Produk (21.000+)

CY8C3445PVI-088 - 50MHz 32KB Flash MCU | Infineon
CY8C3445PVI-088

CY8C3445PVI-088 - 50MHz 32KB Flash MCU | Infineon

Infineon Technologies CY8C3445PVI-088 is an 8-bit Flash-programmable PSoC 3 microcontroller with a 50 MHz 8051 core, 32 KB of Flash memory, and a 1.71 V to 5.5 V operating-voltage range. The device is packaged in a 48-pin SSOP package. It combines programmable digital and analog resources with an embedded system-on-chip architecture in a single integrated circuit. A programmable system-on-chip, or PSoC, integrates a microcontroller core with configurable peripheral blocks on one semiconductor device. The PSoC 3 family uses an 8-bit 8051-compatible core and provides programmable resources that can support control, communication, analog measurement, and mixed-signal product designs. This system-level integration can reduce external component requirements while allowing peripheral behavior to be adapted in firmware. Key device attributes include a 50 MHz operating frequency, 32 KB of Flash program memory, and a 1.71 V to 5.5 V supply range. Flash memory supports in-system reprogramming, allowing firmware updates without removing the microcontroller from its finished assembly. The 48-pin SSOP package provides a surface-mount format suitable for compact control boards, industrial modules, and embedded products requiring more I/O than a small-lead-count package can offer. The CY8C3445 belongs to the CY8C34 family of ultra-low-power Flash-programmable PSoC 3 devices. Its configurable blocks can be assigned to digital functions, analog functions, timers, serial communication, and other mixed-signal tasks. This architecture allows a product designer to implement application-specific control logic around one microcontroller rather than relying on a fixed collection of peripheral functions. Typical uses include industrial control panels, building automation, sensor-conditioning systems, compact power-management controllers, communication equipment, and low-power embedded products. The 1.71 V minimum operating voltage supports systems with low-voltage rails, while the 5.5 V maximum operating voltage accommodates conventional 5 V industrial and consumer equipment. Firmware configuration must be checked against the system supply and clock requirements. PCB design should preserve the power, ground, decoupling, programming, and exposed signal paths defined by the manufacturer pin description. Place local supply bypass capacitors close to the device, route sensitive analog signals away from high-current switching paths, and include programming access in the board test fixture. Confirm the exact peripheral assignments, clock limits, startup behavior, and pin multiplexing in the CY8C34 family datasheet before releasing firmware. This product page combines the device's confirmed memory, frequency, voltage, core, and package characteristics with application guidance, comparison information, and engineering-focused design notes. These details support faster component selection while keeping design decisions tied to the manufacturer documentation.

Permintaan RFG Kontak
CY8C3445PVI-090 - 50MHz 32KB Flash MCU | Infineon
CY8C3445PVI-090

CY8C3445PVI-090 - 50MHz 32KB Flash MCU | Infineon

The Infineon Technologies CY8C3445PVI-090 is a PSoC 3 CY8C34-series 8-bit microcontroller with an 8051 CPU operating up to 50 MHz, 32 KB of flash memory, 4 KB of SRAM, and a 12-bit ADC in a 48-pin SSOP package. It combines a general-purpose microcontroller core with programmable digital blocks, interrupt handling, data pointers, and USB 2.0 capability for compact embedded-control designs. A PSoC, or Programmable System-on-Chip, is a mixed-signal microcontroller architecture that combines an embedded CPU with programmable digital and analog resources. The CY8C34 family belongs to the broader hierarchy of programmable system-on-chip devices, embedded microcontrollers, processors, and semiconductors. Its configurable peripherals allow engineers to implement control, measurement, communication, and timing functions without relying on a large collection of discrete components. The device provides up to 50 MHz CPU operation, 32 KB of flash program memory, and 4 KB of SRAM. The flash organization includes 1 KB of data EEPROM and 8 KB of ECC flash according to the manufacturer’s component information. The 12-bit ADC supports analog measurement, while 20 universal digital blocks provide programmable digital functions. The interrupt system supports 27 sources across eight priority levels, and two datapointers improve data movement during connected peripherals. The PSoC architecture integrates one peripheral hub unit with eight parallel access paths, allowing programmable digital blocks to exchange data efficiently. This structure is useful in control systems where deterministic signal generation, capture, filtering, or protocol handling must share processor resources. A fast USB 2.0 interface adds a practical path for firmware download, data exchange, and USB-connected peripheral functions where the selected device configuration supports the required interface. Typical uses include USB human-interface devices, industrial control panels, compact instrument controllers, sensor-conditioning systems, consumer accessories, and embedded USB products. The combination of 50 MHz processing, programmable digital logic, 12-bit conversion capability, and USB support is particularly useful when a fixed-function controller would require several separate logic and interface ICs. PCB design should preserve short analog and digital return paths, provide suitable bypass capacitance at the power pins, and follow the manufacturer’s package, pin, and reference-circuit guidance. Before firmware development, confirm the device configuration, clock setup, USB requirements, and peripheral routing in the PSoC Creator tool. The 48-pin SSOP footprint also requires adequate lead spacing for assembly and inspection. This product page consolidates the manufacturer’s device identity, distributor listings, technical feature set, application guidance, and replacement limitations. It also highlights the distinction between the exact orderable MPN, the same-device tape-and-reel suffix, and other CY8C34-family devices that may have different speed grades, temperature options, or package constructions.

Permintaan RFG Kontak
CY8C3445PVI-094 - 50MHz 8051 PSoC 3 MCU 32KB Flash | Infineon
CY8C3445PVI-094

CY8C3445PVI-094 - 50MHz 8051 PSoC 3 MCU 32KB Flash | Infineon

Infineon Technologies CY8C3445PVI-094 is an 8-bit PSoC 3 programmable system-on-chip microcontroller featuring an 8051 core operating up to 50 MHz, 32 kByte of Flash program memory, and 4 kByte of SRAM in a 48-SSOP package. It is designed for embedded control, signal acquisition, signal processing, and configurable analog-and-digital peripheral applications. The device operates from 1.71 V to 5.5 V according to the Mouser product listing, providing compatibility with low-voltage embedded systems. A PSoC, or programmable system-on-chip, is a microcontroller architecture that integrates a CPU, programmable digital blocks, configurable analog peripherals, memory, and routing resources on one device. PSoC 3 belongs to the broader embedded-microcontroller and programmable-system-on-chip hierarchy. This integration allows engineers to implement application-specific functions in hardware-like configurable blocks rather than relying only on fixed peripherals, helping reduce external component count in compact control designs. The CY8C3445PVI-094 provides 32 kByte of Flash, 4 kByte of SRAM, a 50 MHz maximum 8051-core clock, a 48-SSOP package, and an operating voltage range of 1.71 V to 5.5 V. The family also supports configurable analog and digital peripherals, flexible signal routing, a DMA controller, and interrupt-driven embedded processing. These characteristics make the device suitable for industrial instrumentation, sensor interfaces, compact control systems, communications modules, and low-power embedded products. The 8051 core provides a familiar architecture for cost-sensitive embedded designs, while PSoC 3 peripherals extend the design capability beyond a conventional fixed-function MCU. The manufacturer describes the device as supporting operation up to 50 MHz and combining programmable analog and digital resources with memory and interrupt handling. The 48-SSOP package is intended for through-hole-style leaded PCB assembly rather than a compact land-grid-array footprint. Typical applications include sensor signal conditioning, data acquisition, industrial monitoring, low-speed communication, embedded measurement, and custom control products. Engineers should verify the exact peripheral configuration, clock requirements, pin multiplexing, and programming setup in the manufacturer datasheet before finalizing a board design. A key design consideration is the 48-SSOP footprint and its relatively long leads compared with modern fine-pitch packages. Confirm that the PCB land pattern, solder assembly process, and available board area accommodate the device. For firmware development, use the PSoC Creator tooling and programming interface appropriate for the selected device family, and verify the exact pin assignments and peripheral configuration in the datasheet. This product page summarizes the key electrical, memory, package, and application characteristics of CY8C3445PVI-094 and provides practical guidance for evaluating it in embedded PSoC 3 designs. It also distinguishes verified manufacturer information from technical details that must be confirmed against the complete datasheet before layout or production release.

