the PSoC programmable blocks allow peripheral behavior to be adapted to the product rather than relying entirely on fixed silicon functions. The verified device record identifies one Peripheral Hub Unit with eight parallel access paths. At the same time, the flash protection levels and EEPROM provide mechanisms for separating executable code from frequently updated data or application-specific parameters. Typical uses include USB-connected human-interface devices, compact industrial controllers, serial data acquisition equipment, and consumer products requiring several mixed-signal functions. The USB interface is especially useful for configuration, firmware update, logging, or direct host communication. The 32 KB flash capacity is appropriate for moderate embedded applications, while 4 KB of SRAM supports application state, buffers, and interrupt-driven control tasks. Designers should verify the exact USB electrical implementation, exposed-pin assignments, clock configuration, analog resources, and power requirements against the manufacturer datasheet before schematic release. Because the verified 68-QFN pin map is not included in the supplied source data, this page does not reproduce a potentially misleading pinout. The package drawing should also be checked against the source land pattern and exposed-pad requirements. This page consolidates verified distributor specifications, programming-oriented device details, source links, application guidance, and a constrained drop-in comparison into one engineering-oriented resource. It also distinguishes confirmed specifications from parameters that require confirmation in the manufacturer datasheet, helping designers make procurement and design decisions without inventing missing technical data.

Permintaan RFG Kontak
CY8C3445LTI-086 - 50MHz 8051 MCU | Infineon Technologies
CY8C3445LTI-086

CY8C3445LTI-086 - 50MHz 8051 MCU | Infineon Technologies

The Infineon Technologies CY8C3445LTI-086 is an 8-bit 8051-compatible PSoC 3 microcontroller operating at up to 50 MHz, with 32 KB of flash memory and a 1.71 V to 5.5 V supply range. It is housed in a 68-VFQFN package measuring 8 mm by 8 mm and incorporating an exposed pad. These parameters position the device as a compact embedded-control component for applications requiring deterministic peripheral control and moderate flash capacity. A microcontroller is a programmable semiconductor that integrates a processing core, memory, and peripherals into one device. The 8051 architecture is an established 8-bit embedded-control platform, while PSoC 3 expands the concept with programmable resources alongside conventional digital control. Within the broader semiconductor hierarchy, this device belongs to the MCU and embedded-controller category rather than a general-purpose microprocessor or DSP. The principal features visible in the manufacturer datasheet are the 50 MHz operating frequency, 32 KB flash memory organized as 32K by 8 bits, and broad 1.71 V to 5.5 V operating-voltage range. The 68-VFQFN package uses an exposed pad to support heat transfer from the device to the PCB. These characteristics make the MCU suitable for compact control boards, human-interface controllers, and embedded systems that need an 8-bit processor without a large external memory array. The CY8C3445LTI-086 belongs to the CY8C34xx microcontroller group, identified in the part description as an 8051 PSoC 3 device. Its flash-based program memory supports firmware storage in the same package as the controller. The exposed-pad construction is especially relevant in compact industrial and consumer products because thermal performance depends on the PCB copper area and solder mask layout rather than on a separate heatsink. Typical application areas include industrial keypad and panel controls, compact sensor-hub controllers, appliance interface boards, LED control systems, and general embedded automation modules. The 50 MHz clock rate provides useful headroom for interrupt-driven control and peripheral coordination, while the 32 KB flash capacity is suitable for moderate firmware sizes. Designers should confirm peripheral availability, pin multiplexing, memory-map behavior, and programming requirements against the exact datasheet before releasing a PCB. Layout planning should prioritize a continuous ground plane, short return paths for high-frequency signals, and adequate copper beneath the exposed pad. Input and output traces connected to external sensors or actuators should be kept away from sensitive clock and programming nets. Firmware development also depends on the supported programming and debug interface, so schedule device configuration, boot behavior, and peripheral initialization early in the design cycle. This page consolidates the device identity, package information, technical specifications, sourcing guidance, compatible family options, and practical design considerations into one engineering reference. It also distinguishes documented parameters from items that require confirmation with the Infineon datasheet, helping designers identify PCB and firmware decisions that must be validated before production.