Permintaan RFG Kontak
CY8C3446AXA-099 50MHz PSoC 3 MCU | Infineon Technologies
CY8C3446AXA-099

CY8C3446AXA-099 50MHz PSoC 3 MCU | Infineon Technologies

The Infineon Technologies CY8C3446AXA-099 is an 8-bit PSoC 3 CY8C34xx system-on-chip microcontroller with a 50 MHz 8051-compatible core, 64 KB of embedded flash, 24 Universal Digital Blocks, and a 100-pin TQFP package measuring 14 mm by 14 mm. It integrates programmable digital resources with embedded microcontroller functionality for compact embedded control and signal-processing designs. A PSoC, or Programmable System-on-Chip, is a mixed-signal microcontroller architecture that combines a CPU with configurable digital peripherals. The PSoC family sits between a conventional microcontroller and a fixed-function application-specific integrated circuit. Its Universal Digital Blocks can be configured instead of using a fixed collection of peripherals, allowing a single device to implement different control, timing, communication, or data-processing functions. The CY8C3446AXA-099 operates from 1.71 V to 5.5 V, provides 64 KB of flash memory, and includes 24 Universal Digital Blocks. Its 50 MHz 8051-compatible processing core supports responsive embedded control, while the integrated programmable blocks reduce reliance on external logic. The device is supplied in a 100-pin TQFP package, making it appropriate for designs requiring numerous mixed-signal and digital connections. The programmable architecture separates application logic from peripheral configuration. Engineers can use the Universal Digital Blocks for functions such as counters, timers, state machines, and digital signal-processing sequences, subject to the device configuration and available resources. The integrated flash stores firmware and application code, while the 8051-compatible instruction set supports established embedded software tooling and programming workflows. Typical uses include industrial control modules, sensor-conditioning systems, compact instrument interfaces, programmable signal generators, motor-control peripherals, communication gateways, and embedded data-acquisition nodes. The combination of 50 MHz processing, 64 KB flash, and 24 programmable digital blocks is particularly useful when the board area is constrained but several independent digital functions must be consolidated. For PCB design, route sensitive analog and high-speed digital signals carefully, place decoupling capacitors close to the supply pins, and follow the manufacturer pin-assignment and grounding guidance in the CY8C34xxx datasheet. Confirm that the selected configuration tools, firmware image, programming method, and external clock requirements are supported for the intended production design. This product reference combines the manufacturer device identification, distributor specifications, ordering information, and practical integration considerations in one engineering-focused view. It also distinguishes verified drop-in ordering variants from broader family members so engineers can focus on genuine package and pin-compatible replacements.

Permintaan RFG Kontak
CY8C3446AXA-105 - 50MHz 64KB PSoC 3 MCU | Infineon
CY8C3446AXA-105

CY8C3446AXA-105 - 50MHz 64KB PSoC 3 MCU | Infineon

The Infineon CY8C3446AXA-105 is a PSoC 3 CY8C34xx programmable system-on-chip microcontroller with an 8-bit 8051 CPU, 50 MHz operating frequency, 64 KB of flash memory, and a 100-pin TQFP package measuring 14 mm by 14 mm. Its operating voltage range is 1.71 V to 5.5 V, making it suitable for embedded systems that require configurable peripherals and compact integration. A programmable system-on-chip, or PSoC, combines a microcontroller core, programmable digital and analog resources, memory, and configurable I/O in one integrated device. The CY8C34xx belongs to the PSoC 3 family, where the CPU and embedded flash provide the fundamental control platform while configurable blocks support application-specific signal conditioning, control, and interface functions. The CY8C3446AXA-105 combines a 50 MHz 8051 CPU with 64 KB of flash organized as 64K by 8 bits. Its 100-TQFP package provides 100 external connection positions for digital and analog functions, while the 1.71 V to 5.5 V supply range allows operation across low-voltage embedded systems. The related CY8C3446 family is also described by Infineon as containing 24 digital blocks, demonstrating the programmable architecture available within the family. The main technical benefit of this device is integration. Instead of using separate logic devices for control, input conditioning, and programmable peripheral functions, a designer can configure many resources in firmware. This can reduce board area and component count, although final resource assignments and performance must be checked against the manufacturer datasheet for the exact configuration being used. Typical applications include industrial control modules, programmable sensor interfaces, compact automation equipment, embedded measurement systems, and consumer or industrial products requiring a broad set of programmable I/O. The 50 MHz CPU provides a higher operating rate than the 24 MHz member referenced for the same family, while 64 KB of embedded flash supports firmware, configuration data, and application logic. PCB design should preserve the manufacturer's recommended power, decoupling, and pin-assignment requirements. Because the device has 100 package pins and combines multiple programmable functions, engineers should verify the pin configuration in the manufacturer datasheet, route sensitive analog or timing-sensitive signals away from fast digital outputs, and place bypass capacitors close to the appropriate supply pins. This page consolidates the verified product identity, electrical headline specifications, lifecycle information, drop-in alternatives, comparison data, and practical implementation guidance. It is intended to accelerate component evaluation while keeping the final design decisions tied to the official Infineon documentation.

Permintaan RFG Kontak
CY8C3446AXE-099 50MHz 64KB PSoC 3 MCU | Infineon
CY8C3446AXE-099

CY8C3446AXE-099 50MHz 64KB PSoC 3 MCU | Infineon

Infineon Technologies CY8C3446AXE-099 is an 8-bit PSoC 3 CY8C34xx mixed-signal microcontroller with a 50 MHz 8051 core, 64 KB of embedded flash memory, and a 100-pin TQFP package measuring 14 x 14 mm. The device operates from 1.71 V to 5.5 V, supports 62 I/O, and integrates programmable analog and digital resources for embedded control applications. A PSoC, or Programmable System-on-Chip, is a microcontroller architecture that combines a conventional CPU with configurable analog and digital peripheral blocks. The CY8C34xx family belongs to the broader hierarchy of embedded mixed-signal controllers, combining an 8051-compatible microcontroller core with programmable system resources. This integration allows designers to configure sensing, control, communication, and timing functions in a compact device instead of relying on numerous discrete components. The CY8C3446AXE-099 combines 64 KB flash with a 50 MHz processing core, a wide 1.71 V to 5.5 V operating range, and 62 I/O in the same 100-lead TQFP package. Its 24 universal digital blocks provide programmable logic and control functions, while the integrated analog resources support measurement and conditioning tasks. These features make the device useful in designs requiring flexible peripheral behavior, compact PCB area, and embedded control without a separate programmable logic device. The suffix AXE identifies a specific ordering configuration within the CY8C34xx family, and the -099 designation identifies the 64 KB flash configuration. The I variant and the E variant are both listed in the same 100-pin package family, but their temperature and ordering codes must be checked before substitution. Firmware portability, oscillator configuration, analog accuracy, and required operating temperature should therefore be evaluated as a complete system rather than relying on package appearance alone. Typical applications include industrial control panels, sensor nodes, programmable signal conditioners, building automation controllers, communication modules, and compact embedded test equipment. In these systems, the mixed-signal architecture can reduce component count and simplify firmware-based configuration. The 50 MHz core provides processing headroom for coordinating peripheral blocks, applying calibration, and supervising real-time control tasks. The primary design consideration is the 1.71 V to 5.5 V supply range and its effect on clocking, analog references, and communication interfaces. Designers should preserve the required decoupling network, route sensitive analog inputs away from fast-switching nodes, and validate startup and shutdown behavior across the intended voltage range. The 100-pin TQFP footprint also requires careful fanout planning because its lead pitch is substantially finer than a typical dual-inline package. This product record combines exact ordering information, verified distributor listings, package details, technical comparisons, and application-focused design guidance. It is intended to help engineers identify the correct CY8C34xx configuration, plan a pin-compatible procurement decision, and understand where the device's programmable mixed-signal resources can reduce external circuitry.

Permintaan RFG Kontak
CY8C3446AXE-115 - 50MHz 8-Bit PSoC 3 MCU | Infineon
CY8C3446AXE-115

CY8C3446AXE-115 - 50MHz 8-Bit PSoC 3 MCU | Infineon

The Infineon Technologies CY8C3446AXE-115 is an 8-bit PSoC 3 CY8C34xx family microcontroller with a 50 MHz 8051 core, 64 KB of flash memory and a 100-lead TQFP package. It operates from 1.71 V to 5.5 V, making it suitable for embedded control, industrial interface and sensor-conditioning applications. The device combines programmable digital logic and analog peripherals in one integrated mixed-signal controller. A programmable SoC, or system on chip, places a microcontroller core, programmable logic blocks, analog conversion resources and specialized peripherals into one device. The PSoC 3 architecture extends the basic 8-bit processing role of a conventional microcontroller with configurable digital blocks and analog functions that can simplify signal acquisition, filtering and control-board designs. The CY8C3446AXE-115 provides 64 KB of flash for program storage and operates at up to 50 MHz. The listed operating voltage range of 1.71 V to 5.5 V supports low-voltage battery-powered systems as well as conventional 3.3 V and 5 V rails. The CY8C34xx family also includes 24 universal digital blocks, a resource for implementing counters, state machines, timing functions and other deterministic logic without loading the main processor. The 100-pin TQFP package provides substantially more I/O than a small-lead-count microcontroller, allowing more sensors, actuators and communication peripherals to be connected directly. Its 14 mm by 14 mm body is appropriate for industrial controllers, instrumentation, motor-control modules and compact human-machine interface boards where routing density and external connectivity are priorities. Because a PSoC 3 device relies on configurable peripherals, firmware and device configuration are central to the design process. A new board should be evaluated with the vendor configuration tool, and the application should be checked against the exact peripheral set and pin assignments documented for the selected package variant. When planning a PCB, allocate decoupling and analog grounding according to the manufacturer recommendations, preserve the configuration-programming path, and verify unused pins for analog-capable functions. The 100-lead footprint also requires careful fanout and a stable thermal design at elevated clock rates. This page combines the key catalog specifications, package details, family-level alternatives, application guidance and design notes for engineers evaluating the CY8C3446AXE-115 as a mixed-signal embedded controller.

Permintaan RFG Kontak
CY8C3446AXI-098 - 50MHz 8-Bit PSoC 3 MCU | Infineon
CY8C3446AXI-098

CY8C3446AXI-098 - 50MHz 8-Bit PSoC 3 MCU | Infineon

The Infineon CY8C3446AXI-098 is an 8-bit PSoC 3 CY8C34xx programmable system-on-chip microcontroller with an 8051 core, 50 MHz operating frequency, 64 KB of embedded flash memory, and a 100-pin TQFP package measuring 14 mm by 14 mm. It combines a programmable embedded microcontroller with configurable analog and digital resources for compact embedded-control designs. A PSoC, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates a CPU, programmable digital blocks, analog blocks, and programmable I/O into one device. The CY8C34xx family belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and semiconductor categories. This integration can reduce the number of discrete components needed when a product requires both control logic and configurable signal conditioning. The CY8C3446AXI-098 provides a maximum listed clock frequency of 50 MHz and 64 KB, or 64K × 8 bits, of flash memory. Its 8-bit CPU architecture is suited to embedded products requiring deterministic peripheral control, state-machine execution, communication handling, and low-cost system integration. The 100-pin TQFP-100 package also offers substantially more external connection options than smaller microcontroller packages. The PSoC architecture differentiates this device from a conventional fixed-function 8-bit MCU through its configurable analog and digital blocks. Designers can allocate internal resources according to the application rather than relying exclusively on a fixed peripheral arrangement. This makes the device useful for products combining digital control with functions such as signal generation, measurement, interface adaptation, or general-purpose mixed-signal processing. Typical uses include industrial control modules, sensor-conditioning systems, consumer interfaces, communication equipment, and compact embedded products. The 50 MHz operating rate provides useful execution headroom for protocol handling and coordinated peripheral activity, while the 64 KB flash capacity supports a substantial application program. System designers should still budget memory for the boot code, interrupt service routines, configuration data, and application logic. For PCB design, use the manufacturer pin description and package drawing to assign all 100 signals and to place decoupling capacitance close to the supply pins. Confirm the intended clock source, programming interface, reset behavior, and unused-pin treatment in the manufacturer documentation before layout release. Because PSoC peripherals are configuration-driven, the final firmware and device configuration are integral parts of the hardware design. This product overview combines the ordering information, memory and clock characteristics, package data, replacement analysis, and practical design considerations needed to evaluate the CY8C3446AXI-098 for an embedded mixed-signal design.

Permintaan RFG Kontak
CY8C3446AXI-105 - 50MHz 8051 PSoC 3 MCU | Infineon
CY8C3446AXI-105

CY8C3446AXI-105 - 50MHz 8051 PSoC 3 MCU | Infineon

The Infineon Technologies CY8C3446AXI-105 is an 8-bit 8051 PSoC 3 programmable system-on-chip MCU operating up to 50 MHz, with 64 kB of flash memory and 24 configurable digital blocks in a 100-pin TQFP package measuring 14 x 14 mm. It supports a 1.71 V to 5.5 V operating range and an industrial ambient temperature range of -40 °C to 85 °C. A PSoC, or programmable system-on-chip, combines a microcontroller core, memory, configurable digital and analog peripherals, and programmable interconnect resources on one integrated device. The PSoC 3 architecture belongs to the broader embedded MCU and system-on-chip hierarchy, allowing a compact design to replace combinations of a CPU, programmable logic, interface logic, and discrete peripheral devices. This integration can reduce board area while preserving software-configurable functionality. The CY8C3446AXI-105 includes 8 kB of SRAM, 2 kB of data EEPROM, and 8 kB of ECC flash according to the manufacturer device documentation. Its 24 digital blocks provide configurable logic resources, while the dual datapointers, DMA controller, and peripheral hub support efficient transfers between memory and peripherals. The device also provides interrupt handling with 27 sources and 8 priority levels. Power-management options include active, sleep, and hibernate operating modes. The device consumes 1.2 mA at 6 MHz and 12 mA at 48 MHz in active mode, while sleep current reaches 200 nA. Its boost-regulator capability supports operation from a 0.5 V input when the appropriate external configuration is used, and the device can organize up to six power domains for selective peripheral control. Typical applications include industrial control panels, compact data-acquisition modules, mixed-signal instruments, programmable automation interfaces, embedded sensor-conditioning systems, and low-power control products. The combination of an 8051 CPU, configurable digital blocks, wide voltage range, and numerous GPIO functions is particularly useful when a design needs deterministic control alongside flexible peripheral routing. PCB design should follow the manufacturer pin and layout guidance, with particular attention to exposed supply, ground, programming, and decoupling connections. Power-domain assignments should be reviewed carefully to prevent unintended peripheral activity or sequencing conflicts. Firmware, startup behavior, clock configuration, and low-power transitions should be validated together because peripheral state and clock changes can affect the complete embedded design. This product overview combines device characteristics with practical selection, replacement, power-management, and design guidance. It also distinguishes exact package-compatible ordering variants from functional substitutes, helping engineers assess PCB reuse and migration risk before committing to a hardware revision.