Permintaan RFG Kontak
CY8C3445LTI-087 - 8-Bit 50MHz 32KB Flash MCU | Infineon
CY8C3445LTI-087

CY8C3445LTI-087 - 8-Bit 50MHz 32KB Flash MCU | Infineon

The Infineon Technologies CY8C3445LTI-087 is an 8-bit PSoC 3 CY8C34xx microcontroller with a 50 MHz 8051 core, 32 KB of embedded flash, and a 48-QFN package measuring 7 x 7 mm. It operates from 1.71 V to 5.5 V, making it suitable for low-voltage embedded systems that require compact PCB area, deterministic 8-bit processing, and integrated programmable resources. The exposed-pad package also supports improved thermal performance when the PCB provides a suitable copper heat-spreading area. A microcontroller is the central processing element of an embedded control system. It combines a CPU core, program memory, data memory, peripheral blocks, and I/O in one integrated circuit. An 8051 MCU belongs to the 8-bit microcontroller class, with an internal architecture designed for efficient control loops, human-interface input handling, and communication tasks. In the Infineon product hierarchy, the CY8C3445LTI-087 sits within the PSoC 3 CY8C34 family of mixed-signal embedded controllers. Principal features include operation up to 50 MHz, 32 KB of flash organized as 32K x 8, an 8-bit processor architecture, and a 12-bit ADC capability associated with the CY8C34 family. The wide 1.71 V to 5.5 V supply range supports both low-voltage digital systems and conventional 5 V equipment. The 48-QFN exposed-pad package reduces footprint compared with larger leaded or fine-pitch packages while improving heat spreading when correctly bonded to PCB copper. The PSoC architecture combines digital control with programmable analog and digital resources, allowing designs to use dedicated timers, serial interfaces, analog conversion, and general-purpose I/O instead of relying exclusively on discrete peripheral chips. The 8051 core provides a familiar programming model for cost-sensitive embedded products, while the 50 MHz clock rate gives designers additional performance margin for protocol handling and multi-peripheral coordination. Typical applications include industrial control panels, compact sensor-hub controllers, digital thermometers, building equipment interfaces, low-cost data-acquisition modules, and embedded human-interface systems. It is particularly suitable where a 48-QFN footprint, low-voltage operation, and flash-resident control firmware are required. Designers should confirm startup behavior, clock configuration, peripheral routing, and programming requirements against the manufacturer datasheet before releasing a PCB. For PCB design, follow the datasheet land pattern exactly and provide the exposed pad with a solder mask opening and copper pours on all layers. Keep decoupling capacitors close to the supply and ground pins, route sensitive analog signals away from high-current switching nodes, and verify thermal performance at the highest expected ambient temperature. Confirm the exact exposed-pad connection and pin functions in the pin-description table before assigning PCB nets.

Permintaan RFG Kontak
CY8C3445LTI-089 - 50MHz 8051 MCU, 32KB Flash | Infineon
CY8C3445LTI-089

CY8C3445LTI-089 - 50MHz 8051 MCU, 32KB Flash | Infineon

The Infineon CY8C3445LTI-089 is an 8-bit PSoC 3 mixed-signal microcontroller with an 8051 core, a 50 MHz maximum operating frequency, 32 KB of flash program memory, and a 48-VFQFN package measuring 7 mm by 7 mm. Its stated operating-voltage range is 1.71 V to 5.5 V, and its specified ambient operating-temperature range is -40 °C to +85 °C. The device also includes 8 KB of RAM according to its product listing. A PSoC 3 is a programmable system-on-chip, combining an embedded microcontroller core with configurable analog and digital peripheral blocks. Within the embedded-device hierarchy, it belongs to the 8-bit microcontroller family and uses an 8051-compatible architecture. This integration allows control logic, analog functions, communications, and human-interface functions to be implemented in a compact embedded system rather than requiring a separate microcontroller and several discrete support devices. The CY8C3445LTI-089 provides 32 KB of flash memory organized as 32K by 8 bits, 8 KB of SRAM, and a 50 MHz processor clock. Its communications feature set includes USB, LIN, and I2C interfaces. These interfaces make the device applicable to connected control products, industrial interfaces, human-machine interfaces, and USB-connected embedded equipment. Flash storage permits firmware to be updated after manufacture, while SRAM supports working memory for real-time control operations. The device is based on the CY8C34 family of ultra-low-power PSoC devices, whose configurable architecture allows digital functions and analog blocks to be combined according to application requirements. The family supports interrupt-driven embedded control and includes programmable resources that can replace combinations of counters, timers, communications logic, and analog interface circuitry. Peripheral configuration and firmware remain application-specific, so designers should verify the required block combinations, pin assignments, and clock settings before committing a layout. Typical uses include capacitive-touch control panels, USB-to-LIN equipment, compact industrial controllers, sensor-interface products, and consumer human-machine interfaces. The 48-VFQFN exposed-pad package supports compact board layouts and provides a thermal path to the PCB. In USB applications, firmware must also account for enumeration, power-state management, ESD protection, and the connector's bus-routing requirements. Layout planning should place decoupling capacitors close to the supply pins, connect the exposed pad to the appropriate ground plane, and keep sensitive analog and communication routes away from fast digital edges. Because no complete verified pin-name table or package drawing is published in the product record, use the pin-description table in the manufacturer datasheet when assigning tracks and programming the device. Confirm the exact exposed-pad and thermal-land pattern before fabrication. This page organizes the core electrical, memory, interface, environmental, and packaging characteristics into an engineering-focused selection reference. It also provides application guidance, sourcing questions, and design cautions that help teams evaluate the CY8C3445LTI-089 for compact 8051-based embedded designs without obscuring the differences between an exact orderable part and a broader functional equivalent.