Permintaan RFG Kontak
CY8C3446AXI-115 - 50MHz 64KB 8051 MCU | Infineon
CY8C3446AXI-115

CY8C3446AXI-115 - 50MHz 64KB 8051 MCU | Infineon

The Infineon CY8C3446AXI-115 is an 8-bit PSoC 3 CY8C34xx-family microcontroller with a 50 MHz 8051 core, 64 KB of embedded flash, a 1.71 V to 5.5 V operating-voltage range, and a 100-pin TQFP package measuring 14 x 14 mm. It combines programmable digital and analog resources with a conventional embedded-control architecture, making it suitable for designs that require both microcontroller control and configurable peripheral functions. A PSoC 3 is a programmable system-on-chip that integrates an embedded microcontroller core with user-programmable digital blocks, analog blocks, and dedicated peripherals. Within the broader semiconductor hierarchy, this device belongs to the microcontroller and embedded-processing category rather than a general-purpose logic IC. Its 8051-compatible core provides a familiar execution environment for industrial control, consumer equipment, and compact embedded products. The principal device characteristics are a 50 MHz operating frequency, 64 KB of flash program memory, and support for supply voltages from 1.71 V through 5.5 V. Related CY8C3446 family listings identify the family with 24 universal digital blocks, while the package configuration is a 100-pin TQFP. This combination permits designers to consolidate control logic and configurable functions without relying on a separate high-performance processor for straightforward peripheral management. The 8051 core operates from an 8-bit instruction architecture while the PSoC programmable fabric allows application-specific functions to be integrated around it. Flash memory provides nonvolatile program storage, while the operating-voltage range supports low-voltage system rails as well as conventional 3.3 V and 5 V equipment. The 100-pin package exposes substantially more interface options than a small microcontroller package, which is useful when a design requires numerous external connections. Typical application areas include industrial control modules, instrumentation, interface controllers, power-system monitoring, consumer peripherals, and compact embedded products. The 50 MHz clock supports timely peripheral handling and structured control tasks, while the 64 KB flash capacity provides room for application firmware, configuration data, and boot routines. The broad supply-voltage range also makes the device useful in systems whose rails vary according to load or system mode. Designers should treat the 100-pin TQFP footprint and device pin functions as the primary PCB constraints. Decoupling, ground distribution, programming access, clock implementation, and unused-pin handling must follow the manufacturer's package guidance. Firmware should also be tested across the intended voltage range because timing, peripheral behavior, and configuration requirements can change with operating conditions. This page consolidates the exact device identity, electrical envelope, package information, qualified same-family alternatives, comparison parameters, and practical integration guidance. It is designed to help engineers locate the correct datasheet, evaluate replacement options, and plan a board-level design without mixing different package or programming assumptions.

Permintaan RFG Kontak
CY8C3446LTI-071 - 50MHz 64KB 8051 MCU | Infineon
CY8C3446LTI-071

CY8C3446LTI-071 - 50MHz 64KB 8051 MCU | Infineon

Infineon Technologies CY8C3446LTI-071 is an 8-bit PSoC 3 CY8C34xx microcontroller with an 8051 CPU, a 50 MHz maximum clock frequency, 64 kByte of flash memory, and 8 kByte of SRAM in a 48-QFN package measuring 7 mm by 7 mm. The device operates from 1.71 V to 5.5 V, making it suitable for compact embedded systems that require flexible digital control, serial communications, and programmable peripheral functionality. A programmable system-on-chip combines a microcontroller core with configurable digital and analog resources on one integrated circuit. The PSoC architecture places an 8051-compatible CPU, flash, SRAM, programmable logic blocks, and programmable peripherals within a unified embedded platform. This integration allows designers to tailor functions around an application instead of relying on a fixed collection of discrete peripheral functions. The CY8C3446LTI-071 provides 64 kByte of flash organized as 64K by 8 bits and 8 kByte of SRAM. Its 50 MHz maximum operating frequency supports deterministic control-loop execution and responsive serial-data handling. A 1.71 V to 5.5 V operating-voltage range supports integration across low-voltage digital systems, while the 48-QFN surface-mount package reduces board area compared with larger leaded packages. The CY8C34xx family is positioned for embedded applications that benefit from configurable peripherals and programmable signal conditioning. The 8051 instruction architecture and compact 48-QFN footprint make the device suitable for control boards, interface modules, sensor nodes, and industrial equipment. The exposed-pad construction also provides a thermal and electrical path into the PCB when the package is soldered according to the manufacturer land pattern. Typical uses include building a programmable communications controller, a digital sensor-hub interface, an industrial control module, a keypad and display controller, a power-sequencing controller, and a general-purpose embedded data-acquisition node. The 64 kByte flash capacity allows firmware and configuration data to be stored on-chip, while the 8 kByte SRAM supports working memory for protocol stacks and real-time control routines. PCB implementation should follow the manufacturer package drawing for the 48-QFN footprint, including the exposed thermal pad, pad dimensions, and solder-mask settings. Place decoupling capacitors close to the appropriate power pins and provide a low-impedance ground connection. Firmware configuration, peripheral assignment, and clock-tree settings should be reviewed against the manufacturer programming documentation before production release. This page combines the principal device specifications, commercial sourcing information, same-family drop-in candidates, and practical implementation guidance. It also distinguishes verified product characteristics from parameters that require confirmation in the manufacturer package drawing or device documentation, helping engineers qualify the CY8C3446LTI-071 for embedded-product designs.

Permintaan RFG Kontak
CY8C3446LTI-072 - 50MHz 8-Bit PSoC 3 MCU | Infineon
CY8C3446LTI-072

CY8C3446LTI-072 - 50MHz 8-Bit PSoC 3 MCU | Infineon

The Infineon CY8C3446LTI-072 is an 8-bit PSoC 3 CY8C34xx microcontroller with an 8051 CPU, a maximum clock frequency of 50 MHz, and 64 KB of embedded flash memory in a 68-QFN package measuring 8 mm by 8 mm. It combines programmable digital and analog resources with embedded microcontroller functionality for compact embedded-control designs. A programmable system on chip, or PSoC, integrates a CPU, programmable digital blocks, analog peripherals, and memory into one device. The PSoC 3 architecture places the CY8C34xx family in the broader hierarchy of embedded microcontroller, embedded processor, and semiconductor. This integration allows designers to configure digital logic and analog functions while retaining deterministic firmware-controlled behavior in compact industrial, consumer, communications, and control systems. The key device characteristics visible in the product listing include an 8051 CPU core, 8-bit processing, a 50 MHz maximum operating frequency, and 64 KB, or 64K by 8 bits, of flash memory. The package is identified as 68-QFN with an 8 mm by 8 mm body and exposed-pad construction. These details make the device suitable for applications requiring substantial flash-based firmware storage and relatively fast control-loop execution. PSoC 3 devices are designed for embedded applications that benefit from configurable peripherals and integrated mixed-signal control. The 8051 CPU architecture supports a familiar embedded programming model, while flash storage provides room for application code, configuration data, and boot or update logic. The exact peripheral inventory, supply-voltage limits, memory map, operating-temperature range, and electrical timing characteristics must be confirmed from the manufacturer ordering information and device documentation before a circuit is released. Typical design roles include sensor acquisition and conditioning, industrial control panels, communication equipment, consumer interfaces, and compact embedded systems that combine digital control with analog signal paths. System designers should treat the exposed thermal pad as part of the electrical and thermal design. Adequate ground-plane connection, low-impedance supply routing, and stable decoupling are especially important when the device operates near its maximum clock frequency. For a new PCB, use the manufacturer package drawing and pin-description table rather than relying on generic QFN conventions. Confirm the exposed-pad connection, programming interface, oscillator requirements, and all peripheral multiplexing before component placement. For an existing 68-QFN design, verify every pin function and the target variant's ordering codes before substituting another PSoC 3 device. This page consolidates the verified product identity, capacity and frequency details, package information, sourcing paths, cross-reference findings, and engineering guidance needed to evaluate the CY8C3446LTI-072 for an embedded-control design.

Permintaan RFG Kontak
CY8C3446LTI-074 50MHz 64KB Flash PSoC 3 | Infineon
CY8C3446LTI-074

CY8C3446LTI-074 50MHz 64KB Flash PSoC 3 | Infineon

Infineon Technologies CY8C3446LTI-074 is an 8-bit PSoC 3 programmable system-on-chip with a 50 MHz 8051 CPU, 64 KB flash memory, 8 KB SRAM, and a 68-QFN 8 x 8 mm package. It combines programmable digital peripherals with analog and memory resources in a compact system-on-chip, making it suitable for embedded control applications requiring more flexibility than a conventional fixed-function microcontroller. A programmable system-on-chip, or PSoC, is a mixed-signal microcontroller architecture that integrates a CPU with configurable digital blocks, analog conversion functions, and specialized peripherals. Within the semiconductor hierarchy, the CY8C3446LTI-074 is a microcontroller, a programmable controller, and a system-on-chip device. Its PSoC architecture allows designers to use programmable blocks for digital functions while retaining analog peripherals such as ADCs, DACs, comparators, and programmable gain amplifiers. The device operates with an 8051 CPU at up to 50 MHz and includes 64 KB of flash program memory, 8 KB of SRAM, 2 KB of data EEPROM, and 8 KB of ECC flash. Its peripheral hub provides eight parallel access paths, while 24 universal digital blocks support configurable digital logic and communication functions. The device also includes a configurable ADC unit, two data pointers, an interrupt system with 27 sources and eight priority levels, and four flash protection levels. The 68-QFN package measures 8 x 8 mm according to distributor listings, supporting compact PCB layouts in consumer, industrial, communications, and control equipment. Its 1.71 V to 5.5 V operating range permits operation from common low-voltage digital rails. The integrated programmable resources can reduce the number of discrete components needed for control, signal conditioning, and communication tasks, although the exact peripheral assignments and available divider, timer, and communication configurations must be confirmed in the manufacturer datasheet. Typical applications include industrial control panels, building automation modules, sensor-conditioning systems, motor and actuator controllers, low-cost data loggers, and compact communications equipment. The combination of 64 KB flash, 8 KB SRAM, 24 universal digital blocks, and analog peripherals supports applications that need both deterministic embedded control and flexible signal acquisition. Software can configure many peripherals, simplifying product variation without changing the PCB. When designing a board around the CY8C3446LTI-074, verify the exposed-pad and QFN assembly requirements, provide all specified bypass capacitors, and confirm the exact pin multiplexing in the device datasheet. Programming, clocking, and low-power behavior should also be validated with the current Cypress or Infineon PSoC Creator tooling before production release. This page consolidates verified distributor specifications, package details, procurement information, and practical design guidance for engineers evaluating the CY8C3446LTI-074. It also distinguishes directly documented PSoC 3 family variants from unsupported cross-package substitutions, helping BOM decisions remain grounded in available technical evidence.

Permintaan RFG Kontak
CY8C3446LTI-075 - 50MHz 64KB Flash 8-Bit MCU | Infineon
CY8C3446LTI-075

CY8C3446LTI-075 - 50MHz 64KB Flash 8-Bit MCU | Infineon

The Infineon Technologies CY8C3446LTI-075 is an 8-bit PSoC 3 CY8C34xx programmable system-on-chip microcontroller with a 50 MHz maximum CPU frequency, 64 KB of embedded flash memory, and 8 KB of SRAM, housed in a 48-QFN package measuring 7 mm by 7 mm. The device combines an 8051-compatible core with programmable analog and digital resources for embedded control applications. A programmable system-on-chip is a microcontroller architecture that integrates conventional CPU, memory, programmable digital blocks, analog blocks, and communication peripherals into one device. The PSoC 3 family belongs to the broader hierarchy of 8-bit microcontroller, embedded processor, and semiconductor categories. Its programmable resources allow peripheral functions to be adapted at design time while retaining the familiar embedded software-development model. The CY8C3446LTI-075 provides 64 KB of flash for program storage, 8 KB of SRAM for working memory, and operation up to 50 MHz. Its listed interfaces include I2C, SPI, UART, USART, EBI/EMI, and USB. The 48-QFN package supports compact, space-constrained designs while exposing 25 I/O according to the product listing. Its 1.8 V to 5.5 V operating range accommodates both 3.3 V and 5 V system environments. The 8051-compatible instruction set supports a broad embedded-software ecosystem, while the PSoC architecture adds configurable digital and analog functions rather than relying entirely on fixed peripherals. The 50 MHz operating limit provides additional processing headroom for control loops, communication handling, and state-machine workloads. Designers must still observe the electrical, clock, decoupling, and exposed-pad requirements specified in the manufacturer datasheet. Typical uses include industrial control modules, consumer interfaces, USB-connected accessories, serial bridges, compact sensor nodes, and embedded systems requiring several communication formats in one package. The combination of flash, SRAM, USB, and mixed serial interfaces is particularly useful when board space and component count are more important than high-performance 32-bit processing. Place the decoupling capacitors close to the power and ground pins, provide a clean clock source, and connect the exposed thermal pad to the PCB ground plane according to the land-pattern guidance. Confirm pin multiplexing, USB electrical requirements, programming access, and the selected peripheral configuration before releasing the PCB layout. This page combines the manufacturer product description with package, memory, interface, and ordering information, then adds practical selection, comparison, and implementation guidance for engineers evaluating the CY8C3446LTI-075 in embedded designs.

Permintaan RFG Kontak
CY8C3446LTI-083 - 50MHz 8-Bit PSoC 3 MCU | Infineon
CY8C3446LTI-083

CY8C3446LTI-083 - 50MHz 8-Bit PSoC 3 MCU | Infineon

The Infineon CY8C3446LTI-083 is an 8-bit PSoC 3 system-on-chip microcontroller with an 8051 CPU, 50 MHz maximum operating frequency, 64 KB of flash memory, and a 48-QFN 7 x 7 mm package. It operates from 1.71 V to 5.5 V and combines programmable digital and analog resources with USB and serial connectivity. The device is positioned as a low-power embedded-control platform for industrial, consumer, motor-drive, motion-control, and connected peripheral designs. A PSoC, or Programmable System-on-Chip, is a microcontroller architecture that integrates a CPU with configurable peripheral blocks. In the CY8C34 family, the 8051 CPU executes firmware while programmable digital blocks support timing, serial protocols, control functions, and general-purpose logic. Analog resources can be used for signal conditioning and measurement, reducing the need for separate peripheral ICs when the application can be mapped into the device's programmable fabric. Key verified features of the CY8C3446LTI-083 include an 8-bit 8051-compatible processor, 50 MHz maximum clock operation, 64 KB flash, 8 KB SRAM, and operation from 1.71 V to 5.5 V. The family documentation also identifies 2 KB of data EEPROM, four flash protection levels, eight interrupt sources, eight priority levels, and one Peripheral Hub Unit with eight parallel access paths. These characteristics make the device suitable for designs requiring flexible peripheral allocation, embedded flash storage, and mixed control connectivity. The CY8C34 family's configurable blocks distinguish it from a conventional fixed-peripheral microcontroller. Designers can allocate digital resources according to system timing and communication requirements instead of selecting a device solely from a fixed block map. The result is a compact system-level solution for control boards, sensor interfaces, USB-connected products, and motor-drive or motion-control applications. The 48-QFN package also supports compact PCB layouts, although exposed-pad thermal management must be considered during layout. Typical uses include USB and serial connectivity in embedded peripherals, industrial measurement and control systems, consumer interfaces, and motor-control or motion-control platforms. The 1.71 V minimum operating voltage supports low-voltage system rails, while the 5.5 V maximum provides compatibility with conventional 5 V powered equipment. Firmware and peripheral configuration should be validated against the family's complete datasheet and the selected development kit before production release. When designing a board around the CY8C3446LTI-083, verify the exact package pinout, exposed-pad connection, supported I/O voltage, USB implementation requirements, and programming interface in the manufacturer documentation. Use the device's low-power operating modes when appropriate, but confirm wake-up behavior and active-state current against the actual system workload. USB-connected or motor-control designs also need careful grounding, filtering, and signal-integrity planning. This product summary consolidates verified distributor specifications, the available same-family cross-reference, and practical engineering guidance into one searchable reference. It is intended to help engineers evaluate the CY8C3446LTI-083 for embedded control, USB, serial, and motion-control designs without treating a nearby family member as an automatic substitute.