Permintaan RFG Kontak
CY8C3445LTI-093 50MHz 32KB Flash MCU | Infineon
CY8C3445LTI-093

CY8C3445LTI-093 50MHz 32KB Flash MCU | Infineon

The Infineon CY8C3445LTI-093 is an 8-bit 8051-compatible PSoC 3 microcontroller operating at up to 50 MHz, with 32 KB of flash memory organized as 32K x 8 bits, in a 48-QFN package measuring 7 mm by 7 mm. Its stated operating-voltage range of 1.71 V to 5.5 V makes it suitable for compact embedded-control designs that need low-voltage digital operation and an external surface-mount footprint. A microcontroller is the programmable control element of an embedded system. It combines a processor core, program memory, data memory, peripherals, and I/O resources on one integrated circuit. The CY8C3445LTI-093 belongs to the PSoC 3 CY8C34xx family and uses an 8051-compatible architecture. This places it within the broader semiconductor hierarchy of embedded processors, microcontrollers, and programmable control devices. The principal specifications are a 50 MHz maximum operating frequency, 32 KB of flash program memory, an 8-bit processor architecture, and a 1.71 V to 5.5 V supply range. The flash capacity provides room for a bootloader, application firmware, configuration data, and update logic when the firmware architecture requires these functions. The 48-QFN package also supports compact board layouts while exposing a substantial pin count for mixed-signal, communication, and control connections. The -093 designation identifies the exact ordering configuration, while LTI indicates the leaded temperature and packaging characteristics associated with this commercial part. Because the device belongs to a mixed-signal microcontroller family, design decisions should cover clocking, reset behavior, programming, exposed-pin connectivity, decoupling, and firmware resource planning rather than treating it as a general-purpose logic controller. Firmware architecture should also account for real-time interrupt latency at the 50 MHz operating limit. Typical uses include compact consumer controls, industrial sensing nodes, building and access equipment, touch-oriented interfaces, communication modules, and embedded products requiring a dedicated programmable controller. The 1.71 V to 5.5 V range supports systems that operate from low-voltage regulated rails, while the 50 MHz clock and 32 KB flash allocation suit event-driven control loops and moderately structured embedded applications. Designers should derive decoupling and layout requirements from the manufacturer datasheet before schematic release. Keep the device supply path compact, provide a stable clock arrangement, verify programming access, and confirm exposed-pad connection and thermal requirements against the package drawing. Firmware should include startup, reset-cause handling, peripheral initialization, and fault-safe behavior for field-deployed equipment. This page consolidates the exact ordering characteristics, package information, operating limits, application guidance, sourcing workflow, and replacement constraints for CY8C3445LTI-093. It also distinguishes verified same-package alternatives from generic microcontrollers that may use a different footprint, pin arrangement, memory map, or peripheral configuration and therefore cannot be treated as drop-in replacements.