Permintaan RFG Kontak
CY8C3446LTI-084 - 8-Bit 50MHz PSoC 3 MCU | Infineon
CY8C3446LTI-084

CY8C3446LTI-084 - 8-Bit 50MHz PSoC 3 MCU | Infineon

Infineon CY8C3446LTI-084 is an 8-bit PSoC 3 microcontroller with a 50 MHz 8051 CPU, 64 KB of embedded flash memory, and 8 KB of SRAM, packaged in a 68-pin QFN measuring 8 mm by 8 mm. It combines an embedded MCU core with programmable analog and digital blocks in one mixed-signal device, allowing compact control designs without relying on separate analog ICs for common interface functions. A programmable system-on-chip is a mixed-signal semiconductor that integrates a microcontroller, analog converters, comparators, timers, and programmable digital logic into one package. The PSoC 3 family places these resources behind configurable peripherals, so a designer can adapt signal acquisition, conditioning, and control behavior to an application instead of fixing every function in dedicated silicon. This places the CY8C3446LTI-084 within the hierarchy of embedded controllers, mixed-signal microcontrollers, and programmable system-on-chip devices. Three headline characteristics define the device: its 50 MHz maximum CPU clock, 64 KB flash program memory, and 8 KB SRAM. The 8051-based processor provides a familiar instruction set while the PSoC architecture adds configurable analog and digital peripherals. The 1.71 V to 5.5 V operating range supports both 3.3 V and 5 V system rails, and the listed 25 I/O provide connections for sensors, actuators, communications, and control signals within a compact 8 mm by 8 mm footprint. The 64 KB flash provides on-chip program storage for firmware, while the 8 KB SRAM holds working data, stack state, and peripheral buffers. The 50 MHz clock supports faster control loops and time-sensitive digital functions than lower-clock 8-bit systems. The exact divider, timer, ADC, DAC, comparator, and GPIO configuration available to a specific design should be confirmed against the device datasheet because PSoC peripheral assignments are selected through device configuration rather than through a fixed external pin map. Typical uses include industrial sensor controllers, building and access-control modules, compact motor-control boards, digital potentiometer and analog-interface designs, and low-cost consumer products with a small number of mixed-signal I/O functions. Its small QFN package also suits densely populated control boards where component area is limited. Designers should confirm that the exposed-pad connection and thermal requirements are compatible with the PCB stack-up and assembly process. When planning a PCB layout, place decoupling capacitors close to the supply pins, route sensitive analog inputs away from fast-switching nodes, and follow the manufacturer's recommended exposed-pad land pattern. Because a mixed-signal device can combine sensitive analog functions with digital peripherals, grounding, isolation between analog and digital return paths, and stable reference routing can be as important as the pin assignment itself. This page consolidates the key device characteristics, ordered-family alternatives, package details, application guidance, and practical PCB considerations into one engineering reference. It is designed to support initial component selection and board planning while directing final verification to the manufacturer datasheet for the exact ordering code, temperature grade, pin multiplexing, and electrical limits.

Permintaan RFG Kontak
CY8C3446PVI-076 - 50MHz 8051 PSoC 3 MCU | Cypress
CY8C3446PVI-076

CY8C3446PVI-076 - 50MHz 8051 PSoC 3 MCU | Cypress

The Cypress Semiconductor CY8C3446PVI-076 is an 8-bit PSoC 3 programmable microcontroller with an 8051 core operating up to 50 MHz, 64 KB of flash memory, and a 48-SSOP package. It operates from 1.71 V to 5.5 V and integrates a 12-bit ADC, USB, serial connectivity, timers, and PWM resources for compact embedded control systems. A PSoC 3 is a mixed-signal microcontroller that combines an embedded CPU with programmable digital blocks and configurable analog peripherals on one chip. Its place in the embedded hierarchy is between a general-purpose microcontroller and a dedicated application-specific controller. This integration allows designers to implement sensing, control, communication, and data acquisition in one device while reducing the number of external discrete components. The CY8C3446PVI-076 provides 64 KB of flash, 8 KB of SRAM, 2 KB of data EEPROM, 24 universal digital blocks, and eight flash protection levels. Its dual Datapointer architecture, 27 interrupt sources with eight priority levels, and configurable ADC unit make it suitable for real-time control, industrial interfaces, USB-connected peripherals, and compact consumer products. USB and serial connectivity broaden its usefulness for configuration, data transfer, and external control. The device combines an 8051-compatible processing architecture with programmable digital peripherals and a 12-bit ADC. The universal digital blocks can support timers, counters, serial interfaces, and communication functions, while the peripheral hub provides eight parallel access paths for efficient data movement. This architecture gives designers more configuration flexibility than a fixed-function 8-bit MCU while retaining a familiar 8051 programming model. Typical uses include USB data acquisition, touch-controlled interfaces, motor and actuator control, compact power conversion, industrial sensing modules, and USB-connected human-interface devices. The 48-SSOP package supports space-constrained designs, although its fine-pitch leads require careful PCB layout and assembly planning. The 1.71 V minimum operating voltage also permits operation across low-voltage embedded systems. Designers should check the pin-description table, power requirements, clock requirements, and recommended decoupling in the manufacturer datasheet before assigning PCB tracks. A 48-SSOP footprint has tightly spaced leads, so inspect paste, solder mask, and assembly tolerances carefully. USB signal routing also requires controlled impedance and a clean connection between the transceiver, protection network, and connector. This page consolidates the part identity, electrical characteristics, package information, sourcing questions, and application guidance into an engineering-focused reference. It also distinguishes documented same-family alternatives from functional equivalents, helping designers determine whether a candidate requires only schematic verification or a broader PCB and firmware migration.

Permintaan RFG Kontak
CY8C3446PVI-082 50MHz 64KB 8-Bit PSoC 3 MCU | Infineon
CY8C3446PVI-082

CY8C3446PVI-082 50MHz 64KB 8-Bit PSoC 3 MCU | Infineon

The Infineon CY8C3446PVI-082 is an 8-bit PSoC 3 system-on-chip with a 50 MHz 8051-compatible core, 64 KB of embedded flash, and a 1.71 V to 5.5 V operating-voltage range. The microcontroller is supplied in a 48-pin SSOP package with gull-wing leads and an industrial temperature grade, making it suitable for compact embedded control systems that require programmable analog and digital resources. A programmable system-on-chip is a category of microcontroller that integrates a CPU, flash memory, analog conversion functions, programmable digital blocks, and communication peripherals into one device. Within the embedded-control hierarchy, the CY8C3446 belongs to the PSoC 3 family, which combines an 8051-compatible embedded core with configurable analog and digital peripheral blocks. This integration can reduce the number of separate components needed for sensing, control, and communication. Key characteristics of the CY8C3446PVI-082 include a maximum core frequency of 50 MHz, 64 KB of flash memory, and an operating supply range of 1.71 V to 5.5 V. The device is identified as an industrial-temperature component and is offered in a 48-terminal rectangular SSOP package. These features position it for embedded products that require a compact package, broad supply-voltage support, and a dedicated 8-bit control architecture. The 50 MHz 8051-compatible core provides dedicated processing for firmware-driven control tasks, while embedded flash retains program code without an external memory component. The PSoC architecture is particularly useful when a design needs both digital control and analog measurement. Engineers can configure supported peripheral functions rather than relying on a fixed combination of application-specific integrated peripherals, although final peripheral availability and configuration limits must be checked in the manufacturer datasheet. Typical applications include industrial sensor controllers, building and environmental monitoring systems, compact consumer-control products, programmable instrumentation, motor-support circuitry, and low-voltage embedded products. The 1.71 V minimum operating voltage is useful for battery-derived systems, provided the complete design operates within the device's specified electrical and temperature limits. The 48-pin SSOP footprint also supports conventional surface-mount assembly rather than requiring a fine-pitch land pattern. For PCB implementation, verify the exact pin assignments, exposed connections, decoupling requirements, programming interface, and peripheral multiplexing in the manufacturer datasheet before routing signals. Stable power and ground distribution are especially important when analog conversion blocks operate near the lower end of the 1.71 V to 5.5 V supply range. Programming requires a compatible Cypress/Infineon programming tool and an appropriate debug or programming adapter. This page organizes the core specifications, package information, sourcing details, drop-in replacement candidates, comparison parameters, and application guidance for the CY8C3446PVI-082. It also highlights where a candidate differs in speed or temperature grade, helping engineers distinguish a true same-footprint substitution from a broader functional alternative.

Permintaan RFG Kontak
CY8C3446PVI-102 - 50MHz 8051 PSoC 3 MCU | Infineon
CY8C3446PVI-102

CY8C3446PVI-102 - 50MHz 8051 PSoC 3 MCU | Infineon

The Infineon CY8C3446PVI-102 is an 8-bit PSoC 3 programmable system-on-chip microcontroller with an 8051 processing architecture, operation up to 50 MHz, 64 KB of Flash memory, and 8 KB of SRAM in a 48-SSOP package. Its 1.71 V to 5.5 V operating range makes it suitable for embedded control applications operating from low-voltage digital rails, while its integrated CAN/LIN networking capability supports connected industrial, automotive, and consumer equipment. A PSoC, or programmable system-on-chip, combines a microcontroller core with configurable analog and digital peripheral blocks on one integrated circuit. This product belongs to the CY8C34xx PSoC 3 family, whose 8051 core is supplemented by Universal Digital Blocks, a configurable ADC, communication peripherals, timers, and programmable interconnect. The result is a platform that can consolidate functions that would otherwise require a separate microcontroller and several discrete peripheral devices. The verified device data identifies 24 Universal Digital Blocks, two data pointers, 27 interrupt sources with eight priority levels, one Peripheral Hub Unit with eight parallel access paths, 64 KB of program Flash, and 8 KB of SRAM. It also includes a 2 KB data EEPROM and four Flash protection levels according to the Keil device record. These resources support structured firmware, concurrent control tasks, protocol handling, and protection of firmware intellectual property. Operation up to 50 MHz provides headroom for responsive control loops and mixed peripheral workloads. The configurable peripheral architecture allows designers to implement timers, serial interfaces, signal processing, and communication functions in hardware instead of relying entirely on CPU software. Because the supplied records identify CAN and LIN networking, the device is positioned for both higher-speed CAN networks and lower-cost LIN subnets commonly found in vehicle and industrial control networks. Typical applications include CAN-connected industrial controllers, LIN peripheral modules, automotive body electronics, motor and valve control, compact sensor hubs, and low-cost appliances. The 48-SSOP package supports compact through-hole PCB layouts, although pin density and thermal performance should be considered carefully in designs operating at elevated ambient temperatures. When designing around the CY8C3446PVI-102, confirm the device's complete pinout, exposed programming and power connections, peripheral routing options, and electrical limits against the manufacturer datasheet. The verified distributor listings do not provide a complete pin table, so engineers should not infer missing pin functions from the package outline. This page combines verified distributor and device-profile data with practical application guidance, comparison parameters, and engineering caveats. It is intended to support component identification and initial design planning while clearly separating confirmed values from parameters that require manufacturer-datasheet review.

Permintaan RFG Kontak
CY8C3645AXE-169 - 48MHz 32KB Flash MCU | Infineon
CY8C3645AXE-169

CY8C3645AXE-169 - 48MHz 32KB Flash MCU | Infineon

Infineon Technologies CY8C3645AXE-169 is an 8-bit PSoC 3 CY8C36xx programmable system-on-chip microcontroller with an 8051 core, a 48 MHz operating frequency, and 32 KB of flash memory. The device is supplied in a 100-pin TQFP package measuring 14 mm by 14 mm. Its operating-voltage range is 0.5 V to 5.5 V, making it suitable for embedded control systems that combine programmable digital logic, analog functions, and microcontroller processing in one integrated device. A PSoC 3, or programmable system-on-chip, is a mixed-signal microcontroller architecture that integrates a CPU, programmable analog and digital peripheral blocks, and signal-processing resources. This system-on-chip approach can reduce the number of separate components needed when a design requires sensor measurement, control logic, data processing, and digital communication. Within the component hierarchy, the CY8C3645AXE-169 belongs to the CY8C36 family of 8-bit microcontrollers and combines MCU functionality with configurable analog and digital peripherals. The principal verified specifications are a 48 MHz clock, 32 KB flash memory organized as 32K by 8 bits, an 8051 instruction-set core, and a 0.5 V to 5.5 V supply range. These parameters position the device for compact embedded-control applications requiring moderate processing speed and integrated programmable resources. The 100-pin TQFP package provides a substantial pin count for external sensing, communication, control, and mixed-signal connections compared with smaller microcontroller packages. The CY8C36 family architecture supports signal acquisition, signal processing, and control through configurable blocks. This enables designers to implement functions such as analog sensing, digital logic, and communications control around a common programmable platform. The 32 KB embedded flash provides on-chip program storage, while the 48 MHz operating frequency supports faster execution than basic low-speed 8-bit control devices. Exact RAM, peripheral count, GPIO count, and converter performance require confirmation from the manufacturer datasheet. Typical uses include industrial sensing and control modules, building automation interfaces, consumer product controllers, communication equipment, and embedded systems requiring programmable analog and digital blocks. The device may also be evaluated in educational and prototype platforms because its broad peripheral integration can simplify board partitioning. Firmware compatibility and peripheral availability must be checked for each exact family member before production use. A key design consideration is package complexity. The 100-pin TQFP footprint requires careful escape routing and adequate PCB land-pattern accuracy. Designers should also verify the selected voltage range, clock configuration, pin multiplexing, and power-supply requirements against the manufacturer datasheet rather than assuming that every CY8C36 member has identical resources. The verified distributor data identifies the CY8C3645AXE-169 as a 100-TQFP, 14 mm by 14 mm device.

Permintaan RFG Kontak
CY8C3646AXE-170 - 48MHz 8-Bit PSoC 3 MCU, 64KB Flash | Infineon
CY8C3646AXE-170

CY8C3646AXE-170 - 48MHz 8-Bit PSoC 3 MCU, 64KB Flash | Infineon

The Infineon Technologies CY8C3646AXE-170 is an 8-bit 8051-compatible PSoC 3 (CY8C36xx) mixed-signal microcontroller running at up to 48 MHz with 64 KB (64K x 8) of embedded flash memory, supplied in a 100-lead TQFP (14 x 14 mm) package with an operating supply range of 0.5 V to 5.5 V. What is a PSoC 3? A programmable system-on-chip (PSoC) is an MCU family that integrates a CPU core, embedded flash and SRAM, and configurable analog and digital peripheral blocks onto a single die. The 8051 core inside the CY8C36xx family executes at up to 48 MHz, while on-chip programmable blocks let a design route analog sensors, comparators, timers, serial interfaces, and USB connectivity onto dedicated silicon instead of discrete components. In the system hierarchy, a PSoC 3 sits between a plain 8-bit microcontroller and an application-specific mixed-signal SoC: it is a microcontroller with configurable analog and digital peripherals rather than a fixed-function device. Key features of the CY8C3646AXE-170 include 64 KB of flash for firmware and bootloader code, 8-bit CPU architecture with multi-cycle multiplier hardware for efficient 16-bit and 32-bit math, and a supply range from 0.5 V to 5.5 V that covers both 3.3 V and 5 V system rails. The -170 suffix designates the -40 C to +85 C industrial temperature grade, and the AXE package code designates the 100-pin TQFP industrial package. Because the CY8C3646 family is part of the wider CY8C36xx platform, designers can reuse the same toolchain, PSoC Creator software, and peripheral configuration approach across multiple CY8C36xx devices while changing flash density and pin count to fit the end product. The wide range of on-chip peripherals reduces external component count and simplifies PCB layout in space-constrained designs. Typical applications include human interface devices, capacitive touch keypads, battery-powered portable measurement equipment, industrial control panels, sensor conditioning and data logging modules, and USB-connected debug or programming accessories. Because the device carries 100 leads, it exposes a large number of general purpose I/O and dedicated peripheral pins for mixed analog and digital signal chains. One design consideration worth noting: the 100-lead TQFP body is 14 x 14 mm, which is larger than the 48-pin or 32-pin alternatives in the family. Plan the footprint and pin escaping early in the layout stage if the enclosure is tight, and confirm that the 0.5 mm lead pitch suits the assembly process. This page consolidates parametric detail, drop-in alternatives in the same 100-TQFP footprint, a package-confirmed comparison table, and practical design notes so that engineers can qualify the CY8C3646AXE-170 quickly before committing to a PCB spin.