Permintaan RFG Kontak
CY8C3445LTI-095 - 32KB 8-Bit 50MHz PSoC | Infineon
CY8C3445LTI-095

CY8C3445LTI-095 - 32KB 8-Bit 50MHz PSoC | Infineon

Infineon Technologies CY8C3445LTI-095 is an 8-bit programmable system-on-chip microcontroller featuring a 50 MHz 8051 core, 32 KB of embedded flash memory, and a 68-pin QFN package measuring 8 mm by 8 mm. It combines a microcontroller core with programmable digital and analog resources in one integrated device, allowing compact embedded designs to consolidate control logic, sensing, and signal conditioning. A programmable system-on-chip, or PSoC, is an integrated semiconductor that places a CPU, programmable digital blocks, analog blocks, and communication peripherals within a unified device. The PSoC family occupies the microcontroller level of the broader embedded semiconductor hierarchy. By configuring hardware blocks rather than relying only on fixed peripheral functions, engineers can adapt a design to different control, measurement, or interface requirements while limiting board area and external component count. The CY8C3445LTI-095 is identified as an 8-bit MCU with an 8051-compatible core operating up to 50 MHz. Its 32 KB flash capacity provides program storage for embedded control firmware, while the 68-QFN package supports dense PCB layouts. The -095 ordering code identifies a specific speed, temperature, and package configuration, so designers should confirm the complete ordering information against the manufacturer documentation before production release. PSoC 3 devices combine programmable digital and analog functions with embedded memory and standard serial peripherals. The programmable architecture can support timing, control, data acquisition, signal conditioning, and communications tasks. Peripheral configuration is typically handled through development software, making the device suitable for applications that benefit from reusable hardware configurations and rapid adaptation without redesigning a fixed-function controller. Typical uses for the CY8C3445LTI-095 include industrial sensing and control modules, building automation endpoints, motor and power-system controllers, consumer interfaces, and compact instrumentation. Its 50 MHz processing headroom supports responsive control loops, while the 32 KB embedded flash is appropriate for compact firmware with protocol handling, state management, and application logic. PCB design should prioritize a clean supply network, decoupling near the power pins, and careful routing of sensitive analog and high-speed digital signals. The 8 mm by 8 mm QFN footprint also requires a deliberate escape strategy for its fine-pitch leads, and thermal performance should be checked against the board copper available beneath the package. Use the manufacturer pin-description and recommended-layout material when assigning tracks. This page combines the exact device identity, package information, current sourcing context, and application-oriented engineering guidance. It also identifies drop-in alternatives from the same PSoC 34xxx family and separates known device attributes from specifications that require confirmation in the manufacturer datasheet, helping engineers plan a controlled replacement or design review.

Permintaan RFG Kontak
CY8C3445PVI-077 - 8-Bit 32KB Flash PSoC 3 | Cypress
CY8C3445PVI-077

CY8C3445PVI-077 - 8-Bit 32KB Flash PSoC 3 | Cypress

The Cypress Semiconductor CY8C3445PVI-077 is an 8-bit PSoC 3 programmable system-on-chip with 32KB of embedded flash memory in a 48-BSSOP surface-mount package. It combines an 8051-compatible microcontroller core with configurable analog and digital peripheral blocks, allowing signal acquisition, processing, and control functions to be integrated into one device. The package is specified at 7.50 mm wide and 0.295 inch nominal body width. A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that places a CPU, programmable analog blocks, digital logic, and programmable I/O on a single integrated circuit. Within the semiconductor hierarchy, this device belongs to the embedded-processor and microcontroller category rather than a general-purpose logic IC or fixed-function analog component. Its configurable peripheral structure can replace several discrete analog, timer, counter, and interface functions around a conventional 8051-class controller. The CY8C3445PVI-077 belongs to the CY8C34 family documented under datasheet 001-53304. The family provides 32KB flash and 4KB SRAM, while its configurable blocks support analog-to-digital conversion, digital-to-analog conversion, timers, counters, serial communications, and programmable interrupt handling. Because the peripheral behavior is configured in firmware, engineers can adapt signal-chain functions without changing the physical PCB when requirements change. The PSoC 3 architecture combines an 8051-compatible processing core with a fabric of programmable analog and digital blocks. Analog blocks can implement functions such as amplifiers, analog buffers, comparators, and converters, while digital blocks provide timing, counters, serial communication, and programmable logic. This architecture supports deterministic embedded control while reducing the number of external components required around a microcontroller. Typical uses for the CY8C3445 family include industrial sensing and control, consumer product interfaces, instrumentation, communication modules, and compact embedded control systems. A designer can use the integrated analog resources for sensor conditioning or signal acquisition and assign programmable digital blocks to timers, communication protocols, or control functions. The primary design consideration is firmware and peripheral configuration. Before assigning pins, use the device pin-description table and package drawing in the manufacturer datasheet. Decoupling, grounding, programming-interface access, and unused input handling should follow the recommended application circuit, while clock and analog performance should be validated with the selected PSoC configuration.

Permintaan RFG Kontak