Permintaan RFG Kontak
CY8C3646AXE-178 - 8-Bit 48MHz 8051 MCU | Infineon Technologies
CY8C3646AXE-178

CY8C3646AXE-178 - 8-Bit 48MHz 8051 MCU | Infineon Technologies

Infineon Technologies CY8C3646AXE-178 is an 8-bit 8051-compatible PSoC 3 CY8C36xx microcontroller operating at up to 48 MHz with 64 KB of flash memory and a 0.5 V to 5.5 V supply range. It is packaged in a 100-pin TQFP (14 mm x 14 mm) package. The device is identified in the verified distributor data as an automotive-oriented 3.3 V/5 V MCU, with the complete ordering suffix -178 identifying the specific package, temperature, qualification, and configuration. What is an 8-bit MCU? An 8-bit microcontroller is a programmable embedded controller whose central processing unit operates on 8-bit data words. The CY8C3646AXE-178 belongs to the 8051 MCU family and combines a general-purpose CPU with embedded flash, digital peripherals, and mixed-signal-capable PSoC resources. This hierarchy places it between simple fixed-function controllers and higher-performance 32-bit microcontrollers used in industrial, automotive, and consumer applications. The verified specifications identify 48 MHz operating frequency, 64 KB (64K x 8) flash, an 8051 instruction-set core, and a 0.5 V to 5.5 V operating-voltage range. These headline values make the part suitable for embedded control, communication, sensing, and general automotive electronic modules where deterministic 8-bit processing and integrated nonvolatile program memory are useful. Exact RAM capacity, peripheral configuration, GPIO count, ADC characteristics, and automotive qualification details require confirmation in the manufacturer documentation. The CY8C36xx architecture is positioned for connected embedded designs that need more control capability than a basic 8-bit device but can benefit from the simple programming model and resource integration of the PSoC 3 family. Its 48 MHz clock rate provides additional processing headroom for protocol handling, state-machine control, and mixed-signal system management, subject to the resource limits and electrical conditions specified by the manufacturer. Typical uses include automotive body and comfort modules, sensor nodes, actuator controllers, industrial interfaces, and embedded communication equipment. The 100-TQFP package provides many external connection points, but its relatively large 14 mm x 14 mm footprint requires adequate routing space, thermal copper, and assembly clearance. Designers should also account for automotive qualification, clock configuration, supply sequencing, and the exact peripheral assignments associated with the selected device variant. A primary design consideration is to validate the -178 ordering suffix against the required package, temperature range, qualification level, and production configuration before PCB release. Because the verified data does not provide the manufacturer datasheet URL, detailed pin map, electrical limits, or calibrated pricing, this page marks those fields as data needed rather than guessing. This page consolidates the supplied distributor specifications, sourcing constraints, and design guidance for faster component review.

Permintaan RFG Kontak
CY8C3665AXA-010 - 67MHz 8051 32KB Flash MCU | Infineon
CY8C3665AXA-010

CY8C3665AXA-010 - 67MHz 8051 32KB Flash MCU | Infineon

The Infineon CY8C3665AXA-010 is an 8-bit 8051-compatible PSoC 3 microcontroller with 32KB of Flash memory, a maximum stated clock frequency of 67 MHz, and a 0.5 V to 5.5 V operating supply range. The component is listed in a 100-pin TQFP package measuring 14 mm by 14 mm by the distributor specification. Its combination of programmable digital and analog peripherals, embedded memory, and an 8051-compatible core places it within the PSoC 3 CY8C36xx family. A programmable system-on-chip is an integrated semiconductor that combines a microcontroller core, memory, configurable digital peripherals, and configurable analog resources. PSoC devices extend the MCU concept by allowing designers to configure peripheral functions in hardware and software rather than relying only on fixed peripheral blocks. The CY8C36xx family therefore serves as a programmable embedded system-on-chip within the broader microcontroller and embedded semiconductor hierarchy. The verified distributor listing identifies 32KB of Flash organized as 32K by 8, an 8-bit 8051 architecture, and operation up to 67 MHz. The stated 0.5 V to 5.5 V supply range provides compatibility with low-voltage digital systems, while the 100-pin TQFP package exposes a comparatively large number of external connections for mixed-signal designs. Exact peripheral counts, SRAM capacity, clock configurations, and electrical limits require confirmation in the manufacturer documentation. Typical implementation areas include embedded control panels, industrial interface modules, data-acquisition equipment, consumer peripherals, and connected products that benefit from programmable analog and digital functions. The 8051-compatible instruction set and integrated peripherals can simplify designs that would otherwise require a discrete MCU plus support ICs. Firmware and peripheral configuration remain design-specific, so the application should be validated against the complete manufacturer documentation before production release. A primary design consideration is package and pin verification. The available distributor records identify a 100-pin TQFP, while another listing describes a 100-LQFP; engineers must therefore confirm the exact package drawing, exposed-pad treatment, and land pattern before layout or replacement. This page combines verified distributor facts, conservative data markers, replacement analysis, and engineering guidance to distinguish confirmed information from values that still require manufacturer confirmation.

Permintaan RFG Kontak
CY8C3665AXI-016 - 67MHz 8051 PSoC 3 MCU 32KB Flash | Infineon Technologies
CY8C3665AXI-016

CY8C3665AXI-016 - 67MHz 8051 PSoC 3 MCU 32KB Flash | Infineon Technologies

Infineon Technologies CY8C3665AXI-016 is an 8-bit 8051-based PSoC 3 system-on-chip microcontroller with a maximum clock frequency of 67 MHz, 32 KB of flash memory, and a 100-pin TQFP package measuring 14 mm by 14 mm. The device combines a microcontroller core, programmable digital and analog blocks, memory, and programmable system resources in one integrated platform. A programmable system-on-chip, or PSoC, is an integrated circuit that combines a microcontroller with configurable analog and digital peripherals. In the broader hierarchy, PSoC devices extend the MCU concept into a system-level programmable platform. CY8C3 devices use an 8051-compatible core with configurable blocks that allow designers to implement control, communication, measurement, and signal-processing functions in a compact embedded design. The CY8C3665AXI-016 is identified as an 8051 PSoC 3 CY8C36xx-family microcontroller with 32 KB of flash organized as 32K x 8. The listed operating supply range is 0.5 V to 5.5 V, while the maximum operating frequency is 67 MHz. Its 100-TQFP package provides 100 external pins and is suitable for designs requiring substantial mixed-signal or digital connectivity. The PSoC 3 architecture includes programmable blocks that can be configured for functions such as digital control, analog sensing, timers, communications, and signal conditioning. This flexibility helps reduce the number of external discrete components in applications that require several peripheral functions. The 8051 instruction set and single-core architecture are established in the PSoC 3 family and are supported by embedded software toolchains and programming environments. Typical applications for this microcontroller include industrial control panels, sensor-conditioning systems, consumer appliances, building automation equipment, communication modules, and compact embedded products. The 32 KB flash capacity is suitable for firmware that includes control logic, device communication, configuration storage, and application-specific routines. Design considerations include verifying the complete pin assignment and alternate-function multiplexing against the manufacturer pin-description table, especially for analog and communication functions. The 100-TQFP footprint also requires careful PCB escape routing, decoupling, grounding, and thermal design. Use the manufacturer datasheet for the authoritative electrical limits, pin names, package dimensions, programming requirements, and peripheral configuration details.

Permintaan RFG Kontak